HI all,
I recently implemented NAT on the company network to conserve valid IP
address's. I set it up so I have 5 static IP address's for our server
farm and that the other 10 address be used for what ever purpose.
Problem is, I have some net apps now that cant communicate from
workstations but
HI @groupstudy members
Got a question for you. I have just started at a startup network company
and they wish to have links to about 10 different locations (some of
them overseas). What we need is that these links come into a central
site (home office router) and we also have some sort of redun
having problems applying an access list to my dialer interface. After
creating my access list, I then apply it to the interface but it does
not seem to do anything. i am also runnign NAT on this same router, does
this make for any other problems that I should be aware of.
Thanks all
John B
[
like
to know the syntax for the dialer map command and if at all possible,
the benefits of it opposed to the dialer srting command.
Thanks @groupstudy members
John Brandis
Sydney Australia
[EMAIL PROTECTED]
_
FAQ, list archives, and subscription info: http
Hey all,
I have assigned my dialer int 0 an IP address (10.10.64.2/19) What I
want to know is if I can ping it when the physical int , in my case bri0
is not connected to another network thus no calls made ?
Thanks
John B
_
FAQ, list archives, and subsc
er to create load
balancing (if any )
Thanks in advance
John Brandis
Network Infrastructure Engineer
GoWireless Communications
Level 7, 155 George Street
Sydney, NSW Australia 2000
02-9251-5000
0418-613-976
[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
Also, do they come standard with A RSM module
Thanks once again
John Brandis
Network Infrastructure Engineer
GoWireless Communications
Level 7, 155 George Street
Sydney, NSW Australia 2000
02-9251-5000
0418-613-976
[EMAIL PROTECTED] <mailto:[EMAIL PROTEC
ng an easy day/night.
John Brandis
Network Infrastructure Engineer
GoWireless Communications
Level 7, 155 George Street
Sydney, NSW Australia 2000
02-9251-5000
0418-613-976
[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
_
FAQ, list archives, and subscr
G'Day all
I would like to know (if possible) the command for setting the
encapsulation type on my E0.1 interface to ISL or something like that so
I can start messing around with my VLAN config. I am running IOS 12 on a
1603 series router (not sure if the commands are valid on this series of
route
no ip classless
ip route 10.0.0.0 255.0.0.0 10.10.32.0
Thanks
John
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
no ip classless
ip route 10.0.0.0 255.0.0.0 10.10.32.0
Whats this mean
Thanks
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
g'day all.
My router crahs's on a regular basis every third Wednesday at around 11am
with
the following statementsegv exception. Can some one please tell
me what this means.
Thanks
John Brandis
Network Engineer
GoWireless Communications
155 George Street Sydney
+61 2
have collisons but for a 11 user network that is centerd around a
WIN2k
Server/Exchange server I have about a 40% collision rate.
Does any one have any idea's (besides the obvious of buying a switch) on how
I
can troubleshoot this or fix the problem...
Thanks gang
John Brandis
Network
G'day
Any one have any equipt for sale ?
Mates rates of course
Thanks
John
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1059&t=1059
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.htm
other question, is it possible to remove the files in flash one by one
??
John Brandis
Network Engineer
GoWireless Communications
155 George Street Sydney
+61 2 9251 5000
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15
release an IOS that corrects
the problem. I have a new IOS though which is in use as an Interim solution
and it appears to be working fine.
Thanks for your time
John Brandis
Network Engineer
GoWireless Communications
155 George Street Sydney
+61 2 9251 5000
Message Posted at:
http
connection to our ISP and should it fail, it make the connection ?
Thanks for reading this long letter
johnnyB
John Brandis
Network Engineer
GoWireless Communications
155 George Street Sydney
+61 2 9251 5000
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&
G'day all
I am here at work with nothing to do. I have a 1603 router spare in front of
me, and a 1605 (with no power suply). Can anyone give me some idea's so I can
either practice configs, or creating sub-interfaces ?I am a bit bored
John Brandis
Network Engineer
GoWireless Comm
G'day All
My company has gone broke and I need a job now. Can any one in Sydney help me
If you can, please call me.
John Brandis
Network Engineer
GoWireless Communications
155 George Street Sydney
+61 2 9251 5000
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=24
unsubscribe
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2698&t=2698
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
I was hacked by , Sysadmcn
He got in and changed the web site to F- USA Govt.
Does any one know what other changes to NT2000, besides renaming of the
default web page, to one that he added. Also, does any one know how he got
in ?
- Original Message -
From: "Kevin O'Gilvie"
T
Hey all, I am back on for the day,
Have a 2503 router with suspected 4MB flash. I need to upgrade from IOS 10.2
to at least 11.3. Problem is that IOS 11.3 is 5MB.
What can I do besides upgrade the flash.??
John Brandis
Network Engineer
GoWireless Communications
155 George Street Sydney
HI gang, In a new company now, a software company !! Any way, we are
telehousing a network in Intels racks here in Sydney. Intel have stated that
they will provide a layer 2-3 switch, which will encompass all our load
balancing needs for the application servers here. HOWEVER, the boss has
stre
G'Day all for the second time today.
2 questions:
Question 1: I have a 4MB HDSL link coming into my 2503 serial 0 port. Can I
check the bandwidth to make sure that this is what I really have in terms of
BW...
Question 2: Have configured the router to connect to the HDSL network and the
ether
Sorry for this crap,,,
Has anybody removed Programs from the Start menu in doze 2k via either the
Reg or GPE ?
I can do it myself by removing the folders in the profiles directory, but is
there another way..
To even things out, Here is a cisco FIX I come across
A bug in IOS 12.x.x,,th
Hi All
Working for a new company here in Sydney that believe Windows is the Be All
End All of the computing world.
However, we do run a Wide Area Network that connects 2 sites, have 2 cisco
2900 XL switch's and a foundry ServerIron firewall. All this connects clients
that wish to access our apps
hi all
Trying to configure for my test setup, an E0.1 interface on my 1603
router. I create the int no problem, however when I try to give it an IP
address it tells me that on interfaces intended for ISL or 802.10 can be
configured on this interface.
My question is, can I setup mutliple sub inte
HI All,
Quick ADSL question. Does any body have a hack or a suggestion of how to get
PPOE working on a WIN2k server on TELSTRA ADSL ???/
How does this add to the cisco learning channel that is groupstudy.com , well
it doesn't sorry but there has been so much crap lately I thought my quet
Hi All,
SOme one else come across the problem of getting a 5MB IOS, on to a
4.4MB 2503 cisco pro flash ?
I am in need of an IOS upgrade and I am short by about .5 MB of flash.
This is a stand alon router in a small office so getting the flash from
TFTP server is out of the question.
Any one
Question 1:I recently acquired 2 routers. 1x 1603 bri & 1 x 1720 2
bri 1 fast ether . As both are isdn cards for the WIC's, how can I
simulate an ISDN connection between
between the 2 routers, without spending money on an
expensive ISDN simulator ???
Question 2:
Hi All,
I thought I was on top of access lists, until today. When ever I apply
this particualr access list in IOS 11.2 , nothing on the network can
view internet pages. They can ping no problem but nothing else. Please
advise if you can, on which line the error is.
Thanks all, I appreciate it.
E
I am trying to start a similiar thing here in Sydney Australia. However,
its not really aimed at dis advantaged people, but they are more than
welcome. Only problem is there is no one to lead us.
So far there are 4 people in the group, we have 2 routers (both ISDN)
and one switch. If any one in A
G'day all,
Was part of the group a year ago, just returned from a year off. How do I
get back on the list.(CCNP level)
John Brandis
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=38891&t=38891
-
> HI All
>
> I was doing some study last night and I tried to implement OSPF as my
> routing protocol. I have 2 routers on the same ethernet LAN (with
> configs for a wide area network) and I was trying to get the routers
> to use OSPF to update and distribute the respective routers route
> tabl
Sorry
1603
int bri010.10.30.1
int e010.10.10.1
1720
int bri010.10.20.1
int e0 10.10.10.2
Was trying to figure out why the routes were not distributed via
OSPF
Thanks for any comments and once again, sorry for the earlier picture.
John Brandis
Sydney Australia
G'day
I am looking to swap some hardware so I can get on with my studies.
I have
1 x 1603
1 x 1720 2 bri 1 fa
I am looking for some 2500 series and a switch. Whatever is out there...
Thanks mates
JOhn
Sydney Australia
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1257
G'day
I am looking to swap some hardware so I can get on with my studies.
I have
1 x 1603
1 x 1720 2 bri 1 fa
I am looking for some 2500 series and a switch. Whatever is out there...
Thanks mates
JOhn
Sydney Australia
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12576
Hi ya,
another ACL question
I have a pretty simple ACL at the moment
ip access list 110
permit tcp any host 203.111.xxx.215 eq 25
permit tcp any host 203.111.xxx.215 eq 80
permit tcp any host 203.111.xxx.215 eq 25
permit tcp any host 203.111.xxx.215 eq 53
permit udp any host 203.111.xxx.215 eq
Hi all.
You may have noticed me on the air every now and then, before from GoWireless
and now from Touchmark. Well it seems that every company I work for go's
broke. GoWireless did, now touchmark have gone brokeWhen will it end for
all of us.
Advice for you youngsters, work where you are happy
Hi ,
Can any one help me find a switch that does
Server Load Balancing
12 - 16 100MB Ports
Thanks all
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16102&t=16102
--
FAQ, list archives, and subscription inf
Just purchased a pix 515, however the muppet how sold it to me cant remember
the enable password. Can any one remember the steps to recover ???
Thanks all.
**
visit http://www.solution6.com
UK Customers - http://www.solut
I use OSPF quite a lot, and I have followed John/Chuck/Pricilla/Larry L
. and a few others and re-done my configs and moved the actual
interfaces into the ospf statements. I had problems the other way (maybe
because sometimes I rush through my configs and wonder why they don't work
the next day
Hi All,
Have a 4006 in place here using Version 12.1(12c)EW as my core switch.
Yesterday had fun with Slammer, and last night also. I wanted to use the
SPAN so I could mirror the data from one port to my snort box so I could
verify to the sys-admins that it was slammer (they said it would never
h
While we are speaking of books, I went to the bookshop just then and had a
look at Pricilla's book. Don't know what you pay in the US for a book,
however it was "on sale" for $140AUD...
That's to much for me, however it looked like a good book.
*
003 3:02 PM
To: [EMAIL PROTECTED]
Subject: Re: Top Down Book [7:62934]
""John Brandis"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> While we are speaking of books, I went to the bookshop just then and had a
> look at Pricilla's book.
Hi All,
Any one got a pix config that they can email me
(of course, delete your IP address's etc)
Thanks all
John
**
visit http://www.solution6.com
UK Customers - http://www.solution6.co.uk
**
I would check your settings such as the LMI type, Have you done any other
fault finding yet ? Such as sh frame relay pvc ?
Once you hit no shutdown, the interface becomes live in a way of speaking.
Here is an example of one of my configs.
interface Serial0/0
no ip address
encapsulation frame-re
Hi,
Any one else noticed that on the 2950, and I guessing other catalyst low end
switch's, that one cant define the encapsulation of the trunk link. Yes it
will auto negotiate, however I feel that control has been pulled away from
me. I also dont like on the 4006, that you can only define this sa
Hi All,
Tommorrow I will be adding a new 2950 to my switch fabric. I will add
another GBIC copper module to my 4006. Does any one know if I can just
insert it whilst on ? I remember last time I done this under the old IOS for
the 4006 with the supIII, it had a cow and just died. I have the latest
Cat 4006 is IOS based from my experience
Cat4006> en
Blah blah
Cat4006# conf t
then try the hostname eaglesfan
Should work
-Original Message-
From: Eagles Fan [mailto:[EMAIL PROTECTED]
Sent: Friday, 28 February 2003 7:51 AM
To: [EMAIL PROTECTED]
Subject: Re: Cat4006 - Prompt [7:63984]
surfing, email and the like ? I am guessing the PC based checkpoint model
would win that race, but has any one here becnhmarked it ???
Thanks
Jb
-Original Message-
From: MADMAN [mailto:[EMAIL PROTECTED]
Sent: Friday, 28 February 2003 11:25 AM
To: John Brandis
Cc: [EMAIL PROTECTED]
Subject
Hi All, I am sure one of you will see the problem and be able to offer a
solution.
I have 2 organisations here, one in Australia the other in NZ. In Australia,
we have a hub and spoke point to multi-point config from the hubs
perspective. I run OSPF and have all sites in area 0 (yes I know i shou
Another problem
Sys admins here have noticed that when trying to ping some of the switch's,
some of the packets simply die in transit. Other people have said that the
speed of file transfers here is getting poor.
We have a simple network here, 3 levels, each having 4x 2950's, connect via
Gigabit
crypt
traffic for the network the ping came from so it never gets back.
Sounds good to me...
Symon
-Original Message-
From: John Brandis [mailto:[EMAIL PROTECTED]
Sent: 04 March 2003 01:55
To: [EMAIL PROTECTED]
Subject: Bizzare Routing/VPN Issue [7:64301]
Hi All, I am sure one of you wil
Any one have any really complex pix configs thy wish to share ???
Why do I want them, well I have a client with checkpoint firewall, that is
struggling at the moment. The config/rule sets, have over 70 rules (in
checkpoint terms that is completely un-managable)
Thus, it looks like this pix conf
I love the book, which is why I photo-copied it twice...
Just joking. Good book, but it still costs to much. I wonder if the author
would just send me a copy out of the goodness of her heart. I also wonder
what Santa Clause did with my sports car that I requested last year...
-Original Messag
I rolled back the client...
-Original Message-
From: Brian [mailto:[EMAIL PROTECTED]
Sent: Wednesday, 12 March 2003 3:56 AM
To: [EMAIL PROTECTED]
Subject: RE: Problem with Cicso VPN Client 3.6.3.B-k9 connectin [7:65038]
David,
I encountered a similar problem.. The VPN client I was
Hi,
Does the 3640 have a card for gig ethernet ?
**
visit http://www.solution6.com
UK Customers - http://www.solution6.co.uk
**
The Solution 6 Head Office
Hey All,
I am going through my network, which consists of a single 4006 at the core,
and some 14 2950's connected via gig fibre.
Picture this, I have 4 2950's on each floor (3 floors in my building, yes I
know that does not equal 14 switch's) each have a gbic fibre connection to
the 4006 core,
Hi All,
once again, I am back designing a network for my company (scary).
The budget I have been given from my manager, would not pay for a family
visit to McDonalds.
However, this is the requirment (my product selection is below)
* Provide up to 200 ports on the floor
* 2 level building, w
All,
I all wish you the best of luck, and I hope that you and your families will
be safe. I have no doubt that we will have to deal with troublesome
situations, of which I hope none of you get caught up in.
Best Wishs and hope you are all OK through this.
John
Hi All,
once again, I am back designing a network for my company (scary).
The budget I have been given from my manager, would not pay for a family
visit to McDonalds.
However, this is the requirment (my product selection is below)
* Provide up to 200 ports on the floor
* 2 level building, w
Lately, I have seen the odd problem on the list, such as my email being
redistributed some week or so after I sent it. Also, earlier this week, the
list was around 6 hours behind the time of sending. It looks much better now
though
*
I had the same model and the same problem in 2001. I was doing prettyt much
the same setup also, however I had PAT in use. For some reason (which was
reoslved with an IOS upgrade), the box would die but luckily I would get a
dump at that time of the memory etc. I got onto the TAC and they had a new
I had the same model and the same problem in 2001. I was doing prettyt much
the same setup also, however I had PAT in use. For some reason (which was
reoslved with an IOS upgrade), the box would die but luckily I would get a
dump at that time of the memory etc. I got onto the TAC and they had a new
hi All,
Please tell me if I am wrong and best practices
A trunk link, by default, is a member of all VLANS
Would it be best practice, to place your trunk ports in a particualr VLAN,
then define what you want pruned/not pruned ?
Reason I ask is that I am getting the hostflapping error every
Any one have an idea of how much one would cost these days ? Just cant
access my one from the console port, no other way of getting access to it.
If I connected a modem to the port, I would need to configure the port,
however cant even get that far.
Thanks
John
Sydney, Australia
***
I would like to tell you about a problem I had in relation to this.
In November last year, I rolled out a new building for my current employer.
We are not a huge company, but it was around 600 ports using 100% Cisco
gear. The challenge was, that on thursday night, I took delivery of the
gear. Frid
Hi All (long one)
Have my WAN running OSPF using a third party for the virtual Frame cloud
(telstra tpips), have just merged with a company that runs BGP over there
WAN and also use a third party for the virtual frame/IP cloud (not Telstra
Tpips). There is a single site that both companies share,
**
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the [EMAIL PROTECTED]
This command is stated to discard all packets that specify the route path to
follow
WHAT DOES THAT MEAN
please email me back
Regards,
John Brandis
CCNA, MCP+I
Entellect Solutions
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20475&
Whats new ?
Got a problem here that may need to go to TAC, hoiwever I thought I would
see if you had any idea's first.
Took delivery of my 4006 last week. Put on the latest rom and IOS relases
for the particular model of the supIII
I need to create a trunk link on ports gigabit ethernet 2/1 - 2
Hi All,
Got this problem. Have a site at the moment, site a running the 172.17.x.x
networks. Management has just informed me that we have just acquired an
empty building down the road, site b. The idea is that we move all servers
and core infrastructure to site b over a series of weekends. Afte
Hi Jenny,
Is your carrier Telstra ?
Do you use Telstra TPIPS for your cloud/next hop router ?
John
Sydney, Australia
-Original Message-
From: Jenny McLeod [mailto:nobody@;groupstudy.com]
Sent: Wednesday, October 23, 2002 9:17 AM
To: [EMAIL PROTECTED]
Subject: Re: run VoIP on a frame ne
Damn phones,
Don't they make you feel stupid sometimes. Great work Larry.
jb
-Original Message-
From: Roberts, Larry [mailto:Larry.Roberts@;expanets.com]
Sent: Wednesday, October 23, 2002 10:57 AM
To: John Brandis
Subject: RE: 4006 IP Phone DHCP problem [7:56049]
The Fix was to
Hi All,
Would you believe it, I have some spare time. In saying that, my recent
delivery of my 4006 and 14 x 2950's, will be in my little comms room
avaliable for me to play with for around 2 weeks.
Would any one, have any labs in relation to switching, or even routing at
CCNP - lower end CCIE
Trying to work out what answer/statement is least wrong, is what I do all
day whilst listening to my tech support staff. Its amazing but you get what
you pay for.
Jb
-Original Message-
From: Jenny McLeod [mailto:nobody@;groupstudy.com]
Sent: Monday, October 28, 2002 3:42 PM
To: [EMAIL P
Any one know how to get the 3005 to initiate a connection, as opposed to let
it be the central site just accepting the session ?
jb
**
visit http://www.solution6.com
UK Customers - http://www.solution6.co.uk
**
Hi all,
in relation to the commecnts on the test, I have not seen a set based switch
for almost a year now, however I look at some of my SYNGRESS CCNP Switching
book, which makes a funny comment on how "ALL" core switchs are set based. I
would like to see the tests coming up in the future, as I f
**
visit http://www.solution6.com
UK Customers - http://www.solution6.co.uk
*
The Solution 6 Group is on the move. As of Monday 25 November, our Sydney HQ
will
Hi All
have a strange probelm with a new 3005 and hope that some one may be able to
help, possibly a hardware problem though.
I shutdown the sydney office in the early hours of saturday morning to get a
new UPS installed for the server room. I restarted the vpn 3005, and what do
you know, of all d
I had the similar type of problem, remote users (broadband) would lose
connectivity and get the remote peer not respondin, your ipsec session has
been termintated error. The problem that I had, was with the broadband ISP,
in this case Telstra. Telstra use a bpa hart beat packet, just so Telstra
kno
Hi All,
What commands are available on the 2950's to see instances of STP, or to
diagnose spanning tree problems ?
thanks
**
visit http://www.solution6.com
UK Customers - http://www.solution6.co.uk
**
?
Thanks all
John
Sydney, Australia
John Brandis
Network & Security Engineer
[EMAIL PROTECTED] Phone: +61 2 9278 0629 Helpdesk: +61 2 9278 0486
**
visit http://www.solution6
Hi All,
Not sure if this is correct, however is the pix 515 able to have more than 1
IPSEC tunnel out at any omne time ?
Reason for this is that I thought I saw a note that this box was not able to
do this, and that the 3005 performed this functionality.
Thanks all
John
Sydney, Australia
I noticed that on my 4006, I could only have isl enabled on the first 2 gige
ports. It took me 2 calls to tac to wor this out, by default all were
dot1q..
Hope this helps..
-Original Message-
From: Mark Johnson [mailto:[EMAIL PROTECTED]]
Sent: Monday, 23 December 2002 10:21 AM
To: [EMAIL
happy new year from Sydney Australia.
does any one have any samples questions for ccnp routing exam (current), got
my exam friday after a year of saying i will do it next month.
John Brandis
Network & Security Engineer
[EMAIL PROTECTED] P
Hi All,
I am doing this exam in 12 days. Could any one please pass on any info,
cheat sheats, sample questions in relation to this test. With tests costing
so much, cant afford to fail, literally.
Have fun all, I am off home for the day.
John
Sydney Australia
**
G'Day all
1). Have 2 routers at the moment connected back to back. can see each s0 int
on each router after the connection is up. For some reason, I cant seem to
start the ospf process across this link. The code "I think" is ok.
router a
interface Serial0
ip address 192.168.1.5 255.255.255.252
)
And on router a
Network 192.168.1.5 0.0.0.0 area 0 (which is int of the s0)
Why would not just listing them as the networks bound by the 30 bit mask not
work
Thanks for your time dude
John
Sydney Australia
Ps: sorry for the disclaimer size, its huge
-Original Message-
From: John Brandis
sure the interface is up. Does any one know of a
problem of OSPF across older IOS ?
Ps: when I try this on another router, such as 2 routers using IOS 11.3(9)
this works no problem)
John
-Original Message-
From: John Brandis [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, 7 January 2003 4:17
Hi All,
can you tell I am having fun with OSPF ??
Any way, I am playing with OSPF on different network types. I wish to see if
i have a full adjacency or if I have only acheieved a neigbor state on
certain types of networks. Where, can I find what state I am currently in,
and what router is the D
wp378895Hi All, can some one please explain this error ?
%C4K_EBM-4-HOSTFLAPPING: Host 00:10:0B:10:B9:20 in vlan 200 is flapping
between port gi2 and port gi1
wp378896Workaround: None. (CSCdy21031)
* wp378897When the spanning tree mode is PVST, isolated trunk ports
transmit BPDUs with the
**
visit http://www.solution6.com
visit http://www.eccountancy.com - everything for accountants.
UK Customers - http://www.solution6.co.uk
*
This email message
Any one been playing with TPIPS ?
**
visit http://www.solution6.com
visit http://www.eccountancy.com - everything for accountants.
UK Customers - http://www.solution6.co.uk
I have the following error whilst playing with OSPF
12:52:40: %OSPF-4-ERRRCV: Received invalid packet: mismatch area ID, from
backbone area must be virtual-link but not found from 10.1.4.20, Ethernet0
I have 2 routers, Router A and Router B, back to back. Able to get the 2
connected, however whe
Hi All, thanks for the replies. Yes my config was all over the shop.
Replaced it in both routers with the following (completely changed some
things)
Router B
interface Ethernet0
ip address 192.168.2.20 255.255.255.0
no ip directed-broadcast
!
interface Serial0
ip address 192.168.1.20 255.255.
G'Day all,
Studying for CCNP switching (early stages yet). My question is: (all in
theory)
At our core, I have a Cat 5509, configured as VTP Server for my-network. I
have 10 VLANS (192.168.x.0) for the various business units in my global
empire's Sydney office. From the core, I have 10 fibre conn
G'Day All,
Quick question on CCNP Switching topics. Have say around 10 VLAN's all
coming back to my CAT5k fastether net ports on say module 6. My Cat5k is the
Core of my network, and as such is the VTP domain server. Forgive for the
question if really stupid, however, do i need to configure for e
s wrong to me. What am I missing.
John Brandis
**
visit http://www.solution6.com
visit http://www.eccountancy.com - everything for accountants.
UK Customers - http://www.solut
1 - 100 of 151 matches
Mail list logo