Perchè non riesco afar riconoscere a Xwindow il monitor LCD TFT del mio
Notebook Thinkpad?Vi prego aiutatemi.
Francesco Sarli
_
Scarica GRATUITAMENTE MSN Explorer all'indirizzo
http://explorer.msn.it/intl.asp
Ho un problema che mi affligge dalla 7.2!
Il kernel non riconosce perfettamente la mia scheda madre AOPEN AX34 con il Chip VIA
VT82C686B.
L'Hardware monitor di Mandrake mi visualizza con il punto interrogativo i 3 Bridge tra
cui quello dell'agp e il CHIP VT82C686. E' per questo motivo che Xfree
Quoting liberally from Ethernet Networks by Gilbert Held:
The IEEE 8023 standard for 10BASE-T using unshielded twisted pair at 10 Mbps,
maximum segment length is 100 meters or 328 feet...
Now if you want to get really technical, the 100 meters was originally
meant to consist of 3 segments.
No trouble at all with CAT5 at that distance.
If you do not want to drill holes wireless is good. (but cables are cheaper)
I use wireless at 11Mbps from Melco/Buffalo I have a PCMCIA adapter with a
Melco wireless card in the desktop PC upstairs and a wireless hub colocated
with my cable modem.
anybody know of any good, easy to understand home networking
documentation? Specifically for connecting two Linux computers through
a hub or router?
-Paul Rodríguez
_
Do You Yahoo!?
Get your free @yahoo.com address at
Hello,
This is a problem I haven't been able to solve.
Hi. I'm very new to Linux so I bought the 3 CD pack for Mandrake 8.1
expecting the installation to be pretty much trouble free. Unfortuantely,
after the initial setup/ welcome screen using the boot disk and bootable
CD-ROM, the setup said
Heh, I've run many single drops of over 200 meters on Cat-5e using
100BaseT w/o problems to connect buildings together.
Everything is in the shielding.
-JMS
|-Original Message-
|From: [EMAIL PROTECTED]
|[mailto:[EMAIL PROTECTED]] On Behalf Of Ed Kasky
|Sent: Saturday, November 10,
On Sat, 2001-11-10 at 17:56, Paul Rodríguez wrote:
anybody know of any good, easy to understand home networking
documentation? Specifically for connecting two Linux computers through
a hub or router?
The networking HOWTO?
Dave
--
An expert is one who knows more and more about less and less
There's a limit of 100 meters (over 300 feet). So, 40 feet is no problem.
At 05:37 PM 11/10/2001 -0500, you wrote:
Hi, everybody. I have a DSL connection coming in to the upstairs
computer. I'd like to connect (withought having to get a new modem) a
computer downstairs to the same connection.
Yulliansyah wrote:
I want to install Mandrake 8 to my 2ND Harddisk and here's the problem :
data :
I have 2 HARDDISK with partition like this :
HD 1 : 20 GB (Windows 98)
C: FAT32 - 8 Gb - Primary - Active
*. Ext
E: FAT32 - 6Gb - Logical
F: FAT32 - 6Gb - Logical
HD 2 : 4.2
first, thanks to all of those who kindly answered my question abt linux
working on athlon-based systems. :)
second, has anyone gotten their linux system (on a laptop) to work in a
wireless networked environment, particularly using linksys' wireless router
+ wireless pcmcia card?
thanks.
On Fri, 9 Nov 2001 19:52:30 -0800, shane wrote:
ld.so-1.9.5-13.i386.rpm and libc-5.3.12-35mdk.i586.rpm were both needed to
install wp 8 under 8.0.
Yep, they did the trick.
--
Jim Marshall
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
\
Paul, you might want to pick up this months Linux Journal (you can get it
at most Barnes Nobles). The cover article is on building the ultimate
Linux box - it will probably help a good bit.
peace,
Rog
Roger
Could you send me publisher/subscription details of Linux Journal.
I
On Sun, 11 Nov 2001 14:27:46 +1300
Michael [EMAIL PROTECTED] wrote:
| Yulliansyah wrote:
| When run windows Explorer it become very slow. Drive G: in theorycal should be
|invisible but it Visible and have an icon like a CDROM icon.
It sounds really odd for Windows to even notice your Linux
Anyway, I would like to ask your opinion to what Socket A Motherboard
for AMD Athlon 1.x Ghz would you like to recommend to me?
I recommnend Asus K7V - mine's a K7V133 - zero problems since I put it
in back in March. I haven't been successful at lm-sensors but I haven't
had any heat problems
Stephen,
I am a newbie, but from what I know it is perfectly possible that you cannot
receive your mail but at the same time you can send.
The problem is that each task is performed by different protocols. You need
a SMTP server for sending mails and ussually a POP server for recieving.
And, as
On Sat, 2001-11-10 at 20:56, tek1 wrote:
i installed staroffice6beta in /usr/bin/staroffice6beta/ when logged in as root.
when i log in using my (non-root) normal user account to try to run
staroffice, i get the following message:
the program cannot be started. the configuration file
On Thu, 8 Nov 2001 18:17:01 -0800, Gregory Margo [EMAIL PROTECTED] wrote:
On Wed, Oct 31, 2001 at 04:45:41AM +1100, Sridhar Dhanapalan wrote:
On Tue, 30 Oct 2001 09:12:40 -0800, Gregory Margo [EMAIL PROTECTED]
wrote: I use the Gnome desktop w/sawfish under LM 8.1. For the first few
days I
hi Michael,
my windows normal now let me share my experience :
first condition that cause windows slow was :
HD 1 : plug in to PRIMARY MASTER
CDROM : PRIMARY SLAVE
none : SECONDARY MASTER
HD 2 : SECONDARY SLAVE
second condition --- Normal now :
HD 1 : PRIMARY MASTER
HD 2 : PRIMARY SLAVE
i installed staroffice6beta in /usr/bin/staroffice6beta/ when logged in as root.
when i log in using my (non-root) normal user account to try to run
staroffice, i get the following message:
the program cannot be started. the configuration file '.sversionrc' does
not support the current
thx dave.
i'll try the installation with the /net switch. thx again. :)
At 21:27 01/11/10 -0600, you wrote:
On Sat, 2001-11-10 at 20:56, tek1 wrote:
i installed staroffice6beta in /usr/bin/staroffice6beta/ when logged in
as root.
when i log in using my (non-root) normal user account
On Saturday 10 November 2001 19:55, you wrote:
\
Paul, you might want to pick up this months Linux Journal (you can get it
at most Barnes Nobles). The cover article is on building the ultimate
Linux box - it will probably help a good bit.
peace,
Rog
Roger
Could you send me
I run an AMD 850MHz box that I built myself. I used a FIC motherboard
and 512 MB ram. Used my old modem an action tec PCI and it had built in
audio. I still dual boot (trying to remedy that) and everything works
better and faster in Mandrake than in winblows. The video is better,
speed is
Hi! When I upgraded from Mandrake 7.2 to 8.1 I kept my /home tree intact
and reformatted all the other partitions for a complete re-install. One
of my most important goals was to keep the mail folders that I had
established to hold on to important old mail. In several of my accounts
everything
On Sun, 11 Nov 2001, Michael wrote:
\
Paul, you might want to pick up this months Linux Journal (you can get it
at most Barnes Nobles). The cover article is on building the ultimate
Linux box - it will probably help a good bit.
peace,
Rog
Roger
Could you send me
I have WP 8.0 (commercial CD) on Mandrake 8.1. I have gotten
past the problem requiring libc5 and ld.so2.0, and I have been
able to get xwp running with the small number of fonts installed
by default. However, I am having a serious problem trying to
install additional adobe type 1 fonts. In
david, thx again for your suggestion. :)
i installed staroffice (under root) with the /net switch. when i logged
out of root and logged back in under a normal user and tried running s.o.
from the home directory, the same message (as before) was displayed.
however, this time when i
Athlon works just great with Mandrake as does K6. You do not have to do
anything.
Any applications you compile on your Athlon will by default get compiled as
i686 architecture and will include extensions to the instruction set like
3dNow This is why for example the developers of mplayer
I want to install Mandrake 8 to my 2ND Harddisk and here's the problem :
data :
I have 2 HARDDISK with partition like this :
HD 1 : 20 GB (Windows 98)
C: FAT32 - 8 Gb - Primary - Active
*. Ext
E: FAT32 - 6Gb - Logical
F: FAT32 - 6Gb - Logical
HD 2 : 4.2 GB (plan for Linux Mandrake 8.0
While you may have experienced this, it's NOT symptomatic of Athlon
systems, or even 750's.
It's more likely you were running into another problem preventing the
first stage kernel load... I.E. it wasn't finding the partition table,
etc. At Init you didn't even have a running kernel.
-JMS
I upgraded my mb and cpu from a celery 450 to a athlon 1.4 gig and it worked
flawlessly, just make sure that your hard disks are in the same positions
they were before, ie if it was a primary master before, it must be a primary
master after the upgrade.
rgds
frank
-Original Message-
Just to make sure there is no way Samba could be advertising your shares over
the internet you should use the 'hosts deny' facility of Samba (Globals page
in SWAT) to exclude the IP address of your internet gateway.
If you have more than one network interface (like for example a dial up
On Sat, 10 Nov 2001 16:31, Dennis Myers wrote:
| On Friday 09 November 2001 16:11, you wrote:
|
| Other relevant bits are: Soltek SL-KAV75 mobo and Athlon TBird
| 1.0GHz CPU.
|
| If this is the same board as listed on the soltek site as a SL-75KAV
| then as you look at the attached URL you
Hi everyone,
Is there a way to make procmail do certain rule-checks on certain times?
I set it up to forward specific things to my work mail address, but it does
not need to do that in the weekend.
Wat I can think of is 2 INCLUDERC files and a cronjob that sets up one or the
other. One empty
On Sat, 10 Nov 2001 17:44, Tom Brinkman wrote:
| On Friday 09 November 2001 06:34 pm, skinky wrote:
| On Sat, 10 Nov 2001 11:09, Tom Brinkman wrote:
|
| Regular' kernels will only address 'bout
|
| | 900+ mb of ram. So if you want to use all that ram, you'll need
| | to install a
Still on the general topic of StarOffice. I am using the 6.0 beta and I
seem to have messed up the database integration some how, or perhaps I'm
just not sure what I should look for if it is working properly. I went
through the StarOffice installation prior to doing the Adabas
installation. The
Dear All,
After re-installing the system several times, I finally figure out tht the
problem is due to the LILo. After I remover the MBR under DOS and reset the
partition type by Linux fdisk, I can get back the partition under Windows
again. I think the problem is specific to the LILo version
So far the would like to see more top posting folks have the lead:
OK-//
No Way-//
Either Way-//
Against changing the topic of a thread w/o changing subject line-//
Please snip replies-///
The third vote on pls snip is from me. It's a good idea, so could you
please snip unnecessary pieces
Can someone familiar with GRUB please tell me how to alter the MENU.LST
file to make windows the default OS? I cannot use linux for internet
access, so until then, I'd like to make windows the dedfault OS. Here is
the file as I know it:
timeout 30
color black/cyan yellow/cyan
i18n
windows would have worked if you would have gone into the device mangler,
err... manager and deleted the info about the old MB and stuff, and let
winders discover the new hardware. I have a computer that I have upgraded
since it was a 286/10 with 2.5 megs mem. and a 30 meg hd. copies the files
to
Can't you just do it from the Mandrake Control Center?
Dan Jacobs wrote:
Can someone familiar with GRUB please tell me how to alter the MENU.LST
file to make windows the default OS? I cannot use linux for internet
access, so until then, I'd like to make windows the dedfault OS. Here is
Dear friends:
My SoundBlaster Awe64 card is apparently dead or dying. I happen to have a
Pine Crystal Chipset PCI Sound Card (CS4281, 3D Spatialization, AC '97
Codec). It came with my new IBM 667 NetVista computer. Is this supported by
LM 8.0?
Please remember that I am still using LM 8.0.
Sorry for this OT.
Anyway, I would like to ask your opinion to what Socket A Motherboard for AMD Athlon
1.x Ghz would you like to recommend to me? I am planning to build my all-in-one
server for my small Internet cafe. Also, what UPS is good for this kind of server
would you like to
On Saturday 10 November 2001 12:57 am, Epicurus wrote:
On Friday 09 November 2001 04:55, you wrote:
just wondering how well mandrake/linux works on athlon-based
systems? are there any issues which i need to be careful about?
thanks.
I've got Mandrake 8.0 runing on an Athlon-750 and
I'm running v8.1 (d/l version). I have a 52x CD-ROM as /mnt/cdrom and a
Plextor CDRW as /mnt/cdrom2 (/dev/scd0).
As my normal user, I can open a shell and type in df /mnt/cdrom2 and it
gives the normal results.
As -root-, I can do the same thing, and it never gives a result. Also, the
usual
Neil
I don't have the BTOpenworld service (NTL Cable is a breeze), so I cannot
help directly, but just in case you do not get any first hand help from this
list you might have luck with the linux-usb pages at
http://www.qbik.ch/usb/devices/
Do a search on Alcatel and you will get a list of
In the readme that comes with Grub, it explains how to change the default os -
Yours is set to 0 right now. To make windoze the default, change the line
from:
default 0 - default 2
Ed
At 04:07 AM Saturday, 11/10/2001, you wrote -=
Can someone familiar with GRUB please tell me how to alter
On Sat, 10 Nov 2001, Mandrake Newbie wrote:
This is a multi-part message in MIME format...
=_1005399492-1851-1381
Content-Type: text/plain
Sorry for this OT.
Anyway, I would like to ask your opinion to what Socket A Motherboard for AMD Athlon
1.x Ghz would you like to
Okay, this seems like the place for someone with relatively little Linux
experience to go with base maddening problems. I've worked with computers for
years but finally made the plunge to Linux a month or so ago. The monitor I'm
using is ancient, but worked fine at 800x600, 16M colors on both
this is what I have LM 8.1 d/l version, MS optical wheel mouse. tryin to
install imwheel 9.9.1mdk I assume that is the one from the install CD. it
says sorry can not procees request all packages returned errors Is there a
way to see those errors? any sugjestions on how to fix this?
Want to
just wondering how well mandrake/linux works on athlon-based systems? are
there any issues which i need to be careful about?
thanks.
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
I sincerely hope so!
I have mandrake 8.0 running on 6
just wondering how well mandrake/linux works on athlon-based systems? are
there any issues which i need to be careful about?
thanks.
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
I sincerely hope so!
I have mandrake 8.0 running on 6
In reply to David Reynolds's words, written Sat, 10 Nov 2001 12:12:54 -0600
I cannot get more than 640x480 screen dimensions, and the computer thinks
this is the _only_ setting available for a Nvidia Geforce2 MX-200 3d
accelerator card (except it's listed as Geforce2 DDR (Generic) - this
Hi
I supposse that you're using a pop3 server and another smtp server in wich
you don't need the password or the password is fine... check very well the
configuration of you Kmail 'cause It with me works very well
bye
El Vie 09 Nov 2001 12:01, escribió:
Hi All People,
I encounter another
1.How will you eliminate duplicate rows from file 'a' and store the
same in file 'b'?
First - it's best to use a subject line that's descriptive. Saying help
required doesn't really help much. Better to say something like 'help
with filtering' or something.
There is a Unix tool called
I have a directory on a windows partition that currently contains
thousands of very small files that I need to routinely access. Will
My guess is that migrating them to a reiserfs partition would improve both
access time and space utilization. VFAT is still a big space waster with
small files
In reply to David Reynolds's words, written Sat, 10 Nov 2001 13:29:42 -0600
You should drop to a command level, leaving X. Then run Xconfigurator:
[root@tbird paul]# which Xconfigurator
/usr/X11R6/bin/Xconfigurator
There is a text interface when run outside of X, and that should get you
On Saturday 10 November 2001 12:40, you wrote:
Hi
I supposse that you're using a pop3 server and another smtp server in
wich you don't need the password or the password is fine... check very well
the configuration of you Kmail 'cause It with me works very well
bye
El Vie 09 Nov 2001
So have I with LM 7.2 and 8.0 and although there is still a big question with
the VIA chipset everything works as it should. I have no problems at all.
On Friday 09 November 2001 08:54 pm, you wrote:
El Vie 09 Nov 2001 04:55, escribiste:
just wondering how well mandrake/linux works on
I am building a system for the doctor's private practice. Stabillity is
the number one concern. We will have windows and linux running on
separate hard drives untill we can tansition the database to Linux,
after which, I'd like to have a RAID system for increased data
reliabillity.
Do you
On 10 Nov 2001, Paul [ISO-8859-1] Rodríguez wrote:
I am building a system for the doctor's private practice. Stabillity is
the number one concern. We will have windows and linux running on
separate hard drives untill we can tansition the database to Linux,
after which, I'd like to have a
On Sunday 11 November 2001 12:39 am, you sent me this message:
Sorry for this OT.
Anyway, I would like to ask your opinion to what Socket A Motherboard for
AMD Athlon 1.x Ghz would you like to recommend to me?
I built my system using the AMD 1Ghz processor in a AOpen AK73 series MB
(1394
Hi, everybody. I have a DSL connection coming in to the upstairs
computer. I'd like to connect (withought having to get a new modem) a
computer downstairs to the same connection. Can I send a cat5 cable
down throught the wall from the router to the downstairs computer?
(approx. 30-40 feet) Is
Hi...
How do I make a DivX from my DVDs?? and What Software i need for that
thanks
--
Usuario Registrado
de Linux #232544
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Sat, 2001-11-10 at 16:37, Paul Rodríguez wrote:
Hi, everybody. I have a DSL connection coming in to the upstairs
computer. I'd like to connect (withought having to get a new modem) a
computer downstairs to the same connection. Can I send a cat5 cable
down throught the wall from the
65 matches
Mail list logo
