-Knowledge-Village@yahoogroups.com
Subject: RE: [Axapta-Knowledge-Village] Urgent hardware
Sizing!! HELP
Udi, I'm no expert, but since no one else as repliedhere's my $.02. We are
implementing AX in about the same size company. I was told by several sources
you 3
Udi, I'm no expert, but since no one else as repliedhere's my $.02. We
are implementing AX in about the same size company. I was told by several
sources you 3 channels for SQL. So,we went with a small san. This gave the
three channels , redundancy. We set up 120GB for the go live company and
This is little confusing. You have 4 environments and AOSes are installed on
same server!?
Did you mean that, u want to simulate 4 environments in a single environment?
Thanks,
Mahesh
From: kardo_ax kardo...@yahoo.com
To:
Sent: Thu, 25 February, 2010 6:20:45
Subject: Re: [Axapta-Knowledge-Village] Urgent: Total Discount on Sales Order
Amount.
Try using rounding off
Regards
Abhay
-Original Message-
From: Khalil Rehman khalilrehm...@hotmail.com
Sent 2/24/2010 1:32:43 PM
To: Knowlege Village axapta
Try using rounding offRegards
Abhay
-Original Message-
From: Khalil Rehman khalilrehm...@hotmail.com
Sent 2/24/2010 1:32:43 PM
To: Knowlege Village axapta-knowledge-village@yahoogroups.com, Development
Group ax-developm...@yahoogroups.com, Development Axapta
I TRIED THE SAME SCENARIO, I WORKED FINE FOR ME, JUST SYNCHRONIZE THE
PRODBOMTABLE IN AOT AND TRY ONCE.
OTHERWISE PROVIDE MORE DETAILS OF THE SCENARIO AND I WILL TRY TO SIMULATE
IT.
From: Axapta-Knowledge-Village@yahoogroups.com
[mailto:axapta-knowledge-vill...@yahoogroups.com] On Behalf
AX2009
--- On Mon, 11/30/09, Craig Fidler cfid...@bs3.co.za wrote:
From: Craig Fidler cfid...@bs3.co.za
Subject: RE: [Axapta-Knowledge-Village] URGENT : posting a purchase Return
Order , system takes long time
To: Axapta-Knowledge-Village@yahoogroups.com
Axapta-Knowledge-Village
: Monday, November 30, 2009 1:54 PM
To: Axapta-Knowledge-Village@yahoogroups.com
Subject: RE: [Axapta-Knowledge-Village] URGENT : posting a purchase Return
Order , system takes long time
AX2009
--- On Mon, 11/30/09, Craig Fidler cfid...@bs3.co.za wrote:
From: Craig Fidler cfid...@bs3.co.za
yes , i have tried SP1 but the problem is still there.
--- On Mon, 11/30/09, Craig Fidler cfid...@bs3.co.za wrote:
From: Craig Fidler cfid...@bs3.co.za
Subject: RE: [Axapta-Knowledge-Village] URGENT : posting a purchase Return
Order , system takes long time
To: Axapta-Knowledge-Village
Usually this error comes while posting any journal and amounts are not balanced
or offset is not specified for that journal line.
you may check the same and post the journals first and later try for the IC. It
may help -:)
Santosh
--- On Sat, 24/10/09, Ax Consultant
Hi,
I think your have to change you consept of increasing inventory value and
quantity other way.
No other way to solve your problem
Regards,
Somnath
From: ax_consultant ax_consult...@yahoo.com
To: Axapta-Knowledge-Village@yahoogroups.com
Sent: Thursday, 27
Hi,
Please check the OLAP query and the *joins* in the Datasources as these
joins might
restrict some data to bring in to the cube.
Regards,
Anitha.
On Sat, Jul 25, 2009 at 4:47 PM, nilesh sonawane nilesh_...@yahoo.comwrote:
Hi,
I am processing general ledger cube.
When i try to
Hi,
When you imported inventory, have you checked the InventDim table. This
error comes generally when no value of InventDim is associated with
inventory. It is a hidden but mandatory parameter from transaction per se.
Regards,
Swati
On Jul 23, 2009 4:51am, Girac girac...@yahoo.com wrote:
Hi,
For the first one, you can setup Record Level Security for each user group
setup the RLS for the required tables and in the query specify the records
that you want to be visible for each user groups.
For second one, you may have to enable CreatedBy property on PO/SO and in
the forms specify
Hi,
The password to the business connector proxy account which was used to install
EP on AX 4.0 was lost and we are trying to reset the password. If the password
has to be reset, can anyone please help out on the required steps so as to not
bring down the EP site? Can we directly reset the
No its not working.
KHALIL UR REHMAN
To: Axapta-Knowledge-Village@yahoogroups.com
From: loya.su...@gmail.com
Date: Thu, 9 Apr 2009 12:48:10 +0530
Subject: Re: [Axapta-Knowledge-Village] URGENT: OR condition in method.
Hi,
This is or condition you need for same
HI,
You can override the lookup method on the controls or datasource and write
your own custom lookups for the same.
Regards,
Sumit
On Mon, Mar 30, 2009 at 10:14 AM, pradeep itnal pradeepit...@yahoo.co.inwrote:
Are they bound controls(Fields from a datasource)??? does nt seem
like bound
Did you consider record level security on InventTable based on your
query by EmplId?
On Sun, Mar 29, 2009 at 1:51 PM, M Anass m_an...@yahoo.com wrote:
Hi All,
My poblem is I've two fields on a grid located at a Form, the first filed,
is the EmplID so it show the gird with autolookup to the
Are they bound controls(Fields from a datasource)??? does nt seem like bound
controls, from ur explaination.
if they are bound controls then
1.Go to Empid Field - modified method and write ur code there, for filteration
of Itemids.
basically u need to call(override) executeQuery method of
Hi Ehtasham,
In form design you can try to drag field linenum from datasource to form
design.
The return value start from 0(zero) just like what in the table is.
Ex: create Line number for invoice
*Go to Custiunvocejournal form design
*drag field Linenum form datasources Custinvoicetrans
Mahmoud,
1) EDT should extend num.
2) Edit the class NumberSeqReference_Cust - copy block of code - paste at
end, change values appropriately - especially the sortfield which must be
one higher than those there.
3) Edit the CustParameters Table to add another method beginning with numRef
(copy
Hi,
I am writing this on behalf of one my financial consultant
First you have to run the settlement process then make the payment update the
challan number
Than create the E-TDS form 17A and 27Q.
And after this u can go to the path u mentioned and thr u can provide
provisional receipt number
Hello,
Here are the answers for your questions:
--- Yes, AX does support bar-coding through standard windows bar-coding
fonts:
Code128, Code39, EAN128, EAN13, EAN8 + UPC variant, ITF, UPCA, UPCE.
--- Yes
--- Simple to set some properties.
--- Need more clearification.
--- Try change the font for
Hi Vishnu,
That ain't any strange problem. Try changing the paper format
e.g. A4 portrait,landscape A3 portrait,landscape etc. And by default I guess it
would take the letter paper as the format. I'm not sure,but give a try.
News-Flash of Axapta Knowledge Village
Hi,
In the Implementation guide:
Version support
Upgrade to Microsoft Dynamics AX 4.0 must be from Microsoft Axapta 3.0 with or
without one of the service packs.
Because data dictionary changes, and as a consequence DEL_ prefixed tables and
fields, are typical from one version to the next,
take a look at:
http://msdn.microsoft.com/en-us/library/aa548126(AX.10).aspx
http://msdn.microsoft.com/en-us/library/aa548608.aspx
Saludos !!!
Atte. Lic. Luis Enrique Martínez Peña Consultor de Sistemas (Area Web)MS
Dynamics AX Developer
Hi Duygu,
You can understand from the report name.
The internal account statement is for company's purpose which just specifies
the invoices due with the due date.
The second statement is printed for the use of the customer where you can
generate the aging of the invoices also and send to the
try to find out data at this link
Partner Source -
https://mbs.microsoft.com/partnersource/support/selfsupport/productreleases/AX2009DemoData.htm
Santosh
--- On Mon, 6/30/08, Sanam Khan [EMAIL PROTECTED] wrote:
From: Sanam Khan [EMAIL PROTECTED]
Subject: [Axapta-Knowledge-Village]
I believe this time only AX 2009 CTP3 VPC Demo
Datahttps://mbs.microsoft.com/partnersource/documentation/howtoarticles/VPCImageAX2009CTP3.htmis
available. you can export data from axapta and upload it to standard
application i believe!
On Mon, Jun 30, 2008 at 1:22 PM, Sanam Khan [EMAIL
You should be able to download the VPC image for AX2009 RTM version from
https://mbs.microsoft.com/partnersource/deployment/methodology/vpc/VPCImageAX2009.htm
This VM is based on new Contoso Demo Data company.
Let me know if this doesnt work.
~Khurram
On Mon, Jun 30, 2008 at 1:50 PM, Naeem
Hi Abdul,
It seems that your AOS service is running under a user that does not have the
rights on the database server.
Did you create a user for your AOS server or are you running under network
service?
De : Axapta-Knowledge-Village@yahoogroups.com [mailto:[EMAIL PROTECTED] De la
Hi,
Do you mean to say you defined the Posting account in the path
IM -- Setup -- Posting -- Posting form tab Purchase order and Options
Receipt.
Check for the item or item group posting setup here.
Regards,
Sumit
On Thu, Jun 12, 2008 at 12:58 PM, gyanendra sahoo [EMAIL PROTECTED]
wrote:
Go to
Inventposting Form from AOT and click
purchase order form---click recipt button
And then select your itemgroup and give the accountnumber like (140)
Thanks
Manoj
- Original Message
From: gyanendra sahoo [EMAIL PROTECTED]
To: Axapta-Knowledge-Village@yahoogroups.com
Sent:
Hi,
What kind of help are you exactly looking for...
Regards,
Sumit
On Wed, Jun 11, 2008 at 11:38 AM, Sanam Khan [EMAIL PROTECTED]
wrote:
Hii
I need help regarding AIF..Do anyone have any idea about functionality and
working of AIF.
Any help would be highly appreciated….
Regards,
Try looking at
https://mbs.microsoft.com/downloads/customer/AX/WhitePapers/ConfigureAIFForDataExchange.pdf
for
some information.
https://mbs.microsoft.com/partnersource/training/news/whatsnewmsdax2009.htm?printpage=false
might
also be useful.
These would require PartnerSource login.
/Khurram
On
*Sent:* Tuesday, May 13, 2008 10:20 PM
*To:* Axapta-Knowledge-Village@yahoogroups.com
*Subject:* RE: [Axapta-Knowledge-Village] URGENT: Layers in AX
Thanks Harry for your quick response:)
actually i am not a technical guy, but have a question if we are having
more than 10 companies running
We can not do that. That is not what layers in Ax do. If you modified a
form/report then the modification will affect all user that has security access
to the particular form/report.
Ax Consultant [EMAIL PROTECTED] wrote: Hi ,
Can we add access restriction on Layers?
, May 13, 2008 10:20 PM
To: Axapta-Knowledge-Village@yahoogroups.com
Subject: RE: [Axapta-Knowledge-Village] URGENT: Layers in AX
Thanks Harry for your quick response:)
actually i am not a technical guy, but have a question if we are having more
than 10 companies running on single AOS/File Server
Dude! Don't get me wrong but what you have stated is not the requirement. The
requirement is something else, what you have stated is your solution.
If you state the requirement along with your solution, you have a better chance
of someone coming up with a better way to satisfy the requirements.
Hi,
Are you posting Route Journal or Job Card.
1. Check how is the route defined for your item is there any process time ?
2. If you are using Job card check how is your routing group defined .
Hemant K
- Original Message
From: visti Sethna [EMAIL PROTECTED]
To: Rajendra Jawal
Visti
NeerajC here
This is typical scenario of jobwork where u hav Subcontract Order of BOM type
and Operation BOM type
Setting how to do :
In Routes operations workenter( Vendor type) i.e opr 10 operation X work
center Vendor type
opr 30 operation X work center Vendor type
In BOM Add a
Hi kapil
Any Luck with the email alerts. I'm trying to get this through aswell. For
some reason, it fires these exception errors.
Thanks
Akshay
On 7/10/07, Kapil Khanna [EMAIL PROTECTED] wrote:
document
Siva kumar [EMAIL PROTECTED] mgsivani%40yahoo.com wrote: Hi Friends,
I have
Hi kapil,
I have attached the document earlier. No problem again Iam attaching
the document.
Thanks,
Siva
Kapil Khanna [EMAIL PROTECTED] wrote:
document
Siva kumar [EMAIL PROTECTED] wrote: Hi Friends,
I have problem in firing Email alert from
document
Siva kumar [EMAIL PROTECTED] wrote: Hi Friends,
I have problem in firing Email alert from dynamics Ax. I have attached the
document which contains the steps I followed. Can anyone go through this
document and help me on this issue.
If any solution will be greatful to
Check the delivery remainder and see if things are messed up due to updating
the delivery
Raj
-Original Message-
From: Axapta-Knowledge-Village@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Brandon
George
Sent: Friday, June 02, 2006 10:58 AM
To:
?
Thanks,
Brandon
-Original Message-
From: Axapta-Knowledge-Village@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of RajaGopal B
Sent: Friday, June 02, 2006 2:28 PM
To: Axapta-Knowledge-Village@yahoogroups.com
Subject: RE: [Axapta-Knowledge-Village] URGENT!!! Please help
Check
:49 AM
To: Axapta-Knowledge-Village@yahoogroups.com
Subject: Re: [Axapta-Knowledge-Village] Urgent Opening Balance Uplode!
hi,
Thanks yah it works, but in the case of inventory i'm trying to uplode
through movement journal,in which the dimension number is created
automatically when im
hi,
Thanks yah it works, but in the case of inventory i'm trying to uplode through movement journal,in which the dimension number is created automatically when im selecting an item in the jn'l but if i try to insert the record with blank dimension no. how to di this,
Any idea...
hi shanmug...
i agree with hemant...it should work..
Hav been using the same method too..
Didnt encounter a problem either..
anybody having other suggestions..
Regds
Hema Krish
Hemant Kumthekar [EMAIL PROTECTED] wrote:
Hi,
Create a template for LedgerJournalTrans table to
Hi,
Create a template for LedgerJournalTrans table to Import Vendor Invoices, we have been doing this for years now and never had problem
1. Create a Journal Batch. AP Journals Invoices Invoice Journal. Note down the Journal Number.
2. Click on the Lines button and note down the
Hi Shanmug !!
The tips may help you, follow the steps
1. Create a temptable according to the value of customer/vendor which fields u r going
to import.
2. Create a defination group for importing the data, type should be Custom and take
the 'Name of table as u create just now.
3. Import
Hai,
Regarding the Lookup, if u r using Extended data type then there is no need to write a lookup(provide u don't need a customized lookup).If u want to create a lookup form just see the InventLookup form under the Forms node in AOT.
regarding the filtration u can do this using the
: Axapta-Knowledge-Village@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of venkat
raghavan
Sent: Tuesday, April 25, 2006 6:23 AM
To: Axapta-Knowledge-Village@yahoogroups.com
Subject: Re: [Axapta-Knowledge-Village] Urgent: Working with lookups in
a form
Hai,
Regarding the Lookup, if u r using
hi,
use the systablelookup method.
Mukesh
venkat raghavan [EMAIL PROTECTED] wrote:
Hai,
Regarding the Lookup, if u r using Extended data type then there is no need to write a lookup(provide u don't need a customized lookup).If u want to create a lookup form just see the InventLookup
Hi Priyank,
In prompt method before Super() try this code:
element.printjobsettings().fitToPage(True);
Thanks regards,
Siva
Priyank Krishna [EMAIL PROTECTED] wrote:
hi guys,
I am facing strange thing on the report.
In a report, I have added 30 controls in a
Thank for ur reply,
I found my answer, actually I was drawing multiple matrixes of different
dimensions on the report.so system unable to decide about the maximum dimension
of matrixes to be printed.
So I made the system know about the highest dimension before printing any
data then
Hi Krishna,
I think its not possible to use ReCordSortedList class to sort the records in
decending order.
My recomendation is that you may have to create a temporary table and do a
'Inser_recordSet' and then use select orderby or group by with option Asc or
desc...
These
Hello Alessandro,
Here is my experiece on Multi locationzations.
We have 3 localisations on three different Databases.
Northa America, Spain and Germany...
We could have installed in one database for all these three localisations. I
think MS is still working on this. and
Elaborate your query, what exactly you want to do.
Padmaja Iyingar [EMAIL PROTECTED] wrote: Hi,
II made a form.
have a lookup on a formcontrol of this form. When I click the lookup, I get
some 30 ProjIDs. from the dropdownlist how can I capture the each projID as I
scroll the mouse
When you create a method to call a Lookup send ProjID as a parameter.
See this example:
1) In the form datasource à field add this method. Send the parameters
that you need.
public void lookup(FormControl _formControl, str _filterStr)
{
;
Dhanashree,
In two tier client
installation there is no need to use AOS, no need to specify the server name and
object servername, but in three tier client you need to use AOS,
specify server name and object servername.
I am not clear abt
2nd question, can u elaborate it ?
Regards,
jay
Hi Dhanashree,
There are some2 types of Architecture available.
2 Tier: The2-tier architectureconsists of a database server that contains the business data, and a file server that contains application files and the client directly communicate with these two servers.Thats' whyrequires
12:16 ãTo: Axapta-Knowledge-Village@yahoogroups.comSubject: RE: [Axapta-Knowledge-Village] URGENT Decimal Length Which part needs to be 3 decimals? And why?
Qty? Price? Sales or Purchase? Base Amounts? -Original Message-From:
Axapta-Knowledge-Village@yahoogroups.com [mai
[mailto:[EMAIL PROTECTED] On Behalf Of Asrar
AhamedSent: 25 December, 2005 11:02 صTo:
Axapta-Knowledge-Village@yahoogroups.comSubject: RE:
[Axapta-Knowledge-Village] URGENT Decimal Length
Hi Mohib,
Sorry I am raising one more query for you...
Say, if I want to maintain three
Title: Message
Which part needs to be 3 decimals? And
why?
Qty?
Price? Sales or Purchase?
Base Amounts?
-Original Message-From:
Axapta-Knowledge-Village@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Mohib B.
RedaSent: 24 December 2005 16:31To:
@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of James
FlavellSent: 24 December, 2005 12:16 مTo:
Axapta-Knowledge-Village@yahoogroups.comSubject: RE:
[Axapta-Knowledge-Village] URGENT Decimal Length
Which part needs to be 3 decimals? And
why?
Qty?
Price? Sales or Purchase?
Base Amounts
Hi absi
The planned order creation, is it while running complete master plan or
creating a record from the form?
How many companies do u have?
Have u checked for fragmentation of the database?
What is the run time of the planned production order? i.e. the order is
supposed to be scheduled for
@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Harry
DeshpandeSent: Monday, November 07, 2005 2:16 AMTo:
Axapta-Knowledge-Village@yahoogroups.comSubject: RE:
[Axapta-Knowledge-Village] Urgent Help Needed
From: Harry
Deshpande Sent: 07 November
2005 08:14To:
Axapta-Knowledge-Village
Of Brandon George
Sent: 07 November 2005 13:08
To:
Axapta-Knowledge-Village@yahoogroups.com
Subject: RE:
[Axapta-Knowledge-Village] Urgent Help Needed
I did, and posted my solution here: http://dynamics-ax.blogspot.com/2005/11/strange-issue-with-reports-from-server.html
Also the post above
PROTECTED] On Behalf Of Harry
DeshpandeSent: Monday, November 07, 2005 7:32 AMTo:
Axapta-Knowledge-Village@yahoogroups.comSubject: RE:
[Axapta-Knowledge-Village] Urgent Help Needed
Hi
Oh! I thought in your
original post you are saying that the reports will print for the first two sales
orders
@yahoogroups.com [mailto:Axapta-Knowledge-Village@yahoogroups.com] On Behalf Of Brandon George
Sent: 07 November 2005 15:06
To: Axapta-Knowledge-Village@yahoogroups.com
Subject: RE:
[Axapta-Knowledge-Village] Urgent Help Needed
Well the first two were printing out, but
never for the third report
From: Harry Deshpande
Sent: 07 November 2005 08:14
To:
Axapta-Knowledge-Village@yahoogroups.com
Subject: RE:
[Axapta-Knowledge-Village] Urgent Help Needed
Hi Brandon
Did u manage to find out what the problem
was? Just curious
Regards
Harry
This posting
The thing about this issue is I walk through the code, and
walk through the report, and it freakin creates it! It Creates the report,
through the Send() method will no errors I am not sure really what to
do, because the same code when placed in any other class or clicked method of
I tried as per u said but no luck...helplukas nugroho [EMAIL PROTECTED] wrote:
Dear preety,to create sales order form excel, you need to useSalesTable and SalesLines only. You ought to fill therequirement field (yellow field). do not change ordelete some field on excel regenerated from
I will try uploading using your template and let you know the outcome.
HemantPriyank Krishna [EMAIL PROTECTED] wrote:
I tried as per u said but no luck...helplukas nugroho [EMAIL PROTECTED] wrote:
Dear preety,to create sales order form excel, you need to useSalesTable and SalesLines only.
even though only SalesTable and SalesLine are required
its important to get the correct InventDimId in the
salesLine table. As everyone knows that the
inventDimId is created depending upon the dimension
combination i dont use the standard axapta template
import.
I would write a function and use
Thanks for reponse !
I have used existing Excel template Import functionality for creating sales orders but could not succeed.
you please tell me correct format.I used SalesTable,SalesLine,InventDim what else is remaining into it.
Your response is waitedHemant Kumthekar [EMAIL PROTECTED]
Dear preety,
to create sales order form excel, you need to use
SalesTable and SalesLines only. You ought to fill the
requirement field (yellow field). do not change or
delete some field on excel regenerated from axapta.
hope it helps
--- Priyank Krishna [EMAIL PROTECTED] wrote:
Thanks for
Hi,
You may like to create the Excel spreadsheet from Axapta AdministrationPeriodicData export/Import Excel Spreadsheet. I have upload sales orders Lines using the same technique, quite simple. If you need the format let me know.
HemantPriyank Krishna [EMAIL PROTECTED] wrote:
Can anyone
Hi
We are
using Axapta in Three Tier with Database on Solaris and Application on Windows
Server.
You
have to simply give the oracle database ip addressa and SID of oracle in Axapta
Configuration for three tiee
Regards
From: Axapta-Knowledge-Village@yahoogroups.com
[mailto:[EMAIL
When I set the table 'cachelookup prorty ' to 'none', I get the same orignal results which is 975 which is good.
But...it sucks.
I could not solve the problem. But I set temporarily the 'cahchelookupproperty in 'ledgerTable' to none for time being so that I can bring in all the regular
Hi
I did,
Flush LedgerTable; - No luck
Tools - refresh AOD and Refresh usage , but no luck.
So I suspect the problem is on AOS. So I am going to flush there also to see if it solves my problem. This is problem with 3 tier.
Anyway, thanks . I am replying to my self :D
subbu
"Subrahmanyam,
:[EMAIL PROTECTED] On Behalf Of
Subrahmanyam, MamidiSent: 27 August 2005 11:48To:
Axapta-Knowledge-Village@yahoogroups.comSubject: Re:
[Axapta-Knowledge-Village] Urgent : Problem in Select
count(RecId)
When I set the table 'cachelookup prorty ' to 'none', I get the
same orignal results
Hi, this problem can happen with number sequences that are attached to
ledger vouchers because the voucher number has to be unique throughout the
system. That is why I always recommend to my clients to format number
sequences attached to vouchers so they are all different. The bottom line is
Hey, It could also be due to the Vocher series.
May be, you can hit the 'list' button on the Number Sequence form for that sequence, and delete all the locked/free entries there
Maurice Cohen [EMAIL PROTECTED] wrote:
Hi, this problem can happen with number sequences that are attached
But if the system picks up the overlaped vocher series , this overlapped series record should be present in ledgerTrans table at least. But he said he could not find the record itself.
will wait to hear from him if he had already solved this problem
Maurice Cohen [EMAIL PROTECTED] wrote:
, Mamidi
Sent: Thursday, July 28, 2005 8:37
AM
To: Axapta-Knowledge-Village@yahoogroups.com
Subject: RE:
[Axapta-Knowledge-Village] [Urgent] Cannot Post Ledger Journal
But if the system picks up the overlaped vocher series , this
overlapped series record should be present in ledgerTrans table
Hi Ali,
This is the slide i get from Microsoft Training.
Sorry that i just couldn't recall how the system
calculate 900.10 (Weighted Avearge) and 909.18
(Weighted Avearage Date) after inventory closing. No
matter how i tried i still couldn't get the figure. :(
Could anyone shed some lighst on
Just add some optional parameter to the method that puts the body text... and put that parameter backwards in the method calls chain.This appears to be the easiest way... But, I suggest then to compile all classes in order to avoid surprises.Raúl Llorente Peña Análisis, Desarrollo e
Hello Raul,
I think i cannot live with this solution, but i wonder that there should definitely be any easy solution to this problem. Whereas about the parameters, if i make the parameter as optional then i don't need to put variable in the call in the chain, i just have to run compile forward
hi,
try
this in classed/SYSInetMai/sendMailAttach.
regards
p.sathiyal
-Original Message-From: Amit Jain
[mailto:[EMAIL PROTECTED]Sent: Wednesday, May 11, 2005 5:07
PMTo: Axapta-Knowledge-Village@yahoogroups.comCc:
development-axapta@yahoogroups.comSubject:
hi Cenk
Is this hotfix related to physical inventory on hand report? If yes, then I can give it to you.
(I have changed the project references on this particular hotfix after I recd it from MBS)
regards
harry
Cenk Ince [EMAIL PROTECTED] wrote:
Hi all,Steeve had offered me to find hotfix
use site for server sizing
http://www.fujitsu_simens.com/solutions/strategic_parameters/microsoft/axapta_sizing.html
i think this will solve urs problem
ramyakrishnan_1023 [EMAIL PROTECTED] wrote:
Hi all,I have a requirement where the no. of ASU cross 400. it is 500 ASU. I need to size
Check PartnerSource, there you can get
the Official hardware sizing guides.
Raúl Llorente Peña
Análisis, Desarrollo e Implementación en
Microsoft Bussiness Solutions-Axapta
OPEN SOLUTIONS
ramyakrishnan_1023
[EMAIL PROTECTED]
13/04/2005 08:43
Por favor, responda a
Hi Chea,
Just execute this command again:
select _tblSales;
VardenMorris
J. Wray Nephew Ltd. - Group I.S.
234 Spanish Town Road
Kingston 11, Jamaica, W.I.
Phone: (876) - 923 - 6141 Ext. 2226Fax: (876) - 923 -5372
Cell: (876) - 3833566Email: [EMAIL PROTECTED]
[EMAIL PROTECTED]
Chea
Hi,
I want to upload General Journals, the header and its lines, so the tables that I want to upload are ledgerjournaltable and ledgerjournaltrans. This tablea are going to be added through an interface made in .Net, but my problem is asign the RecId. I'm using mssql, I hope some can help
Hi Ricardo,
Ok. Axapta Recids will be generated in Kernel. what exactly do you want to do?.
Which Tables you want to upload?. Are you uploading vendors/Customer with Atl addresses???.
Let us know. Someone from the group will help you,
Be more specific always.
thanks,
subbu
SDBCRicardo Cortés
department will not accept it.
Thanks
John Jiang
·¢¼þÈË: Harry (Harshawardhan Deshpande [mailto:[EMAIL PROTECTED] ·¢ËÍʱ¼ä: Friday, 25 March, 2005 6:57ÊÕ¼þÈË: Axapta-Knowledge-Village@yahoogroups.comÖ÷Ìâ: Re: [Axapta-Knowledge-Village] Urgent issue in Production!!
hi
I think this is a part
Hi,
When you are doing COSTING of productions Order, just un-check the Report as Finished Check box. Axapta will cost only what wasreported and not the production order quantity.
HemantJiang Hua [EMAIL PROTECTED] wrote:
Hi all:
In production, I have a question, for example: we create
hi
I think this is a part of inventory costingfix beingdeveloped by Microsofoft.
However, this should affect you only if your reported as finished date fall between different accounting years.
regards
harryJiang Hua [EMAIL PROTECTED] wrote:
Hi all:
In production, I have a question,
1 - 100 of 115 matches
Mail list logo
