RE: CCSP [7:57713]

Hi, I can't agree more. I won't bother taking another cisco exam that doesn't provide any clear value. CSS-1 has not been widely recognized, and yet it is slated to be retired. I won't expect much coming from CCSP and the three other security cert. I am beginning to have a negative bias on

RE: CISSP Certification [7:57757]

Hi, Official site is http://www.isc2.org and you can find more about short description on http://www.certcities.com All the best for your interest Regards, Leonard Ong, CISSP, CSS-1, CCSE+, CCMSE CCNP, CCDP, MCSE, MCDBA, LCP Network Security Specialist, APAC NOKIA Email. [EMAIL

RE: CCSP [7:57713]

I disagree. CCSP fits in the Cisco Professional Certification scheme much better than CSS1. Also for your additional SAFE exam you geta 3 year cert instead of a 2 year. Looks to me like CSS1 was a proving ground for Cisco before going ahead with a mainline cert like CCSP. I have one more

Re: CCIE requirement: full time networking? [7:57936]

The Long and Winding Road wrote: Symon Thurlow wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi guys, Looking for some feedback as to how difficult it would be to pass the CCIE lab if networking was not your primary role. probably slightly more difficult than if

IPv6 address question: apply EUI-64 at non-ethernet interface [7:58098]

Dear all: I have a question here and have no idea yet. At Cisco IPv6 enable router, we can use interface command ipv6 address ipv6-prefix/prefix-length eui-64 to assign a IPv6 address on it. At ethernet clone interfaces,

Spanning tree loop [7:58099]

Hi All, Please advise how STP participates in the following scenario and why STP fails to stop the loop? |switch A | - |(vlan 7)| (vlan 8) || || |(vlan 1)|(vlan 1) --- |

Is there any switch capable of assigning IP address based on [7:58100]

Hello, Is there any switch which is capble of assigning IP addresses to connected computers based on switch ports. For instance any computer connected to switch port number 1 should always be assigned 192.168.1.10, similarly computer connected to port 2 should get 192.168.1.11 .If yes, what are

Cisco Secure ACS [7:58101]

I have a problem with User-Changeable Password in Cisco Secure ACS version 2.6 on my 2000 server. When I get online with my username and want to change my password, It don't let me, and give me a Login Failed error. But if I change the Max Sessions to 2 ot higher, ev ery thing work fine. What's

RE: hsrp isl trunking [7:57896]

Your instructor is right. We have a pretty big Vlanned network (3000 nodes). The only way for the traffic originating from one subnet to get to another subnet is to go through a router. Therefore, each Vlan (or subnet) needs an individual gateway (router) to get to other subnets. That is why

Cisco DTE/DCE Cable [7:58103]

I am looking for the pinouts for DB60 (DTE) to DB50 (DCE). The cable is configured as DB60 (DTE) to DB50 (DCE). I need to switch it due to device configuration issues. (my 2522 is my frame relay switch and need to be DCE) Can someone point me in the right direction. I check CCO, but have not

Subnet 127 [7:58105]

All, I was using Cisco subnet calculator and it uses subnet 127 for all 1s subnet (the last subnet). Just wondering why it's called Subnet 127. May be I am justing missing some basic here. Any comments, Thanks, mannan Message Posted at:

RE: Is there any switch capable of assigning IP addres [7:58100]

This might sound silly, but could you use a cat 5000 with an RSM or a 6000 with an MSM?. Assign each port on the switch to a seperate vlan, then create a bunch of one ip address dhcp scopes on the RP and assign one scope per vlan. This would have the result of assigning one ip address per switch

RE: Cisco DTE/DCE Cable [7:58103]

Check out the following, as it may be cheaper than building your own... http://www.kg2.com/dbcrosdtedca.html Another vendor would be Anthonypanda.com... You can't beat 30.00 in my opinion... -Mark -Original Message- From: Reza Sharifi [mailto:[EMAIL PROTECTED]] Sent: Tuesday,

Re: BGP Route-Reflector-Client [7:58071]

Hello I guess this helps to solve the problem mentioned. Using the neighbor next-hop-self command on the route reflector will modify next hop attributes only for routes that are learned from eBGP peers and not the intended routes that are being reflected from the route reflector clients. To

RE: Cisco DTE/DCE Cable [7:58103]

Do a search on the first link for the db-60 pinout and the second link should give you the pinout for the db-50 http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/cis2500/2509/acsvrug/cables.htm http://www.pluscom.ru/univercd/cc/td/doc/product/wanbu/igx8400/9_3_30/ig/igxigspc.htm

RE: Cisco DTE/DCE Cable [7:58103]

Ditto! -Original Message- From: Mark W. Odette II [mailto:[EMAIL PROTECTED]] Sent: Tuesday, November 26, 2002 10:01 AM To: [EMAIL PROTECTED] Subject: RE: Cisco DTE/DCE Cable [7:58103] Check out the following, as it may be cheaper than building your own...

Re: OT - network modelling and end-to-end monitoring [7:58087]

Jenny, http://www.nwfusion.com/news/2002/0121barrage.html I think the vendors mentioned in the above link are the main players in this field. HTH --kent - Original Message - From: Jenny McLeod To: Sent: Monday, November 25, 2002 11:15 PM Subject: OT - network modelling and end-to-end

VPN on PIX firewall 506 [7:58112]

I got a Cisco secure PIX firewall 506 and Cisco 1700 series. I would to setup a VPN server and allow 10 remote users with authentication to connect to my company network via VPN client. I don't have any Cisco ACS and I don't have budget to buy it also. Is it possible to setup a VPN network ? Need

router code [7:58113]

Hi all, could someone point me to a resource from where I can view/download sample code that is used in real world routers? I am interested mainly in the tcp/ip implementation. thanks, avinash. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=58113t=58113

Hub-Spoke VPN tunnel problem [7:58114]

Hello gentelmen, Heres my problem. I have - Hub | | spoke | |-- ||LAN address 192.100.70.1 LAN

RE: VPN on PIX firewall 506 [7:58115]

I've used the 506 for VPN before and used a MS radius server to authenticate. A guide is included in the online manual for the PIX. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Tuesday, November 26, 2002 9:08 AM To: [EMAIL PROTECTED]; [EMAIL PROTECTED];

RE: Cisco DTE/DCE Cable [7:58103]

Hi all, By the way, I have nothing to do with this seller. Just passing on a good site to those who are interested. Try this Web Address for Cisco Cables. I do not think that you will be able to beat this. http://www.anthonypanda.com This guy has an excellent reputation on eBay as a Power

Re: router code [7:58113]

Hi, Search in google for Zebra source code,, its a simulator which gives a feel of Cisco routers --Vinay Avinash Tadimalla on 11/26/2002 10:12:05 PM Please respond to Avinash Tadimalla To: [EMAIL PROTECTED] cc:(bcc: Vinay S Jamwal/HSS) Subject: router code [7:58113] Hi all,

RE: Cisco DTE/DCE Cable [7:58103]

Maybe you don't need to change your cable at all. DCE vs DTE is significant at layer 1 for clocking issues. There is also DCE DTE at layer 2 for Frame Relay purposes. The layer 1 DCE does not have to be on the same box as the layer 2 DCE. However if you really want another cable try Pacific

Re: router code [7:58113]

a quick look on google reveals some sources of open source router software, if that's what you had in mind. I don't know anything about any of these people, but you could start here: http://www.ipinfusion.com/products/server/products_server.html http://slashdot.org/code.shtml will probably have

Re: router code [7:58113]

At 4:42 PM + 11/26/02, Avinash Tadimalla wrote: Hi all, could someone point me to a resource from where I can view/download sample code that is used in real world routers? I am interested mainly in the tcp/ip implementation. thanks, avinash. www.zebra.org Message Posted at:

RE: SONET/SDH Restoration ! [7:58082]

Jimmy wrote: Hi, Sorry if the following question sound stupid to you. let say i have 4 nodes. B / AC / D If BLSR is employed, how do i know in which direction is the packet flow from A to C. Depends on how you build the cross-connects in the SONET boxes.

RE: Hub-Spoke VPN tunnel problem [7:58114]

Obviously the issue is on the Spoke router. Without the config I won't be able to tell what exactly is misconfigured. But I would check the access-list first, and if you have NAT configured, check the route-map. -- Lidiya White -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL

STP Managing Cat6 switches on the internet/intranet [7:58122]

Hi All I'm after some ideas on how I should configure the network to allow me to manage some Cat6k's which provide connectivity for internet and intranet based equipment. I don't want routing on the switches as this may bypass the firewalls, and I don't want the switches on the same VLAN as the

Re: Cisco DTE/DCE Cable [7:58103]

Thank you all for your replies. Reza Reza Sharifi wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I am looking for the pinouts for DB60 (DTE) to DB50 (DCE). The cable is configured as DB60 (DTE) to DB50 (DCE). I need to switch it due to device configuration issues. (my 2522

Re: router code [7:58113]

At 5:28 PM + 11/26/02, [EMAIL PROTECTED] wrote: Hi, Search in google for Zebra source code,, its a simulator which gives a feel of Cisco routers --Vinay It's not a simulator, but a full UNIX router implementation under GNU. There is a commercial version called IPinfusion. You can program

CID [7:58125]

Hi Ladies and Gentleman I would like to take this opportunity to thank my Dear Lord Jesus and my family. I passed my CID exam today and let me tell you it ain't no easy exam! Full of tricky Q's and wording well read it well and you'll be fine. Thanks to all for the support, God Bless! Kind

2 IDS modules in a 6509 [7:58126]

Maybe this is a stupid question, but can I use 2 IDS modules in a single switch 6509 chassis to increase scanning throughput? If yes, how does it work? [EMAIL PROTECTED] MetroRed Telecomunicagues Ltda. PanAmirica ParK Av. Guido Caloi, 1000 - Ed. 3 -1:

3550EMI [7:58127]

I did the following on my 3550, I am trying to learn. I just got the Cisco Switch field manual. I don't see any information on Clustering switches, which was a disappointment. Here goes VLAN DATABASE Vtp transparent Vlan 1 name vlan1 Vlan 2 name vlan2 Exit Config t No ip http server

3550-24 Vlan [7:58128]

I deleted all my Vlans by deleting the VLAN.DAT file. Is there any commands for deleting all the port settings. I want to reset all my ports to factory settings. Will a write erase, erase my stored IOS files? I want to keep my images on the switch, but get rid of everything else. Someone said boot

RE: 3550-24 Vlan [7:58128]

try this command - quick trick to return interfaces to defaults, works on routers too from 12.x on. Nice thing here is quickness. No need to wr er and reload... 3550(config)#default interface fa0/1 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=58129t=58128

RE: 3550-24 Vlan [7:58128]

I deleted the config.text on the router, and started over, it now works. Now I need to fire out how to allow SQL to communicate across the 2 VLANS. Brian Building configuration... Current configuration : 2286 bytes ! ! Last configuration change at 14:48:14 UTC Tue Nov 26 2002 ! NVRAM config

Re: 3550EMI [7:58127]

you need to use the command switchport prior to using the command switchport access etc go figure -- TANSTAAFL there ain't no such thing as a free lunch Brian Zeitz wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I did the following on my 3550, I am trying to learn. I just

Re: 3550-24 Vlan [7:58128]

Brian Zeitz wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I deleted all my Vlans by deleting the VLAN.DAT file. Is there any commands for deleting all the port settings. I want to reset all my ports to factory settings. Will a write erase, erase my stored IOS files? I want to

Re: 3550-24 Vlan [7:58128]

Eric R wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... try this command - quick trick to return interfaces to defaults, works on routers too from 12.x on. Nice thing here is quickness. No need to wr er and reload... 3550(config)#default interface fa0/1 too bad this doesn't

Re: 3550-24 Vlan [7:58128]

Brian Zeitz wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I deleted the config.text on the router, and started over, it now works. Now I need to fire out how to allow SQL to communicate across the 2 VLANS. route? set up a routing process on the switch and add the two vlans to

RE: VPN on PIX firewall 506 [7:58115]

Basically you can setup your pix firewall with man vpngroup (poor man approach) as you like. Each of the vpngroup can be described as individual users. Since you don't have the budget for either an ACS or MS (), this is the way to go. I've done this many times on my franken pix

RE: Cisco Secure ACS [7:58101]

I had this same issue a while back but at least you got yours to work, the max sessions I think was just coincidence. Because with our 3030 concentrators this did not work and we were told by TAC that Radius with Expiry with 2.6 ACS would not work but this was fixed in version 3.0. We upgraded to

RE: hsrp isl trunking [7:57896]

The way we have it is 2 routers connected to the 4000 switch with 4 vlans on the switch. Have set up 4 subinterfaces on each router, 1 for each van. Each with a separate ip address corresponding to the vlan number. We have 2 HSRP groups set up with 2 vlans in each group. 1 router will be the

CCIP: Multicast QOS Book .....Any Good?? [7:58137]

Hello, Has anyone used this book by Carl Timm for the CCIP MCast and Qos exam published by Sybex? Is it worth it to buy this book? How much does it help just to pass the exam?Thanks for all your input.Sincerely. Ccip: Multicast and Qos Study Guide Carl Timm Jeff Witkowski [IMAGE] [TABLE NOT

RE: Cat 6500 MSFC1 MRTG [7:58075]

I'm confused as to what options and/or target with specific MIB OIDs to capture MSFC VLAN usage with MRTG. My graphs only shows interface EO0/0...which I think is the out of bandwidth interface. Does anyone have a config file that's a good example? -Original Message- From: Elijah Savage

Re: BGP Route-Reflector-Client [7:58071]

As far as IBGP next-hop-self is nothing. This is only useful while injecting the ebgp routes inside an AS. Your config looks OK. Thanks Jana. Firesox wrote:I am having a hard time with configuring route-reflector-client. I have the following config on the Route-Reflector-Server router. router

Re: VoIP over IP-VPN [7:57880]

Thanks Marshal, for the input!!! Marshal Schoener wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I am using a Cisco 3002 hardware client with a 3000 series gateway from NY to Malaysia... True VPN / IPsec between the 2 sites... We put VoIP across this VPN, and it works

PIX on a PC [7:58142]

I remember a thread a while ago on this topic, but don't ever recall an outcome. Can someone please point me to a resource about it. Thanks, Symon Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=58142t=58142 -- FAQ, list

Console Port Switch Needed [7:58143]

Team, I'm looking into purchasing a console port switch for some of our sites. I'm currently looking into the Dataprobe 4P-MAS model but I thought it was pretty expensive. Does anybody have any advice on what product they use? Thanks. Travis Bolton Web Media CCNP,CCDA Try not to become a man

Re: Multicast QOS Book .....Any Good?? [7:58137]

Cisco Nuts wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hello, Has anyone used this book by Carl Timm for the CCIP MCast and Qos exam published by Sybex? Is it worth it to buy this book? How much does it help just to pass the exam?Thanks for all your input.Sincerely. Ccip:

Re: hsrp isl trunking [7:58144]

Dennis, It's better to have a unique HSRP group for each VLAN. Cisco bases the virtual MAC address on the group. If you reuse the group number, you'll have duplicate MAC addresses. Granted, they're on seperate VLANs and shouldn't matter, but I had a Cat4000 that didn't like it at all, and

IPX GRE tunnel for client??? [7:58146]

anyone know if there is a way to tunnel single, remote users over an IPX network? i have a manager who moves to different remote sites, but doesn't want to change his IPX network address. is there a VPN (GRE) client or something of the sort that will allow for this? i'm not familiar enough with

RE: PIX on a PC [7:58142]

I looked through the archives, and got enough info to not bother. Sorry for the wasted bandwidth. Symon -Original Message- From: Symon Thurlow Sent: 26 November 2002 21:27 To: [EMAIL PROTECTED] Subject: PIX on a PC [7:58142] I remember a thread a while ago on this topic, but don't

RE: 3550-24 Vlan [7:58128]

I did the command IP routing, both VLANS have routing enabled. Thanks for the help, I will continue on. I know routing is layer 3, just not sure how I can allow a port across the subnets. I have a SQL server on VLAN1 and one on VLAN2. I will continue researching... -Original Message-

RE: 3550EMI [7:58127]

Actually this setup worked after I deleted the config.text and stared over. Thanks :) -Original Message- From: The Long and Winding Road [mailto:[EMAIL PROTECTED]] Sent: Tuesday, November 26, 2002 3:09 PM To: [EMAIL PROTECTED] Subject: Re: 3550EMI [7:58127] you need to use the command

Re: Spanning tree loop [7:58099]

switch A and B wont talk to each other or cause a loop because you have switch B isolated. STP in your case is set for 3 instances : STP for Vlan 1, Vlan 7 and Vlan 8. A loop would be present if switch B were set for Vlan 7 on both links and STP did not block one of the ports. pauldongso wrote:

Re: hsrp isl trunking [7:58144]

And.. on the new msfc-2 you only get 16 hsrp groups supposedly the issue that chuck states below is not an issue with the new msfc-2 for the 6509's Chuck Church wrote: Dennis, It's better to have a unique HSRP group for each VLAN. Cisco bases the virtual MAC address on

Re: IPX GRE tunnel for client??? [7:58146]

Edward Sohn wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... anyone know if there is a way to tunnel single, remote users over an IPX network? i have a manager who moves to different remote sites, but doesn't want to change his IPX network address. is there a VPN (GRE) client

Re: hsrp isl trunking [7:58144]

I think the 'use-bia' may have been a fix for the problem as well. It's been a while since it happened. For all I know it might have been a problem with the CatOS on the switch. Chuck Church CCIE #8776, MCNE, MCSE - Original Message - From: Larry Letterman To: Chuck Church Cc:

Little Help Please blocking pop ups and ads with pix [7:58154]

All, I know you can block ActiveX and Ads with url filtering on the pix combined with websense. Well using it at home websense is definitely overkill. I was wondering if there is another way to block this garbage with the pix without it, I would hate to put software on each computer in the house

Preparing for Support exam [7:58156]

Hi there, I was wondering as to what is the best way to prepare for the support exam? Thanks in advance. Cheers, Kenan Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=58156t=58156 -- FAQ, list archives, and subscription info:

Training material for Cisco IP Telephony Support Specialist [7:58157]

I am planning to study for Cisco IP Telephony Support Specialist. Would anyone provide best practice exams, training materials, and books for such certification. Thanks much. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=58157t=58157

Re: Spanning tree loop [7:58099]

At 10:41 PM 11/26/2002 +, Larry Letterman wrote: switch A and B wont talk to each other or cause a loop because you have switch B isolated. STP in your case is set for 3 instances : STP for Vlan 1, Vlan 7 and Vlan 8. A loop would be present if switch B were set for Vlan 7 on both links and

Re: Multicast QOS Book .....Any Good?? [7:58137]

I heard from Wendel Odom himself that he is coming out with a Cisco-press QoS book for the Exam, so I'd wait for that. I thought I heard December. -- RFC 1149 Compliant. dre wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Cisco Nuts wrote in message [EMAIL

Re: 3550-24 Vlan [7:58128]

yeah but it sure comes in handy for the lab...will you actually be able to enjoy your turkey dinner this year...i mean with a week to go and all...good luck... - Original Message - From: The Long and Winding Road To: Sent: Tuesday, November 26, 2002 12:13 PM Subject: Re: 3550-24 Vlan

CCIP MCast and Qos Exam......How tough?? [7:58161]

Hello, Has anyone taken the CCIP Mcast and Qos exam? Need to know how tough it is going to be. Do they drill you in the intricacies of PIM-SM, DM, Diffserv using DSCP, NBar etc. Now, I have been told my some that since this exam is like 2 exams combined into one, the exam questions are going to

question on Nortel networks [7:58162]

Hi all, I have a Passport MUX 4460 and Merdian option 11c at one of my branch office and same Nortel passport 4460 and an INTERTEL PBX at our New York office. We have 512Kbps IPLC connecting these 2 offices . When call is received from US the voice is clear , but when we call from our India

Re: Little Help Please blocking pop ups and ads wi [7:58155]

If you stop going to those porn websites, you wont have that problem! :) How many computers do you have at home? I would just put pop-up blocking programs on each of the computers at home that you want it on. You dont have more than 5 computers you use to surf do ya? thanks, -Brad Ellis

Re: Spanning tree loop [7:58099]

Peter van Oene wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... At 10:41 PM 11/26/2002 +, Larry Letterman wrote: switch A and B wont talk to each other or cause a loop because you have switch B isolated. STP in your case is set for 3 instances : STP for Vlan 1, Vlan 7 and

RE: Little Help Please blocking pop ups and ads wi [7:58155]

Nah Brad got children at home no porn for me but I know you are enjoying it LOL. Hey thanks for the reply but I only surf on 1 computer but got 8 on the network here where any child or visitor can sit down and get on the net, I know a little overkill, but it is nice I get comments on it all the

Re: Spanning tree loop [7:58099]

Hi Peter, In a simpler analogy. vlan 7 would be a seperate switch with a connection to the vlan 1 switch... vlan 8 would be a seperate switch with a connection to the vlan 1 switch.. no loop exist between any part of the 3 networksvlan 7 and 8 are isolated from each other. So stp sees

Re: Spanning tree loop [7:58099]

looking at this again - question below -- TANSTAAFL there ain't no such thing as a free lunch pauldongso wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi All, Please advise how STP participates in the following scenario and why STP fails to stop the loop? CL: where are

RE: question on Nortel networks [7:58162]

Hi Guruprasad, http://groups.google.com/groups?hl=eslr=ie=UTF-8group=comp.dcom.sys.bay-networks and http://groups.google.com/groups?hl=eslr=ie=UTF-8group=comp.dcom.sys.nortel might help you Guruprasad Sanjeevi wrote: Hi all, I have a Passport MUX 4460 and Merdian option 11c at one of my

Re: 1750 router boot loading problem [7:58028]

What is the router doing? At what point is it broken? Does it try to boot the image? Is it stuck in a loop? You can try CNTRL-BRK, but I know that this will not work with some versions of Microsoft Hyperterm. You can try hyperterminal Private edition

Re: Spanning tree loop [7:58099]

On Tue, 2002-11-26 at 23:16, Larry Letterman wrote: Hi Peter, In a simpler analogy. vlan 7 would be a seperate switch with a connection to the vlan 1 switch... vlan 8 would be a seperate switch with a connection to the vlan 1 switch.. no loop exist between any part of the 3

Cisco CSS load setting [7:58171]

Hi All, I have a pair of CSS 11150 switched (vrrp configured for redundancy) configured for load balancing between 2 web application server (Layer 5).The setup up was working alright and we tested the load balancing and the request used were going to both servers on round robin. Now I am