PROTECTED]
Onderwerp: home lab equipment [7:75115]
Group,
I'm planning on purchasing my final addition to my R&S home lab sometime
this month. I'm having a hard time deciding if I should add another 3550
(I have one already) or if I should pick up a Lightstream 1010 with two
4
Which set of equipment (3550 vs ATM) can have the more devious requirements
in the lab? If two 3550s then buy it. If the ATM then buy it. I'd lean
towards the 3550 and rent time for the ATM. I have no LAB experience to back
up my opinion. Be forewarned.
> -Original Message-
>
Group,
I'm planning on purchasing my final addition to my R&S home lab sometime
this month. I'm having a hard time deciding if I should add another 3550
(I have one already) or if I should pick up a Lightstream 1010 with two
4500s that have an OC3 MM interface. ATM for the 36
hi all,
selling my ccie lab equipment ...
will accept offers from germany/europe because I'm located in germany
(munich)
the equipment is used only a couple of days and can be regarded as
new(except of the 2503 and cat2901)
pls make offers via email
thanks
monti
R1: 2610(16/48) 1 eth , W
I'm scheduled to take the CCIE R&S lab on 9/15. I would like to exchange
with any later lab date. Please contact me asap if you're interested in
swapping the lab date.
James Pham
Network Engineer
MAINTECH
714-283-7358 (Work)
714-401-1435 (Mobil)
Message Posted at:
http://www.
Aspiring Cisco Gurl wrote:
>
> Do these lab companions have specific labs for study or does it
> only work off of the Network Academy books? Basically, what I
> am asking is if they can be used separately with my own home
> lab versus do I need to get the whole package of Ne
Do these lab companions have specific labs for study or does it only work
off of the Network Academy books? Basically, what I am asking is if they
can be used separately with my own home lab versus do I need to get the
whole package of Network Academy companion book, lab book, and journal?
(What
Magdy Ibrahim wrote:
>
> Hi All,
> I am wondering If I can find any help here regarding this case
> but I am
> trying as I knew that most of the list members are involved in
> Networking
> and communications
> Ok, Now I am trying to build CCNP LAB here for stud
Sent: Tuesday, August 26, 2003 2:26 AM
> To: [EMAIL PROTECTED]
> Subject: CCNP Lab design and Topology [7:74389]
>
>
> Hi All,
> I am wondering If I can find any help here regarding this
> case but I am
> trying as I knew that most of the list members are involved
> in
Hi All,
I am wondering If I can find any help here regarding this case but I am
trying as I knew that most of the list members are involved in Networking
and communications
Ok, Now I am trying to build CCNP LAB here for studying purposes in Cairo
University, Egypt..
This lab will use for CCNP
Hi All,
I am wondering If I can find any help here regarding this case but I am
trying as I knew that most of the list members are involved in Networking
and communications
Ok, Now I am trying to build CCNP LAB here for studying purposes in Cairo
University, Egypt..
This lab will use for CCNP
I dont know if my previous post got up there cuz I didnt see it on the
replies but I first picked up 3 2503s and a 2912 switch. I think that is a
good start.
I picked up the 2503 versus 2501 bc I can, in the future, learn the ISDN
topics when I buy an ISDN simulator.
Message Posted at:
http://w
Hi Group:
I am new to the list and have been reading some of the posts. I have a
question. I am pursuing my CCNA and have been thinking about putting
together a practice lab. I have used the router stimulators but wanted
to know if any of you out there have a practice lab and what your
Hi Group:
I am new to the list and have been reading some of the posts. I have a
question. I am pursuing my CCNA and have been thinking about putting
together a practice lab. I have used the router stimulators but wanted
to know if any of you out there have a practice lab and what your
It looks promising.
They say it fully supports the Cisco IOS.
http://www.gambitcomm.com/site/products/index_vlab.html
Thanks for your opinions
Chris
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=74182&t=74182
--
**Please suppor
)
Network Learning Inc
[EMAIL PROTECTED]
www.ccbootcamp.com (cisco training)
""David Power"" wrote in message
news:[EMAIL PROTECTED]
> Hello,
> I have three 2500 routers (2x2503 and 1x2514) with the budget of 1000$ I
am
> planning to buy some more routers for my CCIE h
I know that having two 2610s... you could not train on 802.1q or ISL. Well,
actually you can perform 802.1q but you must have IOS 12.2T series IOS. I
know that is one drawback because I have concerns for having a couple of
2610s but I also have a 3640 too.
Message Posted at:
http://www.groupstu
out
any kind of LANE configuration on the lab. And they said "An ATM switch is
required to practice SVC-based scenarios; the switch can also be used for
various server functions in a test setup."
Fortunately, we have a bunch of old Nortel Centillions that hopefully will
work just fine.
a
thought.
Ian
http://www.ccie4u.com
Rack Rentals and Lab Scenarios starting at $20
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Tuesday, August 12, 2003 1:36 PM
To: [EMAIL PROTECTED]
Subject: RE: 2x2610 vs 2600 + 3640: WAS Re: CCIE Lab Setup [7:73612]
>Fro
On this same thread...
What are the recommendations for ATM lab hardware?
Can ATM be practiced with ATM ports connected back-to-back or is it
necessary to get an ATM switch also?
Thanks.
Vijay Ramcharan
-Original Message-
From: "Chuck Whose Road is Ever Shorter" [mai
Hi All
i have oct22nd lab date in san jose and looking for early Sep in san
jose...if anyone would like to swap please e-mail me at
[EMAIL PROTECTED]
thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=73782&
I honestly do not know what you are referring to. A plug on one side and a
jack on the other? I am probably missing something simple but nothing rings
a bell!!! Of course, I am a girl from Thailand and maybe my "slang" English
is not up to par. Hee hee
Can you please explain what that is about
te it from your computer.
-Original Message-
From: Natchaya Radhikulkaralak [mailto:[EMAIL PROTECTED]
Sent: Friday, August 08, 2003 6:10 PM
To: [EMAIL PROTECTED]
Subject: RE: CCNP and future CCIE lab setup [7:73696]
I honestly do not know what you are referring to. A plug on one side
ood luck and have fun.
> -Original Message-
> From: Natchaya Radhikulkaralak [mailto:[EMAIL PROTECTED]
> Sent: Thursday, August 07, 2003 6:46 PM
> To: [EMAIL PROTECTED]
> Subject: CCNP and future CCIE lab setup [7:73696]
>
>
> Like the other person previously... I
LOOKING FOR LAB PARTNERS. FOR CCIE R/S. PLANNING TO TAKE AROUND NOVEMBER.
PLSE CONTACT ON [EMAIL PROTECTED]/[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=73872&t=73872
--
**Please support Group
""Vijay Ramcharan"" wrote in message
news:[EMAIL PROTECTED]
> Not exactly related to this but...
> Are there any drawbacks to using (2) 2610s for a lab instead of a 2600
> and a 3640 router?
JMHO, what you should be looking for is sufficient ports to run complex
p
>From what I have heard, you are not asked to configure ATM switches, so back
to back connection would be ok.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=73930&t=73612
--
**Please support GroupStudy by purchasing from the GroupS
: RE: CCNP and future CCIE lab setup [7:73696]
You have a great start. Let's consider what you have. The 2500s are great.
In time, you will want to load an Enterprise version of IOS. That requires
16 MB Flash and 16 MB DRAM. There are many sources of third party DRAM and
Flash - check the archi
EMAIL PROTECTED]
Sent: Friday, August 08, 2003 5:10 PM
To: [EMAIL PROTECTED]
Subject: RE: CCNP and future CCIE lab setup [7:73696]
I honestly do not know what you are referring to. A plug on one side and a
jack on the other? I am probably missing something simple but nothing rings
a bell!!! Of course,
It is for R&S (ccie)
Thanks
>From: "Nakul Malik"
>Reply-To: "Nakul Malik"
>To: [EMAIL PROTECTED]
>Subject: Re: CCIE Lab Setup [7:73612]
>Date: Wed, 6 Aug 2003 16:00:46 GMT
>
>Which track are you studying for?
>
>If you need a PIX and like
Actually, that is not true. A 2611 can do 802.1Q inter-vlan routing but
cannot do ISL trunking. Of course, I am getting this information from the
Cisco website... but if you know differently... please inform me.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=73857&t=73612
Which track are you studying for?
If you need a PIX and like most of us cant afford to buy everything you need
for your lab, i would suggest building your own. I dont know how this stands
legally, but from a technical aspect it is possible to build your own PIX
clone. You can find detailed
Not exactly related to this but...
Are there any drawbacks to using (2) 2610s for a lab instead of a 2600
and a 3640 router?
Vijay Ramcharan
-Original Message-
From: Natchaya Radhikulkaralak [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 07, 2003 7:44 PM
To: [EMAIL PROTECTED
Like the other person previously... I am trying to build a lab.
I am personally starting my Cisco track but I have recieved some routers
from my work.
I personally have 2-2501, 3-2503, 1-2504, 1-as2511-rj(which I dont know how
to use), 1-2611, 1-2612, 1-3640 w/ 8 a/s module: 2ME-2W module: 4
h a NP-4T might be even better (but loud!!) This
> will take
> perhaps 300 dollars or so. You could add another 4 serial ints
> and/or a
> bunch of ethernet ints, and this could definitely serve as a
> full-fledged
> lab router as well as a frame switch.
>
> If you can find
if you are
lucky.
A 4500 with a NP-4T might be even better (but loud!!) This will take
perhaps 300 dollars or so. You could add another 4 serial ints and/or a
bunch of ethernet ints, and this could definitely serve as a full-fledged
lab router as well as a frame switch.
If you can find a cheap ISDN
Hello,
I have three 2500 routers (2x2503 and 1x2514) with the budget of 1000$ I am
planning to buy some more routers for my CCIE home lab. Which routers or
switches I must have ( with in my $ limits or couple hundred more).
Every suggestion will be appreciated
David
B0S0N.
Lab next, will work at home on pix and routers, for say 6-12 mths, whenever
I am ready. (as you already thought, mileage may vary)
I also hold CISSP.
Martijn
-Oorspronkelijk bericht-
Van: d tran [mailto:[EMAIL PROTECTED]
Verzonden: zaterdag 2 augustus 2003 2:32
Aan: [EMAIL PROTECTED
Everyone,
Has anyone taken the CCIE security lab exam recently? Please email me
offline what your think about it. How much preparation did you put into
prior
to the exam? Thanks.
D.
-
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
Message
ALL lab books will help - I've been working in Networking for nearly ten
years, with Cisco products for 6-7 years - mainly in the field. I only
attempted the lab to get extra time to do it & used 1 LAB Study Guide
(Hutnik/Satterlee) & some old sample labs.
They ask you to do so much
ue in
> someone who is satisfied in achieving something half-assed..
Well, I guess it's not like they also add "and I don't even want to try the
lab", is it?
Once I saw a resume though that said something like "Passed CCIE written
test, which is half way of achieving C
Juan Blanco wrote:
>
> Team,
> Your opinion is always accepted as a good advice...Question if
> you are at a
> point where
> you are running out of time for the lab, what will be more
> efficient, take
> the lab (spend $2000[traveling and the lab fees]) or let your
&g
With the assumption this will be your first attempt, let me counter with
another question. How much is the experience worth to you of sitting a lab
to experience the situation and see the difficulty of the questions? It will
demonstrate the topics that need improvement. Would the same money be
I'd take the lab the experience will help you a lot - less pressure for
the next 'real' attempt. But then, I wasn't paying.
-Original Message-
From: Juan Blanco [mailto:[EMAIL PROTECTED]
Sent: 31 July 2003 18:35
To: 'Joel Satterley'; [EMAIL PR
00
[EMAIL PROTECTED]
> -Original Message-
> From: Juan Blanco [mailto:[EMAIL PROTECTED]
> Sent: Thursday, July 31, 2003 12:35 PM
> To: [EMAIL PROTECTED]
> Subject: RE: CCIE Lab experience! [7:73263]
>
>
> Team,
> Your opinion is always accepted as a good advice...Quest
I just can't see it happening (pass the CCIE lab with only reading books).
I'm a CCNP/CCDP with a good, solid three years of hands-on Cisco experience
under my belt and can't believe what I've learned by being able to actually
configure and troubleshoot the equipment. There
Team,
Your opinion is always accepted as a good advice...Question if you are at a
point where
you are running out of time for the lab, what will be more efficient, take
the lab (spend $2000[traveling and the lab fees]) or let your written
qualifications expired and take it again[spend $300
Hi Joel,
After doing the lab could you tell us if there was Labs books that helped
you? (and which one does not even get closed?)
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=73296&t=73263
--
FAQ, list archi
""Creighton, Bill, NSPM"" wrote in message
news:[EMAIL PROTECTED]
> The day I meet ANYONE who can pass the CCIE lab by reading alone and no
> practical experience on a router or switch is the day I stop pursuing my
> Cisco certs.
I don't know. Superman became a
hehehe ye.
I'll do the same
""Creighton, Bill, NSPM"" wrote in message
news:[EMAIL PROTECTED]
> The day I meet ANYONE who can pass the CCIE lab by reading alone and no
> practical experience on a router or switch is the day I stop pursuing my
> Cisco certs.
I took the lab recently (before my time ran out) & there is a full day of
config to do. Lots of everything & some nice little surprises.
A couple of the guys on the same day were caught out by the wording & the
way the questions were structured. You have to be able to understand it
The day I meet ANYONE who can pass the CCIE lab by reading alone and no
practical experience on a router or switch is the day I stop pursuing my
Cisco certs.
Bill Creighton CCNP
Network Design Engineer, eVPN
NSPM AT&T Business Service Delivery
> -Original Message-
> From: Re
Alex,
Congratulations on passing your NP exam(s). The lab exam is no longer the 2
day format. Details can be found at the following URL:
http://www.cisco.com/en/US/learning/le3/le11/learning_ccie_lab_exam.html
You must have more than just knowledge, but also speed - the ability to type
very fast
Reimer, Fred wrote:
> As far as I understand, the lab is not 2 days anymore. It is only one day.
> And they don't break things and have you find and fix them. You just have
> to configure the network correctly and answer some questions. You could
> pass the lab by just reading
As far as I understand, the lab is not 2 days anymore. It is only one day.
And they don't break things and have you find and fix them. You just have
to configure the network correctly and answer some questions. You could
pass the lab by just reading books, but you'd have to hav
to pass without practice. I have passed my CCNP by
only reading books and downloading simulation programs.
Can somebody give me advice whether I could carry on without real hand on
experince?
Is there some way to volonteer to work for free?
Is there some way to get free CCIE Lab experience
Hello,
I am working on chapter 18 "CCIE Practical Studies volume 1"
Is there any one like to work it out with me???
Cheers,
HT
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=73235&t=73235
--
FAQ, list archives, and subscriptio
Hi
Yes ... I will be gorging for it :)
""Vijay Anand"" wrote in message
news:[EMAIL PROTECTED]
> hello all,
>
> is anyone talking ccie lab exam on sept month in b'lore??
>
> thanx
> VijayAnand
>
> SMS using the Yahoo! Messenger;Dow
hello all,
is anyone talking ccie lab exam on sept month in b'lore??
thanx
VijayAnand
SMS using the Yahoo! Messenger;Download latest version.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=73228&t=73228
---
lab and
pieceing it together router by router. Good luck with your lab building =)
""i d"" wrote in message
news:[EMAIL PROTECTED]
> Hi I am beginning my studies for my CCNP. I work with routers and
switches
> at work, and Before that I also took the courses. But I want
Sounds pretty good.
The 2900 is the deal maker...
-Original Message-
From: i d [mailto:[EMAIL PROTECTED]
Sent: Tuesday, July 29, 2003 12:03 PM
To: [EMAIL PROTECTED]
Subject: SHould I buy this CCNP lab? [7:73175]
2501x2 2503x2 2514 2912
For a little over 1 grand? Does this sound
have. Otherwise you have to mess with the rom chips etc. Good luck with your
lab those pieces make up a good portion of my lab as well.
""i d"" wrote in message
news:[EMAIL PROTECTED]
> 2501x2 2503x2 2514 2912
>
> For a little over 1 grand? Does this sound l
Sounds pretty good.
The 2900 is the deal maker...
-Original Message-
From: i d [mailto:[EMAIL PROTECTED]
Sent: Tuesday, July 29, 2003 12:03 PM
To: [EMAIL PROTECTED]
Subject: SHould I buy this CCNP lab? [7:73175]
2501x2 2503x2 2514 2912
For a little over 1 grand? Does this sound
Hi I am beginning my studies for my CCNP. I work with routers and switches
at work, and Before that I also took the courses. But I want to have a full
CCNP lab now while I read on my own to fiddle around with, and incorporate
into my Solaris/Win2000/2003/Linux network. I was wondering what
2501x2 2503x2 2514 2912
For a little over 1 grand? Does this sound like a good lab and fair price?
thanks! heres the break down
Each router has 16MB of DRAM and 16MB of Flash Memory
Each router loaded with IOS Software version 12.2(17a) Enterprise Plus
version.
CISCO Catalyst WS-C2912
Hey guys, I mentioned a while back about sharing my routers out to the
internet. I got it up and running. Thanks for all the help. It's 3 2501's
and 1 older cat 1924 switch. I was hoping to share it out for free but
ended up spending a little more dough than planned setting it up. I ended up
put
ime only a single ping. Same config
different ios's behave differently.
That is going to give trouble when doing dial backup, ddr, watch, you name
it.
Maybe someone has some experience with 12.2(x) or 12.2(x)T versions for the
1600/2500 fr r&s lab?
Martijn
ps I'll ask it at
mpls, and you would have plenty to go by.
-luan
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Eyabane Patasse
Sent: Tuesday, July 22, 2003 8:27 PM
To: [EMAIL PROTECTED]
Subject: MPLS simulated lab at home [7:72759]
I am looking for sample MPLS scenarios
: [EMAIL PROTECTED]
Subject: MPLS simulated lab at home [7:72759]
I am looking for sample MPLS scenarios that i can reproduce on my home lab
to create an MPLS network, just for the knowledge of the technology. if
anyone has some good links, or sample configs, please be kind to share.
Regards & Th
I like the starting point in Stephen Hutnik and Michael Satterlee book (All
in One CCIE.
MPLS and VPN worked great in our lab, with 2500 routers.
Unfortunately, it is impossible to reproduce MPLS Traffic Engineering on
2500. The router crashes.
Hope Helps.
Message Posted at:
http
mpls, and you would have plenty to go by.
-luan
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Eyabane Patasse
Sent: Tuesday, July 22, 2003 8:27 PM
To: [EMAIL PROTECTED]
Subject: MPLS simulated lab at home [7:72759]
I am looking for sample MPLS scenarios
: [EMAIL PROTECTED]
Subject: MPLS simulated lab at home [7:72759]
I am looking for sample MPLS scenarios that i can reproduce on my home lab
to create an MPLS network, just for the knowledge of the technology. if
anyone has some good links, or sample configs, please be kind to share.
Regards & Th
Has anyone use Todd Lammle's Virtual Lab? Is it useful for CCNP prep?
Alan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=72757&t=72731
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/li
I am looking for sample MPLS scenarios that i can reproduce on my home lab
to create an MPLS network, just for the knowledge of the technology. if
anyone has some good links, or sample configs, please be kind to share.
Regards & Th
: [EMAIL PROTECTED]
Subject: Practice lab [7:72731]
I am currently working towards my CCNP after getting my CCNA. Problem
is I no longer have access to any routers. I can read the books and get
the knowledge needed to pass the exams. But I also want the practical
experience to go along with it
Hi Guys,
Can anyone please advise me a good resource to buy used/refurbished lab
equipment for CCIE prepation in Calgary, Alberta, Canada location? Any other
resource in Canada is also welcome.
Thanks.
Bharat
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=72740&
PROTECTED]
Subject: Practice lab [7:72731]
I am currently working towards my CCNP after getting my CCNA. Problem is I
no longer have access to any routers. I can read the books and get the
knowledge needed to pass the exams. But I also want the practical
experience to go along with it. How does
1) Labs available on the Internet. See archives for lists.
2) Form a group of folks in your area. Each person buys one box and the
group builds a lab.
3) If the company where you work has many production routers, there is a
chance there are older boxes or spares hidden away - sometimes at multiple
I am currently working towards my CCNP after getting my CCNA. Problem is I
no longer have access to any routers. I can read the books and get the
knowledge needed to pass the exams. But I also want the practical
experience to go along with it. How does someone on a low budget get access
to equi
I have heard of the router sim from Sybex
http://www.routersim.com
Is this any good.
-Original Message-
From: Alan Ho [mailto:[EMAIL PROTECTED]
Sent: Friday, July 11, 2003 10:55 PM
To: [EMAIL PROTECTED]
Subject: CCNP Lab Simulator [7:72167]
I am preparing for the CCNP certification
For those you whom have encountered the CCIE C&S Lab exams, What list of
books would you recommend as being most have items. Furthermore, I think? a
new version of the " Caslow CCIE book " is being published soon? but I am
considering getting the existing version for revision. Esp
I would definitely be interested in the on-line study group for BGP. I am
also studying for my CCNP. Let me know if you get enough response.
-Original Message-
From: Nakul Malik
Sent: Wed Jul 16 00:35:39 2003
To: [EMAIL PROTECTED]
Subject:CCNP Lab Partners [7:72364]
Hi
Hi,
I am looking for lab partners in New delhi and/or NCR.
CCNP and other misc. topics.
Especially BGP, in-depth.
Also, looking to start an online studygroup for BGP if there are enough
people interested.
Anyone?
-Nakul
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7
Hi,
I am looking for lab partners in New delhi and/or NCR.
CCNP and other misc. topics.
Especially BGP, in-depth.
Also, looking to start an online studygroup for BGP if there are enough
people interested.
Anyone?
-Nakul
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7
Hi,
I am looking for lab partners in New Delhi / NCR.
CCNP or other misc. topics.
Also, need some people who wanna get down and dirty with BGP. Both
theoretically and practically.
Also looking to form an online study group on in-depth BGP.
Anyone interested??
Mail or call me and if there is
I don't mind being a labmate. Tell me when, where, how.
Dallas, TX
- Original Message -
From: "Brian W."
To:
Sent: Tuesday, July 15, 2003 1:18 AM
Subject: Re: want lab mates [7:71980]
> I'll ask, since no one else has, city, state, or country please?
>
>
I'll ask, since no one else has, city, state, or country please?
Brian
- Original Message -
From: "2000 technologie"
To:
Sent: Monday, July 14, 2003 9:53 AM
Subject: Re: want lab mates [7:71980]
> hi
> i need some friends for lab
>
>
> [EMAIL PR
I couldn't agree more, buy from Ebay! Also if you already have purchased a
lab book, buy equipment that fits its topology or look at the available lab
books on the market that you may purchase and construct a lab that would
accommodate any of their topologies. Like IPExpert, CCBootCam
I recommend ebay as well. I created a a lab for well under their cost (that
included VOIP).
""Vijay Ramcharan"" wrote in message
news:[EMAIL PROTECTED]
> I'm shopping around for a CCIE lab kit. I've put down 3 sites as likely
> candidates where I'
Buy from ebay (thos sites you mentioned charge too much!)
-Original Message-
From: Vijay Ramcharan [mailto:[EMAIL PROTECTED]
Sent: Monday, July 14, 2003 12:05 PM
To: [EMAIL PROTECTED]
Subject: CCIE Lab Kit [7:72241]
I'm shopping around for a CCIE lab kit. I've put down
Hello,
I need to give the CCIE exam in September'03 in San jose. But the date
is not available.
I got a date in Brussels, Belgium for Sep 09 . But since I am out of
work , I am not able to afford to go to Brussels.
Hence anybody is willing to exchange the exam date /location with me
will be h
hi
i need some friends for lab
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=72249&t=71980
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report miscon
I'm shopping around for a CCIE lab kit. I've put down 3 sites as likely
candidates where I'll be buying from;
www.chipsettech.com
www.optsys.com
www.layer7labs.com
Any advice on which one I should choose to get the best bang for the
buck? Any sort of feedback would be welcome.
I am preparing for the CCNP certification.
Anyone know of a good CCNP Lab Simulator? Please provide experience and
details.
Thanks
Alan
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=72167&t=72167
--
FAQ, list archi
Has anyone seen this lab book yet??
http://www.netmasterclass.net/site/doit1.php
Thanks, Jason
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=72157&t=72157
--
FAQ, list archives, and subscription in
In the pas I used regular non Cisco memory and it worked fine. Just
make sure it's similar (number of pins, speed, etc).
Ian
www.ccie4u.com
Rack Rentals and Lab Scenarios starting at $20
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Shawn Sousa
hello
am also planing to take lab on sept in b'lore,so i think ,v can work
together ,
i added u in my yahoo mess [EMAIL PROTECTED]
and u can contact me ,tel 0484-2360760
thanx
VijayAnand
2000 technologie wrote:
Hi
iam looking for lab mates planing to take my lab in september in india
Hi
iam looking for lab mates planing to take my lab in september in india
plse contact me on yahoo messenger [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=71980&t=71980
--
FAQ, list archives, and subs
I have an older PIX 525 that only has 32Mb of memory and Im looking to
upgrade it to 128Mb so I can put the latest version of PIXOS on it. Does
anyone know of either an inexpensive place to purchase "128mb Cisco Approved
Memory SM564168574N6BP" or a third party undocumented alternative source?
M
You need to know EVERYTHING.
I took & failed last week.
RIPv2, OSPF, EIGRP, IS-IS, BGP - all redistributing into each other..
-Original Message-
From: alaerte Vidali [mailto:[EMAIL PROTECTED]
Sent: 04 July 2003 22:38
To: [EMAIL PROTECTED]
Subject: RE: CCIE Lab !!! [7:7
1 - 100 of 3583 matches
Mail list logo