I support allot of customers with dedicated t1's and using isdn dialup
backup. I have had some customers that want to test the dialup backup
without taking the serial link down. I have noticed that on version 12.0 of
the IOS you can take the dial backup command off the interface and ping the
other
:25 PM
To: 'Elijah Savage'; Cisco (E-mail)
Subject: RE: ISDN Dialup Backup
Address your BRI seperatly, add static routes to the networks through the
BRI, and then ping. Once you know you have connectivity and they are
dialing, you should be able to change the addressing and add
They have a Winblows version available alos but it sucks.
-Original Message-
From: Pierre-Alex [mailto:[EMAIL PROTECTED]]
Sent: Monday, February 05, 2001 10:10 PM
To: [EMAIL PROTECTED]
Cc: Kevin Welch; Tony van Ree; ElephantChild
Subject: Simulation: ---Unix!
Hi All,
I found the answer
All,
I have 2 guys at work that have passed the ccie written and are going to
take the practical at the end of this month. I have 3 2500 series at home 2
2501 and a 2503 along with a cisco 804. I have a chance to buy 3 more 2500
at a very very good price, Our job is replacing them with 2600. But
Dave,
Have you used these router sims before. How are these sims compared to the
actual routers themselve.
-Original Message-
From: Dave W. [mailto:[EMAIL PROTECTED]]
Sent: Saturday, February 24, 2001 9:26 AM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: RE: Simulation for CCNP/CC
SSBrbm93IGl0cyBvZmYgdG9waWMsIGJ1dCBJIGhhdGUgc3VjaCBuYXJyb3cgbWluZGVkIGNvbW1l
bnRzLi4uDQo+IElmIHlvdSBoYXZlIGV2ZXIgaW5zdGFsbGVkIGFueSAqaXggc3lzdGVtLCB5b3Un
ZCBiZSBkYXJuIHdlbGwNCj4gYXdhcmUgdGhhdCB0aGUgdGhpbmcgaXMgICAgdyAgaSAgZCAgZSAg
IG9wZW4uICBUaGVyZSBpcyBhbG1vc3QNCj4gbm8gc2VjdXJpdHkgdGhlcmUuICBJdCB
I know its off topic, but I hate such narrow minded comments...
> If you have ever installed any *ix system, you'd be darn well
> aware that the thing is w i d e open. There is almost
> no security there. It has to be added and maintained. Win32
> systems are similar. Very trusting and friendl
SSBjYW4ndCBiZWxpZXZlIHlvdSBtYWtlIGZ1biBvZiBteSBnaWJlcmlzaCBuYXRpdmUgbGFuZ3Vh
Z2UuIGxvbCA6KQ0KDQoJLS0tLS1PcmlnaW5hbCBNZXNzYWdlLS0tLS0gDQoJRnJvbTogQWxsZW4g
TWF5IA0KCVNlbnQ6IFRodSAzLzIyLzIwMDEgMTE6NDUgQU0gDQoJVG86IEVsaWphaCBTYXZhZ2U7
IGNpc2NvQGdyb3Vwc3R1ZHkuY29tIA0KCUNjOiANCglTdWJqZWN0OiBSZTogQW55b25
Yes I think you are in the wrong place, but because you asked I will give
you my two cents worth. Software firewalls are getting better and better all
the time. And being a customer of dsl or cable you need something. But I
still do not feel comfortable with a software firewall. Yes I can always s
What is a good price for a 1605 used? Is it worth adding one to a lab?
-Original Message-
From: Devon Watkins [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 01, 2001 4:25 PM
To: [EMAIL PROTECTED]
Subject: Re: NAT on 1605 with DHCP on Ethernet0
If I understand you correctly, you are wa
First of all I am not PIX firewall guru. But I have done my fare share with
nat with frame relay links and isdn. So this should pertain to the PIX also.
But basically what you would have to do is tell the NAT device be it a pix
or a router to forward all port 53 traffic to the private ip address o
ip nat inside source static tcp 10.0.0.2 20 192.168.251.14 20 extendable
ip nat inside source static tcp 10.0.0.2 20 192.168.251.14 20 extendable
Bascially what you are doing is telling the router to foward all traffic
that comes in on port 21&20 on the outside address of 192.168.251.14 forward
t
Sorry my last clip should have looked like this
ip nat inside source static tcp 10.0.0.2 21 192.168.251.14 21 extendable
ip nat inside source static tcp 10.0.0.2 20 192.168.251.14 20 extendable
-Original Message-
From: Javier Castillo Alcibar [mailto:[EMAIL PROTECTED]]
Sent: Friday, Janu
Intel pro nics are good. But I prefer the adaptec nics. Not only does it do
failover but it does port aggregation. Where you could have their 4 port nic
card all with one ip address and the card doing load balancing to the
server. We use all of these on our database and web servers at work. We use
I hope someone can explain this because I am a lost here. I have the CIT
r Support book from the CIT support class put on by Cisco. Basically it
has like a bunch of slides in the book for you to follow along in class
and take notes from the instructor. Well we came across one slide that I
did not
No it is not proprietary. I put 16 meg chips 72 pin parity in my 2500's
4 to be exact and they all work like a charm.
-Original Message-
From: Jeremiah Wegernoski [mailto:[EMAIL PROTECTED]]
Sent: Friday, April 06, 2001 4:04 PM
To: [EMAIL PROTECTED]
Subject: Cisco 2500 Series RAM
I have
All,
I purchased a 1605 from eBay for my home lab. I decided to play with it
a bit on my DSL circuit. I am using NAT on this router, and everything
works fine except that now I can't vpn from the inside. Example, trying
to establish a vpn connection from a client on my local network in to
our vp
T'd. One of the reasons why
this
> doesn't work is that packet authentication will fail when the packet
is
> NAT'd - the calculated hash will not match after NAT has been applied.
>
> Charles
>
> -Original Message-
> From: Elijah Savage
> To: [EMAIL P
with one IP.
i.e.
ISP - ISP router Ethernet (216.142.0.1 255.255.255.252) - (216.142.0.2
255.255.255.252) Router - Internal network.
-Original Message-
From: Elijah Savage [mailto:[EMAIL PROTECTED]]
Sent: Thursday, April 12, 2001 9:47 AM
To: [EMAIL PROTECTED]
Subject: RE: Passing IPSEC
This is a wide open question. We would probably provide a better answer
if we knew what you were trying to host DNS for (a company or just home
use). For a starting point I would like to point you to the oreilly
Bind&Dns book 3rd edition, this is the most complete reference to DNS I
have seen. But
Here is a working configuration right here to host a webserver on dsl
link and how to do static nat overload. Allow multiple private ip
addresses on the inside to net to one ip address on the outside.
Using 2949 out of 7506 bytes
!
version 12.0
no service pad
service timestamps debug uptime
serv
I have never seen anything in reference to ip route-cache and traffic
shaping. But I do know that traffic shaping disables any type of queuing
on the interface. Maybe you have this confused with queuing. If so then
I have tons of documents on queuing and traffic shaping I could point
you to. If yo
All,
This is a little off topic, but I need help quick. I have been using
Netviz for a long time and really become to like it and proficient in
it. But now my job is requiring us to convert all of our Netviz docs to
Visio. I do not know to much about Visio at all so I was looking around
amazon fo
Great Job congrats
www.digitalrage.org latest in Techinical News and HowTo's
www.digitalrage.org/phpBB Discussion Forums
-Original Message-
From: McCallum, Robert [mailto:[EMAIL PROTECTED]]
Sent: Saturday, February 09, 2002 5:34 AM
To: [EMAIL PROTECTED]
Subject: Well Well Well CCIE #875
I have heard the guys that started Foundry left Cisco, how true that is
I do not know. But I am so surprised that nothing has come of a lawsuit
because the CLI and almost all commands are like Cisco's from what I
have seen of them. I do know one thing about them they are very sturdy
in heat. In th
Has anyone ever setup OpenBSD to talk with a cisco 3030 vpn concentrator
or even know if it is possible to make my openbsd firewall act as a
client to this concentrator for other machines on my network.
www.digitalrage.org latest in Technical News and HowTo's
www.digitalrage.org/phpBB Discussion
All read this below. Where have I been I did not know Cisco was coming
out with new test, they just changed what will the new changes be? And
how are they handling those already certified as a ccnp?
Limited Time Offer - Two Weeks Only
Be the First to Take the New CCNP Beta Exams - at a Discount
All,
I have put in a Cisco concentrator 3030 and flashed it to 3.5.1 and have
all my clients are using 3.5.1. I am authenticating my clients from a
Steel Belted Radius box (www.funk.com ) they are
also getting all of their configuration from this radius server also,
things like ip address, dns e
>From my knowledge if you use this command (spanning-tree portfast) on a
switch port it actually disable spanning tree for that port you should
only do this if pc's are connected. So if you enable portfast you
disable spanning tree for that port, if you disable portfast you enable
spanning tree fo
What I would do to start off is by putting a sniffer on the network. Now
this is not as simple as it sounds because you will have to port monitor the
switch ports to see what is going on.
- Original Message -
From: "Daniel Wilson"
To:
Sent: Tuesday, August 07, 2001 2:27 PM
Subject: Re: n
What does the static nat on the router look like? On a router without the
PIX being there it would be
ip nat inside source static tcp "ip of server on the inside" 25 "outside ip
address of the router" 25 extendable
- Original Message -
From: "Kevin McIntyre"
To:
Sent: Tuesday, August 07,
Why not use a 1605 which has 2 ethernet interfaces works great?
Brian wrote:
>It seems to me that a leading candidate for the above is a netopia r7200.
>Anyone have experience with a Cisco product to solve the above hardware
>need?
>
>Brian "Sonic" Whalen
>Success = Preparation + Opportunity
Dayton Ohio
-Original Message-
From: GAHellinger [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, November 20, 2001 8:16 PM
To: [EMAIL PROTECTED]
Subject: Re: Ohio [7:26942]
Hi James,
Delaware, OH checking in!
--
George A. Hellinger
wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]
Depends on how much experience she already has but if anything sounds to
good to be true well you know the rest. But I know someone that did CCNA
CCNP CCDA all in 6 weeks but he had 15 years experience and went on to
do his ccie also. He was doing this stuff when Cisco came about in 1984.
-Or
Does anyone have any comments on this book not many reviews on Amazon. A
guy at work said this thing was so full of mistakes that he got so angry
and took it out to the gun range and filled it full of 44magnum holes
and has it displayed on his desk now, I just can't take his word for it
and the fe
Priscilla,
Once again you are right on track. I ran into this situation or one like
it not long ago. I was not getting any tcp errors but mail was extremely
slow. The one difference here is my firewall was a OpenBSD firewall.
After putting a sniffer on the line I saw authentication trying to be
u
I also prefer OpenBSD on a cheap pc I am actually using it on a p166
with 80 meg of mem. It is great and serve's all my needs including
Intrusion Detection using snort. I make snort log to a MySQL database on
a totally different machine. I have written a howto that will walk you
step by step throu
According to TAC no. And from my experience with it no. I just worked on
this last month and had all types of problems with ACS on Solaris 8. You
are aware that this platform is not supported anymore by Cisco? I had so
many errors and problems I opened a ticket with TAC and they told me
that was a
I am not sure what you are trying to accomplish here. But I also use
unix and Cisco ACS for access controll and accounting to our network
equipment and only individuals in our department have logins, whay would
you want to give your entire NT domain access to your network equipment
or am I missing
Web Browser is slow but clustering is great for management one ip per
cluster. But be well aware that when using with HP Openview it cause all
kinds of problems. We are trying to work through our problems now to
have Openview discover them properly.
, ,
/(
That is whay we did it and the exact same way we have ours setup. But I
do not know about the cool stuff for snmp, because HP Openview just dies
when trying to discover the cluster, I do not know if it is something we
are doing wrong on Openview or what.
, ,
/(
All,
I had to setup a 2621 to do load balancing over 2 t1's with ospf. I know
ospf does this on a basic simple default setup. So after setting this up
everything seemed to be working great but one link was definately being
used about 80% more than the other. So after doing some reasearch on cco
I
O O ) |
`-^--'`From: "Elijah Savage"
>Reply-To: "Elijah Savage"
>To: [EMAIL PROTECTED]
>Subject: 2 T1 load balancing not working [7:32239]
>Date: Wed, 16 Jan 2002 20:42:57 -0500
>
>All,
>
>I had to setup a 2621 to do load balancing over 2 t1's
I have a 7500, and in the log files it is showing %RSP badcache flow flush
overrun detected. I have searche Cisco's website and I have also looked
through the errors log manual and I can't find a single thing. This has not
affected the router in anyway can someone help me out here.
__
Why am I getting tons of email from [EMAIL PROTECTED] I have received
13 blank emails today with no content from this individual.
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupst
Are you sure this is the right ISBN. I called Barnes&Nobles today and they
have no such book not even to order. I even tried doing a search on
Amazon.com by isbn and got no luck their either. The lady at Barnes&Nobles
told me that the ISBN number is 1 digital to long.
-Original Message-
F
Can anyone tell me if they have used the new McGraw Hill book ISBN0072124830
to study for the CIT. And if the questions in the book are close to what is
on the exam because these questions seem a bit easy. I have taken the ACRC
and passed it and I also have 10 years of networking experience from o
My organization just went through evaluating Cisco IDS which we already
have 12 sensors, Dragon IDS kind of based on Snort, and rolling our own
version of snort. I came up with these 3 based on the different price
points and also because according to some of my research talking to
people at SANS co
I think your better of just setting up something like snort as and IDS,
I know you want it all integrated. The IDS on the pix though not totally
worthless I have not found much use for it and with only 59 signatures
well it is sort of half baked in my opinion.
-Original Message-
From: Thom
All,
Last night I had to shutdown a gig fiber trunk between 2 5500's to run
on a 100M trunk we setup as a backup. The FCS errors are only showing up
on one side the fiber between the 2 cats were replaced but the errors
are still showing up. Which side would you all say you would replace the
fibe
There is no fiber running through a ceiling. They are sitting right next
to each other in the cabinets so a real short 3 meter fiber jumper is
being used.
-Original Message-
From: Larry Letterman [mailto:[EMAIL PROTECTED]
Sent: Friday, February 28, 2003 1:09 PM
To: Elijah Savage; [EMAIL
being
the culprit.)
Are there any media filters or other components in this link that could
be
causing a problem??
Priscilla
Elijah Savage wrote:
>
> There is no fiber running through a ceiling. They are sitting
> right next
> to each other in the cabinets so a real short 3
Google is your friend :)
But here is the site and everything you need is there on the site
http://people.ee.ethz.ch/~oetiker/webtools/mrtg/
Also here is what a sample looks like of mrtg running graphing my pix
and web server and mail server for my home network.
http://www.digitalrage.org/mrtg
Guy please put a sniffer on the link now. I experienced this and was
chasing my tail until putting a sniffer on the link and I had 2 pc's on
the LAN dropping a 5500 to it's knees. They were developers machines
which they reformatted and put no virus protection or anything on and
had the SQL slammer
If you have the 6000 series switches you can use the rspan command which
allows you to do port monitoring across your MAN.
-Original Message-
From: Martin J. [mailto:[EMAIL PROTECTED]
Sent: Tuesday, March 11, 2003 9:08 AM
To: [EMAIL PROTECTED]
Subject: Switch Monitoring via Trunk on Cat [
_tech_note
09186a00800a7af0.shtml#gen_tr_10_100
This link gives specific NIC cards and certain issues and also the Bug
ID's.
-Original Message-
From: Priscilla Oppenheimer [mailto:[EMAIL PROTECTED]
Sent: Tuesday, March 11, 2003 12:12 PM
To: [EMAIL PROTECTED]
Subject: RE: 10 half or 100 full [7
Another good utility is Swatch.
-Original Message-
From: Tariq [mailto:[EMAIL PROTECTED]
Sent: Wednesday, March 12, 2003 5:09 PM
To: [EMAIL PROTECTED]
Subject: Syslog server [7:65217]
I am looking for a good free ware PIX / CISCO syslog server. Any
recommendations???
Tariq
Message P
Any Linux or BSD box. I prefer OpenBSD for this task, then after
monitoring the logs manually for a few days and becoming familiar with
what is normal and what is not I setup fwlogwatch
http://cert.uni-stuttgart.de/projects/fwlogwatch/
And with this software you can tell it what to look for in the
Another good utility is Swatch.
-Original Message-
From: Tariq [mailto:[EMAIL PROTECTED]
Sent: Wednesday, March 12, 2003 5:09 PM
To: [EMAIL PROTECTED]
Subject: Syslog server [7:65217]
I am looking for a good free ware PIX / CISCO syslog server. Any
recommendations???
Tariq
Message P
Cisco buys Linksys.
http://www.quicken.com/investments/news/story/?story=NewsStory/BW/20030320/a5141_1048177983.var&p=CSCO
--
"BSD is for people who love Unix -
Linux is for people who hate Microsoft"
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=65834&t=65834
---
Poor sales bah humbug I can't believe that, I got the book and think it
is a great tool. Unfortunately I could not give an answer because I took
the exam before I had this book in my hands. I think if I would have had
the book before I went and took the exam that it definitely would have
made it a
Ok now this is strange. I have a new dell Laptop Model C840 with built in
ethernet controller. I got in 2 closet switches today(3550SMI) I needed to
configure. After getting everything configured through the console I
plugged my laptop into fa0/1 configured the port for speed 100 duplex
full.
Confi
I do not know which your having the problem with but I have used it with
a Cisco 3030 concentrator. If you think the router config is a issue I
can provide you with one I used with the concentrator. But I suspect it
is the pix giving you issues :)
-Original Message-
From: Greg Owens Jr [ma
This is possible because you are using win2k now and if that is the case
for AD stuff you need to open port 445 also.
-Original Message-
From: jmullins1 [mailto:[EMAIL PROTECTED]
Sent: Monday, June 02, 2003 4:52 PM
To: [EMAIL PROTECTED]
Subject: PIX access-list [7:70022]
I'm trying to al
All,
Long story short we have a point to point t1 back to corporate. While
using nbar on the router along with sniffers 90% of the traffic is web
based and things like sql transfers and legitimate business traffic is
timing out because of congestion basically the t1 is maxed out during
working ho
assistance, please do not hesitate to contact me
off-list.
Best regards,
Dom Stocqueler
Zoo Keeper - SysDom Technologies
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Elijah Savage
Sent: 12 June 2003 02:50
To: [EMAIL PROTECTED]
Subject: Traffic Shaping
Has anyone here experience with the CSS11000 series load balancers, for
redundnacy and fast failover configuration? If so I just would like to know
what you think about the product.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=41679&t=41679
-
As a way of finding out what my weak points are I have purchased the Boson
CCIE written prequal test #3. Some of the engineers that I work with have
been discussing the test. Some of them seem to think that boson is way to
easy.
I know this has probably been asked before but is the Boson a good te
No reason at all. But make sure you do the same on the switch also. My
preference is to hard code both devices to avoid duplex mismatches and
such.
> I have a 2620 fast ethernet dirrectly connected to 2912xl fast ethernet
> switch and right now it is set for :
> interface FastEthernet0/0
> ip ad
Seeing the other ip helper question made me think of what I was working on
in my lab. On Friday morning I get into work and there was a severity 1
ticket where about 800 employees could not log in. We discovered that one
of the dhcp servers was down but we have 2 so in theory all should have
been
ded only to the first IP listed in the configuration.
> If you want failover, you have to use the subnet, not the specific IP.
>
> Makes sense rationally speaking. The router only forwards packets, it
> does not verify if the destination host is alive or not.
>
> HTH
>
>
>
Frank you say it definately works, I wish it would have worked for me on
Friday :) But you are correct in saying it is for more than DHCP and BOOTP
by default there are 8 ports that are forwarded. I guess the only thing I
can do is put a sniffer in and see what is going on, but of course when
you
We have 2 3030 concentrators setup in a load balancing fashion and it
works very well. We have rolled this out to about 3000 users and have done
all types of testing with different applications and different types of
access. Over dialup we notice that there is about 12% overhead with the
cisco vpn
Not trying to be a jerk here but if you are making reference to the
circuits that are built on the css no they do not support secondary ip
addresses in my experience with them. You actually build the circuit then
apply that interface to the virtual circuits. I am not sure how you assign
a ip addre
DSL?
>
>
>
>
>
>
>
> "Elijah Savage"
> Sent by: [EMAIL PROTECTED]
> 06/04/2002 11:47 AM
> Please respond to "Elijah Savage"
>
>
>To: [EMAIL PROTECTED]
>cc:
>Subject:Re: VPN Overhead [7:45719]
>
>
> We
5 and said the performance was just
> so much better.
> That was for an office of only 50 people local to Tokyo.
>
> Thanks for your info. I will try to implement it in my designs.
>
> Theodore Stout, CISSP
> Senior Security Consultant
> CCNP, CCDP, CSS1, CCSE
&
oute. I still don't know why we have a 100m commection. I
> assume it is something with politics. When they told me our
> connection speed the first thing I though was Quake 3 and UnReal
> Tournament.
>
> Theo
>
>
>
>
>
>
>
> "Elijah
This is a little off base but, I am trying to run ospf on a vpn
concentrator through a checkpoint firewall has anyone ever gotten this to
work? I know with a PIX according to Cisco documentation and TAC you can't
run OSPF through it because of it's multicast. But the Checkpoint has a
object alread
This is a email I got from Cisco today about the new exams, I thought they
all would have the sims but that is not true according to this email.
Real-World Networking Expertise with Real-World Simulations
Cisco Systems certified professionals are recognized for their
networking prowess. Today, Ju
Has anyone taken this exam below
Wireless LAN Exam for SEs and FEs v2.0
If so can someone recommend some study material to me i can seem to find
any books or anything or is the Cisco recommended training the only way to
go?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4602
I am already ccnp and have another year before I expire but for personal
reason I took the new switching exam today. I passed it but I did not do
as well as I wanted and was suprised at the content of the exam, also they
have raised the bar of this exam it takes a 776 to pass or was that the
same
Set based command greatly out weighed the IOS commands when dealing with
multicast it is mainly going to be in set based format anyway because of
the hardware.
> How about ratio of set-based to ios-based commands. Thanks.
>
> On Fri, 14 Jun 2002 12:46:16 -0400 "Elijah Savage"
Has anyone ever used this site or docs to take the CCIE written or for
that matter used any of their doc for any test. I know alot of people
use Boson I was wondering the quality of material on this site.
www.networkstudyguides.com
Message Posted at:
http://www.groupstudy.com/form/read.php?
Hardware flaws hang some Cisco firewalls
Failures don't threaten security, but could cause network availability
headaches
Stephen Lawson, SAN FRANCISCO
Hardware flaws in some Cisco Systems firewalls for corporate central and
branch offices have caused the systems to hang or shut themselve
I was informed today by our Cisco rep that it is the exact same stuff
and more than enough to pass the pix exam, but he did state it was
missing a few of the higher end commands he is suppose to provide a list
to me and I will post them here and on my website
www.digitalrage.org
-Original Mes
Our 6509 just a last week came with 12.8(1)E and we were real skeptical
of it because it was early release but has been running fine but only in
a test environment for now. I will let you know if we decide to stick
with it. What was wierd is both msfc came with 2 different versions on
them and Cis
[ The following text is in the "iso-8859-1" character set. ]
[ Your display is set for the "US-ASCII" character set. ]
[ Some characters may be displayed incorrectly. ]
All here is the boot up message and a sh ver. Look at the bold and
underlined portion of this message why is that showi
[ The following text is in the "iso-8859-1" character set. ]
[ Your display is set for the "US-ASCII" character set. ]
[ Some characters may be displayed incorrectly. ]
All here is the boot up message and a sh ver. Look at the bold and
underlined portion of this message why is that showi
[ The following text is in the "iso-8859-1" character set. ]
[ Your display is set for the "US-ASCII" character set. ]
[ Some characters may be displayed incorrectly. ]
All here is the boot up message and a sh ver. Look at the bold and
underlined portion of this message why is that showi
> correctly
Here it is above I thought I put it in bold
-Original Message-
From: Circusnuts [mailto:[EMAIL PROTECTED]]
Sent: Sunday, November 11, 2001 9:24 AM
To: Elijah Savage; [EMAIL PROTECTED]
Subject: Re: Help Error on Boot up [7:25754]
I don't see the underline or b
sking. Looks fine. Can you elaborate on what the
problem is.
Gareth
""Elijah Savage"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> [ The following text is in the "iso-8859-1" character set. ]
> [ Your display is set for the "US
All I apologize for this but I do not know why my emails are getting
screwed up upon posting to the list hopefully this one comes out right.
System Bootstrap, Version 11.0(10c)XB2, PLATFORM SPECIFIC RELEASE
SOFTWARE
(fc1)
Copyright (c) 1986-1998 by cisco Systems
2500 processor with 16384 Kbytes o
Does anyone have visio stencils for Cisco 3500 series switches like the
3508's and 3548's, I use to have them but had to reinstall and now that I
have done that Cisco has seemed to remove these products from their site.
Here is where all the other stencils are and there is a 3500 series
stencil but
I have a set of 3030's in vrrp mode and all of a sudden these boxes have
started to reboot themselves. I have a TAC case open and we have flashed
the concentrators to 3 different versions but no difference still the
rebooting. Both boxes have been rma'd and the new boxes still continue
to do this.
Paul,
I do not know if you have found a collocation place already but here is
a very nice and reputable one at a price I think is very affordable. I
know a few people using this facility and the bandwidth is amazing. I
know someone using the 99$ package for a ftp server and you get 700gig a
month
I have actually been told by TAC before IP Input, for what it is worth
:)
-Original Message-
From: Priscilla Oppenheimer [mailto:[EMAIL PROTECTED]
Sent: Monday, September 08, 2003 6:09 PM
To: [EMAIL PROTECTED]
Subject: router CPU utilization on access lists? [7:75002]
Maybe a dumb questi
What kind of info are you looking for we are actually use mrtg to graph
how many users we have logged in to our 3030's that are load balanced.
-Original Message-
From: Curious [mailto:[EMAIL PROTECTED]]
Sent: Friday, February 07, 2003 5:46 PM
To: [EMAIL PROTECTED]
Subject: Site to Site V
Snort is very complicated for the average user and sysadmin, especially
with the mysql support and that is the only way I recommend running it.
But you should look at a product called Demarc the self install script
will install every piece of the ids you need snort, mysql, apache with
ssl simply ev
Has anyone ever got ezvpn to work, I have been banging my head on it for
more than a week now and and no luck, I have searched Cisco's website
and have followed this url exactly as stated
http://www.cisco.com/en/US/tech/tk648/tk367/technologies_configuration_e
xample09186a00800945cf.shtml
an no lu
09186a00800e9312.shtml#topic1
Following this url trying to get traceroute and ping permitted through
the pix. I only have one static ip address on the outside is this
possible because I have tried every possible scenario and not have any
luck. It also states on this page that microsoft icmp is per
1 - 100 of 190 matches
Mail list logo