problem on FR
I am configuring a multichannel E1 board on 7513 to connect with a FR net. when i use SH FRAME PVC ,i got the the PVC status is "deleted " or "inactive" what acturally does it mean ? as far as i know ,"deleted" means the line between router and FR switch is not OK, and "inactive" means OK. i also got the following infor when i unplug the line from the router and then plug it back. (i opened deb frame packet and deb frame event on) serial4/0/0:0 broadcast search serial4/0/0:0 encaps failed on broadcast for link 7(IP) what does it mean? Any help is appreciated. Frank _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Raw TCP Connection
Hello Could you please tell me where to find any information about preparing Raw TCP connection from analog modem to access server (cisco). How it works ? Client says also something about PP4 protocol. I can't find any information about that on Cisco side. Any help? Regards EMil _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: problem on FR
from my understanding, "inactive" means the line to the switch is fine, but the end to end connectivity is a problem As for the log messages, maybe a form of lmi auto sensing -Original Message- From: Frank [mailto:[EMAIL PROTECTED]] Sent: 02 January 2001 10:36 To: [EMAIL PROTECTED] Subject: problem on FR I am configuring a multichannel E1 board on 7513 to connect with a FR net. when i use SH FRAME PVC ,i got the the PVC status is "deleted " or "inactive" what acturally does it mean ? as far as i know ,"deleted" means the line between router and FR switch is not OK, and "inactive" means OK. i also got the following infor when i unplug the line from the router and then plug it back. (i opened deb frame packet and deb frame event on) serial4/0/0:0 broadcast search serial4/0/0:0 encaps failed on broadcast for link 7(IP) what does it mean? Any help is appreciated. Frank _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Lab Preparation Advice Revised
Please can some one advise if there is a "CCIE" certification in Security. Thank you in advance. Regards Inderpal -Original Message- From: Ronald James [SMTP:[EMAIL PROTECTED]] Sent: Saturday, December 09, 2000 11:32 AM To: [EMAIL PROTECTED] Subject: Re: Lab Preparation Advice Revised thanks, Chuck! ""Chuck Larrieu"" [EMAIL PROTECTED] wrote in message 001d01c060e7$46e68c00$[EMAIL PROTECTED]">news:001d01c060e7$46e68c00$[EMAIL PROTECTED]... Hey, everyone, I've cleaned up my CCIE Lab preparation advice file, adding some thoughts from some folks who recently passed ( with their permission, of course. ) Check it out on my web site www.chuck.to/CCIEAdvice.htm Chuck -- I am Locutus, a CCIE Lab Proctor. Xx_Brain_dumps_xX are futile. Your life as it has been is over ( if you hope to pass ) From this time forward, you will study US! ( apologies to the folks at Star Trek TNG ) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ** This message may contain information which is confidential or privileged. If you are not the intended recipient, please advise the sender immediately by reply e-mail and delete this message and any attachments without retaining a copy. ** _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Switching 2.0 and DDR
Hello group, The test outline for BCMSN 640-504 indicates that the exam includes DDR and Cisco TAC/CCO. I've been studying from the Coriolis Exam Prep, and there's no mention of Dial On Demand Routing or Cisco TAC/CCO. http://www.cisco.com/warp/public/10/wwtraining/certprog/testing/pdf/bcmsn.pdf Can somebody confirm that these topic are covered on 640-504? Thanks. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re:
ip subnet-zero is cool only for routing protocols that support VLSM basically by putting ip subnet-zero in your configuration you allow your network number to be used as a host so you save one ip address but remember only works on protocols that support VLSM examples are eigrp, ospf , bgp etc. suaveguru --- caifeng tang [EMAIL PROTECTED] wrote: Hi.guy Happy new year to all of you. I wonder what is the ip subnet-zero, when and where use it. Would any = one can tell me? Thanks. Shelly=20 _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Photos - Share your holiday photos online! http://photos.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Trade
Hello Everybody. I am looking for CISCO CCNP / CCIE Ebooks.. If anybody have Sybex or any other publisher's Ebooks than please let me know.I want to trade these ebooks. I have lot of resources / tests for A+, MCSE, Oracle, CNE and MCSE 2000. ( All are very cool tests ) If anyone is interested in this trade than please send me an email at [EMAIL PROTECTED] Thanks Iyuri Get free email and a permanent address at http://www.netaddress.com/?N=1 _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Frame Relay - can't get the clear picture of it yet!
Hi, Before I bother you about this, I searched the archives, but I can't get it clear to me. Sorry but this has been constantly irritating me. I quess there's a big BUG in my understanding. This example is roughly from Jeff Doyle's Routing TCP/IP pp.557~565 There is a star topology frame relay network. HQ is a hub router with three branch routers BR1 , BR2 and BR3. Branch routers have only one PVC each to HQ(This is a partially meshed FR network). (point-to-point subinterfaces are not configured) Please correct me if I'm wrong! CASE 1 - UNICAST packet: Can BR1 ping to another branch router BR2?(I believe so) If it's YES, HQ is responsible for "relaying" ping to BR2. What's happening is as follows: 1. BR1 originates a ping packet and encapsulates it with its own locally significant DLCI number (for example, 200) 2. It is propagated via the established PVC through F/R Cloud to HQ with HQ's local DLCI number (for example, 100: I understand there's no direct correspondence between two DLCI numbers), 3. HQ's layer 2 (ie,F/R) strips F/R header off the received frame and examines its destination IP, then decides it doesn't belong to HQ itself. 4. HQ's layer 2 looks up its frame relay maps configured statically or dynamically(through Inverse ARP). If there is a matching entry for it, It is properly encapsulated and propagated to BR1. If there's no matching entry for it, HQ just drops it. 5. Finally BR2 receives the frame. CASE 2 - BROADCAST packet: Can BR1 send RIPv1 updates to all other branch routers BR2 and BR3 as well as to HQ. (I believe so) 1. BR1's RIP delivers RIPv1 updates to lower layer F/R, and if F/R is not configured to propagate broadcast traffic, the packet is dropped, Otherwise, if it is configured so through frame-relay map command) It is propagated to HQ as explained step 1 of case 1. But in this case destination ip is set to broadcast address 255.255.255.255. 2. In this case, HQ recognizes it as broadcast packet, so HQ replicates and propagates the broadcast traffic to each PVC except originationing PVC 3. BR2 and BR3 receives the frame. CASE 3 - BROADCAST revisited: If BR2 and B3 are directly connected, from my understanding of CASE 2, there might be a broadcast storm like what happens on LAN Switching. All of this probable misunderstanding is due to my lack of field experience. So I always try to read widely, which is the only way I can do now. Please correct my ignorance. Thanks in advance. Jaeheon Yoo _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCNP Exam
Hi all I have jsut passed my CCDA, it was tough. Now i going for CCNP, i wonder which paper should i go first. Can anyone recommend which one should i go first then followed.. Thank, with regards Chan CCDA, CCNA _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Ping response between subnets slow
Hi Everybody, Need some help on the following problem I have 2 subnets configured on my LAN say ( x.x.1.0 and x.x.2.0 )with a SM of 255.255.255.0. There are 2 Catalyst switches ( each one on a different subnet) The router is configured with a primary and a secondary address on the ethernet port say x.x.1.1 and x.x.2.1 When I ping a station on one subnet to another and viceversa the response time is very high (sometimes upto 80ms) while the response time while pinging in the same subnet is less than 10ms. Need some clues on the possible reasons for this Thanks Regards Amit __ Do You Yahoo!? Yahoo! Photos - Share your holiday photos online! http://photos.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Job Openings??? (fwd)
A CCIE list is not the right forum for anyone to be seeking a job, especially someone entry level. Go to monster.com or dice.com and do a web search like everyone else. Also, attachments are not allowed on the list. AOL addresses probably shouldn't be either for that matter. On Tue, 2 Jan 2001 [EMAIL PROTECTED] wrote: Hello---I have been a CCNA since July 13 and have had no luck finding a job. I live in Houston and would prefer a job in Houston but I also have family in Chicago; VirginaiaBeach, Virginia; and New York. I have pc helpdesk experience troubleshooting Compaq hardware and software, but have no professional networking or Cisco experience..only classroom and lab experience with 2500 series routers.I am not looking for a high salary just enough to get by, my main focus is getting experience. My resume is attached. Feel free to look at it and send me an email or call. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BCMSN Questions - Pls Help
Hi While i am preparing for my Switching 2.0 Exam, i encounter the following 2 questions while i do the pracice exams which have different answers. Would appreciate if someone could enlighten me what should be the CORRECT answer. Question 1 == The ACME company is a small manufacturing company that wants to interconnect users on multiple floors in the same building. To date, the company has only 15 employees but plans to triple in number in the next year. Users require access to large graphic files on the workgroup servers. What is the most appropriate device for the access layer? A. Catalyst 8500 series switch B. Catalyst 5500 series switch with an internal RSM C. Catalyst 1900 series switch with 10 BaseT ports D. Catalyst 2900 series switch with 100 BaseTX ports COLT said that the answer should be D BUT the course book's answer is C. So which one should it be??? Question 2 === how to find out what error messages were being sent to the other out-bands besides the console port. So what is the answer for this? Hope someone can help. Thanks Regards _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cool DDoS (Distributed Denial of Service) link
From Network Computing: http://www.nwc.com/1201/1201f1c1.html Chuck Church CCNP, CCDP, MCNE, MCSE Sr. Network Engineer Magnacom Technologies 140 N. Rt. 303 Valley Cottage, NY 10989 845-267-4000 x218 _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCNP Exam
ROUTING 2.0 Chiao Liang [EMAIL PROTECTED] wrote: Hi all I have jsut passed my CCDA, it was tough. Now i going for CCNP, i wonder which paper should i go first. Can anyone recommend which one should i go first then followed.. Thank, with regards Chan CCDA, CCNA _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] = = = = = = = = = = = = = = = = = = [EMAIL PROTECTED] = = = = = = = = = = = = = = = = = = - Do You Yahoo!? Yahoo! Photos - Share your holiday photos online! _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Spanning Tree and Root Bridge Question
Hi Pls refer to my Switch1 Spanning Tree display. Is this my Root Bridge? How come the MAC for Switch1 is 00-00-00-00-00-00? Any problem with this switch? it is so different from Switch2 (pls refer to the below) Switch1 (enable) sh spantree VLAN 1 Spanning tree enabled Spanning tree type ieee Designated Root 00-00-00-00-00-00 Designated Root Priority0 Designated Root Cost0 Designated Root Port1/0 Root Max Age 0 secHello Time 0 sec Forward Delay 0 sec Bridge ID MAC ADDR 00-00-00-00-00-00 Bridge ID Priority 32768 Bridge Max Age 20 secHello Time 2 sec Forward Delay 15 sec Port Vlan Port-StateCost Priority Portfast Channel_id - - -- -- Switch1 (enable) Switch2 (enable) sh spantree VLAN 1 Spanning tree enabled Spanning tree type ieee Designated Root 00-02-fc-10-40-00 Designated Root Priority32768 Designated Root Cost0 Designated Root Port1/0 Root Max Age 20 secHello Time 2 sec Forward Delay 15 sec Bridge ID MAC ADDR 00-02-fc-10-40-00 Bridge ID Priority 32768 Bridge Max Age 20 secHello Time 2 sec Forward Delay 15 sec Port Vlan Port-State Cost Priority Fast-Start Group-Method - - - -- 2/1 1 forwarding1932 disabled 2/9 1 not-connected10032 disabled 2/10 1 not-connected10032 disabled 2/11 1 not-connected10032 disabled 2/12 1 not-connected10032 disabled 2/13 1 not-connected10032 disabled 2/14 1 not-connected10032 disabled 2/15 1 not-connected10032 disabled 2/16 1 not-connected10032 disabled Switch2 (enable) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Router 1700 showing Junk
It certainly sounds like Hyperterminal settings need to be changed. Some people fiddle with the config-register on their routers and end up changing the baud rate (to 2400, 4800, etc.) Word to the wise, though... if you change your baud rate in HYPERTERMINAL then you have to 'disconnect' and 're-connect' for the settings to take effect. Simply changing the baud rate didn't fix the communications problem until I did the disconnect/re-connect. Paul Hitesh Pathak [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Dear All, I'm having a problem with my 1700 series router. The problem is whenever I start my router it shows continously junk characters on the console. Nothing seems to be working. i have tried changing diff PC as well as console cable. Also I have checked for terminal settings like Baud rate , stop bits , Flow control etceverything is perfect. I am using windows 98 as a terminal (Hyper Terminal). Can anyone help me on this?can it be a DRAM corruption problem. Router has 8 mb of DRAM. many thanks in advance. Get free email and a permanent address at http://www.netaddress.com/?N=1 _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: BCMSN Questions - Pls Help
Q1 should be D - 1900 is too small and only 10MB - not good for LARGE graphic files Q2- check the log -Original Message- From: Giggsy [mailto:[EMAIL PROTECTED]] Sent: 02 January 2001 15:56 To: [EMAIL PROTECTED] Subject: BCMSN Questions - Pls Help Hi While i am preparing for my Switching 2.0 Exam, i encounter the following 2 questions while i do the pracice exams which have different answers. Would appreciate if someone could enlighten me what should be the CORRECT answer. Question 1 == The ACME company is a small manufacturing company that wants to interconnect users on multiple floors in the same building. To date, the company has only 15 employees but plans to triple in number in the next year. Users require access to large graphic files on the workgroup servers. What is the most appropriate device for the access layer? A. Catalyst 8500 series switch B. Catalyst 5500 series switch with an internal RSM C. Catalyst 1900 series switch with 10 BaseT ports D. Catalyst 2900 series switch with 100 BaseTX ports COLT said that the answer should be D BUT the course book's answer is C. So which one should it be??? Question 2 === how to find out what error messages were being sent to the other out-bands besides the console port. So what is the answer for this? Hope someone can help. Thanks Regards _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
DRAM Upgrades for 1601R
Hi colleagues, I have two 1601R routers, and I want to upgrade them from their standard 8MB DRAM to 16MB DRAM. I have a few questions about this: 1. Is the DRAM the same for the entire 1600 series ? So can I use the DRAM form a 1603R for the 1601R ? 2. When I buy an additional 8MB of DRAM, can I add that on without problems to the already existing (standard) 8MB in the 1601R ? (I am referring to the problems that exist with PCs, when the PC needs matching SIMMs). Thanks for your help in advance. Regards, Georg Pauwen _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
AUX Port
I have a Cisco 2511 Access Server. I want to connect to the 2511 via Modem. I have an old Motorola 14.4 modem. The aux port has the ffg config: line aux 0 login password cisco modem inout transport input all I have the phone line plugged into the Modem (where it says TO WALL) and I have the Parallel connector (Modem) from Cisco's console kit plugged into the Modem Parallel Port. Then I have a regular Cisco console cable running from the modem to the aux port. When I call the number it just rings and rings. The modem does not answer. What am I doing wrong or what am I not doing? All help appreciated. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: BCMSN Questions - Pls Help
Hi While i am preparing for my Switching 2.0 Exam, i encounter the following 2 questions while i do the pracice exams which have different answers. Would appreciate if someone could enlighten me what should be the CORRECT answer. Question 1 == The ACME company is a small manufacturing company that wants to interconnect users on multiple floors in the same building. To date, the company has only 15 employees but plans to triple in number in the next year. Users require access to large graphic files on the workgroup servers. What is the most appropriate device for the access layer? A. Catalyst 8500 series switch B. Catalyst 5500 series switch with an internal RSM C. Catalyst 1900 series switch with 10 BaseT ports D. Catalyst 2900 series switch with 100 BaseTX ports COLT said that the answer should be D BUT the course book's answer is C. So which one should it be??? Seriously, what do you think is the best answer? Why? Why not? Knowing which test answer is "right" is less important than knowing how the answer is determined. Have you looked at the dates of both and thought that both might be correct, reflecting switch pricing at the time of publication? Question 2 === how to find out what error messages were being sent to the other out-bands besides the console port. So what is the answer for this? Seriously, what do you think is the best answer? Why? Why not? Not quite sure what you mean by an out-band. Hope someone can help. Thanks Regards _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: How to verify port speed and CIR
Here is an example of the output from sh fram map command. It will only work if you are using cisco lmi. Router#sh fram map Serial0/0.11 (up): point-to-point dlci, dlci 45(0x2D,0x8D0), broadcast, IETF, BW = 32000 status defined, active Serial0/0.12 (up): point-to-point dlci, dlci 40(0x28,0x880), broadcast, IETF, BW = 19200 status defined, active [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hello Clayton Dennis, Could you provide me sample output of "SH FRAME MAP" since i could not find any indication on CIR in my lab setup. thanx, -Original Message- From: Clayton Price [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 02, 2001 9:35 AM To: [EMAIL PROTECTED] Subject: Re: How to verify port speed and CIR I was thinking the same thing as Dennis. "Jim Bond" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hello, We have a frame relay link with 512K/256K. How do I verify port speed is 512K and CIR is 256K? I used some tools, like MRTG, but I don't think it shows the real speed. Thanks in advance. Jim __ Do You Yahoo!? Yahoo! Photos - Share your holiday photos online! http://photos.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
PIX failover
I have couple of 520 firewalls ordered a while back but I don't know if is a way to check if they are in failover bundle. To be more specific , I have one up and running but I would like to install the failover and I don't which one is ( I have other three ordered for other projects). I think it might be a way of checking on Cisco's website by having the serial number of the main firewall and then I can get the the serial number of the failover. Thanks and Happy New Year ! Florin Mechetiuc [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Lab trade
Hi group I have booked lab test in Beijing/China on 5th of Feb. I want to postpone the test to March or Apirl, anyone wants to trade let me know Thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: BCMSN Questions - Pls Help
In addition to just getting the "right" answers I would suggest doing some research. Go to www.cisco.com, under Prodcuts and Technologies select Switches. You will be presented with a top level description of Cisco's switch line and many links to explore. Learning HOW to figure out the answers will be important on the job. Right away you see that the 8500 series switch is an ATM switch, so you can throw that one out. The 1900 series is fixed at 24 ports maximum (the two 100 Mbps ports are generally used for uplinks). The question points to a backbone switch solution with the keywords "multiple floors" and the desire to expand to 45 ports. Although there is a 2948 (48 ports) and a 2980 (80 ports) most of the Cisco training literature suggests the use of a Catalyst 5500 (or 6500) as a backbone series switch. Giggsy wrote: Hi While i am preparing for my Switching 2.0 Exam, i encounter the following 2 questions while i do the pracice exams which have different answers. Would appreciate if someone could enlighten me what should be the CORRECT answer. Question 1 == The ACME company is a small manufacturing company that wants to interconnect users on multiple floors in the same building. To date, the company has only 15 employees but plans to triple in number in the next year. Users require access to large graphic files on the workgroup servers. What is the most appropriate device for the access layer? A. Catalyst 8500 series switch B. Catalyst 5500 series switch with an internal RSM C. Catalyst 1900 series switch with 10 BaseT ports D. Catalyst 2900 series switch with 100 BaseTX ports COLT said that the answer should be D BUT the course book's answer is C. So which one should it be??? Question 2 === how to find out what error messages were being sent to the other out-bands besides the console port. So what is the answer for this? Hope someone can help. Thanks Regards _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: PIX failover
If you do sh ver from enable mode you get :- PIX_TH_BB# sh ver PIX Version 4.4(4) Compiled on Thu 06-Jan-00 16:07 by pixbuild PIX BIOS (4.0) #0: Tue May 18 16:29:54 PDT 1999 PIX_TH_BB up 104 days 21 hours Hardware: PIX-515, 64 MB RAM, CPU Pentium 200 MHz Flash strata @ base 0x300 0: ethernet0: address is 0050.54ff.382e, irq 9 1: ethernet1: address is 0050.54ff.382f, irq 7 Licensed Options: Failover: Enabled IPSec: Disabled Ports allowed: 6 Serial Number: 1234567890 -- Two things that say its a UnRestricted pix. 1) 64Meg of Ram - Restricted pix has only 32meg 2) the Failover option is enabled If you have a Restricted and buy the upgrade you get 32meg of ram and a software patch. Hope this helps Andrew -Original Message- From: Florin Mechetiuc [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 02, 2001 3:22 PM To: [EMAIL PROTECTED] Subject: PIX failover I have couple of 520 firewalls ordered a while back but I don't know if is a way to check if they are in failover bundle. To be more specific , I have one up and running but I would like to install the failover and I don't which one is ( I have other three ordered for other projects). I think it might be a way of checking on Cisco's website by having the serial number of the main firewall and then I can get the the serial number of the failover. Thanks and Happy New Year ! Florin Mechetiuc [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: PIX failover
Of course the REAL test is to unplug one of them once you are certain it is configured properly to test the failover and see first hand how it reacts by viewing the routes, protocols and translations to verify that all is working according to plan. Then failover again just to return to the original and prove that it will return after the initial failure has been resolved. Put your results into your operating manual(s) for future reference. -Original Message- From: Andrew Twigger [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 02, 2001 9:55 AM To: 'Florin Mechetiuc'; [EMAIL PROTECTED] Subject: RE: PIX failover If you do sh ver from enable mode you get :- PIX_TH_BB# sh ver PIX Version 4.4(4) Compiled on Thu 06-Jan-00 16:07 by pixbuild PIX BIOS (4.0) #0: Tue May 18 16:29:54 PDT 1999 PIX_TH_BB up 104 days 21 hours Hardware: PIX-515, 64 MB RAM, CPU Pentium 200 MHz Flash strata @ base 0x300 0: ethernet0: address is 0050.54ff.382e, irq 9 1: ethernet1: address is 0050.54ff.382f, irq 7 Licensed Options: Failover: Enabled IPSec: Disabled Ports allowed: 6 Serial Number: 1234567890 -- Two things that say its a UnRestricted pix. 1) 64Meg of Ram - Restricted pix has only 32meg 2) the Failover option is enabled If you have a Restricted and buy the upgrade you get 32meg of ram and a software patch. Hope this helps Andrew -Original Message- From: Florin Mechetiuc [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 02, 2001 3:22 PM To: [EMAIL PROTECTED] Subject: PIX failover I have couple of 520 firewalls ordered a while back but I don't know if is a way to check if they are in failover bundle. To be more specific , I have one up and running but I would like to install the failover and I don't which one is ( I have other three ordered for other projects). I think it might be a way of checking on Cisco's website by having the serial number of the main firewall and then I can get the the serial number of the failover. Thanks and Happy New Year ! Florin Mechetiuc [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Knowledge Net
html DIV Pjeff, i think they are great...i took intro and advanced through them [may99] they were awesomegreat suport structure also especially if you have some equiment to work with...lawrenceBRBR/P/DIV DIV/DIV DIV/DIVgt;From: quot;Jeff Duchinquot;[EMAIL PROTECTED] DIV/DIVgt;Reply-To: quot;Jeff Duchinquot;[EMAIL PROTECTED] DIV/DIVgt;To: [EMAIL PROTECTED] DIV/DIVgt;Subject: Knowledge Net DIV/DIVgt;Date: Sat, 30 Dec 2000 08:01:02 -0500 DIV/DIVgt;Received: from [63.104.50.75] by hotmail.com (3.2) with ESMTP id MHotMailBC17333C00B4D820F3AE3F68324B0C3D17; Sat Dec 30 05:51:36 2000 DIV/DIVgt;Received: from localhost (mail@localhost)by groupstudy.com (8.9.3/8.9.3) with SMTP id JAA30364;Sat, 30 Dec 2000 09:31:37 -0500 DIV/DIVgt;Received: by groupstudy.com (bulk_mailer v1.12); Sat, 30 Dec 2000 09:24:08 -0500 DIV/DIVgt;Received: (from listserver@localhost)by groupstudy.com (8.9.3/8.9.3) id JAA29857GroupStudy Mailer; Sat, 30 Dec 2000 09:24:07 -0500 DIV/DIVgt;Received: (from news@localhost)by groupstudy.com (8.9.3/8.9.3) id JAA29837GroupStudy Mailer; Sat, 30 Dec 2000 09:24:06 -0500 DIV/DIVgt;From [EMAIL PROTECTED] Sat Dec 30 05:52:56 2000 DIV/DIVgt;Path: not-for-mail DIV/DIVgt;Newsgroups: groupstudy.cisco DIV/DIVgt;Organization: GroupStudy.com Discussion Groups DIV/DIVgt;Lines: 6 DIV/DIVgt;Message-ID: lt;92kr66$t4c$[EMAIL PROTECTED]gt; DIV/DIVgt;NNTP-Posting-Host: pppa55-resalefrederickb1-2r7138.dialinx.net DIV/DIVgt;NNTP-Posting-Date: 30 Dec 2000 14:24:06 GMT DIV/DIVgt;X-Priority: 3 DIV/DIVgt;X-MSMail-Priority: Normal DIV/DIVgt;X-Newsreader: Microsoft Outlook Express 5.50.4133.2400 DIV/DIVgt;X-Mimeole: Produced By Microsoft MimeOLE V5.50.4133.2400 DIV/DIVgt;Sender: [EMAIL PROTECTED] DIV/DIVgt;Precedence: bulk DIV/DIVgt; DIV/DIVgt;Has anyone taken any of the classes through Knowledge Net? I just did the DIV/DIVgt;6509 class which was pretty cool. DIV/DIVgt; DIV/DIVgt;Jeff DIV/DIVgt; DIV/DIVgt; DIV/DIVgt;_ DIV/DIVgt;FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html DIV/DIVgt;Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] DIV/DIVbr clear=allhrGet your FREE download of MSN Explorer at a href="http://explorer.msn.com"http://explorer.msn.com/abr/p/html _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Spanning Tree and Root Bridge Question
Switch2 is the root bridge. Bridge ID MAC ADDR and Designated Root are identical, and cost is 0. Switch1's configuration is incorrect. Recheck your VLAN and STP configurations. HTH, Evan -Original Message- From: Giggsy [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 02, 2001 7:59 AM To: [EMAIL PROTECTED] Subject: Spanning Tree and Root Bridge Question Hi Pls refer to my Switch1 Spanning Tree display. Is this my Root Bridge? How come the MAC for Switch1 is 00-00-00-00-00-00? Any problem with this switch? it is so different from Switch2 (pls refer to the below) Switch1 (enable) sh spantree VLAN 1 Spanning tree enabled Spanning tree type ieee Designated Root 00-00-00-00-00-00 Designated Root Priority0 Designated Root Cost0 Designated Root Port1/0 Root Max Age 0 secHello Time 0 sec Forward Delay 0 sec Bridge ID MAC ADDR 00-00-00-00-00-00 Bridge ID Priority 32768 Bridge Max Age 20 secHello Time 2 sec Forward Delay 15 sec Port Vlan Port-StateCost Priority Portfast Channel_id - - -- -- Switch1 (enable) Switch2 (enable) sh spantree VLAN 1 Spanning tree enabled Spanning tree type ieee Designated Root 00-02-fc-10-40-00 Designated Root Priority32768 Designated Root Cost0 Designated Root Port1/0 Root Max Age 20 secHello Time 2 sec Forward Delay 15 sec Bridge ID MAC ADDR 00-02-fc-10-40-00 Bridge ID Priority 32768 Bridge Max Age 20 secHello Time 2 sec Forward Delay 15 sec Port Vlan Port-State Cost Priority Fast-Start Group-Method - - - -- 2/1 1 forwarding1932 disabled 2/9 1 not-connected10032 disabled 2/10 1 not-connected10032 disabled 2/11 1 not-connected10032 disabled 2/12 1 not-connected10032 disabled 2/13 1 not-connected10032 disabled 2/14 1 not-connected10032 disabled 2/15 1 not-connected10032 disabled 2/16 1 not-connected10032 disabled Switch2 (enable) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Syslog
Dear Group, Happy New Year! In the lab, trying to configure syslog. On CCO, an example is given with the command: logging trap informational I try this and the command is accepted but it is not visible after "sh run". I had used "logging history information" but I think this is for SNMP management stations, not syslog. However, that command is accepted and can be seen after "sh run". The router is a 7505 running 11.3(2)T Can anyone lend any insights ? Kevin Wigle _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Syslog
That's because routers don't show default commands. By default, logging trap informational is turned on. Regards, Aaron K. Dixon -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Kevin Wigle Sent: Tuesday, January 02, 2001 10:26 AM To: cisco Subject: Syslog Dear Group, Happy New Year! In the lab, trying to configure syslog. On CCO, an example is given with the command: logging trap informational I try this and the command is accepted but it is not visible after "sh run". I had used "logging history information" but I think this is for SNMP management stations, not syslog. However, that command is accepted and can be seen after "sh run". The router is a 7505 running 11.3(2)T Can anyone lend any insights ? Kevin Wigle _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Foundation 2.0
I have herd and seen so many diffrent times and question so I called cisco training and asked since the details are not on the web site. I was told 90-120 questions in 2hrs and 15min. I was also told question are weighted meaning easy question receive less points and harder question more points making it near impossable to come up with rules of thumb as to what is a passing score before you take the test in tearms of number of question wright or wrong.You must pass all three section to pass exam. I plan on taking this exam this month. I will become a CCNP and CCDP at the same time with this exam. Study hard and good luck. Bryon Phillips CCNA,CCDA ""Terence Lee"" [EMAIL PROTECTED] wrote in message 91lqui$j84$[EMAIL PROTECTED]">news:91lqui$j84$[EMAIL PROTECTED]... Has anyone taken Foundation 2.0 exam? I have research and found different info about it? tcpmag.com says that there are only 76 question. Other sources says 135? Promectric tell me that they are not sure. Does anyone have an idea about time lenght and amount questions? Thanks Terence Lee MSCE, CCNA _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco Catalyst Supervisor Engines
Could someone please explain the difference between the supervisor 1,2,3 engines that go with the Catalyst 5000 and 6500,why are they used and where would I use them ( Core , Distribution, Access). Another question - What would be the easiest way to test serial and ethernet ports on a router with minimal equipment and cables ( what would be needed to do so ). Thanks _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: PIX IOS upgrades and registration questions.
for that matter- has anyone tried to replace a PIX motherboard? I mean, it's just a Pentium-200... ;-) GWA Jason Roysdon wrote: But I believe his question is: does he have to pay to go from 4.x to 5.x? I don't believe so (please correct me if I'm wrong). Also, a PIX 515R is a great deal. They are now allowed to have 3 ports, you just have to get a new license code (free). One thing I'm curious about: Has anyone tried to install a non-Cisco part number NIC? I mean, they're just Intel NICs... -- Jason Roysdon, CCNA, MCSE, CNA, Network+, A+ List email: [EMAIL PROTECTED] Homepage: http://jason.artoo.net/ Cisco resources: http://r2cisco.artoo.net/ "Todd Plambeck" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... You can upgrade 5.1 and 5.2 Pix Software to support ipsec 56k DES for free ( if you have a cisco login ( reseller, consultant, or customer )). The 3DES license has a charge around $1200.00. If you purchase this pix off of ebay you will need to upgrade the PIX Software to 5.1 or 5.2 ( 4.x does not support ipsec ) you will also need 32meg of ram. hope this helps. Todd whatshakin wrote: OK guys,What's the deal with the PIX licensing structure and IOS upgrade process? Looking on CCO, I found docs that mention needing to register with TAC to get IPsec functionality in your PIX. Does anyone know whether this registration costs money? The reason I ask is I am contemplating buying a used PIX off eBay and I want to be sure I can get IPSec functionality without it costing an arm and a leg...the PIX will cost me enough already! I need to know that if I purchase say a PIX 520/515 with 4.X IOS, what the cost will be to upgrade it to 5.X with IPSec features? This will be the deciding factor of whether I buy one that has everything already (means waiting until one shows up) for buying one right away and upgrading it to get the features I want. Thanks a lot. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: PIX and OSPF help! (Revisited)
it is my understanding that a GRE tunnel is required for passing multicast traffic over a VPN link... however I won't even attempt to forge a working config here- you're better off checking CCO for that. GWA Nabil Fares wrote: Greetings, I can't seem to find any information about PIX passing OSPF traffic between routers. I'm trying to install a PIX515 between 2 regional routers. Router-C1--PIX515---Router-C2 Cisco recommends using the OSPF neighbor command, anyone out there used this configuration before? Any information would be helpful. Thanks, Nabil _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cable ???????????????????????????
ensure your cable is smoke-blue in color and has a Manchester (block) connector with male pins... there- now you know to order from Cisco! GWA b1zzei72 wrote: Hello Guys: What kind of Cable will be required to connect Cisco 4000 router to CSU/DSU. I guess it would be V.35 DTE because on CSU there is a V.35 DCE port. Does it vary from vendor to vendor? Do I need to ask carrier about CSU all the time? Does it differ in case of different speed circuit? Or does it matter I have a Frame Relay Circuit or a leased Circuit? Your comments will be appreciated... Thanks... _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
T-1 versus PRI in asynch remote access shelf?
Hello all... I have a remote access shelf (AS5300) with a Quad T1/PRI module. Is there an increase in the level of difficulty of configuration and maintenance associated with using straight T1 over the PRI that would justify pushing for the PRI lines? This assumes that we are going to use 2 T1s for dial in and have our 800 number somehow associated with the AS5300 T1 signaling channel AND that we can use the same system for dial out regardless of our choice of circuit type. I have configured a system with PRIs before and it was a piece of cake. I just don't have any idea of how to point an 800 number at a T1 without an associated phone number. Any help would be appreciated. Mike _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Foundation 2.0
Only if you've taken and passed the CID test will you become a CCDP! -Original Message- From: Bryon [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 02, 2001 10:57 AM To: [EMAIL PROTECTED] Subject: Re: Foundation 2.0 I have herd and seen so many diffrent times and question so I called cisco training and asked since the details are not on the web site. I was told 90-120 questions in 2hrs and 15min. I was also told question are weighted meaning easy question receive less points and harder question more points making it near impossable to come up with rules of thumb as to what is a passing score before you take the test in tearms of number of question wright or wrong.You must pass all three section to pass exam. I plan on taking this exam this month. I will become a CCNP and CCDP at the same time with this exam. Study hard and good luck. Bryon Phillips CCNA,CCDA ""Terence Lee"" [EMAIL PROTECTED] wrote in message 91lqui$j84$[EMAIL PROTECTED]">news:91lqui$j84$[EMAIL PROTECTED]... Has anyone taken Foundation 2.0 exam? I have research and found different info about it? tcpmag.com says that there are only 76 question. Other sources says 135? Promectric tell me that they are not sure. Does anyone have an idea about time lenght and amount questions? Thanks Terence Lee MSCE, CCNA _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: PIX and OSPF help! (Revisited)
You can always check: http://www.cisco.com/warp/public/471/top_issues/vpn/vpn_index.shtml There is a very large ( 2 meg plus ) document on CCO called ipsc_dg.pdf IPSec Design guide. You get to it through the www.cisco.com/tac link, but it can be a bit indirect, and the actual link to the document off the tac page is broken. I haven't tried in a while to download this document. You may need a CCO login to do so. Over 300 pages and tons of configuration examples. HTH Chuck -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of gwakin Sent: Tuesday, January 02, 2001 9:19 AM To: [EMAIL PROTECTED] Subject:Re: PIX and OSPF help! (Revisited) it is my understanding that a GRE tunnel is required for passing multicast traffic over a VPN link... however I won't even attempt to forge a working config here- you're better off checking CCO for that. GWA Nabil Fares wrote: Greetings, I can't seem to find any information about PIX passing OSPF traffic between routers. I'm trying to install a PIX515 between 2 regional routers. Router-C1--PIX515---Router-C2 Cisco recommends using the OSPF neighbor command, anyone out there used this configuration before? Any information would be helpful. Thanks, Nabil _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE Lab Equipment for sale...
I am selling the equipment in my CCIE rack if anyone is interested separately. Here is what I am asking for the units. (1) 2610 24/8 (No Wics) $1100 (1) 2610 32/8 (No Wics) $1200 (2) 2503 8/8 $600 (each) (1) CS-516 $500 (1) Catalyst 2901$1900 (1) Teltone ISDN Simulator $1500 Misc (2) NM-1V$500 (each) (1) FXO WIC $150 (1) FXS WIC $150 (2) WIC-1T $250 (each) (1) 4000 4T $500 I prefer Pay Pal and will only ship within the US. Buyer pays shipping. Please email me if you have any questions. Thank you... -Eddie Eddie M. Parra, CCIE# 6428 Professional Services Project Engineer II | |GCOE Customer Core Design Team ||| ||| Virtual Office: (954) 455-8161 .|. .|. Fax: (954) 458-8148 / eFax (413) 845-5684 .:|:.:|:. Cellular: (954) 647-3656 C i s c o S y s t e m s Email Page: [EMAIL PROTECTED] Email: [EMAIL PROTECTED] "Empowering the Internet Generation" _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: AUX Port
Hey, Throw in the following and see what happens: speed 19200 modem type autoconfigure this should set the AA on the modem. Paul "Austin" [EMAIL PROTECTED] wrote in message 92ssgt$rg2$[EMAIL PROTECTED]">news:92ssgt$rg2$[EMAIL PROTECTED]... I have a Cisco 2511 Access Server. I want to connect to the 2511 via Modem. I have an old Motorola 14.4 modem. The aux port has the ffg config: line aux 0 login password cisco modem inout transport input all I have the phone line plugged into the Modem (where it says TO WALL) and I have the Parallel connector (Modem) from Cisco's console kit plugged into the Modem Parallel Port. Then I have a regular Cisco console cable running from the modem to the aux port. When I call the number it just rings and rings. The modem does not answer. What am I doing wrong or what am I not doing? All help appreciated. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Syslog
cool, all the CCO pages I had seen using the command did not mention the default. just found the command syntax listing and there it was "informational". thanks Kevin Wigle - Original Message - From: "Aaron K. Dixon" [EMAIL PROTECTED] To: "Kevin Wigle" [EMAIL PROTECTED]; "cisco" [EMAIL PROTECTED] Sent: Tuesday, January 02, 2001 11:45 AM Subject: RE: Syslog That's because routers don't show default commands. By default, logging trap informational is turned on. Regards, Aaron K. Dixon -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Kevin Wigle Sent: Tuesday, January 02, 2001 10:26 AM To: cisco Subject: Syslog Dear Group, Happy New Year! In the lab, trying to configure syslog. On CCO, an example is given with the command: logging trap informational I try this and the command is accepted but it is not visible after "sh run". I had used "logging history information" but I think this is for SNMP management stations, not syslog. However, that command is accepted and can be seen after "sh run". The router is a 7505 running 11.3(2)T Can anyone lend any insights ? Kevin Wigle _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco 3600 Pri ISDN connection problem
I've inherited a Cisco 3600 which originally had a Pri rate ISDN interface and a network interface. This was setup and running to not only dial our ISP but also to dial into some other customers via ISDN. I was told that 15 isdn channels fed into this interface. We then moved over to a leased line and purchased an X.21 card. At the same time we added a firewall. Due to the configuration of the firewall we lost the ability to dial into our customers (The router was no longer reachable from our network as the firewall had hidden it!) We now have a different firewall and the router is visible again. I'm trying to resurrect the ISDN connections but I am not having much fun ! I need some help in debugging it to try and find out what is going on. I issued the commands debug isdn q921 and debug isdn q931 and then when I ping something that has a route entry and dialer setup I get the following debug output interprod1-1-gw#ping 192.168.88.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.88.1, timeout is 2 seconds: 01:38:50: Serial1/0:15: rotor dialout [priority] 01:38:50: Serial1/0:15: Dialing cause ip (s=193.xxx.xxx.xx, d=192.168.88.1) 01:38:50: Serial1/0:15: Attempting to dial 90171xx.. 01:38:54: %ISDN-6-LAYER2DOWN: Layer 2 for Interface Se1/0:15, TEI 0 changed to d own 01:38:54: ISDN Se1/0:15: Event: received NL_REL_IND 01:38:54: Serial1/0:15: wait for carrier timeout, call id=0x800E. 01:38:56: Serial1/0:15: rotor dialout [priority] 01:38:56: Serial1/0:15: Dialing cause ip (s=193.xxx.xxx.xx, d=192.168.88.1) 01:38:56: Serial1/0:15: Attempting to dial 90171xx.. Success rate is 0 percent (0/5) interprod1-1-gw# 01:39:00: %ISDN-6-LAYER2DOWN: Layer 2 for Interface Se1/0:15, TEI 0 changed to d own 01:39:00: ISDN Se1/0:15: Event: received NL_REL_IND 01:39:00: Serial1/0:15: wait for carrier timeout, call id=0x800F When I do show int The serial interface for serial 1/0:0 to serial 1/0:14 is down,line protocol is down but for serial 1/0:15 it is up, line protocol is up (spoofing) Sho isdn status gives me ISDN Serial1/0:15 interface Layer 1 Status: ACTIVE Layer 2 Status: TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED Layer 3 Status: 0 Active Layer 3 Call(s) Activated dsl 0 CCBs = 0 Number of L2 Discards = 129, L2D_Task Discards = 53 Total Allocated ISDN CCBs = 0 Does any of this shed any light on why it does n't work. What other things do I need to look at. As you've probably realised I'm new to this Cisco stuff ! The only other thing I can remember is when the firewall people reconfigured the Cisco they did have some problems with Timeslots. Are these important ! If any more info is require let me know. As an aside can anyone point in the direction of a good book on configuring Cisco routers ? TIA Andy _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
connect the ISP
Hi guys: We are a small ISP, just using static routing connect the mother ISP, the mother ISP assign a class C address to us, I want to know how the mother ISP locate the Class c networking , just using static routing? Need they redistribute the static to their dynamic routing (for example OSPF) in order to the internet router know the class c network,? Did the mother ISP create the stub area, then assign the lots of ip address to stub area ,if so how to create the stub area by static routing? Anyone can give me some configuration, can the "default-information originate always" command redistribute the static route(locate our class c network) into the ospf routing domain? in order to let the internet router know the C class network Thanks in advice __ Do You Yahoo!? Yahoo! Photos - Share your holiday photos online! http://photos.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: PIX IOS upgrades and registration questions.
The Pix OS upgrade is not free with a CCO logon. It is free with Smart Net maintenance on the Pix appliance, well kinda free since you are paying annually for the maintenance contract. You would technically be in violation of the license agreement if you download new Pix software without Smart Net maintenance. That said, make sure that if you upgrade, upgrade to 5.2. I would skip 5.1. 5.2 adds support for gratuitous ARPs (much needed if using failover in a switched environment) as well as support for the VPN 3000 client (i.e. mode config). There are many more additions which are listed on CCO. Chris Lemagie Systems Engineer Cisco Systems Seattle Commercial Region (425) 468-0959 [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of gwakin Sent: Tuesday, January 02, 2001 9:11 AM To: [EMAIL PROTECTED] Subject: Re: PIX IOS upgrades and registration questions. for that matter- has anyone tried to replace a PIX motherboard? I mean, it's just a Pentium-200... ;-) GWA Jason Roysdon wrote: But I believe his question is: does he have to pay to go from 4.x to 5.x? I don't believe so (please correct me if I'm wrong). Also, a PIX 515R is a great deal. They are now allowed to have 3 ports, you just have to get a new license code (free). One thing I'm curious about: Has anyone tried to install a non-Cisco part number NIC? I mean, they're just Intel NICs... -- Jason Roysdon, CCNA, MCSE, CNA, Network+, A+ List email: [EMAIL PROTECTED] Homepage: http://jason.artoo.net/ Cisco resources: http://r2cisco.artoo.net/ "Todd Plambeck" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... You can upgrade 5.1 and 5.2 Pix Software to support ipsec 56k DES for free ( if you have a cisco login ( reseller, consultant, or customer )). The 3DES license has a charge around $1200.00. If you purchase this pix off of ebay you will need to upgrade the PIX Software to 5.1 or 5.2 ( 4.x does not support ipsec ) you will also need 32meg of ram. hope this helps. Todd whatshakin wrote: OK guys,What's the deal with the PIX licensing structure and IOS upgrade process? Looking on CCO, I found docs that mention needing to register with TAC to get IPsec functionality in your PIX. Does anyone know whether this registration costs money? The reason I ask is I am contemplating buying a used PIX off eBay and I want to be sure I can get IPSec functionality without it costing an arm and a leg...the PIX will cost me enough already! I need to know that if I purchase say a PIX 520/515 with 4.X IOS, what the cost will be to upgrade it to 5.X with IPSec features? This will be the deciding factor of whether I buy one that has everything already (means waiting until one shows up) for buying one right away and upgrading it to get the features I want. Thanks a lot. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: T-1 versus PRI in asynch remote access shelf?
Nevermind... I found the answer I was looking for. Thanks all.. Mike -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Michael Vicchiollo Sent: Tuesday, January 02, 2001 12:35 PM To: [EMAIL PROTECTED] Subject: T-1 versus PRI in asynch remote access shelf? Hello all... I have a remote access shelf (AS5300) with a Quad T1/PRI module. Is there an increase in the level of difficulty of configuration and maintenance associated with using straight T1 over the PRI that would justify pushing for the PRI lines? This assumes that we are going to use 2 T1s for dial in and have our 800 number somehow associated with the AS5300 T1 signaling channel AND that we can use the same system for dial out regardless of our choice of circuit type. I have configured a system with PRIs before and it was a piece of cake. I just don't have any idea of how to point an 800 number at a T1 without an associated phone number. Any help would be appreciated. Mike _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cable ???????????????????????????
If your CSU is of V.35 DCE (female) then you are safe to use the V35 DTE (male) cable. Cisco 4000 also supports other types of connectors, like V.24 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of gwakin Sent: Wednesday, January 03, 2001 1:23 AM To: [EMAIL PROTECTED] Subject:Re: Cable ??? ensure your cable is smoke-blue in color and has a Manchester (block) connector with male pins... there- now you know to order from Cisco! GWA b1zzei72 wrote: Hello Guys: What kind of Cable will be required to connect Cisco 4000 router to CSU/DSU. I guess it would be V.35 DTE because on CSU there is a V.35 DCE port. Does it vary from vendor to vendor? Do I need to ask carrier about CSU all the time? Does it differ in case of different speed circuit? Or does it matter I have a Frame Relay Circuit or a leased Circuit? Your comments will be appreciated... Thanks... _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: PIX VPNs
Here is an example of a 3-way PIX VPN (DES) using pre-shared keys. I used these as a template for setting up a VPN for a client of mine. Rik Guyler Austin wrote: I am looking for sample configs on PIX to PIX VPNs. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] , This mail was processed by Mail essentials for Exchange/SMTP, the email security management gateway. Mail essentials adds content checking, email encryption, anti spam, anti virus, attachment compression, personalised auto responders, archiving and more to your Microsoft Exchange Server or SMTP mail server. For more information visit http://www.mailessentials.com nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password 8Ry2YjIyt7RRXU24 encrypted passwd 2KFQnbNIdI.2KYOU encrypted hostname pix2 fixup protocol ftp 21 fixup protocol http 80 fixup protocol h323 1720 fixup protocol rsh 514 fixup protocol smtp 25 fixup protocol sqlnet 1521 names access-list 100 permit ip 10.1.2.0 255.255.255.0 10.1.1.0 255.255.255.0 access-list 101 permit ip 10.1.2.0 255.255.255.0 10.1.3.0 255.255.255.0 access-list nonat permit ip 10.1.2.0 255.255.255.0 10.1.1.0 255.255.255.0 access-list nonat permit ip 10.1.2.0 255.255.255.0 10.1.3.0 255.255.255.0 pager lines 24 logging on no logging timestamp no logging standby no logging console no logging monitor no logging buffered no logging trap no logging history logging facility 20 logging queue 512 interface ethernet0 10baset interface ethernet1 10baset mtu outside 1500 mtu inside 1500 ip address outside 192.168.1.20 255.255.255.0 ip address inside 10.1.2.1 255.255.255.0 arp timeout 14400 global (outside) 1 192.168.1.21-192.168.1.29 nat (inside) 0 access-list nonat nat (inside) 1 0.0.0.0 0.0.0.0 0 0 conduit permit icmp any any route outside 0.0.0.0 0.0.0.0 192.168.1.75 1 timeout xlate 3:00:00 conn 1:00:00 half-closed 0:10:00 udp 0:02:00 timeout rpc 0:10:00 h323 0:05:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server RADIUS protocol radius no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable sysopt connection permit-ipsec crypto ipsec transform-set myset esp-des esp-md5-hmac crypto map mymap 10 ipsec-isakmp crypto map mymap 10 match address 100 crypto map mymap 10 set peer 192.168.1.10 crypto map mymap 10 set transform-set myset crypto map mymap 20 ipsec-isakmp crypto map mymap 20 match address 101 crypto map mymap 20 set peer 192.168.1.30 crypto map mymap 20 set transform-set myset crypto map mymap interface outside isakmp enable outside isakmp key cisco123 address 192.168.1.10 netmask 255.255.255.255 isakmp key cisco123 address 192.168.1.30 netmask 255.255.255.255 isakmp identity address isakmp policy 10 authentication pre-share isakmp policy 10 encryption des isakmp policy 10 hash md5 isakmp policy 10 group 1 isakmp policy 10 lifetime 86400 telnet 10.1.1.0 255.255.255.0 inside telnet timeout 60 terminal width 80 nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password 8Ry2YjIyt7RRXU24 encrypted passwd 2KFQnbNIdI.2KYOU encrypted hostname pix1 fixup protocol ftp 21 fixup protocol http 80 fixup protocol h323 1720 fixup protocol rsh 514 fixup protocol smtp 25 fixup protocol sqlnet 1521 names access-list 100 permit ip 10.1.1.0 255.255.255.0 10.1.2.0 255.255.255.0 access-list 101 permit ip 10.1.1.0 255.255.255.0 10.1.3.0 255.255.255.0 access-list nonat permit ip 10.1.1.0 255.255.255.0 10.1.2.0 255.255.255.0 access-list nonat permit ip 10.1.1.0 255.255.255.0 10.1.3.0 255.255.255.0 pager lines 24 logging on no logging timestamp no logging standby no logging console no logging monitor no logging buffered no logging trap no logging history logging facility 20 logging queue 512 interface ethernet0 10baset interface ethernet1 10baset mtu outside 1500 mtu inside 1500 ip address outside 192.168.1.10 255.255.255.0 ip address inside 10.1.1.1 255.255.255.0 arp timeout 14400 global (outside) 1 192.168.1.11-192.168.1.19 nat (inside) 0 access-list nonat nat (inside) 1 0.0.0.0 0.0.0.0 0 0 conduit permit icmp any any route outside 0.0.0.0 0.0.0.0 192.168.1.75 1 timeout xlate 3:00:00 conn 1:00:00 half-closed 0:10:00 udp 0:02:00 timeout rpc 0:10:00 h323 0:05:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server RADIUS protocol radius no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable sysopt connection permit-ipsec crypto ipsec transform-set myset esp-des esp-md5-hmac crypto map mymap 10 ipsec-isakmp crypto map mymap 10 match address 100 crypto map mymap 10
Re: Cisco Certification Digest V2 #916
I will be on vacation until January 8 and out of pager and cell phone range. For all network related issues please contact our Network Operations Center at 800-610-4684. Dan Keller _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Off topic
Dear Friends, Can any one give me wiring diagram for RJ-45 to DB 9 pin out and RJ-45 = to DB 25 pin out. Thanks for help Best regards Naveen _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Off topic
http://www.cisco.com/warp/public/701/14.html -Original Message- From: Naveen Sharma [mailto:[EMAIL PROTECTED]] Sent: Monday, January 01, 2001 10:08 PM To: [EMAIL PROTECTED] Subject: Off topic Dear Friends, Can any one give me wiring diagram for RJ-45 to DB 9 pin out and RJ-45 = to DB 25 pin out. Thanks for help Best regards Naveen _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: BCMSN Questions - Pls Help
Good point. Although the Test Question World did talk about expanding to 45 people and this idea of expandability and multiple floors point to a backbone switch, IMHO. In the Real World often I have had customer who popluate the Catalyst 5500 (more often a 6500 these days) with GigE and GBICs and run them via fiber to 3548's on each floor. -Jonathan Jim Dixon wrote: Hi Jonathan, The question at the end of the description states ACCESS layer as the layer for which we are to select the switch. While I don't disagree totally with your assessment of what should be selected, I think the answer should be 2900 series just more than one and if the truth be known the 3500 series might fit even better although IT is not listed as an option. Jim -Original Message- From: Jonathan Hays [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 02, 2001 9:46 AM Cc: [EMAIL PROTECTED] Subject: Re: BCMSN Questions - Pls Help In addition to just getting the "right" answers I would suggest doing some research. Go to www.cisco.com, under Prodcuts and Technologies select Switches. You will be presented with a top level description of Cisco's switch line and many links to explore. Learning HOW to figure out the answers will be important on the job. Right away you see that the 8500 series switch is an ATM switch, so you can throw that one out. The 1900 series is fixed at 24 ports maximum (the two 100 Mbps ports are generally used for uplinks). The question points to a backbone switch solution with the keywords "multiple floors" and the desire to expand to 45 ports. Although there is a 2948 (48 ports) and a 2980 (80 ports) most of the Cisco training literature suggests the use of a Catalyst 5500 (or 6500) as a backbone series switch. Giggsy wrote: Hi While i am preparing for my Switching 2.0 Exam, i encounter the following 2 questions while i do the pracice exams which have different answers. Would appreciate if someone could enlighten me what should be the CORRECT answer. Question 1 == The ACME company is a small manufacturing company that wants to interconnect users on multiple floors in the same building. To date, the company has only 15 employees but plans to triple in number in the next year. Users require access to large graphic files on the workgroup servers. What is the most appropriate device for the access layer? A. Catalyst 8500 series switch B. Catalyst 5500 series switch with an internal RSM C. Catalyst 1900 series switch with 10 BaseT ports D. Catalyst 2900 series switch with 100 BaseTX ports COLT said that the answer should be D BUT the course book's answer is C. So which one should it be??? Question 2 === how to find out what error messages were being sent to the other out-bands besides the console port. So what is the answer for this? Hope someone can help. Thanks Regards _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Using uplink to connect to server
Knowing that this is not common practice, but I was wondering if it was possible to connect a "host" (server) to one of the uplink ports on a switch? Was wondering if there would be any difficulties involved with this? Has ayone attempted this uncommon practice? Thanks. Rick Watson Network Engineer OUSD(Comptroller) 703.697.5710 [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
2501 not booting properly
Hello colleagues, I have a 2501 router that apparently doesn't boot anymore; when I turn it off and on, the system/ok LED doesn't blink and immediately goes to 'steady'. I cannot get a router prompt through the console port, all I get are some 'rubbish' characters. Has any of you seen something similar yet ? I am used to see the system/ok LED blinking during the boot process and then go to steady. Can that indicate a memory and/or hardware failure ? Regards, Georg Pauwen _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: problem on FR
What is the status of the main interface you are configuring this Frame-relay subinterface on? I have typically seen a "deleted" status for a PVC to mean that the PVC within the frame-relay net you are connecting to is not built. "Frank" [EMAIL PROTECTED] wrote in message 92s7rc$4f2$[EMAIL PROTECTED]">news:92s7rc$4f2$[EMAIL PROTECTED]... I am configuring a multichannel E1 board on 7513 to connect with a FR net. when i use SH FRAME PVC ,i got the the PVC status is "deleted " or "inactive" what acturally does it mean ? as far as i know ,"deleted" means the line between router and FR switch is not OK, and "inactive" means OK. i also got the following infor when i unplug the line from the router and then plug it back. (i opened deb frame packet and deb frame event on) serial4/0/0:0 broadcast search serial4/0/0:0 encaps failed on broadcast for link 7(IP) what does it mean? Any help is appreciated. Frank _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Using uplink to connect to server
Yes... Thanks, Chris Boyd, CCNA Network Support Alex Lee, Inc. 120 4th St SW Hickory NC 28603 828-323-4103 www.alexlee.com - Original Message - From: "Watson, Rick, , OUSDC" [EMAIL PROTECTED] To: "[EMAIL PROTECTED] (E-mail)" [EMAIL PROTECTED] Sent: Tuesday, January 02, 2001 1:54 PM Subject: Using uplink to connect to server Knowing that this is not common practice, but I was wondering if it was possible to connect a "host" (server) to one of the uplink ports on a switch? Was wondering if there would be any difficulties involved with this? Has ayone attempted this uncommon practice? Thanks. Rick Watson Network Engineer OUSD(Comptroller) 703.697.5710 [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Simple question
Those are symbols for use with Regular expressions. ^ = Matches the beginning of the input string $ = Matches the end of the input string What your example is doing is permitting advertisement(s) for any BGP learned networks whose path either begins or ends with 100. In other words, accept advertisements that were originated from AS 100. Mas mak [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi, For example, ip as-path access-list 20 permit ^100$ What is the ^$ stands for? Thanks mak _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: about connect the ISP
The address space you were assigned from the Mother ISP is more than likely going to be out of a larger block the Mother ISP was assigned from ARIN. Say your /24 prefix (Class C) is part of a /16 (Class B) that they own.. They only announce the /16 to their peers unless a specific situation arises where they'd need to send the /24. All of the Major ISP's and org's follow this procedure and that's why we don't have 9,000,000 routes in our routing tables.. :).. Route aggregation is the term.. So to answer your question.. :).. Mother ISP assigns /24 to you statically. Then they redistribute that throughout their Autonomous Systems using a Dynamic routing protocol so all of the internal routers know the path to the router you're connect to, and then only announce the /16 to their peers. Everyone knows how to get to everyone else.. Hope that answers your question. Mas "Tony van Ree" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi, We provide a service to thousands of clients with anything from full class "B" to 4 addresses out of a class "C". In a nutshell you place a default static back to the supplier. The supplier has a static pointing your class "C" down your link. In a number of places this is managed by auto type processes for example going into a customer area and adding the routes you own to your service. The process then updates the router from the supplier to you. Teunis Hobart, Tasmania Australia On Saturday, December 30, 2000 at 07:49:57 AM, gary gary wrote: Hi guys: We are a small ISP, just using static routing connect the mother ISP, the mother ISP assign a class C address to us, I want to know how the mother ISP locate the Class c networking , just using static routing? Need they redistribute the static to their dynamic routing (for example OSPF) in order to the internet router know the class c network,? Did the mother ISP create the stub area, then assign the lots of ip address to stub area ,if so how to create the stub area by static routing? Anyone can give me some configuration, Thanks in advice gary __ Do You Yahoo!? Yahoo! Photos - Share your holiday photos online! http://photos.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- www.tasmail.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Upgrade switch IOS on a 6500 via console
Can anyone provide me with info on how to do this. Thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: PIX VPNs
Geroge, Interesting perspective. However, depending upon the VPN protocol you are using it may or may not provide a connectivity solution. Since we are talking about the PIX firewall, we must be talking about IPSec. I don't see IPSec as a connectivity solution, it is a security solution. There are many ways to provide security, the most obvious is encryption. Another method for providing security would be to hide the real ip addresses of my Intranet. By using the private address range (RFC 1918) on my Intranet and translating outgoing packets to an Internet routable address, I almost guarantee that no one can send a packet directly to any of the computers on my intranet without going through my firewall or VPN. VPNs can solve many problems, but connectivity is not always one of them. There are certain VPN protocols such as PPTP, L2F, L2TP that can give you a connectivity solution. If you want to run a routing protocol through a VPN, specifically IPSec, then you do need to setup a GRE tunnel. The way I see it GRE tunnels are a connectivity solution, because it allows you to transport protocols that are not routable across an IP only backbone. Keep in mind that GRE tunnels are not a security solution, which is why you might encrypt a GRE tunnel with IPSec. If you don't care about hiding your address space from the rest of the world and thus want a solution that doesn't require two distinct address spaces, why focus on a PIX firewall, especially since it's primary goal is to hide your address space. Instead, why not just terminate an IPSec tunnel between two VPN accelerated routers? (They don't need to be accelerated, but depending upon the projected bandwidth utilization they might need to be). There are many routers that can be used to fit any number of requirements. It all just depends upon that famous quote "what problem are we trying to solve". As my father always said.."the right tool for the right job" :-) So, where was I? Oh..right...Austin...here is the link you are looking for: http://www.cisco.com/warp/public/110/38.html HTH, AQ At 11:40 AM 1/2/01, gwakin wrote: I feel led to tell you that, unless IOS or PIX software has been enhanced since last I dealt with this issue, you will need to ensure that you're running different IP schemas on each PIX, and preferably non-translated schemas at that. Also, if you're planning to run a routing protocol such as OSPF across the VPN link, you will need to look at setting up a GRE tunnel to accomplish that purpose. Needless to say, Cisco needs to do a better job of due diligence on this VPN solution. GWA Austin wrote: I am looking for sample configs on PIX to PIX VPNs. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ** Adam Quiggle Senior Network Engineer MCI Worldcom/NOC/BP Amoco [EMAIL PROTECTED] ** _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco Catalyst Supervisor Engines
Here's what I remember (anyone please add thoughts): --- Catalyst 5000/5500 --- Supervisor I Engine (original) -- The supervisor that is used in a 5000 or 5500 chassis. 1.2Gb/s bandwidth. No hot-standby. Supervisor II Engine -- Hot-standby capable supervisor. 1.2Gb/s bandwidth. Used in a 5000/5500. 5500 series required for hot-standby. Uplinks EtherChannel capable. Supervisor III Engine -- Hot-standby capable supervisor. Utilized the Phoenix ASIC that connects three 1.2Gb/s backplanes together. 3.6Gb/s aggregate bandwidth. Net Flow Feature Card (NFFC) available as an option that provides wire-rate layer-3 switching. Supervisor IIIG Engine -- Hot-standby capable supervisor. Phoenix NFFC equipped. Gigabit Ethernet uplinks (GBIC). --- Catalyst 6000/6500 --- Supervisor I -- Original supervisor engine. 16Gb/s switching capacity (62.5 MHz x 256 bit). Layer 2 only. Used with the MSM to provide layer-3 capability (6 Mpps w/64 byte packets). Two GBIC. Supervisor IA -- Updated supervisor engine. Policy Feature Card (PFC)/Multilayer Switch Feature Card (MSFC) options allow native layer-3 switching without a router module. PFC is similar to NFFC, but with enhancements that allow access control lists to be used on the MSFC; offers greater performance (15Mpps). Supervisor II -- Updated supervisor engine. When utilized with PFC2 MSFC2, provides Cisco Express Forwarding (CEF) layer 3 switching. Upgradable to 256 Gb/s capacity with Switch Fabric Module (SFM) on Catalyst 6500s. --- Shane Stockman [EMAIL PROTECTED] wrote: Could someone please explain the difference between the supervisor 1,2,3 engines that go with the Catalyst 5000 and 6500,why are they used and where would I use them ( Core , Distribution, Access). Another question - What would be the easiest way to test serial and ethernet ports on a router with minimal equipment and cables ( what would be needed to do so ). Thanks _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Photos - Share your holiday photos online! http://photos.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: problem on FR
PVC deleted - your router does not see the DLCI that you have configured ( Check to see if you are getting lmi from the switch, if yes then check your DLCI's or call telco) PVC inactive - your router sees a DLCI on the frame relay but something is stopping it from becomming active (check the configutation on both ends ) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of news.groupstudy.com Sent: Wednesday, January 03, 2001 1:16 AM To: [EMAIL PROTECTED] Subject: Re: problem on FR What is the status of the main interface you are configuring this Frame-relay subinterface on? I have typically seen a "deleted" status for a PVC to mean that the PVC within the frame-relay net you are connecting to is not built. "Frank" [EMAIL PROTECTED] wrote in message 92s7rc$4f2$[EMAIL PROTECTED]">news:92s7rc$4f2$[EMAIL PROTECTED]... I am configuring a multichannel E1 board on 7513 to connect with a FR net. when i use SH FRAME PVC ,i got the the PVC status is "deleted " or "inactive" what acturally does it mean ? as far as i know ,"deleted" means the line between router and FR switch is not OK, and "inactive" means OK. i also got the following infor when i unplug the line from the router and then plug it back. (i opened deb frame packet and deb frame event on) serial4/0/0:0 broadcast search serial4/0/0:0 encaps failed on broadcast for link 7(IP) what does it mean? Any help is appreciated. Frank _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cool DDoS (Distributed Denial of Service) link
At 08:49 AM 1/2/01, Chuck Church wrote: From Network Computing: http://www.nwc.com/1201/1201f1c1.html Indeed, very nicely-written article. The best thing in it was the link to the Cisco site on Unicast Reverse Path Forwarding, which I'd never heard of. (I'd heard of Multicast RPF, but not unicast.) I'm curious, is anyone using Unicast RPF? Does it work well? Any performance problems with it? Here's what it does: "When Unicast RPF is enabled on an interface, the router examines all packets received as input on that interface to make sure that the source address and source interface appear in the routing table and match the interface on which the packet was received. This 'look backwards' ability is available only when Cisco express forwarding (CEF) is enabled on the router, because the lookup relies on the presence of the Forwarding Information Base (FIB). CEF generates the FIB as part of its operation." For more info see: http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/secur_c/scprt5/scdrpf.htm Priscilla Chuck Church CCNP, CCDP, MCNE, MCSE Sr. Network Engineer Magnacom Technologies 140 N. Rt. 303 Valley Cottage, NY 10989 845-267-4000 x218 _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Priscilla Oppenheimer http://www.priscilla.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cool DDoS (Distributed Denial of Service) link
It sounds like an anti-spoofing mechanism, much like not allowing packets from the internet into your network with a source address of your network. This goes a little beyond that by verifying that the source is reachable from the interface it was received on. I've always done this with an access list, which is easy with only 1 connection to the 'Net. Doing it with CEF rather than process switching has got to offer some big performance benefits. Now, if I could only remember which platforms support CEF... Chuck Church CCNP, CCDP, MCNE, MCSE Sr. Network Engineer Magnacom Technologies 140 N. Rt. 303 Valley Cottage, NY 10989 845-267-4000 x218 -Original Message- From: Priscilla Oppenheimer [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 02, 2001 3:58 PM To: Chuck Church; '[EMAIL PROTECTED]' Subject: Re: Cool DDoS (Distributed Denial of Service) link At 08:49 AM 1/2/01, Chuck Church wrote: From Network Computing: http://www.nwc.com/1201/1201f1c1.html Indeed, very nicely-written article. The best thing in it was the link to the Cisco site on Unicast Reverse Path Forwarding, which I'd never heard of. (I'd heard of Multicast RPF, but not unicast.) I'm curious, is anyone using Unicast RPF? Does it work well? Any performance problems with it? Here's what it does: "When Unicast RPF is enabled on an interface, the router examines all packets received as input on that interface to make sure that the source address and source interface appear in the routing table and match the interface on which the packet was received. This 'look backwards' ability is available only when Cisco express forwarding (CEF) is enabled on the router, because the lookup relies on the presence of the Forwarding Information Base (FIB). CEF generates the FIB as part of its operation." For more info see: http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/secu r_c/scprt5/scdrpf.htm Priscilla Chuck Church CCNP, CCDP, MCNE, MCSE Sr. Network Engineer Magnacom Technologies 140 N. Rt. 303 Valley Cottage, NY 10989 845-267-4000 x218 _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Priscilla Oppenheimer http://www.priscilla.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cisco's TFTP Program
I have used Cisco TFTP on Win98/SE sending IOS to a router w/o any problem. What kind of error message are you getting. Trang Nguyen -Original Message- From: Jennifer Mellone [mailto:[EMAIL PROTECTED]] Sent: Friday, December 29, 2000 7:45 PM To: [EMAIL PROTECTED] Subject: Cisco's TFTP Program Hi Gang, Is it me, or has anyone else had this problem using the Cisco TFTP program--- I TFTPed software from my laptop to a switch just fine today. But then I tried to TFTP IOS code from my laptop to a router today. I got an error message (from the TFTP program itself), and the program immediately closed down. I even rebooted the laptop and this did not help. - Jennifer Mellone _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
problem on FR
"deleted" means that the frame relay switch doesn't know about the PVC. "Inactive" means that the frame relay switch knows about the PVC but it isn't working. "active" means you have a working circuit. If you do a 'debug frame lmi', every so often the switch will send a list of PVCs. Deleted PVCs won't show up on the list. Inactive ones will (with a status of 0x0 - active PVCs are 0x2). If you are seeing PVCs in a 'deleted' state, you've either misconfigured the DLCI, or the provider has misconfigured the switch with the wrong DLCI (or the provider has not yet configured the switch). If the PVC is 'inactive', it's hopefully configured with the correct DLCI - but your circuit is not working end to end. Can't help with the encapsulation errors, sorry. It may be simply because your PVC isn't active. JMcL -- Forwarded by Jenny Mcleod/NSO/CSDA on 03/01/2001 08:38 am --- "Frank" [EMAIL PROTECTED]@groupstudy.com on 02/01/2001 07:35:46 pm Please respond to "Frank" [EMAIL PROTECTED] Sent by: [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: problem on FR I am configuring a multichannel E1 board on 7513 to connect with a FR net. when i use SH FRAME PVC ,i got the the PVC status is "deleted " or "inactive" what acturally does it mean ? as far as i know ,"deleted" means the line between router and FR switch is not OK, and "inactive" means OK. i also got the following infor when i unplug the line from the router and then plug it back. (i opened deb frame packet and deb frame event on) serial4/0/0:0 broadcast search serial4/0/0:0 encaps failed on broadcast for link 7(IP) what does it mean? Any help is appreciated. Frank _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Was: help with tacacs authentication -- Now: how did I do this?
This one's a bit old, but I haven't noticed a response to it. Sorry to disappoint you, Jim, but the R2501(boot)# prompt does indeed mean that a configuration register value is not set correctly. Or something else has screwed up. There was a thread recently about the capabilities of routers in boot mode. You might like to check the archives (assuming you didn't sort this out yourself ages ago). JMcL -- Forwarded by Jenny Mcleod/NSO/CSDA on 03/01/2001 09:16 am --- "Croyle, James" [EMAIL PROTECTED]@groupstudy.com on 23/12/2000 07:52:35 pm Please respond to "Croyle, James" [EMAIL PROTECTED] Sent by: [EMAIL PROTECTED] To: "'[EMAIL PROTECTED]'" [EMAIL PROTECTED] cc: Subject: Was: help with tacacs authentication -- Now: how did I do this? Well all, here is the new configuration of my router. Seems one of those commands did work after all. Can anyone tell me which one it was? Also, I chose the hostname R2501, but the prompt is showing R2501(boot)# My experience is with 4000 routers, 5000, 6500 and 3500 switches, and I want to be sure this prompt I have on the 2501 does not have something to do with a configuration register value that is not set correctly. The new scenario when I log in, is a normal secret password gets me right in. Yes, I will be upgrading the IOS, no need to recommend that one. Sorry so verbose, but I wanted to be clear. ;-) Jim Croyle [snipped] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: ISDN LAPD versus PPP
LAPD is used on the ISDN D channel. PPP (or HDLC or whatever) is used on the B channels. SO neither is encapsulated in the other. The Paquet book for BCRAN has a useful table covering what protocols are used at which layers on which channels, which I have attempted to reproduce below... D channel B channel Layer 3 DSS1 (Q.931) IP/IPX Layer 2 LAPD (Q.921) HDLC/PPP/FR/LAPB Layer 1 I.430/I.431/ANSI T1.601 Hope that helps, JMcL -- Forwarded by Jenny Mcleod/NSO/CSDA on 03/01/2001 09:27 am --- "Pierre-Alex" [EMAIL PROTECTED]@groupstudy.com on 30/12/2000 10:45:47 am Please respond to "Pierre-Alex" [EMAIL PROTECTED] Sent by: [EMAIL PROTECTED] To: "Jim Dixon" [EMAIL PROTECTED] "Cisco" [EMAIL PROTECTED] cc: Subject: RE: ISDN LAPD versus PPP Reading between the lines (see bellow) it seems that PPP is NOT encapsulated in LAPD. It looks like PPP starts encapsulating network traffic on its own as soon as LAPD has set up the ISDN call. Please correct me if I am wrong. Thank You. "3.3. Link Dead (physical-layer not ready) The link necessarily begins and ends with this phase. When an external event (such as carrier detection or network administrator configuration) indicates that the physical-layer is ready to be used, PPP will proceed to the Link Establishment phase. During this phase, the LCP automaton (described later) will be in the Initial or Starting states. The transition to the Link Establishment phase will signal an Up event to the LCP automaton." Pierre-Alex -Original Message- From: Jim Dixon [mailto:[EMAIL PROTECTED]] Sent: Friday, December 29, 2000 3:42 PM To: Pierre-Alex Subject: RE: ISDN LAPD versus PPP Here are some RFC's that you might read that might help. http://www.isi.edu/in-notes/rfc1661.txt http://www.isi.edu/in-notes/rfc2516.txt http://www.isi.edu/in-notes/rfc2878.txt Jim -Original Message- From: Pierre-Alex [mailto:[EMAIL PROTECTED]] Sent: Friday, December 29, 2000 3:11 PM To: Cisco Subject: ISDN LAPD versus PPP Is it a true statement to say that if your using ppp encapsulation on your interface, the ppp packets are encapsulated in the LAPD packets. If not, where else would ppp packets be encapsulated? I have found no document showing the relationship of ppp and LAPD if you have some reference I would greatly appreciate. Pierer-Alex _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Prototype and Pilot
These terms derive from industries predating the Computer Revolution. The full terms are more self-explanatory: Prototype Development and Pilot Production. In the Pilot Production phase the majority of bugs have been removed and a small Production run results in enough units to attempt a last real-world verification of the unit before finalizing the Production line hardware, software, processes, etc. Not a big deal in the software world but at a big automotive electronics plant (for example) that might produce hundreds or thousands of automotive control computers PER DAY the Pilot Production phase is critical. Priscilla Oppenheimer wrote: It sounds like I may have had it backwards in my message, then?? Bottom line: the terms are not used precisely in the real world. We need to find out if the questioner just wants to know how to use the terms for the DCN test, which is my guess, and then help him with the Cisco DCN viewpoint. The Cisco Press DCN book just has this confusing thing to say on the topic: "For larger configurations, a prototype is generally more feasible. For smaller configurations, a pilot might be more practical. The decision will probably be made on relative costs; the costs for prototyping a portion of the network will be relatively small for a larger network. However, if the network itself is small, then prototyping it could involve costs that are relatively large compared to the total costs of the project, so demonstrating basic functionality with a pilot might be more feasible." Does anyone have any other more useful CCDA books that would answer this question? My book has a whole chapter on testing a network design, but I didn't address the objective of distinguishing a prototype and pilot, since I can't (and I didn't know Cisco expected anyone to. ;-) Priscilla At 02:26 PM 12/29/00, Maness, Drew wrote: A pilot is used when you want to prove a minimal amount of functionality. Let say, for security reasons, you want to implement SSH on your routers. You don't need to create a large scale network to test functionality for SSH. All you would do is take one router for each type, plus maybe take into account different IOS images and test the different configurations for SSH. This would be a pilot. A prototype is used when you need to prove a complex amount of functionality and interoperability. Let say you were asked to design a remote access solution for 10,000 sales people all using a small router XYZ connecting to a Core Router of type ZZZ. And you estimate that the Core Router of type ZZZ can handle N number of XYZ routers connecting to them. You also estimate that the company will need to purchase 1,000 ZZZ routers to handle the entire load. A prototype would be a couple of ZZZ routers and the appropriate amount of XYZ routers to test your theory. A prototype is usually a scaled version or modular version of your final design. Also note that the use of a pilot or a prototype is usually driven by the customer requirements. The more the customer requirements want you to prove the more likely you are to use a prototype. In short. A pilot test a minimal amount of functionality. A prototype is usually a scaled version of your design. Hope that helped more than it confused. Drew -Original Message- From: Hunt [mailto:[EMAIL PROTECTED]] Sent: Friday, December 29, 2000 1:23 PM To: [EMAIL PROTECTED] Subject: Prototype and Pilot Can anyone please tell me what is the difference between a prototype and a pilot? And when will you use them? Hunt _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Priscilla Oppenheimer http://www.priscilla.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ISDN monitoring tool
Dear All, I am looking for a network tool which can be run on a pc to monitor an ISDN network for network livelihood and heartbeat to assist network managers for troubleshooting. Thanks very much for any help. Moe Kazemian MCSE,CCNA Net. Enginner _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Passed CCDA last year
Congratulations ! ! ! What did you use to study? Thanks, Jay "william" [EMAIL PROTECTED] wrote in message 92rv3k$pu8$[EMAIL PROTECTED]">news:92rv3k$pu8$[EMAIL PROTECTED]... Hi guys Just share the joy with you. I passed it on 30/12/2000. Much more difficult than CCNA. Thanks. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Ping response between subnets slow
Hi, 10 ms seems high on a switched network. I assume that both networks (Switches) have a trunk between each other and from one switch back to the router if you are using VLAN's. Check your ethernet interface on your router. See what traffic it is doing. Check for collisions, Late collisions, CRC's. Check the port on the switch connecting to the router. Make sure the aggree on the port speed (they will or no comms) and the duplex settings (the most common problem). DO NOT LEAVE THE SWITCH IN AUTO NEGOTIATE MODE. Just some thoughts. Teunis Hobart, Tasmania Australia On Tuesday, January 02, 2001 at 05:25:17 AM, Amit Gupta wrote: Hi Everybody, Need some help on the following problem I have 2 subnets configured on my LAN say ( x.x.1.0 and x.x.2.0 )with a SM of 255.255.255.0. There are 2 Catalyst switches ( each one on a different subnet) The router is configured with a primary and a secondary address on the ethernet port say x.x.1.1 and x.x.2.1 When I ping a station on one subnet to another and viceversa the response time is very high (sometimes upto 80ms) while the response time while pinging in the same subnet is less than 10ms. Need some clues on the possible reasons for this Thanks Regards Amit __ Do You Yahoo!? Yahoo! Photos - Share your holiday photos online! http://photos.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- www.tasmail.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
need routing table tutorial
Group, Does anyone have a link to a site that has a good basic tutorial going over components in a Cisco router routing table? I have been trying to find one on Cisco's webpage and I can't find anything. I looked under everything. Well maybe not everything. I would really appreciate anyones help! Brian _ Get your FREE download of MSN Explorer at http://explorer.msn.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Off topic
Hi, It depends on the use. There can be different wiring for different devices. Also the roll-over cable used by Cisco is different to a straight cable or a X-over cable. SO it does really depend on what you intend to use it on and with what you intend to use it. Check but I think the RJ45 Console ports 1 - 8 are looped. 2 DTR connects to DSR on remote device 3 RXD connects to TXD on the remote device 4 Sig GRND connects Signal Ground on remote device 5 Sig GRND connects Signal Ground on remote device 6 TXD connects to RXD on the remote device 7 DSR connects to DTR on remote device 8 - looped to 1 25 PIN console port 1 Ground (do not connect to remote device) 2 RxD 3 Txd 4 Clear to Send (CTS) 5 Request to send (RTS) 7 Signal Ground. (often connected to pin 1 internally) 8 Data terminal Ready (DTR) 20 Data Carrier Detect (DCD) You PC manual will give the pinouts for your other devices. Teunis Hobart, Tasmania Australia On Tuesday, January 02, 2001 at 10:07:59 AM, Naveen Sharma wrote: Dear Friends, Can any one give me wiring diagram for RJ-45 to DB 9 pin out and RJ-45 = to DB 25 pin out. Thanks for help Best regards Naveen _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- www.tasmail.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE practice written exams
Hi all, I have completed the CCNP and CCDP, and I am preparing for the CCIE written exams, you would please advise me of any practice written exams? How good are the ones from www.boson.com? Would you also offer any tip or study method. Thai Nguyen Senior Networking Engineer IT Delivery Australia Post 03 9204 5309 CAUTION This e-mail and any files transmitted with it are privileged and confidential information intended for the use of the addressee. The confidentiality and/or privilege in this e-mail is not waived, lost or destroyed if it has been transmitted to you in error. If you received this e-mail in error you must (a) not disseminate, copy or take any action in reliance on it; (b) please notify Australia Post immediately by return e-mail to the sender; (c) please delete the original e-mail. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Job Openings???
Check out the job sites (hotjobs.com, monster.con. ect.) put in your skills, and see what pops up. See if anything pops up that will get you near a networking shop. or on that might let you cross train. [EMAIL PROTECTED] wrote: Hello---I have been a CCNA since July 13 and have had no luck finding a job. I live in Houston and would prefer a job in Houston but I also have family in Chicago; VirginaiaBeach, Virginia; and New York. I have pc helpdesk experience troubleshooting Compaq hardware and software, but have no professional networking or Cisco experience..only classroom and lab experience with 2500 series routers.I am not looking for a high salary just enough to get by, my main focus is getting experience. My resume is attached. Feel free to look at it and send me an email or call. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
VPN location
I'm installing a new VPN box. Traditionally, where in the network does the VPN box reside. Does it run parallel to the PIX firewall and be connected to the inside the same way as the pix or should the VPN box be located in the DMZ with a secure tunnel created between the VPN box and the PIX firewall and all requests to the inside network would go through PIX firwall via conduits, etc. Thanks. _ Get your FREE download of MSN Explorer at http://explorer.msn.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Frame Relay - can't get the clear picture of it yet!
Hi, I have revised it myself through some more research. - Original Message - From: "Jaeheon Yoo" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, January 02, 2001 6:38 AM Subject: Frame Relay - can't get the clear picture of it yet! Hi, Before I bother you about this, I searched the archives, but I can't get it clear to me. Sorry but this has been constantly irritating me. I quess there's a big BUG in my understanding. This example is roughly from Jeff Doyle's Routing TCP/IP pp.557~565 There is a star topology frame relay network. HQ is a hub router with three branch routers BR1 , BR2 and BR3. Branch routers have only one PVC each to HQ(This is a partially meshed FR network). (point-to-point subinterfaces are not configured) Please correct me if I'm wrong! CASE 1 - UNICAST packet: Can BR1 ping to another branch router BR2?(I believe so) If it's YES, HQ is responsible for "relaying" ping to BR2. "Relaying" is actually "Routing". What's happening is as follows: 1. BR1 originates a ping packet and encapsulates it with its own locally significant DLCI number (for example, 200) Step 1 needs some enumeration. After BR1's IP layer decides BR2 is directly connected on its F/R interface, it delivers the ping packet to layer 2(F/R) for encapsulation. Then F/R looks up frame-relay maps (in this case, the same DLCI number for BR2 MUST be "statically" mapped, because Inverse ARP only provides DLCI for HQ), if a matchng entry is found, it is properly encapsulated and propagated to HQ. If not, the ping packet is just dropped. http://www.cisco.com/warp/public/125/15.html#15-A 2. It is propagated via the established PVC through F/R Cloud to HQ with HQ's local DLCI number (for example, 100: I understand there's no direct correspondence between two DLCI numbers), When it is sent, the frame has a DLCI configured at BR1, when received it has a DLCI configured at HQ. Through the F/R cloud a F/R switch changes it as preprogrammed. 3. HQ's layer 2 (ie,F/R) strips F/R header off the received frame and examines its destination IP, then decides it doesn't belong to HQ itself. In this part, what is actually examing its destination ip is NOT layer 2(F/R) BUT layer 3(IP), it consults routing table for its destination. And it decides it's directly connected on the same coming interface, therefore it decrements TTL by one and delivers the packet to layer 2(F/R) 4. HQ's layer 2 looks up its frame relay maps configured statically or dynamically(through Inverse ARP). If there is a matching entry for it, It is properly encapsulated and propagated to BR1. If there's no matching entry for it, HQ just drops it. 5. Finally BR2 receives the frame. CASE 2 - BROADCAST packet: Can BR1 send RIPv1 updates to all other branch routers BR2 and BR3 as well as to HQ. (I believe so) I guess I was wrong on this. In some how, update routing information could be delivered to other branch routers, but the same original broadcast packet never get to other branch routers, even if broadcast is enabled. So following step 2 and step 3 is totally wrong. 1. BR1's RIP delivers RIPv1 updates to lower layer F/R, and if F/R is not configured to propagate broadcast traffic, the packet is dropped, Otherwise, if it is configured so through frame-relay map command) It is propagated to HQ as explained step 1 of case 1. But in this case destination ip is set to broadcast address 255.255.255.255. 2. In this case, HQ recognizes it as broadcast packet, so HQ replicates and propagates the broadcast traffic to each PVC except originationing PVC But the packet is self originated, it replicates and propagates the broadcast traffic to each broadcast enabled PVC. And what is responsible for "replicating" is HQ's layer 2(F/R). Am I right? 3. BR2 and BR3 receives the frame. CASE 3 - BROADCAST revisited: If BR2 and B3 are directly connected, from my understanding of CASE 2, there might be a broadcast storm like what happens on LAN Switching. I guess this is totally wrong. Please confirm my understanding. From this I concluded that what is important is: What type of the network it is viewed as, NBMA, point-to-point, or point-to-multipoint. My next question: Does branch router BR1 have the same routing table when it is configured as just NBMA and when as point-to-multipoint under OSPF? All of this probable misunderstanding is due to my lack of field experience. So I always try to read widely, which is the only way I can do now. Please correct my ignorance. Thanks in advance. Jaeheon Yoo _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: AUX Port
you should configure your modem to "auto answer" ""Austin"" [EMAIL PROTECTED] wrote in message 92ssgt$rg2$[EMAIL PROTECTED]">news:92ssgt$rg2$[EMAIL PROTECTED]... I have a Cisco 2511 Access Server. I want to connect to the 2511 via Modem. I have an old Motorola 14.4 modem. The aux port has the ffg config: line aux 0 login password cisco modem inout transport input all I have the phone line plugged into the Modem (where it says TO WALL) and I have the Parallel connector (Modem) from Cisco's console kit plugged into the Modem Parallel Port. Then I have a regular Cisco console cable running from the modem to the aux port. When I call the number it just rings and rings. The modem does not answer. What am I doing wrong or what am I not doing? All help appreciated. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Pass Written
Well done! The listing is about 100 mail everyday, maybe you should check your setting or report the problem to the administrator. I will take the written at this weekend. -Original Message- From: Hubert Pun [mailto:[EMAIL PROTECTED]] Sent: Friday, December 22, 2000 7:10 PM To: Janto Cin; Cisco Study Group Subject: Re: Pass Written Here is what I used for the written exam yesterday Doyle's book (too detail and too good for the written) Kennedy's LAN Switching book (also too detail and too good for written) Caslow book (ok, but too many editing error and too easy on the WAN, Routing Protocol sections) certification zone (harder than the real one) All-in-one Lab book (which does not really help for the written). exam-cram (too easy, not useful) the courses that I took are ACRC, BCMSN, BCRAN and BGP courses. btw, did you receive any email from study group for the last week? i don't. Hubert _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: PIX failover
PIX 520's don't have a R or UR version they all support failover. ""Florin Mechetiuc"" [EMAIL PROTECTED] wrote in message 92svsr$482$[EMAIL PROTECTED]">news:92svsr$482$[EMAIL PROTECTED]... I have couple of 520 firewalls ordered a while back but I don't know if is a way to check if they are in failover bundle. To be more specific , I have one up and running but I would like to install the failover and I don't which one is ( I have other three ordered for other projects). I think it might be a way of checking on Cisco's website by having the serial number of the main firewall and then I can get the the serial number of the failover. Thanks and Happy New Year ! Florin Mechetiuc [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
DFW area study group
Hello all! Would anyone be interested in starting a Dallas/Ft. Worth area study group (more specifically, Mesquite/Rowlett/Rockwall/Wylie areas)? I may be able to bring my company's 4500 and a couple of 2501s to the group. Thank you, Raul De La Garza III CCNA NNCSS MCSE CNE Senior Network Engineer EmCare Incorporated Work 214.712.2085 Mobile 817.991.7889 Pager 877.270.9755 e-mail: [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: ISDN monitoring tool
http://www.crannog-software.com/ -Original Message- From: Moe Kazemian [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 02, 2001 4:50 PM To: Cisco@groupstudy (E-mail) Subject: ISDN monitoring tool Dear All, I am looking for a network tool which can be run on a pc to monitor an ISDN network for network livelihood and heartbeat to assist network managers for troubleshooting. Thanks very much for any help. Moe Kazemian MCSE,CCNA Net. Enginner _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Backlog for CCIE Lab (RTP at least)
Guys!! Rather than comment on anyone else (I mean the ones who have the same goal as us), why not we raise our main concern to Cisco, this is a more positive way than just critize others. Maybe I am too subjective to your comments, but I personally think criticism on people is not the main point of our discussion. "Nathan Casassa" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I certainly agree with all the points Chuck made. One thing that Cisco could do is change the requirements to take the lab besides just passing the written exam. I am not saying by any account that the written is easy, but I know people that have passed it by pure luck and really don't know a darn thing. I know a person right now that has passed the written by getting the passing score on the dime, and he is taking the lab soon. I wish good luck to him, however he is walking in blindly with out EVER actually configured a router. He has no internetworking design or troubleshooting experience in the real world, however he is going to go and take the lab exam just to "see what it is like" I don't think Chuck's ideas are cruel and unusual. I think they really need to make this tougher then it already is. Who wants to put "CCIE #102,000" after their name? If they just open more racks it may get to that point. I believe the written exam should be scratched with a new format with a higher passing score. Truly the money issue sometimes makes little difference. If someone has 30,000 grand to spend on equipment, classes, books etc., a few more grand can't hurt. And if their company is paying then who cares right? I know a company that has spent countless dollars actually flying a guy to Canada, putting him up in a hotel...and paying for his labthey did this 5 times before he passed his lab. Those slots could have been used for someone that actually knew what they were doing and had a chance to pass. It would be nice if they had a 4 hour lab prequal after taking the written. Something that would not require a proctor to pass. You would be given many different scenarios at Sylvan and require to configure them with a virtual IOS. The configs would be sent to an evaluator at Cisco and then you would be contacted a week later concerning scheduling your real lab date. This could weed out some of the flunkies. If Cisco ruins the value of this exam, they are not going to have any future revenue from it. Nate Chuck Larrieu wrote: I was told Cisco was trying to reduce the problem, but not how they were going to achieve their goal. (I wish them luck) some cruel and unusual thoughts come to mind. 1) Set some arbitrary standard such that people who fail day one by more than so many points have a 90 day wait for retest, rather than 30 days. Or you have to at least made it into day 2 to be able to retest within 30 days. Some such thing 2) Limit the number of times one may attempt the lab in any 12 month period. 3) Increase the price charged for each lab attempt. E.g. 1K for first attempt, 2K for 2nd, 5K for third I say this half jokingly, but half seriously. I talk to a lot of people who take the lab, both those who have passed and those who have not. The old rule of economics holds true - people act according to their perceived best interest. If someone else is footing the bill, and there is no disincentive for failure, then people will act accordingly. They will book themselves and make attempts even when they know they have no hope of passing. They will schedule attempt after attempt because there is no reason not to, especially if someone else pays, and especially if there is no penalty for failure. To be frank, I don't see any incentive for Cisco to do anything to change things on the demand side. They might add more racks, or more lab locations. But do the numbers some time. Cisco is booking something like 25 - 30 people a week in San Jose alone. That's 25-30 K per week in revenue, or at least 1.3 million a year. So they pay a couple of lab proctors 150K each. The rest is pure profit. ( yes, I know from an accounting standpoint there are several other cost factors ) So the incentive from Cisco's standpoint is do figure out ways to add revenue, rather than limit testing attempts. I look for Cisco to announce a bit more capacity, either in terms of adding another location or adding more racks at existing locations. Or both. There is a ton of money to be made in the certification game, and as the entity that controls the rules and the market, Cisco certainly enjoys the lion's share of that revenue. Chuck -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of [EMAIL PROTECTED] Sent: Sunday, December 31, 2000 9:04 AM To: [EMAIL PROTECTED] Subject:Backlog for CCIE Lab (RTP at least) I am a little behind on my mail, so please
Re: AUX Port
Hi All, I suggest first you should make sure that the modem is having S0 register as 1. If the modem have a front panel you can check it by see the setting ANSWER=RING #1 (well, it is in the Motorola Codex 3266). If not, try to connect the modem to a PC and do hyperterminal to COM1 and then type : ats0=1 atw aty And then while in hyperterminal and connect to the modem, dial the modem from another computer, you should see RING on hyperterminal and then connect. Second you must make sure the modem is well connected to router. You can do this by telnet to router port 2001 and then do at atv If there is a response then psysical connection is OK. Third do 'sh users' on router. If you see any aux line appear, then it mean the router is busy trying to find out the modem type and you must clear the line. or you can put 'modem autoconfigure discovery' command. Hope will help -ivan- David Nie wrote: you should configure your modem to "auto answer" ""Austin"" [EMAIL PROTECTED] wrote in message 92ssgt$rg2$[EMAIL PROTECTED]">news:92ssgt$rg2$[EMAIL PROTECTED]... I have a Cisco 2511 Access Server. I want to connect to the 2511 via Modem. I have an old Motorola 14.4 modem. The aux port has the ffg config: line aux 0 login password cisco modem inout transport input all I have the phone line plugged into the Modem (where it says TO WALL) and I have the Parallel connector (Modem) from Cisco's console kit plugged into the Modem Parallel Port. Then I have a regular Cisco console cable running from the modem to the aux port. When I call the number it just rings and rings. The modem does not answer. What am I doing wrong or what am I not doing? All help appreciated. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Frame-Relay spoke redundancy
All, We just had a second T1 installed on our 3600. Our first supplies about 20 spokes, sub-if, with various CIR's all running EIGRP with bandwidth statements. The second was provisioned via a different cloud path for redundancy. We want to "automatically" backup the primary spokes with the second T1. I can use the "backup" command but we already use this method for ISDN on some of the links, so were leaning toward a load-balancing solution. My main concern is due to the different provisioning paths the metric may be lower for the majority of the spokes on one of the T1's, thereby having an awfully lop-sided load balancing architecture. I could tweak these in via an Easter egg method, but that's a lot of work for what its worth. Is anyone running a similar configuration and want to shed some light? Thanks! _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
invalid
hi: all,i have a router 2620 prompt the information below: cisco 2620 (MPC860) processor (revision 0x102) with 28672K/4096K bytes of memory. Processor board ID JAD04310EXU (2782278826) M860 processor: part number 0, mask 49 Bridging software. X.25 software, Version 3.0.0. Basic Rate ISDN software, Version 1.1. 1 FastEthernet/IEEE 802.3 interface(s) 4 Low-speed serial(sync/async) network interface(s) 1 ISDN Basic Rate interface(s) 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read/Write) Invalid percentage: valid values are:10, 15, 20, 25, 30, 40, 50 what's the problem in this router thanks tom _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Ping response between subnets slow
What about the times when you ping from switch to switch? Is it slow when you try that? In a message dated 1/2/01 6:10:33 PM Eastern Standard Time, [EMAIL PROTECTED] writes: Hi, 10 ms seems high on a switched network. I assume that both networks (Switches) have a trunk between each other and from one switch back to the router if you are using VLAN's. Check your ethernet interface on your router. See what traffic it is doing. Check for collisions, Late collisions, CRC's. Check the port on the switch connecting to the router. Make sure the aggree on the port speed (they will or no comms) and the duplex settings (the most common problem). DO NOT LEAVE THE SWITCH IN AUTO NEGOTIATE MODE. Just some thoughts. Teunis Hobart, Tasmania Australia On Tuesday, January 02, 2001 at 05:25:17 AM, Amit Gupta wrote: Hi Everybody, Need some help on the following problem I have 2 subnets configured on my LAN say ( x.x.1.0 and x.x.2.0 )with a SM of 255.255.255.0. There are 2 Catalyst switches ( each one on a different subnet) The router is configured with a primary and a secondary address on the ethernet port say x.x.1.1 and x.x.2.1 When I ping a station on one subnet to another and viceversa the response time is very high (sometimes upto 80ms) while the response time while pinging in the same subnet is less than 10ms. Need some clues on the possible reasons for this Thanks Regards Amit Mark Zabludovsky ~ CCNA, CCDA, 1/2-NP A HREF="mailto: [EMAIL PROTECTED]"[EMAIL PROTECTED]/A "Even if I knew I had only 1 more week to live, I would still schedule my CCIE lab. I would just have to work a little harder I guess. After all, without any goals in life, I'm dead already." ~Mark Zabludovsky~ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Enhanced Interior Gateway Routing Protocol
http://cio.cisco.com/warp/public/103/eigrp5.html _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Job Openings???
Look at the telco industry for a NOC position. While it is not the best work it is often a good place to start your career. Good luck From: Rob [EMAIL PROTECTED] Reply-To: Rob [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: Job Openings??? Date: Wed, 03 Jan 2001 09:27:55 -0800 Check out the job sites (hotjobs.com, monster.con. ect.) put in your skills, and see what pops up. See if anything pops up that will get you near a networking shop. or on that might let you cross train. [EMAIL PROTECTED] wrote: Hello---I have been a CCNA since July 13 and have had no luck finding a job. I live in Houston and would prefer a job in Houston but I also have family in Chicago; VirginaiaBeach, Virginia; and New York. I have pc helpdesk experience troubleshooting Compaq hardware and software, but have no professional networking or Cisco experience..only classroom and lab experience with 2500 series routers.I am not looking for a high salary just enough to get by, my main focus is getting experience. My resume is attached. Feel free to look at it and send me an email or call. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ Get your FREE download of MSN Explorer at http://explorer.msn.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: problem on FR
Frank, check sh frame lmi to see if you are sending and receiving LMI. if not, chek the LMI type - Original Message - From: "Dennis @ Eathlink" [EMAIL PROTECTED] To: "'news.groupstudy.com'" [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Tuesday, January 02, 2001 3:39 PM Subject: RE: problem on FR PVC deleted - your router does not see the DLCI that you have configured ( Check to see if you are getting lmi from the switch, if yes then check your DLCI's or call telco) PVC inactive - your router sees a DLCI on the frame relay but something is stopping it from becomming active (check the configutation on both ends ) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of news.groupstudy.com Sent: Wednesday, January 03, 2001 1:16 AM To: [EMAIL PROTECTED] Subject: Re: problem on FR What is the status of the main interface you are configuring this Frame-relay subinterface on? I have typically seen a "deleted" status for a PVC to mean that the PVC within the frame-relay net you are connecting to is not built. "Frank" [EMAIL PROTECTED] wrote in message 92s7rc$4f2$[EMAIL PROTECTED]">news:92s7rc$4f2$[EMAIL PROTECTED]... I am configuring a multichannel E1 board on 7513 to connect with a FR net. when i use SH FRAME PVC ,i got the the PVC status is "deleted " or "inactive" what acturally does it mean ? as far as i know ,"deleted" means the line between router and FR switch is not OK, and "inactive" means OK. i also got the following infor when i unplug the line from the router and then plug it back. (i opened deb frame packet and deb frame event on) serial4/0/0:0 broadcast search serial4/0/0:0 encaps failed on broadcast for link 7(IP) what does it mean? Any help is appreciated. Frank _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
2501 master reset
I have a used 2501 cisco router with no information about it. It is password protected in user mode. I don't even know what subnet it is configured for. Is there some way to reset the router in this case. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: confusion
You have to enter ur sylven number to login. Logo they will mail you if u give ur details in that site Congratulations on ur success and new year wishes Rameshbabu On Fri, 29 Dec 2000, Kamran Sheikh wrote: Dear Sir /Madam, I have some confusion on registration on cisco tracking system. Kindly tell me i have my cisco ID i have cleared the CCNA 2.0 exam in previous month. I have tried on tracking system but it cannot be login. please help me. And another thing where CCNA 2.0 logo resides ? Waiting of your response. Regards, Kamran __ Do You Yahoo!? Yahoo! Photos - Share your holiday photos online! http://photos.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Enhanced Interior Gateway Routing Protocol
This looks good. Teunis Hobart, Tasmania Australia On Tuesday, January 02, 2001 at 10:35:34 PM, [EMAIL PROTECTED] wrote: http://cio.cisco.com/warp/public/103/eigrp5.html _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- www.tasmail.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: problem on FR
Hi, I was under the impression that when you get "Deleted" there is no PVC between you and the frame switch. You might still see an LMI but the DLCI you think you have is not connected at the frame switch. When you see the PVC as "inactive" this indicates the DLCI to the frame switch is configured ok but the remote site is either down, the DLCI on the remote site is not configured or you are trying to get to the wrong DLCI on the remote site. Hope this helps. Teunis, Hobart, Tasmania Australia On Tuesday, January 02, 2001 at 10:08:50 PM, Dan Snyder wrote: Frank, check sh frame lmi to see if you are sending and receiving LMI. if not, chek the LMI type - Original Message - From: "Dennis @ Eathlink" [EMAIL PROTECTED] To: "'news.groupstudy.com'" [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Tuesday, January 02, 2001 3:39 PM Subject: RE: problem on FR PVC deleted - your router does not see the DLCI that you have configured ( Check to see if you are getting lmi from the switch, if yes then check your DLCI's or call telco) PVC inactive - your router sees a DLCI on the frame relay but something is stopping it from becomming active (check the configutation on both ends ) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of news.groupstudy.com Sent: Wednesday, January 03, 2001 1:16 AM To: [EMAIL PROTECTED] Subject: Re: problem on FR What is the status of the main interface you are configuring this Frame-relay subinterface on? I have typically seen a "deleted" status for a PVC to mean that the PVC within the frame-relay net you are connecting to is not built. "Frank" [EMAIL PROTECTED] wrote in message 92s7rc$4f2$[EMAIL PROTECTED]">news:92s7rc$4f2$[EMAIL PROTECTED]... I am configuring a multichannel E1 board on 7513 to connect with a FR net. when i use SH FRAME PVC ,i got the the PVC status is "deleted " or "inactive" what acturally does it mean ? as far as i know ,"deleted" means the line between router and FR switch is not OK, and "inactive" means OK. i also got the following infor when i unplug the line from the router and then plug it back. (i opened deb frame packet and deb frame event on) serial4/0/0:0 broadcast search serial4/0/0:0 encaps failed on broadcast for link 7(IP) what does it mean? Any help is appreciated. Frank _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- www.tasmail.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: about connect the ISP
Having static route for ur network in their(mother isp) router and redistributing static in to their dynamic routing protocol(like ospf) is one option ... Rameshbabu On Sat, 30 Dec 2000, gary gary wrote: Hi guys: We are a small ISP, just using static routing connect the mother ISP, the mother ISP assign a class C address to us, I want to know how the mother ISP locate the Class c networking , just using static routing? Need they redistribute the static to their dynamic routing (for example OSPF) in order to the internet router know the class c network,? Did the mother ISP create the stub area, then assign the lots of ip address to stub area ,if so how to create the stub area by static routing? Anyone can give me some configuration, Thanks in advice gary __ Do You Yahoo!? Yahoo! Photos - Share your holiday photos online! http://photos.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: 2501 master reset
Troy- Here is the URL for Cisco's instructions for password recovery. http://www.cisco.com/warp/public/474/pswdrec_2500.html Once you have the password, you can see the configuration and do what you want with the router. If this is a router for your study lab, my suggestion is to blow config away and start over. -Eddie At 11:17 PM 1/2/01 -0500, Troy wrote: I have a used 2501 cisco router with no information about it. It is password protected in user mode. I don't even know what subnet it is configured for. Is there some way to reset the router in this case. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: 2501 master reset
Troy- Here is the URL for Cisco's instructions for password recovery. http://www.cisco.com/warp/public/474/pswdrec_2500.html Once you have the password, you can see the configuration and do what you want with the router. If this is a router for your study lab, my suggestion is to blow config away and start over. -Eddie At 11:17 PM 1/2/01 -0500, Troy wrote: I have a used 2501 cisco router with no information about it. It is password protected in user mode. I don't even know what subnet it is configured for. Is there some way to reset the router in this case. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco Certification Digest V2 #917
I will be on vacation until January 8 and out of pager and cell phone range. For all network related issues please contact our Network Operations Center at 800-610-4684. Dan Keller _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Ping response between subnets slow
One thing you can also try is to ping both interfaces on the router from one of the hosts to see if it slows over the router. If it slows between the .1 interfaces then you may be running way to much information over the router with an access-list that is too complicated for a low end router (or one that is low on memory.) More then likely Tony's suggestion will fix the issue from what i have seen. Rick Thompson --- Tony van Ree [EMAIL PROTECTED] wrote: Hi, 10 ms seems high on a switched network. I assume that both networks (Switches) have a trunk between each other and from one switch back to the router if you are using VLAN's. Check your ethernet interface on your router. See what traffic it is doing. Check for collisions, Late collisions, CRC's. Check the port on the switch connecting to the router. Make sure the aggree on the port speed (they will or no comms) and the duplex settings (the most common problem). DO NOT LEAVE THE SWITCH IN AUTO NEGOTIATE MODE. Just some thoughts. Teunis Hobart, Tasmania Australia On Tuesday, January 02, 2001 at 05:25:17 AM, Amit Gupta wrote: Hi Everybody, Need some help on the following problem I have 2 subnets configured on my LAN say ( x.x.1.0 and x.x.2.0 )with a SM of 255.255.255.0. There are 2 Catalyst switches ( each one on a different subnet) The router is configured with a primary and a secondary address on the ethernet port say x.x.1.1 and x.x.2.1 When I ping a station on one subnet to another and viceversa the response time is very high (sometimes upto 80ms) while the response time while pinging in the same subnet is less than 10ms. Need some clues on the possible reasons for this Thanks Regards Amit __ Do You Yahoo!? Yahoo! Photos - Share your holiday photos online! http://photos.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- www.tasmail.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Photos - Share your holiday photos online! http://photos.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: kindly tell me
Hello, You will have to create your tracking ID, using the data of your CCNA Sylvan details, they will create an account for you, and you can enter later either using the designated login name cscoxxx or your sylvan number. The data is all in your form, e.g. venue, date, passing score, your score, etc Hope it helps Regards, Leonard Ong, ST, CCIE Candidate, CCNP RS+Voice, CCDP RS, CSE, SAIRGNU LCP, MCP, BCP, QSP _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
