[Flexradio] flex radio

I just had a fascinating thought about Flex Radio, Your input might be of help. I just bought the Hercules DJ console and with the help of Neil I am going to put it into the flex program. Now, I have a friend who would love to have a flex 3000 but he is blind. The way I see it is that he cou

[Flexradio] Flex radio

___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz

[Flexradio] Flex Radio

Hi Folks. I love the Flex 3000 especially since I am an “AMer.” My question is this since I have been reading all the recent posts. When you say you have 2mtrs and 440 etc. What do you mean by that. Can you actually get into repeaters or do you do simplex and SSB. Also, what is the added

[Flexradio] Flex radio app

All, Even if you could port over powersdr to a android or a iwhatever, wouldn't the latency from and to the cell tower be too great to be an effective application? 4g throughout would be preferred over the legacy 3g network, but I would like to know if the latency to the towers and back make t

Re: [Flexradio] flex radio

I would suggest that you get yours running and then you will be able to talk your friend through a checkout. If your friend lives close enough, bring him over to try yours to see how he likes it before he buys one of his own. I have more than twenty years' experience assisting a blind ham budd

Re: [Flexradio] flex radio

Bill, If your friend likes it, I have a brand new DJ Controller that I had planned to use with another radio but never got around to it. He is welcome to it if he likes your setup. 73 Greg AB7R On Fri, Mar 7, 2014 at 5:54 AM, William and Susan wrote: > I just had a fascinating thought about

Re: [Flexradio] Flex Radio

AM To: flexradio@flex-radio.biz<mailto:flexradio@flex-radio.biz> Subject: [Flexradio] Flex Radio Hi Folks. I love the Flex 3000 especially since I am an “AMer.” My question is this since I have been reading all the recent posts. When you say you have 2mtrs and 440 etc. What do you mean by

Re: [Flexradio] Flex Radio

ilto:ope...@rcn.com> > Sent: ‎3/‎2/‎2015 11:00 AM > To: flexradio@flex-radio.biz<mailto:flexradio@flex-radio.biz> > Subject: [Flexradio] Flex Radio > > Hi Folks. > I love the Flex 3000 especially since I am an “AMer.” My question is this > since I have been reading

[Flexradio] Flex Radio Exciting

WoW ! Check out this web sites. http://www.cqdx.it/woodbox/wbr-home-ita.html http://www.cqdx.it/woodbox/news_ita.html 73's , Bruce KL7JDR Bruce W. Mills P.O. Box 1500 31490 Echo Lake Road Soldotna , Alaska 99669 (907)262-4373 kl7...@alaska.net

[Flexradio] Flex radio help

Hi name Larry I live in Prunedale California just north of Salinas. I'm looking for someone that lives near here to give me some help . Larry KE6PPE _ke6...@aol.com_ (mailto:ke6...@aol.com) ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.b

[Flexradio] FLEX RADIO SUPPORT

this is NOT monies donated it is about support the product software and hard wear this it will be good to pay member ship on the web of FLEXRADIO in order to support later development and like to be a member of the ARRL . SO PLEASE Gerlad can set it then in the web of FLEXRADIO I HOPE WE

[Flexradio] Flex Radio Net

Is there another Flex Radio net other than he one that is on 14.329 MHZ ? The band propagation for this band at times is unworkable for me. Wondering if there is something along the 40 or 75 meter band. My Grid Square is FN22 Thanks KB2RSK ___ F

[Flexradio] Flex Radio Issues

I must be one of those oddballs (No Comment Stu) that installed the new firmware and OS files. I've had absolutely no problems. It's all working great. I must be missing something!! Kirk, K6KAR Niceville, FL ___ FlexRadio Systems Mailing List Fl

[Flexradio] Flex Radio Reflector question

I've noticed that if I send a submission to this list from home, all works just fine. If I access the same e-mail account via Verizon's web mail portal the posting is not received. What's strange is that it doesn't bounce back. Since I'm often on the road, this makes it impossible to post or res

Re: [Flexradio] [Flex radio] MultiRX

Your right of course Bill. After the HK0 quit, I thought about it some more on my end and came to your conclusion. I should have used the old brain before putting the post on the reflector. 73s Jim K4JAF -Original Message- From: Ray, K9DUR Sent: Tuesday, January 10, 2012 5:24 AM T

Re: [Flexradio] [Flex radio] MultiRX

Don't worry about it, Jim. For years I had a sign on my office wall to remind me: CAUTION! BE SURE BRAIN IS ENGAGED BEFORE PUTTING MOUTH INTO GEAR. Alas, it didn't help much. On 1/10/12, Jim Cox wrote: > Your right of course Bill. After the HK0 quit, I thought about it some more > on my en

[Flexradio] Flex Radio on MAC

I have run a Flex 1500 on a MacBook Pro using Parallels. It worked fine. I had 8gb RAM and devoted 4 to the Parallels windows. I have run the 1500 on an HP Envy notebook using Windows 8 Pro. It works fine. I also run HRD and VAC and vspmgr and minideluxe. Last time I had it going, I had QSOs wi

[Flexradio] flex radio no audio

Hi ALL I had no audio and found out it was caused by the squelch being turned up too high , thought I had a broken radio but all fine now . Russell Bradley G0OKD IO93IC Derbyshire England 73,s and good flexing !!! ___ FlexRadio Systems Mailing

Re: [Flexradio] Flex Radio Community

Gerald the issue isn't posting of messages. It's the finding or retrieval of information. HRD did the same thing abandoning their email reflector and using a "forum". As far as I have seen, it's a disaster. Efforts to find info generates massive amounts of unrelated or irrevalent material. The

[Flexradio] Flex Radio Coffee Mugs

Now this isn't radio or computer related but I've noticed that many ham shacks pictures show guys drinking coffee from mugs with their favorite radio manufacturers logo on it. They are usually simple 10 or 11 oz white ceramic mugs.   Has there been any interest in such a thing? I sure would

[Flexradio] flex radio receive comparison

I have been following this forum and have been enlightened and educated and also have seen the spark of experimentation in amateur radio renewed in many people. Very refreshing to see this today. I am curious if anyone has compared the SDR1K receiver to the RFSPACESDR14 r

Re: [Flexradio] Flex Radio Exciting

FlexRadio@flex-radio.biz > CC: kl7...@alaska.net > Subject: [Flexradio] Flex Radio Exciting > > > WoW ! Check out this web sites. > > http://www.cqdx.it/woodbox/wbr-home-ita.html > > http://www.cqdx.it/woodbox/news_ita.html > > > 73's , Bruce > >

Re: [Flexradio] Flex Radio Exciting

iz] On > Behalf Of Jim R > Sent: Sunday, July 05, 2009 2:58 PM > To: kl7...@alaska.net; FlexRadioReflector > Subject: [SPAM] Re: [Flexradio] Flex Radio Exciting > > > On that second link, there is actually an artist drawing of the VHF/UHF > upgrade. > The drawing shows

Re: [Flexradio] Flex Radio Exciting

he VHF/UHF >> upgrade. >> The drawing shows what looks like 2 hybrid power modules on one end. I >> wonder if >> the drawing is reasonably accurate. >> >> Jim >> K5HY >> >> >> >> >>> Date: Sun, 5 Jul 2009 10:04:14 -0

Re: [Flexradio] Flex Radio Exciting

-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Jim R Sent: Sunday, July 05, 2009 1:58 PM To: kl7...@alaska.net; FlexRadioReflector Subject: Re: [Flexradio] Flex Radio Exciting On that second link, there is actually an artist drawing of the VHF/UHF upgrade. The drawing shows what lo

Re: [Flexradio] Flex Radio Exciting

ement!" (TM) -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Jim R Sent: Sunday, July 05, 2009 1:58 PM To: kl7...@alaska.net; FlexRadioReflector Subject: Re: [Flexradio] Flex Radio Exciting On that second link, there i

Re: [Flexradio] Flex Radio Exciting

alaska.net; FlexRadioReflector Subject: Re: [Flexradio] Flex Radio Exciting On that second link, there is actually an artist drawing of the VHF/UHF upgrade. The drawing shows what looks like 2 hybrid power modules on one end. I wonder if the drawing is reasonably accurate. Jim K5HY Date: Sun, 5 J

[Flexradio] flex radio operating voltages

Before saying, What a stupid question, please bear with me. I'm running off of solar power and batteries for the computer and radios. Has any body found out what is the lowest voltage this radio will be stable at? I may see only 11.9 to 12.1 volts at the worst of times, when the station has run

[Flexradio] Flex-Radio-Friends Site?

I am trying to get into the "Flex-Radio Friends" site and their upload section to get some .wav files to play with and it asks for a user name and password and apparently will not allow anonymous ftp connections. I cannot find where you register or can get a password to gain access to the site.. d

[Flexradio] Flex-Radio microphone pinout

Greetings all. I read that the SDR-1000 microphone pinout is the same as that of Yaesu microphones. Does that mean that one could just plug a Yaesu microphone into as SDR-1000 and it should work? I just got my SDR-1000 on Monday and tried it and it didn't work. Any suggestions? Also, does the

[Flexradio] Flex-Radio microphone pinout

"I read that the SDR-1000 microphone pinout is the same as that of Yaesu microphones. Does that mean that one could just plug a Yaesu microphone into as SDR-1000 and it should work? I just got my SDR-1000 on Monday and tried it and it didn't work. Any suggestions?" My experiences with the from p

[Flexradio] Flex Radio at Visalia

Gerald - I want to THANK YOU for being at the International DX Convention at Visalia. With all the preparations to unveil the SDR 5000 at Dayton I really appreciate your taking time to be at Visalia. It was good to see you again and to see the SDR 5000 for real. Also, I really had a really gr

[Flexradio] Flex Radio / Earlier Models

Hello, After reading the latest update on the new Flex5000, a thought had entertained me! In part of the update statements, this was mentioned. We will be doing at least triple testing of the early units, including live on the air operation. Does this mean some of us will get older versions o

Re: [Flexradio] FLEX RADIO SUPPORT

>To: FlexRadio@flex-radio.biz >Subject: [Flexradio] FLEX RADIO SUPPORT >Date: Thu, 26 Jul 2007 18:59:22 +0100 (BST) > >this is NOT monies donated > it is about support the product software and hard wear > this it will be good to pay member ship on the web of FLEXRADIO in order

Re: [Flexradio] FLEX RADIO SUPPORT

elan paim wrote: > this is NOT monies donated > it is about support the product software and hard wear > this it will be good to pay member ship on the web of FLEXRADIO in order to > support later development and like to be a member of the ARRL . > SO PLEASE Gerlad can set it then in the

Re: [Flexradio] FLEX RADIO SUPPORT

language that a regular joe like me can > understand so that we all can contribute to the radio's feature set. And > that, my friend, with be worth a heck of a lot to the folks here. > > > > Edwin Marzan > AB2VW > > > > > >> From: elan pai

Re: [Flexradio] FLEX RADIO SUPPORT

McGwier Sent: Saturday, July 28, 2007 7:15 AM To: Edwin Marzan Cc: [EMAIL PROTECTED]; FlexRadio@flex-radio.biz Subject: Re: [Flexradio] FLEX RADIO SUPPORT I agree with this. Gerald said this, and continues to say it. He proudly proclaims, with every right to, that the SDR-1000 number 1 continues

[Flexradio] Flex Radio Banquet album

Open to the public. http://www.facebook.com/album.php?aid=179399&id=827451648&saved#!/album.php?aid=179399&id=827451648&page=2 -- (Co)Author: DttSP, Quiktrak, PowerSDR, GnuRadio Member: ARRL, AMSAT, AMSAT-DL, TAPR, Packrats, NJQRP, QRP ARCI, QCWA, FRC. “One must be a fox in order to recognize tra

Re: [Flexradio] Flex Radio Net

Pick a time/freq and I'll join you. George Apalachin, NY K2CM FN22 From: James C.Miller [mailto:cameo...@frontiernet.net] Sent: Wed 6/23/2010 6:02 AM To: Flexradio Subject: [Flexradio] Flex Radio Net Is there another Flex Radio net other than he one th

Re: [Flexradio] Flex Radio Net

73's, Mike KE7WRJ --- gal...@townsoft.com wrote: From: "George Allen" To: "James C.Miller" , "Flexradio" Subject: Re: [Flexradio] Flex Radio Net Date: Wed, 23 Jun 2010 15:48:20 -0400 Pick a time/freq and I'll join you. George Apalachin, NY K2CM

Re: [Flexradio] Flex Radio Net

you never know. Old Mother Nature is a very tricky old girl. 73 Lee K9WRU - Original Message - From: To: "George Allen" Cc: Sent: Wednesday, June 23, 2010 2:01 PM Subject: Re: [Flexradio] Flex Radio Net There use to be a Flex radio next on 40 meters, in the evening,

[Flexradio] [Flex Radio] VFO Knob

Joe I use the Griffin First the knob is not free spinning. Second the driver for the Griffin is not locked to PowerSDR. That means that you have to switch to the PowerSDR screen so that it is the active screen to use the knob. Normally I use my mouse to QSY quickly and use the Griffin to fine t

Re: [Flexradio] Flex Radio Issues

Kirk, You are not the only one. I have had no problems either. I am running Vista Home Premium with RX2. However, I do NOT have RFIO #34 installed. Still using RFIO #27C. 73, Ray, K9DUR ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz

Re: [Flexradio] flex radio no audio

You are a better man than I! I was ashamed to admit that mistake after falling for it three time in one day!! 73 Jim W4YXU On Fri, Nov 30, 2012 at 10:43 AM, russell bradley wrote: > Hi ALL > > > I had no audio and found out it was caused by the squelch being turned up too > high , thought I

Re: [Flexradio] flex radio no audio

I've made that mistake more than once with the squelch. On Fri, Nov 30, 2012 at 2:09 PM, James McLester wrote: > You are a better man than I! I was ashamed to admit that mistake > after falling for it three time in one day!! > > 73 > > Jim W4YXU > > On Fri, Nov 30, 2012 at 10:43 AM, russell br

[Flexradio] [Flex radio] Newbie Follow-up

Yesterday the FlexRadio store showed the 5000 series on the list but "Not For Sale" if added to the cart. Today they have been taken off the list altogetherseems to be more than hearsay. http://cart.flexradio.com/FlexSeries-Radios_c_1.html _

[Flexradio] FLEX-RADIO 1500 FOR SALE

I have a 2 year old Flex Radio 1500 that I would sale. Used sparingly for QRP digital operations only. It's completely operational with all the stuff that came with it. It's been upgraded with the latest firmware and runs with the latest software available on Flex's site. I am adding another

[Flexradio] Flex-Radio-Friends Dayton handout

for your viewing pleasure http://www.n9vv.com/daytonevents.pdf Congratulations to Terry W0VB and his secret editor who created this fine handout de Ken N9VV

Re: [Flexradio] Flex Radio Coffee Mugs

t;Ken N9VV" <[EMAIL PROTECTED]> To: "Larry W8ER" <[EMAIL PROTECTED]> Sent: Sunday, September 25, 2005 12:17 PM Subject: Re: [Flexradio] Flex Radio Coffee Mugs Larry, a very generous ham had some made last year from http://www.iprint.com and they were beautifully don

Re: [Flexradio] Flex Radio Coffee Mugs

, September 25, 2005 11:06 AM To: Flex Reflector Subject: [Flexradio] Flex Radio Coffee Mugs   Now this isn't radio or computer related but I've noticed that many ham shacks pictures show guys drinking coffee from mugs with their favorite radio manufacturers logo on it. They are usually

Re: [Flexradio] flex radio receive comparison

age- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of peter oesterle > Sent: Friday, January 13, 2006 10:27 PM > To: FlexRadio@flex-radio.biz > Subject: [Flexradio] flex radio receive comparison > > > >I have been following this forum an

[Flexradio] Flex-Radio pulls it off

I've been using the SDR working the 3Y0X pileups and has been doing well indeed. Been getting use to seeing where he is listening and the going just above or below as he moves. But again would be nice to be able to click tune VFO B for the tx signal. I recently put up a 540 ft full wave loop for

[Flexradio] Flex Radio 3000 or 5000

Can I use flex radio on a MAC? Is their a MAc version of Flex Radio? Dave KA7RRA ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flex

Re: [Flexradio] flex radio operating voltages

Depends on the mode of operation and the TX drive you have set/ -Tim -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of k4xtt Sent: Sunday, March 14, 2010 1:37 PM To: flexradio@flex-radio.biz Subject: [Flexradio] flex

Re: [Flexradio] flex radio operating voltages

Not that I'm in the habit of recommending their products, but have you considered the MFJ-4416B "Super Battery Booster"? They claim the switching regulator efficiency is over 90% and that it will regulate down to 9V input. They also have a GoesInna->GoesOutta remote monitor (MFJ-4416BRC) for

Re: [Flexradio] flex radio operating voltages

I asked this question some time ago and received the following reply: All Flex-3000 users: The dropout voltage of the 5V regulator is 2.5V, all the lower voltage regulators are LDO types. I have completed a few simple low voltage tests, the production calibration tests all pass at ~11.4V. The prea

Re: [Flexradio] flex radio operating voltages

Thanks, that is what I needed to know. I will be a new Flex owner next week. On 3/14/2010 2:59 PM, Brian Lloyd wrote: I asked this question some time ago and received the following reply: All Flex-3000 users: The dropout voltage of the 5V regulator is 2.5V, all the lower voltage regulators are

Re: [Flexradio] flex radio operating voltages

One other thing to add to what Brian sent, the output may drop at the lower voltages for the same current draw, simple Ohm's Law..But it will work just fine at reduced voltages , just slightly lower output. Welcome to the group. Most of us are pretty decent folks .. :-) 73, Dudle

Re: [Flexradio] Flex-Radio-Friends Site?

At the top all the way to the right is a menu selection Join/Login If you are a member you login first, if you are not a member then you have to create an account first. < http://www.hamsdr.com/Home.aspx > I have some files here, but they are large; < http://www.qrpradio.com/pub/Ham/SDR/IQ%20

Re: [Flexradio] Flex-Radio microphone pinout

ge- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jim, W4ATK Sent: Wednesday, November 29, 2006 3:33 PM To: Flex-radio Reflector Subject: [Flexradio] Flex-Radio microphone pinout "I read that the SDR-1000 microphone pinout is the same as that of Yaesu microphones. Does

Re: [Flexradio] Flex-Radio microphone pinout

gt;-Original Message- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of Jim, W4ATK >Sent: Wednesday, November 29, 2006 3:33 PM >To: Flex-radio Reflector >Subject: [Flexradio] Flex-Radio microphone pinout > > > >"I read that the SDR-1000 microphone pino

Re: [Flexradio] Flex-Radio microphone pinout

AB2VW, The problem is that the SDR-1000 microphone pin-out is SIMILAR to the Yaesu, but not necessarily exact. The SDR separates the PTT ground (Pin 5) & the microphone return (Pin 7) to minimize ground loops. The Yaesu microphones are not necessarily wired this way. I found that I had to ju

Re: [Flexradio] Flex-Radio microphone pinout

Marzan, Edwin wrote: > Greetings all. > > I read that the SDR-1000 microphone pinout is the same as that of Yaesu > microphones. Does that mean that one could just plug a Yaesu microphone > into as SDR-1000 and it should work? I just got my SDR-1000 on Monday > and tried it and it didn't work. A

Re: [Flexradio] Flex-Radio microphone pinout

Alberto I2PHD wrote: > Two examples of microphones with different pinouts are the MD-1 and the > MD-100, both Yaesu. I tried the Yaesu MH-14 microphone, and that would not work either. Dave (G0DJA) ___ FlexRadio mailing list FlexRadio@flex-radio.biz

Re: [Flexradio] Flex-Radio microphone pinout

2006 6:30 AM To: flexradio@flex-radio.biz Subject: Re: [Flexradio] Flex-Radio microphone pinout Marzan, Edwin wrote: > Greetings all. > > I read that the SDR-1000 microphone pinout is the same as that of Yaesu > microphones. Does that mean that one could just plug a Yaesu microphone >

Re: [Flexradio] Flex-Radio microphone pinout

Hi Edwin, the MH-31 has the new Yaesu pinout for microphones. It can be used with the FT-1000MP (also Mark-V) and the FT-2000, together with the FT-847 and in general all the new Yaesu rigs. It has the same pinout as e.g. the MD-100. It won't work if plugged into the FT-1000D or the FT-736R

[Flexradio] Flex Radio for Remote Operations

Hello All I am a new subscriber to this list. I am interested in possibly purchasing a Flex Radio and I am interested to hear from anyone on the list that is using the Flex in a remote station installation. Currently I am remoting a TS2000 but I am finding its receiver performance to be a litt

[Flexradio] Flex Radio Perifherals For Sale

I am going to upgrade to the Edirol and want to offer my Presonus Firebox up for sale. It is a complete package and a blank registration card. It is functional in all respects and is as new. I used it for less than 10 hours. I have all the packing material. $190. I am also selling my Shuttle

[Flexradio] Flex Radio 1 watt Redirection

To me the redirection of the Flex Radio is nothing more than about cutting costs and increasing the profit. This is nothing new but when I first saw the Flex being demonstrated in the 3 board,no cabinet-yet, now 100w-yet form by non other than Gerald himself I was impressed by Gerald demonstarti

[Flexradio] Flex Radio 1 watt Redirection

Anybody can still have the 1 watt version. Just buy the 100W version and sell off the 100W amp 73 es HNY W9OY __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _

[Flexradio] Flex Radio 1 Watt Redirection

To those who complain about the American mantra, "cutting costs and more profits", try to remember that it is difficult to eat when one is not making a profit. My observation is that the sort of action taken by Flex Radio in narrowing its line-up is preparatory to placing new products on the

[Flexradio] Flex Radio Serial Number Decoding

How do I determine what vintage a Flex is from the serial number? TNX, Ron W4RDM ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexrad

[Flexradio] Flex Radio and DX Base

Hi Bill, I recognized your call from the DXBase reflector, welcome to the world of SDR! I also use DXBase with my other radio, an Orion and I've been trying to use DXBase to control both radios, ie the Orion as radio 1 and the Flex as radio 2. I'm unable to get the Flex to work on radio 2, but wor

Re: [Flexradio] Flex Radio / Earlier Models

[EMAIL PROTECTED] On Behalf Of Ken Sent: Thursday, July 19, 2007 12:42 AM To: Flex Radio Subject: [Flexradio] Flex Radio / Earlier Models Hello, After reading the latest update on the new Flex5000, a thought had entertained me! In part of the update statements, this was mentioned. We will be d

Re: [Flexradio] [Flex-Radio] keyer problems

Well, I never thought to try disabling the CAT port. I really thought at firs it was me and my paddles. Thanks guys, WOW! Maybe I am not as senile as I thought! I will check out the bug report after it gets posted and see if there is anything I can add, but it sounds like the problem is ide

[Flexradio] Flex radio at hamfest for sale?

Hello group, I was wondering if someone could tell me if there are flex radios available at the hamfest for sale from Flex? I am looking for a new Flex 3000 and would like to pick one up at Sea-Pac hamfest in a couple weeks. thanks! 73, Mark -=K7LEN=-

Re: [Flexradio] [Flex radio] Power up problem

I have a similar problem which started several weeks ago. When starting the 5K and then PSDR, I have no audio and no signals on the panadapter Start everything again and all is fine... If I turn on the 5K, then turn it off and back on again after the computer sees the 5K the first time,

Re: [Flexradio] [Flex radio] Power up problem

Make sure your PC is not going to "sleep" or hibernates before your starting the 5K and then PSDR. If your power management is shutting down the Firewire adapter it may not be waking up properly before starting the 5K and then PSDR. Power cycling the F5K before starting up everything will for

Re: [Flexradio] [Flex radio] Power up problem

Tim, does that also apply to the 3K? My problem is different in regards to firewire and power up. Apparently on occasion the firewire is not recognized on boot, and PSDR does not see the 3K. Power cycling does not help, and requires re-boot of the computer. The firewire card was changed to on

Re: [Flexradio] [Flex radio] Power up problem

Yes, it would applicable to both the FLEX-3000 and FLEX-5000 -Tim --- Tim Ellison, W4TME Product Management, Sales & Support FlexRadio Systems^(TM) 4616 W Howard Ln Ste 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com Web: www.flexradio.com

Re: [Flexradio] [Flex radio] Power up problem

Tim - This startup problem occurs immediately after my machine is booted up, so there's no opportunity for hibernation. Also my power management is set to High Performance. The problem seems to be caused by initial difference between the default sample rate in Flex Radio Global Settings (48K)

Re: [Flexradio] [Flex radio] Power up problem

On Tue, Jan 10, 2012 at 8:29 AM, Rod Brink wrote: > Tim - > > This startup problem occurs immediately after my machine is booted up, so > there's no opportunity for hibernation. Also my power management is set to > High Performance. > > The problem seems to be caused by initial difference betwee

Re: [Flexradio] [Flex radio] Power up problem

The 48K sampling rate shown in the Firewire control panel is the default setting on power up. PowerSDR, during the initialization, will instruct the the Firewire driver to re-set the sampling rate to the one configured in Setup. We have seen occurrences where this communication between PowerS

Re: [Flexradio] [Flex radio] Power up problem

The 48K sampling rate shown in the Firewire control panel is the default setting on power up. PowerSDR, during the initialization, will instruct the the Firewire driver to re-set the sampling rate to the one configured in Setup. We have seen occurrences where this communication between PowerSDR

Re: [Flexradio] [Flex radio] Power up problem

It is stored in the PowerSDR database which is unique to each radio type and individual unit. The driver does not maintain state information between sessions because different devices use the same driver. Example. If the driver stores 192K for a FLEX-5000 and the next time it was used by a F

Re: [Flexradio] [Flex radio] Power up problem

Tim - Makes sense. Thanks for the good explanation. 73, Rod, KQ6F ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-ra

Re: [Flexradio] Flex Radio Community on Google+

Yet another list to monitor. On Fri, Dec 7, 2012 at 8:44 AM, Aaren Jensen wrote: > For anyone who has been using Google+ over the last year they have just > added a Communities feature. > > There is now a *Flex Radio SDR* community so I encourage everyone on > Google+ to search for it in the n

[Flexradio] Flex Radio - Reception on Longwave Bands

The question of how best to listen to longwave on Flex radios pops up occasionally. Some have played with low pass or band pass filters with mixed results. Some report using several filters to cover the desired broad range or to eliminate especially troublesome AM broadcast crud. I've gone anot

Re: [Flexradio] [Flex radio] Newbie Follow-up

When I click on "buy now" I see the price, etc. What flex site are you browsing. Jim K4JAF -Original Message- From: Jon Hall Sent: Friday, May 17, 2013 7:30 PM To: flexradio@flex-radio.biz Subject: [Flex radio] Newbie Follow-up Guys, Several people have responded telling me the 50

Re: [Flexradio] [Flex radio] Newbie Follow-up

He's referring to the page that shows up when you click the Order Now icon 73..Jordan... - Original Message - From: "Jim Cox" To: "Jon Hall" ; Sent: Friday, May 17, 2013 6:37 PM Subject: Re: [Flexradio] [Flex radio] Newbie Follow-up When I click on

Re: [Flexradio] [Flex radio] Newbie Follow-up

I see what you are saying. I think the web site must be screwed up for some reason. Give Flex a call on Monday morning, I will ask Dudley on the Sunday Flex net about this if he is not in Dayton. 73s Jim K4JAF -Original Message- From: Jordan Arndt Sent: Friday, May 17, 2013 7:

Re: [Flexradio] [Flex radio] Newbie Follow-up

I found the same thing, perhaps they are out of stock at this moment. Jim K4JAF -Original Message- From: Don Sent: Friday, May 17, 2013 7:39 PM To: [Flex Radio] Subject: Re: [Flex radio] Newbie Follow-up Jon I found the same thing that you did. Yes it is still listed on the web sit

Re: [Flexradio] [Flex radio] Newbie Follow-up

Thanks for the info Don. I didn’t realize they were discontinuing the 5000. I guess the fully loaded 5000 and the 6500 is not that much difference in price. The 5000 is a great radio and some very good buys on the used market. 73s Jim K4JAF -Original Message- From: Don Sent: Friday

Re: [Flexradio] [Flex radio] Newbie Follow-up

Discontinuing the 5000 makes a lot of sense. The 6500 has an ATU, Four slice receivers, and the best available hardware and software for $4,300. The 5000 with an ATU and second RX was about $3,500, IIRC. With a price point that close on two top-end radios, it's better to get the customer bas

Re: [Flexradio] [Flex radio] Newbie Follow-up

In my opinion this is a seriously bad move by Flex, if it is true. Not everyone is interested in the 6000 series. I love my Flex-5000, Flex-3000 and Flex-1500, but if they are going to receive little or no support due to the 6000 getting the limelight, then my next move will NOT be to the Flex-6

Re: [Flexradio] [Flex radio] Newbie Follow-up

Making decisions based on 3rd hand information might not be the best thing to do... I'm sure that Flex will comment on this as soon as they get back from Dayton, if not sooner. GL to all, Eric (W1EL) On 5/18/2013 11:24 AM, John Kramer wrote: In my opinion this is a seriously bad move by Fle

Re: [Flexradio] [Flex radio] Newbie Follow-up

: Eric Lowell Sender: "FlexRadio" Date: Sat, 18 May 2013 12:06:47 To: Subject: Re: [Flexradio] [Flex radio] Newbie Follow-up Making decisions based on 3rd hand information might not be the best thing to do... I'm sure that Flex will comment on this as soon as they get back from

Re: [Flexradio] [Flex radio] Newbie Follow-up

rom: John Kramer To: flexradio@flex-radio.biz Radio Sent: Sat, May 18, 2013 11:24 am Subject: Re: [Flexradio] [Flex radio] Newbie Follow-up In my opinion this is a seriously bad move by Flex, if it is true. Not everyone s interested in the 6000 series. love my Flex-5000, Flex-3000 and Flex-1500, b

Re: [Flexradio] [Flex radio] Newbie Follow-up

> From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of John > Kramer > Sent: Saturday, May 18, 2013 9:24 AM > To: flexradio@flex-radio.biz Radio > Subject: Re: [Flexradio] [Flex radio] Newbie Follow-up > > In my opinion this is a seriously bad move by Flex,

Re: [Flexradio] [Flex radio] Newbie Follow-up

Many more years, they still >> support repair of the Flex1000 after all. >> >> 73's and this is not a flame but rather just some questions. >> >> Bret >> WX7Y >> >> -Original Message- >> From: FlexRadio [mailto:flexradio-boun...@f

  1   2   >