Stus-List Surplus Boat Parts

upsetting to some" Next will be the chainsaws. https://www.youtube.com/watch?v=APD4N2oNHrg https://www.youtube.com/watch?v=B-mSNJSMMyY Bill Coleman Erie PA

Stus-List Re: Minimum list of Tools to be kept onboard a boat

to think I would remember to remove the batteries from these in the fall, and come back in the spring to find them all corroded. There, I'll stop now. Bill Coleman Entrada, Erie PA On Wed, Nov 9, 2022 at 1:57 PM Shawn Wright via CnC-List < cnc-list@cnc-list.com> wrote: > I carry

Stus-List Re: 3M 4200

ine, or what we use here for SS is Anchorlube G771 It looks like Practical Sailor agrees with you on the pins - https://www.practical-sailor.com/safety-seamanship/offshore-log-in-use-report-atkins-hoyle-deck-hatches Bill Coleman Entrada, Erie PA On Mon, Nov 7, 2022 at 9:33 AM John Read via

Stus-List Re: 3M 4200

My first thought is, why do you have to remove the hatch frame itself? If it's attached that well, can't you just leave it there and remove the lid and have a new lens put in, and put new gasket in? Bill Coleman On Mon, Nov 7, 2022, 07:58 John Read via CnC-List wrote: > After 40

Stus-List Re: Spreader replacement

Yeah, that's a nothing burger. Just take it too someone who can weld aluminum properly. I've done that a couple times with my own. Bill Coleman On Mon, Nov 7, 2022, 03:38 Macdara Vallely via CnC-List < cnc-list@cnc-list.com> wrote: > Hi, > Anyone got any experience replaci

Stus-List Re: C&C 35 MK I 170%

My 1973 39 came with a 13 foot boom, but the original drawings were for a 15' boom, which actually looked more balanced. When I replaced the boom, I made it 14', with a large roach. Cost me 6 Seconds, and was probably worth 12! Bill Coleman Entrada, Erie PA On Thu, Nov 3, 2022 at 4:32

Stus-List Re: Keel Bolt Questions

in acid to remove the corrosion. I also had long bolts, I sawed the socket in half, and welded a piece of tubing in to extend it. Bill Coleman Entrada, Erie PA On Tue, Nov 1, 2022 at 3:51 PM James Hesketh via CnC-List < cnc-list@cnc-list.com> wrote: > My boat is a ’78 C&C 26. It’s a Flo

Stus-List Re: Engine panel button/switch replacement

glad you finally solved your problem. They can sure be frustrating, especially in tight compartments! Bill Coleman Entrada, Erie PA On Sun, Oct 30, 2022, 09:58 David Knecht via CnC-List wrote: > I think I fixed the starting problem yesterday and it is still at once > mysterious and sati

Stus-List Re: Navionics

Do you have to pay an annual subscription to keep that feature working every year? Bill Coleman Erie Pa On Fri, Oct 28, 2022, 21:51 Neil Andersen via CnC-List < cnc-list@cnc-list.com> wrote: > With Navionics that I use I can put in a final destination and have it > plot a course u

Stus-List Re: bed-it butyl tape source

ked like it had been lightly sandblasted, and after digging through all sorts of compounds, I finally found 3M glass polish. 80 bucks for a little bottle, but the results were amazing. It did take an hour and a half, but still... Not something you want to take a chance on. Bill Coleman On Tue, Oct

Stus-List Re: bed-it butyl tape source

Also, diesel will dissolve it, as well as 5200 and 4200. Bill Coleman Entrada, Erie PA On Tue, Oct 25, 2022 at 5:26 PM Dave S via CnC-List wrote: > It would be interesting to compare bed-it to other butyl tapes. I find > it doubtful that it has any special marine magic mojo that other quality

Stus-List Re: Rotella T5 - 10w30 vs 15w40?

My Yanmar 4JH3 calls for 15-40. I think most use this, Rotella. Bill Coleman On Mon, Sep 26, 2022 at 3:51 PM Dave S via CnC-List wrote: > Does it matter in any practical sense whether I use 10W-30, which is > available, versus 15 W 40, which was available last time I bought a jug… > Y

Stus-List Re: C&C 35 MK I Keel Bolts

of a grounding) Not tightening your bolts is like pouring a concrete driveway, and not putting saw cuts in it because you didn't see crack the next day. You know sooner or later you're going to get cracks. So you'd better prepare for them.. Bill Coleman On Sun, Sep 25, 2022 at 11

Stus-List Re: C&C 35 MK I Keel Bolts

g the Eye for my mainsheet attachment, and they are stuck in there for the duration! Bill Coleman Entrada, Erie PA On Tue, Sep 13, 2022 at 12:02 PM Matthew L. Wolford via CnC-List < cnc-list@cnc-list.com> wrote: > Would you recommend I Tef Gel the bolts this winter? > > Sent from

Stus-List Re: C&C 35 MK I Keel Bolts

which allows you to use a little less torque. Stainless LOVES to gall on itself, and once a nut starts to lock up, you are screwed! No Pun intended. This comment below is from the Tartan site. Bill Coleman Keelbolt Torque 6/21/02 Good morning [all]. It appears the [folks here] have been busy c

Stus-List Re: anyone try this chafe guard?

ue a piece of urethane where the chain rubs. Chain can make a mess of SS. Bill Coleman Entrada, Erie PA On Thu, Sep 8, 2022 at 12:11 PM Joe Della Barba via CnC-List < cnc-list@cnc-list.com> wrote: > https://www.nowearguard.com/ > > > > It sure looks nice. I am tempted to us

Stus-List Re: C&C Steak Rub

Look at the ingredients and make your own, using Iodized salt.. I had to get Iodized salt for my A-SALT fly shooter gun so it wouldn't gum up. Nothing like going to shoot a huge spider and have your rifle jam up! Bill Coleman Entrada, Erie PA, On Tue, Sep 6, 2022 at 4:51 PM Dennis C. vi

Stus-List Re: Fresh water pump dead?

And not to beat a dead horse, but as I mentioned B4, I had no luck with the t;ypical pumps available, and once I went with the Johnson, all my problems went away. Maybe they have a better designed check valve. Bill Coleman On Tue, Sep 6, 2022 at 3:07 PM David Knecht via CnC-List < cnc-list@

Stus-List Re: Fresh water pump dead?

Maybe you have a lot of sludge in your tank, I often put a hose on the far end of my water system and run a couple tanks out into the slip to clean it up. Bill Coleman Entrada, Erie PA On Tue, Sep 6, 2022 at 1:17 PM David Knecht via CnC-List < cnc-list@cnc-list.com> wrote: > It looks

Stus-List Re: Fresh water pump dead?

make sure it doesn't trap air in the chamber, and running continuously could be just trying to pump air. Bill Coleman Erie PA On Thu, Sep 1, 2022 at 10:40 AM David Knecht via CnC-List < cnc-list@cnc-list.com> wrote: > I am back to working on the freshwater pump problem. I replaced

Stus-List Re: Simrad Autopilot Repair

new brain, you may be happy anyways - I replaced an older Simrad with a B&G, because I was tired of trying to get things to work with a mis-mash of 0183 and 2000 - after many thousands and now all NMEA 2000 components, all of a sudden everything works wonderfully! Bill Coleman Erie, PA ENTRADA

Stus-List Re: Fresh water pump dead?

Try taking it apart and cleaning the vanes. Sometimes they get crud in there. Bill Coleman On Mon, Aug 8, 2022 at 10:24 PM David Knecht via CnC-List < cnc-list@cnc-list.com> wrote: > Hi Folks- I found that my fresh water pump was running continuously today > and not pressurizing th

Stus-List Re: [EXTERNAL] Bed-It butyl tape

> Other 'versions' that you can buy are not even close to the quality and > performance of Bed-It. I wasted money on a few. > > It is like comparing a Rolls Royce to a Ford Pinto. > Bill Coleman

Stus-List Re: [EXTERNAL] Re: Lithium Batteries

te inside that case either, it isn’t like lead-acid > where a certain capacity means a certain size. > > > > *Joe Della Barba* > > Coquina > > > > > > *From:* Bill Coleman via CnC-List > *Sent:* Wednesday, July 27, 2022 2:33 PM > *To:* Stus-Li

Stus-List Re: Lithium Batteries

These are confusing, they have a 24 V that looks similar in size to the lifeline 8D, but the 8D is 255 Ah, and the SOK 24V 100Ah LiFePO4 Battery is only 100 Ah - are they supposed to be equal, even with that disparity? Blil

Stus-List Re: [EXTERNAL] Re: No recent mail - now alternator belt

using 24V instead of putting 12V in series? Bill Coleman Entrada, Erie PA On Mon, Jul 25, 2022 at 2:13 PM Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > My battery charger does have a lithium setting, so that part is covered. > > What I don’t have is the DC-DC ch

Stus-List Re: No recent mail - now alternator belt

That's why I converted everything to serpentine! Bill Coleman Entrada Erie PA On Sun, Jul 24, 2022, 19:55 Dennis C. via CnC-List wrote: > I've finally found a Kevlar reinforced belt for my Universal 25XPB. > Haven't tried it yet. The OEM and Gates belts seem to

Stus-List Re: Sea Foam

ch is black as tar after probably 100 hours, because of the filthy air, even with a pretty good paper air filter. Thanks Bill Coleman Entrada Erie PA On Tue, Jul 19, 2022, 09:35 Robert Abbott via CnC-List < cnc-list@cnc-list.com> wrote: > I mentioned this a few weeks backmid June m

Stus-List Re: Sea Foam

g oil, as it is clean as a whistle, and not using any. I am already using FPPF 8+ Cetane Improver, and Lubricity Plus Fuel Power. And of course BioBor. If none of this works, I will try spraying water/Soap into the Turbo as the Manual suggests for carbon. Bill Coleman Entrada Erie PA On Mon, Jul 18,

Stus-List Re: Non- Gooey VHF handheld

Only problem is, now I want a newer one with with automatic rewind, and AIS! Thanks for all the suggestions. Bill Coleman Entrada Erie PA On Fri, Jul 15, 2022, 16:27 Marek Dziedzic via CnC-List < cnc-list@cnc-list.com> wrote: > Some plastics turn into a soft goo after a while. Actually,

Stus-List Re: C&C 35 Mainsheet

Josh has an amazing mainsheet setup, I thought I bookmarked it, but can't find it. I think if you are not racing a 4:1 would work, just feather up and pull. Bill Coleman Entrada, Erie PA On Fri, Jul 15, 2022 at 11:13 AM Joe Della Barba via CnC-List < cnc-list@cnc-list.com> wrote: &

Stus-List Standard Horizon VHF gone Gooey

push a button when someone is talking to me-. Bill Coleman Entrada Erie PA

Stus-List Non- Gooey VHF handheld

;t hear something clearly. Bill Coleman Entrada Erie PA >

Stus-List Re: [EXTERNAL] Re: Barient 26 winch questions

Those are pretty much generic, just find and measure one from the other winch, and order a bag from McMaster! Bill On Thu, Jul 14, 2022, 09:20 Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > > > Thanks everyone! > > I’ll just go measure the winch, I can’t seem to find that spec a

Stus-List Re: Asym Rigging and Trim

. Bill Coleman Entrada, Erie PA On Tue, Jul 12, 2022 at 6:34 PM Randy Stafford via CnC-List < cnc-list@cnc-list.com> wrote: > I have a regular crew that has been together for seven years. When we fly > the symmetrical I’m on foredeck, and probably will be with the asym too > (working i

Stus-List Re: Asym Rigging and Trim

Wow, you must really want to whoop your main competitor! I guess that's what we do - it's just boat bucks! Bill Coleman Entrada, Erie PA On Sun, Jul 10, 2022 at 9:46 PM Randy Stafford via CnC-List < cnc-list@cnc-list.com> wrote: > Listers I am appealing to your collective wi

Stus-List Re: Engine not turning over

now, but the point is that if he and other Naval Architects had owned or had to work on some of these boats early on, they might have been more user friendly! Bill Coleman Entrada Erie PA On Fri, Jul 8, 2022 at 10:20 AM Novabraid via CnC-List < cnc-list@cnc-list.com> wrote: > Marek, >

Stus-List Re: Annapolis Rigging Still in Business?

27;s lessons. As my daughter always says, life is hard. Bill Coleman Entrada Erie PA On Sat, Jun 25, 2022, 05:58 nausetbeach--- via CnC-List < cnc-list@cnc-list.com> wrote: > Does anyone in the Annapolis area know if Annapolis Rigging is still in > business? > > > > Their voic

Stus-List Re: diesel engine air filter

and a Kubota 3 cylinder diesel mower. After a few years, I noticed changing the oil, that the boat engine oil was always clean as a whistle, and the lawn mower oil was black like my old trucks used to be. Bill Coleman Entrada Erie PA On Fri, Jul 1, 2022, 20:03 schiller via CnC-List wrote: > So, n

Stus-List Re: diesel engine air filter

m egg crate material. It's probably supposed to be fire retardant, and I'm not sure. Maybe I'll try setting some on fire. Outside of the boat that is. Bill Coleman Entrada Erie PA On Sat, Jul 2, 2022, 12:09 Robert Abbott via CnC-List wrote: > Josh, > > You are absolutely

Stus-List Re: Painting hull

irted it on, tiped it with the paintbrush and Bob was my uncle indeed. And yes I happen to be in Canada at the moment. Bill Coleman Entrada Erie Pennsylvania On Fri, Jun 24, 2022, 16:05 Fred Hazzard via CnC-List wrote: > Do any of you listers have experience rolling and tipping your b

Stus-List Re: Hull number serial number identification country of manufacture

But in the good ole USA, Sales tax lives on forever . . . . Bill Colelman Erie PA , 6% ! (I know, you Canucks have it way worse!) On Thu, Jun 23, 2022 at 6:39 PM Neil Andersen via CnC-List < cnc-list@cnc-list.com> wrote: > I do know that import duties are only paid once > > Neil Andersen, W3NEA

Stus-List Re: Cost to replace UV cover

ch. The Frisbee effect! I have that now, and I don't know how to get rid of it Bill Coleman Entrada Erie PA On Wed, Jun 22, 2022, 06:31 David Swensen via CnC-List < cnc-list@cnc-list.com> wrote: > Painted UV protection? > > > https://www.google.com/amp/s/www.practical-sailor.

Stus-List Re: Genoa sheets catch on shrouds

Cool, just learned a nice new knot. And easy too, with this video - https://www.youtube.com/watch?v=n2aRj8dQPRQ Bill Coleman On Fri, Jun 17, 2022 at 9:29 AM Josh via CnC-List wrote: > Your experience sounds exactly the same as mine. The use of the Alpine > Butterfly has similar physi

Stus-List Re: Cost to replace UV cover

So, do you zip down to your sheets, and zip up to them, or do you take the sheets off altogether and just zip with one zipper? Bill Coleman Entrada Erie PA On Mon, Jun 20, 2022, 21:55 Bob Mann via CnC-List wrote: > Do away with the sacrificial altogether! I bought a jib sock for my 35

Stus-List Re: Cost to replace UV cover

Yeow! Bill Coleman On Mon, Jun 20, 2022, 21:46 Neil Andersen via CnC-List < cnc-list@cnc-list.com> wrote: > I had a “stick on” sacrificial cover attached to my 150 years ago. I was > rounding Bloody Point on the Chesapeake in fairly strong winds when the > cover got attached

Stus-List Re: Cost to replace UV cover

Maybe it's time for a SailRite machine! On the other hand, isn't there some kind of a white sticky material you can buy and just put it on yourself? It sticks like the numbers or graphics. I'm pretty sure I had that on one of my leeches. Bill Coleman Entrada Erie PA On Mon, Jun

Stus-List Re: Bilge Pumps

I replaced a rule with a johnson, I believe it was almost identical as far as th attachment, except the rotation was off just a bit. I have to say, I have tried every possible potable water pump there is, and I just discovered Johnson had a pump, I think it is variable speed Flow Master 5.0, but is

Stus-List Re: Varnish

Arlet likes Minwax, polyurethane, satin. Or glass. I used that inside . . Sea Fox, and it held up great for as long as I had it. I imagine it is still holding up great. Polyurethane is just fine inside, & it wears like iron. Bill Coleman On Sat, Jun 18, 2022, 14:10 Matthew via CnC-List w

Stus-List Re: Reefing lines

s off of roofs here as well. Sitting at the dock with the boat laying at 10° Bill Coleman Entrada Erie PA On Sat, Jun 18, 2022, 18:55 David Knecht via CnC-List wrote: > We raced today in a real blow and I was reminded to ask how others rig > their reefing lines. I have a single reef point i

Stus-List Re: air conditioner pump

and the AC Pumps are usually 120V AC, the same voltage as the units. Bill Coleman Entrada Erie PA On Tue, Jun 14, 2022 at 11:15 AM CHARLES SCHEAFFER via CnC-List < cnc-list@cnc-list.com> wrote: > Hey guys, > > I need to replace the air conditioner pump and wondered if anybody has > recommendations. > > Chuck >

Stus-List Re: Batteries again

/ Technical Support: +1 (360) 435-6100 x3 Tech Service is available Monday - Friday (8:30am - 7:30pm EST) I guess you have to do your homework! Bill Coleman Entrada, Erie, PA From: Riley Anderson

Stus-List Re: Batteries again

One of the newer chargers. I got a Pronautic 1220P for my start battery for some reason, and it has a setting on it for LiFePO4. I will send you a PDF of the manual off list. Bill Coleman Entrada, Erie, PA From: james taylor via CnC-List [mailto:cnc-list@cnc-list.com] Sent

Stus-List Re: Antenna cable woes

It certainly does not seem unreasonable for the yard to have cut it if there was no way to disconnect it, That is just common sense. But they should have taped a line onto the hidden part so you could fish another from the radio. At some point a mast is going to have to be removed. Bill

Stus-List Re: Batteries again

So Dave, would the SOK Battery 206Ah 12v LiFePO4 Battery Solar Battery be an equivalent swap-out for a Lifeline GPL-8DA 12 V 255 AH Battery? This is a little confusing (and intimidating) for the non-initiated . . Bill Coleman Entrada, Erie, PA From: Dreuge via CnC-List

Stus-List Re: Hot Water Heater.

work for myself than I accomplish. Bill Coleman Entrada, Erie, PA From: John Read via CnC-List [mailto:cnc-list@cnc-list.com] Sent: Thursday, May 26, 2022 9:47 PM To: 'Stus-List' Cc: John Read Subject: Stus-List Re: Hot Water Heater. Geez John - it never ends L John Read

Stus-List Re: knot meter not working

Have you posed this to the B&G group on Facebook? Bill Coleman On Tue, Apr 26, 2022, 07:51 Edd Schillay via CnC-List wrote: > Bob, > > Is the boat in the water? If so, pull the transducer and clean it /clear > it thoroughly. > > I didn’t have B&G, but that solu

Stus-List Vacuum Gauge replacement

us. $190 bucks, but certainly would keep you more aware of an engine shutdown. Go to Racorstore dot com, and search for AOS NMEA 2000 Vacuum Sensor Bill Coleman Entrada, Erie, PA

Stus-List Re: USCG flares vs electronic devices

them up at the store! I wonder if they are that dangerous,(no shipping) if they should be stored in an Army Surplus 50 Caliber cartridge box or something – I would hate to have something like that go off below! Bill Coleman Entrada, Erie, PA From: Rick Brass via CnC-List

Stus-List Re: Teak Handrail install

stepped on sideways when the boat is heeling, and a 10-24 machine screw can’t handle that too well. But the allure of having an O-ring seal for the ease of removing in the fall for varnishing is pretty hard to ignore. I sent you a picture of the install off list. Bill Coleman Entrada, Erie

Stus-List Re: Teak Handrail install

Yes, I did that about 15 years ago, I used brass inserts epoxied into the outside rails. Then later I did the sliding hatch cover by epoxying SS Helicoils into the teak. Bill Coleman Entrada, Erie, PA From: CHARLES SCHEAFFER via CnC-List [mailto:cnc-list@cnc-list.com] Sent

Stus-List Re: Surveyor in the Baltimore/Annapolis Area?

ter, but he was pretty good on hull tapping. Bill Coleman Entrada, Erie PA From: Rick Brass via CnC-List [mailto:cnc-list@cnc-list.com] Sent: Friday, March 18, 2022 9:21 PM To: cnc-list@cnc-list.com Cc: Rick Brass Subject: Stus-List Surveyor in the Baltimore/Annapolis Area? A client of min

Stus-List Re: 25 MKII - Smiling?

hould be reinforced, or find out why that is happening. Maybe someone had a hard grounding at some point. Bill Coleman On Fri, Mar 18, 2022, 19:31 Stephen Kidd via CnC-List wrote: > Greetings, > > I wanted to give an update on the keel wobble on our 25 MKII. It took a > while for us

Stus-List Defender, West, Sea Dog

All sold! I hate to see these things going to hedge funds and private equity. It's not the same as dealing with their founders. FortNine Acquires Defender Industries * Gary Reich * 1 hour ago 1_DEFENDER Canadian powersports com

Stus-List Re: Forward hatch gasket needed

They look like A&H, but a link to a picture, and this list will remove all doubt. Bill Coleman Entrada, Erie, PA Sent: Thursday, February 17, 2022 8:58 PM To: Stus-List Cc: Fred Hazzard Subject: Stus-List Re: Forward hatch gasket needed How can I tell the maker of the hatc

Stus-List Re: Forward hatch gasket needed

Um. I guess you give it away? Bill Coleman Entrada, Erie PA > The only downside is what you do with the 90+ feet of rubber you will have > left over after you rebuild the hatch. > > Rick Brass > Imzadi C&C 38 mk1 > la Belle Aurore C&C 25 > Washington, N

Stus-List Re: Forward hatch gasket needed

I purchased a roll of 3/8 in diameter foam from McMaster-Carr for that purpose. So, I used a few feet out of 100 ft roll, but it was way cheaper than any other option. Of course you have to find a proper adhesive. And I cannot remember what I used. Bill Coleman Entrada, Erie PA On Sat, Feb 12

Stus-List Re: Long shot: replacement C&C 36-1 anchor locker hatch/cover

uncle, and brother too. Find another 36 to borrow the lid, you could make a female pattern and make your final off that. Bill Coleman Entrada, Erie, PA From: Wyatt via CnC-List [mailto:cnc-list@cnc-list.com] Sent: Sunday, January 30, 2022 8:30 AM To: Stus-List Cc: Wyatt Subject

Stus-List Canadian Luxury Tax

xury-tax-will-have-heavy-impact-on-marine-industry/ https://www.chicagotribune.com/news/ct-xpm-1991-06-13-9102220626-story.html Bill Coleman Entrada, Erie, PA Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your s

Stus-List Re: C&C Board

NC524&trk_sid=GM9FJ62NKI8U0QBC290VN8MP30&t rk_link=RBJ21RQJH9P47EJUALCI4QGCHS&utm_source=listrak&utm_medium=email&utm_t erm=TotalBoat%20Wood%20Honey&utm_campaign=Weekly%20Feature%20-%20January%202 022&utm_content=TB%20Wood%20Honey Bill Coleman Entrada, Erie, PA

Stus-List Re: 25 MKII - Smiling?

with a TIG without getting it too hot. Just enough to keep them from rotating. Then put in back in and tighten it up to specs. Bill Coleman Entrada, Erie, PA From: dwight veinot via CnC-List [mailto:cnc-list@cnc-list.com] Sent: Monday, January 03, 2022 11:31 AM To: Stus-List Cc

Stus-List Re: C&C to race - cold weather discussion topic

Don't kid yourself-even with the longer rudder they are still amazing broachers! We've had several, including one spectacular one+ Bill Coleman Entrada, Erie PA On Sun, Dec 12, 2021, 1:19 AM Martin DeYoung via CnC-List < cnc-list@cnc-list.com> wrote: > More often than no

Stus-List Re: C&C 37/40R for sale

And the keel on it don’t look like the keel in the drawring above it. It looks eerily similar to the keel of a Beneteau 40 First. Bill Coleman Entrada, Erie, PA From: Ken Heaton via CnC-List [mailto:cnc-list@cnc-list.com] Sent: Wednesday, December 08, 2021 2:02 PM To: Stus-List

Stus-List Re: 12 volt DC power supply

This is what I use, it is sweet on many levels. https://powerwerx.com/variable-power-supply-digital-meters-30amp Bill Coleman Entrada, Erie, PA From: Dennis C. via CnC-List [mailto:cnc-list@cnc-list.com] Sent: Monday, December 06, 2021 3:39 PM To: CnClist Cc: Dennis C

Stus-List Re: [EXTERNAL] Digital Panel Meter

good. Now I think I will need the Volts Display! Thanks Joe - Bill Coleman Entrada, Erie, PA From: Della Barba, Joe via CnC-List [mailto:cnc-list@cnc-list.com] Sent: Monday, November 22, 2021 12:27 PM To: Stus-List Cc: Della Barba, Joe Subject: Stus-List Re: [EXTERNAL] Digital

Stus-List Re: Burnished bottom paint

bottom paint So a deleterious effect despite the increased WLL On Wed, Dec 1, 2021 at 5:25 PM Bill Coleman via CnC-List wrote: Found this in Sailing Anarchy – Back to the drawing board. Bulbous bows are designed to "cancel" out the hull's bow wave by inducing their own wa

Stus-List Re: Burnished bottom paint

Found this in Sailing Anarchy – Back to the drawing board. Bulbous bows are designed to "cancel" out the hull's bow wave by inducing their own wave set that has the same frequency, but opposite phase, thereby reducing wave making resistance. To make this work, the boat's speed has be withi

Stus-List Re: [EXTERNAL] Digital Panel Meter

cord on the hard. I just thought if someone had replaced a similar volt or ammeter they might have a good source. Have not had much luck on Flea Bay. Bill Coleman Entrada, Erie, PA There are tons and tons of them on Amazon and FleaBay, but matching the size is tricky. Also note

Stus-List Digital Panel Meter

Does anyone have a source for the Panel Meters, specifically a frequency meter for shore power? The manufacturer is Brighton Electronics, altho still around, They don't seem to sell retail. The Cutout hole is 2 3/8" x 15/16" ( 60 mm X 23.8). FrequencyMeter.jpg Bill Coleman

Stus-List Re: Marine Museum

Yes, but we unwashed gringos still have to provide a Covid test – O, but for the simpler days. Bill Coleman Entrada, Erie, PA From: ALAN BERGEN via CnC-List [mailto:cnc-list@cnc-list.com] Sent: Friday, November 19, 2021 2:16 PM To: C&C Cc: ALAN BERGEN Subject: Stus-List Ma

Stus-List Re: Whisker pole with a 37/40+?

I can’t believe you don’t have a topping lift – right around your upper spreader? Take a look with some binoculars. Bill Coleman Entrada, Erie, PA From: Bruce Whitmore via CnC-List [mailto:cnc-list@cnc-list.com] Sent: Thursday, November 18, 2021 5:18 PM To: Stus-List Cc: Bruce

Stus-List Re: Whisker pole with a 37/40+?

mast? I put a long Harken track on the front of my mast to store the pole, it worked great to store it and deploy it. Bill Coleman Entrada, Erie, PA From: Bruce Whitmore via CnC-List [mailto:cnc-list@cnc-list.com] Sent: Thursday, November 18, 2021 9:28 AM To: Stus-List Cc

Stus-List Re: Haul Out Question

The drum comes up with it. Pretty hard to take it apart. I bring a heavy towel or blanket, and wrap it around the drum a few times, and tape it up so it doesn't scuff the deck up Bill On Sat, Nov 13, 2021, 8:44 AM Brian Morrison via CnC-List < cnc-list@cnc-list.com> wrote: > Hello CnCers, > > I’

Stus-List Re: Wifi antenna at top of mast

http://www.wavewifi.com/ Bill On Wed, Nov 10, 2021, 6:18 AM DJ via CnC-List wrote: > Hi all, > I think someone mentioned having an antenna at the top of the mast that > helps pull in distant wifi signals. Can anyone point me in the direction > of a product that would help with picking up wifi

Stus-List Re: Source for sheaves

I have some 2” Delrin sheaves that were grooved a little deeper than I like, They are ½” Thick. With the ½” bronze bushing the axle would be 3/8” . $8.00 each + Shipping. I can send Pictures if interested. Bill Coleman Entrada, Erie, PA From: Rod Stright via CnC-List [mailto:cnc

Stus-List Re: Main halyard shackle

mostly intended to be attached to a sail ring. If you have a snap shackle on the main halyard, you may likely have a regular shackle on your headboard, which of course will work. Just lowers your main a couple inches. Not sure why you take the halyard off every time? Bill Coleman

Stus-List Re: Perry on Ball

♪ You can check out any time you like, ♫But you can never leave! ♪ From: Paul Nixon via CnCList [mailto:cnc-list@cnc-list.com] Sent: Thursday, November 04, 2021 3:24 PM To: Stus-List Cc: Paul Nixon Subject: Stus-List Re: Perry on Ball How do I get off this list? Paul Tha

Stus-List Perry on Ball

– and Perry will soon be doing some other designers. Bill Coleman Entrada, Erie, PA Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me

Stus-List Re: Poli-Glow question

I think you're right to go back to the gelcoat, but as far as temperature, if the what you're inquiring about, I would call the manufacturer, the're pretty friendly that way Bill Coleman On Sun, Oct 31, 2021, 8:27 PM CHARLES SCHEAFFER via CnC-List < cnc-list@cnc-list.com>

Stus-List Re: Bottom Paints Again

I have read that a poor man’s Prop Speed is to spray some Zinc Primer on the shaft and prop every spring. Haven’t tried it myself, but I will when my Prop Speed wears away. Bill Coleman Entrada, Erie, PA Subject: Stus-List Re: Bottom Paints Again First full season for me with my

Stus-List Re: Engine controls and Auto Pilots

rudder sensor. This helped a LOT. Bill Coleman Entrada, Erie, PA From: dwight veinot via CnC-List [mailto:cnc-list@cnc-list.com] Sent: Monday, October 25, 2021 12:31 PM To: Stus-List Cc: dwight veinot Subject: Stus-List Re: Engine controls and Auto Pilots Same for my 4000

Stus-List Re: Bottom Paints Again

Triton, Trinidad, 220, 221, whatever it takes! Yes, Triton, sorry. https://www.youtube.com/watch?v=BSoORXWLzSA Bill Coleman Entrada, Erie, PA From: David Knecht via CnC-List [mailto:cnc-list@cnc-list.com] Sent: Monday, October 25, 2021 7:59 AM To: CnC CnC discussion list Cc

Stus-List Re: Engine controls and Auto Pilots

rudder is otherwise it's just shooting in the dark. I wouldn't want to dissuade you from going to the hydraulic unit, as they are definitely superior. But I think you would be very surprised at how good it would work with the 4000 Plus and a rudder feedback. Bill Coleman On Sun, Oct 24

Stus-List Re: Engine controls and Auto Pilots

Hans, does your 4000 unit have the rudder feedback arm? Bill On Sun, Oct 24, 2021, 1:52 PM Hans Reinhardt via CnC-List < cnc-list@cnc-list.com> wrote: > Chuck, > My 1982 C&C37 came with the older Autohelm 4000 (Raymarine) autopilot. The > unit is supposedly not that different than the latest mo

Stus-List Bottom Paints Again

final haulout, and his bottom was a mess, complete with ‘spiderwebs’ and Zebra Mussels. He was amazed to see how much scum was back on 2 weeks later. I think it’s the Zinc . . . .Also, a $30 rebate going on. Bill Coleman Entrada, Erie, PA Thanks to all of the subscribers that

Stus-List Re: Engine controls and Auto Pilots

beautifully. The rudder was perfectly balanced, tho, and you could let it steer itself, and spin it with a finger. Bill Coleman Entrada, Erie, PA From: Chuck Gilchrest via CnC-List [mailto:cnc-list@cnc-list.com] Sent: Friday, October 22, 2021 4:59 PM To: Stus-List Cc: Chuck Gilchrest Subject

Stus-List Re: GelCoat Color Matching and Cracked Mast Step

you will have to pull your mast to repair this. Then I would look for softness under it t see why it cracked in the first place. Or you can make up a SS plate and not worry about the cracking.. Bill Coleman Entrada, Erie, PA From: Todd Williams via CnC-List [mailt

Stus-List Re: Freshwater pump and hose

ones, for some reason, would let air get into the system, and then they would just run without pumping anything. Very pleased with the Johnson so far. Bill Coleman Entrada, Erie PA On Sun, Oct 17, 2021, 11:49 AM Marek Dziedzic via CnC-List < cnc-list@cnc-list.com> wrote: > I would consid

Stus-List Re: Mast in and out

Those videos don’t stop. I had to reboot to get rid of them On Mon, Oct 4, 2021 at 3:23 PM Bill Coleman via CnC-List wrote: Here are a couple videos of me pulling the spar on my 39 about 18 years ago, the first one it gets dark towards the end, done with one crew and my girlfriend at the

Stus-List Re: Mast in and out

You’ll have a great time going through the canal, if you choose to go that route. I guess with a 29 you could truck it reasonably. RCR in Buffalo, across from the Cheerios Plant is a nice marina, they have a crane atop their travel lift. Bill Coleman Entrada, Erie, PA From

<    1   2   3   4   5   6   7   8   9   10   >