Please ignore my last question concerning uploading/downloading pix image
via tftp.
I should hit my self over the head for asking for such 'intel'.
Thank you.
>Now, all the code acquisition process aside, if you are running an older
>version of PIX OS, then you have to tftp the PIX OS to a tft
Hi,
Unfortunately my version is 6.1.
>Now, all the code acquisition process aside, if you are running an older
>version of PIX OS, then you have to tftp the PIX OS to a tftp or http
>server, and then pull it back from the tftp/http server while in ROMMON
>mode. This basically is like you're insta
Hi,
Thanks to everyone who provided some 'intel',
however after doing a #show version I do get the serial number
and a Activation-Key displaying 4 sets of hexadecimal numbers, what is this
key used for?( its version 6.1(4))
Also the registration site at CCO
https://www.cisco.com/pcgi-bin/Software
The topology diagram given has at least 3 errors. I wasted a few hours
figuring this out.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=59547&t=59230
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/ci
The topology diagram given has at least 3 errors. I wasted a few hours
figuring this out.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=59546&t=59230
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/ci
Here's one I hope the PIX specialists on the List can help me solve.
I have a PIX 520 v6.2(1). I understand that it can act as a DHCP server, but
DHCP service on the PIX is currently supported only on the inside interface
and I need to service a subnet on another interface. I have a DHCP server
ru
What Terminal Emulator is used in the CCIE lab?
Can you have multiple sessions (screens) open?
Also, I assume it's a workstation with a keyboard, not a nasty laptop.
Any info?
Thanks
Paul
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5926
Can someone tell me the command to disable password recovery on a router, so
when someone reboots the router the cant password recover and it forces them
to reset the configuration,
As far as I can remember there is a command but I cant seem to find it,
Any help appreciated.
Kind regards.
Paul
dispay the
bootflash: VERSION etc etc etc when you do a show version
Catalyst is running CATOs 6.3.(5)
MSFC is running 12.1.2.E
Anyone else seen this
Thanks
-Paul
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57903&t=57903
--
Think i figured it out
The router will forward the subnet broadcast regardless of whether the no ip
directed-broadcast command is configured on the ingress/egress interface or
not - IF the destination subnet isn't locally attached to the router.
Guess the router just does a route lookup and forward
Check your anti-spam settings. Sometimes they filter us as we send
e-mails using "bulk" as the priority. If you are being filtered via
anti-spam, please tell me as I can sometimes correct.
Paul
-Original Message-
From: [EMAIL PROTECTED] [mailto:nobody@;groupstudy.com] On
eated so that, among other reasons, the CPU was capable of 256-bit
AES. This was addressed in some detail at the San Diego Networkers'
evening Product Session by Mike McAndrews, the Director of Product
Management for the Wireless Networking BU.
Cheers all.
Paul
> -Original Message
this, if anyone ever had
experience, any assistance would be greatly appreciated.
thanks,
Paul
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57062&t=57062
--
FAQ, list archives, and subscription info: http://www.groups
utual authentication").
=20
For those who would like more info on this, take a look at the
following:
http://www.cisco.com/warp/public/cc/pd/sqsw/sq/tech/acstl_wp.pdf
=20
Cheers.
=20
Paul
-Original Message-
From: mike greenberg [mailto:newbiecisco@;yahoo.com]=20
IP and broadcast key rotation)
are, by all the tests and hacks I've seen/read, very secure.
Good luck.
Paul Forbes
Network Engineer
Trimble
> -Original Message-
> From: mike greenberg [mailto:newbiecisco@;yahoo.com]
> Sent: Tuesday, November 05, 2002 11:21 AM
> To: [EMAIL
The new qualifications for CCIE have been announced. I have a copy of some
practice questions. They are as follows:
1. Describe the history of the papacy from its origin to the present day,
concentrating especially, but not exclusively, on its social, political,
economic, religious, and philosophi
you would like to send me
your name and email address I will put it on a list that will be sent
to Cisco.
Thank you,
Paul Beckman
MCSE MCT CCNA CCA
Delta Health Group
CIS Department
(850) 470-0155
[EMAIL PROTECTED]
-BEGIN PGP SIGNATURE-
Version: PGPfreeware 7.0.3 for non
block socks port 1080
-Original Message-
From: [EMAIL PROTECTED] [mailto:nobody@;groupstudy.com]On Behalf Of
Mr piyush shah
Sent: Thursday, October 31, 2002 6:58 AM
To: [EMAIL PROTECTED]
Subject: Re: Yahoo messanger traffic can be seen/blocked? [7:56571]
Hi all
I am network administrat
x27;t that correct?.
Now, how can we make that happen for E&M card? (VIC-2E&M)? "digit-strip" is
enabled by default, but next router only sees 333- instead of .
Help me out. Thank you.
-Paul
Message Posted at:
http://www.groupstudy.com/form/read.
ty
Anways ... I've got enough info from you all to start reading up ...
Thankx again ...
Kind regards
Paul
- Original Message -
From: "John Neiberger"
To:
Sent: Tuesday, October 29, 2002 3:50 PM
Subject: Re: Frame with ISDN Backup [7:56449]
> Hmm...I just
ad up and learn the rest ..
Thanks in advance
Paul
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=56449&t=56449
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report m
Yeah, thanks AMR ... what a great help you are !!!
- Original Message -
From: "AMR"
To:
Sent: Monday, October 28, 2002 12:02 PM
Subject: Re: Intermittant PIX error ... [7:56404]
> This description is vague at best.
>
> ""Paul"" wrote
) ... then all of a sudden the
telnet session works
I can't find much on the Cisco website
Does any have any ideas, or has anyone experienced this themselves ???
Regards
Paul
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5640
to distribute label information in the network. The only thing I can
recall at this moment is that they use different tcp port numbers but that
is about it.
I am not sure why turning on mpls ip would show the tag-switching ip in the
configuration.
- Paul
http://www.convergedigest.com/tutorials
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
6608 blade on a 6509...
Call manager Manages it.
Paul Beckman
MCSE MCT CCNA CCA
Delta Health Group
CIS Department
(850) 470-0155
[EMAIL PROTECTED]
- -Original Message-
From: Brad Ellis [mailto:bellis@;optsys.net]
Sent: Friday, October
I am lucky that I can tie down all our remote site Pix's, so that a PC
Anywhere session will only be allowed from a main site Pix Global IP address
. and remote users need to VPN in to use PC Anywhere ...
Regards
Paul ..
- Original Message -
From: "John Hutchison"
To
"CallManager") or by
technology (e.g. "EIGRP")?
If enough of us complain, perhaps they'll change it back.
I also think a SlashApp-like RSS feed from CCO would be pretty nice...
Cheers all.
Paul Forbes
Network Engineer
Trimble
+1.408.481.8291
> -Original Message-
&
display IE field. We have also
checked with two other carriers and they also deliver it in the
facility ID field.
My question is... does anyone get caller name ID on their phones
from external callers? And if so what carrier do you use and what
kind of switch is it being brought in on?
Paul Bec
Do you have access in the Lab to the Internetwork Design Guide section of
the Doc-CD see hyperlink below.
Any info appreciated.
Kind regards
Paul.
http://www.cisco.com/univercd/cc/td/doc/cisintwk/idg4/index.htm
Paul Casey
O2 Ireland
Core Network Eng'g Team
76 Lower Baggot Street, Dub
The location of the image should be defined on the hyperterminal.
Command "xmodem destination_file_name" tells router to listen to the request
from hyperterminal.
Paul
""jghkskgsjk ghsfghsdfhg"" wrote in message
news:200210190634.GAA22618@;groupstudy.com...
>
ack.
Any help appreciated
Kind regards.
Paul.
Paul Casey
O2 Ireland
Core Network Eng'g Team
76 Lower Baggot Street, Dublin 2.
> * Mob : +353 86 8143310
E-mail: [EMAIL PROTECTED]
PLEASE NOTE THAT THE ABOVE IS CONFIDENTIAL INFORMATION I
r's seat on its NDA policy, and it is
> not worth
> > risking losing so much just to tilt at windmills.
> >
> >
> > Tom Larus, CCIE #10,014
> >
> > ""Paul Jin"" wrote in message
> > news:200210171808.SAA07127@;groupstudy.com..
If you guys have any specific questions, you can write the CCIE team
at Cisco and they will provide you the answers. This way, you know for sure
it is not breaking the NDA.
- Paul
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=55824&
do now is to create a good study strategy and time allocation plan.
I would appreciate any experience you ever had during your studying, they
would be absolutely valuable for me.
Thanks in advance
Paul
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=55803&
il server !!!
I totally understand that the Pix was not designed to perform this way,
but I was wondering if anyone has configured a Pix in such a way ?? or if
anyone has any advice !!! apart from fix the broken firewall :) .
Kind regards
Paul ...
Message Posted at:
http://www.groupstudy
You may want to get a hold of the Bellcore GR 253
SONET generic standards doc or other SONET Bellcore GR
docs relating to switching times and the equivalent
SDH ITU-T standards (which I am not sure what it is).
On the SDH side you may want to start with ITU-T
G.783.
Hope this helps
pb
---
You may want to get a hold of the Bellcore GR 253
SONET generic standards doc or other SONET Bellcore GR
docs relating to switching times and the equivalent
SDH ITU-T standards (which I am not sure what it is).
On the SDH side you may want to start with ITU-T
G.783.
Hope this helps
pb
-
-byte ICMP Echos to 10.9.9.3, timeout is 2 seconds:
..U.U
Success rate is 0 percent (0/5)
We use static routes throughout ...
Any thoughts or ideas ...
Kind regards
Paul ...
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=55701&
Yes, it will take few days to a week or so before sylvan updates
Cisco about your score.
- Paul
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=55652&t=55651
--
FAQ, list archives, and subscription in
Thanks for your input guy's ...
I found a Switch in the DMZ that had an IP default-gateway, pointing to a
Novell box with an interface on both the Inside and DMZ LAN's ...
As soon as I changed the IP def-gateway I could telnet around the DMZ
switches and routers ..
Reg
).
How can I get round this ??? Am I missing something real basic here ???
I can't trash the PIX and start over as I have regular VPN, NAT and Global
traffic
Any input welcome ..
Kind regards ..
Paul ...
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5544
.3
server Z is on dsw 150 mac addr 000d ip address 172.16.151.50
dsw 143 mac addr 000b
dsw 150 mac addr 000c
Paul
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=55437&t=55437
--
FAQ, list archives, and subsc
ing I have NAT'de
before on a PIX but not with a router.
I have no idea why the second NAT on the PIX does not work ...
Any input would be greatly appreciated ..
Kind Regards
Paul ...
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5
The first CCIE number given was 1025.
Paul
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
[EMAIL PROTECTED]
Sent: Wednesday, October 09, 2002 1:41 PM
To: [EMAIL PROTECTED]
Subject: CCIE numbers [7:55201]
Greetings all,
I've a gentleman claimi
After checking my routers I found that the show version does differentiate
between the 1720 and 1721. Hope this helps.
Paul
""Daren Presbitero"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Group Studiers,
>
> Anyone know how to tell t
Sounds like you might want to check this seminar out.
I guess you can contact your local Cisco Sales team
to gain access info to the seminar.
- Paul
http://www.ciscopep.com/reglogin.lasso?event_id=PE9606457
---
Register now for the Cisco Catalyst 5000 Migration
Hi,
ip nat inside source static private public ip
./Msava
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Joe Middleton
Sent: Friday, October 04, 2002 3:23 AM
To: [EMAIL PROTECTED]
Subject: NAT [7:54838]
Hi All,
I am trying to set up NAT on a cisco
.
Local preference or AS-path attributes may NOT be modified.
I'm thinking to do this, to use policy routing, or is there another way to
deal with a situation like this.
Any help appreciated.
Kind regards.
Hello,
Is there a way to update your System rom: bootstrap version off another
router.
I think that mine is correct.
I have tftped the flash: from another router and that was fine,
Is it possibleto tftp the System rom bootstrap software.
Any help appreciated.
Kind regards.
Paul.
Paul
nd regards.
Paul.
> -Original Message-
> From: nrf [SMTP:[EMAIL PROTECTED]]
> Sent: 21 September 2002 20:29
> To: [EMAIL PROTECTED]
> Subject: Re: dumb question IPV6 [7:53712]
>
> >
> > For one, the economic benefit of being able to change ISPs
Yeah ... I was using a Dell CPx or CPt when this happenned to me ...
- Original Message -
From:
To:
Sent: Thursday, September 12, 2002 9:14 PM
Subject: Re: RE: 2924 reboots when I plug in a console cable [7:53135]
> Are you using a DELL laptop. There is know problem with the Dell
am still working on it so
expect occasional down-time.
Paul Borghese
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=53229&t=53229
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco
How do I apply two different crypto maps to the same interface ???
I have two crypto maps ... bmw and ferarri .
However, if I apply the bmw crypto map to the oustside interface this
removes the ferarri crypto map from the outside interface .. and vice versa
...
Regards
Paul
Hi,
You need to create an ACL to include the dial pool, then permit it to access
the server.
Thanks,
Msava
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Parameswaran S
Sent: Thursday, September 12, 2002 9:03 AM
To: [EMAIL PROTECTED]
Subject: Access-l
Thanks people for your replies.
atm clock internal got rid of the link flaps.. ah..new stuff.
Thanks!
-Paul
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=53147&t=53134
--
FAQ, list archives, and subscription in
Yeah .. same thing happened to me .. about a year ago in my previous job ...
I had Win 2000 too. I plugged the console cable in .. then as i was talking
to a colleague i realised that that the 2924 had rebooted I only ever
accesssed the 2924 once more with a console cable, after the second t
alive
!
interface ATM1/0.200 point-to-point
ip address 2.2.2.1 255.255.255.0
pvc 200/200
protocol ip 2.2.2.2 broadcast
!
Does anyone have any idea if I am missing in the configuration? Anybody
have any experience in OC3 MM link flapping?Please help. Thanks in
advance. -Paul
Below is output dump
P key address' line ???
I guess that I would have to create another 'crypto ipsec transform-set' !!
Has anyone done anything similiar to this
Regards
Paul ...
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=53082&t=53082
--
ialin to it and force it to call me back.
Any help appreciated.
Kind regards.
Paul.
--
Sent from my BlackBerry Wireless Handheld
This E-mail is from O2. The E-mail and any files
transm
sure you can ping you own serial
interface..
Can some tell me what I am doing wrong. I must be leaving something out
here..
Kind regards.
Paul.
--
Sent from my BlackBerry Wireless Han
Paul.
--
Sent from my BlackBerry Wireless Handheld
This E-mail is from O2. The E-mail and any files
transmitted with it are confidential and may also be privileged and intended
going to need that
source-interface.
Cheers all.
Paul Forbes
Network Engineer
Trimble
> -Original Message-
> From: mindiani mindiani [mailto:[EMAIL PROTECTED]]
> Sent: Friday, September 06, 2002 2:20 PM
> To: [EMAIL PROTECTED]
> Subject: How to manage the pix 501 remotely
I have looked on the cisco website and also books that I have ... But I
cannot find any documentation anywhere If I can't use the AUI port as
another ethernet port .. then what is the purpose of this interface
Regards
Paul ...
Message Posted at:
http://www.groupstudy.com/form
and I want to use GRE..
Any help appreciated
Kind regards
Paul.
--
Sent from my BlackBerry Wireless Handheld
This E-mail is from O2. The E-mail and any files
transmitted with i
nd on the other router for certain traffic to go through this
one
Kind regards.
Paul.
--
Sent from my BlackBerry Wireless Handheld
-Original Message-
From: Lee Messenger
To: [EMAIL PROTECTED]
Sent: Fri Sep 06 12:00:36 2002
Subject: OSPF Stub area [7:52781
filters and they seem
to work fine, restricting incoming connections fromspecif addresses. Is it
something I am doing incorrect.
Anyone any idea's
Kind regards.
paul.
Paul Casey
O2 Ireland
Core Network Eng'g Team
76 Lower Baggot Street, Dublin 2.
> * Mob : +353 86 8143310
E
to the SDH network back to the core
talking to the 7200.
Is this possible to do without any sort of internetworking technology. such
as farme-relay ??
or is there no problems here at all
Any help appreciated.
Kind regards.
Paul
Paul Casey
O2 Ireland
Core Network Eng'g Team
76 Lowe
. 10.1.1.2
...
Therefore I ended up having to use two Public IP addresses ... one for the
interface and the other for the global NAT/PAT ...
Please tell me if Im incorrect !!!
Regards
Paul ...
- Original Message -
From: "nrf"
To:
Sent: Thursday, August 29, 2002 2:59 AM
Sub
I've also noticed that a CLEAR ARP will resolve the problem temporarily.
Very, very strange behaviour indeed.
Paul
[remove 'nospam' from my e-mail address to reply]
""David Armstrong"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
Hmmm, sounds like I need to do some more programming to fix it.
Sorry for the bug!
Paul
- Original Message -
From: "Mark W. Odette II"
To:
Sent: Tuesday, August 27, 2002 5:05 PM
Subject: RE: PSTN Router to Router ... [7:52132]
> Bill- if you're pasting url'
ut look at the consequences of not upgrading
your network to C1k compatability!
Paul
- Original Message -
From: "MADMAN"
To:
Sent: Tuesday, August 27, 2002 2:56 PM
Subject: Re: No longer 4 digits [7:52146]
> CCIE 1040 sits next to me and I asked him if Imran (sp?) was h
Hello all ...
I need to provide a tertiary backup for a remote site !!! I was thinking of
using PSTN Can this be done ??? I guess I would have to buy FXO cards
for
both routers ... or can you utilise the AUX ports ???
Any comments will be greatly received ..
Regards
Paul ...
Message
Yeah, thankx ...
I want to move to dynamic routing ... I was just wondering what your
experiences were ... and if there were any pitfalls I should avoid and
if you guy's think that RIPv2 will do the job fine Im not particularly
experienced ... hence my caution !!!
Cheers ...
does not
support EIGRP ! (If i am correct!)
I am not sure if I should use RIP IGRP etc. Have any of you guys experienced
this before and what would you suggest?
Kind regards
Paul
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=51599&
I am studying to take exam 640-604, and I am using BCMSN Cisco Press book. I
would like to get some input from whoever dominated this exam. Please let me
know which topics were mostly covered? Should the Cisco Press book be enough
of a resource besides the CCNP Routerim that I am using.
Message
You can't erase flash if it's in use.
Config t
boot system rom
wr
reload
blah blah
(router loads from boot rom image)
router(boot)#erase flash
(or change the config register manually then reload)
If it still doesn't erase even though nothing is running off it you might
try replacing the
Hi,
How are your setting a default route for this pix firewall?
- Paul
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=50565&t=50449
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.htm
MCSE, many people use it to do just that.
- Paul
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=50562&t=50530
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
Your flash is probably bad. I recently had a problem with some new flash
and had to return it because half of it was uneraseable. I never found
documentation or a solid answer for my error messages.
All Flash chips on a stick should be identical (or at least detectable I
guess).
Message Poste
What's a *cheap* source or brand for a 6+ port serial console switch (db9 or
rj45) with a 10bT telnet interface?
I don't have 1000 bucks to spend. I could get a 486 with some serial cards
if there really isnt anything out there.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=
Thanks BUT I forgot to mention I was in boot mode when I tried this inasmuch
as you can't delete a system image you are running from.
The main question is what do people know about flash write protection? Can
I unprotect these areas of flash or something so I can erase it? Is it some
attribute
A sure way is to go through the password recovery procedure again to boot
the router without loading any config file from nvram. When you get to an
enable prompt:
erase nvram (preferable - guaranteeing no old config files can be found)
or
erase startup
or
write erase
then power off and power on
I'm upgrading from 8 to 16 megs flash in my 2505 by adding an 8 meg stick.
I boot to ROM to erase the flash. The original 8mb erases fine but I get an
error when it starts on the second 8mb - "Flash is write protected" or
something very similar (sorry).
It will give that error throughout only a
Hey guys, let's kill this thread as it is digressing off topic. No
politics on GroupStudy. We have people from all over the world on this
server.
Take care,
Paul
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Ronald James
Sent: Sunday, Ju
ottom
telling the reader where to report NDA violations! First time posters
are sent an e-mail of which they must agree that the message is not an
NDA violation. And when you join the list you are sent a list of rules,
one of which strictly forbids NDA violations.
Paul Borghese
Warning: I am
Here is a forwarded message from the VP of silverpop about the spam
-Original Message-
From: George, Kevin [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 24, 2002 5:20 PM
To: '[EMAIL PROTECTED]'
Cc: '[EMAIL PROTECTED]'
Subject: Follow up on Vigilar complaint
ISDN point to point
between the MO and another BO with success. However, this situation is
really confusing me . I will reload the router as you suggest tomorrow
night .. and hope that makes a difference .. If not .. I guess it's back to
the old drawing board :)
Thankx again ..
Regards
solved ...
Can anyone please enlighten me :)
Kind regards
Paul ...
C4500-1#ping 10.209.31.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.209.31.1, timeout is 2 seconds:
ISDN BR0: Outgoing call id = 0x8FD2
ISDN BR1: Event: Call to 0123456789 at 64 Kb/s
ISDN BR1: received H
Below is an excerpt from an e-mail I received from vigilar.com.
Hopefully, it will not happen again. He gave me permission to send this
on the list.
Paul
-Original Message-
From: Palaniswamy Rajan [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 23, 2002 8:33 PM
To: Paul Borghese
complain to the silverpop hosting company, inflow:
[EMAIL PROTECTED] [EMAIL PROTECTED]
Please add to this list. Let's get these guys shutdown! They are culling
e-mail addresses from virtually every Cisco discussion group on the net (as
far as I can tell).
Paul
wrote in message
[EMAIL PROT
Yea, but most co-location facilities charge on a per u basis. While we
are currently being hosted for free at Swiftcomm, you never know when we
will need to pay again.
Therefore, I am trying to keep the footprint down to 1u.
Paul
-Original Message-
From: [EMAIL PROTECTED] [mailto
!
Paul
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=49453&t=49453
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
If you follow this group via the Newsfeed (nntp://news.groupstudy.com) you
may have missed a few messages from this morning. You can see what you
missed by going to the website:
http://www.groupstudy.com/form/list.php?f=7
Sorry for the inconvenience!
Paul Borghese
Message Posted at:
http
under RedHat Linux.
Any suggestions!
Paul Borghese
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=49438&t=49438
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report miscon
For a week or so, the CCIE proctors from Cisco
are answering ccie lab related questions at @!#$.
You can double check your questions there.
http://www.@!#$.com
- Paul
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=49087&
.
- Paul
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=49086&t=49060
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
o ISP error !!!
I am waiting for a newer Cisco VPN client Has anyone experienced
this
connectivity issue
Regards
Paul ...
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=49036&t=49036
--
FAQ, list archives, and
Can anyone help me with this.
How do you configure a router, so that when its neighbours make a BGP
change, the BGP change will take effect without resetting the BGP TCP
session.
Kind regards,
Paul
Hello
Can some tell me the requirments for atm for the lab
I have the following 3640 ATM Support (NM-4T1-IMA) and the 3640 routers.
Are those cards any good to me,
Do I need an ATM switch or can I put this stuff back to back.
Any help appreciated.
Kind regards.
Paul
Depending what your provider is selling you,
If the provider offers you an IP address for the WAN take, it as it makes
things easier to troubleshoot.
You usually use IP unnumbered on point to point links where the traffic
doesn't need to use the address because it is point to point and can reall
101 - 200 of 961 matches
Mail list logo