Tutto ok fino al momento di modificare un file
riguardante la lingua
(/etc/sysconfig/i18n) dove si consiglia di digitare
con editor di testo
(kate) la seguente stringa LANG= it_IT.
Non riesco a salvare la modifica, un messaggiio
indica impossibile salvare,
lo scarto è continuo cosa
Pollo wrote:
Ciao a tutti.
Possiedo uno scanner agfa snapscan e25 USB e uso la mdk8.1 ma non
riesco a scansionare nulla.
Ho seguito i consigli trovati su sourceforge.net ma niente.
Ho ricompilato il kernel con i moduli per l'USB ma ancora niente.
Qualcuno saprebbe aiutarmi?
Vedi
hà personale poste wrote:
la situazione futura che vorrei invece è:
avere windows;
avere 2 (o anche 3 visto che si puo') linux di cui uno di uso stabile
e gli altri per eventuali esperimenti;
almeno il linux stabile deve avere sia l'office che il
Premetto che fino al 1996 sono stato programmatore
DOS linguaggio C con qualche nozione di C++; Conosco
linux solo dal 1998 attraverso le riviste che
leggiucchiavo in giro, ma me ne sono innamorato e ho
tutta l'intenzione di imparare e usarlo come
ambiente e strumento principale, e
ho installato xfellow (un emulatore per l'amiga)via
rpm ma mi ha richiesto le libSDL-1.1.so.o
ora io ho installato la versone 1.2 ma lui non
l'accetta. qualcuno mi sa dire come configurarlo?
grazie
=
I cristiani possono sposare una sola donna. La si chiama monotonia.
Robert Lembke
Being a little behind in my email, I've just read your post.
I'm using this card under LM 8.1, the ATI page says it will only work as a
graphics adapter, but I've read (somewhere) that someone was able to get the
TV in/out to work though it's supposed to be somewhat involved.
Haven't found
Curt Tresenriter wrote:
Being a little behind in my email, I've just read your post.
I'm using this card under LM 8.1, the ATI page says it will only work as a
graphics adapter, but I've read (somewhere) that someone was able to get the
TV in/out to work though it's supposed to be somewhat
Yes, you are right, I just thought there may be a way to do it cleanly,
you know, like showing up in the boot up messages... BTW: is this behaviour
supposed to be like that or do we have a bug here? Did really nobody have this
same problem?
Thanks, Lee
There may be a better way, but, you could
Dear All,
I tried to install Linux Mandrake 8.0 into my old server (HP Netserver
LC/100) with Adaptec AIC-7770 installed on the motherboard. I can't complete
the instalation because the Mandrake always ask me the parameters on
aic7xxx.o line command...
Is there anyone who can help me finish the
Dave Sherman wrote:
If you wanted to do that, you would be asking Apache to ignore the basic
*nix filesystem rules, which I don't think is possible. The server would
have to calculate every possible upper/lower case combination for each
directory and file a user might request, and that would
hi
how do i set up ics without dhcp?
basically, each pc on the lan already has an ip with mapped drives to each
other and the machine with the modem has 2 hd.one windows and one linux and
i pull the power from one to the other to boot my preferred OS.
ics is set up on windows but i wanna do that
AHAAA i found the solution!!
Error scenario: Internet Connection Sharing (which can be configured from
the Mandrake Control Center) will be setup correctly, but does not work
after rebooting the system.
Why: The default firewall configuration flushes the forwarding rules set up
at the beginning
I have the same problem
I've asked this list about 10 times, and it seems we are alone and no one
ever has ever heard of such a thing..
- Original Message -
From: Pascal Goguey [EMAIL PROTECTED]
To: Newbie [EMAIL PROTECTED]
Sent: Monday, January 14, 2002 5:39 PM
Subject: [newbie] Web
Mario,
Thanks for your response!
Mario Michael da Costa wrote:
Before burning the cd's you run the MD5 on an ISO image file. After
burning the cd's you are running MD5 on some of the files () on
the cd.
I think running md5sum /dev/cdroms/cdrom1 does the md5sum on the
entire CD, i.e.,
On Tuesday 15 January 2002 12:40, you wrote:
hi
how do i set up ics without dhcp?
basically, each pc on the lan already has an ip with mapped drives to each
other and the machine with the modem has 2 hd.one windows and one linux and
i pull the power from one to the other to boot my
Joe Wittmer wrote:
Hi Group,
I have LM version 8.1 installed this last week and choose to install the
wine package. However, I am unable to figure out how to get it working...
Joe, forget that Wine version that comes with 8.1 - I never could get it to
work. Go to the Codeweavers website:
Gidday all
I have Webmin 0.84 and Mandrake 8.0
When I go to Webmin https://192.168.1.1:1/useradmin/edit_user.cgi
(that's .../edit_user.cgi ) I get a page that shows me the heading and no form below
it to
enter new user information. (I seem to be able to do other things OK like add and
Andre Dubuc wrote:
My cdwriter is /dev/cdrom, and my CDROM is /dev/cdrom2.
Andre, try to change those to /dev/scd0 and /dev/scd1 respectively. For
a more in-depth explanation, read on :
I can play audio cd's, using CDPlayer in KDE, using only cdrom. If I change
the preferences in the
Its a pretty simple web page, and converting everything to lowercase would
be fine. How many people do you know specifiy different file names on a web
site by capitalization? Personally, I don't know any. I just wanted to
make sure that people can see the site even if they have a problem
After doing as Kaj advises then find the hidden file in your home directory
~/.kde/share/config/kscdrc and edit the line CDDevice=/dev/cdrom and change
it to /dev/scd1 You will then be able to play audio CD's on your Cdrom
derek
On Tuesday 15 January 2002 14:13, Kaj Haulrich wrote:
Andre
On Tue, 15 Jan 2002, Randy Kramer wrote:
%_Dave Sherman wrote:
If you wanted to do that, you would be asking Apache to ignore the basic
*nix filesystem rules, which I don't think is possible. The server would
have to calculate every possible upper/lower case combination for each
Hi Kaj,
Thanks for the info. I added the additional append.
My cdwriter is set in lilo, but I'm not clear how to set either to
/dev/scd0 and /dev/scd1 respectively.
From my understanding, the cdwriter already is seen as as ide-scsi device --
I use Gtoaster and it works beautifully.
How do
Hi derek,
Well, I did what Kaj suggested, and checked my kdsdrc file and it's already
set to /dev/scd1 -- still get ejected on the display.
Somehow, I think that I haven't set /dev/scd1 yet -- mainly because I don't
know how to do it.
Any ideas?
Tia, Andre
On Tuesday 15 January 2002
I'm afraid I may have misled you with my reply -- I should not have
inplied that Apache can convert a mixed case file name to all upper or
lower, I really meant to speak hypothetically -- if something else
converted the file name to all upper or lower case (or if something was
built into Apache
Gerald Waugh wrote:
If you take a look at the apache mod_speling (not a typo!) module, you can
configure your server to do that (so I have heard)
http://www.apache.org/docs/mod/mod_speling.html
Gerald,
Thanks -- I should have read this before I sent my last post!
Randy Kramer
Want to buy
Mario Michael da Costa wrote:
Randy Kramer wrote:
I've checked the md5sums after downloading, and also after burning
(using md5sum /dev/cdroms/cdrom1), but after burning the md5sums can
be different (for various reasons) without necessarily indicating a
problem. I burn my cds under
Andre Dubuc wrote:
Hi Kaj,
Thanks for the info. I added the additional append.
My cdwriter is set in lilo, but I'm not clear how to set either to
/dev/scd0 and /dev/scd1 respectively.
From my understanding, the cdwriter already is seen as as ide-scsi device --
I use Gtoaster and it
You need to follow the second part of Kaj's advice and edit your /etc/fstab
file to look like the example he gave.
/dev/scd0 /mnt/cdrom auto
user,iocharset=iso8859-1,umask=0,exec,codepage=850,ro,noauto 0 0
/dev/scd1 /mnt/cdrom2 auto
user,iocharset=iso8859-1,umask=0,exec,codepage=850,ro,noauto
Hi Derek,
Well, it works. I tried changing the preferences in Kcdplayer to /dev/scd0
(for the CDROM, which it should be according to the drive parameter hdb) --
it worked.
Now, why it wouldn't it do the same when listed as an IDE device
(/dev/cdrom)? Sigh . . .
Thanks for the help - fast
Hi everybody,
I got my problem with a 1996 bios and Lilo fixed by not using Lilo.
Installed Grub instead and it is happy.
Thanks to everyone who responded.
Larry
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Tuesday 15 January 2002 10:46, you wrote:
Andre Dubuc wrote:
Hi Kaj,
Thanks for the info. I added the additional append.
My cdwriter is set in lilo, but I'm not clear how to set either to
/dev/scd0 and /dev/scd1 respectively.
From my understanding, the cdwriter already is
Thanks Ron,
I had already installed codeweaver when receiving your post. I am most
interested in running a few communication applications... But, transgaming
does look very interesting and I appreciate the link very much.
Joe
Joe Wittmer wrote:
Hi Group,
I have LM version 8.1 installed
Greetings
I want to install a program (LinuxTrade) ... when I tried to install it, i
received a message that failed dependencies: curl is needed ...
so i downloaded curl and attempted to install it but received a message,
file /usr/lib/libcurl.so.2 from install of curl-7.9.2-1 conflicts
On Tue, 15 Jan 2002 14:18:38 +0800
SKLIM [EMAIL PROTECTED] wrote:
Hi!
How can I run fetchmail when each time I boot the server.
I am not configure the LinuxConf
How can I configure the fetchmail for enable to run each time I boot the server.
Best Regards,
SKLIM
If you have
"subscribe cristiano"
On Tue, 2002-01-15 at 11:27, Kenn Yahoo wrote:
Greetings
I want to install a program (LinuxTrade) ... when I tried to install it, i
received a message that failed dependencies: curl is needed ...
so i downloaded curl and attempted to install it but received a message,
file
Hi Group,
Thanks a bunch for all of the on and off-line responses. I am very pleased
to now be a part of such a good group.
I decided to try the codeweavers installation of wine. It was very easy to
use and while I think I could have managed the script file ok... The
graphic tool is very nice.
Title: Software raid install
I have just got a new 40 gig drive and would like to use it with my current 20 gig drive in a software raid0 configuration.
Does the installer support setting up software raids during the install, or do I have to set up the raid after installing mandrake to space
Hello Daniel
On 15-Jan-02, you wrote:
I have just got a new 40 gig drive and would like to use it with my
current 20 gig drive in a software raid0 configuration. Does the installer
support setting up software raids during the install, or do I have to set
up the raid after installing
Title: Software raid install
I have just got a new 40 gig drive and would like to use it with my current 20 gig drive in a software raid0 configuration.
Does the installer support setting up software raids during the install, or do I have to set up the raid after installing mandrake to space
first of all I apologise to people who have received this document several
times in HTML format, I was sending from work and could not get outgoing
external mail to be sent in plain text.
On to the original question.
I have just got a new 40 gig drive and would like to use it with my
On Tue, 15 Jan 2002, [EMAIL PROTECTED] wrote:
snip
I have just got a new 40 gig drive and would like to use it with my current 20
gig drive in a software raid0 configuration.
Does the installer support setting up software raids during the install, or do
I have to set up the raid after
Hi.
I've got Mandrake 8.1 and Win 2k on my computer. I use Mandrake's LILO to
choose which OS I want to use.
I used Partion Magic to resize my partitons. Now LILO wont start up. All I
get is LIL- and then nothing
Any ideas on how I can get LILO working again?
Want to buy your Pack
This mail from the archive offers good advice on setting up software RAID in
Mandrake
http://www.mail-archive.com/newbie@linux-mandrake.com/msg79668.html
derek
On Tuesday 15 January 2002 21:01, [EMAIL PROTECTED] wrote:
first of all I apologise to people who have received this document
Not sure how to get you going again, but I can tell you what the 'LIL' means.
Check out
http://linux-embedded.com/howto/Bootdisk-HOWTO-12.html
derek
On Tuesday 15 January 2002 21:07, you wrote:
Hi.
I've got Mandrake 8.1 and Win 2k on my computer. I use Mandrake's LILO to
choose which OS
I've been playing with Apache and am able to access my machine by typing in
the IP address in a browser. I am connected to RoadRunner by a cable modem.
RR uses DHCP, so my IP could theoretically change. I named the machine
NAME.columbus.rr.com, which I found from winipcfg (when I still had
On Tuesday 15 January 2002 15:07, you wrote:
Hi.
I've got Mandrake 8.1 and Win 2k on my computer. I use Mandrake's LILO to
choose which OS I want to use.
I used Partion Magic to resize my partitons. Now LILO wont start up. All
I get is LIL- and then nothing
Any ideas on how I can
Daniel Olynsma (ENZ) wrote:
I have just got a new 40 gig drive and would like to use it with my
current 20 gig drive in a software raid0 configuration.
Does the installer support setting up software raids during the
install, or do I have to set up the raid after installing mandrake to
On Tue, 15 Jan 2002 16:09:52 -0200
Cristiano Torres [EMAIL PROTECTED] wrote:
subscribe cristiano
See http://www.linux-mandrake.com/en/flists.php3 to subscribe, note the
address :)
-Frans
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
A static ip and registered domain name are necessary to create an address
record in DNS. Your isp can handle this. See if they have that as a
service. Of course they'll charge extra to set it up, etc
At 09:30 PM 1/15/2002, you wrote:
I've been playing with Apache and am able to access
Daniel Olynsma (ENZ) wrote:
I have just got a new 40 gig drive and would like to use it with my
current 20 gig drive in a software raid0 configuration.
Does the installer support setting up software raids during the install,
or do I have to set up the raid after installing mandrake to
On Tue, 2002-01-15 at 15:30, Todd Slater wrote:
I've been playing with Apache and am able to access my machine by typing in
the IP address in a browser. I am connected to RoadRunner by a cable modem.
RR uses DHCP, so my IP could theoretically change. I named the machine
I have 8.0 on a Dell Laptop. Suddenly, on shutdown the computer locks up on
this:
Shutting down interface eth0: dhcpcd[784]: terminating on signal 1
It just sits there. I have to power off the computer and then it has to
check the filesystem on bootup.
Any idea what's wrong? It's a Etherlink
Domain Suggestion. You're using Road Runner and about every month,
month and a half your ip address will change. Due to ATT's ever
expaning cable network.I use dyndns.org for my domain forwarding if
that's what you call it.
You can use a third party to check your ip address every 5 minutes or
Barb wrote:
I have 8.0 on a Dell Laptop. Suddenly, on shutdown the computer locks up
on this:
Shutting down interface eth0: dhcpcd[784]: terminating on signal 1
Try shutting it down manually while you are logged in..
ifconfig eth0 down
then check /var/log/messages if it freezes..
and
Hello all,
This is my first attempt of installing Mandrake. I used to use RH (since
6.1) until I could not get 7.2 to work. I believe this problem is the same
one I had with RH 7.2
I have installed Mandrake 8.1 with no problems what so ever. Very nice GUI
also!
System it is installed on:
Dave Sherman wrote:
[EMAIL PROTECTED]">
On Tue, 2002-01-15 at 15:30, Todd Slater wrote:
I've been playing with Apache and am able to access my machine by typing inthe IP address in a browser. I am connected to RoadRunner by a cable modem.RR uses DHCP, so my IP could theoretically
On Wednesday 16 January 2002 00:47, you wrote:
I have 8.0 on a Dell Laptop. Suddenly, on shutdown the computer locks up on
this:
Shutting down interface eth0: dhcpcd[784]: terminating on signal 1
It just sits there. I have to power off the computer and then it has to
check the filesystem
make a linux boot disk, this will get you back to linux after you wipe out
the mbr using a win/dos boot disk and type ...-let me get this right, either
'fdisk /mbr' or 'format /mbr' i think it's the former because it's odd that
it isn't a switch to the latter, did you mean that win doesn't see
59 matches
Mail list logo