Re: [Elecraft] [N1MM+] K4 Transmitter Alignment

wrong reflector 73, Pete N4ZR On 5/24/2024 12:41 PM, n5xz via groups.io wrote: My new K4D does not put out 100W when power is set that way. How do I align the transmitter output? I don't see it in the manual. Allen N5XZ _._,_._,_ ---

[Elecraft] N1MM and K3

Hi all, I have been able to recover my stuck K3 at MCU LD with an old Serial to USB cable.I want to use it with my N1MM but find the transmmiting is not clean and sure it is due to the quality of that cable. Which one would you recommend to buy so my TXing will be clear and clean.? I know Elecra

[Elecraft] N1MM + winkeyer + K2

Is anyone in the group using this combination? I have a couple of config questions. Thanks in advance! Tommy W0XXX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.

Re: [Elecraft] [N1MM+] Code to Command DVK

Hi Pete, It's in the N1MM documentation. F1 CQ,{CATA1ASC SWT21;} F2 Exch,{CATA1ASC SWT31;} F3 TU,{CATA1ASC SWT35;} F4 {MYCALL},{CATA1ASC SWT39:} 73, Jim N7US From: n1mmloggerp...@groups.io On Behalf Of Pete W1RM via groups.io Sent: Saturday, March 6, 2021 13:27 To: Elecraft@mailman.qth.net;

[Elecraft] N1MM+ Logger CW reader and the K3S

I'm considering trying the CW Reader available in N1MM+ Logger, even though the K3S has that functionality. My laptop is currently connected to the USB port on the rig. According to the K3S manual, that should handle all the necessary communications between the laptop and the rig (I think). Th

Re: [Elecraft] N1MM & KX2

Since there is no RTS or DTR line into the KX2 you can't send CW or PTT that way. If you use a WinKeyer or similar you should be set. You can also send CW using the KEY macro command but you have to edit the NIMM+ .mc files to do so. GL&73, Brian, K0DTJ > On Apr 13, 2018, at 08:35, Robert 'RC'

[Elecraft] N1MM & KX2

ANY ISSUES using them together -- The Morse be with youLive Long and Prosper __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth

Re: [Elecraft] N1MM+ logger

day, March 27, 2018 10:06 AM To: elecraft@mailman.qth.net Subject: [Elecraft] N1MM+ logger Somewhere I read a "cheat sheet" page for setting up my K3S with N1MM+ Logger. I'm installing N1MM+ on a new PC and can't find the cheat sheet anymore. Does this ring a bell with anyone

[Elecraft] N1MM+ logger

Somewhere I read a "cheat sheet" page for setting up my K3S with N1MM+ Logger. I'm installing N1MM+ on a new PC and can't find the cheat sheet anymore. Does this ring a bell with anyone? Would anyone have a copy or a link they could share? 73 de Chuck, WS1L -- === Chuck Chan

Re: [Elecraft] N1MM+ & K3/K3s & Diversity

Al, Dan & Rich, Thanks guys, that indeed is the cause of the problem. I have an old hand injury that makes using the little finger on the left hand a challenge in the typing position. I started N1MM+, put the K3s in diversity and tapped the key and that dis-engaged it. Problem found so thank

Re: [Elecraft] N1MM+ & K3/K3s & Diversity

>From the N1MM+ documentation (Supported Radios page, K3/K3S section): . The stereo (grave accent - ` key, at the left end of the number keys row on many keyboards) toggles Sub on and off. It is identical to pressing the SUB radio button. To leave SUB on all the time, select Config > Sub Receiver

[Elecraft] N1MM+ & K3/K3s & Diversity

I am willing to bet that while trying to hit the ESC key in N1MM+, you accidentally or also hit the ~ key immediately below the escape key.  That will cause the symptom you described. 73, Dan __ Elecraft mailing list Home: http://mail

Re: [Elecraft] N1MM+ & K3/K3s & Diversity

e.com/When-do-I-need-atten-or-preamp-td7616174.html#a7616249 R, Al W6LX From: Gary Smith To: elecraft@mailman.qth.net Sent: Sunday, December 3, 2017 9:10 PM Subject: [Elecraft] N1MM+ & K3/K3s & Diversity I worked the ARRL 160 this last weekend,

[Elecraft] N1MM+ & K3/K3s & Diversity

I worked the ARRL 160 this last weekend, ran QRP. I had a couple technical problems that came up, one relates to the K3s. I'm asking here first if someone has experienced this. I prefer running the K3s in Diversity in the contests. I find it is more helpful to take the -3 dB loss (or whatev

Re: [Elecraft] N1MM KX2 and KX3 Issues

No I have it set to SO1V. I would really like to know what’s going on with N1MM program with the KX2 and 3 with this program. Jim K9TF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.

Re: [Elecraft] N1MM KX2 and KX3 Issues

Your problem is obviously with N1MM+, not with your elecraft rigs. It would have been more appropriate to post your message to the N1MMLoggerPlus reflector. Be that as it may, my guess would be that you are using an inappropriate N1MM Logger.ini (configuration) file, namely one that has been confi

Re: [Elecraft] N1MM KX2 and KX3 Issues

Are you using someone's config file? If so the commands for that configuration may have been introduced that way. -- View this message in context: http://elecraft.365791.n2.nabble.com/N1MM-KX2-and-KX3-Issues-tp7620853p7620860.html Sent from the Elecraft mailing list archive at Nabble.com.

[Elecraft] N1MM KX2 and KX3 Issues

When I open N1MM when it opens it is in the S&P mode and when I switch to RUN mode the Dual RX propagates its self to all the bands. This is Annoying. The ATU settings on all bands are completely changed when N1MM was opened. So this junk was also generated by N1MM. Both of these issue occur o

Re: [Elecraft] N1MM Logger +

Dauer, Edward" , elecraft@mailman.qth.net, a45wg <-unkno...@sy-edm.com> Subject: Re: [Elecraft] N1MM Logger + Why is this discussion on the Elecraft reflector and not the N1MM reflector?  Mike va3mw > On Jul 10, 2016, at 12:33 AM, Guy Olinger K2AV wrote: > > Visual Basi

Re: [Elecraft] N1MM Logger +

Why is this discussion on the Elecraft reflector and not the N1MM reflector? Mike va3mw > On Jul 10, 2016, at 12:33 AM, Guy Olinger K2AV wrote: > > Visual Basic .NET and SQLite are the essentials. > > 73, Guy K2AV > >> On Saturday, July 9, 2016, a45wg <-unkno...@sy-edm.com> wrote: >> >> Gu

Re: [Elecraft] N1MM Logger +

I disagree somewhat. Whenever I have connected new hardware to my Macs, the drivers were already there and I didn't need to find and install them as I often have needed to to on Windows. I realize this won't always be the case but it is nice when things work this way. The difficulties with L

Re: [Elecraft] N1MM Logger +

On Sat,7/9/2016 9:40 PM, Ken K6MR wrote: “I think the amateur radio community would benefit tremendously from transitioning to *n*x at some point in the future.” Until the Linux folks make the installation of new hardware as easy as it is on Windows I don’t think it will ever happen. I'm VERY

Re: [Elecraft] N1MM Logger +

phy<mailto:m...@nq6n.com> > Sent: Saturday, July 9, 2016 21:09 > To: a45wg<mailto:-unkno...@sy-edm.com> > Cc: Dauer, Edward<mailto:eda...@law.du.edu>; elecraft@mailman.qth.net > <mailto:elecraft@mailman.qth.net> > Subject: Re: [Elecraft] N1MM Logger + > > I&#

Re: [Elecraft] N1MM Logger +

to:-unkno...@sy-edm.com> Cc: Dauer, Edward<mailto:eda...@law.du.edu>; elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net> Subject: Re: [Elecraft] N1MM Logger + I'll chime in because this is something I've wondered about... N1MM+ is written in Microsoft's .NET f

Re: [Elecraft] N1MM Logger +

Visual Basic .NET and SQLite are the essentials. 73, Guy K2AV On Saturday, July 9, 2016, a45wg <-unkno...@sy-edm.com> wrote: > Guy, > Out of interest from a SW Developer point of View what is N1MM written in ? > > Tim - A45WG > > > On 9 Jul 2016, at 18:38, Guy Olinger K2AV > wrote: > > > They h

Re: [Elecraft] N1MM Logger +

I'll chime in because this is something I've wondered about... N1MM+ is written in Microsoft's .NET framework. Recently this became a cross-platform framework, and so theoretically the core functionality of N1MM could be made to run natively on Linux or OSX. However, N1MM uses a variety of libra

Re: [Elecraft] N1MM Logger +

Guy, Out of interest from a SW Developer point of View what is N1MM written in ? Tim - A45WG > On 9 Jul 2016, at 18:38, Guy Olinger K2AV wrote: > > > They have stated that to create a parallel product for Mac platforms is > beyond their intentions and resources. Having had a

Re: [Elecraft] N1MM Logger +

I’ve been using N1MM+ via a Windows 10 Virtual Box VM on my iMac.  Works pretty well, but as Bob, N7XY said, RUMlogNG works great as a native app.  That is my preferred contesting app, especially on CW.  Uses the K3S internal keyer instead of computer generated CW characters.  Sounds much cleane

Re: [Elecraft] N1MM Logger +

While probably lacking some of the features of N!MM+, RUMlogNG does a great job on contests as well as general logging, so we Mac users can avoid going to the dark side :^). Tom (DL2RUM) is continually adding new contests to the list, so one should check frequently for an updated version. Bo

Re: [Elecraft] N1MM Logger +

I use BOOTCAMP to run Win8.1 for portable use with my MacBook Pro. Works great. Sent from my iPhone ...nr4c. bill > On Jul 9, 2016, at 6:42 AM, Dauer, Edward wrote: > > Unfortunately it is still not available for Mac, and the developers seem > hesitant about using a Windows emulator on an Ap

Re: [Elecraft] N1MM Logger +

Responding to some number of comments in this and closely related threads, not just this particular poster. 1) A reminder that PLAIN N1MM is NO LONGER SUPPORTED, for two years now. Shouting intended. N1MM+ is the current and supported version. Any problem you have with the old MM, the first step

Re: [Elecraft] N1MM Logger +

I don't have any problem running under on my Mac, running winblows 7 under parallels, have been doing this for a couple of years.. for normal logging I use RumlogNG.. Regards.. Fred On 7/9/16 8:11 AM, Neil Martinsen-Burrell wrote: > On Jul 9, 2016 5:43 AM, "Dauer, Edward" wrote: >> Unfortunate

Re: [Elecraft] N1MM Logger +

On Jul 9, 2016 5:43 AM, "Dauer, Edward" wrote: > > Unfortunately it is still not available for Mac, and the developers seem hesitant about using a Windows emulator on an Apple computer. Below is a clip taken from the N1MM + website today. Does anyone have any more current info? That is still th

[Elecraft] N1MM Logger +

Unfortunately it is still not available for Mac, and the developers seem hesitant about using a Windows emulator on an Apple computer. Below is a clip taken from the N1MM + website today. Does anyone have any more current info? --- 12. Is there any chance of a cross-platform version fo

Re: [Elecraft] N1MM and KX3

For me, Field Day is how I cut my eye teeth on contesting, so I consider it a contest. But it is also so much more: Public outreach, Party, Camping trip, Emergency preparedness drill, etc. etc. etc. On the other hand, I generally don't enter contests to try to have a big score. I enter them t

Re: [Elecraft] N1MM and KX3

My query was answered, Doug...that's good 'cuz now we know the contesting s/w limits. I understand and appreciate your sideways focus on "short and sweet" for most conteststhat doesn't work well, necessarily, during, for instance, a stew perry 160 event where us qrp ops are coveted"more se

Re: [Elecraft] N1MM and KX3

Jim, I know this may be sideways to your technical issue, but for those who do S&P in a contest or FD (which is an operating event), waiting for long CQs can be frustrating. Keeping it short can increase your QSO rate and the QSO rate of those doing S&B. Here are the scenarios: CONTESTING C

Re: [Elecraft] N1MM and KX3

I missing?? 71.5 de Jim R. K9JWV From: Nr4c Sent: Sunday, June 26, 2016 5:59 PM To: Jim Rodenkirch Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] N1MM and KX3 When I got my KX3, I built a pair of transistor switches that fit in a DE-9 shell. Added

Re: [Elecraft] N1MM and KX3

When I got my KX3, I built a pair of transistor switches that fit in a DE-9 shell. Added cables for RX/TX, PTT and CW KEYING and now it works just like a K3 with CAT, PTT and CW using DTR, and RTS from n1mm all from a standard KUSB that works with the K3. Sent from my iPhone ...nr4c. bill >

Re: [Elecraft] N1MM and KX3

Bingo.mucho gracias.."problem" solved..tnx, Rich.I sure hope they expand that "buffer" some in a later firmware update/upgrade -- View this message in context: http://elecraft.365791.n2.nabble.com/N1MM-and-KX3-tp7619288p7619295.html Sent from the Elecraft mailing list a

Re: [Elecraft] N1MM and KX3

day, June 26, 2016 1:58 PM To: Jim Rodenkirch; elecraft@mailman.qth.net Subject: Re: [Elecraft] N1MM and KX3 isn't it {cat1asc...} ? From: Elecraft on behalf of Jim Rodenkirch Sent: Sunday, June 26, 2016 1:34 PM To: elecraft@mailman.qth.net Subject: [Elecra

Re: [Elecraft] N1MM and KX3

The limit is in the KX3 firmware. According to the K3&KX3 Programmer's Manual, the upper limit on the length of a text message that can be sent using the KY command is 24 characters. Your original message already comprises 24 characters after the * macros are expanded, so the added "cq " pushed it

Re: [Elecraft] N1MM and KX3

isn't it {cat1asc...} ? From: Elecraft on behalf of Jim Rodenkirch Sent: Sunday, June 26, 2016 1:34 PM To: elecraft@mailman.qth.net Subject: [Elecraft] N1MM and KX3 Here is my F1 macro for CW contests: F1 CQ, {CATA1ASCKY cq TEST * * test;} If I ente

[Elecraft] N1MM and KX3

Here is my F1 macro for CW contests: F1 CQ, {CATA1ASCKY cq TEST * * test;} If I enter two "cqs" {CATA1ASCKY cq cq TEST * * test;} the message is not sent...is that indicative of a limit on characters transferred 'tween N1MM and the KX3? Just tryin' to unnerstandtnx, in advance, for your r

Re: [Elecraft] N1MM, KX3, and KXPA100

all kinds of trouble with the tuner and PA until I updated the firmware, including a similar issue to what you described independent of N1MM Logger+.  73, Ryan AI6DO From: Michael Dinkelman via Elecraft To: "Elecraft@mailman.qth.net" Sent: Saturday, April 30, 2016 9:27 PM

Re: [Elecraft] N1MM, KX3, and KXPA100

I use N1MM+ through the KXPA100 weekly and have no issues. Check the baud rate. Should be 38,400. Make sure KX3 is selected as radio. -- View this message in context: http://elecraft.365791.n2.nabble.com/N1MM-KX3-and-KXPA100-tp7616961p7616969.html Sent from the Elecraft mailing list archive

[Elecraft] N1MM, KX3, and KXPA100

I've borrowed a KX3 and KXPA100 for the 7QP, going mobile. I plan to use N1MM for logging, keying, and frequency control. I can get N1MM to talk to the KX3. I can get N1MM to talk to the KX3 through the KXPA100 daisy chained serial connection. However, whenever I talk through to the KX3 through t

[Elecraft] N1MM CW issue

Hi, Al I have a long list of things that will clip dits, and only one of them involved the K3, and that went away nicely with the new synthesizers. El Numero Uno contest QSK problem, with nothing in second place, is QSK dealing with amplifiers that will not do T/R turn-around (including the relay

Re: [Elecraft] N1MM CW issue

I also use the WinKey USB with my K3 and it works flawlessly! Ronnie W5SUM -Original Message- From: Scott via Elecraft Sent: Friday, December 04, 2015 8:27 PM To: kevin.sto...@mediacombb.net ; elecraft@mailman.qth.net Subject: Re: [Elecraft] N1MM CW issue I did the same thing after

Re: [Elecraft] N1MM CW issue

I did the same thing after having the same problem and have to agree the WInkey USB is (so far) flawless. But I really would like to know how Tom avoids the issue directly keying the radio, especially for portable ops. Operating under W8.1 with direct keying I had about everything that co

Re: [Elecraft] N1MM CW issue

I've used a Winkey USB for about four years now. Perfect code. I don't have to worry about the PC getting busy and screwing up the CW sent with serial lines. On 12/4/2015 11:44 AM, Al Lorona wrote: Right after the CW SS I composed a message for the list, then trashed it after sleeping on it w

Re: [Elecraft] N1MM CW issue

Right after the CW SS I composed a message for the list, then trashed it after sleeping on it which I always do before posting. Now that the issue has come up on its own I wish to make an observation. During the contest I heard many stations with shortened dits. They sounded pretty bad and I re

Re: [Elecraft] N1MM CW issue

@mailman.qth.net Subject: Re: [Elecraft] N1MM CW issue I think the dits that N1MM makes are too short, at least to my ear. I set the CW weighting in N1MM 10-20% heavier and that seems to help. I never get much above 32 won but it seems fine there. The CW weight setting in the K3 menu only affects paddle input

Re: [Elecraft] N1MM CW issue

I think the dits that N1MM makes are too short, at least to my ear. I set the CW weighting in N1MM 10-20% heavier and that seems to help. I never get much above 32 won but it seems fine there. The CW weight setting in the K3 menu only affects paddle input. 73, Brian, K0DTJ > When I select a s

Re: [Elecraft] N1MM CW issue

If you have a K3 with the old synthesizer, then you will have this problem with a paddle or with N1MM, or indeed with any source of CW. One solution is to activate QRQ mode (CONFIG CW QRQ = ON). There are some limitations, such as not being able to use it with SPLIT or RIT/XIT. The better solut

[Elecraft] N1MM CW issue

Hi all, I noticed a problem with N1MM + in CW. When I select a speed higher than 28-30wpm, the weighing between points and lines changes and, at 40wpm the transmitted message becomes incomprehensible. Any suggestions? 73, Fausto IK4NMF _

Re: [Elecraft] N1MM Classic, MH MK2R+ and K3

Check the audio switching tab in Router and make sure the correct sound card (Audio Codec) is selected. Then make sure you have selected Speaker (USB Audio CODEC) as the output device in N1MM Logger. Example configurations for both N1MM Logger (classic) and N1MM Logger+ are available in the MK2

[Elecraft] N1MM Classic, MH MK2R+ and K3

This is late, but perhaps someone can provide me with a clue. I loaded a new log for the CQWWSSB and started doing check outs on my station. Everything is FB with the exception of the voice playback. All settings are the same, and have not changed since last using this combo of N1MM Classic

Re: [Elecraft] N1MM lack of instructions

N1MM is probably the MOST popular contest logger. There are 4,580 current members on the list below and you'll probably get answers there faster than here. https://groups.yahoo.com/neo/groups/N1MMLogger/info 73, Bill W4ZV -- View this message in context: http://elecraft.365791.n2.nabble.co

Re: [Elecraft] N1MM lack of instructions

Kevin, Did you look at the "Getting Started" documentation at: http://n1mm.hamdocs.com/tiki-index.php?page=N1MM+Logger+Documentation It's pretty foolproof. For specific information on interfacing with a K3 see: http://n1mm.hamdocs.com/tiki-index.php?page=Supported+Radios#K3

Re: [Elecraft] N1MM setup help

Sorry Kevin, I pressed "send" before I was quite done. In the CW keys right click on the one that reads FD-CW.mc. Download that file and save it to your N1MM directory. Now go back to the entry window, select file, open log in database, associated files, and in the CW function key filename line

Re: [Elecraft] N1MM setup help

Yes, sometimes, trial and error works the best Kevin. Setting up for field day is also very simple. First open N1MM and make sure you are at the entry window. Now click "File" at the top. Click on "new database" on the menu that opens. For a file name I would suggest "ARRL Field Day". Now click

Re: [Elecraft] N1MM setup help

Try FD. Sent from my iPhone ...nr4c. bill > On Jun 27, 2014, at 9:01 PM, Kevin wrote: > > Thank you. After I finally found this by a chance discovery you have > reaffirmed my effort. Could you please tell me which template to choose for > Field Day? >73, > Kevin. KD5ONS > >

Re: [Elecraft] N1MM setup help

Thank you. After I finally found this by a chance discovery you have reaffirmed my effort. Could you please tell me which template to choose for Field Day? 73, Kevin. KD5ONS On 6/27/2014 5:48 PM, Charles Tropp wrote: Hi Kevin, Setting up the K3 and the Winkeyer is actually p

[Elecraft] N1MM lack of instructions

I finally guessed the correct setup. No searching of N1MM's documentation helped at all. It was simply guessing which made the setup work. Since COM1 is used by the Elecraft K3 and the Winkeyer uses COM4 I thought COM1 should be set as the CW port. No, this is incorrect. It is solely the c

Re: [Elecraft] N1MM setup help

You can also use the USB port to the radio interface to key the radio directly and set up 10 user memories that will not require the K1EL keyer at all unless you want to hand key . -- View this message in context: http://elecraft.365791.n2.nabble.com/N1MM-setup-help-tp7590656p7590663.html Sent

Re: [Elecraft] N1MM setup help

Hi Kevin, Setting up the K3 and the Winkeyer is actually pretty simple. Lets assume that you have connected your K3 to your laptop on your serial port. Let's also assume that you have connected your Winkeyer and that it has passed the communication test. Now your serial port is probably Com1.

Re: [Elecraft] N1MM and K1EL Winkey

Kevin, If you have moved the USB connection from connector to connector, check your USB port assignment in Control Panel. Sometimes a different com port is assigned to USB to serial adapters unless the same USB port is used. 73, Don W3FPR On 6/27/2014 7:46 PM, Kevin wrote: Thus far I have f

[Elecraft] N1MM and K1EL Winkey

Thus far I have found a few of the problems. I needed an FT232R driver. Now the Winkey can drive the K3 just fine. N1MM on the other hand cannot seem to run the K3 at all. While the USB connection is on COM 4 the serial port between the keyer and the laptop does not work on COM 1. I am not

[Elecraft] N1MM setup help

I am using my IBM Thinkpad with an older K1EL keyer. The keyer is plugged into the back of the K3 in the keyer socket. The USB connection from the K1EL keyer is hooked to the Thinkpad. The laptop is hooked directly to the K3 via its serial port; yes, a true serial port with a DB9 connector.

Re: [Elecraft] N1MM and keying KX3. What happens to the slashes // Solved

A way to simultaneously interface a paddle and computer to the KX3 -- The KX3 has two paddle inputs - one in the front for the KXPD3 and the other on the left end. They can independently be set to either Hand or Paddles. Yes, if you want to use the front one with anything other than the KXPD3,

Re: [Elecraft] N1MM and keying KX3. What happens to the slashes // Solved

Simple two by two tenth inch plugs wired to a 3.5mm inline jack for front paddle plug. Pinout on Fred's book. Sent from my iPhone ...nr4c. bill > On May 22, 2014, at 4:29 PM, Jim Brown wrote: > >> On 5/22/2014 12:51 PM, Pete Smith N4ZR wrote: >> I understand that the KX3 does not have the K-

Re: [Elecraft] N1MM and keying KX3. What happens to the slashes // Solved

All it takes is a Y-adapter 73, Ross N4RP On 5/22/2014 4:29 PM, Jim Brown wrote: Yes, I've built several of them. The tricky part, though, is simultaneously interfacing a paddle to send fills. -- FCC Section 97.313(a) “At all times, an amateur station must use the minimum transmitter

Re: [Elecraft] N1MM and keying KX3. What happens to the slashes // Solved

On 5/22/2014 12:51 PM, Pete Smith N4ZR wrote: I understand that the KX3 does not have the K-3's built in CW and PTT interfaces on the RS-232 port, but it is really trivial to take off the DTR and RTS lines from the RS-232 cable and through a couple of one-transistor, one-resistor interfaces to

Re: [Elecraft] N1MM and keying KX3. What happens to the slashes // Solved

I understand that the KX3 does not have the K-3's built in CW and PTT interfaces on the RS-232 port, but it is really trivial to take off the DTR and RTS lines from the RS-232 cable and through a couple of one-transistor, one-resistor interfaces to the appropriate ports 73, Pete N4ZR Check out

Re: [Elecraft] N1MM and keying KX3. What happens to the slashes // Solved

On 5/22/2014 8:50 AM, Hans J Rasmusen OZ7BQ wrote: If you want to avoid the double slashes // in callsigns, you have to use the standard N1MM key commands and a Keying interface like WinKeyer USB. Does the KX3 not support CW via DTR? 73, Jim K9YC __

Re: [Elecraft] N1MM and keying KX3. What happens to the slashes // Solved

Thanks for the response. The solution is simple. N1MM appears no to support the KX3 (K2 and K3) Command Set in full. If you want to avoid the double slashes // in callsigns, you have to use the standard N1MM key commands and a Keying interface like WinKeyer USB. More to carry if you go portable,

Re: [Elecraft] N1MM and keying KX3. What happens to the slashes //

Joe, Since the call is both sent and logged without the "/", I would believe it is some condition in N1MM causing that behavior, and has nothing to do with the KX3. Check the N1MM documentation (or ask on the N1MM forum) to see if the "/" character is used as an "escape" character. If it is,

[Elecraft] N1MM and keying KX3. What happens to the slashes //

Group, Have been using the KXUSB cable to key my KX3 from the N1MM logger with the KY commands. That setup works fine, however during a recent trip as OZ7BQ/P, I discovered, that my call was send as OZ7BQP. Same thing happens when I logged a station like W1AW/0, it was logged as W1AW0. The prob

Re: [Elecraft] N1MM/K3/KX3 Programming

On Thu, Mar 20, 2014 at 7:40 PM, Doug Ellmore Sr. wrote: > Through N1MM and K3 software commands, I am able to send keying messages of > specific text from n1mm to the K3. In order to pass variables, such as the > other station and serial number, I need help to figure that out. > > winkeyer comma

Re: [Elecraft] N1MM/K3/KX3 Programming

This question would more properly have been sent to the N1MM Logger user group. Be that as it may, the answer is yes, at least in CW mode, provided you use the correct N1MM Logger command syntax (see the online documentation). With a Winkeyer or serial or parallel port CW keying, or (in the c

[Elecraft] N1MM/K3/KX3 Programming

Through N1MM and K3 software commands, I am able to send keying messages of specific text from n1mm to the K3. In order to pass variables, such as the other station and serial number, I need help to figure that out. winkeyer command example to send cq from N1MM: F1 RUN CQ,*cq {CQ MYCALL} {MYCALL

Re: [Elecraft] n1mm & k2

Robert, What port do you have N1MM and your radio talking to? Is any other software (rig control, logging, etc.) using that same port when you try to configure N1MM? Thank you and 73. --Ian Ian Kahn, KM4IK Roswell, GA EM74ua km4ik@gmail.com K3 #281, P3 #688, KPA500 #1468 HRD v5.x/6.0 Test

[Elecraft] n1mm & k2

In trying to set up my K2 using N1MM I keep getting "port config" errors and nothing seems to help. Any suggestions? -- On the 8th day. God created Amateur Radio and Baseball. NAQCC #0420 SKCC #089 FP #567 4SQRP #169 Wiol ono __ Elecraf

[Elecraft] N1MM Macro's for the KX3 Digital Voice Recorder.

With the Announcement of the new KX3 Firmware that activates the DVK. I have listed below an example of N1MM Macro's that I am using. In this example, F1 will key Memory 1 and F2 will key Memory 2. F3 will Tune the KX3 and F4 turn VOX on and off. F1 CQ,{CATA1ASC SWT11;} {CATA1ASC SWT19;} F2 Exch

Re: [Elecraft] N1MM Setup

Hello Tony, Last night I changed over from a true RS232 CAT interface to a USB to Serial port converter. I had all kinds of problems with N1MM and Logger32 not recognizing the new set-up. Then I re-booted the computer and all worked great. You didn't say what you're using for a CW interface.

[Elecraft] N1MM Setup

Although I have used it before, cannot seem to setup my K3 with N1MM so that it keys the rig - annoying - help would be appreciated. Thank you in advance. The program indicates "No CW port is setup in config". Configurer shows port 8 with checkmark in CW box - perhaps my settings in the CO

Re: [Elecraft] N1MM with K-3

Joe, Guy, Thanks for the answer. That's what I was looking for in N1MM, but missed it. Guy, there are things that some of us still feel would be an improvement for the K-3: 1. No amp keying until PTT is activated 2. Have at least the _option_ to have memories only affect the MAIN, not the

Re: [Elecraft] N1MM with K-3

Jim, in N1MM (this is an N1MM logger setting and has nothing to do with the K3), on the entry window, click "config" tab, click "configure ports", then in the configurer window, click "other" tab, put a check mark in box for "Use Reverse CW Radio 1". N1MM sets CW or CW REV based on what is in thi

Re: [Elecraft] N1MM with K-3

> While using N1MM the best answer seems to be to use a zero in the > entry window or clicking on band bottom with the bandmap. However, > this changes the CW REV to CW (using LSB tuning). In N1MM ... Configurer -> Other check user Reverse CW Radio 1. 73, ... Joe, W4TV On 12/11/2011 2:08

Re: [Elecraft] N1MM with K-3

I have found in S&P that I like the pitch to start high and come down as I tune closer. It makes it easier to hear the signal "coming". Thus, the need to be on a different side depending on if I am tuning up or down. Craig Buck On Dec 11, 2011, at 2:08 PM, Jim McCook wrote: > On a recent

[Elecraft] N1MM with K-3

On a recent post I discussed the need to use a memory to return to the bottom of a CW band without changing the SUB frequency. While using N1MM the best answer seems to be to use a zero in the entry window or clicking on band bottom with the bandmap. However, this changes the CW REV to CW (us

Re: [Elecraft] [N1MM] Re: [K3] K3 & N1MM Problem

Chyeck to make sure that you have enabled only one PTT method. This is a known problem when more than one is selected. I use Winkey PTT, and never have to worry about it. 73, Pete N4ZR The World Contest Station Database, updated daily at www.conteststations.com The Reverse Beacon Network at h

Re: [Elecraft] [N1MM] Re: [microHAM] Re: K3/ Microkeyer/N1MM lockup at FD

That confuses me - how does the Winkey chip send PTT based on data in the buffer? Is there a setting I am missing? Buck k4ia On 6/28/2011 10:56 AM, Steve London wrote: > On 06/28/2011 08:37 AM, Joe Subich, W4TV wrote: > >> I'm concerned because you indicated that the CW Keyer PTT LED was >> li

Re: [Elecraft] [N1MM] Re: [microHAM] Re: K3/ Microkeyer/N1MM lockup at FD

> N1MM Logger only sets Winkey PTT for SSB. For CW, the Winkey PTT is > set automatically by the Winkey chip, based on data in the buffer, > not by any N1MM Logger command. Interesting ... then there is still another source of PTT being set - perhaps RTS on a separate serial port. In any case, w

Re: [Elecraft] N1MM and K3 always on transmit problem

Yes. You have PTT or KEY(CW) configured wrong. maybe try to start N1MM without the K3 on. Find these settings and verify the configuration. Also check your cabling. Might try unplugging all cables and re-connecting one by one. Divide and Conquer. ...bc nr4c Quoting dbellw...@aol.com:

Re: [Elecraft] N1MM and K3 always on transmit problem

On Tue, Jan 4, 2011 at 5:21 AM, wrote: > I switched computers and now, just getting N1MM on screen causes the K3 to > transmit.  The K3 works as usual with N1MM off and vice versa.  Phone  or > CW, VOX on or off, no matter.  When N1MM and the K3 are on together, the  K3 > is in transmit. Two way

[Elecraft] N1MM and K3 always on transmit problem

I switched computers and now, just getting N1MM on screen causes the K3 to transmit. The K3 works as usual with N1MM off and vice versa. Phone or CW, VOX on or off, no matter. When N1MM and the K3 are on together, the K3 is in transmit. Any help? 73, Dave __

Re: [Elecraft] N1MM macros for KDVR

Dick, See http://www.dseven.org/ar/n1mm-kdvr3 Let me know if it still doesn't work for you ... ~Iain / N6ML On Wed, Nov 3, 2010 at 5:58 AM, Dick Frey wrote: > In last year's SSB SS, when my K3 was a month old, I used function key > macros from N1MM to > 'hit' the message memory buttons on

[Elecraft] N1MM macros for KDVR

In last year's SSB SS, when my K3 was a month old, I used function key macros from N1MM to 'hit' the message memory buttons on the panel. Each was in the form of: F1 CQ,{cat1asc swt39;} F2 Exch,{cat1asc swt35;} Now they do not work. Has something changed? Using N1MM V10.10.1 on Com 1. nothing f

  1   2   >