Adam and Christina Koch wrote:
|He was the guy who first made LSD
Wrong,
LSD (lysergic acid diethylamide) was first synthesized by the Dr. Albert
Hofmann in 1938. He worked for the Swiss pharmaceutical company Sandoz
Laboratories.
You might want to read your drug history a bit
Le Mardi 23 Avril 2002 22:07, J. Craig Woods a écrit :
Sylvestre,
I am not the poster that originally posted that Samba came without ACL
support but my question to you still stands *UN*answered. Although you
were unable or unwilling to answer the question, I asked a very simple
question:
Is their a way to restrict the amount of network and other resource
usage that a user on a remote computer can use?
Reason: I am on a lan at my college and i share 30 GB of music and 10 GB
fo software. During a typical day i can be sending 500KB/s of data. I
would rather this be around
lorne wrote:
I just found out that I won a 4 processor 200mhz pentium Pro server
with 1 gig of ram in it.We had some old equipment we are phasing out
at work and we drew straws who gets what.
Old, but more than sufficient for my playing around. I've never looked
into mult processing
J. Craig Woods wrote:
Charles A Edwards wrote:
On Tue, 23 Apr 2002 15:12:09 -0500
J. Craig Woods [EMAIL PROTECTED] wrote:
I am not the poster that originally posted that Samba came without ACL
support but my question to you still stands *UN*answered. Although you
were unable or
On Tuesday 23 April 2002 11:19 pm, you wrote:
|He was the guy who first made LSD
Wrong,
LSD (lysergic acid diethylamide) was first synthesized by the Dr. Albert
Hofmann in 1938. He worked for the Swiss pharmaceutical company Sandoz
Laboratories.
You might want to read your drug
I am using a K7T Turbo Motherboard with a Maxtor 7200 RPM Harddrive and am using
the proper ide cable. Both support ATA100/UDMA5. When I load Linux it
ackowledges this, but sets the performance to UDMA33. Playing around with hdparm
does nothing, the harddrive stays stuck at UDMA2. Does anyone
I am using a K7T Turbo Motherboard with a Maxtor 7200 RPM Harddrive and am using
the proper ide cable. Both support ATA100/UDMA5. When I load Linux it
ackowledges this, but sets the performance to UDMA33. Playing around with hdparm
does nothing, the harddrive stays stuck at UDMA2. Does anyone
On Wed, 24 Apr 2002 04:53:06 -0400 Brian York [EMAIL PROTECTED]
wrote:
Is their a way to restrict the amount of network and other resource
usage that a user on a remote computer can use?
Several:
1. http://www.chronox.de/ Uses kernel features
2. http://snad.ncsl.nist.gov/itg/nistnet/ This
hi LX
when i want to reset the permissions to *factory
settings* depending on what type of security level i
enabled during install, i run 'msec X' where X is the
security level.
as far as my tinee winee brain can remember, msec has
default settings (permissions for files, dirs,etc) for
each
On Mon, 22 Apr 2002 12:37, ngn wrote:
Hi I'm in the way of develop in Java, In order to do it I'm looking for
a good IDE of Java for Linux Mandrake
Number of options, none of which I've really used, so I can't vouch for which
is best.
JBuilder from Borland, they have a free personal
On Wednesday 24 April 2002 07:46 am, Jay wrote:
I am using a K7T Turbo Motherboard with a Maxtor 7200 RPM Harddrive and am
using the proper ide cable. Both support ATA100/UDMA5. When I load Linux it
ackowledges this, but sets the performance to UDMA33. Playing around with
hdparm does nothing,
On Wed, 2002-04-24 at 05:30, civileme wrote:
Sounds like a beastly server or multiprocessing machine or a super node
for a supercomputing cluster.
I found two Compaq Professional Workstation 5000 series at a local
Charity store which had been picked by thieves, and on the day of the
Dear experts:
I had a GIANT memory fiasco. Installed some corrupted memory (booted
fine, BIOS mem check was fine) but upon booting into the OS, the system
crashd about about 5 minutes later leaving my primary hard drive
irrepairably coss-linked both clusters and files. The good news is that
On Wed, 2002-04-24 at 09:52, Dianne Marie Montesa wrote:
hi LX
when i want to reset the permissions to *factory
settings* depending on what type of security level i
enabled during install, i run 'msec X' where X is the
security level.
as far as my tinee winee brain can remember, msec
Please see the attached file...
I have all my servers using 2 network cards. One for the public network and another
one for the private network. I'm trying to open NFS shares across the private network
only
using mandrake 8.2 initily setup on highest security. There is something blocking my
On Wednesday 24 April 2002 10:55 am, David Rankin wrote:
I will ultimately have to reformat hda which will wipe out my grub
boot loader. I need some advise on how to re-install grub after I
re-format and re-load the M$ OS on hda. I think I understand grub enough
to configure it after I
Hi all,
I mostly use my Linux system remotely via XDMCP. Does anyone know about
ways to play sound remotely over the network? I've heard of the
Network Audio System. Are there others? Has anyone been able to get
one to work? (FWIW, I've got Mandrake 8.2 and I mostly use Gnome.)
Thanks,
I reinstalled 8.1 using devfs. mpg123 gives the error:
audio: No such file or directory
I tried to add the -a /dev/sound/dsp, dsp1 with no
luck. Anyone have any ideas on this with devfs?
I made a link from /dev/sound/dsp, and dsp1, and audio with no
luck either.
Brian D. Klar - CVE
OTS
WPAFB
Hi to all !
Did somebody manage to run Star Office 6 with Mdk 8.2 ?
I installed the RPM from the 8.2 Power Pack on my installed 8.2 Download
Edition, run the installation script using an entry of the K-Menu - Office
- StarWriter.
Then, when I run a StarOffice application, nothing happens. When
On 24 Apr 2002, K Montgomery wrote:
Hi all,
I mostly use my Linux system remotely via XDMCP. Does anyone know about
ways to play sound remotely over the network? I've heard of the
Network Audio System. Are there others? Has anyone been able to get
one to work? (FWIW, I've got
I've had no luck either with the Mandrake Club downloaded version. I am
able to start all the SO applications, but they all crash when I try to
open any MS document.
There has been some talk on this on the MDK Club, it seems (to me, at
least) that the SO intallation is not too well crafted.
Anybody knows where we can find an Amanda rpm for mandrake ???
Or a manual on how to install it on mandrake ???
Thank You
Lobsang Marques
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
I mentioned this probably bug of 8.2 in the crashtesters list, but I
have the feeling that not enought attention has been given. Other
crashtesters have tryed with the same badly results.
Try to copy files from the harddrive to a floppy using konqueror. You
can do it with just a
I have several kde3 rpm packages. The last ones were downloaded today
in the ftp.kde.org following the mandrake web page recommendations.
I have observed a problem with the Spanish language; I donwloaded the
Spanish package but now the translation is not complete. For instance,
if I open
Check your /var/log/dmesg for a line (something like):
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Larry
Jay wrote:
I am using a K7T Turbo Motherboard with a Maxtor 7200 RPM Harddrive and am using
the proper
I can't use mdkupdate anymore!
It locks on ftp-linux.cc-gatech.edu !!!
It locks on 49% !!
Which file should I edit to remove it and make it work again?
I can't even install any soft from the CD's!
Using mdk8.1
TIA
Ricardo Castanho
--
Has anybody ever installed Amanda on mandrake
Does anyone knows a manual or guide for that ???
Thank You
Lobsang Marques
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello,
I recently(today) installed KDE 3.0.1. So far everything looks O.K.
except that I receive the error listed below when I close Konsole.
Also, when runnning, Konsole seems to lock up the taskbar. Here's the
error:
KDEInit could not launch 'konsole-noxft'
Any ideas?
On Wed, 24 Apr 2002 20:03:04 +0200
[EMAIL PROTECTED] wrote:
I mentioned this probably bug of 8.2 in the crashtesters list, but I
have the feeling that not enought attention has been given. Other
crashtesters have tryed with the same badly results.
Try to copy files from the harddrive
On Wed, 24 Apr 2002 11:38:33 -0700
Larry Sword [EMAIL PROTECTED] wrote:
Check your /var/log/dmesg for a line (something like):
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
That line does not denote the UDMA
On Tue, 2002-04-23 at 18:41, Leinad Jones wrote:
Hi
I've running 8.2 on my Vaio Z505S but when I try
to run Armagetron it seqfaults and SDL exits.
I've downloaded the source RPMS from SDL and
armagetron and rebuilt them but I'm looking for
suggestions on what else might be causing the
Hi There!
Once in a while, I get this 'thing' on all consoles!! It's a green D!
It does not matter what prog I call on console it keeps flashing, i.e.,
blinking!
Does anybody know about this?
Ricardo Castanho
--
==
Linux user # 102240 =
On Wed, 2002-04-24 at 05:27, Lobsang Marques wrote:
I have all my servers using 2 network cards. One for the public network and another
one for the private network. I'm trying to open NFS shares across the private
network only
using mandrake 8.2 initily setup on highest security. There is
The Mandrake 8.2 docs say I need fresh copies of /boot/System.map and
/boot/vmlinuz after completing my custom kernel and module compilation.
But what about these files?
/boot/config should I point this to a copy of the .config file I used for this
new kernel?
/boot/initrd.img under what
If I'm not plugged into the LAN, it is excruciating to wait for the eth0
initialization to fail upon boot. How can I make it go faster?
Thanks,
Phil R Lawrence
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
test
--
Michael Holt
Kirkland, WA (o_
[EMAIL PROTECTED](o_ (o_ //\
www.holt-tech.net(/)_ (/)_ V_/_www.mandrake.com
Bad or missing mouse driver. Spank the cat? (Y/N)
Want to
I've installed the amandaclient on a few workstations..
I took the srpms from redhat 7.2 and made the rpms from them.
Afterwards i needed to add amandauser to the disk group and change the group
id of the harddisks to disk and make it group readable too.
I installed the server from source
Hello,
I was wondering what was going on with this particular kernel package.
It says it's for smp but after running it and after checking out its
config file I realized that it isn't set up for smp.
On a somewhat related note. Now that the kernel is being compiled with
gcc3.0.4 is it
On Wed, 24 Apr 2002 20:07:52 +0200
[EMAIL PROTECTED] wrote:
I have several kde3 rpm packages. The last ones were downloaded today
in the ftp.kde.org following the mandrake web page recommendations.
I have observed a problem with the Spanish language; I donwloaded the
Spanish package
The kernel-secure that comes with Mandrake 8.2 is apparently SMP, maybe give
that a try in the mean time
-Jay
Quoting Victor [EMAIL PROTECTED]:
Hello,
I was wondering what was going on with this particular kernel package.
It says it's for smp but after running it and after checking
On Wed, 24 Apr 2002, Phil R Lawrence wrote:
The Mandrake 8.2 docs say I need fresh copies of /boot/System.map and
/boot/vmlinuz after completing my custom kernel and module compilation.
An incorrect System.map may give errors on boot. It *probably* (!?)
won't cause a boot failure though.
From: Vincent A. Primavera
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Date sent: 24 Apr 2002 13:46:50 +
Send reply to: [EMAIL PROTECTED]
Subject:[expert] KDE 3 and Konsole...
It's a known problem.
Look at the mandrake
Em Qua, 2002-04-24 às 16:03, Damian G escreveu:
On Wed, 24 Apr 2002 20:03:04 +0200
[EMAIL PROTECTED] wrote:
I mentioned this probably bug of 8.2 in the crashtesters list, but I
have the feeling that not enought attention has been given. Other
crashtesters have tryed with the same
Hello,
I recently(today) installed KDE 3.0.1. So far everything looks O.K.
except that I receive the error listed below when I close Konsole.
Also, when runnning, Konsole seems to lock up the taskbar. Here's the
error:
KDEInit could not launch 'konsole-noxft'
Any ideas?
On Wed, 24 Apr 2002 15:33:52 -0400 Phil R Lawrence
[EMAIL PROTECTED] wrote:
If I'm not plugged into the LAN, it is excruciating to wait for the eth0
initialization to fail upon boot. How can I make it go faster?
You should be able to fake it out with a 10*baseT loopback plug.
RJ-45:
But Damian,
1) With other filemanager doesn't happen
2) If were true, is linux an stable system
if a floppy with some errors can hung it?
Francisco Alcaraz
Murcia (Spain)
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Yes I did,
The result is similar that an spanglish ^_^ some words in Spanish,
some others in English. Finally I returned to the original kde3
packages from mandrake with some updated from texma. And it is runing
almost well.
Francisco Alcaraz
Murcia (Spain)
Want to buy your Pack
When you install a fresh copy of LM 8.2 and you set it to 'higher'
security through the installation you can get different sequrity options
for the users and for the system. When i tried this a few weeks back i
could not login directly as root (sure that was because of the
configuration) so
[EMAIL PROTECTED] wrote:
good info
Thanks!
Phil R Lawrence wrote:
If any of the above is necessary, why wasn't it mentioned in the docs?
Which docs were you referring to?
I was using
www.linux-mandrake.com/en/doc/82/en/ref.html/compiling-installing.html
Thanks,
Phil R Lawrence
Want
am i correct in seeing that you have two harddrives on ide0?
one new, one old?
the new one supports dma while the other does not?
if so, doesn't mixing dma and pio drives on the same channel require the
channel to reduce speed?
i could be wrong about this.
moose
btw, what transfer rates are
On Wed, 24 Apr 2002 16:14:44 -0300 (BRT)
Ricardo Castanho de O. Freitas [EMAIL PROTECTED] wrote:
Hi There!
Once in a while, I get this 'thing' on all consoles!! It's a green D!
It does not matter what prog I call on console it keeps flashing, i.e.,
blinking!
Does anybody know about
Charles A Edwards wrote:
On Wed, 24 Apr 2002 11:38:33 -0700
Larry Sword [EMAIL PROTECTED] wrote:
Check your /var/log/dmesg for a line (something like):
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
On Wed, Apr 24, 2002 at 05:11:54PM -0400, Brian York wrote:
When you install a fresh copy of LM 8.2 and you set it to 'higher'
security through the installation you can get different sequrity options
for the users and for the system. When i tried this a few weeks back i
could not login
I'll give that a try? Any change this could cause dammage?
-Jay
Quoting Larry Sword [EMAIL PROTECTED]:
Charles A Edwards wrote:
On Wed, 24 Apr 2002 11:38:33 -0700
Larry Sword [EMAIL PROTECTED] wrote:
Check your /var/log/dmesg for a line (something like):
Uniform
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100
Well, maybe. I've run the way for quit sometime and have experienced no
problems.
Larry
Jay wrote:
I'll give that a try? Any change this could cause dammage?
-Jay
Quoting Larry Sword [EMAIL PROTECTED]:
Charles A Edwards wrote:
On Wed, 24 Apr 2002 11:38:33 -0700
Larry Sword
I have the same problem. I have a drive capable of ATA-100 and a board
capable of ATA-66 but I get udma 2. I should get udma 3 (66).
I have those lines in my dmesg file. Now what do I do? Do I have to
play with the idebus= parameteR?
dARREN
On Thu, 2002-04-25 at 04:38, Larry Sword wrote:
Charles A Edwards wrote:
On Wed, 24 Apr 2002 11:38:33 -0700
Larry Sword [EMAIL PROTECTED] wrote:
Check your /var/log/dmesg for a line (something like):
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
That line
Darren King wrote:
I have the same problem. I have a drive capable of ATA-100 and a board
capable of ATA-66 but I get udma 2. I should get udma 3 (66).
I have those lines in my dmesg file. Now what do I do? Do I have to
play with the idebus= parameteR?
dARREN
On Thu, 2002-04-25 at 04:38,
On Wed, Apr 24, 2002 at 01:46:50PM +, Vincent A. Primavera wrote:
Hello,
I recently(today) installed KDE 3.0.1. So far everything looks O.K.
except that I receive the error listed below when I close Konsole.
Also, when runnning, Konsole seems to lock up the taskbar. Here's the
Jay wrote:
I am using a K7T Turbo Motherboard with a Maxtor 7200 RPM Harddrive and am using
the proper ide cable. Both support ATA100/UDMA5. When I load Linux it
ackowledges this, but sets the performance to UDMA33. Playing around with hdparm
does nothing, the harddrive stays stuck at UDMA2.
On Wed, 2002-04-24 at 05:04, civileme wrote:
Of course, just make an ~/rpm directory with the subdirectories /BUILD
/SOURCES /SPECS /RPMS /SRPMS, and
rpm -ivh samba-version.src.rpm
in an xterm or console AS USER.
Then look in the ~/rpm directory and you will see how it was built.
On Wed, 2002-04-24 at 12:40, Lobsang Marques wrote:
Anybody knows where we can find an Amanda rpm for mandrake ???
Or a manual on how to install it on mandrake ???
rpmfind.net has rpms for RedHat and Rawhide (RedHat equivalent of
cooker). Should just go right on a Mandrake box.
--
Brad
I have a PIII
with no OS, (with ATA33 controllers I believe), two empty HD,(10 gig ...
probably ATA33, 40 gig ATA100) and need to install Windows 98SE, RH 5.1 and
Mandrake 8.1 (Please don't ask why ...that's what I HAVE
toinstall).I have been having fits trying to get the different
factors
Brad Felmey wrote:
On Wed, 2002-04-24 at 05:04, civileme wrote:
Of course, just make an ~/rpm directory with the subdirectories /BUILD
/SOURCES /SPECS /RPMS /SRPMS, and
rpm -ivh samba-version.src.rpm
in an xterm or console AS USER.
Then look in the ~/rpm directory and you will see how it
Here's how I'd do it.
first, take out the 10 gig drive. install win 98 on
the 40 gig as the first partition (say 10gb).
second, take out the 40gb drive, and install the
10gb drive.
third, install rh 5.1 on it.
fourth, reinstall the 40 gb drive as primary
master, w/ the 10gb as primary
[Sun, 21 Apr 2002, 10:29:49 -0700 2.8K] David Guntner menulis (diedit):
% BTW, does anyone know if mod_perl only comes into play if
% your perl scrips are located there, or does mod_perl come into play no
% matter where the perl script is being executed from?
%
% --Dave
Brad Felmey wrote:
On Wed, 2002-04-24 at 05:04, civileme wrote:
Of course, just make an ~/rpm directory with the subdirectories /BUILD
/SOURCES /SPECS /RPMS /SRPMS, and
rpm -ivh samba-version.src.rpm
in an xterm or console AS USER.
Then look in the ~/rpm directory and you will see how it
At 09:01 PM 4/24/02, you wrote:
Brad Felmey wrote:
On Wed, 2002-04-24 at 05:04, civileme wrote:
Of course, just make an ~/rpm directory with the subdirectories /BUILD
/SOURCES /SPECS /RPMS /SRPMS, and
rpm -ivh samba-version.src.rpm
in an xterm or console AS USER.
Then look in the ~/rpm
hahahahaha... disappointingly easy somehow doesn't come to my mind
when it is easy. :)
Well I got it home today. My wife was most displeased. She is
threatening to send me out to the garage with all my junk. BG
It is pretty derned big! about 3 feet tall. It has 4 processors, they
all work. 1
71 matches
Mail list logo