Whether all usb external modems work properly in Linux. Whether there is also
winmodem?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
Want to buy your Pack or Services from
3
A2 values: 5C C6 26
Disk type:Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
what is Reference speed? how is connected to Indicated writing power. Then
what is recommended erase/write power? there is no recommended erase/write
power for cdr. why?
--
L.V
etters. ie tha or dha and also . above letters(mei ezhuththukkal). Can I get
tscii keyboard layout used in mdk9 and how to get various combinations. I
tried http://www.tamil.net/tscii/. I couldn't find. Can I get correct url for
the same.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Law
t;
> You can contact Stef (developer) at [EMAIL PROTECTED]
thanks for the info.
Which distro you are using now. I don't have /dev/parport0. I have mdk9. I
installed scanner using control center. I edited dll.conf and also
umax_pp.conf for port 0x378 as I didn't have /dev/parport
On Monday 04 Nov 2002 8:22 pm, Derek Jennings wrote:
> On Monday 04 Nov 2002 1:31 pm, L.V.Gandhi wrote:
> > I have chosen and installed tamil as language in mandrake. I get a few
> > menu options and dialog boxes with Tamil language. Already I have tamil
> > support and font
of GTK+. You must create a helper
program instead. For further details, see:
http://www.gtk.org/setuid.html
Refusing to initialize GTK+.
How to make it work both as user?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex
keyboard selection icon in panel. I selected tml keyboard. Still type shows
only english. I have following files for tamil installed.
koffice-i18n-ta-1.2-0.rc1.2mdk
kde-i18n-ta-3.0.3-2mdk
What to do for getting tamil letters in KDE?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony
make: *** [KHdRecord] Error 1
How to go now?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
also for port. Initially it was
port /dev/usb/scanner0
Since it is a parallel port scanner attached to lp1, I used as follows
port 0x378
Even after restarting linux, xsane couldn't find scan device. What to do?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visak
download error or an error in rpm itself?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
I have installed tamil language support. But how to type tamil letters.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
Want to buy your Pack or Services from MandrakeSoft?
Go to http
30]: Updated timestamp for job
`cron.weekly' to 2002-09-26
Sep 26 07:23:05 localhost anacron[1468]: Job `cron.weekly' terminated (mailing
output)
[root@localhost log]#
Any explanations pl.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RT
automatically identified and configured by me. Why these messages occur? How
to stop it?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Should hdparm be run for a cdrom device say /dev/hdd after it is mounted?
I have HP 9100c cd writer.
Enabling dma for it is worthwhile or not?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
On Monday 23 Sep 2002 1:52 pm, Derek Jennings wrote:
> On Monday 23 Sep 2002 2:20 am, L.V.Gandhi wrote:
> > I would like to get opinion about the relative qualities of galeon 1.0.3
> > and opera 6 regarding speed etc.
>
> They are both great browsers. Galeon is generally co
I have java installed. I included path for plugins in opera. still no jre
report i get. I didn't find any option in preferences for showing java path.
How to make it recognize java
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor
I would like to get opinion about the relative qualities of galeon 1.0.3 and
opera 6 regarding speed etc.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
Want to buy your Pack or
I am thinking of a new P IV and suitable mother board. I want to know whether
mandrake 9.0 supports out of the box intel 845 GL on board graphics and
C-Media CMI 9738 onboard sound.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC
On Wednesday 11 Sep 2002 8:35 am, Damian G wrote:
> On Tue, 10 Sep 2002 19:15:38 +0530
>
> "L.V.Gandhi" <[EMAIL PROTECTED]> wrote:
> > DivX files can be viewed in PC. But is there any commercial players that
> > can be connected to TV
>
> uhm.. you mean
es as below.
libavifile0.7-0.7.7-0.20020528.1mdk
libavifile0.7-devel-0.7.7-0.20020528.1mdk
avifile-player-0.7.7-0.20020528.1mdk
Still libavcodec is not taken while compiling.
Sound is not captured when using v4l device.
I will be thankful if you can reply how to recompress to various formats?
sample commans wit
edia
> Studio just to name two of them) and the resulting quality ( especially
> when changing resolution/ scaling or converting framerates ) is unmatched.
>
>
> Damian
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex,
rm -I /dev/hdb gives as
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
> For judging huge data
> crunching (video editing?) capability you might wanna look at some
> benches like 'bonnie'.
Any pointer please?
--
L.V.Gandhi
203, Soundaryalahari Apartments,
ny pocket players
> to support the format and MP3 would be dead.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
Want to buy your Pack or Services from MandrakeSoft?
MAKEDEV: error making /dev/parport0: File exists
[root@localhost dev]# ls -l parport0
ls: parport0: No such file or directory
[root@localhost dev]# ls -l parport0-*
crw-rw1 root lp99, 0 Sep 9 2002 parport0-
What to do to get parport working.
--
L.V.Gandhi
203
Bian 815MB.
How to know whether MB supports which udma?
Any more finetuning is possible? How to know the connecting cable is 80 wire?
Whether with 80 wire connecting cable be used for HP 9100c CDWriter?
On Monday 09 Sep 2002 9:00 pm, Tom Brinkman wrote:
> On Saturday September 7 2002 08:26 pm
A few harddisk questions.
How to know whether enabling dma is OK for a harddisk?
I have two harddisks
one Seagate 20 gb ata 100
other Samsung 40 gb ata 33
What will the effect ata value on data transfer?
I have PIII 866 machine with 256 MB sdram.
--
L.V.Gandhi
203, Soundaryalahari Apartments
ctive. (two days hence).
>
> Civileme
It is very sad to hear it! We do hope you continue to contribute to the list.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED], [EMAI
On Sunday 28 Jul 2002 10:54 am, Damian G wrote:
> On Sun, 28 Jul 2002 09:35:07 +0530
>
> "L.V.Gandhi" <[EMAIL PROTECTED]> wrote:
> > On Sunday 28 Jul 2002 12:08 am, Damian G wrote:
> > > On Sat, 27 Jul 2002 20:56:22 +0530
> > >
> > > &
On Sunday 28 Jul 2002 12:08 am, Damian G wrote:
> On Sat, 27 Jul 2002 20:56:22 +0530
>
> "L.V.Gandhi" <[EMAIL PROTECTED]> wrote:
> > I wanted to reinstall mjpegtools..For this jpeg-mmx and libmovtar needs
> > to be installed first.
> > As a pre-re
On Sunday 28 Jul 2002 1:59 am, Derek Jennings wrote:
> On Saturday 27 Jul 2002 4:30 pm, L.V.Gandhi wrote:
> > On Friday 26 Jul 2002 8:35 am, civileme wrote:
> > > john m. drouhard wrote:
> > > >I have sound working. (Sort of). All of the KDE sounds work ok. But
>
ons. But other programs specially for video
programs what to do to get it run under soundwrapper?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED], [EMAIL PROTECTED] linux user No.
ibs]
[--cflags]
After seeing above comment, I renamed sdl-config to sdl-configv. Then I made a
script file calling /usr/bin/sdl-configv --version.
I got
[root@localhost libmovtar-0.1.3]# /usr/bin/sdl-config
1.2.3
What to do to get SDL recognised?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Laws
sr/lib/qt3/lib/libqt-mt.so.3.0.4
/usr/lib/qt3/lib/libqui.so.1
/usr/lib/qt3/lib/libqui.so.1.0
/usr/lib/qt3/lib/libqui.so.1.0.0
Where I am wrong?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
kdm to only
> show users in a range of UIDs. I had to explicitly name root as being
> excluded from the list to get rid of it. (I have not checked to see if
> Kde3.0.2 has fixed this bug)
>
> derek
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 53
When I use mplayer or ffmpeg, I don't get sound. I tried soundwrapper as used
for xmms, it also didn't help. May be it is sound only. How to make sound
server recognise these video programs?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
I have mdk 8.2 with kde3 in /opt. I tried to change kdm settings. Though I
could change them in dialog, it is not taking reflected when I logout/reboot.
What to do. I work in kde3.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC
For video recording, I have read in many places that speed of HDD should be
7200 RPM. I have one 8.1GB and 20 GB seagate HDDs. On the label I coudn't
find anything. Any software to find out?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON
areas
> in Control Center to see what all can be changed
link for liquid theme rpm for kde3 and mdk 8.2
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED], [EMAIL PROTECTED
c .kde3/share/config/kpersonalizerrc
this should help. or edit .kde3/share/config/kpersonalizerrc with line
[General]
FirstLogin=false
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED]
l soundcards provide different channels, one for
> PCM, other for audio CD, other for MIDI, so depending on the
> kind of sound you are trying to play, you are able to play more
> than one sound at the same time, for example, you will still
> be able to watch a movie and at the same ti
On Thursday 27 June 2002 03:34 am, robin wrote:
> L.V.Gandhi wrote:
> >I have kde3 with mdk 8.2.
> >I wanted to compile an application which needs QT3.
> >I did
> >[root@localhost arson-0.9.6-kde3]# export QT_DIR=/usr/lib/qt3
> >[root@localhost arson-0.9.6-kde3
On Wednesday 26 June 2002 10:00 pm, Damian G wrote:
> On Wed, 26 Jun 2002 18:56:09 +0530
>
> "L.V.Gandhi" <[EMAIL PROTECTED]> wrote:
> > What to do for sound?
> > When I first tried to play
> > mplayer /mnt/wind/LailaOhLaila.avi
> > AO: [oss] 441
On Wednesday 26 June 2002 07:20 pm, Charles A Edwards wrote:
> On Wed, 26 Jun 2002 18:18:38 +0530
>
> "L.V.Gandhi" <[EMAIL PROTECTED]> wrote:
> > I have avifilefiles downloaded from cooker as follows
> > libavifile0.7-0.7.7-0.20020528.1mdk
>
/init audio device -> NOSOUND
What can be the reason for this behaviour?
On Tuesday 25 June 2002 08:52 am, Damian G wrote:
> On Fri, 21 Jun 2002 23:48:11 -0300
>
> Damian G <[EMAIL PROTECTED]> wrote:
> > On Sat, 22 Jun 2002 07:35:19 +0530
> >
> > "L.V.Gandhi&q
0.2) (library qt-mt) not
found. Please check your installation!
config.log also couldn't throw much light.
What to do for proper compiling?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL P
: aviplay: undefined symbol:
_ZN12QPaintDevice12x_appdisplayE
How to make it work?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED], [EMAIL PROTECTED] linux user No.205042
Want
to do with soundwrapper?
On Saturday 22 June 2002 08:18 am, Damian G wrote:
> On Sat, 22 Jun 2002 07:35:19 +0530
>
> "L.V.Gandhi" <[EMAIL PROTECTED]> wrote:
> > I have mdk 8.2 with kde 3 in /opt and gcc 3.1.1.
> > I compiled MPlayer .90 rev 4 with --enable-gui option. I
WP::Protocol::MyFTP: Bad hostname
'ftp.perl.org']
Fetching with Net::FTP:
ftp://ftp.perl.org/pub/CPAN/authors/id/J/JS/JSTOWE/TermReadKey-2.20.tar.gz
What to do?
Whether any rpms are available in mdk82 cds or cooker
On Friday 21 June 2002 07:41 pm, Alastair Scott wrote:
> On Friday 2
found /mnt/wind/***[EMAIL PROTECTED]'
When I open the same file as argument to gmplayer in terminal it opens. But
still I get no sound?
What could be the reason?
What to do to make it work normal?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON,
: Missing.
Module Digest::MD5: Found.
I am using mdk 8.2. Where the missing modules lies(which rpms to install?)
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED], [EMAIL PROTECTED
: error: Qt (>= Qt 2.2.2) (libraries) not found.
Please check your installation!
Where I am going wrong?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED], [EMAIL PROTECTED] li
lies/composes a mail and sends it outbox permission also changes as
above. Because of this other user can not download mail or send any mail.
How to avoid these changes?
If it can't be avoided how it can be rectified.(users are not expected to do
any comand line job or to run any other program
loaded module is loaded what will be the effect?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED], [EMAIL PROTECTED] linux user No.205042
Want to buy your Pack or
___
> MSN Photos is the easiest way to share and print your photos:
> http://photos.msn.com/support/worldwide.aspx
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED],
I have installed lm-sensor rpm from mdk 8.2 cds. I want to know how to
configure it. Any pointer or doc will be appreciated.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED
I have installed lm-sensor rpm. I want to know how to configure it. Any
pointer or doc will be appreciated.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED], [EMAIL PROTECTED
how to getrid of korganiser alarm monitor from the panel. I couldn't see any
options in panel.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED], [EMAIL PROTECTED] linux
?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED], [EMAIL PROTECTED] linux user No.205042
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Thursday 28 March 2002 04:37, Derek Jennings wrote:
> kdebase-nsplugins
in mdk 8.1 I couldn't find. Where is it?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED],
I have made an alias in /etc/bashrc, $HOME/.bashrc and $HOME/.bash_profile
as given below
alias l="ls -alF --color=yes |more"
this doesn't give the desired/actual result as given in command line.
Any help please.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony
I have pixelview play tv pak.
I use xawtv from mdk 8.1. When I use ffmpeg for capture to mpg file, there is
no synchronisation of audio and video. I saw also FAQ and to do where in
sync problem was mentioned. Any solutions please?
-- -
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay
For me saytime program was working in mdk 8.0. But in mdk 8.1 it is not
working and msg says /dev/audio could not be found. I did
ln -s /dev/sound/dsp /dev/audio
I am getting garbled sound. How to go about to make saytime to work?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay
I have seen some msgs saying we can get java working in konquorer with above
rpm. I couldn't find in mdk 8.1 CDS. From where can one get it?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020
/sound/dsp
>
> Try making a symlink
> ln -s /dev/sound/audio /dev/audio
>
> HTH
>
> derek
>
> On Tuesday 29 January 2002 14:46, L.V.Gandhi wrote:
> > I have working mdk 8.1. Sound is working normally.
> > I have installed program saytime which tells current tim
On Wednesday 30 January 2002 07:05, Ric Tibbetts wrote:
> On Tue, 2002-01-29 at 06:46, L.V.Gandhi wrote:
> > I have working mdk 8.1. Sound is working normally.
> > I have installed program saytime which tells current time. It worked in
> > mdk 8.0 and RH 7.1. It is not workin
?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED], [EMAIL PROTECTED] linux user No.205042
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Sunday 20 January 2002 07:26, Ron Secord wrote:
> On Friday 18 January 2002 10:17 am, L.V.Gandhi wrote:
> > I have selected settings, spellckecker.
> > In the dialog box that comes selected client as aspell.
> > Still when I select edit spellcheck I get the msg.
> &
erything works just fine in windows so I know it's not a
> hardware problem. Anybody know how to fix this?
>
> Thanks,
>
> -Chuck
kindly check whether tuner card sound out is connected to sound input of
sound card.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay
working.
>
> OOPs, forgot to mention that the "settings to click on is in the box you
> get when you are sending a message, so first you have to click on "new
> message" HTH
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5t
perly configure and in your path.
aspell is in path and installed.
How to get it working.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED], [EMAIL PROTECTED] linux user No.205042
Wa
.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED], [EMAIL PROTECTED] linux user No.205042
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
e the
mandrake expert during this period. Validity exist upto 25/2/2
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED], [EMAIL PROTECTED] linux user No.205042
Want to buy your Pa
perly configure and in your path.
aspell is in path and installed.
How to get it working.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED], [EMAIL PROTECTED] linux user No.205042
Wa
Where is the point of storage kmail dictionary for backup purposes.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED], [EMAIL PROTECTED] linux user No.205042
Want to buy your
.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED], [EMAIL PROTECTED] linux user No.205042
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
As user, I open root console. I change settings scheme to white on black. and
do save settings. When I reopen settings scheme is back black on yellow. How
to change it permanently white on black.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON
ead can
> import from Excel. SO the the question comes down to can Outlook export
> into Excel?
>
> Well I don't know since I have never used Outlook. (I have never had an
> email virus either. Coincidence? maybe)
>
> derek
>
> On Wednesday 19 December 2001 02:
er"
Content-Transfer-Encoding: 8bit
Content-Description:
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED], [EMAIL PROTECTED] linux user No.205042
Want
gt; If someone does know how to instruct Mandrake's installer to put it's
> > > > boot block on /boot (folks seem to call this a "superblock",
> > > > apparently), please tell me - I'd really like to give Mandrake a run
> > > > - but please don't tell me to t
Though some posts were there for converting mail to Kmail, how to convert
outlook express address books to Kmail format.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED
ail 1.2
>
> Bryan S. Tyson
> [EMAIL PROTECTED]
> ***
Content-Type: text/plain; charset="iso-8859-15"; name="message.footer"
Content-Transfer-Encoding: 8bit
Content-Description:
tell me - I'd really like to give Mandrake a run - but please
> > don't tell me to trash System Commander: I've paid for it, I like it, and
> > it's friendly to my family users, who don't want to have to learn
> > anything else :-)
---
---
> >
> >-------
> >
> >Want to buy your Pack or Services from MandrakeSoft?
> >Go to http://www.mandrakestore.com
>
> ==
> Julian A. Opificius.
> 802 Fawn Road, Elk River
still didn't
> have sound. So I think it's the xawtv that is having trouble encoding
> the sound... Does anyone know what's going on? Thank you.
>
> -Valerie
I also had the same problem. Use streamer that comes with xawtv in console.
to use read man streamer.
--
L.V
og or wtmp -- we'll rotate them here
/var/log/wtmp {
monthly
create 0664 root utmp
rotate 1
}
# system-specific logs may be configured here
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 5300
permissions are 755 for /home/lvgandhi and 775 for public_html and
public_html/cgi-bin under /home/lvgandhi.
Where I am going wrong?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED
mes in xawtv I use $songrec 1.
As soon song is over, I pressctrl+c. I get song1.wav. However it is better to
see the recording poit in a mixture either mike or line.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatn
and
suggest me improvements and errors if any.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED], [EMAIL PROTECTED] linux user No.205042
Want to buy your Pack or Services from
We wanted to utilize Epson 105+ for printing with Linux. Printer driver
selected for epson 9 pin med res. Other epson dotmatrix options don't work.
I get in a particular line top half of line is printed separately and then
bottom half. How to avoid it and get normal printing?
--
L.V.G
reate separate cgi-bins?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED], [EMAIL PROTECTED] linux user No.205042
Want to buy your Pack or Services from MandrakeSoft?
Go to
ive me the details.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED], [EMAIL PROTECTED] linux user No.205042
Want to buy your Pack or Services from MandrakeSoft?
woffle
where if I request pages it gets recorded as request. But if I start wwwoffle
-online using control provision I can browse. How ip-up.local is started. As
I see it is started by ip-up. If I am correct how ip-up is started.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, V
both the
printers are printing test pages properly. How to remove the printer queue
with cups? How to make the above printers work.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL
I have both mandrake 8 and pcq 7.1 working on the same machine. When I rec
sound in terminal if I press ctrl+c, rec stops in pcq 7.1, but not in mdk 8.
What can be the reason?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex
couldn't get any
solutions. Advise is welcome.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED], [EMAIL PROTECTED] linux user No.205042
Want to buy your Pack or Services
When I try to dump audio using the option it dumps all the songs even If I
give track number. Any way to dump only a particular track?
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL
I tried for tripod as
ftp:[EMAIL PROTECTED]
It didn't work. It didn't ask for password. By inserting with : after
lvgandhi also didn't work.
On August 20, 2001 08:05 pm, Liam O'Connell wrote:
> L.V.Gandhi wrote:
> > How to do ftp with login:password to a site
download directory you use.
>
> Drag the file from the ftp half-window to the local half-window and repeat
> as required.
>
> If the download breaks, then set up as before and drag--you will be asked
> whether you want to resume or overwrite.
--
L.V.Gandhi
203, Soundaryalahari Apa
/index.html. Any solutions pl.
--
L.V.Gandhi
203, Soundaryalahari Apartments, Lawsons Bay colony, Visakhapatnam, 530017
MECON, 5th Floor, RTC Complex, Visakhapatnam AP 530020 INDIA
[EMAIL PROTECTED], [EMAIL PROTECTED] linux user No.205042
Want to buy your Pack or Services from MandrakeSoft?
Go
t; -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]] On Behalf Of L.V.Gandhi
> Sent: Saturday, August 04, 2001 10:35 PM
> To: [EMAIL PROTECTED]
> Subject: [newbie] Scanjet HP3200C
>
>
> Whether anybody is working with this scanner in Linux. I need
101 - 200 of 229 matches
Mail list logo