out a table in your router somewhere that takes your device's MAC and
assigns it to the same IP address every time, you've found it under
whatever name it is.
Larry WO7R
On Mon, Feb 22, 2016 at 8:08 PM, Dave <rocke...@gmail.com> wrote:
> The easiest thing to do is use DHCP reservation in you
Com0Com works with Windows 10 you just need to use the unsigned earlier
version, not the latest release. I installed it on two machines after
moving Windows 10.
Larry
W8LIG
On Sun, Feb 21, 2016 at 1:00 PM, <flexradio-requ...@flex-radio.biz> wrote:
> Send FlexRadio mailing list su
retty cheap . I just
got an i3 on Craigs List for backup for my own Flex computing and it
upgraded to Win 10 just fine. 200 bucks. Don't know about IEEE as I now
run a 6300. But, you should be able, still, to make something like this
work.
Larry WO7R
On Thu, Feb 18, 2016 at 12:11 PM,
Excellent!
In addition, anyone interested in this should reach out to the larger
non-Flex community. As I recall, several devices (Softrock, etc.) operated
with PowerSDR as well. There are also several receive only devices out
there these days that run off of other open source SDR software. It
Problem with Com0Com solved.
Larry
W8LIG
On Thu, Dec 10, 2015 at 1:00 PM, <flexradio-requ...@flex-radio.biz> wrote:
> Send FlexRadio mailing list submissions to
> flexradio@flex-radio.biz
>
> To subscribe or unsubscribe via the World Wide Web, visit
>
> ht
Any Com0Com experts on 64bit Windows7 Pro on here. I have an installation
question.
Larry
W8LIG
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex
orts. That was also screwing my little system
up. So, maybe your system has some history that needs to be overcome.
Once I got past that problem, it all became easier.
Larry WO7R
On Sun, Nov 1, 2015 at 5:12 PM, Fred - NA2U <cw...@juno.com> wrote:
> Just got my new 6300 last T
Have a fully loaded 5k that I will ship to france, Germany, Switzerland, or
Italy. PM me if interested.
-LarryHB9EYQ
On Thu, Jun 25, 2015 at 6:55 AM -0700, Bill and Sue ope...@rcn.com wrote:
Wow, a lot of nice gadgets coming for the 6000 series radios. So my question
is, is
Use what you wish, but I have done very well with inexpensive computer
speakers. Use the type that have a headphone input that cuts off the
speakers (usually available even on the cheapest ones). I use inexpensive
headphones also. Flex allows me to equalize however I like anyway.
WO7R
On
the
major contributors (there are always groups that contribute far more than
the rest) move on.
Larry WO7R
On Thu, Mar 5, 2015 at 6:38 AM, Patrick Greenlee patric...@windstream.net
wrote:
Flex is paying attention to their customer base. many Flexers are early
adopters of technology, many
Only if you need a firmware change. Without looking at the code, this
should not ordinarily be hard. Remember, too, that the software supported
many brands of radios, including receive-only rigs like the softrocks. So,
a lot of the firmware clearly behaves like most firmware -- it does things
. If it is to happen at all, we, the 5000
owners, must supply the programming resources. I personally find that
doubtful. I know I never found the time to contribute anything.
If there is any salvation, we must look to something else.
Larry WO7R
On Mon, Mar 2, 2015 at 6:06 PM, Jay Nation n
there is not more conversation
about the 5000/3000 but I do see a few questions on the 1500. People have been
responsive and the flex staff posts there too.
-Larry
_
From: Bill and Sue ope...@rcn.com
Sent: Montag, Februar 9, 2015 12:42 vorm.
Subject: [Flexradio] response
can edit your last
post if you see you made a mistake. The flex staff post frequently when not
crushed with work.
-Larry
On Sat, Feb 7, 2015 at 9:45 PM -0800, Tom k2bew tombew...@gmail.com wrote:
There is now a online forum on the Flex website where I think most traffic
that used
- Original Message -
From: Larry Otto
To: FlexRadio Reflector
Sent: Sunday, November 30, 2014 12:53 PM
Subject: SALE
PRICE REDUCED - $1400.00 I'll still pay for shipping CONUS.
-
I have
...@embarqmail.com.
73
Larry Otto
W8LO
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
I have been getting random garbled transmit on RTTY only. Regular SSB and
RTTY seem fine.
v 2.7.2 Power SDR
4.13 VAC
I am pretty convinced this is software.
Larry WO7R
On Sun, Jul 20, 2014 at 8:47 AM, Dave Gomberg da...@sfwcf.com wrote:
Ooops, I lied. This morning the problem is back
thing, which is both primative and unnecessary.
When it's not working, WSJT looks somehow more inviting, but in the end,
all of my troubles were really with VAC setup and once you get past that,
WSJT-X is much better to work with.
Larry WO7R
On Mon, Jul 14, 2014 at 11:58 AM, Doug Vernier dvern
I'll look into the Windows side changes.
As for the assignments, I'm currently running the X version of the
program and it seems to manage the port business well. I checked this
afternoon and the setup was still correct.
Larry WO7R
On Sat, Jun 21, 2014 at 10:56 PM, David W0DHB d
the
VAC console in that mode.
All of this seems to mean is that tje JT modes don't work, which is what
I had before I set the parameters before.
How do I get past this so I can set them again?
Larry WO7R (ex WO0Z)
___
FlexRadio Systems Mailing List
a decent mike on this end, which may introduce some of the other
complexity back into things anyhow.
I presume that in many/most digital solutions, it should be all software
nowadays?
I assume I would (selectively) run Ultra VNC and like things so I can
control some of the remote (shack) items?
Larry
For sale - Flex 5000 with second receiver and internal antenna tuner.
Excellent physical and operational condition with Granit firewirecable and
origional box. Located in Basel Switzerland - will ship within Switzerland
or you can come pick it up. CHF 2500.
73
Larry
N7BCP
HB9EYQ
Hello flexers. For hams in Switzerland or nearby I've posted my Flex 3000
on ricardo.ch
http://www.ricardo.ch/kaufen/handy-festnetz-funk/funktechnik/amateurfunk/flex-radio-3000-software-defined-radio/v/an737144620/
73
Larry
N7BCP
HB9EYQ
___
FlexRadio
The one thing not 100 per cent clear is whether you can skip from version 1
to version (say) 4. I presume one can, it's the most consistent way to
read what they say, but the policy I read doesn't say so outright.
Larry WO7R
On Tue, May 13, 2014 at 7:21 AM, Patrick Greenlee
patric
will be able to leave only one or two very
low power (cell phone level) devices powered on when I am not operating;
they can run the on sequencing when I need it. The radio itself must be
power sequenced.
Larry WO7R (better known here under my former call WO0Z
power switching the Flex rigs that have heretofore been the
biggest unanswered question.
Larry WO7R
On Mon, May 12, 2014 at 1:15 PM, hmattc...@juno.com hmattc...@juno.comwrote:
Larry,
Have you checked into www.remotehams.com
I believe any rig can be set up. I have my 3000 and 1500
on coming down
from Ohio in October and staying until late November.
73
Larry - W8LIG
Hello guys,
I will stay in Sarasota FL in October/November 2014.
Are there any flexers living to meet during my vacations?
Are there any possibilities to make a cw QSO from there to DL?
That would be great!
I
Larry WO7R (ex WO0Z)
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http
Jim,
You need to send Flex your Mars license and they will provide you with the
patch and instructions on installation. The help ticket is the starting
point, don't know why your getting random characters on that. I have a Flex
5000A and did the MARS update on it with no issues.
73
Larry
for both plus shipping.
If interested, please contact me directly off list.
73
Larry KB1VFU
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail
Mike -
I had the same problem with the Data transfer program, only I tried to
install it on Win7. Tnx for the url for a separate downloand.
73
W8LO
Larry
- Original Message -
From: Michael Babineau mbabin...@magma.ca
To: flexradio@flex-radio.biz
Sent: Friday, December 20, 2013 3
Is anyone else having an issue closing PowerSDR? Since upgrading from
2.6.4, the program now hangs when I try to close it. Have to use the task
manager to close the program. I had this occasionally with 2.6.4 but not to
this degree. Happens almost every time. Using Windows7 Pro 32 bit.
73
Larry
IF 9600
Soundcard WDM
Channels Left/Right =I/Q
0 Samples
73
Larry - W8LIG
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio
to be able to run both at the same time.
CAT is working. Since I'm new to this I'm looking for suggestions.
73
Larry - W8LIG
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives
.
73
Larry - W8LIG
On Wed, Nov 6, 2013 at 4:51 PM, Ron Kolarik rkola...@neb.rr.com wrote:
Larry make sure to turn off spur reduction for CW Skimmer
to display the correct frequency.
Ron
K0IDT
- Original Message - From: Larry Bryan la...@w8lig.com
To: flexradio@flex-radio.biz
This unit was completely checked out in early 2012 at FlexRadio and has
been on the shelf since then.
All for $700 - which includes shipping and insurance to US/Canada.
Please contact me off-reflector via e-mail for more information and images
if you are interested.
73,
Larry Hammel K5OT
Tim,
I'm curious about this registry editor. Are there any instructions on it's
use before I run it and blow something up. I've not seen this before
although I've been running VAC almost 2 years now. Always looking to
optimize VAC for the 5K.
73
Larry - W8LIG
Using the COMspkr pair acquired from West Mountain Radio
73
Larry - W8LIG
On Wed, Oct 9, 2013 at 1:00 PM, flexradio-requ...@flex-radio.biz wrote:
Send FlexRadio mailing list submissions to
flexradio@flex-radio.biz
To subscribe or unsubscribe via the World Wide Web, visit
http
elsewhere!
73
Larry - W8LIG
On Fri, Aug 30, 2013 at 1:00 PM, flexradio-requ...@flex-radio.biz wrote:
Send FlexRadio mailing list submissions to
flexradio@flex-radio.biz
To subscribe or unsubscribe via the World Wide Web, visit
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex
be done
with one of K9DUR's applications?
73
Larry - W8LIG
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz
I just set up the 418 with my 1500 - simple two wire cable between the 418's 9
pin din and the flex's DB9. Key the mike and the amp keys too. Amp auto band
switches if you forget to set the band.
On Jun 21, 2013, at 16:11, Ken Alexander k.alexan...@rogers.com wrote:
Hi Jim,
You might
with elevated Administrator rights **
C:\Program Files (x86)\FlexRadio Systems\PowerSDR v2.6.4\1500 Driver64REM
uninstall new drivers
C:\Program Files (x86)\FlexRadio Systems\PowerSDR v2.6.4\1500
Driver64wdreg -inf flex1500_driver.inf -silent -log
C:\Users\larry\AppData\R
oaming\FlexRadio Systems
so will not be able to send it back to
the factory until I return - so, no radio fun ☹
-Larry
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http
future, or shoud we purchase them now before they also become
unavailable?
Not trying to be a S/A, just wondering.
73
W8LO
Larry
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex
Now Neal, a little F.U.D. never hurt anyone ! Honestly i never heard what the
Part was. Glad to know it is just the case, Even I can't hurt that one. So
I would think the accessories will be normally available for the foreseeable
future.
73
W8LO
Larry
- Original Message
Thanks everyone for your help.
For some reason I had it in my mind it was an electrical component.
Looks like we would be ok for the future. Guess I can now sell my Yaesu
Mark V.
73
W8LO
Larry
- Original Message -
From: bow...@whbowen.com
To: Jim Jannuzzo jsqu...@msn.com
Cc: Flex
not doing? I have looked at the setup in the Knowledge base article
and the only part that I can not follow is when it says to click on
transmit my audio now. I do not see where that is on the screen. Maybe
that was in version 7 and not 8?
Larry K6HLH
message but
I decided to cancel the install until I can understand the issue.
Thanks all
73s
Larry
N7BCP
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
of all trades, master of none, though often better than the master of
one.
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
Larry
da Ponte
Sent: Friday, January 4, 2013 2:52 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] When installing
tell me what I have set wrong? I can't use DM780 for CW because I
have no waterfall. As soon as I change another profile, things are back to
normal.
Using PSDR 2.4.4 Windows7 Pro 32 bit windows driver on VAC1 is WDM-KS
--
Larry
W8LIG
___
FlexRadio
. Also is there a way to
change the storage location of this PSDR audio file?
--
Larry
W8LIG
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com
, but with the RF it's
almost useless.
--
Larry
W8LIG
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz
Hello group - proud owner of a new Flex 1500 but having some install
issues. I'm running a Mac PowerBook 8gb ram, dual core, with win7 64 and
PowerSDR 2.3.5. Upon plugging in the 1500's USB port and powering on the
radio, windows 7 started searching for a driver. It found two drivers but
failed
to cancel the uninstall and uninstall vspmgr and then restart the
install - will see if I can make a contact now!
-Larry
On Fri, Jun 29, 2012 at 9:42 PM, Larry da Ponte n7bcp.la...@gmail.comwrote:
Hello group - proud owner of a new Flex 1500 but having some install
issues. I'm running a Mac
and I'm not sure the mic is working either.
Anyone out there have this similar setup that can share some information.
I'm in the final stages of transistion from the Kenwood to the FLEX and
need to get this solved.
--
Larry
W8LIG
___
FlexRadio Systems
. It
worked
real good. Picture on the ARRL web site under the Afilliated Club area of K5WPH.
I now have DDUtil to do the interfacing between N3FJP and 3K. Not much pain
in it. Some backlash from the bare bones/radios only gallery opposed to the
computer
control of anything.
73, Larry WB8LBZ, DM61
took from the
conversation at Dayton that I may only need a serial cable to the computer
and DDUtil to accomplish this. I would hope someone on this forum has gone
down this path and may be willing to assist this newbe.
--
Larry
W8LIG
___
FlexRadio Systems
: text/plain;charset=us-ascii
See in-line
-Larry
On 24.05.2012, at 08:25, paim paimg0...@btinternet.com wrote:
hello
is any one can please explain on the new flex 6700 how this will work out do
I still need to hook it to my computer ?
Yes - using standard ethernet.
dose
that I saw back when the 5000A came out.
Congratulations to the Flex bunch on the new radio. It has set a mark
that others won't hit for a long time!
-- Larry W8ER
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz
changer, allow me to quote my deceased mother, who
said, upon
picking up a switch, Don't cry until you are hurt - I would think the boys
in Austin
will do us right. See you in Dayton.
73
W8LO
Larry
- Original Message -
From: bill b...@w9ol.com
To: W6SDM Steve dd.maricopa...@gmail.com
Hello -
Should I be looking for tickets for the banquet, or will the invoice be enough
to get me in the door?
73
W8LO
Larry
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex
All,
Thanks to Dudley - WA5QPZ (direct) and Justin - KB1TFH (direct and digest)
for the help. V2.3.5 alive and working on my Flex 3000.
73, Larry WB8LBZ
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman
Hi All,
I had a hard drive fail. My only backup is 1.18.6 while the radio was
working at 2.3.5. Are there any intermediate steps or can I make one giant leap.
Sys: 4GB, Win XP Pro, AMD Quad Core
73, Larry WB8LBZ
___
FlexRadio Systems Mailing List
First let me say that I am amazed at how well the PowerSDR software
still supports the good old SDR-1000! Over the weekend I brought my 1000
out of the closet and installed PowerSDR on a fresh load of XP Pro.
Everything was loaded, along with DOT NET extensions, and all updates
done. The first
to
replace U27,the PTT IC, as I tried to drive to big of a relay once. All
is fine now. Just wondering if anyone else had a similar problem with
the mike connector?
Still a very happy owner,
Larry K6HLH
___
FlexRadio Systems Mailing List
FlexRadio@flex
I too, am a bit nervous when downloading a new version, but this one went on
without a hitch.
Swallow hard, and hit the download button. Heck, if all else fails, there
always is Neal. (o;
W8LO
Win7/F5K
Larry
- Original Message -
From: Rod Brink k...@comcast.net
To: flexradio@flex
.
73s
Larry
N7BCP
On 1/9/2012 10:00 AM, N7BCP wrote:
I have this same startup symptom too, I have a screen recording of this
happening which I'll send a link to this evening. Stop/start always fixes
this. Win 7 64bit, intel i7 with 8gb ram, PowerSDR 2.2.3, flex 5k. I don't
remember seeing
Ed - I agree 110%
Has anyone, or, would it be advantageous, to submit a request to Flex for
that type of meter?
I have no idea as to the programming it would take.
73, Happy New Year
W8LO
Larry
- Original Message -
From: Edwin Marzan edwin_mar...@hotmail.com
To: mjruttenb
(DXKeeper,) might add to the
experience? How about digital pileups? Split operation? Time from
turn-on to making the QSO? Finally, I especially would like to hear from
former Orion owners, if there are any? Thanks guys.
Larry N8KU
___
FlexRadio Systems
Brian :
Because of the US Rifle, caliber 30, M1, Sir ! - Fan noise doesn't seem to
be a problem with me.
We didn't even think about ear plugs.
73
W8LO
Larry
- Original Message -
From: Brian Lloyd brian-wb6...@lloyd.com
To: Lee Mushel herbe...@centurytel.net
Cc: flexradio@flex
would ascertain it.
$2500 shipped/insured CONUS.
Larry, W0PR
Northfield, MN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio
/insured to any address CONUS.
Happy Thanksgiving to all
Larry, W0PR
Northfield, MN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com
is
plugged into the laptop or powered on. When I search for the term
FlexControl at http://kc.flexradio.com/search.aspx I get no records found.
73s
Larry
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman
Ray, K9DUR did a nice job representing the Flex Radios at the Ft Wayne hamfest.
I am sure he wasn't bored, as he had someone there almost the whole Saturday.
W8LO
Larry
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex
.
-Larry
On 11/20/2011 8:42 PM, Larry wrote:
Following the instructions for the FlexControl found at
http://support.flexradio.com/Downloads.aspx?id=367
I pluged the new FlexControl into my Mac Powerbook Pro running windows
7 64 bit and received the message that the driver failed to install
we'll be there.
Larry
W8LO
- Original Message -
From: Ray, K9DUR k9...@rnacs.com
To: Flex-Radio E-Mail Reflector flexradio@flex-radio.biz
Sent: Thursday, November 17, 2011 12:47 PM
Subject: [Flexradio] Fort Wayne Hamfest
Well, Pam (K9JMA) I are almost packed for the Fort Wayne
with Neal Special Computer and all updates.
73
W8LO
Larry
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge
When your avocation and vocation are one in the same, Neal needs to go off
into a different direction, if for no other reason than to charge his
batteries. Burning the candle at both ends makes it last half as long.
Just my 2 cents.
73
W8LO
Larry
- Original Message -
From: Robert
in the mic, set the mic slider, and that was
about it.
Running a 5000a.
73
W8LO
Larry
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com
Thanks Rob -
Very well written.
Are Flex folks great, or what?
73
Larry
- Original Message -
From: W1AEX - Rob w1aex.f...@cox.net
To: flexradio@flex-radio.biz
Sent: Tuesday, May 10, 2011 3:16 PM
Subject: Re: [Flexradio] TX Audio Chain
Larry,
I emailed a step-by-step article
Dave is the one that had the Band.
W8LO
Larry
- Original Message -
From: Brian Lloyd brian-wb6...@lloyd.com
To: Ross Stenberg ross.stenb...@charter.net
Cc: flexradio@flex-radio.biz
Sent: Thursday, April 28, 2011 1:37 AM
Subject: Re: [Flexradio] Converting an Aviation headset for radio
Thanks to all who replied.
Quite a response !
73
W8LO
Larry
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex
Hello All -
I will be heading down to Dayton next month, and one of the top items on my
shopping list is
a good quality microphone for my F5K.
Where better to get some ideas than here?
From top to bottom, what do you guys use, what do you recommend?
Tnx
73
W8LO
Larry
Hello Dennis -
I found (On Win7) that if you have the font size greater that 100%, the
display of the Flex is distorted, on startup. Simply go to
setupappearanceSkins, and re-select the one you want. That seems to bring
back the screen to normal.
Good luck.
73
W8LO
Larry
- Original
Neal - Getting old is not any fun !!
- Original Message -
From: Neal Campbell (K3NC) abrohamn...@gmail.com
To: radio...@frontiernet.net; David Walker vk...@bigpond.com
Cc: flexradio@flex-radio.biz
Sent: Wednesday, March 30, 2011 11:48 AM
Subject: Re: [Flexradio] PSDR 2.0.22, XP skins
Flex!
73s
Larry
N7BCP
On 2/20/2011 7:57 PM, Michael Ruttenberg wrote:
Hi all
Upgraded ok here for my 3000.
Only q is about when tuning monitor is no longer enabled BT default. It was a
clean update I.e. No db migration software involved.
Mike
G7TWC
it in the panafall display. I'm not sure what that's
all about, but the switching just doesn't seem to be clean. I don't
recall it being there before I sent my 5K back for the VU upgrade, but
maybe it was there and I just missed it.
Respectfully submitted,
Larry Goga, AE5CZ
On Feb 16, 2011
Well, in NW Ohio, we have upwards to a foot of snow, and wind chill of -20
degrees F.
- Original Message -
From: Kevin Hobbs ve...@cogeco.ca
To: 'Gerald Youngblood' ger...@flexradio.com; 'Reflector'
flexradio@flex-radio.biz; flexe...@flex-radio.biz
Sent: Wednesday, February 09, 2011
Brian -
On the bright side, we don't have Hurricanes, Forest Fires, or EarthQuakes.
Gotta live somewhere.
And in a few months, this will be all gone.
73
W8LO
Larry
- Original Message -
From: Brian Lloyd
To: Larry Otto
Cc: Kevin Hobbs ; Gerald Youngblood ; Reflector ; flexe
, who kills them? Must be a higher
power (-;
- Original Message -
From: Brian Lloyd
To: Larry Otto
Cc: Kevin Hobbs ; Gerald Youngblood ; Reflector ; flexe...@flex-radio.biz
Sent: Wednesday, February 09, 2011 11:20 AM
Subject: Re: [Flexradio] [FlexEdge] Short staffed
to DIGU.
BTW, it worked while I was running v 1.18.6. Also, this version is still on the
computer. Could this be the
source of a conflict?
What am I missing?
73,
W8LO
Larry
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex
OK - Tnx - will go that route -
73
Larry
- Original Message -
From: Tim Ellison telli...@itsco.com
To: Larry Otto w...@embarqmail.com; FlexRadio Reflector
flexradio@flex-radio.biz
Sent: Tuesday, February 01, 2011 3:12 PM
Subject: RE: [Flexradio] Set up Digi
Larry,
See my
at the G5RV feed point and that cured the shack RF issue and I believe I did
not have any more issues with the 3K tuner either. I also switched to the
Granite Digital firewire cable.
-Larry
From Larry:
*Using Trunk 1.18.1 SVN 2920 and Driver 3.4.0.5254 and Flex 3K. After the
first failed attemp
year!
73,
--
Larry, W1HJF
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of WA7HYD
Sent: Friday, December 31, 2010 7:37 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] I'm a fledgling Flexer
I'm new to the lists, just
with back ground,
and doesn't increase the data screen portion.
Since we're here, anybody know how to correct it to go full screen on
startup?
73
Larry
W8LO
ps - Using a Dell 22 monitor.
- Original Message -
From: jim jb...@bellsouth.net
To: 'Bob' b...@iafrica.com; flexradio@flex
needed fire it up again,
and take the start up hit to the system? I pretty much do this on a daily
basis.
So, which is right for longevity, on or off?
Tnx
W8LO
Larry
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz
Gerald:
That pretty well says it all.
Tnx
W8LO
- Original Message -
From: Gerald Youngblood
To: Larry Royetta Otto
Cc: FlexRadio Reflector
Sent: Monday, November 29, 2010 1:38 PM
Subject: Re: [Flexradio] On or Off
I have a friend who works for Dell
I'm using an SGC 500W Power Cube with my F3K and have had no issues.
Just a single cable from the TX-OUT RCA jack on back of the F3K to the
Power Cube.
73s
Larry
N7BCP
On 11/27/10 5:42 PM, Bill wrote:
We used to say that doubling your power OUTPUT was worth 1/2 to 1 S unit.
On 11/27/2010
. If you want to run Flex Radios, and need a computer,
Neal is the one to turn to. He is good.
73
W8LO
Larry
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives
,
--
Larry, W1HJF
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Ron McKean
Sent: Thursday, October 21, 2010 6:40 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] PSDR Beta 2.10 Release to General Flex Users
The 2.10 beta has
1 - 100 of 606 matches
Mail list logo
