On Thursday 06 March 2003 07:55 am, Diane Arsenault wrote:
Hello everyone,
I am totally new to Linux. Just bought a new computer, and want to install
both Windows 95 and Mandrake 9.0 on it. Here's what I've done so far:
(Computer = HP 7915, Intel Celeron 1.1 Ghz, 256 Mb SDram, 40 GB HDD)
: Thursday, March 06, 2003 1:15 PM
Subject: Re: [newbie] COMPLETE Newbie - need help installing Mandrake 9.0
I am totally new to Linux. Just bought a new computer, and want to
install
both Windows 95 and Mandrake 9.0 on it. Here's what I've done so far:
(Computer = HP 7915, Intel Celeron
- Original Message -
From: civileme [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, March 06, 2003 4:19 PM
Subject: Re: [newbie] COMPLETE Newbie - need help installing Mandrake 9.0
Ummm, first of all, please set your mailer to plain text messages. I had
to
retrieve yours from
On Fri, 2003-03-07 at 07:34, civileme wrote:
Diane, I think you have an older computer with a CD that expects 650Mb CD
media. Mandrake 9.0 is distributed on 700Mb (80 minute audio) CD media, and
older drives often have difficulty booting from though not normally reading,
the later media.
- they are set as per my
last post with system specs.
My internet connection is dial-up, and not very fast at all.
Diane
- Original Message -
From: civileme [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, March 06, 2003 4:34 PM
Subject: Re: [newbie] COMPLETE Newbie - need help
On Fri, 2003-03-07 at 07:51, Diane Arsenault wrote:
Hello Civileme,
Oops - sorry about the HTML - I didn't realize it wasn't set to plain text.
OK - info about my computer. It's a HP Pavilion 7915, and I purchased it
from a company that sells factory overstocks from HP. It came hardware
On Thu, Mar 06, 2003 at 10:09:22AM -0800, Myers, Dennis R NWO wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Diane Arsenault
Sent: Thursday, March 06, 2003 11:57 AM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] COMPLETE Newbie - need help
Diane Arsenault wrote:
Hello Civileme,
Oops - sorry about the HTML - I didn't realize it wasn't set to plain text.
- 128 Mb SDRAM PC 100, 2 DIMM sockets. I had 128 Mb added, for a total of
256. (NOTE - when the BIOS fires up it report 255 Mb's, not 256)
- 40 Gb 5400 RPM Hard Drive
- 48x
On Thursday March 6 2003 12:09 pm, Myers, Dennis R NWO wrote:
Hi Simon - My HDD is Primary master, I have a Cd-ROM drive set as
Secondary master, and a CD-RW set as Secondary Slave. Both CD's
are on Auto.
Diane
Di, are you sure the drive jumpers are set as such. Many Windoze
computers
] COMPLETE Newbie - need help installing Mandrake 9.0
On Thu, 2003-03-06 at 13:19, Diane Arsenault wrote:
Thanks to both Lanman and Adolfo for their replies.
Unfortunately, I have already placed my Cd-ROM drive at the top of the
boot
priority list, but some reason I can't boot from
: [newbie] COMPLETE Newbie - need help installing Mandrake 9.0
On Thursday March 6 2003 12:09 pm, Myers, Dennis R NWO wrote:
Hi Simon - My HDD is Primary master, I have a Cd-ROM drive set as
Secondary master, and a CD-RW set as Secondary Slave. Both CD's
are on Auto.
Diane
Di, are you
On Thu, 2003-03-06 at 19:37, Diane Arsenault wrote:
Hi Tom,
No, I haven' ttried these CD's on anohter system - Good thought. I'll be
sure to try that before I pack this thing up and send 'er back!
Bravo
--
__
/ \\ @ __ __@ Adolfo
Hello all,
I need some help. I am new to Mandrake but not new to Linux. Anyway, I found a
website that talked about adding package sources and I have added several
(http://vsbabu.org/mt/archives/2002/12/03/mandrake_9_getting_more_software.html).
Using the information provided, I have tryied
On Sun, 2003-01-26 at 22:11, [EMAIL PROTECTED] wrote:
Hello all,
I need some help. I am new to Mandrake but not new to Linux. Anyway, I found a
website that talked about adding package sources and I have added several
From: Adolfo Bello [EMAIL PROTECTED]
Date: 2003/01/26 Sun PM 09:45:57 EST
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Need help installing gnucash
On Sun, 2003-01-26 at 22:11, [EMAIL PROTECTED] wrote:
Hello all,
I need some help. I am new to Mandrake but not new to Linux. Anyway
On Sunday 26 January 2003 06:02 pm, [EMAIL PROTECTED] wrote:
From: Adolfo Bello [EMAIL PROTECTED]
Date: 2003/01/26 Sun PM 09:45:57 EST
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Need help installing gnucash
On Sun, 2003-01-26 at 22:11, [EMAIL PROTECTED] wrote:
Hello all,
I
Ralph De Witt wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 17 December 2002 02:18 pm, John Richard Smith wrote:
Ralph De Witt wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi:
I am using a MSI KT3 ULTRA2 mobo. That has a VT 8233 AC97 sound chip using
the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi:
I am using a MSI KT3 ULTRA2 mobo. That has a VT 8233 AC97 sound chip using the
snd-via8233 sound driver. My problem is that sound in my games is choppy,
almost a stutter. This is true for the Mandrake games that installed from the
DVD as well
Ralph De Witt wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi:
I am using a MSI KT3 ULTRA2 mobo. That has a VT 8233 AC97 sound chip using the
snd-via8233 sound driver. My problem is that sound in my games is choppy,
almost a stutter. This is true for the Mandrake games that installed
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 17 December 2002 02:18 pm, John Richard Smith wrote:
Ralph De Witt wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi:
I am using a MSI KT3 ULTRA2 mobo. That has a VT 8233 AC97 sound chip using
the snd-via8233 sound driver. My
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi:
I have just done a new install of Mandrake 9.0 on a MSI KT3 ULTRA2
motherboard. I am having some problems with the DVD/CDrom. When I open a
cdrom to copy files to the hard drive the system is loosing files and
directories from the cd and a
Since no one could answer this question, I spent several hours looking for
the solution. My problem stems from the plugger.so plug-in having already
registered the pdf mime type to xpdf.
Here is what I found about how to fix it and make Adobe Acrobat the default
app for opening *.pdf files
I have a site that I must get *.pdf forms from, but xpdf persists in cutting
off one side so that I cannot print the form correctly. I discovered that
the Linux version of Acrobat does not do this, but Mozilla persists in
opening all *.pdf files with xpdf, even though I have set acroread to
Hi
I been trying to config X and not having much luck
i have an ATI xpert 128 pci video card and
an philps 109S monitor and it seem i have try so many settings
but not doing something right if someone
could tell me what settings i hould be adding and where thi would
be an big help
thanks in
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thursday 13 June 2002 9:32 am, _nasturtium wrote:
Hello,
I'm using GAIM (i downloaded MEGS of everybuddy mdk rpms and
none worked!) and i've loaded the msn plugin.
I can instant message, join chatrooms(MSN) but i can't start
a
Yay, got a sort of 8.2 running!
Turned out it was the new kernel my system didn't like. What I found
worked in the end was:
1. Boot from 8.2 disk (expert mode)
2. Select upgrade packages only
3. Boot with old-linux (i.e. the old kernel)
In fact I only upgraded the packages I needed - you
hi Robin,
can i check the version numbers of the following components?
1. kernel
2. xfree
3. any other you think may be helpful.
- Original Message -
From: Robin Turner [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, May 15, 2002 4:56 PM
Subject: Re: [newbie] need help
on this topic, pls do post it on this list.
thanks again.
- Original Message -
From: Robin Turner [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, May 10, 2002 4:16 PM
Subject: Re: [newbie] need help with Mandrake crashing problem
On Friday 10 May 2002 07:33, Stormjumper wrote
On Sunday 12 May 2002 12:05, Stormjumper wrote:
thanks for all the suggestions.
i do not have interrupt conflicts,
so thta isn't the problem.
this issue seems to be common, altho not
widespread amongst the recent distributions,
as i've tried Mandrake 8.2, Peanut 9.2,
gentoo 1.1a, so it
On Sunday 12 May 2002 09:05 pm, Stormjumper wrote:
snip
when i'm free, hopefully in abt 2 weeks,
i'll try to compile a early kernel,
with Mandrake 8.2 in console mode,
and see if my X will run w/o crashing.
(any suggestions? was thinking of 2.4.10 vanilla)
the other possiblility may be X
On Tue, 30 Apr 2002 01:08:51 -0700 Eric wrote:
I changed a line in this and now I can't boot up. Is there any way back
in so I can change it back?
Boot from the installation CD, hit F1 for more options and type rescue
at the prompt (without the quotes)
That gets you into your system.
Paul
--
On Tuesday 30 April 2002 01:08 am, you wrote:
I changed a line in this and now I can't boot up. Is there any way back
in so I can change it back?
Mithrilhall's Linux Server
AMD-K2 350MHz
http://mithrilhall.redirectme.net
This email has been scanned
may if you must try to recover from one backup file, please rename your old
inittab files, eveven worst but an idea, you can use another inittab files and
cfombine with your old corrupted files. Be carefully, not all services will be
running corectly but this is an start point.
Dr. gz
Eric
I changed a line in this and now I can't boot up. Is there any way back
in so I can change it back?
Mithrilhall's Linux Server
AMD-K2 350MHz
http://mithrilhall.redirectme.net
This email has been scanned with Norton AntiVirus
I've tried to install newspro on my linux mandrake 8.1 server. .. . It's a
perl script, when I try to run it in linux I get the following error
Access Forbidden Error 403 ...
I chmoded the files 777, and chmoded /usr/bin/perl 777 and still get the
error whats the problem???
Jesse Angell
Hi all,
I just bought a Cisco806 router. This is education price (about 50% off)
so I can not get any support from Cisco. Now, I have Cisco IOS Firewall
Features Set software which also available for free download. I don't
know how install this software on this router. Do I MUST use console
port
On Sat, 22 Dec 2001, Dave wrote:
I am having problems getting images from my usb sandisk cardreader.
Any ideas how I can access the sandisk? Hopefully as if it was just
another drive?
modprobe usb-storage
mount -t vfat /dev/sda1 /compactflash (or whatever mount point you want)
Dear linux-mandrake users:
I ever upgrade glibc-devel from 2.2.2 to 2.2.4 but it seem not nice to
compile my c++ program-many compile error, so I decide to erase 2.2.4
then reinstall 2.2.2
but when I do erase by rpm -e glibc-devel-2.2.4
[root@localhost ~/c_program]# rpm -e glibc-devel-2.2.4
On Tue, 01 Jan 2002 07:48:32 -0500, eric [EMAIL PROTECTED] wrote:
Dear linux-mandrake users:
I ever upgrade glibc-devel from 2.2.2 to 2.2.4 but it seem not nice to
compile my c++ program-many compile error, so I decide to erase 2.2.4
then reinstall 2.2.2
but when I do erase by rpm -e
rpm -e glibc-devel-2.2.4 --nodeps
then put the old one back on.
rgds
Frank
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of eric
Sent: Tuesday, 1 January 2002 8:49 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: [newbie] need help on erase glibc
Hi all,
I am having problems getting images from my usb sandisk cardreader. I
have configured my Kensington usb webcam.and had some success at
making it workbut what I really want to work is my usb
SanDisk cardreader. I have a hp digital camera with a 64mb sandisk
and would love
At 11:52 PM 11/25/2001 -0700, you wrote:
Hi,
Could please give an example of what you meant by Network Filesystem?
Typically this is a drive (in Windows) or a filesystem (in linux) that is
mounted from a different PC / server either via nfs (for linux) or via
samba (for windows).
Michael
--
Hi,
Could any of you please tell me how to setup my Linux server acts like
local (intranet) domain for all other computers (Win Linux). Do I need
to use any kind of software to setup local domain? What software is need
to setup proxy server on Linux machine? What is the difference between
proxy
Most on here seem to prefer squid for proxy software.It's available in mdk
8.1 I know for sure,or from squid-cache.org. There's a config file under etc
directory..something like /etc/squid/config :-)
ok..definitions.I'll do the best I can here,altho there are others that can
no doubt explain
Alright...From what I know here is what I think/can remeber
To serve windoze computers you want to use SAMBA, an open source
implementation of SMB.A GUI tool for this is GNOMBA.
To serve Linux Windoze computers depending on how many you have, I
reccomend setting up a Network Filesystem that
Hi,
Could please give an example of what you meant by Network Filesystem?
recomend setting up a Network Filesystem that serves all the clients as
though they where on.
Basically (cuz you wanted GUI stuff) setting up a proxy server could
probably be done in mandrake control centre
Miark,
I did the ln -s /dev/hdb /dev/dvd
and now show /dev/dvd.
I can read cdroms with the drive but with vlc
It doesn't display any dvd play lists or seem to access the drive.
If I use a file manager to look at the dvd disk then it shows
audio.ts and video.ts
Joe
[EMAIL PROTECTED]
Want to
Oh, not yet, what is the url to the new rpmdrake?
On Tuesday 23 October 2001 09:56 pm, you wrote:
Have you tried upgrading to the newest version of rpmdrake from one of
the ftp's on the website? I had a similar problem, but it was cleared
up by updating rpmdrake.
-Paul Rodríguez
On Tue,
I don't understand these errors.
How can I fix my rpmdrake?
It will not update my list of mirrors,
so I can't do any updates.
rpmdrake
* Connected to www.linux-mandrake.com (63.209.80.235)
GET /mirrorsfull.list HTTP/1.1
Host: www.linux-mandrake.com
Pragma: no-cache
Accept: image/gif,
On Wednesday 26 September 2001 22:11, you wrote:
Does anyone know how I can change the email address that i get these
messages sent to???
Thanks
Jeff
How about unsubscribing using your current e mail address and then
subscribing again with your new one ?
--
Poogle
Registered Linux user
If I do that I can't even get the Access Configuration error - maybe because it
doesn't know about port 3128? Is
this supposed to work without configuring it as a proxy?
On Wed, 12 Sep 2001 15:24:32 -0400, etharp wrote:
try turing off the proxy selection in win98
On Wednesday 12 September
Are the IP tables something I'm supposed to build? Does my squid.conf look ok to you?
If not, can you email
yours privately?
On Thu, 13 Sep 2001 15:37:59 -0400, etharp wrote:
yep, as i understand it, and I can connect to the net thru my linux dialup to
the other wife and kids winder$
I've been using 10.2.1.x for years here, I'll try changing ip's later. Where's the
internet connection sharing GUI? I'm
using v7.02
On Thu, 13 Sep 2001 16:02:10 -0400, etharp wrote:
I think it is OK but I am not positive if you are using a reserved for
home lans IP number. where did you
I'm trying to configure Squid with the following squid.conf file but I'm getting the
following error at the Win98
workstation..
Access control configuration prevents your request from being allowed at this time.
The workstation's address is 10.2.1.77 and it can ping and Telnet into the
I've been working on this for days, I swear it looks right based on the FAQ and Google
searches. When I try to
connect from a workstation I get..
access control configuration prevents your request from being allowed at this time
I'm trying to connect from a workstation with the address
hi, I have MDK 7.0 on CD, but my notebook doesn't have a CD-ROM.
It didn't let me do network install neither because Red Hat asks for more
than 16mb RAM. Is there any way I can install linux on it?
It is 133mhz, and 16mb RAM, will linux work ok with it?
Thanks
Eric
]
Sent: Tuesday, May 29, 2001 8:03 PM
Subject: [newbie] Need help on PCI Modem installation
Guys,
Pls. help. I have Mandrake 8 installed and it could not detect my
internal
modem. The modem specs are:
Manufacturer: Cirrus Logic, Inc.
Chipset: CL-MD5620-DT
Memory: 32K DSP RAM
UART
Guys,
Pls. help. I have Mandrake 8 installed and it could not detect my internal modem. The
modem specs are:
Manufacturer: Cirrus Logic, Inc.
Chipset: CL-MD5620-DT
Memory: 32K DSP RAM
UART: 16550AN
This modem works well in Windows. Any of you have this problem?
Thanks.
Deric
This is what you call a WINMODEM they use the OS (This case Windows) to
use the modem.
Linux does not support WINMODEMS Never will
You have to get a HARDWARE Modem or a External Modem.
On Wed, 30 May 2001 14:03:58 +0800 Frederic O Kho
[EMAIL PROTECTED] writes:
Guys,
Pls. help. I have
Negative. Winmodems are supported. http://www.linmodems.org
On Wednesday 30 May 2001 02:09, [EMAIL PROTECTED] wrote:
This is what you call a WINMODEM they use the OS (This case Windows) to
use the modem.
Linux does not support WINMODEMS Never will
You have to get a HARDWARE Modem or a
Hello.. Does anyone out there have Mandrake 7.2 on a Compaq 1800T?
I've got KDE running at 800/600... but that's all I can get after reading the
Linux-Laptop howto Kernel howto... even some Compaq 1800 specific helpiles.
Other people have done it...
The resolution goes up to 1400/1050.
I'm setting up a firewall system for a DSL connection using 7.1. I'm using
2 identical ISA NE2000 comp. cards. Win98, on the same machine, recognizes
both of them and sets them okay. I'm assuming I have to get Linux to
recognize these before I can assign them as eth0 and eth1. The installer
Lon Lentz wrote:
2 identical ISA NE2000 comp. cards. Win98, on the same machine, recognizes
same here
both of them and sets them okay. I'm assuming I have to get Linux to
recognize these before I can assign them as eth0 and eth1. The installer
You must first know the io and irq addresses
I can't get soundstudio to work, all versions are useless and broken,
one says:
[ntr@kittypuss ntr]$ studio
Error in startup script: couldn't read file
"/home/lenny/rpm/BUILD/SoundStudio/init.tk": no such file or directory
while executing
"source $MYFILES/init.tk
"
(file
It would seem that I have managed to install most of Corel Perfect
Office 2000 under Mandrake 7.2. When I execute wordperfect, as a user, I
get the following error messages:
No running font server was detected.
I will try to start a font server on this host
and then wait for 30 seconds
Install rp-pppoe. All you will need to know for that
install is your user name, password, and what eth card you will be using.
In my case Imade sure I chose eth0, which is the only eth card in
my box. When asked for a DNSnumber type 'server'. Choose 1,2,or 3
for the built in firewalling. Then,
I issued the following command to print a man page:
man -t mkfs | lpr
and got the following messages:
/usr/bin/groff: can't find `DESC' file
/usr/bin/groff:fatal error: invalid device `ps'
Error executing formatting or display command.
System command (cd /usr/share/man ; /usr/bin/bzip2 -c -d
I do have static ip and gateway,
I also tried both with ppoe and withuot pppoe in DSL network of
Drakeconf
I also tried adsl-start
pppoe(timeout)
but still failed
I can see my eth0 by ifconfig
my kernel is 2.2.17, DSL modem is Cisco 678 isp is qwest
not work need help
Anthony wrote:
not work right on 7.1.
my 2 cents.
Steelhead.
- Original Message -
From: eric [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Wednesday, February 23, 2000 12:13 AM
Subject: Re: [newbie] need help on DSL with LM7.2
I do have static ip and gateway,
I also tried both
PROTECTED]
Sent: Wednesday, February 23, 2000 12:13 AM
Subject: Re: [newbie] need help on DSL with LM7.2
I do have static ip and gateway,
I also tried both with ppoe and withuot pppoe in DSL network of
Drakeconf
I also tried adsl-start
pppoe(timeout)
but still failed
I can see my
Ok first about your CD rom. if you are using linix Mandrake 7.2
you should have Drake config installed. At least I do but I not running
linux4Windows. Run drake config (go into) - "linix config - system
configutartion" - file systems - access local drive. From there you
should be able to mount
I had Qwest.net 's Cisco 678 dsl modem and intel ethernet card, my isp
told me my scriber line is on and three green light on dsl modem (lnk of
wan and lan adn power) os keep on with yellow flash light on ACT of wan
and lan
I tried to use DrakeConfig and pppoe wtih dhcp
still get error
The
Hi everybody,
I want to make a backup of KDE before I try to upgrade again to KDE2.1
beta 2. I'm trying use Midnight Commander. However, the directory seems
rather small after moving it to /usr/local.
Any tips out there?
--
Roman
Registered Linux User #179293
Little Tux Email
Hi
I just installed Mandrake 7 and I need to know how
to brighten up the screen!Like adjust my gamma!or change the background
wallpaper to lighter!
Also need to know how to connect to the
net!
Thanks
Mark
PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of MNSent: 07 February 2001 18:14To:
[EMAIL PROTECTED]Subject: [newbie] Need
help
Hi
I just installed Mandrake 7 and I need to know
how to brighten up the screen!Like adjust my gamma!or change the background
wallpaper to lighter
: RE: [newbie] Need help
To
connect to the web, use KPPP or Gnome Dialer
I'd
recommend KDE, but that's a personal choice.
Check out http://www.linuxnewbie.org/nhf/intel/modems/kppp1.htmlor
http://64.209.212.162/dell/step/0,2595,26538+28719+29773+29775_0,00.html
Dave
: [newbie] Need help
Hi
I just installed Mandrake 7 and I need to know
how to brighten up the screen!Like adjust my gamma!or change the background
wallpaper to lighter!
Also need to know how to connect to the
net!
Thanks
Mark
ok, this is the first time i've ever posted a question, and i'm not very
knowlegdeable with linux at all, so forgive me if i ask questions with
painfully obvious answers. first off i guess i should say that i am using
linux mandrake 7.2 complete. i am trying to learn c programming, so i need
On Thursday 01 February 2001 06:19 pm, mike smalheiser wrote:
ok, this is the first time i've ever posted a question, and i'm not
very knowlegdeable with linux at all, so forgive me if i ask
questions with painfully obvious answers. first off i guess i should
say that i am using linux
thanks alot, your tips and another guys tips combined worked fine.
-Johan-
At 09:05 2001-01-03 +0100, you wrote:
On Wednesday 03 January 2001 00:21, you wrote:
All I have now is 33 rpm files in a dir and I have no idea what
to do next.. when I try to unpack a file it says it can't because
All I have now is 33 rpm files in a dir and I have no idea what
to do next.. when I try to unpack a file it says it can't because
it depends on another file.. I'm really confused here :)
-Johan-
I can't say whether this is the "best" way, but here's what I did:
1. Starting with a reasonably fresh install of 7.2...
2. From the URL in the announcement message, download all the RPMS. Put them
in a directory.
3. Create a subdirectory called "libical" and move the libical RPMs into it.
On Wednesday 03 January 2001 00:21, you wrote:
All I have now is 33 rpm files in a dir and I have no idea what
to do next.. when I try to unpack a file it says it can't because
it depends on another file.. I'm really confused here :)
-Johan-
You may need to go through clearing out the
Hi
I have a clean install of Mandrake 7.2 power-pack. I have chossen the
recommend install all option. I have updated all packages that were available
in the normal/security update area. I have Samba-Common and Samba-Client
2.0.7-18mdk installed. I finally got around to modifing my smb.confg
For starters, try going through your BIOS and setting "Plug 'n Play OS" to
"no". This worked for my SMC PCI card, which uses the Realtek RTL8029 driver.
On Fri, 15 Dec 2000 03:12, Travis Mcbride wrote:
I am getting an eth0 initilization has failed error
message at bootup. Can anyone tell me
Did you install a dhcp client and set you card to get info thru dhcp?
If you haven't installed dhcpcd from the mandrake cd. then type
ifup eth0
This will bring up eth0 interface .
Sofian
Get a Free Linux Guestbook at http://www.iamnewbie.com
On Thursday 14 December 2000 18:40, you wrote:
There should not be any problem with the config of eth0. It might fail in
the initial stages for u may not have given the proper ip addrress etc.Pl
go to DRAKECONFIG and do the needful. Try giving the ip of 127.0.0.1 for
the loopback and 192.168.1.1 with netmask 255.255.255.0 Give ilt a local
I am getting an eth0 initilization has failed error
message at bootup. Can anyone tell me how to fix
this. The machine recognizes my ethernet card and I
know I have the right module setup.
Thanks Travis
__
Do You Yahoo!?
Yahoo! Shopping -
I need help setting up my cable connection. I am
unable to connect through netscape. The error message
says that all the local hosts are unknown. I recieved
information from the support team on how to set my
connection up. I did exactly what they told me to do
and it didn't work.
Network
.
Joseph Red
[EMAIL PROTECTED]
- Original Message -
From: "Travis Mcbride" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, December 14, 2000 8:13 AM
Subject: [newbie] NEED HELP SETTING UP MY CABLE CONNECTION FOR MANDRAKE 7.0
I need help setting up my cable connect
PROTECTED]
- Original Message -
From: "Travis Mcbride" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, December 14, 2000 8:13 AM
Subject: [newbie] NEED HELP SETTING UP MY CABLE CONNECTION FOR MANDRAKE 7.0
I need help setting up my cable connection. I am
unable
: "Travis Mcbride" [EMAIL PROTECTED]
To: "Joseph Red" [EMAIL PROTECTED]
Sent: Thursday, December 14, 2000 9:30 AM
Subject: Re: [newbie] NEED HELP SETTING UP MY CABLE CONNECTION FOR MANDRAKE
7.0
--- Joseph Red [EMAIL PROTECTED] wrote:
Most likely you need to enter the DN
Dear any linux user or expert:
I had compaq notebook , it had VIA 97 pci sound card, but my
sounddrake response as
Can not read /usr/share/harddrake/soundcard
it also show a panel Select an Sound Card
it default put me as
SB
that is not my card, and I can not find VIA chip on it
I check
I just add 2 more 128MB SDRAM-100 to my system
but BIOS recognize only 393216KB, if I remove one
it recognized 327680K, if I put only 2 news 128MB the
bios recognize 262144K correctly.
I try with BIOS 2.4 / 2.5 / F1F /F1K /F1L/ F1M /F1N
what should I do I wants my system to recognize
all 512MB
Installed LINUX 7.1 abt. 3 weeks ago. Everything was going good
booting from win to LINUX Until I restarted my PC and I got.
---
stage1 stage 2
GRUB version 0.5.94 (638K lower / 65526K upper memory)
[ Minimal Bash-like line editing is supported. For the first word,
TAB lists possible
Are you using lin4win?
Michael Mordenti wrote:
Installed LINUX 7.1 abt. 3 weeks ago. Everything was going good
booting from win to LINUX Until I restarted my PC and I got.
---
stage1 stage 2
GRUB version 0.5.94 (638K lower / 65526K upper memory)
[ Minimal Bash-like line editing is
this happened to me once as well, question did you make a boot disk for
linux
how did you install linux are you using win4lin?
if you answered no to those then probably the best thing is to install a new
boot loader i find grub to be a pain in the butt and even my linux boot disk
doesnt
Does just plain "su" work?
I share a box with three other people and we are having a murderous time
getting the paths correct. Can anyone explain the secrets of setting up
paths?
The current problem is all of us have the path setup correctly under our
usernames. If we 'su - root' the
The current problem is all of us have the path setup correctly under our
usernames. If we 'su - root' the paths are still correct. However, if we 'su
root', no dash, then for two of us the paths are correct but for the
other, her path's are screwed up. We are all using bash. I don't
I share a box with three other people and we are having a murderous time
getting the paths correct. Can anyone explain the secrets of setting up
paths?
The current problem is all of us have the path setup correctly under our
usernames. If we 'su - root' the paths are still correct. However,
101 - 200 of 292 matches
Mail list logo
