Hi Jerry,
As i suppose, after a copy tftp start the uploaded config is already stored
in your startup config. What basically a wr mem does is to copy your running
config into your startup config. I.e. after doing a wr mem, your just before
copied file should be overwritten by your current running
Are there any discounts for the CCIE power session aside from
education/gov.'t? My company isn't paying for it, and I'd heavily prefer not
to pay $450 (the $295 discount price is ok).
- Sean
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Daniel Cotts
Se
Has anybody out there dealt with one of these scenarios?!?!
ComCast customer wanting to hook up their PIX 501 to their CableModem, and
use either DHCP, or a "Static" address on the outside interface; NAT and
Dynamic VPN configuration to connect back to HQ PIX also is in this picture.
I spent sev
thanks for your reply!
pls refer first past which is my question.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42507&t=42211
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report miscond
I'm sure someone will respond with a much detailed response, but in the
meantime, know that secret clearance is a very expensive, time consuming
process at the very least. Don't think it's like a Cisco cert that you can
just study or apply for. Usually people already have it from past jobs,
milita
What your problems?
HATO
>From: "yonghai zhang"
>Reply-To: "yonghai zhang"
>To: [EMAIL PROTECTED]
>Subject: RE: Cisco 3640-8AM ---urgent! [7:42211]
>Date: Thu, 25 Apr 2002 01:42:03 -0400
>
>hi,anyboby
>
>if you have some experience with 3640 8AM Module,can i share with you?
>
>thanks.
__
>From the GMPLS/CCAMP TE draft:
Thus we have a more general notion of a TE link. A TE link is a
"logical" link that has TE properties. The link is logical in a
sense
that it represents a way to group/map the information about certain
physical resources (and their properties) into th
The company or organization that will hirer you will take care of the
paperwork.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42503&t=42499
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.htm
hi,anyboby
if you have some experience with 3640 8AM Module,can i share with you?
thanks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42501&t=42211
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/li
one line for u Khalid
"There is no shortcut to success"
Objectives are 90 percent same for both tests then why
worry. I think u r worried all those "shortcuts" or
"Cramming" wont work. If u r prepared give the new one
and save mnoney plus accept the challenge!!!
I am sitting for it on May 6th,
Can you install VNC on the server in question and allow VNC connections
through your firewall to that system? You can close the hole once the
technician is finished.
""Brown, M"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I have to allow an external techinician to work on a
how does one go about getting a secret clearance.
is there a website with this info
what are the requirements
nilesh
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42499&t=42499
--
FAQ, list archives, and subscription info: h
I have broadband connection. I set up a machine with 2 ethernet cards and
hardwired the address received via DHCP on one of my ethernet card (been
working more than 4.5 months). Enabled NAT and I connected 3 more machines
to it. Works just fine.
Nilesh
""hktco"" wrote in message
[EMAIL PROTECTE
hello,
this is what i'm trying to accomplish:
box 1 (a.a.a.a)|
|--- VPN client - IPSec tunnel
| Internet
box 2 (b.b.b.b)|
I'm trying to figure out a way to specify a destination for the IPsec
client that is independent of the a and b addresses.
a
There is a way to do this, but it is shady. I didn't think I would ever see
a reason to use this, but your situation is described exactly in this
document. If you are like most cable/dsl customers you have a bridge in
your house, and your address probably doesn't change all that often. I
believ
>From experience, the Cisco Press book, although very detailed, is perfect
for the exam (it is also good prep for the Pix exam and the VPN exam...money
well spent).
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42492&t=42432
--
F
I think so... working on that now!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42493&t=42402
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations
I used to download configs from cisco router make changes to such as spids
and then -copy tftp start- and wr mem so the changes would be saved to start
config and not affect the current running config so when router was
unplugged and taken to new location it would work with new isdn line.
Now whe
Ah yes, security through obscurity. ;-)
If I would have had to guess, I would have guessed you were using one of the
following VPN products:
1) Cisco
2) Checkpoint
3) Nortel
I would have started with Cisco and assumed either a VPN concentrator or a
PIX. (in your case, I would have hit the first
I went through the TAC help desk and after a couple of hours, it turned
out I just needed to add a : to the end of the copy tftp flash string.
I had previously upgraded 12 2900 switches with out using the : and they
worked fine. Tech said the difference was either IOS ver or hardware
revision. T
I have only ***one*** ethernet interface on 2610 and it needs to be
both a dhcp client and assigned a static IP. i.e. something like:
int e0/0
ip address dhcp
ip add 192.168.1.254 255.255.255.0
but in practice, it is NOT allowed. Also I tried to use subinterfaces,
and again, it won't let me to
Team,
Our company has 17 sites and 12 are using a 1600 router, I want to be able
to dial in to any router via a modem as backdoor trough the console port(I
know the security issue), I looked at the cisco web site for the correct
part number of the rj-45-to-db25 adapter, the one that I found seems
The config is good for the pieces you posted. Is it
working or? If it's not, perhaps theres a extra space
after one of the passwords.
--- "Mirza, Timur"
wrote:
> PAP Using Different Passwords On Two Different
> Routers
>
> on r1:
> username r2 password 0 timur
> !
> int BRI0
> ppp authenticati
Hopefully appropriate, I have the following books for sale:
Exam Cram CCNA (640-507)
Sybex CCNA Study Guide, CD included (640-507)
Osborne CCNP Routing Study Guide, sorry, CD is lost (640-503)
Sybex Routing Study Guide, CD included (640-503)
Osborne CCNP Switching Study Guide, CD included (640-50
All,
So does that mean in 6-8 weeks, the current(non-beta) exam will be no more?
And the new exam will be structured more like the BETA?
Any info would be helpful.I'm sitting the BETA tomorrow as a trial
runKnowing that would be good
Message Posted at:
http://www.groupstudy.com/f
We had a /24 that was not being used in one part of our network any
longer. It was routed through 2 RSM's on a Cat5500 switch.
As well the network was in an EIGRP AS that we do for IGP routing on both
RSM's. So the network was removed from the EIGRP system, a new static
route was put in on our ga
I have to allow an external techinician to work on a third-party application
on my server.
Two options: Use connection through Modem or VPN Client (Cisco 3000
Concentrator).
I would go with the VPN account, and then at the end of the support work I
would disable the GuestTech account and change i
Hi,
I was wondering what you falks think about CCNP boot camps. Are they worth
the
money, is it possible to get CCNP certified in 2 weeks?
Thanks,
Dejan Ristovski
Cisco Technical Support, CCNA
EKONET
Authorized Cisco Distributor
Address:
Partizanski odredi 101, 1000 Skopje
Macedonia
Tel./Fax: +
I ebayed a router a while back, and it seems to be having issues.
So, I need to have it looked over. What do I need to know about the
repair procedure? I imagine it starts with a smartnet contract,
can you folks provide any tips to navigating this so it doesn't
turn into an ordeal? Thanks...
-
"Howard C. Berkowitz" wrote:
> >I'm serious. Is there any reason why MPLS cannot be transported directly
on
> >fiber,
> >perhaps even in time slots? Have the GMPLS and IPO WGs addressed this
issue?
> >
> >-- TT
>
> That's exactly what those two working groups are doing, and other
> groups in the
Why don't you post a complete config and then we could have a better idea?
JR
--
Johnny Routin
The "Routin" One
""Mirza, Timur"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> i don't have isdn in the lab (still looking for a simulator), so one more
> validation question...is
i don't have isdn in the lab (still looking for a simulator), so one more
validation question...is the following a viable callback cfg?:
!calling (client) & called router (server) negotiate w/ ppp lcp to determine
if client requests a callback or server will initiate a callback
!other bri comman
PAP Using Different Passwords On Two Different Routers
on r1:
username r2 password 0 timur
!
int BRI0
ppp authentication pap
ppp pap sent-username r1 password 0 milton
on r2:
username r1 password 0 milton
!
int BRI0
ppp authentication pap callin
ppp pap sent-username r2 password 0 timur
!"
Here's the URL for the CCIE Power Session for the 2000 Networkers. See if it
is useful for you.
padding
padding
http://www.cisco.com/networkers/nw00/pres/3304/3304.htm
> -Original Message-
> From: Logan, Harold [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, April 24, 2002 4:59 PM
> To: [EM
Are the t1's connected to different routers in the providers POP, or to
geographically diverse POP's? Is the IP space your own ARIN assigned space
or the providers? Do you take full bgp routes or just a default or partial
routes? Any answer would depend on the answers to these questions. As fa
Hi all,
I'm looking at some iSCSI devices (particularly Cisco 5420). Does anybody
have any experiences of these bits of kit yet (Positive or Negative).
I realise they're pretty new, but just on the off chance.
If you have any experiences, can you give me a brief idea of the topology
(minimum spee
Hi,
I would like to know if anybody would like to swap the Lab Date. I have
reserved the August 2 date on San Jose, I would like to have any date
between August 6 and September 6.
Thank you
Fernando Saldana
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42471&t=42471
I'm trying to take the Monday one too. I don't know if I'll be able to
though, because there are pseudo-mandatory networking academy events going
on monday. Two of our other instructors are going though, so I'm going to
try and get them to take one for the team while I do the CCIE power session.
T
I am experiencing a similar problem, using one provider with two T1s.
Utilization appears to significantly favor one interface over the other. I
realize there will be some variation, but considering its a discrepancy of
75% vs. 3% (these are numbers from our provider) I've talked to the
prov
Congratulations!
Pierre-Alex
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Koen Zeilstra
Sent: Wednesday, April 24, 2002 3:49 PM
To: [EMAIL PROTECTED]
Subject: RE: All-In-One CCIE Study Guide - Second Edition [7:42292]
Pierre,
Sorry for the confusio
I went to the CCIE power session last year but didn't last real long.
Most of the session seemed geared toward the lab and lots of talk about
the, at that time, proposed 1 day lab.
But if I can get the approval I'll go to the power session again,
things change every year.
Dave
"Steven A.
Pierre,
Sorry for the confusion.
Passed the written. Hurrah!! Very few BGP questions. Lot of TokenRing.
You
better learn the Rossi Paper!
Good luck on yours.
regards,
Koen
On Tue, 23 Apr 2002, Pierre-Alex GUANEL wrote:
| Koen, I was referring to the book written by Roosvelt GILES.
|
| By t
I was going to register for it on that Monday.
""Logan, Harold"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I'll be there. Anyone else planning on going to the CCIE prep power
session?
>
> Hal Logan CCAI, CCDP, CCNP+Voice
> Network Specialist / Adjunct Faculty
> Computing &
Hi,
Having passive for the ISDN int would stop OSPF
multicast hellos from going across the ISDN interface.
You could still do a neighbor statement though which
is unicast however.
If the ISDN is bouncing, it's probably due to a
route-redistribution problem or some form of IP
traffic going out t
Are the CCIE power sessions helpful?
""Logan, Harold"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I'll be there. Anyone else planning on going to the CCIE prep power
session?
>
> Hal Logan CCAI, CCDP, CCNP+Voice
> Network Specialist / Adjunct Faculty
> Computing & Engineeri
Both routes should have come in at approximately the same time, since we
had just done a "clear ip bgp *" within about 30 minutes prior to seeing
these entries. If it is load balancing, then this is good... Its
actually the exact problem I'm trying to fix... One of the T1 links is
pegged, the o
off the top of my head
If these paths were advertised at different times, this could result in
this posting, or be the artifact of some load distribution.
At 03:16 PM 4/24/2002 -0400, Michael Bray wrote:
>I have a router that is running BGP to two different providers... When
>I show the bgp en
Hi,
is there anything like "Cisco CEF MIB".
Thanks,
Ashish
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42460&t=42460
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct a
point.
--Tim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42459&t=42348
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
what about the old one, still the topics is the same
and the questions database still the same cause we
heared about the changing in the CCNP exams is
that also about CCIE old exam 350-001
--- Kris Keen wrote:
> I enquired about this with the CCIE Team. They
> explained the beta runs to
> Ma
I'll be there. Anyone else planning on going to the CCIE prep power session?
Hal Logan CCAI, CCDP, CCNP+Voice
Network Specialist / Adjunct Faculty
Computing & Engineering Technology
Manatee Community College
-Original Message-
From: Tom Lisa [mailto:[EMAIL PROTECTED]]
Sent: Wednesday,
I have a router that is running BGP to two different providers... When
I show the bgp entry for two different routes, it shows that one
provider is selected for one route, and the other provider is selected
for the other route, even though they seem to have the same AS path
length from each provi
By default IGRP and EIGRP don't use reliability and load, as you probably
know. But when IGRP and EIGRP do use them, reliability and load are
dynamically learned. Reliability is the worst reliability for any interface
in the path. It's based on the ability to send and receive keepalives,
CRCs,
What IOS version are you running on this switch? Can you send us output
from:
show flash
show boot
Thanks,
Nick
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Ed Gobeille
Sent: Tuesday, April 23, 2002 7:12 PM
To: [EMAIL PROTECTED]
Subject: IOS upgrade
I have ACS setup and would like our internet VPN routers to use it. I have
created a mapped ip on our firewall for the AAA server. Any known problems
or security issues I should know about? I heard there were some
vulnaribilitiesTIA
Message Posted at:
http://www.groupstudy.com/form/read.ph
Ricky Chan wrote:
>
> Hi all,
>
> I configured a cisco 2600 router behind a ADSL router.
You have your 2660 behind an ADSL Router? or ASDL Modem? If you're behind
a DSL router, then you're more than likely being NATed by the DSL router, in
which case you need to create a static port mapping t
Yes.
Prof. Tom Lisa, CCAI
Community College of Southern Nevada
Cisco ATC/Regional Networking Academy
"Steven A. Ridder" wrote:
> Is anyone attending Networkers in San Diego this year? Just curious.
>
> --
> RFC 1149 Compliant
>
> Get in my head:
> http://sar.dynu.com
Message Posted at:
ht
That instance was Gauge 32 : 1000 (aka 10Mbps).
I'll compare the Cisco mib.
Thanks.
- Original Message -
From: "Kevin Cullimore"
To:
Sent: Tuesday, April 23, 2002 10:26 PM
Subject: Re: I need help with a BVI and MIBs on a Catalyst 8540 [7:42404]
> Does an instance found under 1
I think the answer lies in where GW2.bne gets the better route from which,
according to your output, is currently 203.147.255.156 (a misconfigured
address or type-o)?
At any rate, it appears that device 203.147.255.156 has a better route
through Gw1.bne for the supernet 203.147.144.0/20 which inc
Are you trying to install .bin or .tar file ?
Ed Gobeille wrote:
>
> I'm getting an unusual error while tring to upgrade IOS on several of my
> 2900XL series switches. After doing the copy tftp flash command, I get the
> response from the IOS "copy to or from flash not implemented". TAC site
Oh, how rude of me. I explained the problem without offering a solution.
The easiest (and least likely, considering it appears to be residencial DSL)
is multiple IP addresses. A secondary address that is not a part of the NAT
pool could be addressed from the outside. The next easiest (I hesita
I don't see what that would gain... if floating statics are in use, then
there's no reason to run ospf over the interface. Passive interface prevents
an OSPF adjacency from ever forming, since the interface can't send out
LSA's. Since floating statics are usually frowned upon in in lab scenarios,
It's because you are running NAT overloaded. It assumes that all traffic it
receives on the dialer interface is destined for a machine on the inside and
not for itself. Since there is no static mapping, and no dynamic mapping
for telnet, it is refused. That is assuming you are coming in over th
Hi all,
I configured a cisco 2600 router behind a ADSL router. It is working
perfect, but I can't telnet to my router from outside, it said the target
machine actively refused it. I pasted my router's configuration below,
please advice.
Thanks
Ricky
!
version 12.2
no service pad
service tcp
As I understand it, you are talking about IP forwarding based upon the
application which requires rewriting the layer 3 header. Routers typically
dont rewrite layer 3 headers (save for NAT/PAT), layer 4 devices do...
If I'm not mistaken, NAT/PAT rewrites only source addresses/port, but not
desti
It definitely possible to run a phone survey with IPIVR and CallManger.
Right now, IPIVR cannot record speech (that'll be next version, I beleive)
and converting that speech to text and storing it a database would be around
the next corner. But for caller entered digits (ie touchtones), and
scri
I agree. Are you terminiating the tunnel on gw1.bne? Or do you have
another route from gw1.bne2 to gw1.bne? Becuase it looks like gw1.bne is
learning it's route directly from gw1.bne2. If you could include the config
from gw1.bne, it would help.
Message Posted at:
http://www.groupstudy.com/f
Do a "dir flash:" You should see something like:
OP_Center>dir flash:
Directory of flash:
2 -rwx 1223432 Jun 24 1999 01:26:57 c2900XL-h2s-mz-112.8.2-SA6.bin
3 -rwx 98833 Jun 24 1999 01:26:57 c2900XL-diag-mz-112.8.2-SA6
4 drwx 10816 Jun 24 1999 01:27:10 html
175
Do a "dir flash:" You should see something like:
OP_Center>dir flash:
Directory of flash:
2 -rwx 1223432 Jun 24 1999 01:26:57 c2900XL-h2s-mz-112.8.2-SA6.bin
3 -rwx 98833 Jun 24 1999 01:26:57 c2900XL-diag-mz-112.8.2-SA6
4 drwx 10816 Jun 24 1999 01:27:10 html
175
This is almost as good as when I got an email from Papa John (yes, the pizza
guy) to tell me he'd be out of the office. I've never met the guy, but I'm
glad he told me, I was gonna order a pizza that week!
--Tim
Paulo Cesar Buerger wrote:
>
> Estarei ausente no periodo de 21/01/2002 a 25/01/20
Actually, having not ever sat the Lab, Howard does not place himself in an
awkward position with respect to the NDA. Furthermore, as you point out,
his labs may tend to lean toward practicality instead of being purely lab
oriented which in my opinion, is an excellent thing given once you
even
Anybody know the OID for the CPU utilization for Catalyst switches? I'm
trying to monitor them via MRTG and I can't find any OID's that will work.
I've found 2 different values for the "cmpCPUTotal5sec" and
"cmpCPUTotal1min"...neither of which seem to be working..
Anybody doing this w/ MRTG now
I have remote site using a Cisco vpn 3002 that are running citrix through
the tunnel. When ever they start the citrix client it give the hash below.
We only have two sites getting this. does anyone have any ideas?
Thanks,
IPSec ESP Tunnel Inb: Packet authentication failed, username:
Can anyone tell me the best way to prepare for this exam? I think ill
just get the 1000 page Cisco book, and the boson exams. Any guidance
would be appreciated, am I on the right track? I don't think there are
too many choices for study material for this exam.
Message Posted at:
http://www.gro
If one wishes for routing updates to bring up the link, can one not just use
the "passive-interface" command on the ISDN interface?
If it is a backup link, passive interface will keep routing updates will
keep the link from coming up for updates. Then a couple of floating static
routes on eith
I use Winsyslog (www.winsyslog.com). Great product and outstanding support.
It's not free, but the features and extras are well worth the money.
""Adam Hickey"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Is there a way to setup a syslog server on Win XP without buying one o
Hey guys,
I remeber that there was a CCNP Voice specialization before, but it seems
that
it was dropped by Cisco. Is CQS IP Telephony the equivalent to that one now?
I want to get a Voice Specialization, besides the CCIE. However, I am
thinking
on which one would be better to get first (I preten
Hunt,
I guess you don't have the 203.147.154.0 route in the middle router.
however, you have a
defaut route in it. So, you will experience a routing loop. Check you tunnel
configuration as well. see the following from u :
I have an OSPF connectivity problem. I have 3 routers as follows:
>
>
Is it just me, or does Mr. Strobel have some serious anger management
issues? It seems that almost every post I see from him is a derogatory or
inflamatory message. I guess some people get through their day by finding
the negative things to focus on, but gee, I'll bet that makes the road to
CCIE
The first value in your source-bridge transparent is your virtual ring group
and should match whatever you put in the source-bridge ring-group command.
The syntax is.
source-bridge transparent ring-group pseudo-ring bridge-number tb-group
Parameter Description
ring-group Virtu
At 12:10 AM -0400 4/24/02, Kevin Jones wrote:
>Hello everyone,
>
>I have a question that I have been struggling with for quite some time. Are
>the reliability and load metrics in EIGRP (or IGRP for that matter)
>dynamically learned? If so, why do we manually assign values like we do for
>bandwid
Group,
Sorry to be a little late to the topic, but I've not kept up lately :-)
About 1 year ago I left a company that provided a TAC for Cisco, I don't
know if alot of people
know it or not, but Cisco outsources alot of the TAC support. When I worked
at the TAC we were rated
on two things, the n
This is where the use of DMZ networks comes into play. Typically, for any
host that a firewall permits inbound TCP connections to, a DMZ segment is a
good home. To use PIX-speak, you would place the exposed box on a
"medium-security" interface so that your internal network(s) on your
"high-secur
Hello,
I have 2 2501's and a 2610 all with the lastest ios (12.x) for sale. All
are in great condition. also comes with a DTE/DCE cable for frame simulation
pwer cords and transceiver's. All for $950. If intrested email me at
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/for
4876df1d06279d984daa3fc1756f109a
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=42419&t=42419
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations
Thanks for the replies, I only want to authenticate admininistrators on the
PIX, will let you know how I get on
Cheers
Pat
--
email me on : [EMAIL PROTECTED]
""nrf"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> In such a situation, authorization would be achieved by writ
Thanks Michael and Chris.
It was about an extended acl.
The last entry is an explicit permit.
I will keep an eye on the performance degradation, as
the traffic can be upto E1 and constant.
It's generally internet traffic.
if i'll have time i'll test it in a lab config.
I'll post the results.
Tha
87 matches
Mail list logo