Re: Rock and Roll Trivia - WAS: Youngest CCNP
It's a Dylan song; the Turtles did it, yes about '66-'67..not that I was there or anything Dan Henry CCNA, CCDA ZoomTown.Com/Broadwing, Inc. whatshakin wrote: > Maybe I'm wrong but I seem to hear John Fogerty for some reason. > > - Original Message - > From: Chuck Larrieu <[EMAIL PROTECTED]> > To: whatshakin <[EMAIL PROTECTED]> > Sent: Sunday, November 12, 2000 11:38 PM > Subject: RE: Rock and Roll Trivia - WAS: Youngest CCNP > > > Funny thing is I thought I knew, but now I'm kinda wondering. > > > > I do believe this predates Credence though. I was thinking Turtles, from > 67 > > or so. But I keep having flashes of Bob Dylan, and then of Roger McGuin of > > the Byrds. > > > > As you can tell, I am on the verge of senility :-> proving I am definitely > > NOT the youngest CCNP ;-> > > > > Chuck > > > > -Original Message- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of > > whatshakin > > Sent: Sunday, November 12, 2000 11:23 PM > > To: [EMAIL PROTECTED] > > Subject: Re: Rock and Roll Trivia - WAS: Youngest CCNP > > > > Creedence! > > > > - Original Message - > > From: Chuck Larrieu <[EMAIL PROTECTED]> > > Newsgroups: groupstudy.cisco > > To: <[EMAIL PROTECTED]> > > Sent: Sunday, November 12, 2000 10:50 PM > > Subject: Rock and Roll Trivia - WAS: Youngest CCNP > > > > > > > to quote a great rock band from the distant past > > > > > > it ain't me, babe! > > > no! no! no! it ain't me babe! > > > it ain't me you're looking for! > > > > > > now name that band! :-> > > > > > > "Peter I. Slow" <[EMAIL PROTECTED]> wrote in message > > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > > Does anyone have any idea about the age of the youngest CCNP? I was > just > > > wondering > > > > > > > > _ > > > > FAQ, list archives, and subscription info: > > > http://www.groupstudy.com/list/cisco.html > > > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > > > > > > > > > > _ > > > FAQ, list archives, and subscription info: > > http://www.groupstudy.com/list/cisco.html > > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > > > > _ > > FAQ, list archives, and subscription info: > > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
configure router thru aux port
hello friends, I need to configure router (2501) thru aux port...I need its configuration..can anybdy help me.. ALI SHEERAZ _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Summarization
Te summary route would be 128.213.64.0 255.255.224.0 64: 010 0 95: 010 1 - 224: 111 0 ALI SHEERAZ >From: "archstein" <[EMAIL PROTECTED]> >Reply-To: "archstein" <[EMAIL PROTECTED]> >To: <[EMAIL PROTECTED]> >Subject: Summarization >Date: Tue, 14 Nov 2000 11:27:56 +0700 > > >Hi groups... > >Can you help me please ? What is summary address for subnet 128.213.64.0 >- 128.213.95.0 ? >Is that right if the summary address is 128.213.64.0 255.255.192.0 >To determine ther sumary route, the router looks for the most highest-order >number of bits that match. >If there is no match bits, how to summarize ??? >Thanks > _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE Written Question ?
Did the CCIE Written Question asking for the Cisco Command Line Interface (CLI) as i found on the CCNP exam track ? Regards, SBS CCNP,CCDP R&S
Dialer profile question
What is the primary part of a dialer profile? dialer interface physical interface map class dialer pool _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Summarization
before the flames start, let me correct myself :) On Mon, 13 Nov 2000, Brian wrote: > On Tue, 14 Nov 2000, archstein wrote: > > > > > Hi groups... > > > > Can you help me please ? What is summary address for subnet 128.213.64.0 - >128.213.95.0 ? > > 128.213.64.0/27 would summarize that range. > 129.213.64.0/19 > > Is that right if the summary address is 128.213.64.0 255.255.192.0 > > thats 128.213.64.0/26, and it summarizes 128.213.64.0 - 128.213.127.255 128.213.64.0/18 I have this bad habit of thinking in the ranges of /32-/24.working for an ISP, thats what I am constantly allocating. When I see "64-96"./27 instantly pops into my head, and then I post haphazardly.disregard my ramblings late into the night...after 10pm I am so burnt out from sitting in front of routers, I am not good and start to break down :). Brian > > > To determine ther sumary route, the router looks for the most highest-order number >of bits that match. > > If there is no match bits, how to summarize ??? > > well, sometimes you can't. > > Brian > > > > Thanks > > > > > > --- > Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] > Network Administrator > ShreveNet Inc. (ASN 11881) > > --- Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Summarization
I think the subnet mask should be 255.255.224.0 126.213.64.0 = 0100 128.213.95.0 = 0101 subnetmask = 1110 = 224 raymond. -Original Message-From: Chuck Larrieu [mailto:[EMAIL PROTECTED]]Sent: 14 Nopember 2000 13:11To: archstein; [EMAIL PROTECTED]Subject: RE: Summarization 126.213.64.0 = 0100 .0 126.213.95.0 = 0111 .0 subnet mask = 1100 .0 = ? do you see it? the summarization boundary occurs at the last point to the left where all bits in both rows are the same. in your example, that is at the point between the 64 and the 32 position. or at the 64 position, to be precise. I'm not sure I understand the second part of your question. Routers don't necessarily summarize on their own. they work only with what they are given via the configurations you enter. Every ip address has a host portion and a network portion. the network portion is determined by the mask you apply. network determination is made through a simple ( to a computer ) boolean XOR operation. the computer could care less where the network bits begin and end. Chuck -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of archsteinSent: Monday, November 13, 2000 8:28 PMTo: [EMAIL PROTECTED]Subject: Summarization Hi groups... Can you help me please ? What is summary address for subnet 128.213.64.0 - 128.213.95.0 ? Is that right if the summary address is 128.213.64.0 255.255.192.0 To determine ther sumary route, the router looks for the most highest-order number of bits that match. If there is no match bits, how to summarize ??? Thanks
PPP call back question
What does PPP callback accomplish? (Select all correct answers) Security Cost-saving Control access _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Traffic Director with LanProbe.
It must be a Traffic Director problem because I have the same problem using 5.8a with a Catalyst 3548 and the 2924 switches. I did notice that this was not the case in v5.7 or before. When I tried to install the agents it had an error communicating. When I test the agent it comes back fine and it even learns the ports when I configure a new unit. The message that you listed is what I get on the interfaces that I can still get polling on and the ones that do not work. "Ryan Ngai Hon Kong" <[EMAIL PROTECTED]> wrote in message 4176F37FBF9DD411B38700306E0114540F2A4E@JOSEXCHG">news:4176F37FBF9DD411B38700306E0114540F2A4E@JOSEXCHG... > Hi, > > Does anyone have experience configuring the HP LanProbe III (RMON 1) with > Traffic director 8.1? > I had install the lanprobe with an IP and as an agent. When I test the > probe, it returns > the following string. > > General info: > IP Address: 10.1.5.106 > Ping: Not supported > Read Community: "public" OK > Write Community: "public" OK > > SNMPv1 Protocol: Supported > Protocol Monitoring: Disabled or Not Supported > Application Monitoring: Disabled or Not Supported > High-Capacity Monitoring: Disabled or Not Supported > Application Response time: Disabled or Not Supported > Resource Monitoring: Disabled or Not Supported > > Interface info: > Interface Number: 1 > Description: HP LP-III Intel 82596 > Interface type: ethernet csmacd (6) > Physical Address: xx-xx-xx-xx-xx-xx > Number of Interface: 2 > Net Speed: 10 Mbit/sec > > > What I observe from this string is that I will not be able to perform > traffic monitoring > or even segment zoom into the lan probe because it says "Error Accessing > Agent Rmon-agent1(10M)! While > retrieving ETSTATS. Error: Entry or Group not present in Agent". The group > of agent and the agent itself > is configured properly. Even with the new HP LanProbe (RMON 2) doesn't help > either. > > > Please advice. > Thanks. > Ryan > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/ cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Summarization
On Tue, 14 Nov 2000, archstein wrote: > > Hi groups... > > Can you help me please ? What is summary address for subnet 128.213.64.0 - >128.213.95.0 ? 128.213.64.0/27 would summarize that range. > Is that right if the summary address is 128.213.64.0 255.255.192.0 thats 128.213.64.0/26, and it summarizes 128.213.64.0 - 128.213.127.255 > To determine ther sumary route, the router looks for the most highest-order number >of bits that match. > If there is no match bits, how to summarize ??? well, sometimes you can't. Brian > Thanks > > --- Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Dial out/in with cisco router 2509
On Mon, 13 Nov 2000, John Green wrote: > cisco 2509 router has 8 async ports that can be used > to dial in or out. > > if configured for dial out, each asyn interface would > be allotted an IP address when it dials into its ISP > and establishes a PPP link. > 8 PPP links would mean 8 IP address. why would one > have such a configuration and what is its use. for dialout? Dialing out to remote sites for any number of reasons..sync a database, upload some purchase orders, download list of orders, etc. > > As far as dialling-in is concerned, most ISP use like > PortMaster (Livingstone) and it allotes an IP address > to the host dialling into it from its pre-configured > IP addresses and a PPP link is established. at one time alot used them. The entire livingston lineup was EOL'ed recently by lucent. > hence in such a scenario where would one install a > 2509 router ? or am i missing something here... > thanks 2509 can function like a livingston just fine. Hang some modems off it, use it for dialup internet access. Alot of ISP's did just that prior to moving onto 5[1-8]00's. Brian > john > > > > __ > Do You Yahoo!? > Yahoo! Calendar - Get organized for the holidays! > http://calendar.yahoo.com/ > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCPrep.Com
It was very useful for passing the written exam...not too sure about the lab stuff though. The jury is still out so to speak. The labs seem very basic to me...if I had it to do over again I would only go with the written stuff from them. Frank John Huston wrote: > > Has anyone used CCPrep.com and if so what is your opinion of their services? > > John Huston > [EMAIL PROTECTED] > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Subject: Default Ping Payload
Interesting. It would appear that someone at Cisco had a better sense of humor than did someone at WinToys :-> -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Paul Werner Sent: Monday, November 13, 2000 6:46 PM To: [EMAIL PROTECTED] Subject:Re: Subject: Default Ping Payload > When conducting ping tests from one of our remote routers, I get anywhere from 5-13% packet loss when using the default ping payload, yet when I change the payload to anything else-such as all ones, all zeroes, alternating ones and zeroes-I get no packet loss whatsoever. > This holds true regardless of packet size. However, when using the default data pattern, larger packets get dropped more often than smaller packets. We are seeing zero input or output errors on this interface. > > This seems VERY strange to me, but I think I'll get closer to an answer when I find out what the default pattern is. > > Do any of you know what that is? If you were going from a Cisco router to a Cisco router, it would look like this(watch wrap on all links): http://www.west-point.org/users/usma1983/40768/Chesinc/docs/CiscotoCisco.txt If you were pinging from a Winthing to a Cisco device, it might look like this: http://www.west-point.org/users/usma1983/40768/Chesinc/docs/WinthingtoCisco. txt You will note that the results vary based upon the operating system involved. For a Cisco device, the repeating pattern is the following in binary: 101010001101 Which in hex is ABCD. You can vary the pattern to any four value hex character combination that you choose. Obvious choices would be 0x or 0x or maybe 0x (equal mix of ones and zeros in the payload). Of course, you will need to be in priviledge mode to do an extended ping and ensure you choose "extended commands". HTH, Paul Werner Get your own "800" number - Free Free voicemail, fax, email, and a lot more http://www.ureach.com/reg/tag _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Lab to pass CCNP
To All, Will a 2501 and 2502 cisco routersd be good enough for the CCNP? Any suggestion. Thank you. Raheem _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: acess list question
try reversing the accesslist :).. in access lists if it matches the rule then it is processed and no more processing.. line 2 becomes line 1, and line 1 becomes line 2.. try it out :) your first line says permit all ip... which includes FTP :). Regards, Jason Baker Network Engineer MCSE, CCNA, -Original Message- From: Sisqo [mailto:[EMAIL PROTECTED]] Sent: Tuesday, November 14, 2000 2:08 PM To: [EMAIL PROTECTED] Subject: acess list question Access-list 101 permit ip any any Access-list 101 deny tcp any any eq ftp Why did the above list FAIL to prevent FTP? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCIE Written Question ?
According to the R&S blueprint, you should know: Cisco Device Operation Commands: show, debug Infrastructure: NVRAM, Flash, Memory & CPU, file system, config reg Operations: file transfers, password recovery, Simple Network Management Protocol (SNMP), accessing devices, security (passwords) The sample questions published by Cisco at http://www.cisco.com/warp/public/625/ccie/certifications/sample_routing.html are good examples of the kinds of things you will find on the test. Everything you have studied so far in your certification quest you will find of value as you strive towards your CCIE. This ain't like high school, where you took a class, took a test, and promptly forgot everything you studied, never to use it again ;-> Chuck -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of S Bambang SantosoSent: Monday, November 13, 2000 7:54 PMTo: [EMAIL PROTECTED]Subject: CCIE Written Question ? Did the CCIE Written Question asking for the Cisco Command Line Interface (CLI) as i found on the CCNP exam track ? Regards, SBS CCNP,CCDP R&S
RE: Summarization
126.213.64.0 = 0100 .0 126.213.95.0 = 0111 .0 subnet mask = 1100 .0 = ? do you see it? the summarization boundary occurs at the last point to the left where all bits in both rows are the same. in your example, that is at the point between the 64 and the 32 position. or at the 64 position, to be precise. I'm not sure I understand the second part of your question. Routers don't necessarily summarize on their own. they work only with what they are given via the configurations you enter. Every ip address has a host portion and a network portion. the network portion is determined by the mask you apply. network determination is made through a simple ( to a computer ) boolean XOR operation. the computer could care less where the network bits begin and end. Chuck -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of archsteinSent: Monday, November 13, 2000 8:28 PMTo: [EMAIL PROTECTED]Subject: Summarization Hi groups... Can you help me please ? What is summary address for subnet 128.213.64.0 - 128.213.95.0 ? Is that right if the summary address is 128.213.64.0 255.255.192.0 To determine ther sumary route, the router looks for the most highest-order number of bits that match. If there is no match bits, how to summarize ??? Thanks
VPI/VCI on cisco 633?
I'm trying to configure a cisco 633 SDSL DSU for use with an SDSL connection. I've been given a VCI of 473 and a VPI of 0. I configure these values on the wan0-0 port. When I go to write the config to nvram, it complains that the VPI is invalid: cbos#sho int wan0-0 WAN0-0 ATM Logical Port PVC (VPI 0, VCI 473) is configured. ScalaRate set to Auto AAL 5 UBR Traffic RFC1483 State: CLOSED Local MRU: 2048 RFC1483 Tx: 0 RFC1483 Rx: 0 CDP Packets: 0 Number of Spantree Packets: 0 Number of Unknown Packets: 0 IP Port Disabled cbos#write #ERROR# Line Number 7: ATM WAN Virtual Connection Parms = 00, 0, 473, 0 VCI value invalid for current VPI count Error: errors detected during nvram check cbos# Anyone have a pointer to docs on this, or know what this error message means? Thanks Ben _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: EIGRP over OSPF and BGP
You know, Charles, I've been pondering this setup for a while now. ( See - you did too get me after all! :-> ) Now I already posted the wisecrack about the mess in the middle, and whether or not you would even be able to get IP connectivity end to end here. RouterA: ethernet EIGRP, serial=OSPF RouterB: serial1= OSPF, serial2=BGP RouterC: serial 1=BGP, serial2=OSPF RouterD: serial1=OSPF, ethernet=EIGRP As an intellectual exercise, I'm sure many of us can put together some configurations that work. The redistribution should not be al that bad, albeit a bit unusual. I'm wondering, though, about that BGP piece in the middle. Gonna use static routes from B to C? Also - is my concept of the layout correct? Are your tunnel end points going to be the two ethernet interfaces? I'm just wondering about the mechanics here. Damn you, Charles, now you done it! You are indeed an evil one :-> Chuck Cthulu's question corner: Given: EIGRP 1 RTRA OSPF RTB BGP RTR C OSPF RTRD EIGRP1 I want RTRD and RTRA to become EIGRP peers and do the exchange routing update thing. Granted, they are not directly connected, and do not share a common subnet. If I set up a GRE tunnel between D and A, the picture then becomes: EIGRP1 RTRA <---tunnel---> RTRD EIGRP1 The tunnel becomes the common network, and therefore, EIGRP should be able to work. Only thing I am not sure about is the source interfaces for this tunnel will be different at each end (that is, each source interface will be in a different subnet).I don't have my rack online to test this out, so would appreciate any comments. Thoughts, anyone? Flames to: [EMAIL PROTECTED] Charles _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ccnp studies
I normally hate to "ditto" questions but it seems all anyone ever talks about is the CiscoPress books. Are there any worthwhile alternatives to the "bore you to death" series from CP? Tim "jennifer cribbs" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I am getting ready to study for the ccdp without formal classroom study. > Could someone please let me know or offer suggestions as to the specific books > that I need to purchase for this.What I would actually like to know is the > names of the actual books that the formal classrooms use offered by the cisco > academy for the ccnp curriculum. Those are the ones I would like to purchase. > > > Any help in this would be much appreciated. > > [EMAIL PROTECTED] > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
HSRP, NAT, OSPF - real world troubleshooting
I had something kind of ugly happen at work today and I thought I'd share the details. I have two DS1s in our office that leads to our border 7206 which is in a colocated rack. One runs to a 2611, the other to a 2621. I have two Cat 3524s tied together with a copper gigabit link. They have two VLANS - #2 is 10.10.1.0/24 and #5 is xxx.xxx.21.32/27 The 2611 has one interface plugged into VLAN2, the other into VLAN 5, while the 2621 uses an 802.1Q trunk to one switch that carries both VLANs. Both routers back each other up via HSRP - the 2611 is primary for 10.10.1.0/24, the 2621 is primary for xxx.xxx.21.32/27 - thus load balancing the traffic across the two DS1s. Both routers run OSPF. Everything is in area 0 and there are three other sites that are fed from the core 7206 via DS1s. Nothing else was happening at the other sites when my trouble occured. I have a NAT pool on each router. The 2611 was there when I started and it originally had some numbers pulled out of the air with a static route from the 7206 to the particular serial interface so they were reachable. I got tired of wrestling with that config and stole .61 and .62 from xxx.xxx.21.32/27 to use instead. When I brought the 2621 in I created a loopback 1 interface and attached xxx.xxx.21.240/32 to it and used the middle two addresses for the NAT pool. I did this so I could *see* which subnets were used where. Loopback0 on each router is a /32 taken from the top of the xxx.xxx.21.0/24 - the 2611 is xxx.xxx.21.252 and the 2621 is xxx.xxx.21.247 - this is done so we have stable router IDs in OSPF for those of you who haven't read that chapter yet. The interface on the 2611 that carries the public numbers got plugged into a port that was in the wrong vlan. The port was up/down and I didn't notice when I left on Sunday after having just converted from a 100 mbit link to the gigabit connection. This led to a couple of interesting consequences. Both of the routers private addresses were reachable via telnet from the inside and once there I could see everything else in the network but stations on the inside could not reach anything. The DNS server for our network lies on the public segment that was not reachable via the 2611 and the addresses used for NAT came from the downed interface. With the 2611 being the active HSRP interface it couldn't see DNS and it was using numbers from a network that our core router believed to be reachable only through the 2621 ... which was not where the NAT sessions were occuring. I spent two hours digging on VLANs and other stuff before I noticed the interface to the public LAN on the 2611 was up/down. I knew I liked the Loopback interface on the 2621 holding the NAT pool a lot better than stealing from the public segment and I am going to make that my policy now on any router that has to do NAT. I may find a good use for a /31 yet :-) I also screwed up on interface tracking - I tracked the DS1s which was a good thing but in a setup like this I believe the public LAN interface needs to be tracked as well. I don't know if HSRP will let you track multiple interfaces but I am going to find out as soon as I click send for this message. Take heed, your CCIE wannabes, and demonstrate your problem solving skills to the lab examiner instead of while standing in front of twenty grumpy coworkers who want to know why they can't get their email :-( _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Summarization
Hi groups... Can you help me please ? What is summary address for subnet 128.213.64.0 - 128.213.95.0 ? Is that right if the summary address is 128.213.64.0 255.255.192.0 To determine ther sumary route, the router looks for the most highest-order number of bits that match. If there is no match bits, how to summarize ??? Thanks
RE: IP route cache
if I am not wrong ip route-cache enable fast-switching while no ip route-cache disables fast-switching and drops to process switching so that's really a matter of enabling switching types between interfaces hope this helps Jason Yee -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Tony Russell Sent: Wednesday, November 08, 2000 11:04 PM To: '[EMAIL PROTECTED]' Subject: IP route cache Can someone describe why I would want to use the ip route-cache (or no ip route-cache) command. I've found references on the Cisco site about how to use it, but not why. Tony Russell Network Engineer IBEAM Broadcasting _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Dial out/in with cisco router 2509
cisco 2509 router has 8 async ports that can be used to dial in or out. if configured for dial out, each asyn interface would be allotted an IP address when it dials into its ISP and establishes a PPP link. 8 PPP links would mean 8 IP address. why would one have such a configuration and what is its use. As far as dialling-in is concerned, most ISP use like PortMaster (Livingstone) and it allotes an IP address to the host dialling into it from its pre-configured IP addresses and a PPP link is established. hence in such a scenario where would one install a 2509 router ? or am i missing something here... thanks john __ Do You Yahoo!? Yahoo! Calendar - Get organized for the holidays! http://calendar.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: VoIP config
Believe it or not, yes I do, and it's only hard copy. Cisco TAC has this document, again only in hard copy form. That's where I got my copy from. If you don't already know this, the wiring is different for each E&M type. If and when I get to it, I'll create an electronic version. I might be persuaded to share it too. ;) Rodgers Moore ""pinoal"" <[EMAIL PROTECTED]> wrote in message 8unip9$j3t$[EMAIL PROTECTED]">news:8unip9$j3t$[EMAIL PROTECTED]... > Rodgers , > > > Do you have the wiring diagrams for E&M 4 wire. I have done a few > installations and got the > wiring right by trial and error. > > > thanks > > > > > ""Rodgers Moore"" <[EMAIL PROTECTED]> wrote in message > 8uhh3t$76f$[EMAIL PROTECTED]">news:8uhh3t$76f$[EMAIL PROTECTED]... > > Reply in-line. > > > > Rodgers Moore > > > > "Amit Gupta" <[EMAIL PROTECTED]> wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > Hi All, > > > > > > Need some help in configuring VoIP > > > I am testing the loopback connectivity between my > > > router and EPABX by dialing a local extension number. > > > > > > As Soon as I dial the seizing code I get connected to > > > the router. > > > When I dial the destination pattern my call gets > > > transferred to the router,s next port > > > > Right here. Do you hear PBX dial-tone? When you dial the first digit > does > > dial-tone go away? > > > > Also at this point you should do a "show voice calls", "show voice dps". > > What is the state of all of the ports & dsp's? Does everything look good? > > > > 90% of the time I see this problem it is incomplete or incorrect PBX > > programming. > > 9% its that the PBX set for 2 wire and router 4 wire, or the reverse, or > > incorrect wiring in a 4 wire config. (Cisco was putting out incorrect > > wiring diagrams for E&M 4 wire a year ago. I assume that it's been fixed, > I > > reported it to TAC) > > Low volume level, the PBX can't hear the DTMF digits. > > PBX is made by NEC or Lucent. Both are rather picky about DTMF frequency > > accuracy and volume. To test, change the codec to G.711 on the ports so > > that no compression is being used. Or turn on local call compression > > bypass. This way the PBX's DTMF just passes through unmolested back to > > itself. > > > > > When I dial the local extension i do not get a > > > response. > > > I am using tone dialing,the Interface model is Type- 5 > > > E& M > > > Type of Signalling is Immediate > > > > > > Thanks for your clues in advance. > > > > > > Amit > > > > > > __ > > > Do You Yahoo!? > > > Thousands of Stores. Millions of Products. All in one Place. > > > http://shopping.yahoo.com/ > > > > > > _ > > > FAQ, list archives, and subscription info: > > http://www.groupstudy.com/list/cisco.html > > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > > > > > > _ > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE Written Question ?
Did the CCIE Written Question asking for the Cisco Command Line Interface (CLI) as i found on the CCNP exam track ? Regards, SBS CCNP,CCDP R&S
Re: acess list question
Access lists are only parsed until a match is made. The first line will match ftp, as well as all other tcp/ip traffic. You need to reverse the order of your lines: Access-list 101 deny tcp any any eq ftp Access-list 101 permit ip any any brian On Mon, 13 Nov 2000, Sisqo wrote: > Access-list 101 permit ip any any > Access-list 101 deny tcp any any eq ftp > > Why did the above list FAIL to prevent FTP? > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: 2501 is it worth it? HELP
continuing on the router selection. well, i too posted today as to what are the async ports that a 2509 has. It turns out that these are to connect to the modems. now to prepare for the tests as well as learing as well what would be the router to buy ? it is better to ask now better than buying and regretting later. this list has many people who have gone through this situation sometime. please share your views and suggestions as to what router would be useful for ccnp and ccie R/S. second if one were to buy 2 routers then what should those be. i checked up the iqsale site and they offer 6 months warranty. how much would a new router, say 2514 cost ? on the ebay and elsewhere 2514 go for a 1400/1300 range. thanks john --- Keith Townsend <[EMAIL PROTECTED]> wrote: > That's a fair price. You can find a better price on > e-bay. I would suggest > getting a 2507 if you can find one. It has the same > functionallity in > additional to a built-in HUB. If you find them they > will go for about > $590-$650. You tend to pay a premium on 2501's. > You can alway find 2502, > 2504 (both token ring) 250x for a lot less and you > really are not > sacrifacing much if anything. > > Hope this helps. > > Keith > > > ""Rah Sta"" <[EMAIL PROTECTED]> wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > To All, > > > > I have my eye on this refurbished 2501 router. It > comes with power supply, > > cosole kit, 1 RJ45, 1 AUI port, 8mb of Flash, 16mb > of DRAM, IOS 11.2Ent > and > > a 90 day warrenty. I say it at the site > www.IQSale.com. Is $949.46 a good > > price? Studying for CCNP. I need the hands on. > Thanks > > > > > > > > > Raheem > > > _ > > Get Your Private, Free E-mail from MSN Hotmail at > http://www.hotmail.com. > > > > Share information about yourself, create your own > public profile at > > http://profiles.msn.com. > > > > _ > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to > [EMAIL PROTECTED] > > > > > _ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Calendar - Get organized for the holidays! http://calendar.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: EIGRP over OSPF and BGP
On Mon, 13 Nov 2000, Cthulu, CCIE Candidate wrote: Anyways, I got another one: Given: EIGRP 1 RTRA OSPF RTB BGP RTR C OSPF RTRD EIGRP1 I want RTRD and RTRA to become EIGRP peers and do the exchange routing update thing. Granted, they are not directly connected, and do not share a common subnet. If I set up a GRE tunnel between D and A, the picture then becomes: EIGRP1 RTRA <---tunnel---> RTRD EIGRP1 The tunnel becomes the common network, and therefore, EIGRP should be able to work. Only thing I am not sure about is the source interfaces for this tunnel will be different at each end (that is, each source interface will be in a different subnet).I don't have my rack online to test this out, so would appreciate any comments. Thoughts, anyone? The tunnel will have it's own network. This is the network that eigrp will be configured to operate on. Of course, RTRA and RTRD will need to know how to get to x.x.x.x and y.y.y.y, respectively. RTRA: int tunnel0 ip address 192.168.0.1 255.255.255.252 tunnel mode gre ip tunnel source-interface loopback0 tunnel destination x.x.x.x router eigrp 1 network 192.168.0.0 RTRD: int tunnel0 ip address 192.168.0.2 255.255.255.252 tunnel mode gre ip tunnel source-interface loopback0 tunnel destination y.y.y.y router eigrp 1 network 192.168.0.0 Regards, --phil _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE Written Question ?
Did the CCIE Written Question asking for the Cisco Command Line Interface (CLI) as i found on the CCNP exam track ? Regards, SBS CCNP,CCDP R&S
Re: OSPF Load Balance/Metric
>Billy Monroe wrote, > >An interviewer asked me what happens if you have two paths to a Router, both >using OC-3, and routing protocols is OSPF. > >I said that OSPF is a link state protocol and its metric is "Cost", which is >10^8/Bandwidth. Load balance is enabled by default on OSPF, so packets will >be load balanced "per destination" (it should be configured if 'per packet' >is required). > >The guy then told me that I should take "Congestion" into consideration. You were right. He was wrong. > >How can this be ? I know that EIGRP or IGRP may be configured to use Load as >a metric, thus congestion would be take into account. I couldn't find any >documentation showing that OSPF takes congestion as a metric. He is REALLY wrong in trying to consider congestion as part of a routing algorithm. While (E)IGRP can consider it, EIGRP does so only for IGRP compatibility. IGRP's use of load is one of those things that sounded good at the time of development, but has not been useful in practice. There are emerging protocols that consider load/utilization, but in a manner quite different from the way IGRP does. IGRP only considered utilization on directly connected links, which can lead both to route oscillation and very bad end-to-end routing. One newer approach (e.g., OSPF-TE, ISIS-TE) is to do explicit bandwidth reservation before the routing protocol runs. When the routing computation runs, costs are derived from available bandwidth, not link bandwidth. Bandwidth reservation is either static or over a substantial time period (e.g., RSVP). Another approach (OSPF-OMP, ISIS-OMP) does consider utilization, but averaged over a significant period, and as part of a link state algorithm that does consider end-to-end. > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Don't ask "who is the youngest CCXX?" again,please
I agree totally I've gotten rejected on so many part-time contracts its not even funny. ( i just turned 19 last june ) I do have experience, but for some reason, when employers see when you do not have facial hair, they get scared and then give u the old "we'll call you". It really ticks me off and Tony.sorry man.but I HAVE TO SAY this, im glad Im not the youngest in the study group =)...but i can say this...by the time you and I are in our 30's we will rule the world...hahhahaha..( laughing and grinning devilishly ) Deepak MCSE CCNA ACT A+ Technical Analyst Ceridian Canada tony wrote: > Hi,all, > I don't think these questions make sense.I am 18, I have worked > in a Cisco Partner for about 3 years, and I've got my ccnp/dp.I am > not the youngest, and I don't want to be the youngest, I want to be > the best, of course maybe I can't. But I will try my best to be the > best, not try my best to be the youngest. Further more, certification > is just certification, no certification can reflect one's knowledge > entirely.If someone got his/her certification older than you,can we > affirm his ability is worse than you now or in the future,of course > NOT. Everyone knows,ten years ago, no one is CCIE!!! > Just my two cents, but I've seen too many "youngest " questions > here, I just want to pay more attention on the technology. > > > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Youngest CCNP
i got my MCSE CCNA ACT A+ i just turned 19 in June i work for a very large payroll company as a Technical Analyst "Peter I. Slow" wrote: > Does anyone have any idea about the age of the youngest CCNP? I was just >wondering > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
cool links
for all the newbie's.. ( which would include me also!!!..lol ) Tech Tip: Routing Protocols Technical Tips for Using and Deploying Cisco IOS Software Features and Services http://www.cisco.com/public/technotes/tech_protocol.shtml CABLE Technology Pages: Obtain Numerous Troubleshooting Documents for Cisco Cable Technologies http://www.cisco.com/pcgi-bin/Support/PSP/psp_view.pl?p=Internetworking:Cable Tech Tip: Packet Voice, Video, and Telephony Technical Tips http://www.cisco.com/warp/public/788/index.shtml _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: OSPF Totally Stubby Areas and area default-cost
Bob, I'll try to answer your first question below at the expense of possibly clouding the issue: *Question: Does this mean that each router within the area picks the closest ABR as the gateway to everything outside the area,... Well...Yes! OSPF first takes the "shortest path" to area 0. For instance in the diagram below can you predict the path from A to B? (Rtrs A,B,C,and D are all area border routers) RtrE- | \ T1 |\ T1 RtrC---56k---RtrA___|A | | || | | | RtrF T3 Area0 T3 Area1 | | | |Area2 | | T1 RtrD---T3RtrB | / | / T1 RtrG- / | --- B NOTE: This example is taken from the CCIE Power Session on OSPF which I attended at Networkers 2000 in Vegas...Presented by Dr William Parkhurst Answer: A-->C-->E-->F-->G The path is derived from these rules: 1) Shortest path to area 0 2) Shortest path across area 0 without going through a non-zero area 3) Shortest path to B without going through area 0 Your second part *Question Cont.: ...and that there is no way to control the default route? I'm not sure if you can control the default route inthe above scenario (which I provided)...If you want to deviate from the above behavior tweaking the "area default-cost" may do it though...assuming of course A had been connected to both A and B routers (or somewhere else behind RtrA giving it some other option toward RtrB) which would NOT circumvent the above rules. I'm curious though...and I'll try to research this if I can find enough available routers. Sorry I may not be of much help here but I'm currently concentrating on the CCIE lab where you are NOT permitted to use "static routes (of any kind) or Default routes" unless of course explicitly told to do so. I'll store away the possibility of using the "area default-cost" as a potential possiblity though...thanks. Here's another quote I made note of while in the CCIE Power Session which may be of help to the group: "The Routing and Switching exam tests your ability to apply configuration knowledge and skill to new situations. It is not a design test, or a test of "best pratices" for use in the field." Just FYI for others preparing for the lab. Hope this helps...Thanks and aloha, Frank Bob Hunter wrote: > > Hi, > I'm confused on the subject of totally stubby areas, and the command "area > default-cost". From what I'm reading, one of the qualifications of a totally > stubby area is that if multiple exits (ABRs) exist, routing to outside the > area does not have to take an optimal path. Does this mean that each router > within the area picks the closest ABR as the gateway to everything outside > the area, and that there is no way to control the default route? If so, does > that imply that the area default-cost is used for incoming routes? Would > incoming routes even exits if the area was a totally stubby area? > > I would very much appreciate it if someone would please set me straight. > > Thank you. > > Bob Hunter, CCNA, CNE > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
acess list question
Access-list 101 permit ip any any Access-list 101 deny tcp any any eq ftp Why did the above list FAIL to prevent FTP? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: acess list question
at what layer does the second line work, as opposed to the first line? therein lies your answer Chuck "Sisqo" <[EMAIL PROTECTED]> wrote in message 8uq9lf$75v$[EMAIL PROTECTED]">news:8uq9lf$75v$[EMAIL PROTECTED]... > Access-list 101 permit ip any any > Access-list 101 deny tcp any any eq ftp > > Why did the above list FAIL to prevent FTP? > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Subject: Default Ping Payload
> When conducting ping tests from one of our remote routers, I get anywhere from 5-13% packet loss when using the default ping payload, yet when I change the payload to anything else--such as all ones, all zeroes, alternating ones and zeroes--I get no packet loss whatsoever. > This holds true regardless of packet size. However, when using the default data pattern, larger packets get dropped more often than smaller packets. We are seeing zero input or output errors on this interface. > > This seems VERY strange to me, but I think I'll get closer to an answer when I find out what the default pattern is. > > Do any of you know what that is? If you were going from a Cisco router to a Cisco router, it would look like this(watch wrap on all links): http://www.west- point.org/users/usma1983/40768/Chesinc/docs/CiscotoCisco.txt If you were pinging from a Winthing to a Cisco device, it might look like this: http://www.west- point.org/users/usma1983/40768/Chesinc/docs/WinthingtoCisco.txt You will note that the results vary based upon the operating system involved. For a Cisco device, the repeating pattern is the following in binary: 101010001101 Which in hex is ABCD. You can vary the pattern to any four value hex character combination that you choose. Obvious choices would be 0x or 0x or maybe 0x (equal mix of ones and zeros in the payload). Of course, you will need to be in priviledge mode to do an extended ping and ensure you choose "extended commands". HTH, Paul Werner Get your own "800" number - Free Free voicemail, fax, email, and a lot more http://www.ureach.com/reg/tag _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ccnp studies
I am getting ready to study for the ccdp without formal classroom study. Could someone please let me know or offer suggestions as to the specific books that I need to purchase for this.What I would actually like to know is the names of the actual books that the formal classrooms use offered by the cisco academy for the ccnp curriculum. Those are the ones I would like to purchase. Any help in this would be much appreciated. [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: EIGRP over OSPF and BGP
Chuck, Bless you for the configs, though I am put out that this one did not give you pause...damn, I must be slipping;]I think I could attain connectivity with this...reliability, stability, usuability, routability, now that is another matter! Many thanks again, I will be looking over the configs you sent me; Charles ""Chuck Larrieu"" <[EMAIL PROTECTED]> wrote in message 005101c04ddf$405482e0$[EMAIL PROTECTED]">news:005101c04ddf$405482e0$[EMAIL PROTECTED]... > Of course, Charles, I'll lay odds you won't get end to end ip connectivity > anyway, given that mess you have created in the middle! :-> > > Chuck > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of > Cthulu, CCIE Candidate > Sent: Monday, November 13, 2000 5:15 PM > To: [EMAIL PROTECTED] > Subject: EIGRP over OSPF and BGP > > Hi, all! > > By the way, thanks to all who wrote me about where to find a cabinet... got > some good leads out of it! > > Y'all know how I love to post messages addressing weird situation and > problems? Usually, it intrigues Chuck L., causing hiim to suspend his > studies while he investigates what the heck I wrote about;) > > Anyways, I got another one: > > Given: > > EIGRP 1 RTRA OSPF RTB BGP RTR C OSPF RTRD EIGRP1 > > > I want RTRD and RTRA to become EIGRP peers and do the exchange routing > update thing. Granted, they are not directly connected, and do not share a > common subnet. If I set up a GRE tunnel between D and A, the picture then > becomes: > > EIGRP1 RTRA <---tunnel---> RTRD EIGRP1 > > The tunnel becomes the common network, and therefore, EIGRP should be able > to work. Only thing I am not sure about is the source interfaces for this > tunnel will be different at each end (that is, each source interface will be > in a different subnet).I don't have my rack online to test this out, so > would appreciate any comments. > > Thoughts, anyone? > > > Flames to: [EMAIL PROTECTED] > > > Charles > > > > > _ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ip default-gateway command does not work
Just use ip route 0.0.0.0 0.0.0.0 10.100.67.254 to set your default route. IP default-gateway should only be used if ip routing is disabled on the router. Roman At 06:36 PM 11/13/00 -0700, you wrote: >I have a problem getting the "ip default-gateway" to work on my router. >Please review the output below carefully to see what the problem is. I have >also noticed that the "show ip route" command show that Gateway of last >resort is not set > >your input is appreciated > >thanks > >Lists Wizard > >=== >Router-10(config)#ip default-gateway 10.100.67.254 >Router-10(config)#^Z >Router-10# >Router-10#ping 10.1.38.227 > >Type escape sequence to abort. >Sending 5, 100-byte ICMP Echos to 10.1.38.227, timeout is 2 seconds: >. >Success rate is 0 percent (0/5) >Router-10#sh ip route >Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP >D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area >N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 >E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP >i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate >default >U - per-user static route, o - ODR > >Gateway of last resort is not set > > 10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks >C 10.9.9.0/30 is directly connected, Ethernet0/1 >C 10.100.64.0/22 is directly connected, Ethernet0/0 >Router-10#config t >Enter configuration commands, one per line. End with CNTL/Z. >Router-10(config)#no ip default-gateway >Router-10(config)#ip route 10.1.38.227 255.255.255.255 10.100.67.254 >Router-10(config)#^Z >Router-10#ping 10.1.38.227 > >Type escape sequence to abort. >Sending 5, 100-byte ICMP Echos to 10.1.38.227, timeout is 2 seconds: >! >Success rate is 100 percent (5/5), round-trip min/avg/max = 4/6/16 ms >Router-10# > > >__ >Do You Yahoo!? >Talk to your friends online with Yahoo! Messenger. >http://im.yahoo.com > >_ >FAQ, list archives, and subscription info: >http://www.groupstudy.com/list/cisco.html >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCIE Design Lab passed
They were different, but equally challenging. The Design lab was definitely more reflective of the types of infrastructures being deployed today, while the R/S was a bit more abstract. Regards, Eric Sineath CCIE (R/S) #4504 CCIE (Design) Senior Consultant SBC DataComm -Original Message- From: Bruce Williams [mailto:[EMAIL PROTECTED]] Sent: Monday, November 13, 2000 6:33 PM To: [EMAIL PROTECTED] Subject: Re: CCIE Design Lab passed Congratulations!! What certification did you find more difficult, the CCIE Design or the CCIE R&S? Bruce [EMAIL PROTECTED] ""SINEATH, JOSEPH E (AIT)"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Folks, > > I passed the CCIE Design Lab last week, and quite a bit of my study over the > past three months was done right here. The scenario posts were extremely > helpful. This lab was a heck of a lot more "real-world" than the R/S one. > > Regards, > Eric Sineath > CCIE (R/S) #4504 > CCIE (Design) > Senior Consultant > SBC DataComm > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: BCMSN Hex- IP to MAC
you can also go from decimal to hex by dividing by 16 example given 235 235 / 16 = 14 with a remainder of 11 14 in hex is E 11 in hex is B answer EB Another example 149 168/16 = 10 with a remainder of 8 10 in hex is A 8 in hex is 8 answer A8 hex To convert hex to decimal is just as easy take the left most hex digit and multiply it by 16 then add the right digit EB in hex E * 16 E=14 14*16 = 224 B=11 224 + 11 = 235 -- André Paree-HuffA+, ASE, CCDA, CCNPMCSE+I, NET+, I-NET+[EMAIL PROTECTED][EMAIL PROTECTED]AOL AIM: pareehuff "Jim Erickson" <[EMAIL PROTECTED]> wrote in message 8uq2ro$ppv$[EMAIL PROTECTED]">news:8uq2ro$ppv$[EMAIL PROTECTED]...> No. But if you can go from decimal to binary, the step to hex is> rudimentary. Just divide each octet into two quartets and convert. For> example:> > 235 => 11101011 => 1110_1011 => 14_11 => E_B => EB> > > ---JRE---> > ""Travis Parrill"" <[EMAIL PROTECTED]> wrote in message> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...> > Does anyone know if there is a decimal to Hex conversion table on the> BCMSN> > test for the multicast IP to MAC address Translation.> >> > TP
RE: EIGRP over OSPF and BGP
Of course, Charles, I'll lay odds you won't get end to end ip connectivity anyway, given that mess you have created in the middle! :-> Chuck -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Cthulu, CCIE Candidate Sent: Monday, November 13, 2000 5:15 PM To: [EMAIL PROTECTED] Subject:EIGRP over OSPF and BGP Hi, all! By the way, thanks to all who wrote me about where to find a cabinet... got some good leads out of it! Y'all know how I love to post messages addressing weird situation and problems? Usually, it intrigues Chuck L., causing hiim to suspend his studies while he investigates what the heck I wrote about;) Anyways, I got another one: Given: EIGRP 1 RTRA OSPF RTB BGP RTR C OSPF RTRD EIGRP1 I want RTRD and RTRA to become EIGRP peers and do the exchange routing update thing. Granted, they are not directly connected, and do not share a common subnet. If I set up a GRE tunnel between D and A, the picture then becomes: EIGRP1 RTRA <---tunnel---> RTRD EIGRP1 The tunnel becomes the common network, and therefore, EIGRP should be able to work. Only thing I am not sure about is the source interfaces for this tunnel will be different at each end (that is, each source interface will be in a different subnet).I don't have my rack online to test this out, so would appreciate any comments. Thoughts, anyone? Flames to: [EMAIL PROTECTED] Charles _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: EIGRP over OSPF and BGP
I've actually done something like this in a lab. I wrote about it on the list a few months back. I am e-mailing you the configs in a separate message. ( too big for Paul to let through to the list ) but a relevant excerpt follows: Router A interface Tunnel0 ip address 172.17.1.1 255.255.0.0 tunnel source Serial0 tunnel destination 192.168.101.1 Router B interface Tunnel0 ip address 172.17.2.2 255.255.0.0 tunnel source Serial1 tunnel destination 192.168.102.1 the tunnel destinations on either router are the outside ( internet, if you will ) IP addresses of the serial interfaces. These are on entirely different networks, as would likely be the case in a real world situation or why would you need the tunnel the first place? Duh! ) The tunnel itself does have to be on the same subnet, as you can see from both router tunnel interface addresses. You will see when you get the configs. Chuck -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Cthulu, CCIE Candidate Sent: Monday, November 13, 2000 5:15 PM To: [EMAIL PROTECTED] Subject:EIGRP over OSPF and BGP Hi, all! By the way, thanks to all who wrote me about where to find a cabinet... got some good leads out of it! Y'all know how I love to post messages addressing weird situation and problems? Usually, it intrigues Chuck L., causing hiim to suspend his studies while he investigates what the heck I wrote about;) Anyways, I got another one: Given: EIGRP 1 RTRA OSPF RTB BGP RTR C OSPF RTRD EIGRP1 I want RTRD and RTRA to become EIGRP peers and do the exchange routing update thing. Granted, they are not directly connected, and do not share a common subnet. If I set up a GRE tunnel between D and A, the picture then becomes: EIGRP1 RTRA <---tunnel---> RTRD EIGRP1 The tunnel becomes the common network, and therefore, EIGRP should be able to work. Only thing I am not sure about is the source interfaces for this tunnel will be different at each end (that is, each source interface will be in a different subnet).I don't have my rack online to test this out, so would appreciate any comments. Thoughts, anyone? Flames to: [EMAIL PROTECTED] Charles _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Any good site contains Cisco Exam material?
_ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ip default-gateway command does not work
I have a problem getting the "ip default-gateway" to work on my router. Please review the output below carefully to see what the problem is. I have also noticed that the "show ip route" command show that Gateway of last resort is not set your input is appreciated thanks Lists Wizard === Router-10(config)#ip default-gateway 10.100.67.254 Router-10(config)#^Z Router-10# Router-10#ping 10.1.38.227 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.1.38.227, timeout is 2 seconds: . Success rate is 0 percent (0/5) Router-10#sh ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default U - per-user static route, o - ODR Gateway of last resort is not set 10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks C 10.9.9.0/30 is directly connected, Ethernet0/1 C 10.100.64.0/22 is directly connected, Ethernet0/0 Router-10#config t Enter configuration commands, one per line. End with CNTL/Z. Router-10(config)#no ip default-gateway Router-10(config)#ip route 10.1.38.227 255.255.255.255 10.100.67.254 Router-10(config)#^Z Router-10#ping 10.1.38.227 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.1.38.227, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/6/16 ms Router-10# __ Do You Yahoo!? Talk to your friends online with Yahoo! Messenger. http://im.yahoo.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCPrep.Com
Has anyone used CCPrep.com and if so what is your opinion of their services? John Huston [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
EIGRP over OSPF and BGP
Hi, all! By the way, thanks to all who wrote me about where to find a cabinet... got some good leads out of it! Y'all know how I love to post messages addressing weird situation and problems? Usually, it intrigues Chuck L., causing hiim to suspend his studies while he investigates what the heck I wrote about;) Anyways, I got another one: Given: EIGRP 1 RTRA OSPF RTB BGP RTR C OSPF RTRD EIGRP1 I want RTRD and RTRA to become EIGRP peers and do the exchange routing update thing. Granted, they are not directly connected, and do not share a common subnet. If I set up a GRE tunnel between D and A, the picture then becomes: EIGRP1 RTRA <---tunnel---> RTRD EIGRP1 The tunnel becomes the common network, and therefore, EIGRP should be able to work. Only thing I am not sure about is the source interfaces for this tunnel will be different at each end (that is, each source interface will be in a different subnet).I don't have my rack online to test this out, so would appreciate any comments. Thoughts, anyone? Flames to: [EMAIL PROTECTED] Charles _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: BCMSN Hex- IP to MAC
No. But if you can go from decimal to binary, the step to hex is rudimentary. Just divide each octet into two quartets and convert. For example: 235 => 11101011 => 1110_1011 => 14_11 => E_B => EB ---JRE--- ""Travis Parrill"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Does anyone know if there is a decimal to Hex conversion table on the BCMSN > test for the multicast IP to MAC address Translation. > > TP > _ > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. > > Share information about yourself, create your own public profile at > http://profiles.msn.com. > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Clarification Question: ^Z, EXIT, END
Title: RE: Clarification Question: ^Z, EXIT, END Ctrl-Z and "end" both take you out of config mode from wherever you are. "Exit" will take you out of config mode if you're at the Router(config)# prompt. If you're at any other prompt, such as Router(config-if), Router(config-router), etc., it will take you up one level (i.e. from a subinterface to the interface, or from an interface to global config). "Configuration mode" just means you're configuring the router on some level, non-specific. "Global configuration mode" is being explicit that you are at the Router(config)# prompt. Hope that clears it up for you. - Don -Original Message- From: Reel, JohnX [mailto:[EMAIL PROTECTED]] Sent: Monday, November 13, 2000 2:54 PM To: '[EMAIL PROTECTED]' Subject: Clarification Question: ^Z, EXIT, END Afternoon. In the "Cisco CCNA Exam #640-507 Certification Guide" Book, page , I am missing a clarification of terms used here... Use "Ctrl+Z" from any part of configuration mode (or use the "exit" command from global configuration mode) to exit configuration mode and return to privileged EXEC mode. The configuration mode "end" command also exits from any point in the configuration mode back to privileged EXEC mode. The "exit"" commands from submodes or contexts of configuration mode back up one level toward global configuration mode. - Is there a clean and simple explanation as to what and when to use the particular commands? - In the real world and in the CCNA test... Is there a reason that the "Global configuration mode" and "Configuration mode" are different? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: OSPF Load Balance/Metric
On Mon, 13 Nov 2000, Chuck Larrieu wrote: > So with OC3, packet over sonet is the layer two? Or ATM? Depending? nod..some could argue ATM as layer 2, 2.5, 3, whatever.but yes OC3 is just a media type. Brian > > Chuck > > -Original Message- > From: Brian [mailto:[EMAIL PROTECTED]] > Sent: Monday, November 13, 2000 3:19 PM > To: Chuck Larrieu > Cc: Billy Monroe; [EMAIL PROTECTED] > Subject: RE: OSPF Load Balance/Metric > > On Mon, 13 Nov 2000, Chuck Larrieu wrote: > > > Hh. don't ever recall reading that OSPF took "congestion" into > > consideration when creating its routing databases. > > > > OSPF will load balance across up to four equal cost paths. There might be > > some issues with per packet versus per destination, depending upon the > type > > of caching enabled or not enabled on the equipment. > > It can actually do up to 6 I beleive, just four without any configuration > needed. > > > > > > Perhaps the interviewer meant traffic shaping? Perhaps the interviewer was > > confusing the (E)IGRP metric which includes a component called "delay" ? > > Perhaps the interviewer is lost :) > > > > > Also, being ignorant of such rich kid toys as OC3, are there mechanisms > > within OC3 to deal with congestion, as is true with frame relay? > > OC3 is a layer 1 technology, its just a bitstream, so no. > > > > > Chuck > > > > -Original Message- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of > > Billy Monroe > > Sent: Monday, November 13, 2000 1:45 PM > > To: [EMAIL PROTECTED] > > Subject:OSPF Load Balance/Metric > > > > Hello: > > > > An interviewer asked me what happens if you have two paths to a Router, > both > > using OC-3, and routing protocols is OSPF. > > > > I said that OSPF is a link state protocol and its metric is "Cost", which > is > > 10^8/Bandwidth. Load balance is enabled by default on OSPF, so packets > will > > be load balanced "per destination" (it should be configured if 'per > packet' > > is required). > > > > The guy then told me that I should take "Congestion" into consideration. > > > > How can this be ? I know that EIGRP or IGRP may be configured to use Load > as > > a metric, thus congestion would be take into account. I couldn't find any > > documentation showing that OSPF takes congestion as a metric. > > > > Please let me know if I am wrong. > > > > Thanks, > > > > Billy Monroe > > CCNA, Compaq ASE > > > > > > _ > > FAQ, list archives, and subscription info: > > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > _ > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > --- > Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] > Network Administrator > ShreveNet Inc. (ASN 11881) > > --- Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BCMSN Hex- IP to MAC
Does anyone know if there is a decimal to Hex conversion table on the BCMSN test for the multicast IP to MAC address Translation. TP _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: lock and key (and telnet)
Title: RE: lock and key (and telnet) Thanks, Brian. This will be one of the e-mails I keep archived. =) - Don -Original Message- From: Brian [mailto:[EMAIL PROTECTED]] Sent: Monday, November 13, 2000 1:26 PM To: [EMAIL PROTECTED] Subject: Re: lock and key (and telnet) Responding to my own email. I found that you don't have to set "autocommand access-enable" on the vty ports themselves, that you can actually apply this to a username: username jim pass foo username jim autocommand access-enable host and then jim would use dynamic access lists, other logins not configured for autocommand access-enable host would get normal CLI access to the router. Brian On Mon, 13 Nov 2000, Brian wrote: > > I have a question regarding lock and key. If I configure my vty's for > "autocommand access-enable host", then how can I telnet to my router? I > mean, from then on out it will just log you out after logging in (and > "set" the dynamic access-list). What if I have a router with s0 (wan > side/internet) and e0 (lan side), and I want to be able to telnet to the > router, to configure it from the lan side, and I want users to be able to > telnet to the router from the wan side to set lock and key...is > this even possible? > > From what I am seeing, is that once lock and key is in effect on vty's, > you: > > 1. have to have an input access list on the interface you enter the router > on (else it complains) > 2. are immediatly logged out, and the dynamic access-list set, and their > is no way to get "into" the router via vty. > > Brian > > > --- > Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] > Network Administrator > ShreveNet Inc. (ASN 11881) > > --- Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCIE Design Lab passed
Do you know if there is online security labs with router IOS 12 enterprise, PIX Firewall, NetRanger, etc, something like www.ccbootcamp.com. Your info is greatly appreciated. Thanks, Yusuf ""SINEATH, JOSEPH E (AIT)"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Folks, > > I passed the CCIE Design Lab last week, and quite a bit of my study over the > past three months was done right here. The scenario posts were extremely > helpful. This lab was a heck of a lot more "real-world" than the R/S one. > > Regards, > Eric Sineath > CCIE (R/S) #4504 > CCIE (Design) > Senior Consultant > SBC DataComm > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: OSPF Load Balance/Metric
Just to correct this, IGRP and EIGRP both use bandwidth, delay, load, reliability, and MTU as components in their calculation of metrics. One reason why one need not redistribute one into the other with provisions for redistributing route metrics. -Original Message- From: Eneas Quintero Guerini [mailto:[EMAIL PROTECTED]] Sent: Monday, November 13, 2000 3:23 PM To: 'Chuck Larrieu'; Billy Monroe; [EMAIL PROTECTED] Subject:RE: OSPF Load Balance/Metric cost = 10 at the power of 8 / bandwidth cost is the metric that ospf uses... Eigrp uses a composite metric based on an equation for k1, k2, k3, k4 and k5... ... igrp uses bandw and delay... Rip uses hop count Regards Eneas -Original Message- From: Chuck Larrieu [SMTP:[EMAIL PROTECTED]] Sent: Lunes 13 de Noviembre de 2000 05:45 PM To: Billy Monroe; [EMAIL PROTECTED] Subject:RE: OSPF Load Balance/Metric Hh. don't ever recall reading that OSPF took "congestion" into consideration when creating its routing databases. OSPF will load balance across up to four equal cost paths. There might be some issues with per packet versus per destination, depending upon the type of caching enabled or not enabled on the equipment. Perhaps the interviewer meant traffic shaping? Perhaps the interviewer was confusing the (E)IGRP metric which includes a component called "delay" ? Also, being ignorant of such rich kid toys as OC3, are there mechanisms within OC3 to deal with congestion, as is true with frame relay? Chuck -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Billy Monroe Sent: Monday, November 13, 2000 1:45 PM To: [EMAIL PROTECTED] Subject:OSPF Load Balance/Metric Hello: An interviewer asked me what happens if you have two paths to a Router, both using OC-3, and routing protocols is OSPF. I said that OSPF is a link state protocol and its metric is "Cost", which is 10^8/Bandwidth. Load balance is enabled by default on OSPF, so packets will be load balanced "per destination" (it should be configured if 'per packet' is required). The guy then told me that I should take "Congestion" into consideration. How can this be ? I know that EIGRP or IGRP may be configured to use Load as a metric, thus congestion would be take into account. I couldn't find any documentation showing that OSPF takes congestion as a metric. Please let me know if I am wrong. Thanks, Billy Monroe CCNA, Compaq ASE _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: OSPF Load Balance/Metric
cost = 10 at the power of 8 / bandwidth cost is the metric that ospf uses... Eigrp uses a composite metric based on an equation for k1, k2, k3, k4 and k5... ... igrp uses bandw and delay... Rip uses hop count Regards Eneas -Original Message- From: Chuck Larrieu [SMTP:[EMAIL PROTECTED]] Sent: Lunes 13 de Noviembre de 2000 05:45 PM To: Billy Monroe; [EMAIL PROTECTED] Subject:RE: OSPF Load Balance/Metric Hh. don't ever recall reading that OSPF took "congestion" into consideration when creating its routing databases. OSPF will load balance across up to four equal cost paths. There might be some issues with per packet versus per destination, depending upon the type of caching enabled or not enabled on the equipment. Perhaps the interviewer meant traffic shaping? Perhaps the interviewer was confusing the (E)IGRP metric which includes a component called "delay" ? Also, being ignorant of such rich kid toys as OC3, are there mechanisms within OC3 to deal with congestion, as is true with frame relay? Chuck -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Billy Monroe Sent: Monday, November 13, 2000 1:45 PM To: [EMAIL PROTECTED] Subject:OSPF Load Balance/Metric Hello: An interviewer asked me what happens if you have two paths to a Router, both using OC-3, and routing protocols is OSPF. I said that OSPF is a link state protocol and its metric is "Cost", which is 10^8/Bandwidth. Load balance is enabled by default on OSPF, so packets will be load balanced "per destination" (it should be configured if 'per packet' is required). The guy then told me that I should take "Congestion" into consideration. How can this be ? I know that EIGRP or IGRP may be configured to use Load as a metric, thus congestion would be take into account. I couldn't find any documentation showing that OSPF takes congestion as a metric. Please let me know if I am wrong. Thanks, Billy Monroe CCNA, Compaq ASE _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCIE Design Lab passed
Congratulations!! What certification did you find more difficult, the CCIE Design or the CCIE R&S? Bruce [EMAIL PROTECTED] ""SINEATH, JOSEPH E (AIT)"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Folks, > > I passed the CCIE Design Lab last week, and quite a bit of my study over the > past three months was done right here. The scenario posts were extremely > helpful. This lab was a heck of a lot more "real-world" than the R/S one. > > Regards, > Eric Sineath > CCIE (R/S) #4504 > CCIE (Design) > Senior Consultant > SBC DataComm > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Concentrator 3000 and PIX
Hello, I'm trying to have a PIX talk to a corportate Concentrator 3030. The problem I have is PIX gets ip address from ISP by DHCP. Is there anyway to do this? Thanks in advance. Jim __ Do You Yahoo!? Yahoo! Calendar - Get organized for the holidays! http://calendar.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: OSPF Load Balance/Metric
So with OC3, packet over sonet is the layer two? Or ATM? Depending? Chuck -Original Message- From: Brian [mailto:[EMAIL PROTECTED]] Sent: Monday, November 13, 2000 3:19 PM To: Chuck Larrieu Cc: Billy Monroe; [EMAIL PROTECTED] Subject:RE: OSPF Load Balance/Metric On Mon, 13 Nov 2000, Chuck Larrieu wrote: > Hh. don't ever recall reading that OSPF took "congestion" into > consideration when creating its routing databases. > > OSPF will load balance across up to four equal cost paths. There might be > some issues with per packet versus per destination, depending upon the type > of caching enabled or not enabled on the equipment. It can actually do up to 6 I beleive, just four without any configuration needed. > > Perhaps the interviewer meant traffic shaping? Perhaps the interviewer was > confusing the (E)IGRP metric which includes a component called "delay" ? Perhaps the interviewer is lost :) > > Also, being ignorant of such rich kid toys as OC3, are there mechanisms > within OC3 to deal with congestion, as is true with frame relay? OC3 is a layer 1 technology, its just a bitstream, so no. > > Chuck > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of > Billy Monroe > Sent: Monday, November 13, 2000 1:45 PM > To: [EMAIL PROTECTED] > Subject: OSPF Load Balance/Metric > > Hello: > > An interviewer asked me what happens if you have two paths to a Router, both > using OC-3, and routing protocols is OSPF. > > I said that OSPF is a link state protocol and its metric is "Cost", which is > 10^8/Bandwidth. Load balance is enabled by default on OSPF, so packets will > be load balanced "per destination" (it should be configured if 'per packet' > is required). > > The guy then told me that I should take "Congestion" into consideration. > > How can this be ? I know that EIGRP or IGRP may be configured to use Load as > a metric, thus congestion would be take into account. I couldn't find any > documentation showing that OSPF takes congestion as a metric. > > Please let me know if I am wrong. > > Thanks, > > Billy Monroe > CCNA, Compaq ASE > > > _ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Clarification Question: ^Z, EXIT, END
Afternoon. In the "Cisco CCNA Exam #640-507 Certification Guide" Book, page , I am missing a clarification of terms used here... Use "Ctrl+Z" from any part of configuration mode (or use the "exit" command from global configuration mode) to exit configuration mode and return to privileged EXEC mode. The configuration mode "end" command also exits from any point in the configuration mode back to privileged EXEC mode. The "exit"" commands from submodes or contexts of configuration mode back up one level toward global configuration mode. - Is there a clean and simple explanation as to what and when to use the particular commands? - In the real world and in the CCNA test... Is there a reason that the "Global configuration mode" and "Configuration mode" are different? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: OSPF Load Balance/Metric
On Mon, 13 Nov 2000, Chuck Larrieu wrote: > Hh. don't ever recall reading that OSPF took "congestion" into > consideration when creating its routing databases. > > OSPF will load balance across up to four equal cost paths. There might be > some issues with per packet versus per destination, depending upon the type > of caching enabled or not enabled on the equipment. It can actually do up to 6 I beleive, just four without any configuration needed. > > Perhaps the interviewer meant traffic shaping? Perhaps the interviewer was > confusing the (E)IGRP metric which includes a component called "delay" ? Perhaps the interviewer is lost :) > > Also, being ignorant of such rich kid toys as OC3, are there mechanisms > within OC3 to deal with congestion, as is true with frame relay? OC3 is a layer 1 technology, its just a bitstream, so no. > > Chuck > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of > Billy Monroe > Sent: Monday, November 13, 2000 1:45 PM > To: [EMAIL PROTECTED] > Subject: OSPF Load Balance/Metric > > Hello: > > An interviewer asked me what happens if you have two paths to a Router, both > using OC-3, and routing protocols is OSPF. > > I said that OSPF is a link state protocol and its metric is "Cost", which is > 10^8/Bandwidth. Load balance is enabled by default on OSPF, so packets will > be load balanced "per destination" (it should be configured if 'per packet' > is required). > > The guy then told me that I should take "Congestion" into consideration. > > How can this be ? I know that EIGRP or IGRP may be configured to use Load as > a metric, thus congestion would be take into account. I couldn't find any > documentation showing that OSPF takes congestion as a metric. > > Please let me know if I am wrong. > > Thanks, > > Billy Monroe > CCNA, Compaq ASE > > > _ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: help on ISDN question
On Mon, 13 Nov 2000, Sisqo wrote: > If you have a T1 in North America and you are using ISDN to connect to > Europe, what do you use to connect? The long distance network Brian > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
help on ISDN question
If you have a T1 in North America and you are using ISDN to connect to Europe, what do you use to connect? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: OSPF Load Balance/Metric
Hh. don't ever recall reading that OSPF took "congestion" into consideration when creating its routing databases. OSPF will load balance across up to four equal cost paths. There might be some issues with per packet versus per destination, depending upon the type of caching enabled or not enabled on the equipment. Perhaps the interviewer meant traffic shaping? Perhaps the interviewer was confusing the (E)IGRP metric which includes a component called "delay" ? Also, being ignorant of such rich kid toys as OC3, are there mechanisms within OC3 to deal with congestion, as is true with frame relay? Chuck -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Billy Monroe Sent: Monday, November 13, 2000 1:45 PM To: [EMAIL PROTECTED] Subject:OSPF Load Balance/Metric Hello: An interviewer asked me what happens if you have two paths to a Router, both using OC-3, and routing protocols is OSPF. I said that OSPF is a link state protocol and its metric is "Cost", which is 10^8/Bandwidth. Load balance is enabled by default on OSPF, so packets will be load balanced "per destination" (it should be configured if 'per packet' is required). The guy then told me that I should take "Congestion" into consideration. How can this be ? I know that EIGRP or IGRP may be configured to use Load as a metric, thus congestion would be take into account. I couldn't find any documentation showing that OSPF takes congestion as a metric. Please let me know if I am wrong. Thanks, Billy Monroe CCNA, Compaq ASE _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Definition of Control Plane
I'm no place where I can check, but if memory serves, there is a decent discussion of this in Howard Berkowitz's book Designing Addressing Architectures. Chuck -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Julian Eccli Sent: Monday, November 13, 2000 2:18 PM To: [EMAIL PROTECTED] Subject:Re: Definition of Control Plane Howard, Thanks for the reply. I have heard the reference many times and when I searched the RFC's and came up with the ATM definition it did not seem to fit the context of how it was referenced in IP. Best Regards, Julian ""Howard C. Berkowitz"" <[EMAIL PROTECTED]> wrote in message news:p05001913b632114fb5be@[63.216.127.98]... : At 12:22 PM -0800 11/10/2000, Julian Eccli wrote: : >Does anyone know the definition of Control Plane from a generic : >routing protocol : >standpoint? Is it the same definition as in ATM? I have heard references to : >control planes in various talks but they were not specific to ATM. : > : > : >Best Regards, : > : >Julian : > : : Unfortunately, it isn't as well-specified in IP routing as in the : B-ISDN/ATM architecture. Many IP discussions merge what that : architecture calls the control and management plane. : : Personally, I think merging the two is rather unfortunate. In IP : networks, I consider control plane protocols those that are used for : signaling between hosts and ingress/egress routers. Examples: ARP, : IGMP. Another way to think about them is that they serve a : user-to-network role. : : I consider pure management plane protocols to those used between : routers: BGP, OSPF, EIGRP, RIP, etc. Arguably, these have a : network-to-network role. : : There are protocols that don't neatly fit, such as RSVP and ICMP. I : suppose they are control plane when host initiated and management : plane when router initiated, but that doesn't always work and is ugly : anyway. : : _ : FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html : Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] : _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Catalyst 3548 port init. problem??
Set portfast on. I have also seen issues like this with particular vendor equipment. In my case it was HP Vectra computers. In those cases it wasn't portfast, but a bad registry entry that had to be deleted. Chuck -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Aaron Bowlsbey Sent: Monday, November 13, 2000 1:25 PM To: '[EMAIL PROTECTED]' Subject:Catalyst 3548 port init. problem?? Sorry if this obvious but... I seem to be having a problem with our Catalyst 3548's. Randomly, our NT users (who are wired directly to a switch port) are logging on the their workstations with "cached information". That is, the first time they attempted to login to the domain the domain controller is unavailable. If user logs off and back on to the workstation one or two times the workstation is then able to see the domain controller. It's as if the switch port is still initializing. How can I make sure that the port stays active so the domain controller will always be visible? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCIE Design Lab passed
How do you know you're a security candidate? The results out yet? :-> Seriously - this is great. Folks like you continue to be an inspiration to al of us. Chuck -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of aaa Sent: Monday, November 13, 2000 1:36 PM To: [EMAIL PROTECTED] Subject:Re: CCIE Design Lab passed Wow! well done ! I am just right behind you aaa CCIE #4420 CCIE Security Candidate CCIE Design Candidadte ""SINEATH, JOSEPH E (AIT)"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Folks, > > I passed the CCIE Design Lab last week, and quite a bit of my study over the > past three months was done right here. The scenario posts were extremely > helpful. This lab was a heck of a lot more "real-world" than the R/S one. > > Regards, > Eric Sineath > CCIE (R/S) #4504 > CCIE (Design) > Senior Consultant > SBC DataComm > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Definition of Control Plane
Howard, Thanks for the reply. I have heard the reference many times and when I searched the RFC's and came up with the ATM definition it did not seem to fit the context of how it was referenced in IP. Best Regards, Julian ""Howard C. Berkowitz"" <[EMAIL PROTECTED]> wrote in message news:p05001913b632114fb5be@[63.216.127.98]... : At 12:22 PM -0800 11/10/2000, Julian Eccli wrote: : >Does anyone know the definition of Control Plane from a generic : >routing protocol : >standpoint? Is it the same definition as in ATM? I have heard references to : >control planes in various talks but they were not specific to ATM. : > : > : >Best Regards, : > : >Julian : > : : Unfortunately, it isn't as well-specified in IP routing as in the : B-ISDN/ATM architecture. Many IP discussions merge what that : architecture calls the control and management plane. : : Personally, I think merging the two is rather unfortunate. In IP : networks, I consider control plane protocols those that are used for : signaling between hosts and ingress/egress routers. Examples: ARP, : IGMP. Another way to think about them is that they serve a : user-to-network role. : : I consider pure management plane protocols to those used between : routers: BGP, OSPF, EIGRP, RIP, etc. Arguably, these have a : network-to-network role. : : There are protocols that don't neatly fit, such as RSVP and ICMP. I : suppose they are control plane when host initiated and management : plane when router initiated, but that doesn't always work and is ugly : anyway. : : _ : FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html : Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] : _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Labs for BCMSN (CCNP)
The book follows the course. In it, step by step, you build a "switch block". I cannot comment on the test. Labs are available from www.mentorlabs.com. > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]] > Sent: Monday, November 13, 2000 3:18 PM > To: [EMAIL PROTECTED] > Subject: Labs for BCMSN (CCNP) > > > Hello again. > > Does anyone know where I could find some lab scenarios for BCMSN. I > have a 5505 Catalyst Switch that I can fool around on and I > have cleared > the config, upgraded the IOS, messed around with VLANs and basic > configuration, and that is about it. Does anyone know of a > website or a > book that has basic lab scenarios in it to help me prepare > for BCMSN...and > the rest of the CCNP tests for that mater? > > Also, I am reading the Cisco Press book for BCMSN. The book seems to > cover design more than configuring. What does the test focus more on, > design or configuration? > > Thanks! > ~j > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
OSPF Load Balance/Metric
Hello: An interviewer asked me what happens if you have two paths to a Router, both using OC-3, and routing protocols is OSPF. I said that OSPF is a link state protocol and its metric is "Cost", which is 10^8/Bandwidth. Load balance is enabled by default on OSPF, so packets will be load balanced "per destination" (it should be configured if 'per packet' is required). The guy then told me that I should take "Congestion" into consideration. How can this be ? I know that EIGRP or IGRP may be configured to use Load as a metric, thus congestion would be take into account. I couldn't find any documentation showing that OSPF takes congestion as a metric. Please let me know if I am wrong. Thanks, Billy Monroe CCNA, Compaq ASE _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCIE Design Lab passed
Wow! well done ! I am just right behind you aaa CCIE #4420 CCIE Security Candidate CCIE Design Candidadte ""SINEATH, JOSEPH E (AIT)"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Folks, > > I passed the CCIE Design Lab last week, and quite a bit of my study over the > past three months was done right here. The scenario posts were extremely > helpful. This lab was a heck of a lot more "real-world" than the R/S one. > > Regards, > Eric Sineath > CCIE (R/S) #4504 > CCIE (Design) > Senior Consultant > SBC DataComm > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCIE Design Lab passed
yowsers! Great going! Hopefully you'll be able to post a little after action report?? (within the nda) Kevin Wigle - Original Message - From: "SINEATH, JOSEPH E (AIT)" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, 13 November, 2000 16:02 Subject: CCIE Design Lab passed > Folks, > > I passed the CCIE Design Lab last week, and quite a bit of my study over the > past three months was done right here. The scenario posts were extremely > helpful. This lab was a heck of a lot more "real-world" than the R/S one. > > Regards, > Eric Sineath > CCIE (R/S) #4504 > CCIE (Design) > Senior Consultant > SBC DataComm > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Default Ping Payload
Title: RE: Default Ping Payload I went through the motions of an extended ping on my router, answered yes to "extended commands," and one of the options there is the data pattern to use. It appears the default is 0xABCD. I didn't get this result by sniffing, so I may be wrong, but... good luck. - Don -Original Message- From: John Neiberger [mailto:[EMAIL PROTECTED]] Sent: Monday, November 13, 2000 11:54 AM To: [EMAIL PROTECTED] Subject: Default Ping Payload When conducting ping tests from one of our remote routers, I get anywhere from 5-13% packet loss when using the default ping payload, yet when I change the payload to anything else--such as all ones, all zeroes, alternating ones and zeroes--I get no packet loss whatsoever. This holds true regardless of packet size. However, when using the default data pattern, larger packets get dropped more often than smaller packets. We are seeing zero input or output errors on this interface. This seems VERY strange to me, but I think I'll get closer to an answer when I find out what the default pattern is. Do any of you know what that is? TIA, John Neiberger ___ Tired of slow Internet? Get @Home Broadband Internet http://www.home.com/xinbox/signup.html _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: lock and key (and telnet)
Responding to my own email. I found that you don't have to set "autocommand access-enable" on the vty ports themselves, that you can actually apply this to a username: username jim pass foo username jim autocommand access-enable host and then jim would use dynamic access lists, other logins not configured for autocommand access-enable host would get normal CLI access to the router. Brian On Mon, 13 Nov 2000, Brian wrote: > > I have a question regarding lock and key. If I configure my vty's for > "autocommand access-enable host", then how can I telnet to my router? I > mean, from then on out it will just log you out after logging in (and > "set" the dynamic access-list). What if I have a router with s0 (wan > side/internet) and e0 (lan side), and I want to be able to telnet to the > router, to configure it from the lan side, and I want users to be able to > telnet to the router from the wan side to set lock and key...is > this even possible? > > From what I am seeing, is that once lock and key is in effect on vty's, > you: > > 1. have to have an input access list on the interface you enter the router > on (else it complains) > 2. are immediatly logged out, and the dynamic access-list set, and their > is no way to get "into" the router via vty. > > Brian > > > --- > Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] > Network Administrator > ShreveNet Inc. (ASN 11881) > > --- Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Catalyst 3548 port init. problem??
Sorry if this obvious but... I seem to be having a problem with our Catalyst 3548's. Randomly, our NT users (who are wired directly to a switch port) are logging on the their workstations with "cached information". That is, the first time they attempted to login to the domain the domain controller is unavailable. If user logs off and back on to the workstation one or two times the workstation is then able to see the domain controller. It's as if the switch port is still initializing. How can I make sure that the port stays active so the domain controller will always be visible? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: value of CCNP
Well I am in Sacramento and getting my CCNA helped me land a new job that doubled my previous salary. I am quite certain that CCNP would be of significant value to you. Adam Hickey [EMAIL PROTECTED] - Original Message - From: "Keith J" <[EMAIL PROTECTED]> To: "Cisco@Groupstudy. Com" <[EMAIL PROTECTED]> Sent: Monday, November 13, 2000 11:58 AM Subject: value of CCNP > Hi all > > I am new. Considering adding CCDP and NP to my certs. Anyone know what > the value of a ccnp/dp with 3-4 years network exp in the silocon valley > area > > and then again in the sacramento area...thinking of moving up there to > buy a home. > > breaking the ice > > keith j. > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Labs for BCMSN (CCNP)
Hello again. Does anyone know where I could find some lab scenarios for BCMSN. I have a 5505 Catalyst Switch that I can fool around on and I have cleared the config, upgraded the IOS, messed around with VLANs and basic configuration, and that is about it. Does anyone know of a website or a book that has basic lab scenarios in it to help me prepare for BCMSN and the rest of the CCNP tests for that mater? Also, I am reading the Cisco Press book for BCMSN. The book seems to cover design more than configuring. What does the test focus more on, design or configuration? Thanks! ~j
passed MCNS 2
I passed MCNS 2 this morning and did the CCIE Security written beta last friday. The CCIE written wasn't as tough as I expected, though I might not pass it anyway. I tried to compare the way IPsec implemented and configured in Cisco router and Win2K. Enhanced IP Security for Cisco network did very good job in introducing me to IPsec and CBAC. Other book I used was Designing Cisco Network and PIX firewall documentation at CCO: http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_v52/index.htm. These three references cover most of the stuff but not everything. Apparently NetRanger/Cisco Centri Firewall has been removed from MCNS objectives. My plan is to take CCIE security and CCSE however I have no access to PIX at the moment. Is anyone out there know if there is any online labs like www.ccbootcamp.com but specialising in security. Thanks for any info. Cheers, Yusuf _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Lab setup
Privilege exec level configurations allowing those logged in via telnet only certain commands. This can be excruciating sometimes, depending on what you want to permit. And getting rid of them can be real fun ;-> Chuck -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of NetEng Sent: Monday, November 13, 2000 12:29 PM To: [EMAIL PROTECTED] Subject:Lab setup I would like to setup a lab at work that myself and co-workers can access from home/internet. How do I set it up so no one can change the config on the access router (dial-up ports only, I want the other ports to be configurable)? If someone messes something up on another router, I want to be able to fix it remotely. Any suggestions are appreciated. Thanks. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
lock and key (and telnet)
I have a question regarding lock and key. If I configure my vty's for "autocommand access-enable host", then how can I telnet to my router? I mean, from then on out it will just log you out after logging in (and "set" the dynamic access-list). What if I have a router with s0 (wan side/internet) and e0 (lan side), and I want to be able to telnet to the router, to configure it from the lan side, and I want users to be able to telnet to the router from the wan side to set lock and key...is this even possible? >From what I am seeing, is that once lock and key is in effect on vty's, you: 1. have to have an input access list on the interface you enter the router on (else it complains) 2. are immediatly logged out, and the dynamic access-list set, and their is no way to get "into" the router via vty. Brian --- Brian Feeny, CCNP, CCDP [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: isbn#'s
I keep my personal list at two places: amazon.com and fatbrain.com (now actually the same place). -Original Message- From: jennifer cribbs [mailto:[EMAIL PROTECTED]] Sent: Monday, November 13, 2000 12:42 PM To: [EMAIL PROTECTED] Subject: isbn#'s What are the isbn number's for all bscn, bcmsn, bcran and the cid test from cisco press please? i am having trouble locating these. thanks, [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Anyone familiar with SmartCertify?
Or Invest $500 on books at 50 dollars you could get all cisco press books covering the exams + 4 ICND DCN BCMSN BCRAN BCSN CIT CID DOYLE - ROUTING tcp KENNEDY- SWITCHING HALABI - BGP OSPF - THOMAS the remaining $2200 for three 25xxs on ebay You had to pay for tests anyway. Duck - Original Message - From: Mask Of Zorro <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Monday, November 13, 2000 10:54 AM Subject: Re: Anyone familiar with SmartCertify? > $2700?? R they Nutz??? > > Take $200 and invest in Cisco Press books. > Take $500 and invest in some rack time. > Take the remaining $2000 and use it to pay for attempts at the exams. That's > 5 attempts per exam. > > You are bound to pass each one on the first or second attempt, saving you > hundreds of dollars over the StupidCertify method. > > My humble 2 cents... > > Z > > > >From: "Gardner, Donald/COR" <[EMAIL PROTECTED]> > >Reply-To: "Gardner, Donald/COR" <[EMAIL PROTECTED]> > >To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]> > >Subject: Anyone familiar with SmartCertify? > >Date: Mon, 13 Nov 2000 11:28:56 -0700 > > > >These people have called me a couple of times to see if I'm interested in > >their CCNP courseware. The "sale" they have going on now gives you the > >CCNP > >package for $2700. I've never heard of them before. Anyone used it? > > > >http://www.cisco-certification-training.com/productinfo/ccnp.asp > > > >Don > > > > > >_ > >FAQ, list archives, and subscription info: > >http://www.groupstudy.com/list/cisco.html > >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > _ > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. > > Share information about yourself, create your own public profile at > http://profiles.msn.com. > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE Design Lab passed
Folks, I passed the CCIE Design Lab last week, and quite a bit of my study over the past three months was done right here. The scenario posts were extremely helpful. This lab was a heck of a lot more "real-world" than the R/S one. Regards, Eric Sineath CCIE (R/S) #4504 CCIE (Design) Senior Consultant SBC DataComm _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ntp query
If the routers can't be configured with polling interval to query the ntp server, will they then continue to poll every 60-64 seconds? Or do they only poll when the time is not synch'd with the server? Does the algorithm detect this dynamically? I've seen on Unix servers where the poll stat was either 512 (8min) or 1024 (17 min), will Cisco router/switch behave similarly? where by default it polls once every 60-64secs but as long as time synch's with the server it won't poll again for anumber of minutes later? Thanks. J.Sunia Network Engineer _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
isbn#'s
What are the isbn number's for all bscn, bcmsn, bcran and the cid test from cisco press please? i am having trouble locating these. thanks, [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
value of CCNP
Hi all I am new. Considering adding CCDP and NP to my certs. Anyone know what the value of a ccnp/dp with 3-4 years network exp in the silocon valley area and then again in the sacramento area...thinking of moving up there to buy a home. breaking the ice keith j. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Lab setup
I would like to setup a lab at work that myself and co-workers can access from home/internet. How do I set it up so no one can change the config on the access router (dial-up ports only, I want the other ports to be configurable)? If someone messes something up on another router, I want to be able to fix it remotely. Any suggestions are appreciated. Thanks. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCIE Inquiries
At 08:13 AM 11/13/00, Chuck Larrieu wrote: >I can't resist.. > >-Original Message- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of >Peter Abraham >Sent: Monday, November 13, 2000 7:51 AM >To: [EMAIL PROTECTED] >Cc: [EMAIL PROTECTED] >Subject:CCIE Inquiries > >Good day all, > >I have two questions. > >(1) Which CCIE track is most promising? > >CL: They all promise the same thing - lotsa work, strained relationships, Well, unless you're six and don't have any relationship with anyone but your teddy bear and your routers. &;-) Regarding which is more "promising," I would say that the design CCIE isn't very well known yet. So if you get that one instead of the traditional R&S CCIE, you'll have to keep explaining yourself. But if you like design work better, then that's just a small negative compared to the positives. > a >bunch of stress, and humiliation in the lab ;-> >Of course, if you attain it, then the promise is wine, women, song, and a >ton of dough ;-> > >(2) Which materials are required for the written exam? > >CL: www.cisco.com - everything you need to know is there. > >I will appreciate you assistance in pointing me in the right direction. > >Thank you. > >Peter. > >P.S. Priscilla I need your assistance. I know you are a Cisco guru! >_ >Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. > >Share information about yourself, create your own public profile at >http://profiles.msn.com. > >_ >FAQ, list archives, and subscription info: >http://www.groupstudy.com/list/cisco.html >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > >_ >FAQ, list archives, and subscription info: >http://www.groupstudy.com/list/cisco.html >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Priscilla Oppenheimer http://www.priscilla.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: BCMSN CiscoPress Book
"Marco Rodrigues" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello Group, > > I dont' know if anyone found this yet, but I couldn't find an > errata on the ciscopress homepage so here it goes. On Pg .100 it states > that a VLAN ID header is 10 bits long in the first 26 bytes of the ISL > encapulation. But later in Figure 3-7 it says the VLAN ID field is 15 > bits. Can someone clarify this for me? I don't have the book handy, so I can't cover this one. I will say that you will find many more errors in this book. It is a good reference, and will get you though the test, but if ever a book screamed for an errata, its this one. There were a couple of others pointed out by others, so check the groupstudy archives. One bad one is in the exercises for multicast IP-to-MAC translation. > Another issue is on Pg 104 is says original ethernet frames can't exceed > 1518 bytes. But they state that if using 802.1q the frame becomes 1522 > bytes long. I thought 802.1q inserts it's information into the exsisting > ethernet frame and ISL encapulates it making the size of the frame 1522 > bytes. Can someone also clarify this of me? IIRC, the frame, with the 802.1q tag inserted, is still an ethernet frame, and thus you could get notification on the switch of oversized frames if it exceeds 1518 bytes. However, with the ISL encapsulation, the frame is no longer an ethernet frame, it is an ISL frame, so the size limitation doesn't apply. ---JRE--- _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Default Ping Payload
When conducting ping tests from one of our remote routers, I get anywhere from 5-13% packet loss when using the default ping payload, yet when I change the payload to anything else--such as all ones, all zeroes, alternating ones and zeroes--I get no packet loss whatsoever. This holds true regardless of packet size. However, when using the default data pattern, larger packets get dropped more often than smaller packets. We are seeing zero input or output errors on this interface. This seems VERY strange to me, but I think I'll get closer to an answer when I find out what the default pattern is. Do any of you know what that is? TIA, John Neiberger ___ Tired of slow Internet? Get @Home Broadband Internet http://www.home.com/xinbox/signup.html _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE,CCIE,CCIE!
Ok! I want to learn some Security stuff ( a little bit tired of routing protocols) so I am going to get CCIE Security in the next three months , following CCIE Design , just to get some really fun!!. Who wants to join me?. aaa CCIE #4420 _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ISDN Cisco to Shiva
Hi, Wondering if someone could help. I have been trying to set up a 3620 to dial in to a shiva intergrator by using dialer profiles. The router was configured using dialer map's but for some reason appeared to be very slow to open the isdn line up (to actually open it, not the PPP stage) using dialer profiles the line open's quickly but doesnt connect, debugging ppp auth returns nothing and debuging ppp neg shows the shiva rejecting chap. The shiva does work using chap when using dialer map's on the cisco. Im guessing that the problem is with my config of the dialer profiles, but i cant work out why. Here is dialer interface config, interface dialer0 ip address 10.10.10.1 255.255.255.0 encapsulation ppp dialer remote-name shiva dialer pool 1 dialer-group 1 no cdp enable ppp authentication chap What i dont understand is why it doesnt even reach the authentication stage.the person supporting the shiva's isnt gonna change the config coz it already works that end!! TIA, Neil _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Passed BCMSN!! Boson BCRAN
John, Good job on BCMSN. I passed BCRAN about ten days ago and I used BOSON test #1. I thought is was quite helpful and well worth the money. I also used the Cisco-Press book (has everything) and the McGraw Hill (easier to read) to prep for BCRAN. Only one more (Support) to go for me.it gets easier to spend those long hours studying the closer you get to CCNP!!! --Scott john wood wrote: > Thanks Group, > > Just passed the BCMSN yesterday, 2 more to go! > > Just a note on the BCMSN, you really got to know your stuff for most of the > questions were asking the materials backward. Instead of asking you cause > to the effect, they're asking you the effect to the cause. DO KNOW VTP > WELL, they drill it pretty well. A note on the Boson BCMSN #2, not very > helful as on the test but just general understanding of the material. I > don't think it helped me one bit but it has one question identical to the > real test. > > Moving on the BCRAN, any words on the Boson BCRAN test? are they any good > at all? Books or resources to suggest would be greatly appreciated! > > Thanks, > > John > > --- > FREE! The World's Best Email Address @email.com > Reserve your name now at http://www.email.com > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Some OSPF Questions
If you look at page 432, Table 9.1 in Doyle's "Routing TCP/IP" for the OSPF interface state machine, you will see clearly that one of the events (6). is "the expiration of the RouterDeadInterval without having received a Hello from the DR or the BDR or both", which changes directly to the DR/BDR election state. This implies that the DR/BDR election process is associated with the Hello interval, not an LSA. It makes sense, because every Hello packet states the DR and the BDR. If the DR goes down, how does it send an LSA to notify anybody about it? I am not sure exactly what a "missed LSA" means in this regard. The state diagram is probably the source from which that actual software algorithms were derived. JMHO MLC "David Armstrong" <[EMAIL PROTECTED]> wrote in message 8up5n1$src$[EMAIL PROTECTED]">news:8up5n1$src$[EMAIL PROTECTED]... > This has been an awesome thread to me. Thanks everyone for the input. > Evidently I'm not alone in being confused over BDR to DR promotion. The > books and literature I've found have clearly stated that the event to > promote BDR's to DR's is a missed LSA; however, the tests here show > otherwise. Winston, I'm with you: I hope they never ask this on the test. > I'll have to decide between what I believe to be right and what the book > states as right. > > I still think there's a piece missing. 40 seconds to take over the functions > of DR seems like it could create routing delays or time outs on a large > network. I'm going to continue to look for a definitive answer. > > Thanks Again, > > David > > ""David Armstrong"" <[EMAIL PROTECTED]> wrote in message > 8uh8vj$c47$[EMAIL PROTECTED]">news:8uh8vj$c47$[EMAIL PROTECTED]... > > Last night at our BSCN study group meeting in Dallas we had some questions > > about OSPF that we weren't able to resolve. If someone or ones could > answer > > these it would clarify some areas we're a little fuzzy on. Also, if you're > > iin the Dallas Ft. Worth area and would like to attend, we'd love to have > > you join us.. > > > > Thanks for any help, > > > > David Armstrong > > > > > > 1) What is the default time period that the BDR waits when listening to > > LSA's from the DR before it decides that the DR is down and promotes > itself > > to DR. All the literature we could find simply said that the BDR waits for > > the specified time period but never said what that period is. > > > > 2) In a Point-to-Point network in which the router in Area 0 is connected > to > > FR, ISDN, X.25 or ATM branch offices (networks), how does convergence and > > updates take place? From what we've found a DR and BDR is not elected in a > > strictly Point-to-Point network. > > > > I think an example would explain this question better: We have one 3620 > > router in our Ft. Worth office connected to an office in Houston (via FR), > > and office in Kansas City (via FR), an office in the DFW area (via ISDN) > and > > the owner's home (via ISDN). The 3620 is behind a firewall (Pix 520) and > the > > firewall is connected to a 1720 going to the Internet. I'd like to > implement > > OSPF on our network simply for the experience. However, I don't have 2 > > routers internally on our Ethernet LAN that can be configured for Area 0 > and > > elected to DR and BDR. All other routers connected to that router are via > > NBMA Point-to-Point connections. Since I only have one router on the > > Broadcast Multiaccess network (the 3620) and routers connected via PtoP > > don't participate in DR and BDR elections, how would updates occur? Can > > their only be one DR (in this case the 3620)? > > > > 3) The books and tutorials all state that "router ospf 6" defines ospf on > > the router with a process ID of 6. They then all say that you shouldn't > > define more than one process. Does that mean that you can have a router > with > > the following: > > > > router ospf 6 > > network 10.100.0.0 0.0.255.255 > > > > router ospf 7 > > network 10.200.0.0 0.0.255.255 > > > > If this is an allowed configuration, what kind of instances would it be > used > > for? Also, exactly what is the process ID used for? > > > > > > > > > > _ > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Calling Tacacs+ experts: How to Customize Logon Prompt
Hi, We are using PIX with Cisco secure for NT4. Does anyone know how to customize Logon prompt that users get when they access Internet. I posted this last week but did not get any response. Is it possible or not. Can someone atleast confirm that. Thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Anyone familiar with SmartCertify?
Tell ya what, Send me $2700.00 and then go and read the Documentation I have posted for free at http://www.gdd.net/cisco then pass your CCNP and we'll all be happy (You and I anyways) :-) Clayton Dukes Internetwork Solutions Engineer Internetwork Management Engineer Thrupoint, Inc. CCNA, CCDA, CCDP, CCNP SunCSA, Etc. - Original Message - From: Gardner, Donald/COR <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, November 13, 2000 1:28 PM Subject: Anyone familiar with SmartCertify? > These people have called me a couple of times to see if I'm interested in > their CCNP courseware. The "sale" they have going on now gives you the CCNP > package for $2700. I've never heard of them before. Anyone used it? > > http://www.cisco-certification-training.com/productinfo/ccnp.asp > > Don > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Anyone familiar with SmartCertify?
$2700?? R they Nutz??? Take $200 and invest in Cisco Press books. Take $500 and invest in some rack time. Take the remaining $2000 and use it to pay for attempts at the exams. That's 5 attempts per exam. You are bound to pass each one on the first or second attempt, saving you hundreds of dollars over the StupidCertify method. My humble 2 cents... Z >From: "Gardner, Donald/COR" <[EMAIL PROTECTED]> >Reply-To: "Gardner, Donald/COR" <[EMAIL PROTECTED]> >To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]> >Subject: Anyone familiar with SmartCertify? >Date: Mon, 13 Nov 2000 11:28:56 -0700 > >These people have called me a couple of times to see if I'm interested in >their CCNP courseware. The "sale" they have going on now gives you the >CCNP >package for $2700. I've never heard of them before. Anyone used it? > >http://www.cisco-certification-training.com/productinfo/ccnp.asp > >Don > > >_ >FAQ, list archives, and subscription info: >http://www.groupstudy.com/list/cisco.html >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Passed BCMSN!! Boson BCRAN
Thanks Group, Just passed the BCMSN yesterday, 2 more to go! Just a note on the BCMSN, you really got to know your stuff for most of the questions were asking the materials backward. Instead of asking you cause to the effect, they're asking you the effect to the cause. DO KNOW VTP WELL, they drill it pretty well. A note on the Boson BCMSN #2, not very helful as on the test but just general understanding of the material. I don't think it helped me one bit but it has one question identical to the real test. Moving on the BCRAN, any words on the Boson BCRAN test? are they any good at all? Books or resources to suggest would be greatly appreciated! Thanks, John --- FREE! The World's Best Email Address @email.com Reserve your name now at http://www.email.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
modem question for BCRAN
What command begins the initialization string for a sportster usr modem? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
