of
effective resolution? That still leaves us 3 bits short of the 5000A
ADC, which still means 18 dB less dynamic range.
Maybe I missed it in the PDF file, but I didn't see a dynamic range spec.
73,
Clay W7CE
On 5/18/2012 3:44 PM, Robert McGwier wrote:
Clay :
The difference is more than made up
The 5000A uses an LM4911MM for the headphone amp. It is configured as
an OCL (output capacitor-less) amp. The advantage is great
low-frequency response without the need for very large capacitors. The
disadvantage is DC on the output.
73,
Clay W7CE
On 3/15/2012 3:09 PM, Jim Barber wrote
that the processor is embedded in the K3 is irrelevant - it is still an
SDR. That said, the Flex radios offer a much nicer user interface and a
lot more potential for future upgrades. That's why I own a Flex 5000A
and a 1500, but not a K3.
73,
Clay W7CE
On 12/11/2011 9:54 AM, Robert Costa, KB6QXM
It looks nice. The price isn't bad either. Too bad it doesn't support 6M.
73,
Clay W7CE
On 11/27/2011 4:39 PM, Brian Lloyd wrote:
Someone sent me this link today. It looks like the bee's knees for the 1500.
http://www.nikkemedia.fi/juma-pa100
,
Clay W7CE
On 9/6/2011 2:28 PM, Tim Ellison, W4TME wrote:
That isn't how the TX relays operate. it isn't a sequencer.
When you press (assert) PTT, the TX relays close immediately.
If there is a time delay value set, then RF is not transmitted until
the delay time period expires.
Example:
TX
Yes. And my lab tests show that it is very accurate (better than +/- 1 dB).
73,
Clay W7CE
On 3/25/2011 9:45 PM, Tony wrote:
All,
Is the Flex 5000A S-meter calibrated to Collin standard, i.e., S-9 =
-73dbm and 6db per s-unit?
Thanks,
Tony -K2MO
W7CE
On 2/28/2011 10:01 AM, Gary Robertson wrote:
I wish you could turn on and off your external speakers and headphones
directly from the PowerSDR screen rather than having to click on the
Mixer and using its controls. I primarily use my speakers to listen to
activity on the bands. When I decide
and higher.
73,
Clay W7CE
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http
competitive price for this module from my perspective.
73,
Clay W7CE
On 2/8/2011 10:34 AM, Tim Ellison wrote:
At 60 watts on V and U, it isn't a transverter.
Having a ~100 dB dynamic RX on V and U with a ultra-low NF, yes, the price is
worth it if you are a V/U/microwave enthusiast . If you want
,
Clay W7CE
On 1/26/2011 6:52 AM, Kevin Hobbs wrote:
Hi
When listening on 144 MHz . I notice that I need to tune a little low to
make voices readable . ie: I have to listen on 144.199900 or so instead of
144.2.
Anyone else notice this?
73 Kevin
W7CE
On 1/11/2011 4:31 PM, Ed White wrote:
Hi Gang:
Have a question on the TX1, TX2, TX3 with respect to the U/V upgrade
and 2.0.16?
Before I sent the 5000A back all worked with the EME set up 1.18.6 and
WSJT 7.
and the TX1 would work with my sequencer ARRL handbook with relay's
Now
5000A. I've had it back for a
few weeks now and have used it a few times. So far, I'm really happy
with it.
73,
Clay W7CE
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex
The new DLL works here. I'm now running a 5000A and a 1500 concurrently
on an Intel I7-860/P55 machine (Asus P7P55D motherboard). Thanks!
73,
Clay W7CE
On 11/20/2010 5:39 AM, Tim (W4TME) wrote:
To all FLEX-1500 Users,
As you are probably aware, there have been some installation
running Win7 Ultimate 64-bit. Both the 5000A and 3000A work fine.
73,
Clay W7CE
On 11/13/2010 8:39 AM, Gerald Youngblood wrote:
Dear FLEX-1500 customers,
While the vast majority of FLEX-1500 owners have had no problem installing
PowerSDR(TM) v2.0.16, a small number have not been able to get
I asked this question a couple of days ago with no answer, so I'll try a
slightly different subject line and see if it gets any attention this time.
When in SPEC mode is the I/Q data stream supplied before or after the
PowerSDR noise blanker?
73,
Clay W7CE
the question again on the FlexEdge reflector.
Thanks,
Clay W7CE
On 10/27/2010 1:32 PM, FlexRadio Support, Dudley Hurry wrote:
Clay,
To be precise, in what version of PowerSDR?
For a really good answer, that is really a Eric or Bob McGwier
question and best asked on the FlexEdge, where they monitor
that Linrad
uses on on a TCP/IP port.
73,
Clay W7CE
On 10/23/2010 12:28 PM, Roger Rehr W3SZ wrote:
I got Linrad working with the Flex5000 back in 2007 and made a webpage
detailing how to do it at that time. It is really pretty simple, and
is just as Clay describes:
http://www.nitehawk.com
someone who will
share the details. I plan to get this working this winter with the
5000A and my new V/U module.
73,
Clay W7CE
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex
This is probably worth resolving with spamhaus.org.
BTW, Paul in case you didn't get the email from my gmail account, I want
two of the 2M miniverter PCBs. Thanks.
73,
Clay W7CE
On 10/7/2010 8:30 PM, Paul Wade W1GHZ wrote:
I've put together a small, low-power 2-meter Transverter to
put the Flex
at
the bottom of the email. Maybe the ARRL mail server is aggressively
searching for blacklisted domains referenced anywhere in the email.
I've sent an additional email to the ARRL postmaster for further
clarification on the issue. I'll post the results when I hear back from
him.
73,
Clay W7CE
On 10
contender. Even then, it will take a couple of years before
most computers support it. A company like FlexRadio should not even
consider USB3 before 2012.
73,
Clay W7CE
On 9/13/2010 7:10 PM, Eddie DeYoung wrote:
I just couldn't keep quiet now that a new kid has entered the fray
of connectivity
Is the service manual for the Flex 1500 available yet? If not, is there an
ETA?
73,
Clay W7CE
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http
in the PowerSDR
audio.
Your mileage may vary, but I think you'll be very happy with the performance
of a Core i7 machine running PowerSDR.
73,
Clay W7CE
- Original Message -
From: Dan Jean dml...@gmail.com
To: Flex Reflector flexradio@flex-radio.biz
Sent: Wednesday, August 18, 2010 5:26 PM
the
PowerMaster wattmeter output. The combination works well. I've even used
it while up on the tower to control my rotator from my iPhone. That was
very cool!
73,
Clay W7CE
- Original Message -
From: Mike WA8BXN hubb...@hotmail.com
To: FlexRadio@flex-radio.biz; W8HW w...@att.net
Paul,
Sign me up for one.
73,
Clay W7CE
- Original Message -
From: Paul Wade W1GHZ w1...@comcast.net
To: flexradio@flex-radio.biz
Sent: Wednesday, July 14, 2010 6:56 PM
Subject: [Flexradio] Flex 1500 on 10 GHz weak signal
got a chance to try out my new Flex 1500 on 10 GHz last
right now and I've been working some double-hop to Florida. I have a 100W
brick, but for fun just worked one FL station running 5W.
73,
Clay W7CE
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman
Thanks for the responses. As suspected, I received the wrong adapter. I
got an ADM817 and what I need is an HSTA-YM. I call Flex on Tuesday.
73,
Clay W7CE
- Original Message -
From: Alfred Green n...@cox.net
To: Clay W7CE w...@curtiss.net
Cc: flexradio@flex-radio.biz
Sent: Friday
It was the same Firewire cable that I plugged into both rigs. I've advised
the owner to return the radio for repair. Thanks for the info.
73,
Clay W7CE
- Original Message -
From: Tim Ellison telli...@itsco.com
To: Clay W7CE w...@curtiss.net; 'Reflector' FlexRadio@flex-radio.biz
?
Thanks,
Clay W7CE
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex
,
Clay W7CE
- Original Message -
From: Mark Lunday wd4...@triad.rr.com
To: flexradio@flex-radio.biz
Sent: Sunday, June 13, 2010 10:52 PM
Subject: [Flexradio] Wow, the F3K receiver is HOT on 6 meters
I have an ARR mast-mounted pre-amp, since my LMR-400 coax is a killer 300
feet
, so he
might have just been overdriving it.
73,
Clay W7CE
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex
, the Flex driver doesn't start when I power up
the 5000A. Power cycling the radio always work.
73,
Clay W7CE
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http
Many Unix/Linux Window Managers have an option that gives focus to whatever
window the mouse is pointing to, even if it is partially covered by other
windows. I find that feature handy and use it a lot. Too bad Windows
doesn't offer the same flexibility as the free software.
73,
Clay W7CE
Thanks for the info. It sounds like that would do the trick. However, I
understand that it is only available for XP and I'm running Win7 now.
73,
Clay W7CE
- Original Message -
From: FireBrick w...@billnjudy.com
To: flexradio@flex-radio.biz
Sent: Sunday, March 28, 2010 6:36 PM
and
Panadapter by about 15-30 dB, depending on the state of the RX2 preamp. The
final S-Meter reading seems independent of the RX2 preamp setting. More
importantly, the received noise level on RX2 increases to about S9+10 and S9
signals become unreadable.
73,
Clay W7CE
of the
transverters that I'm aware of require a hard T/R relay control. Am I
missing something? If not, how does Flex propose that we key our
transverters?
73,
Clay W7CE
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex
transverters without such an adapter.
Does FlexRadio plan to offer a FlexWire to PTT adapter or do I need to
design something myself?
73,
Clay W7CE
- Original Message -
From: David McKenzie k1...@vhfwiki.com
To: Clay W7CE w...@curtiss.net
Cc: Reflector FlexRadio@flex-radio.biz
Sent
interface to control it all.
73,
Clay W7CE
- Original Message -
From: Brian Lloyd brian-wb6...@lloyd.com
To: Clay W7CE w...@curtiss.net
Cc: David McKenzie k1...@vhfwiki.com; Reflector
FlexRadio@flex-radio.biz
Sent: Friday, February 12, 2010 11:58 AM
Subject: Re: [Flexradio] External
Hi Tim,
I let PowerSDR create the new database. I re-entered all of the user
settings manually. I haven't tried the K9DUR utility yet.
73,
Clay W7CE
- Original Message -
From: Tim Ellison telli...@itsco.com
To: Clay W7CE w...@curtiss.net; flexradio@flex-radio.biz
Sent: Thursday
. From the rear panel view, it looks like an additional 4 BNC
connectors could be supplied, allowing either 2 more split transverter ports
or 4 common I/F transverter ports. This would really minimize external
switching for those of us with multiple transverters.
Thanks 73,
Clay W7CE
to get audio started. Once audio is working I can reselect NR or switch
back to VHF0 and all is fine. I checked 1.18.3 and this doesn't happen in
that version.
Anyone else seeing this?
73,
Clay W7CE
___
FlexRadio Systems Mailing List
FlexRadio@flex
distinct. Other than that, will there be any
problems?
73,
Clay W7CE
- Original Message -
From: Tim (W4TME) t...@flex-radio.com
To: flexe...@flex-radio.biz; Flexradio FlexRadio@flex-radio.biz
Sent: Tuesday, February 09, 2010 7:36 PM
Subject: [FlexEdge] The FLEX-1500 to make its debut
computer remotely via the Internet or locally with WiFi, so you can run
PowerSDR remotely.
73,
Clay W7CE
- Original Message -
From: H.L. h...@sfsu.edu
To: flexradio@flex-radio.biz
Sent: Wednesday, January 27, 2010 11:15 AM
Subject: [Flexradio] iPad and Flex
Just watched
Thanks for the update Greg. Going to separate VHF/UHF connectors is an
excellent idea and will make my intended use of the VU-Module easier. I
have no problem waiting for the upgrade until you guys are satisfied that
you have it right.
73,
Clay W7CE
- Original Message -
From
High223.39/High
Name1.25M Repeater Inputs/Name
TXtrue/TX
/BandText
73,
Clay W7CE
- Original Message -
From: K9DUR k9...@rnacs.com
To: 'Clay W7CE' w...@curtiss.net; FlexRadio@flex-radio.biz
Sent: Sunday, January 03, 2010 5:54 AM
Subject: RE: [Flexradio] 222 MHz transverter
to 225 MHz, then I
get the OOB warnings I listed earlier. I assume that the firmware must have
a bug and is incorrectly reporting OOB for 222.250 to 223.400 MHz. I think
it should be reporting 1.25M Repeater Inputs instead of OOB.
73,
Clay W7CE
- Original Message -
From: Tim Ellison
band. Supporting a full 4 MHz
bandwidth on that interface makes sense though since the power level is only
0 dBm and some of the common transverter bands are greater than 1.7 MHz
wide.
73,
Clay W7CE
- Original Message -
From: Ray J r...@w9ray.org
To: FlexRadio@flex-radio.biz
Sent
in HF mode, even though the
frequency is correct.
Has anyone else noticed either of these behaviors, or am I doing something
wrong?
73,
Clay W7CE
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman
with 1.18.3? Is anyone
else observing this?
73,
Clay W7CE
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz
I should have mentioned the RX2 is connected to the RX1 tap.
- Original Message -
From: Clay W7CE w...@curtiss.net
To: flexradio@flex-radio.biz
Sent: Sunday, December 20, 2009 12:59 PM
Subject: [Flexradio] 5000A RX1 Preamp affects RX2
I recently installed PowerSDR 1.18.3 on a new
I'll try running the calibration later today. Would that explain why the
RX1 preamp has any impact on RX2? Shouldn't the two receivers be fully
independent?
73,
Clay W7CE
- Original Message -
From: Tim Ellison telli...@itsco.com
To: Clay W7CE w...@curtiss.net; flexradio@flex
, when I ran the RX2 full calibration, the 6M filter test
failed with the following values: (10.9, 9.4, 1.6). Is there anything I can
do locally about this, or will it need to be checked out at the factory?
73,
Clay W7CE
- Original Message -
From: Tim Ellison telli...@itsco.com
, then PowerSDR remembers the RX1 mode
everytime, so it appears that PowerSDR is only having trouble remembering
the mode for each of the RX2 bands.
73,
Clay W7CE
- Original Message -
From: Dudley Hurry jhu...@austin.rr.com
To: Clay W7CE w...@curtiss.net
Cc: flexradio@flex-radio.biz
be a couple hundred dollars
cheaper, but it is what it is. My order is already placed.
73,
Clay W7CE
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http
to think that could happen even without operator
error.
Do I correctly understand the drawings and configuration options when using
the VU antenna switch?
73,
Clay W7CE
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex
thinking about buying
a Mac so that I can start working on the iPhone app.
73,
Clay W7CE
- Original Message -
From: W5CUL w5...@sbcglobal.net
To: flexradio@flex-radio.biz
Sent: Saturday, October 17, 2009 4:10 PM
Subject: Re: [Flexradio] iphone sdr
Maybe not knobs, but find or develop
W7CE
- Original Message -
From: Stu Phillips s...@ridgelift.com
To: flexradio@flex-radio.biz
Sent: Monday, October 05, 2009 11:58 AM
Subject: [Flexradio] Flex 5000 and Amp (SPE 1K or ACOM 2000)???
This weekend's experience in the Cal QSO party has got me considering
adding an amplifier
a
better radio next time.
73,
Clay W7CE
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base
,
1.3.0.06 and 3.4.0.5254, respectively). I was also seeing this on PowerSDR
1.18.1.
73,
Clay W7CE
- Original Message -
From: dick kalt w1...@optonline.net
To: flexradio@flex-radio.biz
Sent: Wednesday, August 12, 2009 5:14 PM
Subject: [Flexradio] Power meter reading
For some time
of operation,
so I needed to be sure that everything would go smoothly. There's nothing
like the panic you feel when a radio breaks just before a contest.
Thanks 73,
Clay W7CE
Clay,
I want to apologize publicly for the confusion on this. We are feeling
our
way a bit as we transition to the new
opens you may hear me.
73,
Clay W7CE
CN87oa
Lacey, WA
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz
. There seems to
be a disagreement between you and Flex-Radio web page. It's a simple
question. Is 1.3.0.6 really the latest release, or is your statement
correct? This question seems very pertinent to this reflector since it
pertains to the state of release software.
73,
Clay W7CE
it and
once installed can I go back to 1.3.0.0 if I need to?
73,
Clay W7CE
- Original Message -
From: Tim Ellison telli...@itsco.com
To: y...@aol.com; FlexRadio@flex-radio.biz
Sent: Tuesday, July 14, 2009 3:16 PM
Subject: Re: [Flexradio] firmware update
1.) The HRFIO board has nothing
an amp and you improve both your RX and TX signal
strength at the same time. If you have the room, go for a 7 element or
larger beam. You'll be amazed at how much more you hear with the longer
antenna, and you can't work them if you can't hear them.
73,
Clay W7CE
- Original Message
to be quick and
easy to use so you can maximize the number of contacts without spending
time looking for hidden windows.
73,
Clay W7CE
- Original Message -
From: Kevin Hobbs ve...@cogeco.ca
To: FlexRadio@flex-radio.biz
Sent: Monday, June 22, 2009 6:10 PM
Subject: [Flexradio] Antenna Selection
box) so
that the S-Meter will read correctly? If not, I'll add it to the feature
request list.
I'm running PowerSDR 1.18.1 and Driver 3.4.0.5254.
73,
Clay W7CE
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz
works. I've copied Q5 signals that were 4 S-units below the
power-line noise.
Don't let this one thing stop you from getting a really great radio. I
don't think you'll ever regret it.
73,
Clay W7CE
- Original Message -
From: Dennis Petrich radio...@frontiernet.net
To: Ed Helms n4z
noise figure. Their measured 10 db (S+N)/N, 1 kHz, 30% modulation
sensitivity was 3.7 uV, and for 12 dB SINAD it was 1.4 uV.
73,
Clay W7CE
- Original Message -
From: Dan Eisenman k8...@allprophoto.net
To: Clay W7CE w...@curtiss.net
Cc: flexradio@flex-radio.biz
Sent: Monday, June 22
Does .NET 3.5 SP 1 work with PowerSDR 1.16.1? I'm going to upgrade to the
latest PowerSDR release also, but want to know if 1.16.1 will still work in
case I have any PowerSDR upgrade problems.
Thanks,
Clay W7CE
___
FlexRadio Systems Mailing
(more
when local QRN is minimum). I'm still experimenting with the best
attenuator setting, but I'd say you want at least 16-20 dB of gain.
I own five 6 Meter rigs, and the 5000A is the best by far since I added the
preamp.
73,
Clay W7CE
- Original Message -
From: Dan Eisenman k8
shots
I've seen there may be some low contrast color combinations that are hard
for me to read. After eight eye surgeries, my vision is actually quite
good, but I don't do well with some color combinations now.
73,
Clay W7CE
- Original Message -
From: Jim R rizzo...@hotmail.com
, but once you add the
preamp, you'll find the RX performance is great. I used my 5000 all weekend
on 6M and am very happy with the overal performance.
73,
Clay W7CE
- Original Message -
From: MILLER, Tom tmil...@swbno.org
To: flexradio@flex-radio.biz
Sent: Sunday, June 14, 2009 9:40 PM
upgraded from 5el to 7el to 9el
running legal limit. WARNING: 6M is addictive!
73,
Clay W7CE
- Original Message -
From: FireBrick w...@billnjudy.com
To: FlexRadio List flexradio@flex-radio.biz
Sent: Monday, June 08, 2009 10:14 AM
Subject: [Flexradio] question about cabeling a 6 meter
.
I don't observe this behavior on the other bands. It is repeatable every
time on 6M and always lasts for about 5.5 seconds. Anyone have an idea
what's causing this?
BTW, I'm running PowerSDR 1.16.1, with Flex Driver 3.2.0 build 1556.
73,
Clay W7CE
down the root cause.
73,
Clay W7CE
- Original Message -
From: Mike - KM0T scsue...@mtcnet.net
To: FlexRadio@flex-radio.biz
Sent: Friday, June 05, 2009 6:19 PM
Subject: Re: [Flexradio] Increased receive noise level on 6M after
CWTransmit
For whatever its worth, I have noticed
Laptop using the built-in Firewire adapter, so it's not exactly at the high
power end of the computing spectrum.
73,
Clay W7CE
- Original Message -
From: Eric Wachsmann e...@flex-radio.com
To: Clay W7CE w...@curtiss.net
Cc: flexra...@flex-radio. Biz flexradio@flex-radio.biz
Sent: Friday
of
Firewire-compatible devices available on the market, I doubt if that will
ever change.
73,
Clay W7CE
- Original Message -
From: Tim Ellison telli...@itsco.com
To: Clay W7CE w...@curtiss.net; flexra...@flex-radio. Biz
flexradio@flex-radio.biz
Sent: Saturday, May 23, 2009 6:53 AM
Subject
I'm confused. I can click and drag the panadapter for the full width of
my computer screen (even outside the PowerSDR window once I start dragging)
regardless of the Spur Reduction setting. What am I missing here?
73,
Clay W7CE
- Original Message -
From: NZ8J n...@woh.rr.com
frequency. If that's the case then why did you ask him if Spur Reduction is
off? Exactly what is the limitation when Spur Reduction is off that Tim was
experiencing in the original question?
73,
Clay W7CE
- Original Message -
From: Tim Ellison telli...@itsco.com
To: Clay W7CE w
Reduction button.
73,
Clay W7CE
- Original Message -
From: Tim Ellison telli...@itsco.com
To: Clay W7CE w...@curtiss.net; flexra...@flex-radio. Biz
flexradio@flex-radio.biz
Sent: Friday, May 22, 2009 7:15 PM
Subject: RE: [SPAM] Re: [Flexradio] [SPAM] Re: [SPAM] Frequency change
In the Transmit tab of the Setup form there is an AM carrier level setting.
I haven't tried it yet, but I suspect it will allow you to do DSB with
minimal carrier.
73,
Clay W7CE
- Original Message -
From: Tim Ellison telli...@itsco.com
To: Joe Roth w...@live.com; Flex Radio
of no easy way to connect a 6M preamp to RX2, but may eventually bite
the bullet and install my own external relays. That way I can be monitoring
50.125 while operating HF on RX1.
73,
Clay W7CE
- Original Message -
From: Tim Ellison telli...@itsco.com
To: vtnn...@comcast.net; Flex Radio
this close to the theoretical noise floor of -147 dBm for a
500 Hz bandwidth receiver.
73,
Clay W7CE
- Original Message -
From: Eric Wachsmann
To: Clay W7CE
Cc: Bob McGwier ; flexradio@flex-radio.biz
Sent: Wednesday, April 15, 2009 9:08 AM
Subject: Re: [Flexradio] PowerSDR S
how close to
the noise floor I could get and still have agreement, but it was down to
less than 10 dB above the noise.
Clay
- Original Message -
From: Bob McGwier rwmcgw...@gmail.com
To: Clay W7CE w...@curtiss.net
Cc: flexradio@flex-radio.biz
Sent: Wednesday, April 15, 2009 9:08 PM
on measurements that I've made from -100 dBm
to -30 dBm.
73,
Clay W7CE
You are not reading this correctly.
The power displayed on the meter is integrated power in the receive
filter, just as it should be. The computation is accurate to much more
than 0.1 dB irrespective of what the display is doing
See comments below.
Clay W7CE
This also gets back to click-tuning. To me click-tuning is perhaps the
most awkward feature of PowerSDR. Our brains expect things to stay in
place and not jump from one place to another. Right now when I use
click-tuning the entire display jumps to center
Hi Eric,
Yes. All measurements were made using antenna port 1.
73,
Clay W7CE
- Original Message -
From: Eric Wachsmann
To: Clay W7CE
Cc: Bob McGwier ; flexradio@flex-radio.biz
Sent: Tuesday, April 14, 2009 8:56 AM
Subject: Re: [Flexradio] PowerSDR S-Meter Power Readings
it if one of the PowerSDR gurus could help point me in the
correct direction in the source code. I think I've found most of the code,
but I'm not sure where the average signal is computed.
Thanks 73,
Clay W7CE
___
FlexRadio Systems Mailing List
.
73,
Clay W7CE
- Original Message -
From: Kevin Hobbs ve...@cogeco.ca
To: flexradio@flex-radio.biz
Sent: Saturday, March 14, 2009 6:02 AM
Subject: Re: [Flexradio] 5000A 6 meter MDS/NF
Hi Clay
Thanks for the tests ... very interesting to me as I now primarily stick
to
6m. I use
the South Cook
Islands.
I have my order in for the Flex-1500 and hope that more 6M gain is provided
on it. It won't be as convenient to use an external preamp with that radio
and on 6M an extra 20 dB of front end gain will make a huge difference in
performance.
73,
Clay W7CE
noise
floor. SW bug?
73,
Clay W7CE
- Original Message -
From: Tim Ellison telli...@itsco.com
To: Mark Mumaw n...@esedona.net; FlexRadio reflector
flexradio@flex-radio.biz
Sent: Wednesday, March 11, 2009 12:48 PM
Subject: Re: [Flexradio] [SPAM] Help - RX2 Noise floor test
You need
Why does it matter? If he enjoys it and wants to do it, then he needs no
other reason. I know of no requirement that he provide you with
justification for his preferences. Personally, I can't stand football. I
don't see that it serves any purpose and the scores seem completely
meaningless
sufficient
info to determine if it will meet my needs.
73,
Clay W7CE
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex
.
Are there any plans to offer a diplexer so that two separate antennas and/or
amps can be connected simultaneously?
73,
Clay W7CE
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
with my Flex 5000A, but the Firewire interface seems to be
the source of most problems that I see.
73,
Clay W7CE
Thinking about the Flex-3000 as a portable radio.
Wish it had a USB option with Firewire - User choice which to use.
Still , it will be nice to have one with my Flex-5000
You don't really need special software to switch quickly between windows.
You can use Alt-Tab to toggle between two applications in Windows. Since
it only requires the left hand to switch windows you can have your right
hand on the mouse while you do so.
- Original Message -
From:
it with a
SoftRock receiver with no problems.
Any ideas?
Thanks,
Clay W7CE
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex
the 5000A up and running.
Suggestions or comments anyone?
73,
Clay W7CE
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio
,
Clay
- Original Message -
From: Tim Ellison telli...@itsco.com
To: W7CE w...@curtiss.net; flexradio@flex-radio.biz
Sent: Wednesday, January 14, 2009 6:56 AM
Subject: RE: [Flexradio] 6M Preamp
Clay,
I looked at both of those preamps too. I eventually decided on a Down East
Microwave
controller), or will I need to add an ExpressCard adapter for good results?
Thanks 73,
Clay W7CE
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http
1 - 100 of 104 matches
Mail list logo