A lot has been upgraded since 3.22. Let me guess, you can't find a crack
for anything newer than version 3.22
""Romeo"" <[EMAIL PROTECTED]> wrote in message
90fceq$df2$[EMAIL PROTECTED]">news:90fceq$df2$[EMAIL PROTECTED]...
> Hi there!
>
> Please, from where can I download Boson Cisco Test Pack
Could someone tell me what's the meaning of hub-and-spoke topology?
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
I have been upgrading a couple 3104 routers (2
serial port, 1 ether, 1 BRI) and got them up and running on 11.1 IOS as DTE
devices into an AGS+ operating as a frame-switch. The two 3104's can ping each
other, but can't ping its own serial port. This is the first time that I have
had this hap
Does anyone know if Cisco PIX could provide redundant or fail-over, work
hand-in-hand with HSRP?
Ryan Ngai @ ENT
E-mail: hkngaiExt:6805
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure
Hi..Dear all,
i wonder why I can ping to a site but when I do a traceroute stop half way..
I thought traceroute are based on ICMP as well?? See below
sin-uunet>ping 210.24.136.242
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 210.24.136.242, timeout is 2 seconds:
!
Suc
Hi.. Dear all and Jason,
Thank you teaching me, but I need to ask one more question
I need to know whether my https traffic can be passed thru from my WAN
router to particular site? What command I need to use? I use traceroute to
trace the packet from my WAN router to the site but it failed bu
I have two routers(Cisco 1610). At boot up the first router gave "Loadprog:
bad file magic number : 0x0"
" boot: cannnot load flash"
and the Second router at boot up decompressed the image file and then gave
this error " % error opening tftp://255.255.255.255/1:aaa1317.bin(Timeout )
Sleep
I have two routers(Cisco 1610). At boot up the first router gave "Loadprog:
bad file magic number : 0x0"
boot: cannnot load flash"
and the Second router at boot up decompress the image file and then gave
this error " % error opening tftp://255.255.255.255/1:aaa1317.bin(Timeout )
Sleeping
Hi !
concerning access lists with nat !
is there any problem combining access-lists with PAT ?
i configured PAT on the serial external interface and an outgoing
access-list
on the ethernet interface ( where our customer connects his equipement -
using 192.168.4.x addresses ) - on static mapping
Hub-and-spoke topology refer to the role of router in the networking
world. Spoke router send out request and receive request but not passing
the request from one interface to the other interface in the router.
This function will be perform by the Hub router. For example,
- Router A direct conn
Hi,
Attached are some of the BSCN questions which are creating lot doubts in
my mind. I found these questions on one of the web site while preparing
for BSCN exam. Please help me in understanding them as web site's
evaluation said that my answers were wrong.
Please spare some time for these ques
When you are using 802.1q
DO NOT use the management VLAN (I mean VLAN 1)
Vlan 1 on the ISL trunks is used only for management (as CISCO says)
and Vlan 1 is the default Trunk Vlan on 802.1q.
If you use VLAN 1 on the 802.1q you will find out that big packets (> 1482 )
would not be processed correc
Hope i can answer your questions. Some of the routers disable ICMP
response. Thus, they will not reply you but able to route packet through
and the host you ping to will reply your ICMP packets.
Rgds,
Sam
> -Original Message-
> From: Sim, CT (Chee Tong) [SMTP:[EMAIL PROTECTED]]
> Sent:
Hi,
you can get them from CiscoWorks. there's a directory full of pictures of router, NM
and WIC.
Ben.
-Original Message-
From: jeongwoo park [mailto:[EMAIL PROTECTED]]
Sent: Friday, December 01, 2000 11:49 AM
To: [EMAIL PROTECTED]
Subject: picture of router?
Hi all
Do you know any w
As per my knowledge goes Cisco PIX does not support HSRP, but it does
support Failover. To have this feature you need to have another PIX hardware
of the similar configurations. During normal condition failover unit will
work as monitor. You can also have "statefull" failover wherein active
sessio
Hi everyone,
I looking for an answer to the following questions:
1) How many equal path cost static routes to the same destination
network can a cisco router support.
2) how Can traffic be load shared between two redundant links on 1 to 3
ratio using static routing (i.e. 1 packet on one interfa
Following is the configuration in question:
Process Home
Wife 1 (she is, after all, number one in my book :->)
Nag off
^ you might get an error there, Chuck...I'm not aware of any platform
that supports this configuration. ;-)
BJ
_
FAQ, list archives, and
Ethernet can indeed run at a higher MTU as our discussion showed, in fact we are
trying to get hold of some 2FE cards to do just that, we already run MTU4470 on our
gig to gig links but remember these do not go through any switches but are router to
router only so fixed MTU ports are avoided.
Priscilla Oppenheimer wrote:
> Some sort of maximum is necessary, of course, in order to assure fairness.
> The myths about the maximum having something to do with making CSMA/CD work
> correctly are inaccurate, (not that anyone said that in this thread). The
> myths are a mistake by analogy. T
Weird.
Within UUNET network from AU:
Tracing route to 210.24.136.242 over a maximum of 30 hops
1 110 ms 110 ms 110 ms tnt7.syd2.da.uu.net [63.12.31.206]
2 101 ms 100 ms 110 ms 63.12.150.1
3 100 ms 111 ms 100 ms 351.ATM3-0-0.XR1.SYD2.Alter.Net
[210.80.3.225]
4 100
At 12:01 PM +0200 12/4/00, Elias Aggelidis wrote:
>When you are using 802.1q
>DO NOT use the management VLAN (I mean VLAN 1)
>
>Vlan 1 on the ISL trunks is used only for management (as CISCO says)
>and Vlan 1 is the default Trunk Vlan on 802.1q.
>
>If you use VLAN 1 on the 802.1q you will find out
Did you buy any books to study for the CCIE written aside from what you
studied for the CCNP, or did u just use the boson exams? I recently
finished the CCNP, and I plan on doing the CID this friday I'f I'm lucky.
I wanted to know if I need to get other books or if my current knowledge
with the
Congragulations!! What did you use to study for the BSCN ?
Thanks,
Bharat
""whitaker"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Just passed the BSCN today - thanks to everyone who helped answer my
routing
> questions!
>
> Although I did pass, I'm still
CiscoPress.com is back up, no ODBC erros, 6:17 AM on Monday. But the
products have probably not been populated in the database.. nothing shows up
in any of the catalogs - CCNA, CCDA, CCNP, et al. They're working on it I
guess.. but how's this any different or better than the previous site. I
fail
Gordon,
Congragulations!! And thanks a lot for the input on Boson. Unabashed praise
is quite justified if you feel a product or service has truly WOWed you.. I
think it's very helpful to know that the Boson test was incredibly helpful
in building your confidence and helping you learn what was req
Hello everybody
I need some help with the following:
Given the following
loopback 0
ip address 10.10.10.1 255.255.255.0
router ospf 1
network 10.0.0.0 0.0.0.255 area 0
sh ip route 10.10.10.1
known via connected loopback 0
distributed via ospf 1
10.10.10.1 255.255.255.255
what I want is to
Ciso PIX does not support HSRP, but it support failover by using other PIX
box. You don't require a dedicated Ethernet port. It has a failover port you
to connect two PIX by using this failover port with failover cable
Arvind.
> -Original Message-
> From: Girish G. Pai [SMTP:[EMAIL PROT
Hi All :
I 've don't the cisco note about the MSM install/config.
But, some concept don't know ?
1 ) what is g/0/0/0 -g4/0/0/0 address ? between sub interface
g/0/0/0 is vlan1 or add vlan in sub interface .
2) how to assign the ip address in each interface ant sub interface port
channel 1.x
my company is an internet-provider in austria.
the following situation.
one of our customers has his own network ( with own AS Number ) - currently
he is connected to another ISP. but plans to connect to our network soon..
the problem in here is : if he connects to another ISP - he intends to do
On Mon, 4 Dec 2000, Hussam Adili wrote:
> Hi everyone,
>
> I looking for an answer to the following questions:
> 1) How many equal path cost static routes to the same destination
> network can a cisco router support.
usually 4 by default, but expandable to 6 with the maximum-paths command.
> 2)
I don't understand why they wouldn't build & test this thing in the
background while the old one was still up. It blows me away that they would
post a site with no database content. Why even put it up!? That under
construction message seemed to be fine with them to have it up before, why
the ru
Hi All :
I 've don't the cisco note about the MSM install/config.
But, some consep don't know ?
1 ) what is g/0/0/0 -g4/0/0/0
2) how to assign the ip address in each interface ant sub interface port
channel 1.x
3) how to do the vlan routing between in vlan 1 to vlan 4.
4 )any exiting for me r
Hi all,
A recent thread suggested CiscoWorks 2000 can now run on Windows 2000 Server
platform, and the Cisco web site also says the same thing.
Just wondering if anyone knows of any upgrades to older CiscoWorks 2000
software (the one that runs on Win NT Server 4.0 w/SP5 - and it's not SP5
and ab
I leave in a few minutes to take the CATM 2.1 test. I have been studying
mostly material from the official CATM 2.1 class, cisco.com, and the boson
tests. I have assembled information into study notes that I felt would
help me.
WARNING: This is FAR from complete. I only put down information I
Nod, I found that out when trying to trunk a Foundry FastIron II to a
Cisco router. You can however change the native vlan to something like
say "50", and then that will allow you to use vlan 1 (just not 50).
Brian
On Mon, 4 Dec 2000, Elias Aggelidis wrote:
> When you are using 802.1q
> DO N
It might be just as likely that he has Win2K which has lots of problems
running the current 3.34 tests. I know I had to build out a NT 4 box to run
the current tests.
$0.02
--
John Hardman CCNP MCSE+I
""Clayton Price"" <[EMAIL PROTECTED]> wrote in message
90flq2$327$[EMAIL PROTECTED]">news:90fl
Correct me if I am wrong, but I don't think you can advertise a class C if
the address is assigned to the loopback. Because the router is not aware of
any network, only that address. I believe you would have to assign the ip to
an eth interface (or any other besides lo0) which would be known to th
I don't think the CCDA exam changed.. there's no old version new version
confusion here. I took it about couple of weeks ago - it's still the DCN
test 640-441. Go for it!
Bharat Suneja
""Jeff Douglas"" <[EMAIL PROTECTED]> wrote in message
90ejil$nm7$[EMAIL PROTECTED]">news:90ejil$nm7$[EMAIL PRO
Sam, the first place to start your preparation is on CCO www.cisco.com
Follow the links to certification, and eventually CCIE certification.
Everything you need to know to begin the process can be found there. This
included suggested reading, description of the process, and suggested
preparation
I would say yes. All he needs is a policy which could say for example... if
you try to go to microsoft go through 1 ISP and any other site through the
other ISP.
In all - BGP can do whatever you want it to do - whatever the companies
policy is.
No flames please.
Robert McCallum CCNP CCDP
CCIE W
Dear All,
Can someone plz tell me that does SWITCHING (BCMSN)exam contain ATM Lane
questions??? I have completed my preparation and i m bit confused a bit that
whether to prepare for LANE also or not. Moreover, any sort of final tips as
i m going to have this exam after 3 days. Any sort of hel
Whitaker,
What materials did you use to study?
Raheem
>From: "whitaker" <[EMAIL PROTECTED]>
>Reply-To: "whitaker" <[EMAIL PROTECTED]>
>To: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
>Subject: another one passes the BSCN
>Date: Sat, 2 Dec 2000 13:36:
Young William, I just took BCRAN 24 hours ago. It is still fresh in my
mind. I will attempt to give you my impressions on the exam and how I
prepared.
I read Building Cisco Remote Access Networks by Catherine Paquet (A fine
Cisco Press publication). I also used all three Boson test series cove
The questions are trickier and more detailed than the CCNP. The test also
covers all areas of the CCNP in a single seating.
I studied and sat the test last week. I finally decided to sit the test and
spend the $200 to get a feel for it. I expected a retake in the very near
future, but I passed!
>"Elaluf, Sylvia," <[EMAIL PROTECTED]> wrote,
>Given the following
>
>loopback 0
>ip address 10.10.10.1 255.255.255.0
>
>router ospf 1
>network 10.0.0.0 0.0.0.255 area 0
>
>sh ip route 10.10.10.1
>known via connected loopback 0
>distributed via ospf 1
> 10.10.10.1 255.255.255.255
>
> what I w
"Schimek, Hans" <[EMAIL PROTECTED]> wrote,
>my company is an internet-provider in austria.
>
>the following situation.
>one of our customers has his own network ( with own AS Number ) - currently
>he is connected to another ISP. but plans to connect to our network soon..
>the problem in here is :
> 2) how Can traffic be load shared between two redundant links on 1 to 3
> ratio using static routing (i.e. 1 packet on one interface and 3
> packets on the other.)
I don't believe you can do this.not "balancing" like that. Do you
have something against running
Silvia,
It is possible if you configure the loopback as a point to point
network.
e.g.
int lo0
ip ospf network point-to-point
ip address 172.16.1.1 255.255.255.0
router ospf 1
network 172.16.1.0 0.0.0.255 area 0
Requires IOS 11.3T or 12.0. Stops the loopback from being used
as the router ID
Hi Guys,
I have a question for you.
Is it possibile configure two IP NAT Pool address for the same IP source
class?
We have the requirement of traslate a IP Class to two IP Classes out of our
organization.
Thanks a lot
Regards, Carmelo
_
FAQ, list archives, an
you need to set your telnet command
telnet ip_address [netmask] [if_name]
ip_address = a host or network that can access the PIX firewall telnet
console. Default is internal interface.
"Dinesh B" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi..
>
> I am
now what about the configuration of ipx on the serial interfacesany
suggestions.i am unable to configure ipx on the serials...
>From: "Chuck Larrieu" <[EMAIL PROTECTED]>
>Reply-To: "Chuck Larrieu" <[EMAIL PROTECTED]>
>To: "Taylor, Don" <[EMAIL PROTECTED]>, <[EMAIL PROTECTED]>
>Subject:
When adding an IPX network address to an output-sap-filter I add a 0 for the
service type that is supposed to allow all services, right? I'm trying to
print to a remote site over FR using a HP jet direct printer and HP jet
admin.. It won't print. I sent TAC my configs and they are stumped. I am
wo
Well,
i think you should try the command "ip ospf network point-to-point" under
the loopback.
bye.
-Message d'origine-
De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]De la part de
Elaluf, Sylvia,
Envoyé : lundi 4 décembre 2000 15:11
À : [EMAIL PROTECTED]
Objet : OSPF question
Hell
I've got no problem running the boson 3.34 on win2k. Just as an
intellectual exercise, I searched some of the common crack sites, and found
that the latest crack for Boson tests is for 3.22.
-Original Message-
From: John Hardman [mailto:[EMAIL PROTECTED]]
Sent: Monday, December 04, 200
Paul Borghese <[EMAIL PROTECTED]> wrote in message
003501c05d56$a37b20a0$[EMAIL PROTECTED]">news:003501c05d56$a37b20a0$[EMAIL PROTECTED]...
> Please if anyone has any ideas...
Which is consuming the bandwidth? Mail? Web? News?
If it's mail, you may be able to do something like vger.kernel.org
Hi
I had no problem running it either, until I had to reinstall my Win2K and
start with Boson 3.34. I had in the past just upgraded to the lastest
version, but with a fresh install it stoped working. I have gone thru the
excellent tech support at Boson for the last week and a half and finally
gav
Well, took the switching 2.0 today and passed it, I didn't think it was too
hard and about in line with Routing on difficulty. I think if you study the
course book and the know what's on the requirements from Cisco you will do
fine. I also used the LAN Switching book from the CCIE series but be
Rajesh,
If you want to work for a company that only has one real product and that
product is buggy and being pulled out of most major ISP then look elsewhere
then Cisco (OC-192 and UUnet hehe they yanked those boxes out in a hurry).
If you want to work for the leader in IP (layer 3) joi
I believe, but am willing to be shot down in flames if I'm wrong that
Traceroute uses different port numbers to ICMP. I've allowed ICMP through
firewalls before, then tried to traceroute and the trace has been dropped.
The destination port being dropped was logged as something like 34543 and
incre
Now that I have the native vlan and trunking issue resolved, I'm turning
my attention to another problem.
I have a host that will reside on a vlan all by itself. I've created the
vlan (vlan 200) and configured a fast ethernet port to be a member of that
vlan, and attached the host to it.
The po
Here is the scenario...
A 2600 series router is connecting multiple offices
in the same location to the Internet. The offices are seperated via VLANs
on a Cisco 3500 series switch with ISL Tunk links to the router which is running
IP Plus. The IP Subnets are 10.0.1.0, 10.0.2.0, 10.0.3.0,
Its been a while, but thinking back, I don't believe so. And if it did,
it was so little I wouldn't worry to much on lane.
Spanning Tree, VLANs, EtherChannel, MultiLayer Switchingthats the
type of stuff you want to study up on
On Mon, 4 Dec 2000, Waqar M wrote:
> Dear All,
>
> Can so
You know, Cisco's ConfigMaker handles the 26xx series as well as the WIC
cards. It will guide you through a wizard and then make the config for you.
You can use this to see how to do things that you don't know.
-Original Message-
From: lawrence sculark [mailto:[EMAIL PROTECTED]]
Sent: Mo
Getting traffic off the net in a somewhat balanced fashion is the easy part. Finding
a way to have equal amounts of it traverse multiple AS's and end up at two differing
entry points into the AS is the stuff of GODS :)
Pete
*** REPLY SEPARATOR ***
On 12/4/2000 at 4:07 PM
I would concur that the written is not a challenging test. If you've managed to get
through the NP cert, you should be able to pass with little (if any) additional prep
work. I do recall more IBM technology stuff on the written than in the NP track so
checking into that would help.
I too w
In order to advertise the loopback interface as /24 instead of /32 you
should use the command interface: ip ospf network point-to-point.
Regards.
Hugo, CCIE
>From: "Howard C. Berkowitz" <[EMAIL PROTECTED]>
>Reply-To: "Howard C. Berkowitz" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject:
Chuck,
I've not heard of anyone with a perfect working solution.
I tried similar config (Version 1) with Wife hardware which eventually fell
over completely.
Did try Switching temporarily just prior to this failure, but remedy was
temporary and caused further problems through incompatibility with
guys !
i have two routers connected through their serial , im configuring rip on
them
R1 e0 ip add is 172.16.1.1/27
ser 0 ip add is 172.16.1.33/28
R2 e0 ip add is 172.16.1.49/29
ser 0 ip add is 172.16.1.34/28
there is no rip updates between the two routers ..im getting only
"suppressing null
Under the loopback interface, you may issue the command ip ospf network
point-to-point
Cisco's implementation by default advertises loopbacks as host routes
( /32 )
By implementing the network type point-to-point, you cause the IOS to
advertise a loopback as a full network, as defined by the sub
Which RIP version are you using? IIRC, version 1 doesn't support VLSM since
it doesn't carry subnet mask info in its routing updates.
---JRE---
"Mohamed Heeba" <[EMAIL PROTECTED]> wrote in message
91B200CBBEC3D111992A00805F31E6CB880765@MINAMAIL">news:91B200CBBEC3D111992A00805F31E6CB880765@MINAMA
Has anyone read Designing Network Security (ciscopress), and can comment
on its applicability to the MCNS exam? I purchased it and intend to use
it to study for the exam. Reviews at amazon are good, but I just don't
know how well it aligns with the test objectives.
Brian
Hi,
Let's imagine that you have a L3 switch with a segment (x) serving a
(actually more) router feeding another segment (y). The L3 has other BVIs
(w and z).
Let's also imagine that one has a server belonging to the routed segment y,
(y.1) Let's also imagine that the server has crashed, and nee
Hi all...
I have a slight problem and I know you people can help. I have a
question regarding OSPF behavior and the loopback address. Our backbone is
running OSPF and we have installed a Cache-Flow server to cache webpages.
The cache-flow does not support OSPF so I attempted to redistribute
"Patrick W. Bass" wrote:
> Do so at your own peril.
>
> ""Frank Wells"" <[EMAIL PROTECTED]> wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hey Folks,
> > Can I put a non-Cisco ethernet card (Intel/3com) in my PIX 520 as a third
> > interface, and if so, how does one load the
There wasn't any on the one I took back in late August. Add trunking to the list
mentioned below.
--Scott Strand
CCNP
Brian wrote:
> Its been a while, but thinking back, I don't believe so. And if it did,
> it was so little I wouldn't worry to much on lane.
>
> Spanning Tree, VLANs, EtherChan
hi
it is ver 1 rip , i know it will not carry mask info , my questing is if the
mask is inconsistent , will it send updates or not ??
thx
> -Original Message-
> From: Jim Erickson [SMTP:[EMAIL PROTECTED]]
> Sent: Monday, December 04, 2000 12:01 PM
> To: [EMAIL PROTECTED]
> Subject:
Patrick:
could you go into more detail, as to why it is well worth it??
thanks,
Jess
<< Send him a e-mail he will reply with the password, i also suggest buying
whathe has to offer it is well worth it
Patrick
>>
___
This may be more info than you want, but here is some info I've put togther
that I plan on using in one of our training classes.
Cisco 6500 Series MSFC Native IOS Layer 3 Switching
This concept blends switching and routing into one platform. The Native IOS
mode on this platform allows the s
Does anyone know where there is a CHAT room for CCNA's that is open 24 hours
a day, 7 days a week??
TIA,
Jess
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTE
Most versions of traceroute (including Cisco's I believe) use UDP echo
packets rather than ICMP echo. There may be a router or a firewall that is
blocking the UDP echoes while allowing the ICMP echoes through. Microsoft's
tracert command in Windows 95/98 uses ICMP. You might want to try the same
t
Hi,
I quite agree with vtam,
>From p.376 of "Internet Routing Architectures" Sec. Edition,
ip as-path access-list 4 permit ^1 ?[0-9]*$
This has some side effects, which allow as-paths such as 109, 110, 120
like vtam has pointed out, in addition to "all the AS paths that start
with 1 and tha
use
route maps and policy routing
-Original Message-From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Perry LucasSent:
Monday, December 04, 2000 11:18 AMTo:
[EMAIL PROTECTED]Subject: Help with Access
List
Here is the scenario...
A 2600 series router i
interface loopback 0
ip ospf network point-to-point
!
that'll make it push it out as a /24, not /32.
On Mon, 4 Dec 2000, Elaluf, Sylvia, wrote:
> Hello everybody
>
> I need some help with the following:
>
> Given the following
>
> loopback 0
> ip address 10.10.10.1 255.255.255.0
>
Title: RE: High availability with Cisco PIX.
No flames for suggestion a non-Cisco box please. But, I heard RadWare has a firewall loadbalancing appliance so you can have 2 active PIX's instead of using the PIX-FO option. I have not used it nor heard anything about it..but it may be an option
Thanks, I will.
Jeff
""Bharat Suneja"" <[EMAIL PROTECTED]> wrote in message
90gcmr$2ce$[EMAIL PROTECTED]">news:90gcmr$2ce$[EMAIL PROTECTED]...
> I don't think the CCDA exam changed.. there's no old version new version
> confusion here. I took it about couple of weeks ago - it's still the DCN
> t
Title: RE: More on VLANs
You need to enable routing for that VLAN interface with the mls command.
Example
interface vlan 200
ip address 10.1.1.1 255.255.255.0
mls rp vtp-domain
mls rp ip
Patrick Greene
-Original Message-
From: Ben Hockenhull [mailto:[EMAIL PROTECTED]]
Sent: Mond
Does anyone know of a way to implement 100BaseT between 2 buildings that are
¾ (~ 4100 feet) of a mile apart? I think the distance limitation per
segment is 200 meters.
Thanks
Stan Rossetti
Russia Services Group
Voice: (256) 544-5031
Email: [EMAIL PROTECTED]
Beeper: 544-5031 pin 0112
C
I believe, and am very prepared to be proven wrong, that when sending the
update it *should* assume the mask of the sending interface since it is in
the same classful network. If it were in a different classful network, it
would assume a classful mask of 255.255.0.0.
However, it seems to be actin
Fiber in the middle, UTP-fiber converters on the ends.
---JRE---
""Rossetti, Stan"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Does anyone know of a way to implement 100BaseT between 2 buildings that
are
> ¾ (~ 4100 feet) of a mile apart? I think the di
You can also summarize the route
-Eddie
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Paul Schultz
Sent: Monday, December 04, 2000 6:31 PM
To: Elaluf, Sylvia,
Cc: [EMAIL PROTECTED]
Subject: Re: OSPF question
interface loopback 0
ip ospf network p
On Mon, 4 Dec 2000, Mohamed Heeba wrote:
> guys !
> i have two routers connected through their serial , im configuring rip on
> them
>
> R1 e0 ip add is 172.16.1.1/27
> ser 0 ip add is 172.16.1.33/28
>
> R2 e0 ip add is 172.16.1.49/29
> ser 0 ip add is 172.16.1.34/28
>
> there is no rip updates b
There isn't any questions on ATM LANE which i take on this
year Sept papers. Good Luck
Rgds,
Sam
> -Original Message-
> From: STRAND Scott [SMTP:[EMAIL PROTECTED]]
> Sent: Tuesday, December 05, 2000 4:39 AM
> To: Brian; Waqar M
> Cc: [EMAIL PROTECTED]
> Subject: Re: ATM Lane in
Yes
At 09:46 PM 12/3/00 -0600, you wrote:
>Has anyone ever taken a Cisco course, and they give you a 3 ring binder
>(not a spiral) with hole punched pages that go into it. And the pages are
>NOT color, but just like black and white/xerox? Or are the pages in the 3
>ring binders suppose to be c
Yes. I agree with Philip static route will not support load uneven balancing
but
EIGRP will. Static route will send out the packet in rotating basis and
ignore
the BW define.
Q 1. Up to 6 static routes can be supported by Cisco IOS.
Rgds,
Sam
> -Original Message-
> From: Phillip Heller
i believe that i shouldnt use different masks on Ripv1 router , i was trying
to check if the mask will be changed on the other end of the connection
(which is right :)) , although now this doesnt have any meaning since the
serial link should aslo have the same mask of the ethernet subnet of the
so
In a message dated 12/4/00 7:03:49 PM Eastern Standard Time, [EMAIL PROTECTED] writes:
Patrick:
could you go into more detail, as to why it is well worth it??
thanks,
Jess
Well I didn't see the original post but from the subject line I would say it's deffinately well worth it. Why? It's free
More generally, hub and spoke topology just refers to a configuration with
a central site (which could be a single router, a collection of networks,
or a whole campus) which has remote sites connected to it, but where the
remote sites do not connect to each other directly. So if you draw a
diagra
For traceroute, Cisco and most Unix platforms use an outgoing frame that
goes to a large UDP port number, starting with 33434. This allows the frame
to get past routers and to the end station, which should send a Destination
Unreachable, Port Unreachable.
Newer vendor implementations (like Mic
On Tue, 5 Dec 2000, Mohamed Heeba wrote:
> i believe that i shouldnt use different masks on Ripv1 router , i was trying
> to check if the mask will be changed on the other end of the connection
> (which is right :)) , although now this doesnt have any meaning since the
> serial link should aslo h
how can yu monitor a dhcp server to ensure that it is operating
correctly...??
any suggestions...
can you monitor it from snmp, do you need sms for nt to monitor ists
services...can you only monitor or test from the server itselflawrence
>From: Benjamin Walling <[EMAIL PROTECTED]>
>Reply-T
1 - 100 of 137 matches
Mail list logo