Re: [newbie-it] R: [newbie-it] Perch s'impianta?
Ciao Ferdinando alle 17:48, domenica 26 maggio 2002, hai scritto: cut Cerca di fare lo stesso test anche sotto win e controlla se non vede le stesse locazioni. Ci sto' provando. Sempre per quanto riguarda win, c'è da considerare che è lo stesso sistema che si incarica di gestire tutta la memoria, e quindi, probabilmente, è il sistema che è in grado di riconoscere e saltare le parti difettose. Uhm, un punticino a favore di win? ;-) Se vuoi fare una prova più drastica, leva un banco alla volta (suppongo che tu abbia due banchi da 128 M) e vedi come si comporta il sistema. Nel fine settimana lo faccio, mi serve un amico + esperto. Credo di non aver problemi nel togliere le memorie, anche se non l'ho mai fatto, ma se capitasse qualche inconveniente è bene avere un pronto intervento vicino.. :-) Ciao e fammi sapere. Ok ciao e grazie ku68
Re: [newbie-it] [newbie_it]UNSUBSCRIVE
On Mon, 27 May 2002 18:33:40 +0200 [EMAIL PROTECTED] wrote: Perché ogni tanto qualcuno decide di rompere le scatole a tutta la lista, sfoggiando un pessimo inglese, per rimuoversi? E` di per se evidente che ci debba essere un meccanismo separato: se su una ML grossa, diciamo qualche migliaio di iscritti, chiunque volesse entrare o uscire lo comunicasse a tutti sarebbe un inferno. ;-) Per evitarlo sympa (il gestore di questa ML) rinvia immediatamente al mittente qualunque messaggio in lista che contiene la parola rimuovi l'iscrizione scritta in inglese corretto. Credo mandi anche un messaggio di istruzioni su come rimuoversi correttamente. In ogni messaggio della ML, tra headers completi, che possono essere visualizzati con qualsiasi mailer, sono spiegate le modalità per rimuoversi correttamente: - scrivendo la parola innominabile a [EMAIL PROTECTED] e non a [EMAIL PROTECTED] - oppure, andando sulla magina Mailing-Lists del sito Mandrake ciao, Andrea
[newbie-it] Schede tv
Cari amici, quale scheda tv mi consigliate per vedere i mondiali con linux, e poter registrare anche la finale? Grazie a presto P.S. Ho una xtreme 98 non riesco a farla funzionare con il pinguino
Re: [newbie-it] konqueror
Puoi anche rinunciare, tanto dipende dal sito (si vede solo con Explorer). Prova a fare come ho fatto io, cioè mandagli una e-mail dicendo che non esiste solo Explorer e che se vogliono continuare ad avere cienti, in generale, è meglio che si tengano aggiornati e non facciano fare i siti a chi non li sa fare. Anzi, invito tutti quelli che si sono iscritti a tale sito ( gli altri è meglio di no perchè questi a malapena si caca.. i clienti) di sollecitarli a renderlo più decente. Non è solo una questione di Linux contro Windows ma anche di funzionalità in quanto un sito che tratta i tuoi dati personali deve avere maggior sicurezza: infatti dopo essersi loggati l'unico modo per sloggarsi è di chiudere tutte le finestre del suddetto browser (scrauser sarebbe meglio!) e cancellare i cookies (non me lo sono inventato ma è quello che consigliano onde evitare che qualcuno che usi il computer dopo di te riacceda alla tua pagina!) Ciao a tutti P.S: l'indirizzo a cui scrivere è [EMAIL PROTECTED] Ve lo dico perchè nella loro infinita intelligenza non ti danno la possibilità di vederlo se non sei loggato. Il 18:51, sabato 25 Maggio 2002, luigi hai scritto: ciao ragazzi ho la 8.2 il mio konqueror ma anche tutti gli altri browser installati non mi permettono di visualizzare la parte in alto a sx del sito www.omnitel.it dove praticamente c'e il login ho installato anche l'ultimo java 13ecc.. a voi va? grazie ciao p.s. a morte bill
[newbie-it] unsubscrive
unsubscrive
[newbie-it] Schede TV
Cari amici, quale scheda tv mi consigliate per vedere i mondiali con linux(possibilmente compatibile al 100% con MDK82) , e poter registrare anche la finale? Grazie a presto P.S. Ho una xtreme 98 non riesco a farla funzionare con il pinguino
[newbie-it] lilo.conf
E' possibile visualizzare al boot di lilo nomi più dettagliati per ciascun sistema da avviare senza dover sottostare al limite delle label in lilo.config ? Saluti da Giuseppe.
Re:Re: [newbie-it] konqueror
Il mar, 2002-05-28 alle 10:32, Germano ha scritto: Puoi anche rinunciare, tanto dipende dal sito (si vede solo con Explorer). Prova a fare come ho fatto io, cio mandagli una e-mail dicendo che non esiste solo Explorer e che se vogliono continuare ad avere cienti, in generale, meglio che si tengano aggiornati e non facciano fare i siti a chi non li sa fare. Anzi, invito tutti quelli che si sono iscritti a tale sito ( gli altri meglio di no perch questi a malapena si caca.. i clienti) di sollecitarli a renderlo pi decente. Non solo una questione di Linux contro Windows ma anche di funzionalit in quanto un sito che tratta i tuoi dati personali deve avere maggior sicurezza: infatti dopo essersi loggati l'unico modo per sloggarsi di chiudere tutte le finestre del suddetto browser (scrauser sarebbe meglio!) e cancellare i cookies (non me lo sono inventato ma quello che consigliano onde evitare che qualcuno che usi il computer dopo di te riacceda alla tua pagina!) Ciao a tutti P.S: l'indirizzo a cui scrivere [EMAIL PROTECTED] Ve lo dico perch nella loro infinita intelligenza non ti danno la possibilit di vederlo se non sei loggato. Il 18:51, sabato 25 Maggio 2002, luigi hai scritto: ciao ragazzi ho la 8.2 il mio konqueror ma anche tutti gli altri browser installati non mi permettono di visualizzare la parte in alto a sx del sito www.omnitel.it dove praticamente c'e il login ho installato anche l'ultimo java 13ecc.. a voi va? grazie ciao p.s. a morte bill Io ho installato la Suse 8.0 che include il kde3 e Netscape 6.2. Con Netscape sono riuscito a caricare bene la pagina di Omnitel ma con il nuovo Konqueror non ci sono riuscito .
Re: [newbie-it] Re: Problemi (grossi) con X
Ho cancellato per sbaglio le precedenti mail, qual il tuo problema? Da quel che ho potuto capire dal file di log vedi il desktop a 640x480, giusto? (II) RADEON(0): Not using default mode "700x525" (hsync out of range) (II) RADEON(0): Not using default mode "1400x1050" (hsync out of range) (II) RADEON(0): Not using default mode "700x525" (hsync out of range) (II) RADEON(0): Not using default mode "1600x1024" (hsync out of range) (II) RADEON(0): Not using default mode "800x512" (hsync out of range) (--) RADEON(0): Virtual size is 640x480 (pitch 640) (**) RADEON(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz (II) RADEON(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (--) RADEON(0): Display dimensions: (260, 200) mm (--) RADEON(0): DPI set to (62, 60) (II) Loading sub module "fb" Ma il tuo monitor settato giusto? (**) |--Screen "screen1" (0) (**) | |--Monitor "Generic|Super VGA estesa, 800x600 a 60 Hz, 640x480 a 72 Hz" (**) | |--Device "ATI Radeon" I seguenti messaggi di avviso sono dovuti al fatto che le risoluzioni testate escono fuori dal range possibile della sincronizzazione orizzontale del monitor: (II) RADEON(0): Not using default mode "700x525" (hsync out of range) (II) RADEON(0): Not using default mode "1400x1050" (hsync out of range) (II) RADEON(0): Not using default mode "700x525" (hsync out of range) (II) RADEON(0): Not using default mode "1600x1024" (hsync out of range) (II) RADEON(0): Not using default mode "800x512" (hsync out of range) possibile che sia questo il tuo problema. Ciao ENx
[newbie-it] Scheda con tv out
Ciao a tutti, ho una radeon ve con tv out, qualcuno saprebbe dirmi come fare ad usare l'uscita tv? Grazie a tutti ENx
Re: [newbie-it] lilo.conf
On Tuesday 28 May 2002 11:48, Giuseppe Ferruzzi, talkin' about [newbie-it] lilo.conf wrote: E' possibile visualizzare al boot di lilo nomi più dettagliati per ciascun sistema da avviare senza dover sottostare al limite delle label in lilo.config ? ehm, cambiare le label nel lilo.conf? (non so se abbiano un limite di lunghezza, dipende sempre da quanto vuoi dettagliare) bye -- Devil Inside Experiment - C'era un bambino che odiava la polizia http://www.acidlife.com/mayhem/freefred/ Davide Banda Partial Arts [2000] - http://web.genie.it/utenti/f/freefred/ ICQ uin 5887365 - PGP key available on keyservers
Re: [newbie-it] lilo.conf
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Il 17:48, martedì 28 maggio 2002, in merito a [newbie-it] lilo.conf, Giuseppe Ferruzzi ha scritto: E' possibile visualizzare al boot di lilo nomi più dettagliati per ciascun sistema da avviare senza dover sottostare al limite delle label in lilo.config ? si basta cambiare le label :) ... image = /vmlinuz-2.4.18 root = /dev/hda3 label = Slackware ... Saluti da Giuseppe. bye miKe __ Slackware 8 GNU/Linux 2.4.18 hp Xe3 R.U.#219755 - S.R.U.#705 - R.M.#110932 - -- -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE88/L8F/9fksDJ4y0RAmbIAKDAqF8GI7+OIEgI2pIaD5iNc+pD9wCfW0kU uuYDvwNdkHTQcRjHlFXmaVQ= =C0gg -END PGP SIGNATURE-
[newbie-it] Voodoo3 3500TV e KVinTV
Salve, mi rivolgo nuovamente alla ML per una problema che mi affligge da sempre (almeno con Linux), ovvero il non riuscire ad utilizzare il sintonizzatore TV con Linux. Come da oggetto la mia sk video e' una Voodoo3 3500TV. Come posso fare? -- Vincenzo TheJack Tiziani www.stargazer.itwww.iammol.com
RE: [newbie] subscription
Title: Message To what? -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of alexSent: Monday, May 27, 2002 10:08 PMTo: [EMAIL PROTECTED]Subject: [newbie] subscription PLEASE CANCEL MY SUBSCRIPTION THANK YOU IncrediMail - Email has finally evolved - Click Here Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Quake 3...again
Brian Koppe wrote: Hello everyone, I just reinstalled Linux this past weekend using ext3 and just began to reinstall Quake 3 Arena. So, I open up the manual and so as it says - go to /mnt/cdrom and then sh setup.sh Now, I know this works because, well, I've done it twice before - using ext2 - and I've installed Quake 3 and played it just fine. This time however, I type sh setup.sh and I get the following: setup.sh: setup.sh: No such file or directory Well, obviously there is a setup.sh - I've run it twice to install Q3A twice. But this time it doesn't find it. I open Konqueror to have a look at the CD. Not there. All that IS there is a bunch of jpegs and gifs of the characters and such. Nothing but image files. My only thought on this is that, for some reason, I can't read the D fully because I'm using ext3. Doesn't make sense to me, but I don't know what else it could possibly be. Any ideas? Thanks! Brian you have to d/l the file from ID's software site :) ftp://ftp.idsoftware.com/idstuff/quake3/linux/ try that ftp site if thats not it, i'll dig through myother emails Get the right one. -- Femme Good Decisions You boss Made: We'll do as you suggest and go with Linux. I've always liked that character from Peanuts. - Source: Dilbert Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Digest version of Newbie available
On Tue, 28 May 2002 15:12, Sridhar Dhanapalan wrote: On Mon, 27 May 2002 20:46:01 -0600 (MDT), Jim Turner [EMAIL PROTECTED] wrote: Someone else here may be better qualified to answer about how big each partition should be; but then, it really depends on what you want to do anyway. I believe the rule of thumb for swap is to make it about the same size as your physical memory. As such, I have 128 meg RAM, and a 128 meg swap. The generally accepted rule-of-thumb is to have a swap size of twice your RAM. In your case, you would be better off with a swap of 256MB. In general practice, there is little to gain from having a swap of over 512MB on a standard desktop system (though it may be useful for servers and workstations). Not sure where the subject line came from, is this a piggyback thread? Certainly got my attention. Sounds like the hard drive is already partitioned and you have no qualms about wiping one, or more, of the partitions to install Linux on. Mandrakes Linux is real user freindly in this respect. The install has a GUI that lets you delete existng partitions without molesting others. If you are able to make the deletable area contiguous --- big word for the day, WOOHOO! and you allow 4Gig or more. then the install will suggest sizes for the various partitions. As a first timer, i recommend you accept the suggestions as they stand. You can always reinstall later. Leaving a Fat32 partition even if you have NTFS is also good advise as Linux reads and writes well to Fat32. NTFS can become troublesome. Ext2 WAS the main Linux partitioning filesystem of the past. But it is well dated and now is superceded by several good modern journaling filesystems. Mandrake's 'tester' has recommended on this list that he has few probs with any of them (ext3 has some iffy's) but that in his experience XFS is as close to bulletproof as it gets. This is selectable as part of the install during the partitioning phase as well. No flame war on that recommend plz. I recommend you also go for a browse through ZDNet for hardware compatability. Be prepared to keep a good log of what you do post install that effects your system. Oh... yeah, i say to much sometimes chow -- Michael Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Power Mac G3 Desktop built in ethernet card help
Can someone who is running Mandrake 8.2 PPC on an original Power Macintosh G3 Desktop tell me whether you have successfully configured the built in ethernet card? I am trying to determine whether this ethernet card is supported or whether I've got an issue with my setup... The Power Mac G3 driver is not working for me. I tried the other Apple drivers, but none of these worked either. If you were successful in setting up the ethernet card could you please tell me which driver you used? Thanks, any help is appreciated. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Video again
On Tuesday 28 May 2002 02:37, Nicolas VERITE wrote: USB is for photos and the MPEG low quality videos, FireWire (or iLink) is made for DV video. Ah, all is now clear! So I can, in theory, get my camcorder to stream crappy video through the USB port, but if I want to do anything serious, I should buy a FireWire card. Sir Robin -- The reason we come up with new versions is not to fix bugs. It's absolutely not. It's the stupidest reason to buy a new version I ever heard. - Bill Gates Robin Turner IDMYO, Bilkent Universitesi Ankara 06533 Turkey http://www.bilkent.edu.tr/~robin Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Flash plugin in Konq again
On Monday 27 May 2002 10:12 pm, Carroll Grigsby wrote: Gerald: I got the same rpm from www.rpmfind.net; it worked fine for me. What KDE are you running? -- cmg I am using KDE 2.2.1-7 It installed with my Mandrake 3 CD set. I found this URL for the rpm, but it won't download. ftp://rpmfind.net/linux/Mandrake/8.1/i586/Mandrake/RPMS//kdebase-nsplugins-2.2.1-7mdk.i586.rpm Does anyone happen to have this RPM? And can I get it. -- Gerald Waugh http://www.frontstreetnetworks.com :: Phone. [011] 203.785.0699 Front Street Networks LLC | SOHO Networks, Web Site Hosting, Cobalt Consulting 229 Front Street, Ste. #C, New Haven, CT, 06513-3203 United States:wq Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] DosEmulator
How do I access the DOD emulator? Or, for that matter, does Mandrake 8.2 even COME with one? On a happier note, I managed to get something to install! Now I get to try it again with somethingthat's actually USEFUL. I can't wait 'till I can build my dream system! Iceburgh69 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Tv Card
nope no need to mount anything. do you dual boot? does it work under windows? what Mobo and chipset do you have (known problems with Ali and via chipsets, and pci tv cards) On Monday 27 May 2002 10:57 pm, you wrote: I have already changed this settings but Im unable to watch tv. Do I have to mount this divice? Any ideas? You Wrote: -- left click on the picture box, and turn off overlay, and turn on ntsc (not pal) edit channels to suit you, save and close, this assumes the USA (bellsouth.net). On Monday 27 May 2002 04:15 pm, you wrote: On Monday 27 May 2002 10:55 am, Misael M. wrote: I have a Brooktree Tv card but I cant watch tv in my linux box. xawtv does not found any channel. Does anyone know how to fix this? thanks try scantv or look for their site for a config template (~/.xawtv). -s ___ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Video again
Robin Turner wrote: On Tuesday 28 May 2002 02:37, Nicolas VERITE wrote: USB is for photos and the MPEG low quality videos, FireWire (or iLink) is made for DV video. Ah, all is now clear! So I can, in theory, get my camcorder to stream crappy video through the USB port, but if I want to do anything serious, I should buy a FireWire card. Sir Robin That's how I've seen many camcorders work... For example, in the Sony line of camcorders, you have the Memory Stick cards in which you can store photos, but also low-quality MPEG videos copied from your DV tape (10 to 15 sec max for around 1 MB). This can be usefull for video-e-mails... Read the docs and try... everything ! Everything is not usefull for anybody... Nÿco Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Voodoo3 TV
Anyone know if there's drivers for a Voodoo3 3500TV? Specifically, what programs would be used to watch TV using the video input feature of that card? Thanks Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Canon S200SP
On Tuesday 28 May 2002 1:57 am, Brian Parish wrote: A friend running LM8.2 has a Canon S200SP printer. PrinterDrake sees it as a BJC-240. It prints fine, but is very grey - like draft quality all the time. Anyone having success with this printer? cheers Brian I do not have a Canon printer, but there is an article on the Mandrake club page which might interest you. If you are not a member here is the relevent text Canon Canon makes some rather cool Color inkjet printers (S600, S800, ..), which produce very fine quality photo printing at affordable price. Both ink and printers are fairly priced, and many people are swearing that the quality of prints on their S* model is at least as good as on Epsons, for a fraction of price. Unfortunately, free drivers for these printers do not match the quality of the drivers offered for HP and Epson models, and the only way to get a photo-quality prints on these printers is by using the turbo print drivers. An RPM with turbo-print drivers is available for download on MandrakeClub. Turbo-print drivers are reported to work nicely, but please keep in mind that these drivers are neither free software, not propriatery but free of charge: they come as a shareware, with special conditions for private use. Turbo Print is on the commercial CD's of a Mandrake power pack or may be downloaded for free for personal use (with slightly degraded performance compared to the paid for version) from http://www.turboprint.de/english.html I have heard that it is really good :-) derek Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Driver insallation problems with Cisco Aironet 350 PCI wireless network card wth mandrake 8.2
On Tuesday 28 May 2002 2:26 am, Gary K Stinnett Jr wrote: Looking for help when installing cisco aironet 350 PCI wireless network card. When installing and configuring help page from cisco says to type sh ./kpciinstall but I do not see or have that file to my knowledge. I have tried to use the cwinstall file that was a part of the driver download from cisco. It seems to work untill I get to a point where it asks me to enter the path to the file pcmicia-cs file. I have searched for this file but have not found it. I have looked at my installed RPM and it shows that it is installed. Any sugestions? thanks Gary Mandrake supports Cisco Aironet out of the box. You should not need to install anything. You can see the drivers in /lib/modules/2.4.18-6mdk/pcmcia All you should need to do is run the network wizard from within Mandrake Control centre. It should find your wireless card and prompt you for the wireless parameters (encryption key etc) If your system cannot find your pcmcia card check that the file /etc/sysconfig/pcmcia reads PCMCIA=yes HTH derek Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] blackhawk digital in linux ?
Hello, Could someone tell me how to add/use my Gravis blackhawk digital joystick in Mandrake 8.2 , it is connected through my Creative 128 sound card. Thankyou, Rodney Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] DosEmulator
On Tuesday 28 May 2002 04:14 am, Chris Ames wrote: How do I access the DOD emulator? Or, for that matter, does Mandrake 8.2 even COME with one? Cut'n paste this line, file:/usr/share/doc/HOWTO/HTML/en/DOSEMU-HOWTO.html into a browser and hit Enter --or-- on your main menu, under Documentation | Howtos, you should also see the dosemu howto. My 8.2 install has the dosemu docs installed but not the rpm's. Software Manger says there's 3 for dosemu on CD#2 of the D/L Edition. That's as far as I can go, I've never used/needed to use dosemu. -- Tom BrinkmanCorpus Christi, Texas Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Quake 3...again
On Monday 27 May 2002 08:06 pm, Brian Koppe wrote: Ok - weird. I decided, just going on a limb, to switch the disc from my CD-RW to my DVD-ROM. Now I can read it just fine - with setup.sh and all. However, the interesting part is that I don't see the files I see when I read it with my CD-RW! Does anyone have any idea why the two are reading the drives differently? Thanks Brian Do a Google on CD drives and you'll get lot'sa info. Basically tho, CD and DVD and CD-RW drives all use slightly different laser wave lengths/widths. Particularly between CD and CD-RW drives. Another issue is any drive that spins CD's over 12x are prone to wear and the spindle starts wobbling slightly. Specially drives than are rated 32x and over. Often enough to make the media hard or impossible to read. Then there's the media itself. The quality and useability varies widely, sometimes even within a brand name spindle of 50 CDR's. Same is true for production CD's (ie, manufactured, not recorded). Some CD-RW drives (eg, Plextor, Yamaha) are known to work well with even poor media. Other drives (eg, Sony, HP) are know to be more fussy. 'Bout all you can do to minimize these situations is thru trial'n error, find media that works well with your CD-RW, and never burn faster than 8x. If you still encounter problems, burn at 4x. -- Tom BrinkmanCorpus Christi, Texas Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Netatalk - compiling
Did anybody of you install netatalk on your Mandrake Distro? I downloaded the source code from www.anders.com/projects/netatalk, followed the instructions and after the first make command I got the following errors: /usr/lib/libwrap.a(hosts_access.o): In function `host_match': hosts_access.o(.text+0x209): undefined reference to `yp_get_default_domain' collect2: ld returned 1 exit status make[4]: *** [afpd] Error 1 make[3]: *** [all] Error 2 make[2]: *** [afpd] Error 2 make[1]: *** [../../etc] Error 2 make: *** [all] Error 2 If anybody has an idea or experience installing netatalk please contact me, or answer here of course. Thank you Regards Yvan -- GMX - Die Kommunikationsplattform im Internet. http://www.gmx.net Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Driver insallation problems with Cisco Aironet 350 PCIwireless network card wth mandrake 8.2
I use the Cisco Aironet Wireless card on my laptop here at work, and the only thing I had to do to get it to work was to simply plug it in .. it automatically loaded the appropriate drivers and installed the necessary kernel module to be able to access it. I didn't even have to go to Cisco's website and download any drivers. This was the easiest hardware install I have ever done, on ANY OS. Terry On Mon, 2002-05-27 at 21:26, Gary K Stinnett Jr wrote: Looking for help when installing cisco aironet 350 PCI wireless network card. When installing and configuring help page from cisco says to type sh ./kpciinstall but I do not see or have that file to my knowledge. I have tried to use the cwinstall file that was a part of the driver download from cisco. It seems to work untill I get to a point where it asks me to enter the path to the file pcmicia-cs file. I have searched for this file but have not found it. I have looked at my installed RPM and it shows that it is installed. Any sugestions? thanks Gary Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Latest Nvidia drivers
I just downloaded and installed the latest nvidia drivers, but im still having problems loading up glx on my computer. Anyone had any similar problems with nvidia drivers? Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] KDE startup question...
On Monday 27 May 2002 01:20 pm, you wrote: Hey Darklord, Getting ready to have some ribs over here in Gas Fork holler. Randy You woof-woof, I love bar-b-que ribs grin Well...eat 3 for me... ;-) -- /\ DarkLord \/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Latest Nvidia drivers
On Tuesday 28 May 2002 4:18 pm, Tim Ford wrote: I just downloaded and installed the latest nvidia drivers, but im still having problems loading up glx on my computer. Anyone had any similar problems with nvidia drivers? A few thoughts for you to check out:- Look in /usr/X11R6/lib/modules/extensions if you have a file called libGLcore.a then rename it or else GLX will not load correctly. I assume you have edited /etc/X11/XF86Config-4 correctly ? InsertLoad glx in the Modules section EditDriver nvidia in the Graphics section You do have Xfree 4.x enabled do you? Xfree3.x is not going to work. Try running glxinfo in a terminal. If you get pages of output then glx is working. Look in /var/log/XFree86.0.log for errors when loading X post the errors here if you do not understand what they mean. HTH derek Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: Re: [newbie] Tv Card
Yes, it works under windows. what is Mobo? I think brooktree is the Chipset, and is a pci tv card. You Wrote: -- nope no need to mount anything. do you dual boot? does it work under windows? what Mobo and chipset do you have (known problems with Ali and via chipsets, and pci tv cards) On Monday 27 May 2002 10:57 pm, you wrote: I have already changed this settings but Im unable to watch tv. Do I have to mount this divice? Any ideas? You Wrote: -- left click on the picture box, and turn off overlay, and turn on ntsc (not pal) edit channels to suit you, save and close, this assumes the USA (bellsouth.net). On Monday 27 May 2002 04:15 pm, you wrote: On Monday 27 May 2002 10:55 am, Misael M. wrote: I have a Brooktree Tv card but I cant watch tv in my linux box. xawtv does not found any channel. Does anyone know how to fix this? thanks try scantv or look for their site for a config template (~/.xawtv). -s ___ ___ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] x config
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I would like to remove any garbage from my x config file, where should I start to see what configuratio is actualy used by my computer ? Bye the way, I'm getting this error: INIT: ld 'x' respawning too fast: disabled for 5 minutes. Do you know what does it mean ? Thank you. - -- Pupeno: [EMAIL PROTECTED] http://www.pupeno.com.ar -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE8846AWhjnmGRO4vQRAs5vAJ0Slkcc2vBRr4zfNKKweBxaQcmcSwCfZNv7 nm1O0SmARP+X+ePanWlrh40= =GiUt -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Sound Card Configuration
Hi, How do I configure my soundcard on Mandrake 8.0 ? Thnx, spyross Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] x config
On Tuesday 28 May 2002 07:04 am, Pupeno opened a general hailing frequency and transmitted to all open stations: Bye the way, I'm getting this error: INIT: ld 'x' respawning too fast: disabled for 5 minutes. any of a number of things. i have seen that because the default manager (usually kdm) was removed, because the font server is broken, because of really bad video settings... lots of reasons. is there another error listed before this message? can you change to runlvl 3 and then start x? have you recently removed kde or font or gnome packages? did x ever work on this machine? -- ...so Mr. Gates, in short, the reason I am not using your software is that I have upped my standards. So up yours. shane Profile at: http://dmoz.org/profiles/shen.html Proud to be a DMOZ editor since 10-98 Mandrake Users Club Member http://www.linux-mandrake.com/en/club/ Registered linux user #101606 http://counter.li.org/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] x config
On Tuesday 28 May 2002 17:19, daRcmaTTeR wrote: On Tue, 28 May 2002, Pupeno wrote: -pgpenvelope processed message I would like to remove any garbage from my x config file, where should I start to see what configuratio is actualy used by my computer ? Bye the way, I'm getting this error: INIT: ld 'x' respawning too fast: disabled for 5 minutes. Do you know what does it mean ? Thank you. -- Pupeno: [EMAIL PROTECTED] http://www.pupeno.com.ar Hi Pupeno, The error you're getting means that X isn't setup correctly on your machine. what version did you install on your machine. X and your vid card and/or the monitor aren't getting along very well. as for your X config file goes...once you've got X installed and configured correctly for your system leave that puppy alone or bad thing can and will happen. there really isn't anything to clean out or it. I got this once I think it was after a power cut resulted in file corruption (this was before I switched to a journalling filing system). Try reconfiguring X using xf86config. If that doesn't work, try reinstalling X, then reconfiguring. Sir Robin -- The reason we come up with new versions is not to fix bugs. It's absolutely not. It's the stupidest reason to buy a new version I ever heard. - Bill Gates Robin Turner IDMYO, Bilkent Universitesi Ankara 06533 Turkey http://www.bilkent.edu.tr/~robin Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Tv Card
On Monday 27 May 2002 21:15, you wrote: On Monday 27 May 2002 10:55 am, Misael M. wrote: I have a Brooktree Tv card but I cant watch tv in my linux box. xawtv does not found any channel. Does anyone know how to fix this? thanks try scantv or look for their site for a config template (~/.xawtv). -s Anyone know how to configure Xawtv to work with my modular technologies PCTV Tuner with teletext. I'm in UK we use PAL (Phase Alternating Line) LM8.1/LM8.2 sees the card a Brooktree,but that's just another name for modular technologies, or visa versa. John -- John Richard Smith [EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Quake 3...again
On Tuesday 28 May 2002 08:55 am, you wrote: snip Some CD-RW drives (eg, Plextor, Yamaha) are known to work well with even poor media. Other drives (eg, Sony, HP) are know to be more fussy. 'Bout all you can do to minimize these situations is thru trial'n error, find media that works well with your CD-RW, and never burn faster than 8x. If you still encounter problems, burn at 4x. I can testify to this...my brother burns 800 meg CD's all the time. My Plextor CD-RW will read them where my (1 year newer) Toshiba DVD drive absolutely refuses to... ;-) -- /\ DarkLord \/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] DosEmulator
On Tue, 2002-05-28 at 05:14, Chris Ames wrote: How do I access the DOD emulator? Or, for that matter, does Mandrake 8.2 even COME with one? On a happier note, I managed to get something to install! Now I get to try it again with somethingthat's actually USEFUL. I can't wait 'till I can build my dream system! Iceburgh69 If the dosemu package is installed, you can boot into dosemu with the command xdos from any term prompt. Assuming you have made no modifications to the /etc/dosemu.conf file, this will put you into the default freedos disk image, and you will then have access to a dos filesystem and prompt. The file dosemu.conf can be altered to give you access to your winblows 9x partition. You can do this by giving dosemu.conf the correct device name of your winblows partition. i.e.: (dosemu.conf excerpt) $_hdimage = /dev/hda1 # list of hdimages under /var/lib/dosemu # assigned in this order such as # hdimage_c hdimage_d hdimage_e # If the name begins with '/dev/', then partion # access is done instead of virtual hdimage such # as /dev/hda1 or /dev/hda1:ro for readonly # Currently mounted devices and swap are # refused. # Hdimages and devices may be mixed such as # hdimage_c /dev/hda1 /dev/hda3:ro # Note: 'wholedisk' is _not_ supported. __ You will not be able to access your winblows partition if it is mounted. However you can mount it from inside Linux AFTER you boot dosemu. I don't recommend that you do this until you gain some familiarity. Dosemu is not in and of itself a dos version. What it does is provide a compatible interface for any version of dos to run. What this means is that if you have a 98r2 installation, you will be booting dos version 7.10, if you tell dosemu where that 98 partition is. Linux ships a freedos version for you to play with, but this should not be confused with what dosemu actually is; it's only providing the mechanisms for freedos to function. Or M$ dos 7.10. One more item; if you boot into 98, you need to deactivate the GUI. You do this by editing the msdos.sys file. This is what mine looks like, yours is probably much shorter. Your BootGUI directive will be set to 1, you want it to be set to 0, like below: [Paths] WinDir=C:\USR\98R2 WinBootDir=C:\USR\98R2 HostWinBootDrv=C [Options] AutoScan=0 BootDelay=0 BootWarn=0 BootGUI=0 BootKeys=1 BootMenu=1 BootMenuDelay=2 BootMulti=1 DoubleBuffer=1 DblSpace=1 DrvSpace=0 LoadTop=1 Logo=0 ; ;The following lines are required for compatibility with other programs. ;Do not remove them (MSDOS.SYS needs to be 1024 bytes). ;xa ;xb ;xc ;xd ;xe ;xf ;xg ;xh ;xi ;xj ;xk ;xl ;xm ;xn ;xo ;xp ;xq ;xr ;xs DisableLog=0 WinVer=4.10. Your windir and winbootdir will say Windows instead of c:\usr\98r2. Don't worry about the other directives not being in your msdos.sys file; it's not unusual. Some of them are semi-undocumented; I've added many of them as I've gone along. They are supported, they just are not included in the default msdos.sys files. You should also set Logo to 0 as well. HTH, LX -- °°° Kernel 2.4.8-26mdk Mandrake Linux 8.1 Enlightenment 0.16.5Evolution 1.02
Re: [newbie] Quake 3...again
On Monday 27 May 2002 09:39 pm, you wrote: snip Anyone able to help? Thanks Brian Brian, I had that same signal 11 exiting problem with my version of Q3 (full commercial Linux version from Loki Software). I followed this link, d/led this file (its big, like 26-27 megs) installed it, and all was fine. (giving credit - got this from our very own Femme Fatale!) ;-) ftp://ftp.idsoftware.com/idstuff/quake3/linux/ I hope this helps! ;-) -- /\ DarkLord \/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] x config
On Tuesday 28 May 2002 18:05, daRcmaTTeR wrote: On Tue, 28 May 2002, Robin Turner wrote: On Tuesday 28 May 2002 17:19, daRcmaTTeR wrote: On Tue, 28 May 2002, Pupeno wrote: -pgpenvelope processed message I would like to remove any garbage from my x config file, where should I start to see what configuratio is actualy used by my computer ? Bye the way, I'm getting this error: INIT: ld 'x' respawning too fast: disabled for 5 minutes. Do you know what does it mean ? Thank you. -- Pupeno: [EMAIL PROTECTED] http://www.pupeno.com.ar Hi Pupeno, The error you're getting means that X isn't setup correctly on your machine. what version did you install on your machine. X and your vid card and/or the monitor aren't getting along very well. as for your X config file goes...once you've got X installed and configured correctly for your system leave that puppy alone or bad thing can and will happen. there really isn't anything to clean out or it. I got this once I think it was after a power cut resulted in file corruption (this was before I switched to a journalling filing system). Try reconfiguring X using xf86config. If that doesn't work, try reinstalling X, then reconfiguring. Sir Robin It might be a wee bit easier for him to use setuptools in a terminal then to actually try to use xf86config. I never did like that X config tool. My first experience with that monster was RedHat 5.2 5 years ago. didn't like it then and I really think it stinks now. course then, there wasn't a lot of different ways to take care of configuring X in those days. Heh heh, don't I just remember! Configuration procedure: $ xf86config $ cd /etc/X11 $ emacs XF86Config I'd not noticed setuptool before - very handy. Sir Robin -- The reason we come up with new versions is not to fix bugs. It's absolutely not. It's the stupidest reason to buy a new version I ever heard. - Bill Gates Robin Turner IDMYO, Bilkent Universitesi Ankara 06533 Turkey http://www.bilkent.edu.tr/~robin Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] x config
On Tue, 28 May 2002, Robin Turner wrote: On Tuesday 28 May 2002 18:05, daRcmaTTeR wrote: On Tue, 28 May 2002, Robin Turner wrote: On Tuesday 28 May 2002 17:19, daRcmaTTeR wrote: On Tue, 28 May 2002, Pupeno wrote: -pgpenvelope processed message I would like to remove any garbage from my x config file, where should I start to see what configuratio is actualy used by my computer ? Bye the way, I'm getting this error: INIT: ld 'x' respawning too fast: disabled for 5 minutes. Do you know what does it mean ? Thank you. -- Pupeno: [EMAIL PROTECTED] http://www.pupeno.com.ar Hi Pupeno, The error you're getting means that X isn't setup correctly on your machine. what version did you install on your machine. X and your vid card and/or the monitor aren't getting along very well. as for your X config file goes...once you've got X installed and configured correctly for your system leave that puppy alone or bad thing can and will happen. there really isn't anything to clean out or it. I got this once I think it was after a power cut resulted in file corruption (this was before I switched to a journalling filing system). Try reconfiguring X using xf86config. If that doesn't work, try reinstalling X, then reconfiguring. Sir Robin It might be a wee bit easier for him to use setuptools in a terminal then to actually try to use xf86config. I never did like that X config tool. My first experience with that monster was RedHat 5.2 5 years ago. didn't like it then and I really think it stinks now. course then, there wasn't a lot of different ways to take care of configuring X in those days. Heh heh, don't I just remember! Configuration procedure: $ xf86config $ cd /etc/X11 $ emacs XF86Config I'd not noticed setuptool before - very handy. Sir Robin man! xf86config + emacs...does _that_ ever bring back memories. scary ones at that. which is what took me to the point of finding setuptools. although in those days it wasn't called that. IN RedHat it was and is called setup. I didn't discover it to be called setuptools till I loaded Mandrake 7.0 some years back. t'was a life saver for my sanity.In those days the hardware I was running was quite generic and the support for some things wasn't what it is now. so configuring X on cheap machines was at best quite problematic. Mark Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Samba - Half there?
Derek Jennings wrote: On Monday 27 May 2002 4:58 pm, you wrote: Have you used webmin to make sure Micky is a 'normal' user and the password is set to the same as the Linux password? (Of course it is case sensitive) Yes - I checked, and I have re-entered a 'new' password, just to make sure. IPC$ is part of the Samba service. Not sure what it actually does, but it is not a valid share. It looks like you have not actually got any shares defined. Or if you do they are not browsable and so Network Neighbourhood cannot see them. This seems to be what is happening, and I can't see why. Here are settings from Webmin: Share Name PathSecurity homes All Home DirectoriesRead/write to all known users Anne_Public /mnt/win_d2/Public Read/write to all known users --- Home Directories Share Available Yes Browseable Yes Share Comment Home Directories --- Share name Anne_Public Directory to share /mnt/win_d2/Public Available Yes Browseable Yes Share Comments Anne_Public --- Edit Security for share Anne_Public Writable Yes Guest AccessNone Guest Unix user nobody Limit to possible list No Hosts to allow All Hosts to deny None Revalidate users No Valid users Andy Micky ... (I have now added them into the Possible Users list) Read/write usersAndy Micky ... For luck I addedPossible Groups users and Read/write Groups users Any ideas? Anne Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] SNF 7.2 problems.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Does anyone have any good FAQ links for the Mandrake SNF 7.2 build, other than the one on Mandrake's site? Also, I have a problem with the firewall itself. I have the firewall setup in the diagram attached. I have static routes in the init.rc startup script, because I am unable to get routed or gated to receive any RIPv1 or RIPv2 broadcasts from my Cisco 2621 routers. Every time I try to start routed with the -q or -a switch (whichever switch is for listening only), routed says it cannot bind to address. Anyway, I can access the firewall via the web management interface, and also via SSH. The problem is that my clients on any of the 192.168 networks cannot get out to the Internet. I have allowed DNS (UDP only), HTTP, HTTPS, FTP, SSH, SFTP, and SFC. Can anyone tell me what could be going on? BTW, I can get out to the Internet from the firewall by both pinging an IP address (both the Internet DNS server and the IP address of 208.208.208.208), and by running the TEST INTERNET CONNECTION from the list after logging into the console with admin. I have not installed any of the security updates, as this causes a problem when restarting the system as it hangs on bringing up the ETH2 interface. Can anyone recommend how to install the security updates/patches? Thanks, Chris PS. My apologies to the mod, as I don't have a website to upload the image (only 20kb). -BEGIN PGP SIGNATURE- Version: PGP 7.1 Comment: Public Key Signature for Chris Lynch iQA/AwUBPPPBK0r5pFJx+BQ5EQIGbgCeP85U7Hw+Gm5vH6VQs7BiAFt4OZMAn1Pi zamA7FT3yCt7qxnSJOWQb/Jc =OKqt -END PGP SIGNATURE- attachment: winmail.dat Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] SNF 7.2 problems.
On Tuesday 28 May 2002 12:41 pm, you wrote: Does anyone have any good FAQ links for the Mandrake SNF 7.2 build, other than the one on Mandrake's site? Also, I have a problem with the firewall itself. I have the firewall setup in the diagram attached. I have static routes in the init.rc startup script, because I am unable to get routed or gated to receive any RIPv1 or RIPv2 broadcasts from my Cisco 2621 routers. Every time I try to start routed with the -q or -a switch (whichever switch is for listening only), routed says it cannot bind to address. Anyway, I can access the firewall via the web management interface, and also via SSH. The problem is that my clients on any of the 192.168 networks cannot get out to the Internet. I have allowed DNS (UDP only), HTTP, HTTPS, FTP, SSH, SFTP, and SFC. Can anyone tell me what could be going on? BTW, I can get out to the Internet from the firewall by both pinging an IP address (both the Internet DNS server and the IP address of 208.208.208.208), and by running the TEST INTERNET CONNECTION from the list after logging into the console with admin. I have not installed any of the security updates, as this causes a problem when restarting the system as it hangs on bringing up the ETH2 interface. Can anyone recommend how to install the security updates/patches? Thanks, Chris PS. My apologies to the mod, as I don't have a website to upload the image (only 20kb). OOps! hit the mouse button at the wrong moment, so previous message resembles the inner workings of my brain.Have you set up the LAN so that all of the system knows what the gateway address is?. You don't mention a gateway device. Just curious and hope to help. -- Dennis M. linux user #180842 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] SNF 7.2 problems.
On Tuesday 28 May 2002 12:41 pm, you wrote: Does anyone have any good FAQ links for the Mandrake SNF 7.2 build, other than the one on Mandrake's site? Also, I have a problem with the firewall itself. I have the firewall setup in the diagram attached. I have static routes in the init.rc startup script, because I am unable to get routed or gated to receive any RIPv1 or RIPv2 broadcasts from my Cisco 2621 routers. Every time I try to start routed with the -q or -a switch (whichever switch is for listening only), routed says it cannot bind to address. Anyway, I can access the firewall via the web management interface, and also via SSH. The problem is that my clients on any of the 192.168 networks cannot get out to the Internet. I have allowed DNS (UDP only), HTTP, HTTPS, FTP, SSH, SFTP, and SFC. Can anyone tell me what could be going on? BTW, I can get out to the Internet from the firewall by both pinging an IP address (both the Internet DNS server and the IP address of 208.208.208.208), and by running the TEST INTERNET CONNECTION from the list after logging into the console with admin. I have not installed any of the security updates, as this causes a problem when restarting the system as it hangs on bringing up the ETH2 interface. Can anyone recommend how to install the security updates/patches? Thanks, Chris PS. My apologies to the mod, as I don't have a website to upload the image (only 20kb). -- Dennis M. linux user #180842 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Mandrake PPC question
Hello all, I'm considering either Mandrake 8.2 or YDL 2.2, and am hoping someone here can help with some questions. On YDL's web site, they suggest placing Linux and Mac OS 9 on separate disks, and making the drive with YDL the master on the IDE bus. Is this also recommended for Mandrake? Also, although I can access the Mac drives from Linux, is the reverse true? If I'm booted in OS 9, can I access the Linux partition(s)? Thanks much, Jeff Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mandrake PPC question
These are great basic newby questions and I'd like to know the answers too. Please keep a notebook of why you're making certain decisions as you go along and let us all read it as you go along. What mac system and hardware are you running? d Hello all, I'm considering either Mandrake 8.2 or YDL 2.2, and am hoping someone here can help with some questions. On YDL's web site, they suggest placing Linux and Mac OS 9 on separate disks, and making the drive with YDL the master on the IDE bus. Is this also recommended for Mandrake? Also, although I can access the Mac drives from Linux, is the reverse true? If I'm booted in OS 9, can I access the Linux partition(s)? Thanks much, Jeff Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Flash plugin in Konq again
On Tuesday 28 May 2002 02:04 am, Gerald Waugh opened a general hailing frequency and transmitted to all open stations: I am using KDE 2.2.1-7 It installed with my Mandrake 3 CD set. I found this URL for the rpm, but it won't download. ftp://rpmfind.net/linux/Mandrake/8.1/i586/Mandrake/RPMS//kdebase-nsplugin s-2.2.1-7mdk.i586.rpm Does anyone happen to have this RPM? And can I get it. if you have the 3 cd set the nsplugins rpm should be on your cds. if you don't see it with software manager have a look manually. it should be there. since i still have the 8.1 cds _somewhere_ here i can get it to you if you still can't find it. -- I believe OS/2 is destined to be the most important operating system of all time. -Bill Gates shane Profile at: http://dmoz.org/profiles/shen.html Proud to be a DMOZ editor since 10-98 Mandrake Users Club Member http://www.linux-mandrake.com/en/club/ Registered linux user #101606 http://counter.li.org/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Re: Mandrake PPC question
What mac system and hardware are you running? A blue/white G3 currently, but I may trade up to a G4 since my G3 has the Rev 1 IDE chip and can't support a 2nd drive on the internal IDE bus. I can't use an IDE card, because I wouldn't be able to boot from the drive connected to it. Jeff Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] SNF 7.2 problems.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Yes. The ETH interfaces are the gateways for the respected LAN segments. I do have RIPv2 running on the network and all of the routers see the other subnets. Like I said, I can SSH into the firewall from the IP Address 192.168.150.1, do what I need to do on the firewall, but I cannot get outside the firewall. Is there a script or config file you would like me to paste so you can look at it to see if there is a config problem? I haven't made any changes to any of the script files, except the init.rc (or the rc.local, which ever is the very last script to run during bootup) which I has to add the static routes to the other networks. Now, before anyone else jumps, I did add the static routes manually BEFORE I modified the init.rc script, and I was able to access the firewall via HTTPS and SSH, but I was still not able to get out to the Internet. Thanks, Chris - -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Dennis Myers Sent: Tuesday, May 28, 2002 12:12 PM To: [EMAIL PROTECTED] Subject: Re: [newbie] SNF 7.2 problems. On Tuesday 28 May 2002 12:41 pm, you wrote: Does anyone have any good FAQ links for the Mandrake SNF 7.2 build, other than the one on Mandrake's site? Also, I have a problem with the firewall itself. I have the firewall setup in the diagram attached. I have static routes in the init.rc startup script, because I am unable to get routed or gated to receive any RIPv1 or RIPv2 broadcasts from my Cisco 2621 routers. Every time I try to start routed with the -q or -a switch (whichever switch is for listening only), routed says it cannot bind to address. Anyway, I can access the firewall via the web management interface, and also via SSH. The problem is that my clients on any of the 192.168 networks cannot get out to the Internet. I have allowed DNS (UDP only), HTTP, HTTPS, FTP, SSH, SFTP, and SFC. Can anyone tell me what could be going on? BTW, I can get out to the Internet from the firewall by both pinging an IP address (both the Internet DNS server and the IP address of 208.208.208.208), and by running the TEST INTERNET CONNECTION from the list after logging into the console with admin. I have not installed any of the security updates, as this causes a problem when restarting the system as it hangs on bringing up the ETH2 interface. Can anyone recommend how to install the security updates/patches? Thanks, Chris PS. My apologies to the mod, as I don't have a website to upload the image (only 20kb). OOps! hit the mouse button at the wrong moment, so previous message resembles the inner workings of my brain.Have you set up the LAN so that all of the system knows what the gateway address is?. You don't mention a gateway device. Just curious and hope to help. - -- Dennis M. linux user #180842 -BEGIN PGP SIGNATURE- Version: PGP 7.1 Comment: Public Key Signature for Chris Lynch iQA/AwUBPPPiWkr5pFJx+BQ5EQKMoQCeLa4X+wlA8nFi4FK7gI+pxAk9iNAAmwe5 I7jQALxkgs8ByaK7OjK3W9eE =OMTa -END PGP SIGNATURE- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] video card replacement/system won't boot
I've been running a dual-boot Mandrake 8.2/Windows system since 8.2 became available. Today, I had to upgrade/replace my old video card because it has gone bad (GeForce 2 with an ATI Radeon 8500.) I'm using a stock kernel and without the NVIDIA 3GL drivers installed, I do not startx at boot time. I can get to lilo and boot in to windows just fine, however, when I try to boot in to linux, linux-nonfb, or failsafe the system freezes. I've also tried reinstalling from cd#1. Any thoughts, any suggestions would be much appreciated. The Windows side boots fine and found all the new hardware. Joe Sotham - Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Re: Mandrake PPC question
I'm running Powerbook G3/400, system 9.2.2 with 128 meg ram and 6 gig internal. I have a backup of 20 gig on the firewire. I can add another firewire drive but want to avoid that expense if possible. My objectives for going to Linux are: 1) It's open source. 2) It's more robust; 3) It is more flexible in what can be customized. 4) It runs SPlus and a number of other good stat routines that were developed for Unix. I want to keep my appleworks 5 wordprocessor, my OE email, and my IE and Opera browsers, or have at least good equivalents. Right now have narrowed down choices to YDL, Mandrake, and SuSE. I'm not leaning toward any of them right now, it is too early. So, anything you post regarding your choice strategy and thinking along the way would be helpful to me. The same goes for any others who have been down this path already. TYIA, d What mac system and hardware are you running? A blue/white G3 currently, but I may trade up to a G4 since my G3 has the Rev 1 IDE chip and can't support a 2nd drive on the internal IDE bus. I can't use an IDE card, because I wouldn't be able to boot from the drive connected to it. Jeff Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] video card replacement/system won't boot
On Tue, 28 May 2002 13:07:05 -0700 Joe Sotham [EMAIL PROTECTED] wrote: I've been running a dual-boot Mandrake 8.2/Windows system since 8.2 became available. Today, I had to upgrade/replace my old video card because it has gone bad (GeForce 2 with an ATI Radeon 8500.) I'm using a stock kernel and without the NVIDIA 3GL drivers installed, I do not startx at boot time. I can get to lilo and boot in to windows just fine, however, when I try to boot in to linux, linux-nonfb, or failsafe the system freezes. I've also tried reinstalling from cd#1. I have made note of this before. The Radeon 8500 Is Not supported in 8.2. You can run the installation in text mode and then try dling and installing the ati2 drivers from gatos and you may be able to get some usability in X. The drivers themselves are very buggy as relates to the 8500 and you will suffer lock-ups and crashes. This is why support for the 8500 was disabled in 8.2 Charles Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Flash plugin in Konq again
On Tue, 2002-05-28 at 17:44, shane wrote: On Tuesday 28 May 2002 02:04 am, Gerald Waugh opened a general hailing frequency and transmitted to all open stations: I am using KDE 2.2.1-7 It installed with my Mandrake 3 CD set. I found this URL for the rpm, but it won't download. ftp://rpmfind.net/linux/Mandrake/8.1/i586/Mandrake/RPMS//kdebase-nsplugin s-2.2.1-7mdk.i586.rpm Does anyone happen to have this RPM? And can I get it. if you have the 3 cd set the nsplugins rpm should be on your cds. if you don't see it with software manager have a look manually. it should be there. since i still have the 8.1 cds _somewhere_ here i can get it to you if you still can't find it. Try ftp://sunsite.bcc.bilkent.edu.tr/pub/linux/mandrake/8.1/i586/Mandrake/RPMS If that doesn't work you can also use http. Sir Robin Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] SNF 7.2 problems.
boy I don't know if stuff has changed or what, but used to be SINGLE Network firewall mean only one lan and one external interface no wonder you have a problem with SINGLE NETWORK on MULTIpul eth interfaces... have you ever considered useing only eth0 for the inside lan as the gateway (192.168.0.1) and eth1 as the (dhcp?) outside lan? and maybe consder a complete distro custom setup as a firewall machine to get all these other ETH2, ETH3, ppp0,ppp1,ppp2, running at the same time? On Tuesday 28 May 2002 04:02 pm, you wrote: Yes. The ETH interfaces are the gateways for the respected LAN segments. I do have RIPv2 running on the network and all of the routers see the other subnets. Like I said, I can SSH into the firewall from the IP Address 192.168.150.1, do what I need to do on the firewall, but I cannot get outside the firewall. Is there a script or config file you would like me to paste so you can look at it to see if there is a config problem? I haven't made any changes to any of the script files, except the init.rc (or the rc.local, which ever is the very last script to run during bootup) which I has to add the static routes to the other networks. Now, before anyone else jumps, I did add the static routes manually BEFORE I modified the init.rc script, and I was able to access the firewall via HTTPS and SSH, but I was still not able to get out to the Internet. Thanks, Chris -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Dennis Myers Sent: Tuesday, May 28, 2002 12:12 PM To: [EMAIL PROTECTED] Subject: Re: [newbie] SNF 7.2 problems. On Tuesday 28 May 2002 12:41 pm, you wrote: Does anyone have any good FAQ links for the Mandrake SNF 7.2 build, other than the one on Mandrake's site? Also, I have a problem with the firewall itself. I have the firewall setup in the diagram attached. I have static routes in the init.rc startup script, because I am unable to get routed or gated to receive any RIPv1 or RIPv2 broadcasts from my Cisco 2621 routers. Every time I try to start routed with the -q or -a switch (whichever switch is for listening only), routed says it cannot bind to address. Anyway, I can access the firewall via the web management interface, and also via SSH. The problem is that my clients on any of the 192.168 networks cannot get out to the Internet. I have allowed DNS (UDP only), HTTP, HTTPS, FTP, SSH, SFTP, and SFC. Can anyone tell me what could be going on? BTW, I can get out to the Internet from the firewall by both pinging an IP address (both the Internet DNS server and the IP address of 208.208.208.208), and by running the TEST INTERNET CONNECTION from the list after logging into the console with admin. I have not installed any of the security updates, as this causes a problem when restarting the system as it hangs on bringing up the ETH2 interface. Can anyone recommend how to install the security updates/patches? Thanks, Chris PS. My apologies to the mod, as I don't have a website to upload the image (only 20kb). OOps! hit the mouse button at the wrong moment, so previous message resembles the inner workings of my brain.Have you set up the LAN so that all of the system knows what the gateway address is?. You don't mention a gateway device. Just curious and hope to help. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Bad floppy filecopy under KDE?
Just wondering - seems like I read this somewhere before...is there a bug in the drag 'n drop filecopy to an open floppy window under KDE with v8.2? The reason I'm asking is - I did it, from an window on /home/darklord to an open window on /mnt/floppy and I got a complete and total system wide lockup. None of the usual control alt's would work, had to power down and backup. Of course, then I went thru the time-honored I'm fsck'ed shuck 'n jive... I opened a term and did a cp filename.ext /mnt/floppy and it worked just fine. Thanks in advance! ;-) -- /\ DarkLord \/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] video card replacement/system won't boot
May 28, 2002 02:07 pm,Joe Sotham wrote: I've been running a dual-boot Mandrake 8.2/Windows system since 8.2 became available. Today, I had to upgrade/replace my old video card because it has gone bad (GeForce 2 with an ATI Radeon 8500.) I'm using a stock kernel and without the NVIDIA 3GL drivers installed, I do not startx at boot time. I can get to lilo and boot in to windows just fine, however, when I try to boot in to linux, linux-nonfb, or failsafe the system freezes. I've also tried reinstalling from cd#1. Any thoughts, any suggestions would be much appreciated. The Windows side boots fine and found all the new hardware. Joe Sotham - ~~ All I know about who/what/when and if regarding Linux driver development for ATI products is from this ATI page: http://www.ati.com/developer/linux.html I hope you can find something there that will help you since the links to supported developers pages are there. I often 'march to a different beat' myself, so I can understand buying a graphics card from someone other than NVidia, but I don't think I would have bought an ATI (even though they're a Canajun company, eh. ;-)) until the driver projects have had a bit more time to gel. -- Charlie Edmonton,AB,Canada Registered user 244963 at http://counter.li.org A definition of teaching: casting fake pearls before real swine. -- Bill Cain, Stand Up Tragedy Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] video card replacement/system won't boot
On Tuesday 28 May 2002 23:44, you wrote: I've been running a dual-boot Mandrake 8.2/Windows system since 8.2 became available. Today, I had to upgrade/replace my old video card because it has gone bad Just for curiosity: How do you recognize a video card going bad? Lines on the screen, blank (black) screens every now and then or the monitor screetching at a high pitch? Don't bother about the flames coming out of the rear end of the monitor..been there! :o( Good hunting, Harm. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] [Fwd: could i ask you to resend this to the newbie-list?]
Anuerin G. Diaz wrote: hi femme, again i would like to ask for your help. i already posted this to the local LUG but have not received any reply for the past two days and i sort of need this while i have the free time. thanks... = to the list members, this is the post that i sent to the Philippine LUG and have not received any response which means either the experienced users are not yet in or they think this is to simple to be solved by RTFM. unfortunately i dont know much about MTAs. i know this is RH specific but this is what i have to work on and i have to do this in order to start my little 'open source/information-technology awareness campaign' and start pushing GNU/Linux (especially Mandrake) to some of my '{un|mis}informed' colleagues. i will be grateful to any replies that will come my way and ,if i do have some questions, i may have to ask you directly because of my problems with posting to the list. thank you very much! = since i had no reply from my post yesterday about relaying mail to a redhat server, i delved into the Mail-Administrator how-to but still cant figure out some things. here is the scenario [SCENARIO] we have a Exchange server here at the office named exchange.msi.net.ph which handles all of our mailing needs (except that it has no reverse-lookup capabilities). i am setting up a local mailing list on a RedHat 7.2 server (named here as gateway) with sendmail-8.11.6-3. i have set-up Mailman with relative success. i can send mail to the employees using the exchange server by using the commandline mail utility. Mailman could also send notifications even to outside accounts. what i cannot do is to have the redhat server receive mails for [user]@gateway.msi.net.ph. i tried sending a mail to [EMAIL PROTECTED] with testuser set in the /etc/aliases file as testuser:[EMAIL PROTECTED] but the mail bounces back with exchange saying that the user is not recognized. [quote] Your message To: [EMAIL PROTECTED] Subject: test Sent:Tue, 28 May 2002 10:19:05 +0800 did not reach the following recipient(s): [EMAIL PROTECTED] on Tue, 28 May 2002 10:20:35 +0800 The recipient name is not recognized snipped server specific ids Unknown Recipient [/quote] now i dont know whats wrong but my theory is that either 1) the exchange is not relaying the mail to the gateway server (but i can access http://gateway.msi.net.ph without difficulty so that rules out name resolution). or 2) i dont have a receiving application on the RH server's end. can you suggest any steps that i have not taken? = ciao! -- Programming, an artform that fights back. = Anuerin G. Diaz Design Engineer Millennium Software, Incorporated 2305 B West Tower, Philippines Stocks Exchange Center, Exchange Road, Ortigas Center, Pasig City Tel# 637-4634 loc. 75 Fax# 637-4679 = -- Femme Good Decisions You boss Made: We'll do as you suggest and go with Linux. I've always liked that character from Peanuts. - Source: Dilbert Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Samba - Half there?
On Tuesday 28 May 2002 5:40 pm, Anne Wilson wrote: Derek Jennings wrote: On Monday 27 May 2002 4:58 pm, you wrote: Have you used webmin to make sure Micky is a 'normal' user and the password is set to the same as the Linux password? (Of course it is case sensitive) Yes - I checked, and I have re-entered a 'new' password, just to make sure. IPC$ is part of the Samba service. Not sure what it actually does, but it is not a valid share. It looks like you have not actually got any shares defined. Or if you do they are not browsable and so Network Neighbourhood cannot see them. This seems to be what is happening, and I can't see why. Here are settings from Webmin: Share NamePathSecurity homes All Home DirectoriesRead/write to all known users Anne_Public /mnt/win_d2/Public Read/write to all known users --- Home Directories Share Available Yes Browseable Yes Share Comment Home Directories --- Share nameAnne_Public Directory to share/mnt/win_d2/Public Available Yes Browseable Yes Share CommentsAnne_Public --- Edit Security for share Anne_Public Writable Yes Guest Access None Guest Unix user nobody Limit to possible listNo Hosts to allowAll Hosts to deny None Revalidate users No Valid users Andy Micky ... (I have now added them into the Possible Users list) Read/write usersAndy Micky ... For luck I added Possible Groups users and Read/write Groups users Any ideas? Anne Hmm... Looks OK just like mine... Here is my /etc/samba/smb.conf file for you to compare. I know you said you have no firewall installed, but are you running one on your Windows computer? With Zone Alarm for example you have to put the Linux computer in the 'trusted' zone before you can network to it. Try 'pinging' from each computer to the other. HTH derek #=== Global Settings = [global] smb passwd file = /etc/samba/smbpasswd printing = cups dns proxy = no security = user encrypt passwords = yes workgroup = WORKGROUP server string = Samba Server %v socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 log file = /var/log/samba/log.%m load printers = yes max log size = 50 [homes] writable = yes comment = Home Directories [printers] comment = All Printers path = /var/spool/samba browseable = no # to allow user 'guest account' to print. guest ok = yes writable = no printable = yes create mode = 0700 # = # print command: see above for details. # = print command = lpr-cups -P %p -o raw %s -r # using client side printer drivers. [print$] path = /var/lib/samba/printers browseable = yes read only = yes write list = adm root [Windows] path = /mnt/windows Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: Re: [newbie] Tv Card
mobo= MOtherBOard, chipset is the chip used as controllers on the MoBo, ALi Is Acer labs, Via is VIA technoldeges, Intel you know, Brooktree is the chipset (and drivers) for the Video card. On Tuesday 28 May 2002 09:37 am, you wrote: Yes, it works under windows. what is Mobo? I think brooktree is the Chipset, and is a pci tv card. You Wrote: -- nope no need to mount anything. do you dual boot? does it work under windows? what Mobo and chipset do you have (known problems with Ali and via chipsets, and pci tv cards) On Monday 27 May 2002 10:57 pm, you wrote: I have already changed this settings but Im unable to watch tv. Do I have to mount this divice? Any ideas? You Wrote: -- left click on the picture box, and turn off overlay, and turn on ntsc (not pal) edit channels to suit you, save and close, this assumes the USA (bellsouth.net). On Monday 27 May 2002 04:15 pm, you wrote: On Monday 27 May 2002 10:55 am, Misael M. wrote: I have a Brooktree Tv card but I cant watch tv in my linux box. xawtv does not found any channel. Does anyone know how to fix this? thanks try scantv or look for their site for a config template (~/.xawtv). -s ___ ___ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Latest Nvidia drivers
Derek Jennings wrote: On Tuesday 28 May 2002 4:18 pm, Tim Ford wrote: I just downloaded and installed the latest nvidia drivers, but im still having problems loading up glx on my computer. Anyone had any similar problems with nvidia drivers? A few thoughts for you to check out:- Look in /usr/X11R6/lib/modules/extensions if you have a file called libGLcore.a then rename it or else GLX will not load correctly. I assume you have edited /etc/X11/XF86Config-4 correctly ? InsertLoad glx in the Modules section EditDriver nvidia in the Graphics section You do have Xfree 4.x enabled do you? Xfree3.x is not going to work. Try running glxinfo in a terminal. If you get pages of output then glx is working. Look in /var/log/XFree86.0.log for errors when loading X post the errors here if you do not understand what they mean. HTH derek Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com I had previously put in load glx' into that config file, but hadn't changed the driver name. One other thing i noticed that in my extension i don't have a libglcore at all, but i do have a libglx.so What puzzles me is that it has the extension .so which makes it a executable binary, instead of being an archive (.a). is that correct and am i wrong? and when running glxinfo - xlib: extension glx missing on display :0.0 comes up multiple times. anyway, im restarting x, and hoping for the best. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Re: video card replacement/system won't boot
Charlie writes: May 28, 2002 02:07 pm,Joe Sotham wrote: I've been running a dual-boot Mandrake 8.2/Windows system since 8.2 became available. Today, I had to upgrade/replace my old video card because it has gone bad (GeForce 2 with an ATI Radeon 8500.) I'm using a stock kernel and without the NVIDIA 3GL drivers installed, I do not startx at boot time. I can get to lilo and boot in to windows just fine, however, when I try to boot in to linux, linux-nonfb, or failsafe the system freezes. I've also tried reinstalling from cd#1. Any thoughts, any suggestions would be much appreciated. The Windows side boots fine and found all the new hardware. Joe Sotham - ~~ All I know about who/what/when and if regarding Linux driver development for ATI products is from this ATI page: http://www.ati.com/developer/linux.html I hope you can find something there that will help you since the links to supported developers pages are there. I often 'march to a different beat' myself, so I can understand buying a graphics card from someone other than NVidia, but I don't think I would have bought an ATI (even though they're a Canajun company, eh. ;-)) until the driver projects have had a bit more time to gel. -- Charlie Edmonton,AB,Canada Registered user 244963 at http://counter.li.org A definition of teaching: casting fake pearls before real swine. -- Bill Cain, Stand Up Tragedy Truth is I wasn't even paying attention to what hardware is supported... Joe Sotham - Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Sound Card Configuration
On Tue, 28 May 2002, Spyros Spyropoulos wrote: Hi, How do I configure my soundcard on Mandrake 8.0 ? Thnx, spyross hmmm...lets see if I can remember that far back. I haven't seen 8.0 for a few years, so if I get this wrong, please someone correct me. at any rate Spyros, you can do this one of two ways. (1) open a terinal window and use the setuptools utility. when you activate this utility it will either initialize the X gui or will run in the terminal itself. on the menu you're presented with there will be a menu item that will allow you to configure your sound card. it's a small wizard that is simple and straight forward. (2) open Mandrake Control Center, and go to the Hardware item shown on the left of the main panel, click on Hardware, then expand the sound card item in the list; you will see a sound card in the right pane as long as Mandrake picked up the card upon installation. you should also see the card listed as a sub-item in the left pane. click on the sound card in the left pane and hit the configure button in the right pane. a list of drivers will be presented to you with it defaulting to what yours should be. hit the OK button and listen for the audio clip to be played. if you here it click the yes button and you're done. if you didn't hear it and you're sure that you chose the correct driver for your card turn up the volume on your speakers and repeat the last procedure. IF you still don't hear the audio clip then it's likely you have a bit more configuring to do to get your sound working. Mark Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Flash plugin in Konq again
On Tuesday 28 May 2002 04:30 pm, Robin wrote: On Tue, 2002-05-28 at 17:44, shane wrote: On Tuesday 28 May 2002 02:04 am, Gerald Waugh opened a general hailing frequency and transmitted to all open stations: I am using KDE 2.2.1-7 It installed with my Mandrake 3 CD set. I found this URL for the rpm, but it won't download. ftp://rpmfind.net/linux/Mandrake/8.1/i586/Mandrake/RPMS//kdebase-nsplug in s-2.2.1-7mdk.i586.rpm Does anyone happen to have this RPM? And can I get it. if you have the 3 cd set the nsplugins rpm should be on your cds. if you don't see it with software manager have a look manually. it should be there. since i still have the 8.1 cds _somewhere_ here i can get it to you if you still can't find it. Try ftp://sunsite.bcc.bilkent.edu.tr/pub/linux/mandrake/8.1/i586/Mandrake/RPMS If that doesn't work you can also use http. Thank you Sir Robin and it works -- Gerald Waugh http://www.frontstreetnetworks.com :: Phone. [011] 203.785.0699 Front Street Networks LLC | SOHO Networks Web Site Hosting 229 Front Street, Ste. #C, New Haven, CT, 06513-3203 United States Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] accesss shareing
- Original Message - From: Brian Parish [EMAIL PROTECTED] To: newbie [EMAIL PROTECTED] Sent: Tuesday, May 28, 2002 6:47 PM Subject: Re: [newbie] accesss shareing On Wed, 2002-05-29 at 13:13, [EMAIL PROTECTED] wrote: I was trying to share my cable connection in win2000 sstem(which turns out I lost my help files acouple of week,s ago) with mandrake 8.2.I installed to 2 card in the 2000 system went thur the auto shareing dos promting the system I got the card ad DNS nothing IP address 192.168.01 sub mast 255.255.255.0 gateway nothing running auto config in linux I got gateway 192.168.01 ip address 192.168.01 netmask 255.255.255.0 protocol DHCP start on boot yes I know there is are thing wrong here because it does seem to work but as I said I,m missing my help files.Can anyone see what needs changeing. Well the ip addresses you list here are not valid, but I assume that's a typo and they are really 192.168.0.1 That would be your problem as your linux box IP and your W2k IP are the same. There is no need for DHCP to make this work, and it's probably more reliable to use a static address. Just set the the IP address on linux to be 192.168.0.2 subnet 255.255.255.0 gateway 192.168.0.1 Under DNS server, list the primary DNS of your cable provider. If it doesn't work then, check: /etc/resolv.conf Should look like this: search domain.of.your.provider nameserver primary.dns.ip.addr You can put the secondary address in there too just by adding another line: search domain.of.your.provider nameserver primary.dns.ip.addr nameserver secondary.dns.ip.addr You'll need to be root to edit /etc/resolv.conf HTH Brian Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] accesss shareing
Thank,s Brain,I made the changes still no contection I haven,t got much time in with linux GREEN-GREEN and you lost me on checking with the /ect/resolv.config didn,t understand were to do it. - Original Message - From: Brian Parish [EMAIL PROTECTED] To: newbie [EMAIL PROTECTED] Sent: Tuesday, May 28, 2002 6:47 PM Subject: Re: [newbie] accesss shareing On Wed, 2002-05-29 at 13:13, [EMAIL PROTECTED] wrote: I was trying to share my cable connection in win2000 sstem(which turns out I lost my help files acouple of week,s ago) with mandrake 8.2.I installed to 2 card in the 2000 system went thur the auto shareing dos promting the system I got the card ad DNS nothing IP address 192.168.01 sub mast 255.255.255.0 gateway nothing running auto config in linux I got gateway 192.168.01 ip address 192.168.01 netmask 255.255.255.0 protocol DHCP start on boot yes I know there is are thing wrong here because it does seem to work but as I said I,m missing my help files.Can anyone see what needs changeing. Well the ip addresses you list here are not valid, but I assume that's a typo and they are really 192.168.0.1 That would be your problem as your linux box IP and your W2k IP are the same. There is no need for DHCP to make this work, and it's probably more reliable to use a static address. Just set the the IP address on linux to be 192.168.0.2 subnet 255.255.255.0 gateway 192.168.0.1 Under DNS server, list the primary DNS of your cable provider. If it doesn't work then, check: /etc/resolv.conf Should look like this: search domain.of.your.provider nameserver primary.dns.ip.addr You can put the secondary address in there too just by adding another line: search domain.of.your.provider nameserver primary.dns.ip.addr nameserver secondary.dns.ip.addr You'll need to be root to edit /etc/resolv.conf HTH Brian Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] subscription
On Tuesday 28 May 2002 07:22 pm, et opened a general hailing frequency and transmitted to all open stations: On Monday 27 May 2002 11:31 pm, you wrote: On Monday 27 May 2002 07:07 pm, alex opened a general hailing frequency and transmitted to all open stations: one hell of an attachment mess why did you do that to us? and what is it? my bet spam-a-rama through IncrediMail 2001 and savy2k.net ... probly collecting address that reply i hope so, as i add them to my forward to FTC filter. i figure if they get enough of my spam they will feel my pain. :) -- There are two kinds of security problems. The first kind arises where people are too stupid for words. Outlook is a petri dish. I don't know why anyone uses it. -- James Gosling, lead engineer and architect of Java at Sun Microsystems shane Profile at: http://dmoz.org/profiles/shen.html Proud to be a DMOZ editor since 10-98 Mandrake Users Club Member http://www.linux-mandrake.com/en/club/ Registered linux user #101606 http://counter.li.org/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] accesss shareing
On Wed, 2002-05-29 at 15:02, [EMAIL PROTECTED] wrote: Thank,s Brain,I made the changes still no contection I haven,t got much time in with linux GREEN-GREEN and you lost me on checking with the /ect/resolv.config didn,t understand were to do it. From a console, type: cat /etc/resolv.conf This will show you what's in there (maybe not much). If you need to add the nameservers manually, try: su password for root kwrite /etc/resolv.conf or use another editor of your choice. Come back if it's still not clear. Brian Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Sound - one door opens...
I now have alsa 0.9.rc1 under 8.2 playing nicely with my Delta 66 multi-channel card and XMMS is doing it's thing faultlessly for 16 hours or so per day. BUT This seems to have been at the cost of tuxracer, chromium and probably other apps that use 3d acceleration. These worked albeit without sound, before alsa rc1, but now sit on the panel for a while then give up. This happens whether another app is using sound at the time or not. I've tried both with the aRts server on and off. XMMS works thru either aRts or OSS emulation, but not the 3d stuff. Lighter weight games such as tuxpuck work fine (with sound). Any ideas? TIA Brian Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] plz help - 8.2 and wine install problem
When I try installing wine from an rpm, I get the following error: installing binary packages file /usr/bin/expand from install of wine-cvs-unstripped-052802-1 conflicts with file from package textutils-2.0.17-7mdk. As a result, wine will not install. I am running Mandrake 8.2 download edition and the rpm that I downloaded was the right one for Mandrake. Any help with this problem would be appreciated. Thanks, Mike Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] plz help - 8.2 and wine install problem
mike wrote: When I try installing wine from an rpm, I get the following error: installing binary packages file /usr/bin/expand from install of wine-cvs-unstripped-052802-1 conflicts with file from package textutils-2.0.17-7mdk. As a result, wine will not install. I am running Mandrake 8.2 download edition and the rpm that I downloaded was the right one for Mandrake. Any help with this problem would be appreciated. have you tried the latest codeweavers wine? I have used their versions for sometime with great success even in 8.2 Mike also Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] accesss shareing
I quess this is what it should do but most everthing else ask for root but konsole,choose root console and does nothing ,logout and login as root screen turn,s red then warning about this is a bad ideal.I stop and got out there to unsure. - Original Message - From: Brian Parish [EMAIL PROTECTED] To: newbie [EMAIL PROTECTED] Sent: Tuesday, May 28, 2002 8:08 PM Subject: Re: [newbie] accesss shareing On Wed, 2002-05-29 at 15:02, [EMAIL PROTECTED] wrote: Thank,s Brain,I made the changes still no contection I haven,t got much time in with linux GREEN-GREEN and you lost me on checking with the /ect/resolv.config didn,t understand were to do it. From a console, type: cat /etc/resolv.conf This will show you what's in there (maybe not much). If you need to add the nameservers manually, try: su password for root kwrite /etc/resolv.conf or use another editor of your choice. Come back if it's still not clear. Brian Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mandrake PPC question
From a reliable source: On Tue, 2002-05-28 at 15:15, [EMAIL PROTECTED] wrote: Hello all, I'm considering either Mandrake 8.2 or YDL 2.2, and am hoping someone here can help with some questions. On YDL's web site, they suggest placing Linux and Mac OS 9 on separate disks, and making the drive with YDL the master on the IDE bus. Is this also recommended for Mandrake? This is no longer a requirement for either Yellow Dog or Mandrake. Also, although I can access the Mac drives from Linux, is the reverse true? If I'm booted in OS 9, can I access the Linux partition(s)? I don't believe mac os can see GNU/Linux partitions, and GNU/Linux can view HFS partitions and HFS+ partition support I believe is still experimental. YMMV Thanks much, Jeff Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com