Sven Vermeulen wrote:
hello,
I succesfully installed linux mandrake 7.0 on my system last week. But
now I have a problem with X; the screen goes blank when X starts and
runs (and it's not a screensaver). I tried cltrl-alt-fkey to switch to
a text console, but whitout succes.
What's
FREMAIN ANDUJAR wrote:
I have a problem with the supermount i cant access my floppy sor CD
it say is bad mounted or not have any disk., I re-install the system but
still the same, any help
__
Get Your Private, Free Email at
Faizel Boorany wrote:
The contents of xterm are not legible.
All that shows is the cursor highlight as I type.
However, if I drag another window over the console window, it refreshes
and the contents (sometimes) become visible.
Any suggestions welcome.
Thanks
[EMAIL PROTECTED]
Chadley Wilson wrote:
hi all i wonder who knows
i have spent the past few days trying to figure 'mount' 'unmount' out
without luck
I have read the man pages but and now am confused.
Is the file system on another mdk7 box through the eth0 a nfs share
here are the commands I treid and
John N wrote:
I switch between Mandrake 7.02 and Win98 SE. I know, I know... but I
have clients who use Windows so I have no choice.
Under Linux I can reach any website without difficulty, hell even using
the floppy disk QNX and it's tiny browser I can do this.
Under Win98 there are
Altern8 wrote:
Hi gang,
I am would like to get a copy of Mandrake, and atm I have the following
modem and sound card,
Diamond Supra Express 56e Pro modem, and Creative Labs SB live player 1024
PCI.
Are these 2 compatible with mandrake? I looked at the web pages, but dont
find
magick wrote:
anyone know how to run freeciv i installed it from there mandrake rpm and
everthing went fine but know i don't what the executable file is to actually
run it anyone know ? -- to the future of linux together let's crush microsoft
and free our desktops forever
I don't know the
[EMAIL PROTECTED] wrote:
I have this returned mail and did not even send it to this person,
[EMAIL PROTECTED]
I think someone signed up for access through this group and put in the
wrong addy.
don
I thought I knew that I knew what I thought
But now I know that what I
bryan pryor wrote:
I am having trouble setting up the modelines for my monitor for X. It is a
Likom Futura 17" monitor, and I have a Trident 975 AGP vid card. Here are
the specs. If anybody can write the modelines from this, I'd really
appreciate it.
Vert. Refresh Rates: 50-100
[EMAIL PROTECTED] wrote:
Help.
I'm trying to fix my screensaver, it does not come on. I was told to look
for the Virtual Terminal. But,
I looked for the Virtual Terminal, and could not find it...will the Terminal
Emulator work? I tried typing in 'kppp' and nothing happened...
'A
"Diego González" wrote:
hi
i decided to install mandrake like a month ago, so i used partition magic.
in a few words, i had no trouble installing everything, so windows and linux
worked just fine. but some days ago my installation of staroffice took all
of my linux disk space, so i used to
Chadley Wilson wrote:
I've already sent this to Eugene Grimsdell to look at.
The problem is that when I remove my eth0 config completely then kppp
connection works
it has some thing to do with routing but when I try to add "route add
default ppp0" it spits out the error no route to host
"Antoniou, Stylianos" wrote:
Hi there,
I have configured two PCs (Mandrake7.0 RedHat6.1) in my college network.
When the network cards are connected to the network sockets everything is
fine,I have access to the www from both and when I ping from one to the
other I can get a connection.
Do you have the addresses for your name servers on your isp? The
easiest way to enter them is to go into linuxconf, network, client, dns
and put in what they give you.
Benjamin Sher wrote:
Dear friends:
Thanks to all the wonderful advice cocerning LInux and Vmware, I was
able to set up a Win3.1 virtual machine in Vmware and install Windows
Media Player 3.0. As I sadly explained yesterday, TV 6 of Moscow has
chosen to broadcast their LIVE domestic
stathis gotsis wrote:
i have mandrake 7.0.when i connect to the internet through kppp,then
netscape can find no host,the same happens with other applications ,such as
mail clients.what could be possibly wrong.i would appreciate any help.
kiriakos wrote:
Well thank you all guys, but 7.0-2 didn't do it for me. I did as Alan
suggested , that is I made a floppy from a cdrom.img of 7.0-2 version
and I still got the error message that I need 1180 megs and the /
filesystem is not sufficient. I managed to install the packages by
Ronald Brown wrote:
Hello Group,
In the install process, it asks the following question.
What partition and directory on that partition holds the Mandrake/RPMS
and Mandrake/base directory?
If you remember from my post yesterday, all my files are on my hard
drive. Actually: C:\7.0
John Catral wrote:
Hi! Has anyone gotten the LExmark Colorjet 2070 drivers to work for Linux?
Mandrake 7 doesnt seem to recognize it. I hope someone can help me out
because I dont want to print my school papers from WindoZe.. =) Thanks!
-JVMC
If nobody posts the url, check in the mail
"Michael D. Kirkpatrick" wrote:
I have a 4 gig and a 27 gig hard drive on my web server. Everything is
ran off of the 4 gig hard drive. The 27 gig hard drive is basically for
storing daily backups (Up to 2 weeks worth).
Is there a way to tell zip to treat all shortcuts (links) as only
"Jim Del Cañamo" wrote:
I have a Soyo SY6WM, it has a intel whitney 82810e chipset
I am looking for this driver
help me
:-(
__
Get Your Private, Free Email at http://www.hotmail.com
Don't know if it will work, but check intel's site for
Jack wrote:
Hi,
I just installed Mandrake 7.0 a few hours ago by using
my cdrom to boot the
installation up.
When I try to access any of my cds in the /mnt/cdrom,
it says it can't read the
disk.
Cory Hirano wrote:
Hello there]
I have two questions 1st How do I uninstall a desktop replacements? because
I want to upgrade to the latest version of IceWM but it conflicts with the
"light" version already installed. 2nd how do I install the isapnp file
needed to install Lothar so I
Cory Hirano wrote:
Hello again
I checked the error message and this is what it says
Kernel panic: VFS: unable to mount root fs 03:07
Do I have to reinstall mandrake again?
Cory
Does your boot floppy work to boot the hard drive?
If all else fails, you could try to do an upgrade
STEVE GREEDY wrote:
Hi all,
I've been trying (for about a week) to install Mandrake versions 6.1 and 7.02. on
the following:
Tyan 1854 motherboard
pentium PIII-600
128 meg ram
IMB 13.Gb HDD
MATROX G400max
SB 1024 soundcard
NE2000 comp. ethernet card
he problem is as
Ryan Drafall wrote:
Hello,
The subject pretty much says it all. Whenever I open a new
window, whatever the program may be, it always opens in a window that
is off-center on the screen. How do I make it automatically
maximize? Thanks for your help.
--
Larry C wrote:
I started several weeks ago with the idea in my mind that I would
install this Linux thing to play around with but surely not get serious
about. Now I find myself dreading the thought of booting back into a dos
environment (should put some sort of warning about this on the CD
If you downloaded .rpm files, you have to install them first. In KDE,
use the disk navigator to find the rpm, then click on it. The xrpm
program should come up with the archive so you can install it. Look at
the second tab in the window so you know where and what it's putting out
to run it
y? Geez... I must have always fallen asleep before I got to y parameter
in tar docs. I always did it the long way. z was impressed onto my
brain when I was young, so I knew that one.
Thanks Tom! Now I feel I should go to the web site and read more of
your information, but I always end up
Edit the messages log file in /tmp/log (or something close to that)
Piero Caracciolo wrote:
At 18:43 05/03/00 -0500, you wrote:
dmesg | more
Harald Wolf wrote:
Hi,
how can a review the error messages that my new selfcreated kernel
produces on startup ?
or
how avoid start
[EMAIL PROTECTED] wrote:
In a message dated 03/04/2000 6:01:54 PM Central Standard Time,
[EMAIL PROTECTED] writes:
Have you run printtool? If not run it at the command prompt.
Regards
John the Nadger
http://mklinux.cjb.net
How do I run that?
Open an Xterm in KDE and
If you can find a site that has the directories from the 6.1 CD instead
of the iso image, then go to the Mandrake/RPMS dir and find
telnet-server rpm.
James wrote:
Sorry if this has been asked before, but I cannot find the answer on the
Mandrake web site anywhere.
I have installed 6.1 (I
Del Craddock wrote:
I am trying to install 7.02 and it always locks up after it detects my
Adaptec 2940u2w and tries to install the driver.
Machine info
Motherboard - Abit BP6 with 2 400 Celrons
Adaptec 2940u2w, 400h, interrupt 5, id 7
256 meg ram
three scsi drives and jazz drive
Did you try creating a win98 boot disk, booting from it, and at the
prompt enter fdisk/mbr to see if that fixes the partition table?
condeuser wrote:
Hi penguinistas,
Not sure if this is a Linux or Windoze problem. Thoe,I suspect,the user
needs a thorough debugging.
Recently
Try www.mandrakeuser.org and www.linuxnewbie.org
Lothar Mandrake wrote:
The other week somebody posted a link to a page with advice on how to
get connected to the Internet using Linux. I stupidly clicked on "delete"
before I realized that I could really use that kind of information.
JUAN DAVID BOTERO BOTERO wrote:
Hello, my name wis David and i live in Colombia, actually i'm using
Mandrake 6 with kernel 2.2.9-27.
I got two printers, Epson LX-810 and Epson Stylus 300 but i can't work
with them, the LX-810 only works with pipes... "cat /etc/passwd
/dev/lp0" but does
Michael Haney wrote:
--
Hi all!
I really love Linux-Mandrake, I used to use RedHat 6.1, but this
distribution is so much better.
--
I am having a
Kit wrote:
I have an old MOUSE SYSTEMS serial ISA card...
with jumpers for setting IRQs and COM ports...
so I assume...I can use this card to install a external modem...
is this correct?
if so, HOW do I do this for
US Robotics 33.6 sportster
external modem
--
[EMAIL PROTECTED]
...03f8-03ff IRQ 4
and on the same card, is a 25 pin female plug
then,
I have a BestData VW-PCI 56k winmodem hooked up to com2 IRQ 9,
in windows, and IRQ3 in DOS
I do have two ISA slots left, that are free...
Audrey Beck wrote:
Kit wrote:
I have an old MOUSE SYSTEMS serial ISA
You need to install lilo to hda in this case. You need something to
boot from. hda1 is the actual partition for /.
"Potts, Ross" wrote:
I get a boot error after configuring the system on a new install. My system is
a Compaq Presario 4112 with a P200 for the CPU. It is maxxed out with 72
It can't be the password for root, it must be a user.
Tom Hicks wrote:
I have got the SMB to work and am able to see the box on the Windows
system. But when I try to log on to the box I am getting the IPC$
command. I have checked all the connections and I have user accounts
and what not.
James Mellema wrote:
Audrey Beck wrote:
vishal bansal wrote:
Hi all,
Kindly reply at [EMAIL PROTECTED]
After starting my linux box, after typing 'ps -aux' I see 12 instances of
httpd daemon each consuming 3.6% of memory. I could kill them , but is there
any
toie wrote:
i recompiled a kernel and everything is fine...my problem is booting to
iti use a boot disk to boot and i need to reinstall lilo after making
changes to lilo.config correct? how do i reinstall lilo on my bootdisk
to use the lilo.config i changed?
thanx in
Paul Eppley wrote:
I have my dial-up connection working, but I can't get anywhere in
Netscape--it keeps saying 'server not found'. I do have the appropriate DNS
entries in kppp. What else must be set?
Paul Eppley
http://users.nni.com/Paul_Eppley
In an xterm window, enter:
ifconfig ppp
Fernando Camacho Olmos wrote:
-- Mensaje Reenviado --
Subject: How to print in a hp 670 c
Date: Wed, 23 Feb 2000 21:10:01 -0600
From: Fernando Camacho Olmos [EMAIL PROTECTED]
in economic mode.
thanks
---
Go into
Jim Weaver wrote:
I have just installed Linux-Mandrake 6.1, I am logged in as the root
user, The cdrom was found in the initial installation. I have no idea
how to see what's on the cdrom of how to load the kde. I am very new
at Linux but I am fairly confident in the windows world. I have
Joerg Reinhardt wrote:
--
[EMAIL PROTECTED]
Doellbachstraße 15
34127 Kassel
Joerg Reinhardt
Hi,
after mixed up my tiny
Larry C wrote:
I am having a wonderful X configuration learning experience as I
continue to be unsuccessful configurng my monitor for 800x600 res.
Every setting from 1600x1200 32bit through 640x4808bit is great but that
darn 8x6. I have learned of the awe of Xconfig, the wonder of
vishal bansal wrote:
Hi all,
Kindly reply at [EMAIL PROTECTED]
After starting my linux box, after typing 'ps -aux' I see 12 instances of
httpd daemon each consuming 3.6% of memory. I could kill them , but is there
any permanent fix for this.
Thanks,
Vishal.
Sam Junge wrote:
Sorry for making this so long, but I wanted to make sure I included
all the details, so please take the time to read it :
I bought Mandrake Linux 7.0, which came with a version of
PartitionMagic as part of the "extra's" cd. I installed Partition and
BootMagic on my NEW
Papa wrote:
Hi folks,
I'm having problems getting a remote printer to work from my Linux Box. I can ping
the Win98SE box both by IP Address and hostname. However, when I set those items
up in printtool it does not even appear to access the hub to get to the Win98SE
box. Here are some
root wrote:
Please help...I'm about ready to quit Linux and go back to Windows forever.
I cannot get either of my PCI network adapters to initialize.
Lothar recognizes both of my adapters and lists them in the following
order:
3Com Fastnet 3C905B
Netgear FA310TX as DEC (Tulip)
I
Ger-Bil Jinn wrote:
Same here, I just got the 7.0-2 CD and it still can't recognize my
NE2000 compatible NIC.
:3)~~
Kyle \"Orange\" Spahn wrote:
Hey everyone,
I haven't been able to get my NE2000 compatible network card to work in
Lothar yet. I can't run the
Rog wrote:
So I got Mandrake 7.0 up and running, finally (after some Compaq
generated difficulties), but right now my screen resolution is
extremely low since I had to select Generic VGA for a vid card. I have
an integrated motherboard, an Intel 810, which uses an Intel 810
Chipset
Lane Lester wrote:
I just installed Mandrake 6.5, and when I tried to run kppp I was told
there was no ppp support in the kernel. I did a custom install, and I
certainly told it nothing that would imply that I would =not= be using
a dialup connection to the Internet.
What should I do
"Antoniou, Stylianos" wrote:
Hi there,
I caused a kernel panic, I booted with the rescue disks and I want to run
lilo and to change my fstab file. Unfortunately, I cannot run lilo by simply
typing /sbin/lilo and vi is not loaded. What am I missing?
Stelios Antoniou
mount your root drive,
George Houdek wrote:
Hi all
I have problem with Mandrake 6.1 Helios .I have VGA rage fury 128 with
32 MB memory.
problem is " canno't open X server and canno't open X win" I make
configuration with xf86config .
Pleas help :-))) George
I think there somewhere on the cd there is a driver
Louis Paradis wrote:
Hello,
I've installed MDK 7.0 in text mode by FTP. After the installation, I've
tried to log in as root, but it didn't work. Then I've tried as user and it
worked. But I can't use the startx command to start X windows. Then I've
used the passwd command under linux
Rajesh A wrote:
I installed Linux-Manrake 7.0 on my Inter PIII 500 machine.
Installation, went through, without any problem. During X
configuration, my adapters and monitors were detected automatically. I
could able to see the screen on Display test, during this process.
But, when I
webmaster wrote:
Hello Linux community,
I have a problem with my Best Data 56k External Linux Modem
connecting to the internet. It connects but the KPPP only lets me
stay on for 1-10 minutes before kicking me off. This is the message I
get back-
"The remote system does not seem to
"Ramiro Aceves, EA1ABZ" wrote:
Hello Linux-fans:
I can not set my GL5428 Vesa Local Bus video card with more than 256
colors in X-window (16 bit color).
Can you help me please?
Thanks in advance.
Ramiro.
What happens, or doesn't happen when you try to set it to a higher
number of
Sven Magnus wrote:
Hi guys!!
I've installed Mandrake without any problems, my monitor (AOC Spectrum 4Vn)
is even in the hardware list, but the problem is the driver doesn't work
right. In the test screen it's OK (because nothing's moving) but when I use
KDE and I move a window or
Rich wrote:
Can't get Xconfigurator to work. My monitor (Viewsonic A-90) is not in the
list and neither is my video card (Voodoo2000). Any ideas would be greatly
appreciated.
What version of Mandrake are you using? Voodoo2000 is there in 6.1. For
the monitor, you'll have to pick one
powerdiver1000 wrote:
Having problem setting up Monitor, I think thats why when it promps me
to start program it goes thru this long list of things then my Monitor
light turns amber nothing else happens. Any help would be
appreciated. Thanks Dewain Narron 757-866-0301
Nothing is wrong
[EMAIL PROTECTED] wrote:
Bingo!
I'll give this a shot tonight.
Can someone point me to information in the man pages about this - I have
beenthrough everything I can think of and readas much as I could, but I
guess I must have missed it. How did you guys figure this out? (You're
going
Abdoul Da Man wrote:
Hi,
I am using Mandrake 6.1 and everything is fine.
but I cannot print. I have a cannon BJC-2010 and
a Microtek scanner.
When I do:
$lpr filename
It's said something about connection refused but the
job is queued. I checked the lpd and it's running.
Thanks.
I believe the archive search is on the same page as the subscribe to the
list stuff.
Oliver Immich wrote:
Hello,
I am new to the list as a subscriber and very impressed by the traffic
here. Therefor I wonder whether the postings could be reduced to really
new questions (a number of them
Zulfiqar Naushad wrote:
Hello.
This might sound weird, but I need to network 4 linux boxes together.
Basically I already have them in a physical network. They are all assigned
IP's and they can ping each other.
But how do I access the other computer's drives without telnetting into
Yes. It's the file system, not the OS that allows for more
fragmentation.
Sevatio Octavio wrote:
Would you still have to defrag a FAT32 partition even if linux is the primary OS for
it?
Seve
-Original Message-
From: Anthony Huereca [EMAIL PROTECTED]
To: Newbie [EMAIL
Michael C wrote:
Hi,
I have a disk with a primary FAT32 partition (C drive) and an extended
primary partition.
The extended partition has logical drives d, e, f and g. These drives are
also FAT32.
I partitioned these using Partition Magic.
Linux (on seperate drive) can mount
[EMAIL PROTECTED] wrote:
I've been using LinuxConfto set my fstab file up. It all mounts, without
problems. Even got the CD-burner to mount after working out it was sr0.
Trouble is, only root has write permissions to everything. 'steve' only has
read permissions to the vfat mounted
[EMAIL PROTECTED] wrote:
Hello
I'd like to install LINUX in my intel-machine. My hard-disk is 9 Gb an I have a
1 G partition. When I try to do the a LINUX-NATIVE partition is imposible an
give me an error "partition too big". l have W95 in my computer too and I dont
wan't to erase the
KDE seems to write all over there and NEED it's configuration files it
puts there. I had to reinstall. Couldn't ever get it all fixed
properly. :(
Brent Timmer wrote:
Help!! I deleted the files in /tmp(thinking they were only temporary files).
Now I can't get into blackbox, cant run simple
Log in as root to a console window and enter:
cat /proc/interrupts
rharvey wrote:
is there a way to get a list of irq's. in windows you can see what irq
and dma's and addresses are free so you can set an card up to work
with the free resources. where can I find this info at it linux?
Dan Ros wrote:
Any ideas why?
Thanks.
--
http://www.uplink.freeuk.com - ICQ: 15212336
No witty comment or quote required.
Yeah, it's a bug. You can't go up to "/" root (hangs) and some vfat
partitions, you can't use regular mount (hangs). If it's a vfat
partition, you can edit the
Kit wrote:
How do you uninstall a bad install of 7.0 CD...and then re-install 6.1?
also, I tried a hayes smartmodem 2400 (external) just to see if it would
connect...and it wouldn't.
Got any ideas...
also, WHERE is KPPP on the CD? what's the RPM called...?
isn't the above modem a
Edwin Chua wrote:
Hi all,
Pretty bad at managing a Linux. Here's my questions :
1.How do you go about to configure ur sound card??
2.I select a generic graphic card (S3 3D Trio), when I start my netscape, a
error msg stating that it can only support a mono visual screen. However,
Ger-Bil Jinn wrote:
I lost the original message of the guy who did reply to me, but the
thing is, my soundcard is plug and play and was successfully detected by
Mandrake 6.1. My old Ethernet card wasn't plug and play but 6.1 was able
to successfully configure it on its own. Since
In KDE, try playing with printtool. Make sure that you setup the
printer to the correct thing, local, remote, samba, etc. You can
reselect the driver and port there to test.
vishal bansal wrote:
Hi Guys:
I have just installed linux-mandrake 6.1. I selected the right printer
during the
Benjamin Shugar wrote:
Hello My name is Ben.
I have a netwrok at home and a print server. My print que cannot
start print daemon lpd. THe jobs go to the que but the que cannot
start the daemon. All my other internet services work fine on it. I
can ping the print server so I know it
Ger-Bil Jinn wrote:
Neither the installation or Lothar was able to detect my network card
(NE2000 compatible), and the same goes with my soundcard (Creative
AWE64), and both are the only ISA devices I have on my computer.
Can someone please help me? Thanx!
:3)~~
Heberto del Rio Guerra wrote:
Hi I just got Linux Mandrake 7.0 and install it. Everything went fine,
but... It didn't auto configure my IDE Zip that used to work perfect under
Windows 95, Linux Red Hat 5.2 and Linux Red Hat 6.1.
When Mandrake is loading it recognizes de IDE ZIp it sees it
Works fine in Mandrake 6.1.
Audrey Beck wrote:
Dave wrote:
I tried changing (in the BIOS), the eth0 to IRQ 3...and when I went back to
linux, ide0 had changed with it...is there some other way to change IRQs
then?
thx
-Dave
I have the same type of thing. I thought it was just
Alek wrote:
Hello,
I would like to change the default file associations. Ex. I'd like to
have FreeAmp play/open my mp3/m3u files instead of the KDE Audio Mpeg
Player.
Where/how please.
Thanks,
Alek
There is a section on it in the KDE help file. What I did was to go
into K Explorer and
Enter:
startx
Do you get errors or?
JP wrote:
I also have installed linux-mandrake twice and I can't get kde going
either. I have xterm and xconsole up but can't get kde to start. I
have re-read the installation guide and notice that at one point it
mentions selecting the components to
Benjamin Sher wrote:
Dear friends
(Using Mandrake 6.1)
My mouse freezes in Netscape and elsewhere in X windows (KDE) and in the
Console. It was working fine for months and now is constantly breaking
down (every few minutes -- I hope I can get this message out before it
breaks down
Mike wrote:
H, that is a humungeous amount to read and understand :-(
Let us assume for a minute that I am a total idiot.
Its easy really, my wife does it all the time :-(
How would one such as me go about adding my 2nd EIDE CD type device and then
setting it up as a
sdos wrote:
Hello, I have recently installed Mandrake 7, and love it, only problem I
have is I have 2 network cards, one in a linksys ehter16 isa, and the other
is a 3com 506b isa (which I believe some one has posted about already) I
can't get either one to work, it sees the 3com for sure,
Benjamin Sher wrote:
Using Mandrake 6.1
I am typing to you from Pine in the Console.
I have been having endless problems with my mouse.
I thought I would try testing it in Gnome. Well, it's even worse in Gnome.
In KDE, my mouse lasts about 5 to 10 minutes. In Gnome, it dies almost
Lance Borden wrote:
I'm at a dead end here...sure hope y'all have some insight!
I'm trying to recompile my kernel for my zip100 parallel port drive. When I get
to the 'make bzImage' step, I get the following error message every time:
gcc -06 -fomit-frame-pointer -fno-exceptions -fno-rtti
David Schur wrote:
I am running a 2 hd computer 1st is all windows ( c ), 2nd is 1/2 linux 1/2
vfat partition. ( broken into two more drives a primary and a logical - d/e )
Ok i Did the stupid mistake and installed it to hda1 instead of hda yea
stupid me, now i don't know how to
Daniel Boyd wrote:
hey,
ive just installed mandrake 6.5, and altho i set the resolution to 1280x 960
( i think).. i now have what seems to be 4 'screens' which i have to scroll
through... but its at what seems to be a paultry 640x480.. or mayb even
worse
can any1 tell me how to change
Daniel Boyd wrote:
What's happening is that X is using the SVGA driver and putting you in
640x480 or else using double scan. Try running XConfigurator to
re-detect your video and monitor. Sometimes even when a card is
supported it does this. Then you have to manually edit the
Go to the linux-mandrake.com page for mailing lists, then unsubscribe
newbie with your old address and subscribe with your new address.
Brian E Popp wrote:
Hello -
I'm new at this, having worked on mainframes for years, but would like
to switch to Linux probably for the same reasons
[EMAIL PROTECTED] wrote:
In a message dated 2/8/00 4:28:36 PM Central Standard Time, SpartanTJedi6746
writes:
hi,
i'm new to the list and Linux and I have a AMD K62 350 and I have two
hardrives and i'm running windows 98 and Linux. I want to mount my other
harddrive so linux can read
Alex wrote:
I'm a sys admin for NT in a company but I'm just getting around to the Linux
(mandrake)6.5.
I would like to know how to install those programs with that extensions I
have the chance to download a lot of stuff in the net but having trouble
trying to unzipped and install...
I've done it.
Vic wrote:
Just to announce,
Mandrake 6.1 has a bug, you cannot, no matter what you do,
no matter how hard you try, there is NO make menuconfig in
Mandrake 6.1, they screwed up, you install the kernel headers
and the sources, and still will not make menuconfig or xconfig,
Alek wrote:
Hello,
I have a strange problem (or at least it seems strange to me ;) :
If I launch kppp as root, there is no problem (besides Wrong charset!
witch I have no ideea what should I do about). If I launch kppp as a
regular user, my user, it tells me that there is no ppp support in
Check in the mail archives (beginning to mid January 2000) and try
searching on Phoebe. Ramon Gandia wrote up a nice tech page on modems
in the expert mailing list. There were some good discussions and
recommendations on modems. I don't remember if they were all in expert
or in both expert and
Have you tried using setserial to setup the modem first?
Dave Gunter wrote:
I am having problems with my modem as well, the jumpers are set correctly and I ran
the query
in kppp it worked once then I do it again I get a error message "Sorry the modem is
not
responding" I've tried
1 - 100 of 153 matches
Mail list logo