Io ho una epson stylus 480 che non compare fra i modelli di stampante
supportati nell' elenco di configurazione,vi sono la 460 e la 500 come
modelli pi simili.Una volta scielto uno di questi modelli, in hardDrake
compare il modello di stampante ma nulla da fare per fare funzionare la
mia
io come ho scritto ho un colorado usb 9600 della primax di cui in
windows non posso lamentarmi,ma visto che anch'io perferisco linux
vorrei che qualcuno mi dicesse come poterlo provare anche qua...ciao
[EMAIL PROTECTED] wrote:
Salve a tutti,
visti i problemi di compatibilit tra Linux, che
On Sat, 17 Mar 2001 14:23:33 +0100
[EMAIL PROTECTED] wrote:
Salve a tutti,
visti i problemi di compatibilit tra Linux, che comunque preferisco
a Windows, e le periferiche in genere, prima di comprare uno scanner volevo sapere
se c' gi qualcuno che ne ha acquistato uno di recente e lo
On Sat, 17 Mar 2001 02:22:19 +0100
"Alessandro \"Sgama\" Amadori" [EMAIL PROTECTED] wrote:
Eccomi di nuovo qui, reduce da alcuni esperimenti.
Il pacchetto awesfx e' installato, ma al posto di /usr/bin/sfxload ho
/bin/sfxload e della direcotry /usr/share/sfbank neanche l'ombra,
tantomento
- --
It said uses Windows 98 or better so I installed SuSE 7.1
Proud user of SuSE 7.1 Professional
Register Linux User 168814 ICQ #49993234
GPG Public Key available at http://www.keyserver.net
Key fingerprint = 6426 1CFF 0987 9D51 76D6 06BC F22A CFF4 559A 03E7
-BEGIN PGP
I use Samba to provide file and print services for
Windows 98 and 2000 clients; after installing Linux I get Samba running and drop
in a standard etc/smb.conf file. After setting some smb passwords it
always works fine. I'll send the file on request (to avoid burdening the
list).
-- GT
Philomena escribi:
Hi,
GRUB doesn't use lilo.conf, it uses a file called menu.lst in the
/boot/grub directory. You just need to edit that file, set your timeout .
You may need to run install.sh to install grub onto your MBR, if it isn't
there now.
It wasn't. I've also had to exec "chmod
- Original Message -
From: "Salvatore Eric Indiogine" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, March 16, 2001 4:34 PM
Subject: [newbie] KDE 2.1 install
Greetings!
I am downloading the Mandrake 7.2 KDE 2.1 rpms from
Yeah, Chuck it does. Log in as root, open a terminal, and type the following
exactly (Without the quotes).
"ipchains -P forward DENY"
That oughtta do! Remember, each time you start your PC, you'll have to do
it, until someone sends you the instructions on how to automate it. Since I
usually run
Mark; Thank-you for not
overstating the obvious! However, as I had mentionedin my initial post, it
was my opinion, not the opinion of all users ofPMFirewall. That having been
repeated now, I'd like to point out thatipchains takes only 3 lines of text
( at least for the networks that
Hello
I have been using Linux (Madrake 7.2) for about a week now. I had no
problems with the configuration of my first ethernet card, which I use
to connect to the internet. It was recognized and configured during
installation.
However, my second ethernet card, which I use to share files and
On Fri, 16 Mar 2001, Ralph De Witt wrote:
Bruce:
In the future please do not post in html. A large majority of Linux users do
not have the capability to read html formated messages, and most consider
html formated messages as rude, and just ignore them. So turn of html
formating for your
I start mine with:
/usr/local/bin/vncserver -geometry 1152x864
and here's my xstartup:
[root@elmo .vnc]# cat /root/.vnc/xstartup
#!/bin/sh
#xrdb $HOME/.Xresources
#xsetroot -solid grey
#xterm -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop"
#kwm
/usr/bin/startkde
HTH,
Bill
Dan LaBine wrote:
Yeah, Chuck it does. Log in as root, open a terminal, and type the following
exactly (Without the quotes).
"ipchains -P forward DENY"
That oughtta do! Remember, each time you start your PC, you'll have to do
it, until someone sends you the instructions on how to
Additonal Note. If you are adding Windows 2000 to the mix, it must reside below 2
gigs of the first hard drive.
On Fri, 16 March 2001, Romanator wrote:
michael wrote:
I was quadribooting for awhile (NT,98SE,RH,MDK7.2).
Make sure windows is on first.
-m-
Jon Doe wrote:
Mark;
Thank-you for not overstating the obvious! However, as I had mentioned
in my initial post, it was my opinion, not the opinion of all users of
PMFirewall. That having been repeated now, I'd like to point out that
ipchains takes only 3 lines of text ( at least for the networks that I
Dan...In some ways we're saying similar things, except as to the point
of "what" Pmfirewall is. And it is definately "not" a firewall, rather
it is merely a means to get the ipchains firewall rule-set configured to
a point to where it's functional. Notice I didn't say ready for prime
time, but
Hi!
Thanks to all of you who has answered my message! Now my SB32 works
fine using sndconfig. I've had to download it either ;-)
--
Joan Tur. Ibiza - Spain
[EMAIL PROTECTED] [EMAIL PROTECTED] ICQ 11407395
Joan.Tur.pagina.de www.ClubIbosim.org
Linux: usuari registrat
Thanks GT. In my own experience im start with the
red hat 6.2, and after 1 week with mandrake 7.1 (helium), and in this distro
works very well, I get share my printers and dirs, and only changed few lines.
but in this distro (7.2 odissey) i can't. I try and try and doesn't work. I chek
the
I can't remember were heard this, but i know that the cable modems ara based
on windows technology. But dont worry, in the Unix Guru Universe --
http://www.ugu.com you can find a lot of help.
Just try it... - ed@r
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent:
Hi,
After 4 months without linux, a "simple" fix in the BIOS allowed me to
install linux again.. happy happy joy joy!
problem:
the system recognizes my soundcard but there is no sound
i'd like to change the irq setting but the hardrake config wizard
doesn't give me this option ? is there some
Getting back to PMfirewall leaving some ports open: I've got a
complete mental block when it comes to comprehending the ipchains rules.
I'm at even more of a total loss with the new iptables in 2.4.x kernels.
I have found that I can completely secure my box, all ports, using a
Tom,
That's how I've got my system running and I've found the combination to
a very good one. As for wrapping your brain around the IPchains rules
and such. I can appreciate how you're feeling having been there myself.
It took a little while of looking at the man pages and then reading and
I just got pmfirewall working in my unusual circumstances.. ie hosting
multiple domains,, (virtual IP's for ppp0)
and before the firewall would only work on the static IP of the dialup, not
the actual domain names..
it now works exactly as I wanted, and I have added alot to the ruleset as
Moose,
I am using tcp/ip. I'm in the process of setting up a proxy
server, so I needed something routable...
Shouldn't be any problem with -- at least -- getting from the
Windows box to the Linux box. You'll need other tools -- smb,
Reflection, etc to get from the Linux to Windows.
Hello,
Long story short...tried to dualboot LM 7.2 with NT4. Really messed
up! Now all I get is "grub" with a command prompt after it. Tried fdisk and
format to no avail. Just want to install LM 7.2 on clean hdd. Can any one
please give me some info? VERY new to Linux.
Did you do a "fdisk /mbr" to clean to boot sector?
On Sat, 17 Mar 2001, you wrote:
Hello,
Long story short...tried to dualboot LM 7.2 with NT4. Really messed
up! Now all I get is "grub" with a command prompt after it. Tried fdisk and
format to no avail. Just want to install LM 7.2
Yes I tried that But I get "Error: Unrecognized command"
From: Jean-Louis [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [newbie] grub
Date: Sat, 17 Mar 2001 09:46:25 -0500
Did you do a "fdisk /mbr" to clean to boot sector?
On Sat, 17 Mar 2001, you wrote:
Dear Eduardo, I would appreciate it if you sent your Samba file to me. I
am setting up Samba so that I can network between my LinuxMandrake 7.2
and vmware-Win95. I do not know anything about it at all but I will
learn. Thank you. Sincercely, Marcia
Mark, Tom, and anyone else who can shed a little light on the subject;
Mark, Thanks for your response. And your support. I was about to "Light one
Up" when I received your email. I owe you one. And now for a question that's
probably going to open a "Can Of Worms". I will start by apologising up
I had a similar problem which was fixed by disabling the Plug Play
Operating System feature in my bios. The network card and cable modem
worked fine after that.
Steve Watt
One of the messages I get as Linux loads is as follows:
"Determining IP information for eth0 via dhcpcd ... failed"
I've never run NT but in 95 /98/Me you make a startup disk when you do
the initial load. FDISK is on my startup disk and it can be run from
there. Also, you may have a boot disk that came with NT.
CR
For some reason the instructions that I have been following did not get
sent with my question about ethernet card installation. I'm trying
again, and if it doesn't work this time, they are located at
http://www.linksys.com/support/kb.asp?kbid=116.
Steve Watt
Steven Watt wrote:
Hello
I
CR,
I have an NT boot disk that I made. I will try that. Thanks for
the help.
From: Charley Peggy Robinson [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [newbie] grub
Date: Sat, 17 Mar 2001 12:10:41 -0800
I've never run NT but in 95 /98/Me
Just re-installed 7.2 in expert mode. I had tried to use lilo and it wouldn't time
out, but that's another story.
During the install, I set up a modem connection, entering the 2 DNS addresses for my
server - earthlink.net, leaving the Domain name blank.
Launching Kppp via the 'internet' icon
I've just installed MD7.2 and I was hoping to get my scanner working
with it. Although Sane is definitely installed, it does not seem to be
able to recognise my scanner - a parallel port Plustek OpticPro 9630P.
The scanimage command tells me that "No sane devices detected".
The documentation on
run sndconfig. if soundblaser compatible, these are the settings:
Soundblaster 16
I/O port 0x220
IRQ 5
DMA 1:1
DMA 2:5
MPU I/O 0x330
be sure to exit root when done, i.e. dont run startx from root.
jk
How do I upgrade the kernel on a floppy for GRUB?
Thanks in advance.
~Lance
thanks for the tip, but it doesnt work for me:
I have a soundblaster live - sndconfig finds it, but the soundtest or
modprobe? shows an error:
.../emu10k1.0: init_module:
Device o resource busy
.../emu10k1.0: insmod
.../emu10k1.0 failed
.../emu10k1.0: insmod
sound-slot-0 failed
fyi: the card is
On Friday 09 March 2001 07:44, you wrote:
tail -f /var/log/syslog | grep "foobar" foobar.txt | mailfile foobar.txt
[EMAIL PROTECTED]
Well, the first reason this won't work as written is because of your use of
'tail -f' rather than plain 'tail'. 'tail -f' is basically 'tail forever',
and
On Sat, 17 Mar 2001 14:39:25 -0330, you wrote:
I had a similar problem which was fixed by disabling the Plug Play
Operating System feature in my bios. The network card and cable modem
worked fine after that.
Steve Watt
One of the messages I get as Linux loads is as follows:
Found it.thanks for the tips!
You might want to check out Object Central - you can download the whole
VIDE (Visual IDE doe C++ and Java) help system including FAQs.
http://www.objectcentral.com
--
Len Lawrence @ The Thistle Foundation
Does anyone know if there are any alternative drivers I could use for
the Mach64GX? 256 colors suck. I have tried many others, so far
nothing is working.
Thanks,
James
-- James carlson, [EMAIL PROTECTED] on 03/17/2001
Ok, so what are some good ways to convert PMFirewall rules to IPChains?
I'm running IPChains now, witht the rules set up by PMFirewall (added
a rule to close port 1024 which PMFirewall left open). But how do I
make it close (as opposed to filter) ports. ALso, any specific
unnecessary
Doubtful about the winderz tech thing. The instructions I got from Cox
about my lack of DHCP configuration in the face of an upcoming address
reassignment included instructions for Mac OS 8.5. I have gotten DHCPCD
to work sporadically with Linux, and imagine my troubles probably stem
more from
Hi Guys.
I have just re-installed Mandrake Linux 7.2 on my laptop.
I re-partitioned as follows:
hda1 - 144Mb - Suspend.
hda2 - 6.19Gb - Linux Extended; contains:
hda5 - 15Mb - /boot
hda6 - 128Mb - Swap
hda7 - 6.05Gb - /
Obviously, having re-installed from my original CDs, there were a
On Saturday 17 March 2001 05:49 pm, Paul R wrote:
Ok, so what are some good ways to convert PMFirewall rules to IPChains?
PMfirewall is nothing more than a script you run, answer some
straightforward questions, and then it writes ipchains rules according to
the answers you give. .or
use your Windows boot disk to start your computer and at the A:\ prompt
issue the command to clean your boot sector - "fdisk /mbr" that will
take care of it.
Mark
robert macdonald wrote:
Yes I tried that But I get "Error: Unrecognized command"
From: Jean-Louis [EMAIL PROTECTED]
--- Dan LaBine [EMAIL PROTECTED] wrote:
snip!
Why are many Linux-based programs so complicated to
set up?? Here we are,
snip!
I'm no expert but I've got a few theories for you.
Theory 1:
Hacking code is fun. Writing a polished interface
isn't so much fun. Since most of what you use under
You should probably rebuild your RPM database with this command:
rpm --rebuilddb
M.
On Saturday 17 March 2001 17:25, Ozz wrote:
Hi Guys.
I have just re-installed Mandrake Linux 7.2 on my laptop.
I re-partitioned as follows:
hda1 - 144Mb - Suspend.
hda2 - 6.19Gb - Linux
Dear friends:
We all know about KDE and Gnome. Some have even heard of Window Maker,
Sawfish, Enlightenment, Icewm and Blackbox, all of which are listed on
Mandrake's graphical login menu and all of which are installed by
default.
Realizing that the days of my AMD k6-2 400 mhrtz with 128 megs
I am have problem installing LM 7.2 on my Laptop.
System Info:
Sony Vaio PCG-F160
300 MHz P2
64 MB Ram
4 GB Fujitsu HD
During installation it will do one of the following three things:
1) Hangs-up* on installing gpm
2) Hangs-up* on installing grep
3) Prompts user with: error installing
You know, I had similar problems when I installed Mandrake 7.2 on my machine.
I had 7.1 on there operating fine. I decided to format my drive, and add
7.2 fresh, because I wanted the custom install, and because I had not
customized 7.1 because it didn't recognize my modem. Anyway, to get to
Hi again,
As many of you have read in recent weeks, I've been unable
to install 7.2 on my desktop machine, apparently because of
problems with the hard drive's partition table or something.
Today while in Winsucks, I ran some Norton AntiVirus and it
said I have one "master boot record", and two
Beta 2, at this point, has it's advantages over beta 1. Me being able
to use cdrecord isn't one of them, unfortunately, but more on that
later.
If I had to pick a word, beautiful would be it - man, is this a pretty
GUI. And I use Blackbox! Blackbox or no, visual excitement runs amuk.
If I had
On Sunday 18 March 2001 12:16 am, you wrote:
You know, I had similar problems when I installed Mandrake 7.2 on my
machine. I had 7.1 on there operating fine. I decided to format my drive,
and add 7.2 fresh, because I wanted the custom install, and because I had
not customized 7.1 because it
get 2 fresh cds, i had the same problem, fresh cds fixed this
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Jon Doe
Sent: Sunday, March 18, 2001 5:22 PM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Installing LM 7.2 on a Sony Vaio Laptop
On Sunday 18
Hi all,
I'm trying to get my ESS ES1980 Maestro3 soundcard working with LM 7.1 (Kernel
2.2.15). I've established that I need to install ALSA sound drivers, and
according to the web site, version 0.5.10b supports the maestro3 card. My
problem is I've downloaded the package, compiled it up but
58 matches
Mail list logo
