Newbie

Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: h

RE: L3 switch that support Gigabit Ethernet

BB, I don't understand why you think the 6500's are too slow. Right now a 6500 will support 32Gb back plane or 15Mpps switching, and with the upgrade coming out later this year it will support 256Gb back plane. That seems awful fast to me. Good luck in your findings. -Original Mes

ACLs using MAC addresses

Is there a way to configure a cisco router to filter packets by a hosts' physical address rather then its' logical addresses? Thanks Tom Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com

Foundation 2.0 bets exam

For those who have taken the exam, how many questions? How long was the exam? A collegue is scheduled to write the exam on Friday. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groups

Re: setting mtu size on a 2611

Eric, I wanted to follow up on this one. I've done a bit of reading since my original post and your response. I do not have access to the original Frame Relay Forum FRF.12 document ( alas, it costs 60 bucks, and I have hungry teenage boys to feed :-< ) Now if I understand what I read, both in Gi

ACRC Survey

I sat the ACRC exam today. I had to take a survey before I began the exam. It said that this info will be used to factor(grade) the exam. What is up with this? ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subs

Re: TFTP server

Hi there, The tftp protocol performs reliability checking on its' own in the form of a CRC check on transfered files. You are correct in that UDP is an unreliable protocol. -Brad At 01:43 PM 6/20/00 +0800, BB wrote: >HI, >I just want to ask if it is a reliable transfer protocol. >UDP isn

Re: ACLs using MAC addresses

--- _ tlgerber <[EMAIL PROTECTED]> wrote: > Is there a way to configure a cisco router to filter > packets by a hosts' > physical address rather then its' logical addresses? > > Thanks Tom You can use the access list range 700-799 for normal access list and from 1100-1199 for extended access li

VISIEO??? HELP!! Need Icons

Where can I find a downloadable program that has the icons for routers and switches for doing a network design? ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report mi

Foundations 2.0

Hi All, I am interested in knowing the time allotted and number of questions on this beta exam. Thanks. Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ___ UPDATED

Re: ACLs using MAC addresses

Yes, you can. access-list 700-799 {permit|deny} address mask IP 1--99 Extended IP 100--199 Ethernet type code 200--299 DECnet 300--399 XNS 400--499 Extended XNS 500--599 AppleTalk 600--699 Ethernet address 700--799 Novell 800--899 Extended Novell 900--999 Novell SAP 1000--1099

CCNA frame-relay question

Dear friends, could I ask a frame-relay question (CCNA question) If we need to setup a router as a frame relay switch and connect another router to it. Will the following configuration work? Why? Router A -DCE cable is connected frame-relay switching ! interface Serial0 no ip address encapsul

Anyone giving up?

We all know how tough it is to be a CCNP/CCIE. For those who have tried and tried, how much time did you spend? How much $$? How many times did you sit in a exam or the lab? About to give up? (Just want to understand the difficulty of it from another angle.) ___

How different is 507 compared to 407

Hi, some of you may know that the CCNA exam 407 is retiring at the end of this month. Anyone knows what 's the difference between 407 and the new 507 exam ? I have been studying 407 and suddenly caught up with some very busy work. I 'll only be free to take the test next month. I wonder what els

Why ACRC "Nonrouting" section is difficult?

Dear all Oh, my I failed ACRC at 724 today. More 5 answers should be correct to pass. Two of the losts are skipped because touching ENTER key eventually before complete answer is described when putting my right hand on a mousethat really stunned me. Does remaining a space at the end of c

Re: TFTP server

I'm not anything part of cisco yet but i know that UDP is a connectionless protocol whihc rely on broadcast. that's why FTP is a TCP/IP protocol which uses. It ues TCP to establish a session in a server/client environment. and TCP packet header/footer enabled packet checking capabilities. ken

Re: BGP dampening

>Does anyone know how can I setup a BGP network to test my BGP >dampening setting in the routers ? > > >Rgds > Look at BGPSIM within the routing toolkit at www.merit.edu ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives

which VPN solution to choose

Hi there, Which solution is better, Checkpoint or Cisco? Someone recommends Aventail, is it any good? I check their web sites and they have a lot of customers. What's the difference between Checkpoint and Aventail? One hardware, one software? Thanks in advance. Jim ___

Beachfront ccie test

Have anyone tried the beach front test, after my opinion the test has very poor quality , they just cut and paste some question from a few white paper , most of the even wrong answer ? Please tell me if there is other test ! ___

Re: Catalyst 6509 Giga EtherChannel- trunking

Sorry for something error in the chart. The VLAN between 6509s is VLAN20 with the same network segment. VLAN3 is divided into 2 for more services reliability, but only one Gateway could be set here in one of the 6509 Switches. So when the 6509 with the GW crash, VLAN3 still have to be shut down.

CCIE ISP Dial study group

Does anyone want to form an ISP-Dial online study group???  I'm getting a few of the course manuals, but I'm looking for other post-CCNP level hopefuls that are a few months away from taking the lab...   I just purchased an 804 on Ebay, now I'm selling it there...  I have plenty of access to

trace pop3?

we have a funny problem from our small network. None of us can Receive mail from a certain mail server that we use at a remote location. We can however send mail, using accounts based on that server. We can telnet to port 25 but NOT to 110, on the remote mail server. All indications are that thi

Re: Why ACRC "Nonrouting" section is difficult?

I think this section is not so difficult. I passed ACRC, and this section is 100% correct. I only use the standrad book, having not taken any simulation test. "K.FUJIWARA" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Dear all > > Oh, my > I failed ACRC at

Cisco DSL equipment and firewall

Do any of the DSL routers from Cisco have a firewall feature or firewall options? Thanks, Jeff ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and No

Re: TFTP server

BTW - my TFTP server of choice is the 3com one - does ftp, tftp and loggin in one prog - and the best part is you can d/l it for free from the 3 com site - Original Message - From: "Brad Beck" <[EMAIL PROTECTED]> To: "BB" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Tuesday, June 20, 20

CCNA 1.0 & 2.0

What's the difference between CCNA 1.0 & 2.0? When will CCNA 1.0 last exam be? Which book for CCNA 2.0 is the best, how about CCNA: Cisco Certified Netowrk Associate Study Guide, by Todd Lammle? Moreover, which book is best for CCNP? __

Re: ISDN in Germany

Hello Raphael, >Hello, >I have a 2503 at home that I want to connect to my isp, T-Online. I have >ISDN at home and I cannot get the router to dial. >When I do a debug isdn q921, I see that it is talking. I have tried >different switch-types, and with spid and without. switch type is basic-net

RE: L3 switch that support Gigabit Ethernet

The 6500 is a pretty competent box, though it's a bit more expensive in terms of price to performance compared with boxes from competitors such as Extreme & Foundry. Irwin -Original Message- From: BB [mailto:[EMAIL PROTECTED]] Sent: Tuesday, June 20, 2000 1:46 AM To: [EMAIL PROTECTED] Su

RE: VISIEO??? HELP!! Need Icons

You can get visio icons at www.netcerts.com, you can also get a free download of a pretty nice drawing package from pacestar software at www.pacestar.com irwin -Original Message- From: Brandon Carroll [mailto:[EMAIL PROTECTED]] Sent: Saturday, June 17, 2000 6:29 PM To: [EMAIL PROTECTED]

Re: Win2000 HyperTerminal

I found that HyperTerminal in NT/95 does not work correctly with Cisco. I use the terminal.exe which orginal is in WFW3.11 or Win3.1, it runs well. "Westmoreland, Alexis" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I have noticed that the up arrow does not w

CCNA 2.0

I took the test yesterday and scored a 935 without studying. It isnt much different then the 1.0 exam from what I saw. The passing score is higher (822) and its only 65 questions. (640-407 had 78 I believe). I recommend taking the 2.0 version instead of the 1.0 if you feel pretty confident be

Re: ACLs using MAC addresses

access-list 700-799 hope this help. Cheers, Eric "_ tlgerber" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Is there a way to configure a cisco router to filter packets by a hosts' > physical address rather then its' logical addresses? > > Thanks Tom > __

RE: collision on cut-through switch

Looking at this logically, I don't see how Cisco would not allow for this. A fundamental function of a bridge (besides a layer 2 forwarding decision) is to re-establish the slot time, thus making it a collision domain boundary. If cut-through-switching negates extending the network diameter in the

msg test

msg test ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

IPXSAP problem

All, Has anyone seen this message from a "debug IPX SAP events, and activity". Mar 1 01:00:31: IPXSAP: suppressing null update to A1A1.... I get this at a couple of the routers in my lab. IPX SAP updates are not being forwarded to all the routers. Thanks, Edgar Feliz ___

CIT 4.0 vs Support 2.0

What are the major difference int CIT 4.0 and Support 2.0 I am currently studying using the 4.0 material. Will this work for both test. If not what will... N. Derrick Shumake Network Consultant Main: 303.488.3405 Mobile: 303.906.2900 Fax:303.488.3406 NETIGY The World's

CCIE Lab - San Jose

I am currently making travel arrangements to take the lab in San Jose. Can someone recommend a hotel that's close to cisco? Thanks, Aaron K. Dixon WAN Element Manager - Cisco Omnes, A Schlumberger Company ___ UPDATED Posting Guidelines: http://www.groupstudy.com

IOS 12.1 Dialer Weirdness

Hi All, Has anyone had problems with 12.1.2T and ISDN multilink using a dialer profile? I upgraded a 3640 from 12.0.4.T to 12.1.2.T and while everything else worked the multilink PPP did not. I'll elaborate, the dialer brought up BRI3/0 and BRI3/1 and made the 4 calls one after the other like i

Auto-Reply to: Cisco Certification Digest V2 #

as of 2000-06-12, Nessa Golub is no longer with Genium Publishing. Any business-related e-mail should be sent to: [EMAIL PROTECTED] Any personal e-mail for Nessa can be sent to: [EMAIL PROTECTED] Thank you. -- Genium Postmaster [EMAIL PROTECTED] ___ UPDATED Po

Boson Tests

Hello there... Would someone tell me where I may find information about the Boson Tests that appear to be recommended. Thank you. DS ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.gr

e-mail study group for ccna ?

/ Is there another e-mail study group for a ccna course? If so, how does one join? Feedback appreciated. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report miscondu

Backup Interface

I am trying to backup an serial interface using Bri port. However I go through the BRI interface configruation commands, I could not find the command "backup interface" Can any one help me on how to configure it? And for Bri interface should I configure normal DDR? I am using one cisco4700M an

TCP Connection terminated

Hi, I our company, we have a HP Openview NNM and some Cisco routers (4500, 7200). After I setup the NNM, I found that I always receive a SNMPTRAP "TCP connection has been terminated. (tcpConnectClose Trap) tsLineUser:" from the routers. Does anyone know what does this message means? Is there any

Re: 8540

Brett, The answer is Bridge Groups... Take my GBE interfaces and bridge them to my atm interface. Lou Nelson, CCNP, CCDA - Original Message - From: "Lou Nelson" <[EMAIL PROTECTED]> To: "Brett Frankenberger" <[EMAIL PROTECTED]>; "work" <[EMAIL PROTECTED]> Sent: Monday, June 19, 2000 12:

RE: Passed CIT and now a CCNP

: There is a new CCIE taste available soon ( see : www.cisco.com/go/ccie ) it's : called : DESIGN! I'm STILL waiting to hear back on the result of the Beta I did over two months ago. I was told 4-6 weeks. Guess I'll keep waiting! ___ UPDATED Posting Guidelines:

BCMSN switching exam

hi, i'm studying for the BCMSN switching exam and would appreciate any coursework/study guides/information that i can get hold of. i've got study guides & coursework on most of the other courses (ccna,icrc,cid,cit) and would be willing to swop for good switching resources. Rob [EMAIL PROTECTE

Thanks

I just wanted to send a note of thanks to all the "experts" on the list. I have been a lurker mainly but I just passed the CCIE written. Big Big Thank you Todd, Howard, Pricilla and the rest of the gang!! David Vigna Senior Network Engineer CCNP/CCDP, CNE, MCSE [EMAIL PROTECTED] _

Re: OFF Topic: Any AntiVirus for Linux

> I urgently need a good antivirus for my Lionux DNS and > mail server. Any input appreciated > > Thanks > McAfee is the only one I know of. For mail you can add AMaViS to scan attachments http://satan.oih.rwth-aachen.de/AMaVis/amavis.html David C Prall, CCDP CCNP MCSE MCNE [EMAIL PROTECTED] htt

RE: Boson Tests

groupstudy archives -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Dick Silva Sent: Saturday, June 17, 2000 12:27 PM To: [EMAIL PROTECTED] Subject: Boson Tests Hello there... Would someone tell me where I may find information about the Boson Tests tha

Seperate CCNA study group??

>From reading one of the postings here recently, I got the impression there is a seperate e-mail study group for the ccna course? Can anyone confirm this? Feedback appreciated. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list

Re: Backup Interface

Look Here: http://www.cisco.com/warp/public/793/access_dial/britobribackup.html At 07:59 PM 6/20/00 +0800, Daniel Ma wrote: >I am trying to backup an serial interface using Bri port. However I go >through the BRI interface configruation commands, I could not find the >command "backup interface

ccda

Hi to anybody taking the CCDA. I took it recently and had a shock when the exam flunked out after 7 questions. (I guess corrupted files on the transfer)? Well the point is after a 30 min wait for a second download the 2nd exam was a completely different format than the first. The first exam had

RE: trace pop3?

The first question is has it ever worked, if yes, then what changed since it last worked, either on your network on the account, confirm with your ISP that the Zone file us still properly set up and that it has not changed. You should be able to telnet to the pop3 account on both ports (25 and 11

Re: Backup Interface

You need to configure the backup interface from the serial interface ie: router# int s0 router#(config-if) backup interface bri0 router#(config-if) backup delay 20 40 or router#(config-if) backup interface dialer1 router#(config-if) backup delay 20 40 It would probably be better to use a Diale

Re: IOS 12.1 Dialer Weirdness

Try adding the "no cdp enable" to the interface.and see if that helps. Had experiences where CDP was causing problems for load balancing. Also check if the release of the IOS is a GD or ED. If it's ED, you may want to down/upgrade to a GD version. Let me know Russ.. "Darren Ward" <[EMAIL PROT

re: OSPF !!!

Set priority of the existing DR to 0. That'll force an election. You may need to manipulate the priorities of teh other routers to ensure the router of your choice becomes the DR. HTH, Charles -Original Message- From: [EMAIL PROTECTED] ("Tim McCabe") [mailto:[EMAIL PROTECTED]] Post

ip and subnet

If on one floor I use 10.150.0.0 255.255.0.0 and on the remaining 2 floors I use 10.150.100.0 255.255.255.0 and 10..150.102.0 255.255.255.0, will this work in terms of all three networks being able to communicate with each other. Will there be any problems, etc. Can someone help me reason thi

Re: collision on cut-through switch

Without doing any research and only depending on the seat of my pants, here is what I believe. In a cut-through environment, the switch will only buffer the necessary portion of the frame that is necessary for it to know where to switch the frame to. It doesn't care if the frame is a jumbo or not

IP Addressing

I currently have one floor where my routers and servers are. These are address as 10.100.1.x and 10.100.2.x addresses with a subnet of /16. I'm adding two more floors. However, in adding two more floors can I address these floors as for instance 10.100.11.x, 10.100.12.x, 10.100.13.x, and 10

Interface BRI0/0:1 disconnected from unknown

Hi ISDN gurus, Please find below the error message i get when i try to connect to my remote router. Both routers are running PPP CHAP authentication. What could be reson for line to get diconnected quickly. BR0/0:1 LCP: TIMEout: Time = 0x34C62A5C State = REQsent BR0/0:1 LCP: O CONFREQ [REQse

Memory Calculation

Hello,all ! I have a question regarding a memory calculation. When I buy a Cisco router,I have to make a calculation of memory(DRAM) of Cisco router. Until now I have decided a memory quote in my experience. However I want to calculate a memory exactly by considering a serial interface that I use

RE: IOS 12.1 Dialer Weirdness

: Try adding the "no cdp enable" to the interface.and see if : that helps. Had : experiences where CDP was causing problems for load : balancing. Also check : if the release of the IOS is a GD or ED. If it's ED, you may want to : down/upgrade to a GD version. I believe the way it works is th

Re: ip and subnet

The way you have it setup means that 2 and 3 floor won't be able to talk to eachother, but the 1st floor will be able to talk to both of the other floors, 2nd and 3rd floor will be able to talk to some hosts on the 1st floor, plus there is a chance of overlapping addresses if your not careful. If

CCNP-2.0 Help.

Hello, I have finished ACRC & planning to complete CCNP in new track. Niot getting enough details about exams & I have downloaded PDf exam objectives from the cisco site. I am not geeting the new book from cisoc press for the various exams Pls help me out. Thank you Rajeev. ___

RE: TCP Connection terminated

This trap is being caused by someone closing a telnet session from the router sending the trap. Jim -Original Message- From: Sent: Monday, June 19, 2000 4:20 AM Subject: TCP Connection terminated Hi, I our company, we have a HP Openview NNM and some Cisco routers (4500, 7200). Afte

Newbie trying to set up a CCNA/CCNP

Hey all, I am a newbie and have access to a couple of routers 1 2501 and 1 2503. I need some advice on the best way to set them up for a lab. In addition, please include any info that you think would be useful to simulate different activities with these routers. I am concerned as to where to

CCNP Exam Order

Just read a couple of articles that recommended putting the CIT exam at the end of the list when taking the tests for CCNP. Anyone think differently, the same? Rob Montgomery CCNA MCP IA Systems Analyst Sytex, Inc./ Naval Special Warfare Command ___ UPDATED Post

RE: collision on cut-through switch

Not a white paper, but let's see whether *I* understand how it's supposed to work Cut-thru waits for the dest addy, then starts forwarding. Frag-free waits for 64bytes, then starts forwarding. Store'n'forward waits for the whole packet and CRC's it, so will only forward truly valid (tm) packe

funny error message

Hi there gang Does anyone know what the hell a IFC is ? I have a client with the following problem and quite frankly Im quite clueless . Its a DEC Brouter with Cisco2000 software on talking to a Motorola . This error message is on the Motorola's side . Any clue would be very helpful . Cheers HO

RE: CCNP Exam Order

Makes sense. The CIT/Support exams are supposed to draw upon the material learned from the previous exams. I plan on taking the Support exam last also. Only got Switching and Support left to take before I get the CCNP. Vijay Ramcharan, MCSE, CCNA -Original Message- From: Montgomery,

Re: ip and subnet

No this will not work, tell us what will happen when a user on floor 1, let's say his ip address is 10.150.25.25/16 tries to ping a user on floor 2 whose ip address is 10.150.100.25/24. The ping will fail, but you need to know why in order to understand why this ip scheme will not work. By the

RE: funny error message

My guess is that it means INTERFACE. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Olden Pieterse Sent: June 20, 2000 11:05 AM To: '[EMAIL PROTECTED]' Subject: funny error message Hi there gang Does anyone know what the hell a IFC is ? I have a clien

Serial over Ethernet

Hello, Is there any way to treat Fast Ethernet Subinterface as Serial ? I have only 2 devices on the Ethernet (cisco router and something else) and want to use IP unnumbered on Cisco router using Loopback interface. Any ideas ? Thank you, Nodir ___ UPDATED Postin

Re: ISDN Configuration - Help

Do a search on 'chap pap' and 'callin' "Aziz Islam" <[EMAIL PROTECTED]> wrote in message 000701bfd544$81014620$[EMAIL PROTECTED]">news:000701bfd544$81014620$[EMAIL PROTECTED]... > Hi Folks, > My ISDN configuration (using an ISDN simulator) does not work for some > reason. Can anyone please give

Re: Rate the CCNP Exams

On a scale of 1 to 4, 1 being the easiest and 4 being the hardest, here is my opinion ACRC-4 CLSC-2 CMTD-1 CIT-3 Tia >From: "Ryan Ward" <[EMAIL PROTECTED]> >Reply-To: "Ryan Ward" <[EMAIL PROTECTED]> >To: "Cisco@Groupstudy. Com" <[EMAIL PROTECTED]> >Subject: Rate the CCNP Exams >Date: Tue,

Re: Memory Calculation

You will find that such a formula will require the specific IOS, feature set available, feature set used, routing protocol(s), interfaces, sub-interfaces, the phase of the moon at installation... (Actually you might not need sub-interfaces! ;) Every formula I have ever seen fails miserably - the

IOS naming convention

Hey, I just sent a note out about synch/asych ports on a 1005 being based on the IOS. Then I came up with this after I deleted the note. Thougth it might be ineteresting to pass on. IOS Naming convention - http://www.cisco.com/warp/customer/620/4.html#version The value of the IOS features

Re: NAT using Windows 2000 Server

Set the internal NIC for Internet sharing and set the clients to do DHCP. That's all...so easy. "Douglas James Howe" <[EMAIL PROTECTED]> wrote in message 8ijc72$b8f$[EMAIL PROTECTED]">news:8ijc72$b8f$[EMAIL PROTECTED]... > I have a cable modem and I would like a clear explanation on how to set u

RE: Serial over Ethernet

> From: Nodir Nazarov [mailto:[EMAIL PROTECTED]] > Is there any way to treat Fast Ethernet Subinterface as > Serial ? My router seems to be fairly clear on what it likes :-) c2610#conf t Enter configuration commands, one per line. End with CNTL/Z. c2610(config)#int e 0/0 c2610(config-if)#ip

Frame relay limitations

Hi all, I asked the group a couple of weeks ago about FR limitations, and didn't get an answer that was complete. However, I have found it on CCO. For those interested in the memory restrictions on routers using FR, check out: http://www.cisco.com/warp/public/125/24.html#24-A Thanks, Dave ___

PPP Multilink question

Hi all, I hope someone can help me understand something about PPP multilink. I was reading up on it, and checking the routers at my job to verify that it was working. Whenever two routers have a dial connection using BRIs and they are configured to use PPP Multilink (PPPM), they work fine and t

Re: cpu utilization & ipx routing

when you do a - show proc cpu - what is using up the greatest precentage? > >i have a weird problem. >it is a 2500 router. >running ipx, apple , and ip. >supporting apple machines with appletalk and ip. >ipx is not needed at all. >i take the ipx routing out then the cpu utilization goes >up 25

Re: Serial over Ethernet

Tony, I am very short of IP addresses and wanted to reduce public IP utilization by 75%. PPPoE is not supported on my routers (I have c26xx). Here is the story - the router will provide internet access to many workgroups located on different VLANs. I am running 802.1q (switch is not from cisco) e

Re: Off Topic - Technical Review, OR What do I know? :->

A Cisco editor would have caught that! ;-) It means prioritize SNA before e-mail, i.e. SNA is higher priority than e-mail. SNA on a LAN is encapsulated in something, such as TCP/IP and Ethernet, (thought that is not at all relevant.) Priscilla At 09:39 PM 6/19/00, Chuck Larrieu wrote: >So, I

Re: Firewalls

You'll probably want to look up performance stats with Cisco and Checkpoint directly, although I would doubt that Checkpoint is faster. Can someone else with more experience on PIX hardware jump in with more information? You also have to look at the cost perspective. Ok, maybe Checkpoint runnin

Re: ip and subnet

This won't work because the subnet for the first floor includes the addresses you are then trying to assign seperately to floors two and three. You first floor subnetwork includes addresses from 10.150.0.0 - 10.150.255.255. So, any traffic from floor one to floors two or three will not be sent to

Passed Support 2.0 - New CCNP !

I just passed the Support 2.0 test with a score of 873. There were 61 questions, 692 required to pass. The test had some confusing questions, but it wasn't too bad. It did not have the technical detail I expected, but it still required very in-depth study. I used the CIT 4.0 course book, th

Thanks all / Books for CCNP2.0

Hi all, THANKS FOR EVERYONE ..I passed my CCNA today with a score of 888. ur inputs have been very valuable to me..Iam planning to start studying for CCNP 2.0 and will be glad if anyone can guide towards good books for CIT 2.0,BSCN , BCMSN AND BCRAN.. THANKS IN ADVANCE.. hari

CCIE Writen Failed again

OK, this is the 2nd time that I've flunked this test. The thing that really gets me is that I actually checked my answers 3 times and felt highly confident about it. 1st question What does that survey at the beginning have to do with determining your score? I mean if you answer low or somethin

Newbie trying to build a lab

Hi all, I have been lurking while I learn more about the Cisco product line and this world of networking. I am trying to build a lab so that I can practice some of the things in my CCNA book. I could use some advice as how to place it all together. Types of set ups that would be helpful, cab

Nota para Infoncenter

Oscar, si te parece, esta es la nota para las NNUU: Sres. Naciones Unidas: A quien corresponda, Certifico por la presente que Infocenter S.A. es proveedor habitual de equipos Cisco tanto para nuestro servicio de procesamiento y autorizaciones, como par

Re: setting mtu size on a 2611

I'm coming in on the middle, so this point may have already been made: You should do the fragmentation and interleaving at the datalink layer with FRF.12 or multilink PPP. Don't set the MTU on the interface for the following reasons: It will cause IP to fragment. The packets will remain fragme

Re: Cisco for Woman?

Life has many obstacles and many ism's, it's the way of the world, sad but true.But a positive attitude has and will continue to change many things. True there are not many women in this area but they are there, in fact just recently while looking for a new job I was interviewed by a woman who

does the exam you get on the ccda depend on the stuff you fill b4 the exam??

I took CCDA today and yes passed. the pre exam tips i got were far from what was on the test...Does the exam pattern depend on what you fill out b4 the test or what...I went in expecting to be able to review past questions but was not allowed and I only expwcted to get 2 case studies and got 5 W

Re: Thanks all / Books for CCNP2.0

See this link, I was in there yesterday and they do look good! I'm sure wherever you are you'll get it cheaper if you try! www.pcbooks.co.uk Karl H. - Original Message - From: "NRS Hariharan" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, June 18, 2000 6:24 AM Subject: Thank

CCIE SNA/IP TRACK

Hi gang! Seems to me that the abundance of Token Ring routers and equipment availability, the fact that IBM is stable and not going anywhere(unless Cisco acquires them), financial institutions and airports? using IBM, that this would be a popular track to follow. I know it's a fairly new special

Todds New Book - CCNA #640-507 Exam

I've got a copy of his new revised version for #640-507 and clearly they are learning from previous incarnations.   It's better laid out, I think clearer, and yes cheaper!  I wonder if it will work more closely with the E-trainer they are advertising?   Karl H.

Cvoice

Does anyone have any pointers or gotchas for the CVoice exam? I am getting to write it next week and would like to know what to look out for? Is there questions on the configuration of ATM, Frame Relay that doesn't deal with the Voice side of things? Any guidance would be much appreciated.. Do

RE: CCIE Writen Failed again

Sorry to hear that you failed the test a 2nd time. If it is really something that you want to do, please do not despair. Perhaps, you may need to alter your study technique. Did you take a seminar/class? Did you participate in a study group? How much study/practice time did you allot yourself

Retransmissions

Hi Group, How can I determine if there is retransmission of packets occuring on my frame-relay network? Any ideas would be greatly appreciated. Will ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscriptio

  1   2   >