anyone know the pinouts?
""Dain Deutschman"" wrote in message
news:[EMAIL PROTECTED]
> Hi group,
>
> I'm curious to know if anyone has used a unix box in the same way as a
cisco
> 2511 terminal server with async octal cable ( in order to access other
> de
close, distribute, copy, print
or rely on this email, and should immediately delete it from your computer.
-Original Message-
From: Dain Deutschman [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 14, 2003 5:06 PM
To: [EMAIL PROTECTED]
Subject: OT: Unix and 2511 Access Router [7:73982]
Hi
Hi group,
I'm curious to know if anyone has used a unix box in the same way as a cisco
2511 terminal server with async octal cable ( in order to access other
device console ports ). One should be able to use the tty lines in unix in
the same way as a 2511 connected to other devices console
hi
it is ok the session is already open as it says. you only need to press
Enter. this is normal with switches.
thanx
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=73773&t=73656
--
**Please support GroupStudy by purchasing fro
Hi Oliver
Many thanks for your reply. Just to clarify, I am using the Octal cable to
connect to the console of the switch. Are you saying I should connect a
crossover cable to the end of the octal cable and then connect the cross
over into the console port of the switch ??
Cheers
Wallis
Message P
Does this also apply to an AS2511-rj router? I only need to use rollover
cables and not straight-thru? I just purchased a cheap as2511-rj but I am
having trouble getting it up and running. Any help would be nice.Daniel
Cotts wrote:
>
> If you are using a 2509/2511 series with octal cabl
If you are using a 2509/2511 series with octal cables and need to connect to
something like a CAT5500 with a Sup III - that requires a straight patch
cable to connect to its CON port - use the AUX port on the 2511 and the
patch cable.
> -Original Message-
> From: John Neiberger [
Thanks for helping a new Cisco gurl out! I truly appreciate it. I tried it
on my as2511 and it had a few hitches but I understand what i need to change.
Thanx
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=73767&t=73671
--
**Ple
I had a similar problem with a PIX-501. My solution was to add 'modem
cts-required' under the line configuration of the termainl server connected
to the PIX.
I dont think it is a cable issue... troubleshoot physical layer up. If you
can use a computer with a rollover cable and it works, you sho
HI All
I was wondering if any of you guys have come across reverse telnet problems
with the 2511 access server?
Basically I have 8 devices connected and when I reverse telnet to them all
is OK, but on when I try and connect to a 2900 XL switch I get this :
Termserver#telnet 192.168.1.1 2006
me across reverse telnet
> problems
> with the 2511 access server?
> Basically I have 8 devices connected and when I reverse telnet to them all
> is OK, but on when I try and connect to a 2900 XL switch I get this :
> Termserver#telnet 192.168.1.1 2006
> Trying 192.168.1.1, 2006
Scenarios starting at $20
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Paul Ingram
Sent: Thursday, August 07, 2003 9:12 AM
To: [EMAIL PROTECTED]
Subject: RE: Access server 2511 Reverse Telnet [7:73656]
Hello,
No ideas but I am getting the same problem
instead of two.
Here's a working config:
2511#sh run
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname 2511
!
logging console warnings
enable secret xx
!
ip subnet-zero
no ip d
Hi Oliver
Many thanks for your reply. Just to clarify, I am using the Octal cable to
connect to the console of the switch. Are you saying I should connect a
crossover cable to the end of the octal cable and then connect the cross
over into the console port of the switch ??
Cheers
Wallis
Message
Do you have "no exec" under your line 1 16?
> -Original Message-
> From: Wallis Short [mailto:[EMAIL PROTECTED]
> Sent: Thursday, August 07, 2003 5:33 AM
> To: [EMAIL PROTECTED]
> Subject: Access server 2511 Reverse Telnet [7:73656]
>
>
> HI All
>
Hello,
No ideas but I am getting the same problem!! I usually have to CTRL+SHIFt+6
out back to my TermServer. I try clearing the line 2 or 3 times and
sometimes I can connect other wise I have to recycle the 2511 and usually I
can get in but as soon as I leave line 7 or 8 (usually only happens
Wallis Short 8/7/03 9:08:01 AM >>>
>Hi Oliver
>Many thanks for your reply. Just to clarify, I am using the Octal cable to
>connect to the console of the switch. Are you saying I should connect a
>crossover cable to the end of the octal cable and then connect the cross
>over into the console p
: cisco 2511 Terminal Server for my first time! [7:53791]
I would highly recommend you use the ip host command for your telnet
connections. Bring down the possibility of fat fingering the keyboard.
You should configure the loopback ip address for the reverse telnet
E.g
] On Behalf Of
Jonathan V Hays
Sent: June 17, 2003 12:11 PM
To: [EMAIL PROTECTED]
Subject: Re: cisco 2511 Terminal Server for my first time! [7:53791]
??? wrote:
> Hi,
>
> I am setting up 2511 terminal server for my first time, but don't
work...
>
> this is m
??? wrote:
> Hi,
>
> I am setting up 2511 terminal server for my first time, but don't work...
>
> this is my 2511 configuration :
>
>
> line con 0
>
> line 1 16
> session-timeout 20
> exec-timeout 0 0
>
>
depends if its ever worked before?
could be a cabling issue if its never worked before. I like to have a
loopback cable/adapter to plug into the ports in these cases to see if I get
a response from the 2511.
if it was working before and now its not, its probably because a previous
seesion is
hi all
i have this 2511 and tried to reverse telnet to a 2503.
it opens up te port and remains idle.
please help
gimme two or three alternatvies in a go to try them out
please
thanx
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=66836&
I'm assuming your configuration is fine, but what do the controllers show
and are the interfaces showing any errors?
scott
""Tim Champion"" wrote in message
news:[EMAIL PROTECTED]
> Has anyone experienced, or heard of, the following problem:
>
> I recently bou
Has anyone experienced, or heard of, the following problem:
I recently bought a 2nd hand 2511 but only async interfaces 9-16 work. 1-8
receive data but do not transmit. Could it possibly be due to one of the
numerous jumper settings?
many thanks in advance.
Tim
Message Posted at:
http
Hi Alaerte,
Could you paste the configuration of your 2511 so that we can have a look at
it.
Brian.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=65838&t=65819
--
FAQ, list archives, and subscription in
No more than that would be needed:
ip host R1 2001 100.6.9.254
# address of your 2511 terminal server (any valid interface)
!
line 1 16
no exec
transport input all
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=65826&
ght a 2511 and am attempting to use it for
> reverse telnet. I have connected each of the octal cable RJ-45 cables into
a
> console port. I initiate a reverse telnet session and can recieve data,
i.e.
> when I power on the target router I recieve boot loader etc messages up
> until &
Help please! I have just bought a 2511 and am attempting to use it for
reverse telnet. I have connected each of the octal cable RJ-45 cables into a
console port. I initiate a reverse telnet session and can recieve data, i.e.
when I power on the target router I recieve boot loader etc messages up
om: Joupin [mailto:[EMAIL PROTECTED]
Sent: Monday, March 03, 2003 8:20 AM
To: [EMAIL PROTECTED]
Subject: Cisco 2511 and US robotics modem [7:64261]
Hi
I got really confused that Why can`t I connect e US ROBOTICS 56 k
Message modem to a Cisco 2511 Router ,
I think my problem is because of MODEM CA
Hi
I got really confused that Why can`t I connect e US ROBOTICS 56 k Message
modem to a Cisco 2511 Router ,
I think my problem is because of MODEM CAP Properties. where can I find a
Modem cap resources regarding this issue ?
ANy Response appreciated
Joupin
www.joupin.com
Message Posted at
yes, there is. check out this cisco page.
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a0080093c7b.shtml
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=59370&t=59366
--
FAQ, list archives, and s
I have a 2511 with a couple of other routers. I would like to connect the
other routers to the 2511 using the auxiliary port to create a backup
route. Is there a way to do it directly without using modems?
( something like connecting 2 routers using serial ports directlywith the
DB60-DB60 cable
You will not loose the configuration if you follow the steps correctly. All
it does is allow you to reset the password to one you can use.
http://www.cisco.com/warp/public/474/pswdrec_2500.html#sample
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=53851&t=53848
--
Hi All,
I have got a doubt on password breaking for Cisco 2511
Router.
As per the cisco document, if i break, will i loose the old
configuration?
Regards.. Anil
__
Do you Yahoo!?
New DSL Internet Access from SBC & Yahoo!
http://sbc.yahoo
interface Ethernet0
ip address 10.16.224.12 255.255.248.0
no ip route-cache
no ip mroute-cache
ip default-gateway 10.16.224.1
ip classless
ip alias 10.16.224.144 2001
ip alias 10.16.224.138 2002
line con 0
logging synchronous
line 1 16
no exec
transport input all
Larry Letterman
Network E
Hi,
I am setting up 2511 terminal server for my first time, but don't work...
this is my 2511 configuration :
line con 0
line 1 16
session-timeout 20
exec-timeout 0 0
line aux 0
line vty 0 4
password
login
In above, i found i missed one comma
Dear All,
Those intrested above used router, please contact me ASAP.
Thanks
Rgds,
Steiven Poh
Penang, Malaysia
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52881&t=52881
--
FAQ, list archives, and subscription info: http://
ubject: RE: 2511 Async [7:27749]
> It uses rolled cables. New ones ship with green colored flat cables. The
> great part is that you can easily create your own custom length cables.
>
> > -Original Message-
> > From: Dave Luancing [mailto:[EMAIL PROTECTED]]
> > Sent
IL PROTECTED]
> Subject: 2511 Async [7:27749]
>
>
> I am getting a 2500 Async router with the built in
> Async ports (RJ45). Does anyone know, do I use a
> straight thru cable or cisco rolled cable to speak to
> other cisco routers? I have previously only worked
> with t
I am getting a 2500 Async router with the built in
Async ports (RJ45). Does anyone know, do I use a
straight thru cable or cisco rolled cable to speak to
other cisco routers? I have previously only worked
with the Octel cables.
I also will be configuring this to speak to a modem
bank, has anyon
Hello guys..
I am going to do a flash sale for the catalysts 1200 and the cisco 2511's .
I need the money to buy different equipments..
I am selling the Catalyst 1200 for $250,00 and I give you the console
cable.If you buy 2 at a time I will make a good deal.
The 2511 I am selling for $850
Hello Team,
I know that the intention of this group is not to "sell" anything but to
help each other. But I am selling couple of 2511's and lots of catalyst's
1200 just to build a fair lab for studying for my CCNP and future CCIE.
Whoever is interested please send me an e-ma
Tom,
I can take care of you. Email me offline.
thanks,
-Brad Ellis
CCIE#5796
Network Learning Inc
[EMAIL PROTECTED]
used Cisco: www.optsys.net
""Tom Harrison"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi!
>
> I would like to buy 2
Hi!
I would like to buy 2501-2503-2522-2511 & 1912 switch.
I can buy from ebay but if anybody can give lesser price than ebay I can buy
in quantity.
My last purchased through auction 2503:$500
Regards
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i
x27;t work.
Best regards,
Cisco Breaker
""manhho nguyen"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I want to configure asyn callback in router 2511.
> the configuration is below, but when receive callback number from client,
> th
I want to configure asyn callback in router 2511.
the configuration is below, but when receive callback number from client,
the router cannot initiate callback function.
version 12.0
service password-encryption
!
hostname Router
!
boot system flash
enable secret 5 $1$XpI9
Dear group,
1.What are the key differences between 2511 and 2600 series?
2.Are they support modem pool hunting group?
Thanks!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15592&t=15592
--
FAQ, list archi
Dear Group
I must config systems include cisco 2511 , server NT setup Trustme 1.1 on
database SQL7.0 and watchword II of racal
pls show me how to config router to access the TrustMe server from remote
user with Watchword II over the PSTN
Message Posted at:
http://www.groupstudy.com/form
7;m curious if anybody knows of any inexpensive alternatives to the
> 2509/2511 routers to reverse telnet into console ports?
>
> I've seen some products online but they don't specifically state they will
> work for Cisco console access, and none of the sales reps are able to giv
Hi All,
I'm curious if anybody knows of any inexpensive alternatives to the
2509/2511 routers to reverse telnet into console ports?
I've seen some products online but they don't specifically state they will
work for Cisco console access, and none of the sales reps are able to g
Like the 2509/2511 there is an 8 port 508-cs and an 16 port 516-cs. I am
using a 516-cs in my home lab. It runs IOS, but only a version 10. Uses
regular rolled terminal cables to connect to the devices. It is working
fine for me.
Neil Schneider
""chica"" wro
hello,
i have an oppurtunity to buy a 500-CS access router in
place of a 2509/2511 access router for my Lab
practice.
I hear they serve the same purpose for the lab.My
question(s) is/are : in as much as they serve the same
purpose, would there be any difference HW/SW (e.g IOS
version running
u have 2 router and ofcourse you will have 2 Ethent
use one for gateway and one for isp Ip
What u want ??
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11303&t=11258
--
FAQ, list archives, and subscription info: http://www.gro
Nope- you can buy a Cisco 3101 (dual Ethernet) for a few hundred dollars to
accomplish this. I just replaced my 3101/ 2511 combination with a 2621 (2
FE) & a NM-16 async. The 3101 for Cisco is the best bet. One of lesser
expensive methods is buy a $100 Linksys NAT router/switch.
Really dumb (?) Question. Is there any way to add a second Ethernet
interface on a 2509 & 2511 by plugging a device into the Async Serial Port
or what have you. Want to use with cable modem at home but I believe that
requires 2 Ethernet connections.
Gary Butler
Message Posted at:
Yes, even with basic IP IOS.
> -Original Message-
> From: suaveguru [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, June 06, 2001 8:15 AM
> To: [EMAIL PROTECTED]
> Subject: Does 2511 cisco router able to handle BGP
routing? [7:7302]
>
>
> hi all
>
> I wond
hi all
I wonder if anyone can tell me cisco router 2511 able
to run BGP ?
regards,
suaveguru
__
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail - only $35
a year! http://personal.mail.yahoo.com/
Message Posted at:
http
et out.
--
Jason Roysdon, CCNP+Security/CCDP, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
-Original Message-
From: Frank Kim [mailto:[EMAIL PROTECTED]]
Sent: Friday, May 25, 2001 9:37 AM
To: Jason Roysdon
Subject: RE: CLARIFICATION: 251
Real simple: get a real telnet client that has a disconnect option (teraterm
is free and works great). As soon as the 2511 sees the telnet session close
it will drop the reverse telnet line out to the 2501 (you can very by show
line on the 2501 to verify it's not in use).
Teraterm also sup
So what you are saying is use a 14 TerraHertz gamma ray deionizing 12 bolt
chrome ray gun is the way to end that connection. Am I wrong.
Don
- Original Message -
From: "Frank Kim"
To:
Sent: Thursday, May 24, 2001 10:36 AM
Subject: Re: CLARIFICATION: 2511 with reverse-teln
Let's make it simple. Let's ignore the factor that there is a 2501
attached to a 2511's line 1. Just plain simple. You have:
1) 2511 router with e0 = 192.168.1.1/24
2) an NT box with ip address of 192.168.1.2/24
Assuming that you have configured line 1 on the 2511 with tran
Your telnet session is terminated at the 2511 but the
2511 redirects you out line 1 directly, so your not
getting a console/terminal session from the 2511. If
you telnet to the 2511 then out line 1, then your
using the 2511 as a console/terminal session so it
behaves differently. This is the way
uter which should
disconnect it.
If you are looking to suspend and resume your telnet
session, then the windows client will not do this. You
will have to open multiple telnet windows, or telnet
into the 2511 and reverse telnet from there. When
you're telneting from the 2511 the 2511 lets you
Kim|
|| |
|+--->
>|
||
| To:
[EMAIL PROTECTED] |
| cc: (bcc: Dom
Stocqueler/LON/GB/Reuters) |
| Subject: AT&T 7400D modem with 2511
[7:5705] |
| Header: Inte
Start Disconnect Activation
^^xnone - -^Y
The disconnect-character 25, which is a decimal equivalent of Control-Y in
ASCII.
So my question is, will this 'disconnect-character', in this case, it's
control-Y, tell the 2511 to kill the tcp sessi
Hi folks,
I got the above modem which currently only speak xon/xoff which is
flowcontrol software. Is there any hayes expert out there that can show
me how to initialize this modem so it will speak 'flowcontrol hardware'
? I got four of these modems that I use to dial into a
phoneswitch. Thanks
To: [EMAIL PROTECTED]
Subject: Re: CLARIFICATION: 2511 with reverse-telnet [7:5686]
Phil,
Yes you have misunderstood once again. Let me clarify. I sit on an NT
box. I use my mouse to click on start, then run, then i type in: telnet
192.168.1.1 2001 which brings me straight to the console of
Phil,
Yes you have misunderstood once again. Let me clarify. I sit on an NT
box. I use my mouse to click on start, then run, then i type in: telnet
192.168.1.1 2001 which brings me straight to the console of my 2501. Even
I am accessing my 2501 via a TCP session over the 2511, but it looks as
Frank-
If I understand you correctly - telnet to 2511, reverse telnet to 2501, and
you want to suspend your session from 2511 to 2501. I think this is what you
are looking for:
We use 2509RJ access servers at some of our sites to enable remote
management of multiple pieces of equipment from a
> bandwidth. But so far, I
> think I have been misunderstood. Here is what I
> got:
>
> 1) 2511 with e0 = 192.168.1.1/24
> 2) one 2501, console's port is attached to line 1 of
> 2511
> 3) one NT box with ip of 192.168.1.2/24
>
> I sit on my NT box and I initia
OK- you have NT client (Telnet)--2511-- async--2501. You have opened a
session with the 2511, to access the 2501 via async line 2001 (through the
first physical port on your octal cable). Your commands in the 2511 (Telnet
Hyper Term Window) only effect your relationship with the 2511/2501 or
Okay guys. I am really sorry for the waste of bandwidth. But so far, I
think I have been misunderstood. Here is what I got:
1) 2511 with e0 = 192.168.1.1/24
2) one 2501, console's port is attached to line 1 of 2511
3) one NT box with ip of 192.168.1.2/24
I sit on my NT box and I initi
Customer has 2511, he has modem attached to one of the Async
line and that modem is connected to one of the Unix server, he is sitting
on an NT machine connected to ethernet interface of Router, he uses a
telnet program to get connection to modem on Async line and then dial into
Unix box. After
Hi folks,
I need your help. I have a 2511 router with 16 async lines. I have a
modem attached to the first line, which is line 1. I normally allow my
users to sit on an NT box and telnet to the ip address of the ethernet
interface on the 2511 on port 2001 to get into the modem so they can dial
Sure, the 2511 and about $700 would make a fair trade for a 2621. Have you
checked the prices on eBay? I might make this trade if you are interested.
At 03:37 PM 5/16/01 -0400, Frank Kim wrote:
>Hi folks,
>I got a 2511 with 16megs flash and 16megs dram that I would like to trade
>f
Hi folks,
I got a 2511 with 16megs flash and 16megs dram that I would like to trade
for a 2621 router or equivalent. Reply directly to me if interested.
-Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4726&am
Try prodec..
They are not too far from youshould be somewhere on the M25,M4 area.
Site address is
prodec.co.uk
Wale Jones
>From: "Michael Ibidunni"
>Reply-To: "Michael Ibidunni"
>To: [EMAIL PROTECTED]
>Subject: Octal cable For 2509/2511 [7:4532]
stonewallcable.com
P
- Original Message -
From: "Michael Ibidunni"
To:
Sent: Tuesday, May 15, 2001 10:37 AM
Subject: Octal cable For 2509/2511 [7:4532]
> Folks,
>
> Can some please point me to a site where I can get an octal cable for
> use with a 2509/2511 t
Folks,
Can some please point me to a site where I can get an octal cable for
use with a 2509/2511 that has the SCSI async interface.
Thanx in advance
Michael ibidunni
Systems Engineer
(City/M25)
ntl:
Phone: 0207 562 5811
Fax: 07866 625922
Email: [EMAIL PROTECTED
sorry about that.. that last one got away from me.
start reading here:
http://www.cisco.com/warp/public/793/access_dial/comm_server.html
Kevin Wigle
- Original Message -
From: "Mark Rose"
To:
Sent: Saturday, 12 May, 2001 10:56
Subject: Cisco 2511 [7:4267]
> I
start reading here:
- Original Message -
From: "Mark Rose"
To:
Sent: Saturday, 12 May, 2001 10:56
Subject: Cisco 2511 [7:4267]
> I recently was loaned a Cisco 2511. I would like to set it up to be able
to
> access it over the net from work. I have not been
I recently was loaned a Cisco 2511. I would like to set it up to be able to
access it over the net from work. I have not been able to located
instructions on to program it to access my other routers via the async
ports. Can someone steer me in the right direction
TIA
Mark
Message Posted at
Hi everyone,
I have a 2511 that needs some TLC that I would like
to offer to the group here at a special price. It
is a CiscoPro (but upgraded to run full IOS) 2511.
The s0 port is flaky on it, I can't get s0 to work.
However, both Octopus Async ports, and s1, and e0, con,
aux, etc ar
Hi folks,
I would like to trade my 2511(terminal server) router that comes with
16megs of flash and 16megs of dram and my Catalyst 1924 EN menu-driven
switch for a Catalyst 2900 that does CatOS or a CAT5000. I don't mind
paying a bit extra for the CAT5000. Please reply if interested.
-
Alex,
Yes you are correct all you need to do is set up the DCE end with the clock
rate command and a valid ip and you should be ready to go.
Raul
- Original Message -
From:
To:
Sent: Monday, May 07, 2001 10:37 AM
Subject: Re: 2511 between cable modem and network
>
>
> Mr.
12.1(2)T supports "ip address dhcp". At least on the 4500-m.
-Original Message-
From: Rick Cossey [mailto:[EMAIL PROTECTED]]
Sent: Friday, April 27, 2001 5:00 PM
To: [EMAIL PROTECTED]
Subject: Re: 2511 between cable modem and network [7:2312]
Raul,
Please explain what you
Thanks to all that responded to this original thread...it is now over. What
I found is a 2511 with only ansyc line number 16 working and all others
broken - that's it, plain and simple. I have since purchased another 2511
and it work just like it should.
thanks
- Original Me
. I am using a 2511, sure there maybe other ways but I did
not want to bid on a 2 ethernet port 2500 router.
Raul
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Rick Cossey
Sent: Friday, April 27, 2001 8:00 PM
To: [EMAIL PROTECTED]
Subject: Re: 2511
the router, thats how
I
> do it.
>
> Raul
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Kevin Wigle
> Sent: Friday, April 27, 2001 4:16 PM
> To: [EMAIL PROTECTED]
> Subject: Re: 2511 between cable modem and network [7:2312]
&g
Or run nat overload off the 1 ethernet interface on the router, thats how I
do it.
Raul
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Kevin Wigle
Sent: Friday, April 27, 2001 4:16 PM
To: [EMAIL PROTECTED]
Subject: Re: 2511 between cable modem and
quick answer - no
The connection to the cable modem is ethernet. Don't get confused by the
term "modem".
You need a router with 2 ethernet ports.
Kevin Wigle
- Original Message -
From: Roberts, Timothy
To:
Sent: Friday, April 27, 2001 3:52 PM
Subject: 2511 between
Can a 2511 be setup to connect a cable modem (ethernet) to a network segment
(ethernet)? I was going to use a 4000 but I do not have the flash
requirements to run 12.1 code so that I can make use of the "ip address
dhcp". Can I use one of the Async ports to connect to the cable
Add to the 2511:
line 1 16
speed 9600
databits 8
parity none
STOPBITS 1
flowcontrol none
**
>From the output of the "sh line 1" of the 2511 I see that the stopbits = 2;
which is the default.
If that does not do the trick, verify that you are
Try this
On terminal Server 2511, do not use "no
exec" command.
It will fix this problem..
Arun
--- perryb wrote:
> Hello,
>
> I'm still having 2511 terminal server reverse telnet
> problems. This may be
> a little long, but I wan
I agree they boot slowbut its the same basic commands to get around
in one of these as in a 2509 or 2511. I picked up a CS-516 for like
$300but of course, more people are realizing that all you need to
practice
terminal server commands is one of these babies so the prices are on the
Nah, that's not the problem, but thank you anyway. I'm fearing that it may
actually be my 2511 because I have no problem doing the rev telnet through
the 2511s aux port.
By the way, the aux, console, and all the async line default to 8 N 2 @ 9600
- Original Message -
From: &q
.
-- Kevin
- Original Message -
From: "perryb" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, April 05, 2001 2:02 PM
Subject: 2511 Reverse Telnet Problems - Long
> Hello,
>
> I'm still having 2511 terminal server reverse telnet problems. Thi
Hello,
I'm still having 2511 terminal server reverse telnet problems. This may be
a little long, but I want to provide all the details. Before I ramble on,
is there any way to verify that the 2511 line interface hardware is not
broken ? I've swapped out my octal cable and I've
Can't be 16/32 RAM that I know of (max should be 16/16)... Check Ebay under
Cisco 2511 (previous sales) & you should see the going price. I would say
900-is would be fair to both parties.
http://search.ebay.com/search/search.dll?MfcISAPICommand=GetResult&ht=1&Sort
Property=
PM
Subject: Re: 2509 image (was 508-CS versus 2509/2511)
> 3 things to consider when asking for the 'good' IOS version to use:
>
> 1. what purpose is the termserver going to serve?
> 2. how much flash is onboard? (although apparently you can use a
> compression utility to
1 - 100 of 184 matches
Mail list logo
