Priscilla, that's a fascinating report - I don't suppose you know of any
more recent work along the same lines?
I was interested to note that maximum throughput happens with two hosts.
Gee whiz! A switch connection :-)
JMcL
-- Forwarded by Jenny Mcleod/NSO/CSDA on
Doesn't sound like a 2501 to me - they don't have BRI interfaces. Did you
mean a 2503?
I'm not quite clear on your setup, but anyway...
No, you can't use a serial interface to connect to a LAN.
No, you can't add more LAN interfaces to a 2500 series router. They are
fixed config, not modular.
so 12.0
Jason What version of IOS is used in the CCIE lab exam? Cisco's site
says IOS
features up to and including version 12.0 will be tested on the exam.
What version should I load on practice lab routers?
FAQ, list archives, and subscription info:
I have some notes scrawled in my copy of the BCRAN book. They tell me that
initiate is the IOS 11.2 command, and request is the 12.0 command. I have
no idea where I got this from - maybe the command references or the dial
cookbook.
I also have a note saying that initiate is used for non-RFC
Back to back Frame Relay sample confiugration
More Configuration can be find in cisco website
RouterA
interface Serial0
no ip address
encapsulation frame-relay
no keepalive
!--- This command disables LMI
!--- processing.
clock rate 64000
!
interface Serial0.1 point-to-point
!--- A
Hi all,
Which among the many are the best books with which one can comfidently
prepared for both the CCIE written and Practicals (Routing Switching).
I will be glad to receive the complete sets of necessary books and resources
for this all important examination especially from those who have
Is anyone aware of a good CCIE led; CCIE-Lab preparation training conducted
in
the Boston area - I know that Marc's cciebootcamp is awesome but I was
hoping
for a 'hands-on' session in a run up to the Lab ?
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=2230t=2230
Hi Guys,
is there a way to bundel 2 phsical ISDN lines to act as one (BRI0 and BRI1)
and have a totla of 256k
Regards,
Tarry
--
GMX - Die Kommunikationsplattform im Internet.
http://www.gmx.net
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=2232t=2232
As usual Cisco has released a great book for the CVoice test from Cisco
Press and then cancelled the cert a month later. Better late then never
right? Its called Cisco Voice over Frame Relay, ATM and IP ISBN
1578702275. This is the book to based on the CVoice course...
Dave Cooper - CCNP,
Hi,
The easy way is to get a Adtran NT2 with 2 u ports and S/T port. This
combines the bandwith.
Thanks,
Sal
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
[EMAIL PROTECTED]
Sent: Friday, April 27, 2001 7:59 AM
To: [EMAIL PROTECTED]
Subject: 2 phsical
Hi,
I enabled Stack group bidding protocol (SGBP) for
Multichassis MPPP in one of the 5300s. Although nobody
is connected as MPPP some dial-up customers are
connected as virtual PPP some are asych like I posted
below;
Line User Host(s) Idle
Location
230 tty
Thanks for everyone's input on this. I'm familiar with the 2900 line, and
know the 1900 models are for the 'budget minded'. I'll have to see what kind
of functionality I get out of its little command line option, see if it's at
all like the real thing.
Thanks,
Kris.
-Original Message-
I suggest you call the administrator for the facility that you intend to
write and ask. They tend to be very helpful in matters such as this. I
would definitely study 12 builds though.
Pete
*** REPLY SEPARATOR ***
On 4/27/2001 at 1:55 AM Jason wrote:
What version of IOS is
I found that the Boson CCIE practice tests were extremely close to the real
CCIE exam. I highly recommend them.
Fred
From: Favio Tavarez
Reply-To: Favio Tavarez
To: [EMAIL PROTECTED]
Subject: boson's CCIE written tests ?'s [7:]
Date: Fri, 27 Apr 2001 01:32:37 -0400
hello all
How good
hi
ppp accept
this is the command at call-back server
ppp request
this is the command at call-back client
bye
[EMAIL PROTECTED] wrote:
I have some notes scrawled in my copy of the BCRAN book. They tell me that
initiate is the IOS 11.2 command, and request is the 12.0 command. I have
no
hi
send me your run configuration.
i will check it our.
bye
ravee
Hans Stout wrote:
Hello colleagues,
I have a Windows 95 client that I want to be able to dial in to a Cisco
1603. The Cisco 1603 is configured for callback accepts. The problem is that
the client dials in, the call is then
Interesting
In light of the recent shooting in Santee, California,
let's see, I think it started when Madeline Murray
O'Hare complained she didn't want any prayer in
our schools, and we said OK.
Then someone said you better not read the Bible in
school the Bible that says thou
Many different version 11.x to 12.x
Louie
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Jason
Sent: Friday, April 27, 2001 12:55 AM
To: [EMAIL PROTECTED]
Subject: CCIE IOS version?? [7:2223]
What version of IOS is used in the CCIE lab exam? Cisco's
Took the CCIE written on Monday and passed. Used both Boson 1 and 2. Found
both tests to be excellent prepping material. Kept a tally during the test
of the number of questions that were similiar to both the test and Boson -
number was over 40! One note though- large percentage of the
Try www.mentortech.com
Look for the ECP course. CCIE prep training really doesn't get any better
than that class.
Tony M
#6172
-Original Message-
From: Ajit Mohanraj
To: [EMAIL PROTECTED]
Date: Friday, April 27, 2001 3:32 AM
Subject: Good training centre in and around the Boston area
Hi Everyone,
The company I am working for is considering purchasing Cisco ACS
software. This piece of software will be running on Solaris platform.
Currently, I am using TACACS+ (self-supported software with source code)
on our environment running on both Solaris and linux platforms (Primary
I do think this message is quite funny. The real problem with this
country is everyone blaming someone else for their actions. Just worry
about taking responsibility for yourself, and don't preach to me about
what you think is right and wrong. I've seen plenty of nudie magazines
and violent
just to stir the pot a little... :-)
He could have a 2524 which has one ethernet port and one ISDN port and then
there are two slots for modules - so one version of 2500 is modular :-)
Unfortunately they are WAN modules not LAN modules so it still doesn't help
the poster get another
Maganda to kaya basahin ninyo na lang.
- Original Message -
From: larry bird
To:
Sent: Friday, April 27, 2001 4:03 PM
Subject: fridays not-so funny [7:2241]
Interesting
In light of the recent shooting in Santee, California,
let's see, I think it started when Madeline Murray
Dear all,
My old 7507 is having a minor problem it is 12.0.16GD, RSP2 with
64M ram and the ATM card is an AIP. I have only one VC associate with
this ATM port.
I found quite a number of input errors (CRC and Frames)... how can I
know the source of that problem?? Is it the cell level, or the
I can get a Catalyst 1924 with the enterprise software for $600. I can also
get the Add-on modules (Fibre or copper), but I don't know what they are
worth. Anybody know what is a fair price for these ?
Thanks,
Ejay
BTW, He's got a lot of these modules. If anyone else wants some, let me
know
Hi everyone ,
I just cleared BCRAN today with 875, the first test towards CCNP
certification and my third Cisco test after CCNA and CCDA, the test was
fairly simple , though I do not have a long exposure on routers , I have
only worked on simple ISDN configurations on the 2600 series for my
Sorry if it sounded like I was guessing.. :-}
Played with issue again last night. Every time that I have seen UP/Down
the cable was detached etc. We install/move/remove a lot of equipment
and it is always up/down...
The line protocol is dependent on the keepalives. Just try a no keep
on the
Quick question for you all. If you were to break a Frame Relay
connection going into a router by first plugging it into a hub, then
connecting it to the router, for the purposes of plugging a sniffer into
that hub to monitor all frame traffic, would this scenario work or not so
much? Thanks for
Ejay,
The 1924's are not modular, and they sell on e-bay for as low as $450.
I just picked up a 2912XL-EN for $650. All 12 ports are 10/100, and it
has a faster CPU.
HTH.
Elmer Deloso
-Original Message-
From: Hire, Ejay [mailto:[EMAIL PROTECTED]]
Sent: Friday, April 27, 2001 9:58 AM
To:
unfortunatly ,
there i no one emcompassing book that will get you through the test/lab.
but i will tell you what i am using for the above.
WRITTEN
Boson CCIE test 2
Token ring white paper.CCPREP.com
CCIE Cramsession www.cramsesion.com
IP routing Vol 1 DOYLE
Caslow`s
Guys,
i`m looking for a good explanation of what this is...
i looked on the archives and cisco site,but beleive i am bieng thick .
according to cisco the bit rate comes in various flavours
UBR,VBR,CBRbut am i getting this complete leg-before-arm
i thought the bit rate was a messunment of
Sorry about That All. They are 2924's, not 1924. (I really need to study
less after midnight.)
The corrected Message should read:
I can get a Catalyst 2924-XL-EN with the enterprise software for $600. I
can also get the Add-on modules (2 port Fibre or 4 port copper), but I don't
know what
Edmund,
The Cisco Packetized Voice Data Integration by Robert Caputo is a great
reference. I also like Integrating Voice and Data Networks by Scott Keagy.
The cvoice test realy hits hard on dial-peer's, voip and vofr. There were
some voatm questions but they were few and pretty generic.
I
Hi,
We have been using Cisco ACS for NT for 1 year. It is very easy to configure
and learn it(easier than source code I suppose), but it is not stable
software, sometimes it stops. Sometimes some functions does not work well,
but the source of the problem might be the operating system(NT). I did
Frame over serial? (T1/Ds1/Ds3) They would have to plug into a Network
analyzer with a compatible interface, not a hub. Most hardware network
analyzers have pass-through connections that let you plug through the
analyzer to the router.
Good Luck,
Ejay
-Original Message-
From: Rizzo
Here is the main CiscoWorks Page...
http://216.13.129.235/smPage?k=389389278t=psrlevel=client_html/22/v2/detai
lsku_id=1177parent_id=111
Here's the training CD information (Part # TRNG-800160 ). The price is $10+
shipping...
Phil
- Original Message -
From: Niraj Palikhey
To:
Sent:
The 2900 modules usually sell for less than a $100 a piece on Ebay. $600 is
awesome price for a 2924. I paid something like $900 on Ebay, but mine was
a new model (no uplinks though)...
Phil
- Original Message -
From: Hire, Ejay
To:
Sent: Friday, April 27, 2001 10:41 AM
Subject: RE:
I have a pix that protects my internal network from vendors. So the
internal lan interface is Inside and the interface to the vendor is Outside.
There's a full conduit allowing anything from the vendor's network
(Outside) into our Inside network. I'm sniffing the wire on the Inside now
Hi Guys,
anyone do you know electromagnetic interference with network devices
documents?
Can you tell me?
Best Regards,
Carmelo
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=2264t=2264
--
FAQ, list archives, and subscription
I am in a similar situation. The link below provides some good reading, but
nothing definitive. I think the type of bit-rate depends on many factors :
1) Type of traffic (real time, non-real time, bursty, constant)
2) Type of VC (switched or PVC)
3) Traffic shaping capability
4) ATM networks
The RJ45 connection between the DSU/CSU and the wall jack. Would putting a
hub between the two work? Then I could place a sniffer on the hub.
-Original Message-
From: Hire, Ejay [mailto:[EMAIL PROTECTED]]
Sent: Friday, April 27, 2001 11:00 AM
To: [EMAIL PROTECTED]
Subject: RE:
A woman pregnant with triplets was walking down the street when a masked
robber runs out of
a bank and shoots her three times in the stomach.
Luckily the babies are okay. The surgeon decides to leave the bullets in
because it's too risky to
operate. She gave birth to two healthy daughters and
From listening to the guys @ work (I believe Cisco lists this too), it will
be no less than 11.2 IOS. A coworker came back after his first attempt
changed all his lab routers to 11.2(18) Enterprise, to get use to the
defaults. I'm guessing (actually I was told) the trick is to lock down all
I'm currently having a discussion with a fellow employee who passed the
CCIE Written about a year ago. Has no plans to take the lab, but that's
neither here no there. He claims that when RIP is enabled on a router it
floods it's updates out all interfaces on the router by default. I was of
the
Ayn Rand is preferable to Cisco Press books. Just as long as some of them,
but not as dry :-)
--
James Haynes
Network Architect
Cendant IT
A+,MCSE,CCNA,CCDA,CCNP,CCDP
Circusnuts wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
From listening to the guys @ work (I believe Cisco
Hello everybody.
I want to monitor my cisco switch (2900 series)
But I dont know how to create configuration file for switch by using MRTG.
I will appreciate if some body can send me step by step guide to monitor my
switch by using MRTG.
Thanks
Tariq Bin Azad
Message Posted at:
At 10:39 AM 4/27/01 -0400, Stephen Skinner wrote:
Guys,
i`m looking for a good explanation of what this is...
i looked on the archives and cisco site,but beleive i am bieng thick .
according to cisco the bit rate comes in various flavours
UBR,VBR,CBRbut am i getting this complete
If your sniffer is a WAN sniffer, you could use a V35 Y cable between the
CSU and
the router. If it is a LAN sniffer, you will probably have to plug it into
the
hub or switch that your router connects to.
-Original Message-
From: Rizzo Damian [mailto:[EMAIL PROTECTED]]
Sent: Friday,
RJ45 does not equal Ethernet. Are you thinking of placing an ethernet
hub there? If so, you have completely incompatible physical layers to
begin with. A T-1 signal from a csu/dsu or an NIU is going to wreak all
sorts of havoc on an ethernet hub, most likely.
You also have completely
Are you and/or your vendor running NAT?
-Original Message-
From: SH Wesson [mailto:[EMAIL PROTECTED]]
Sent: Friday, April 27, 2001 11:21 AM
To: [EMAIL PROTECTED]
Subject: PIX and sniffing [7:2265]
I have a pix that protects my internal network from vendors. So the
internal lan
At 02:30 PM 4/27/01, you wrote:
I know of one instance Priscilla,
no keepalives configured on the interface will do an Up, Down. I little
trick I learned doing labs.
Tony M
#6172
What I'm trying to find out is in what cases Cisco says that the interface
is up even though there is no cable
I guess that depends on what interests you. I found Ayn Rand to be an
excellent
replacement for sleeping pills but any kind of networking book can keep me
up all night.
Jonathan
James Haynes wrote:
Ayn Rand is preferable to Cisco Press books. Just as long as some of them,
but not as dry :-)
unsuscribe
Mo Durrani
IST
WYSE\EDS
phone:408-473 1246
[EMAIL PROTECTED]
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=2280t=2280
--
FAQ, list archives, and subscription info:
Katson,
Also paste following outputs from router port of switch where its
connected :
- show run
- show controller atm 0/0
- show run (on switch )
- show interface atm x/y ( on switch, which is connecting to router )
- show controller atm x/y ( on switch, which is connecting to router )
Hello everybody.
How to check IOS ver in catalyst 2900 XL switches ???
Sh version can not show me IOS version in user mode.
Tariq
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=2283t=2283
--
FAQ, list archives, and
That sounds a little strange. I just tried it in user mode and it
worked great. Has someone implemented security on that switch blocking
your from access to certain commands?
Tariq Bin Azad 4/27/01 10:33:41 AM
Hello everybody.
How to check IOS ver in catalyst 2900 XL switches ???
Sh
THANKS! Please ignore my other message that said I was down, down because I
didn't have a real answer yet. You are terrific!
Priscilla
At 10:10 AM 4/27/01, you wrote:
Sorry if it sounded like I was guessing.. :-}
Played with issue again last night. Every time that I have seen UP/Down
the
Hi All
I am starting on my CCNP certification today. Do any of you have some good
websites containing good material regarding CCNP.
Brett Hairbottle
Network Administrator
CCNA
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=2286t=2286
unsubscribe
Quinton Clark
Internet Systems Engineer
Exodus Internet
Tel : 0808 100 3963
[EMAIL PROTECTED]
-Original Message-
From: Priscilla Oppenheimer [mailto:[EMAIL PROTECTED]]
Sent: Friday, April 27, 2001 5:47 PM
To: [EMAIL PROTECTED]
Subject: Re: FastEthernet is up, Line protocol
We are currently experiencing a DOS attack where the attacker is sending
ICMP Requests, say 40 a second, to an address on our network that does not
have a device hooked up to it. Looking at the tcpdump, all it is is a bunch
of requests, no replies, no unavailables, etc. Even though it's not
What 2900XL are you working with. I just did a SH VERS on a 2916M and is
showed everything.
I was in user mode when I ran the command as well.
Jason Coleman - CCNP, CCDP
Customer Engineer
-Original Message-
From: Tariq Bin Azad [mailto:[EMAIL
sh ip interfaces.
CCNP, MCSE
--- User wrote:
sorry - i meant without looking at your config
User wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi,
How could one see that there is no ip
forward-protocol udp command in
your
configuration
Thanks in
what hotel would you recommend ? thanks
Urooj's Hi-speed Internet wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I have only been to the Halifax site. It has cheap hotels (if you are
spending in US $$), five-minute walk to the CCIE lab, very fair and
friendly
Proctors, plus
My understanding is that when you enable RIP, it will broadcast the route
table out all interfaces where IP is running. The network statement is used
to designate which networks are added to the route table.
Example:
E1 = 10.1.1.1 /8
E2 = 11.1.1.1 /8
E3 = 192.168.1.1 /24
Router rip
Network
The new exam covers a few more area like voice, security and QoS!!
Arthur Stewart wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
I will be taking the CID test pretty soon and was wondering what it was
like.
I noted that the beta test scores seem to be out and in the past,
Hi,
We are having problem to browse this website:
www.sitemeter.com
Internet explorer will say Opening page http://www.sitemeter.com; in the
status bar on the bottom and the page never came up. It came back with
error:
The page cannot be displayed
We are able to browse the site using dialup
Go find the power supply for 1605. I hope it would keep you busy for
some time.
/felis
John Brandis wrote:
G'day all
I am here at work with nothing to do. I have a 1603 router spare in front
of
me, and a 1605 (with no power suply). Can anyone give me some idea's so I
can
either practice
You probably already saw Jennifer's post on the separation of rxload and
txload and adjusting the load interval.
After I saw her post, I looked up 'load-interval' and saw something
relatively surprising: The example of the using load fraction was to
provide a mechanism for enabling dial backup,
Thx for the answers. I guess we both learned something. I thought it was
only interfaces who's major network was being advertised, he thought it was
any interface IP enabled or not. Learn something new everyday.
--
James Haynes
Network Architect
Cendant IT
A+,MCSE,CCNA,CCDA,CCNP,CCDP
Coleman,
Hello everybody.
I want to divide bandwidth between my all VLAN users.
Here is my network architecture :
Internet ---ISP ADSL router My
Cisco 2600 router --Cisco Catalyst 2900 switch
--VLans
Internet
unsubscribe cisco
-Original Message-
From: EA Louie [mailto:[EMAIL PROTECTED]]
Sent: Friday, April 27, 2001 2:21 PM
To:
Subject: Re: Utilization/load Calculations [7:2167]
You probably already saw Jennifer's post on the separation of rxload and
txload and adjusting the
If anyone has a router to do debugs on, please check this. The Cisco
documentation says that it only sends out RIP updates on the networks (and
thus, interfaces) indicated as part of router rip, which makes perfect sense
to me.
from
Does anyone know how to upgrade a 3000 Router to a Cisco 2501.
What Boot Proms do I need. Where can I purchase the boot Proms.
And Flash memory.
--
Carl Hensley
[EMAIL PROTECTED] - email
(703) 234-3987 x1268 - voicemail/fax
__
FREE voicemail,
So, does this mean it should really be called 80BaseTX/FX because of the
20% overhead introduced by 4B/5B? :)
Prof. Tom Lisa, CCAI
Community College of Southern Nevada
Cisco Regional Networking Academy
Priscilla Oppenheimer wrote:
4B/5B is a signal encoding scheme. It's used in 100BaseTX
More info on this:
When we by pass PIX (plus in a laptop to a hub between PIX and Internet
router). We CAN browse www.sitemeter.com.
Behind PIX, we can ping www.sitemeter.com and get 100% reply from
216.167.17.2. But we CANNOT browse using IE.
Route is going to the correct gateway, do not have
That's what I thought. I'll try doing a test at home on my setup and see
what it yields.
--
James Haynes
Network Architect
Cendant IT
A+,MCSE,CCNA,CCDA,CCNP,CCDP
EA Louie wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
If anyone has a router to do debugs on, please check this.
unsuscribe cisco
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=2309t=2309
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL
Cisco Press books are enough to pass CCNP
Brett Hairbottle wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi All
I am starting on my CCNP certification today. Do any of you have some good
websites containing good material regarding CCNP.
Brett Hairbottle
Network
I don't know if this is just me, Why, do the recruiters always asked
when
you indicate, CCNP in progress on your resume When will you have it
finished?
Is that going to make a difference whether I qualify for a position or
not?
I have two other major certifications and 4 years experience in the
Anybody know a good book for this Exam?
I can't seem to find one.
Thanks!
Mike Bambic
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=2311t=2311
--
FAQ, list archives, and subscription info:
Can a 2511 be setup to connect a cable modem (ethernet) to a network segment
(ethernet)? I was going to use a 4000 but I do not have the flash
requirements to run 12.1 code so that I can make use of the ip address
dhcp. Can I use one of the Async ports to connect to the cable modem end
That seems like a valid question to me. Assuming that these certs are a
useful tool for recruiters and HR personnel to measure a candidates
skill, then I would say there is a big difference between someone who is
just picking up his first book to begin CCNP preparations and someone
who is about
Mike,
Try Cisco Voice over Frame Relay, ATM, and IP
Author: Steve McQuerry, CCNP SRP: $60.00
ISBN: 1578702275 Pages: 500
Pub Date: Apr 2001 Media: none
http://www.ciscopress.com/book.cfm?book=184
--
Edward J. Gomez, MCSE, CNE, CCNA
Information Systems Manager
ProxyMed, Inc
2555
It's 25% in the other direction (125mbps).
But I'm thinking you already knew that?
DaveC
Tom Lisa wrote:
So, does this mean it should really be called 80BaseTX/FX because of the
20% overhead introduced by 4B/5B? :)
Prof. Tom Lisa, CCAI
Community College of Southern Nevada
Cisco
There is one model in the 3200 series that is not upgradeable. (3202?) It is
the one with one serial and one token ring port. Someone please tell me I'm
wrong, as I've got a couple of these.
Ejay Hire
-Original Message-
From: Carl Hensley [mailto:[EMAIL PROTECTED]]
Sent: Friday, April
quick answer - no
The connection to the cable modem is ethernet. Don't get confused by the
term modem.
You need a router with 2 ethernet ports.
Kevin Wigle
- Original Message -
From: Roberts, Timothy
To:
Sent: Friday, April 27, 2001 3:52 PM
Subject: 2511 between cable modem and
Both but mainly a cell level issue:
If you lose a cell, it will screw-up the AAL5 frame. Thus causing the
frame and/or CRC errors seen in sh int.
You are really moving some traffic. Is this PVC traffic going across
any links that may be congested? A DS3 perhaps? Need to find where the
Does anyone know if this follows the CVOICE course material/objectives
closely?
Tony
Edward Gomez wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Mike,
Try Cisco Voice over Frame Relay, ATM, and IP
Author: Steve McQuerry, CCNP SRP: $60.00
ISBN: 1578702275 Pages: 500
Pub
Could you let me know what type of questions to expect for the BCRAN 2.0
Taking it Next Sunday !
Yikes!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=2322t=2322
--
FAQ, list archives, and subscription info:
You guys are correct. I continued to try and find a doc that supported my
understanding only to find that I was wrong.
We setup a lab environment with the following setup.
E1 = 192.168.1.1 /24
S0/0 = 10.1.1.1 /8
Router Rip
Network 10.0.0.0
Debug ip rip
The debug trace shows RIP updates only
If you can take the link down it might be useful to do some loopbacks to see
if you can isolate a link or equipment failure. I seem to remember seeing a
procedure for that in the CCIE All-in One lab book.
-Original Message-
From: [EMAIL PROTECTED] (Katson Yeung)
[mailto:[EMAIL
I'm interested in seeing the solution to this one. I had an old point to
point T1 with Ascent Pipeline routers that had the same problem. After
rebooting the routers the CRC errors would cease for days before starting up
again. It was so intermittent that I never did figure it out before the
This might help
http://www.cisco.com/warp/public/121/crc_tshooting.html
Keith
- Original Message -
From: [EMAIL PROTECTED] (Katson Yeung)
To:
Sent: Friday, April 27, 2001 8:53 AM
Subject: ATM interface troubleshooting question. [7:2249]
Dear all,
My old 7507 is having a minor
I often wondered about listing the completed test towards the certification,
instead of
referencing the CCNP. Thank you, Adele
Brian M. Green wrote:
That seems like a valid question to me. Assuming that these certs are a
useful tool for recruiters and HR personnel to measure a candidates
We've had that issue going to certain sites. I do know that if you have a
static NAT in your PIX for the inside host that you will connect. Those
using dynamic translations won't.
-Original Message-
From: Ken Yeo [mailto:[EMAIL PROTECTED]]
Sent: Friday, April 27, 2001 1:11 PM
To:
Showing the exam shows the areas of knowledge.
eg.: having Routing 2.0 - but not Switching 2.0 - might favor you for a
routing postion rather than a switching position.
Feargal
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Adele Galus
Sent: Friday,
PPP multilink would also be required...
Cheers,
-Michael Cohen
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Tom
Sent: Friday, April 27, 2001 3:58 PM
To: [EMAIL PROTECTED]
Subject: Re: 2 phsical ISDN lines to act as one = 256k [7:2232]
Put both
But as I know, you should have a cisco router acted as frame-relay switch
between
them. It seems a router can not acted as DTE and DCE at the same time. Am I
correct?
Curtis Call wrote:
On the DCE end:
globably define:
frame-relay switching
on the interface define:
encapsulation
Could be that you have a routing problem to the network hosting that site.
May not be PIX related at all. What does a traceroute tell you?
- Original Message -
From: Ken Yeo
To:
Sent: Friday, April 27, 2001 2:11 PM
Subject: PIX: Cannot browse Some Website: Try this: www.sitemeter.com
1 - 100 of 126 matches
Mail list logo