Anyone know the delay on a packet going through a SAR. I am experiencing a
delay of 80 ms on a 155 pipe end to end. No errors or anything which would
normally suggest delay. The only major delay item is the SAR, hence the
question. This ping packet is a normal packet size.
Thanks
__
Quick and easy way to find out if the packet is reaching each segment is
.
On each interface i.e. interface where user is, interface where DHCP server
is do...
ip accounting output-packets or just plain old ip accounting.
you should then do show ip account.
This should show you the ip addr
http://www.cisco.com/cgi-bin/Software/Iosplanner/Planner-tool/iosplanner.cgi
?majorRel=12.1
watch the word wrap. You will also require cco login for this.
-Original Message-
From: Ravi Kumar [mailto:[EMAIL PROTECTED]]
Sent: 23 February 2001 10:38
To: [EMAIL PROTECTED]
Subject: 2600 ro
Please see inline.
-Original Message-
From: Ravi Kumar [mailto:[EMAIL PROTECTED]]
Sent: 23 February 2001 10:57
To: [EMAIL PROTECTED]
Subject: 2600 router - async port configuration
hi techs
I have 2610 router with 2 port sync/async card.
I want to use one of the async port to dial int
When using dialer watch you should still configure your isdn line as normal.
If you do not specify interesting traffic then the isdn line wont come up.
-Original Message-
From: Nonnweiler Daniel [mailto:[EMAIL PROTECTED]]
Sent: 25 February 2001 11:04
To: [EMAIL PROTECTED]
Subject: Dialer
Does anyone out there use the Cisco Network Designer tool? If so what are
your views on it.
Here is the link to view the actual tool.
http://www.cisco.com/partner/cnd/inside.html
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.h
Hello,
Can anyone let me know where I can fine a copy (free or otherwise) for a sun
solaris server. Much appreciated.
Robert McCallum
10 days till first born is due, 6 months till CCIE lab due.Which
will be worse
_
FAQ, list archives, and subscriptio
yes, but only if he then connects another link to another hub / switch and
causes a bridging loop.
-Original Message-
From: John Chang [mailto:[EMAIL PROTECTED]]
Sent: 01 March 2001 15:08
To: [EMAIL PROTECTED]
Subject: Portfast
In the below website it says not to have portfast on if you
member run about like loonies
trying to find this fault which occurs only when the user decides to switch
on his equipment.
-Original Message-
From: John Chang [mailto:[EMAIL PROTECTED]]
Sent: 01 March 2001 15:34
To: McCallum, Robert
Subject: RE: Portfast
Let me see if I got this correct. If
I am afraid that's where you are slightly of topic. CLNS and ISIS do go
hand in hand. Whether you are only routing IP with ISIS or not CLNS routing
still occurs. Whilst in the lab you will not have to implement Clns IF ISIS
goes belly up you might have to debug CLNS packets to find out what is
pigs fly!!
I don't think the farmers would be too chuffed at that, with the rate that
the foot & mouth disease is spreading just now, pigs flying would make
things much much worse.
-Original Message-
From: Dennis [mailto:[EMAIL PROTECTED]]
Sent: 06 March 2001 17:15
To: [EMAIL PROTECTED
I am at the moment ploughing through a lab which for the life of me I can't
get it to work. I'm going mad!!!. Scenario is this
Router4---Router3Router5
!
!
!
Let me thank Greg Bensimon and Nigel Taylor for their help in identifying
what the annoyance was. The issue involved is actually policy routing
(YUCK). I had to apply a route map with the appropriate networks hosts and
set the next hop to the hub router. These configurations were done on the
sp
Here is a little poser I have set myself, sometimes I reckon it can be done
and other times I think it can't.
1 router only. 1 ethernet interface is bridging only i.e. bridge group 1
protocol ieee. It has a whole bunch of clients on it. The other interface
has a server on it which talks ISIS.
ip subnet zero is required when you want to use subnet zero i.e. 192.168.0.1
with a subnet mask of 255.255.255.0 is the zero subnet and can only be used
when you have ip subnet zero command. ip classless is another for routing,
with this if a packet comes in for a destination which is not exactl
Hello,
a little while ago robert devito posted a problem very similar to the one
that I am now experiencing. At the time I tried to help to fix his problem
but I am unsure if Robert got a solution from anyone. I said at the time
that he was mad to try it but unfortunately now I have to do it fo
i'm afraid not. MTU is 1500 on every interface.
Nice try though!
-Original Message-
From: Kevin Wigle [mailto:[EMAIL PROTECTED]]
Sent: 20 March 2001 16:29
To: McCallum, Robert; 'Ccielab' (E-mail); Cisco@Groupstudy. Com
(E-mail); a bratchell; graham; john bermingha
: 'McCallum, Robert'
Subject: RE: ISIS / IRB and BVI interfaces
What is the output from "debug isis adj packets"?
-Original Message-----
From: McCallum, Robert [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, March 20, 2001 9:24 AM
To: 'Kevin Wigle'; McCallum, Rob
I would say yes. All he needs is a policy which could say for example... if
you try to go to microsoft go through 1 ISP and any other site through the
other ISP.
In all - BGP can do whatever you want it to do - whatever the companies
policy is.
No flames please.
Robert McCallum CCNP CCDP
CCIE W
Hi,
I have just received the beautiful news that I have passed the CCIE Written.
At the moment I am still typing with my hands trembling from the experience.
For those of you who have still to sit this exam good luck. I personally
didn't enjoy the experience as from question 50 I thought I had f
first thing is does your internal routing protocol know where it is?
-Original Message-
From: suaveguru [mailto:[EMAIL PROTECTED]]
Sent: 08 December 2000 06:27
To: [EMAIL PROTECTED]
Subject: distribute list problem
Hi,
I have already configured BGP for but our trafiic for
IP
Address
Well, well, well.
With no studying for this exam the outcome was inevitable. I am not to
bothered as Wednesdays pass eludes all.
Anyway for those people looking to sit this written exam here is the break
down.
Passing Score 60% --- sounds easy doesn't it!
Access Technologies
Access protocols
I am not sure if this will cause the symptoms which you are experiencing but
it will not help. You should turn on port fast. This will stop spanning
tree algorithm being computed every time someone turns on a pc.
Try this. It might not help but really should be done!
-Original Message---
see if any of these help.
http://www.cisco.com/warp/public/474/index.shtml
-Original Message-
From: Zhiping Li [mailto:[EMAIL PROTECTED]]
Sent: 13 December 2000 12:04
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: how to recover password of cat5000?
Hi,meganac,
i read your ma
Yes you can just swap out the DC for the Ac or vice versa. Not to sure of
where you can get a cheap supply though!
-Original Message-
From: lee [mailto:[EMAIL PROTECTED]]
Sent: 22 January 2001 12:21
To: [EMAIL PROTECTED]
Subject: 2500 power supply from DC to AC
Hi all, just a simple qu
Hats off to the person who was actually mad / desperate enough to do this!!!
-Original Message-
From: Daniel Cotts [mailto:[EMAIL PROTECTED]]
Sent: 22 January 2001 14:54
To: 'lee'; [EMAIL PROTECTED]
Subject: RE: 2500 power supply from DC to AC
If you're brave, here is an alternative sol
try ebay there are usually some there. You will probably need an IBM 8228
and the correct cables OR you can get RJ45 to token ring converters and
plugged them into the IBM 8228. The converter part numbers are AM 017 Token
Ring Direct.
-Original Message-
From: Mark Rose [mailto:[EMAIL P
Building Cisco Remote Access Networks. Cisco Press. ISBN number
1-57870-091-4.
-Original Message-
From: Chiao Liang [mailto:[EMAIL PROTECTED]]
Sent: 22 January 2001 15:43
To: [EMAIL PROTECTED]
Subject: BCRAM
Hi All,
I'm taking my BCRAN exam in three weeks time, would like to seek adv
As a rule of thumb Frank, turn off all and everything that is auto sensing
or auto anything. The best way to do anything is to manually get it right.
There is a document on the cisco website, at the moment I do not have access
to it, which describes the reasons for the errors and auto sensing
nig
Title: Monitoring/Troubleshooting Catalysts : what does this SYSLOG output mean?
Make
sure that both of the ports are manually set to 100 meg full duplex. I
believe your 5000 cat is auto negotiating and this is your trouble. do set
port speed ?/? 100 then set port duplex ?/? full. ? being
As Chuck has suggested. Read all questions carefully. This will be the
most obscure exam you will probably sit to date. Make sure you study hard
and give this exam more respect than any of the CCNP exams. Good luck.
P.S. you can go back so mark the dodgy questions and go back at the end.
--
Ill try a shot in the dark (the most commonest faults). Did you place your
clock rate on the wrong router? You have to put the clock rate on the DCE
end of the cable. You can check this by doing show controllers or indeed
just reading the cable ends.
Hope this helps. If it doesnt do as Jenny
How are you trying to connect the routers back to back. Serial? Ethernet?
Token Ring? blah blah
-Original Message-
From: Henk Botha [mailto:[EMAIL PROTECTED]]
Sent: 28 September 2000 09:27
To: [EMAIL PROTECTED]
Subject: Re: Back to Back
Hi
My config is OK.
Stupid question do I need a
on a quick scan i would say you have a routing loop my friend. Check the 2
routers which are associated with these addresses - if you can.
-Original Message-
From: Watson, Rick, , OUSDC [mailto:[EMAIL PROTECTED]]
Sent: 28 September 2000 13:47
To: [EMAIL PROTECTED] (E-mail)
Subject: Tra
Hi people,
I have became totally insane and have booked myself on the CCIE design
written exam on the 27th October. Why? I have no idea. Anyhow do any of
you have any ideas, tips on what to expect in this exam. I have of course
downloaded the Cisco exam list and have read most of the books, al
well done that man!. Good luck for your future studies. I presume there
will be a few beers at the weekend. However no one except us in networking
know exactly what you have achieved. So well done and I'll raise a glass or
a few to you on Saturday night.
-Original Message-
From: Yongz
See if this helps.
To get the Cisco documentation to work under Windows 2000:
- Run regedit
- Locate HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/IE4/Setup/Path
- Change the value from "%programfiles%\Internet Explorer" to the location
where IE is installed on your system, for example "C:\Program Fil
a stab in the dark. Different IOS versions? Less memory in the router?
-Original Message-
From: sss s [mailto:[EMAIL PROTECTED]]
Sent: 29 September 2000 11:21
To: [EMAIL PROTECTED]
Subject: Problem after 2501 to 2503
Hi all,
I have a 2501 router connecting to my ISP.Last week
>From your initials under your name I would say that you had more than a
little of the router mumbo-jumbo under your belt. I would say probably no
it is not possible to fluke it, but hey anything possible.
-Original Message-
From: Scott M. Trieste [mailto:[EMAIL PROTECTED]]
Sent: 29 Sept
When you plug in your other port the port will go into listening, learning
states. In lamens terms the port sends out a frame and if it hears it back
it will block - if it doesnt it will forward. Please see link below:-
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_5_2/config/
I would study most topics relating to remote access networks!!
Just kidding! I read the Cisco press book (Building Cisco remote access
networks) and purchased a Boson exam and then cruised this exam. Most
people (including myself) tend to find this is the easiest exam of the 4.
But that's not
The answer is in the question. They say an 11 bit SUBNET MASK. So the
natural mask is as you say class B which = 255.255.0.0 hence you then have
an eleven bit SUBNET mask. Which is 255.255.255.224 as you say. Tricky
questions put in there to catch you out.
-Original Message-
From: Nei
Title: RE: stupid questions
Yes
Frank you are right here. BUT the original question was can you have 2
Ethernet ports on the SAME router in the SAME subnet. Which from this
question Rik is perfectly correct.
-Original Message-From: Frank
[mailto:[EMAIL PROTECTED]]Sent: 10 Octo
It is entirely up to you as to what group number you choose. Logic tends to
say you should use the same numbers so that fault finding and general logic
is easy to follow. But at the end of the day you could have group number 1
within vlan 12 if you wished.
Hope this helps.
-Original Messag
very impressive Mr Rodgers!
-Original Message-
From: Rodgers Moore [mailto:[EMAIL PROTECTED]]
Sent: 11 October 2000 07:31
To: [EMAIL PROTECTED]
Subject: Re: challenge problem
Ok, I'll take a stab at it.
First a question. Have there been any BERT tests end to end (NID to frame
switch i
no
-Original Message-
From: Peter Gray [mailto:[EMAIL PROTECTED]]
Sent: 11 October 2000 21:04
To: [EMAIL PROTECTED]
Subject: Bandwidth change
Is it necessary to reboot router after changing bandwidth?
_
Get Your Pri
Have you checked the archives This question has been asked nearly every
2 weeks!.. anyway
No there are no scenario questions and I have been told that the CID will
help towards the CCIE. IF not in context but in the way the paper is
written. I presume you are looking to sit this exam! If
study!
-Original Message-
From: Craig E. Smith [mailto:[EMAIL PROTECTED]]
Sent: 12 October 2000 19:45
To: [EMAIL PROTECTED]
Subject: Support Test
I will be taking the Support test on the 23rd. Can any one offer any
advice? I have passed the Switching and Remote access if I can offer an
study!
-Original Message-
From: Yee, Jason [mailto:[EMAIL PROTECTED]]
Sent: 10 October 2000 07:10
To: cisco@groupstudy. com (E-mail)
Subject: CCDA?
hi anyone
got any tips on CCDA?
jASON
_
FAQ, list archives, and subscription info:
http://www.groupstud
Here is a little poser for you all. Who is / was the youngest CCIE and what
was his / her age when they attained the CCIE?
Robert McCallum
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure v
Ali,
There is a saying in this world. RTFM.
We are not here to do your job for you. If you ask a question which is for
instance -
I have tried to do blah and cannot for the life of me to get it working,
here is the configs can you help, then most of this group will respond with
glee.
However, y
The answer is it depends. How brainy are you? How much experience do you
have? How much time and effort are you prepared to put into the CCNP?
If you prepare yourself correctly then it is achievable in as short or as
long a period as you determine.
I have read on this list some people have do
The best I can do is the explanation I have in front of me. Which is for
example,
If you have a failed upgrade of Flash then the router will most of the time
boot to the Router(boot)> command. If it goes to the ROMMON mode then the
router is not looking for a boot image. At the router(boot)> c
]]
Sent: 13 October 2000 14:10
To: 'Andre' Paree-Huff'; McCallum, Robert; 'paul brown';
[EMAIL PROTECTED]
Subject: RE: CCNP CERT !!
What's all this bragging about ??
Isn't this group here to help eachother out with problems and with exams and
stuff ?!?!?
I do
Reply to this mail. You will have to delete your flash and download the
same version for this.
Your flash has became corrupt for some reason or another. Reloading wont
help this I'm afraid.
Do an upgrade with the same version and the router will come back up
happily.
Hope this helps
-Orig
This happens (usually) when the router boots up with a limited version of
flash. i.e. bootflash in certain circumstances.
-Original Message-
From: Brian Lodwick [mailto:[EMAIL PROTECTED]]
Sent: 13 October 2000 13:00
To: [EMAIL PROTECTED]
Subject: (boot) mode?
Hello everyone,
I was
check if you can do this:
Router(config)# ip dhcp pool net-172 and press Enter
If it replies with the mode below then your router has the capability of
DHCP server service:
Router(config-dhcp)#
then follow this url to config:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios1
show ip route
you can add a specific by doing
show ip router 192.168.240.1
-Original Message-
From: Israr Akram [mailto:[EMAIL PROTECTED]]
Sent: 16 October 2000 11:42
To: [EMAIL PROTECTED]
Subject: cisco command
in BayAn Router, using "ip routes" with ip address of a certain site w
make s1 the backup for s0. you can then say backup load 128 or 50% and it
will kick in then. Look up the commands for backup interface and backup
load.
Come back if you need more help but you should be able to suss it out
yourself from the above commands
-Original Message-
From: Cristi
mainly because your dialler interface (ISDN) costs a damn site more than a
leased line. Hence the option to use it as a backup circuit.
-Original Message-
From: jeongwoo park [mailto:[EMAIL PROTECTED]]
Sent: 16 October 2000 15:18
To: [EMAIL PROTECTED]
Subject: dialer interface as a backu
I am also sitting it at the end of the month - 27th Oct. I have my CCDP and
have now read Advanced Network Design and Advanced TCPIP. I have genned
myself up on ATM and need to read a LOT more on SNA b4 then. I believe
voice and PIX is in the exam which I know absolutely diddly squat on. SO
let
I might be way of the mark here but shouldn't you be using a dlci number??
-Original Message-
From: Israr Akram [mailto:[EMAIL PROTECTED]]
Sent: 17 October 2000 14:11
To: [EMAIL PROTECTED]
Subject: 2 meg circuit over frame relay.
Hi ,the following is the config. script i will need. The
As
phil has said mate, it is in the question!
They
have probably asked how many bits of subnetting are being used in which case the
answer is perfectly correct. You are giving the answer as the
full mask = natural mask + subnet mask
-Original Message-From: Robert Cabeca
[mai
You do not have any users with passwords specified. PAP will not
authenticate without these. You need to do -
username central password whatever. You should have this on both of your
routers.
as for the line dialer map ip 192.168.0.1 name central broadcast 20
you have specified the word
Make sure all your configurations for vlans / trunks are set to industry
standards rather than cisco specific.
-Original Message-
From: Lakeman, DerrickX [mailto:[EMAIL PROTECTED]]
Sent: 19 October 2000 22:11
To: '[EMAIL PROTECTED]'
Subject: Extreme 7i and Cisco 5509
I have two servers
It was a compromise. Data people wanted no less than 128bytes and Voice
people wanted no more than 32 bytes. SO a compromise was reached.
-Original Message-
From: Andy Xing [mailto:[EMAIL PROTECTED]]
Sent: 20 October 2000 08:59
To: [EMAIL PROTECTED]
Subject: Why 53-bytes for a cell?
only if you have auto sense on. I would however say as you should to auto
sense GOODBYE. Set your 100M port to speed 10 and duplex half. This will
then work better than auto sensing will.
-Original Message-
From: Roland Mok [mailto:[EMAIL PROTECTED]]
Sent: 20 October 2000 11:48
To: [
phone the carrier and get them to test their line. If they say that it is
fine then check your g703 cables.
-Original Message-
From: Ramesh c [mailto:[EMAIL PROTECTED]]
Sent: 23 October 2000 12:50
To: [EMAIL PROTECTED]
Subject: CRC error
Hi cisco guru,
I have a lease line(connected to
www.certificationzone.com
-Original Message-
From: Veronica Tebbe [mailto:[EMAIL PROTECTED]]
Sent: 24 October 2000 06:16
To: [EMAIL PROTECTED]
Subject: CCIE Practice lab
Where is the best place to go for a practice lab or class for CCIE prep?
Any comments here?
V.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120
t/120t1/easyip2.htm#xtocid231010
watch the word wrap
-Original Message-
From: FRS [mailto:[EMAIL PROTECTED]]
Sent: 24 October 2000 15:25
To: [EMAIL PROTECTED]
Subject: Dial Backup
Hi all,
I need your input he
int fast0/0
speed 10
duplex half
-Original Message-
From: Roland Mok [mailto:[EMAIL PROTECTED]]
Sent: 27 October 2000 02:42
To: [EMAIL PROTECTED]
Subject: 100M FastEthernet
Could anyone tell me how to manually force 100M FastEthernet (not
10/100M) to work on 10M Ethernet connection?
__
o.k. o.k. misread the question. You are right.
-Original Message-
From: A. Geoffrey Cauchi [mailto:[EMAIL PROTECTED]]
Sent: 27 October 2000 10:36
To: McCallum, Robert; 'Roland Mok'; [EMAIL PROTECTED]
Subject: Re: 100M FastEthernet
100Mb Fast Ethernet will never work at
Hi ,
Scenario is 2 cat 5509's connected together with an STM-1. Both are in the
same VTP domain but will not speak to each other. Configs are pasted below.
I DO NOT want to have management traffic (vlan 1) traversing across this
link. This link is working just VTP is not traversing. First que
GO away. You have too much time on your hands. THIS email address should
be used for study purposes only. BAN THE IP ADDRESS ASSOCIATED!!!
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: 01 November 2000 15:10
To: [EMAIL PROTECTED]
Subject: Get Paid To
just buy a smart serial x21 cable dte type and a smart serial x21 dce type.
Join them together and hey presto!
-Original Message-
From: Hennen, David [mailto:[EMAIL PROTECTED]]
Sent: 01 November 2000 16:13
To: '[EMAIL PROTECTED]'
Subject: Smart serial port back to back cable
Does anyone
Use backup interfaces. Make the dialer interface the backup interface for
your radio interface.
Enjoy!
-Original Message-
From: Charles Nunie [mailto:[EMAIL PROTECTED]]
Sent: 02 November 2000 13:20
To: [EMAIL PROTECTED]
Subject: Dynamic routing on cisco4500
Hi everyone,
we have imple
Unless I'm reading this wrong the question refers to the CID test while the
answer below refers to the DCN test.
Read Advanced IP Network Design Cisco Press. Routing TCPIP - The illusive
Jeff Doyle and IF you want CCIE network design fundamentals.
Enjoy!
-Original Message-
From: Croy
I personally would get your CCNP before your conquest on to the CID. The
CID is the hardest exam in the series of NP/DP. It also bears no
resemblance to the DCN. The DCN is more scenarios, whereas the CID is more
into the actual workings of the protocols.
In my opinion I would never have pas
Remember to add the word "broadcast" on to the end of your dialer map
statement or else the routing updates will not traverse your ISDN line.
-Original Message-
From: Brian [mailto:[EMAIL PROTECTED]]
Sent: 08 November 2000 22:19
To: Hans Schimek
Cc: [EMAIL PROTECTED]
Subject: Re: Backup I
Afraid not Brad, I am sitting next to a 3620 with 2 * Wic 2t's in it. I
have a 1FE2W module insert into the 3600 which allows the addition of 2 WIC
cards of various flavours.
-Original Message-
From: Brad Ellis [mailto:[EMAIL PROTECTED]]
Sent: 10 November 2000 05:57
To: [EMAIL PROTECTED]
why not?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: 10 November 2000 08:51
To: [EMAIL PROTECTED]
Subject: backup interface on ospf router
Hi all,
Can we have a backup interface on an ospf enabled
router.
for example.
Router ospf 100
network x.x.x.x
...
ospf. ISIS I have found is deployed mainly is Large Telcos.
-Original Message-
From: Jaeheon Yoo [mailto:[EMAIL PROTECTED]]
Sent: 14 November 2000 09:02
To: [EMAIL PROTECTED]
Subject: OSPF vs. IS-IS
Which one is more widely deployed, OSPF or IS-IS?
_
show cdp nei det
or show cdp nei {port number} det
-Original Message-
From: Sites, Bob [mailto:[EMAIL PROTECTED]]
Sent: 14 November 2000 12:57
To: '[EMAIL PROTECTED]'
Subject: switch port IP
Can someone refresh my memory on this. What is the command on a switch that
will show you the I
If it is an introduction you are only looking for then the Cisco web site
has some good pages.
For more detailed IS-IS you can look at Routing TCPIP by Jeff Doyle (The
Bible) or Advanced IP network design by Cisco press.
For the Cisco web site follow the link below. Watch the Word wrap
ht
Hellooo,
Me again with the 'orrible ISIS questions. Here goes.
Scenario is as below.
ROUTER A --- ROUTER B -- ROUTER C --- ROUTER D ROUTER E
- ROUTER F
O.k. All routers are level 2 only i.e. all in different domains / areas.
What I require is for Router C to be able
sorry
folks, one of those days. Up to my ears in ISIS. anyhow,
Juan, do not feel despondent, take from the exam the areas in which you
are short in, get a book or other study method, study them for around a
week and sit the exam again. I bet you'll pass it
then.
Good
luck.
-
1st of
all it might be good of you to tell us WHICH test you are writing
about!
-Original Message-From: Juan Blanco
[mailto:[EMAIL PROTECTED]]Sent: 16 November 2000
13:41To: '[EMAIL PROTECTED]'Subject: Closest to the
real one...
Folks,
I have being taken the
Chuck, come on IS-IS is an "OPEN" standard. I am the total opposite to you
as to say I have no been without it in 2 companies that I have worked for.
As for when you should use it - to be honest I am hearing of more and more
businesses using it as people are starting to "think" that IS-IS is m
yes
-Original Message-
From: Doug Laing [mailto:[EMAIL PROTECTED]]
Sent: 21 November 2000 12:36
To: [EMAIL PROTECTED]
Subject: HSRP question
When using HSRP, what happens when the primary gateway goes down, then
back up? Does it become the primary again?
Thanks.
_
To ping your own interface you have to do a frame relay map statement to
your own ip address to the corresponding DLCI. Otherwise you can't ping
your own frame interface.
-Original Message-
From: Niraj Palikhey [mailto:[EMAIL PROTECTED]]
Sent: 26 March 2001 13:21
To: [EMAIL PROTECTED]; [
Here is a scenario which caught me out BIG time in a real life situation
using ISIS.
To make it easier
Router A has a serial connection to Router B
Everything is up layer 1 & 2i.e CDP can indeed see Router B if you are on
Router A and vice versa. Router B can't see any routes from Router A or
From: Priscilla Oppenheimer [mailto:[EMAIL PROTECTED]]
Sent: 13 April 2001 02:05
To: [EMAIL PROTECTED]
Subject: Re: Unusual Aspect of a duplicate IP Address [7:353]
At 01:09 PM 4/12/01, McCallum, Robert wrote:
>Here is a scenario which caught me out BIG time in a real life situation
>using
ADJANCIES. another result is that two interfaces with IP
addresses from completely different subnets can become adjacnet."
Is Jeff Doyle wrong?
>From: "McCallum, Robert"
>To: 'tom cheung'
>Subject: RE: Unusual Aspect of a duplicate IP Address
>Date: Sat, 14
Just a side thread but since your sdh switches can only talk ISIS shouldn't
someone within your company be able to tell you this.
Seriously though look up the links below. & BUY Jeff Doyles Routing TCP/IP
book although there are some flaws in it, it is the best there is out there
at the moment.
exactly what it says. NO LOGGING CONSOLE, i.e. when you are consoled in to
the box you wont see any messages on your screen.
-Original Message-
From: beth shriver [mailto:[EMAIL PROTECTED]]
Sent: 24 April 2001 15:39
To: [EMAIL PROTECTED]
Subject: what does " no logging console" mean? [7:
No,
You have to sit the lab within one year and every other year after until you
pass or you have to sit your written again.
-Original Message-
From: Lupi, Guy [mailto:[EMAIL PROTECTED]]
Sent: 30 April 2001 15:26
To: [EMAIL PROTECTED]
Subject: RE: Status for CCIE if passed only written [
Hi,
Does anyone know how to configure a menu such that by pressing key 1 it will
do various commands i.e.
menu robert text 1 Press key 1 to shut ehternet interface down
menu robert command 1 conf t
then when you put in more menu robert command 1 they just overwrite each
other.
What I need to
Very similar to Robert Nelsons comments. I have just designed and
implemented an International "out of band" management network using IS-IS.
This as Robert has already said is to use firstly and primarily manage the
SDH equipment we have.
I find it quite straight forward although I seem to be ha
Just a quick question but is the IOS version you are using compatible with
this card?
-Original Message-
From: Adam Wang [mailto:[EMAIL PROTECTED]]
Sent: 18 May 2001 15:37
To: [EMAIL PROTECTED]
Subject: trouble configure channle-group on WIC T1 card [7:4983]
Hi group,
I have a 2621 rou
Check out the cisco website. I am afraid I don't have the link but it is
headed ISIS Multi Area Protocol Support. This is an excellent document.
Check the archives as someone not that long ago asked the same question and
at that time I did have the link to that document.
HTH
-Original Mess
1 - 100 of 222 matches
Mail list logo
