Ciao Ferdinando alle 17:48, domenica 26 maggio 2002, hai scritto:
cut
Cerca di fare lo stesso test
anche sotto win e controlla se non vede le stesse locazioni.
Ci sto' provando.
Sempre per quanto riguarda win, c'è da considerare che è lo stesso sistema
che si incarica di gestire tutta la
On Mon, 27 May 2002 18:33:40 +0200
[EMAIL PROTECTED] wrote:
Perché ogni tanto qualcuno decide di rompere le scatole a tutta la lista,
sfoggiando un pessimo inglese, per rimuoversi?
E` di per se evidente che ci debba essere un meccanismo separato: se su
una ML grossa, diciamo qualche migliaio di
Cari amici,
quale
scheda tv mi consigliate per vedere i mondiali con linux,
e poter registrare anche la finale?
Grazie a presto
P.S. Ho una xtreme 98 non riesco a farla funzionare con il
pinguino
Puoi anche rinunciare, tanto dipende dal sito (si vede solo con Explorer).
Prova a fare come ho fatto io, cioè mandagli una e-mail dicendo che non
esiste solo Explorer e che se vogliono continuare ad avere cienti, in
generale, è meglio che si tengano aggiornati e non facciano fare i siti a chi
unsubscrive
Cari amici,
quale
scheda tv mi consigliate per vedere i mondiali con linux(possibilmente
compatibile al 100% con MDK82) , e poter registrare anche la finale?
Grazie a presto
P.S. Ho una xtreme 98 non riesco a farla funzionare con il
pinguino
E' possibile visualizzare al boot di lilo nomi più dettagliati per
ciascun sistema da avviare senza dover sottostare al limite delle label
in lilo.config ?
Saluti da Giuseppe.
Il mar, 2002-05-28 alle 10:32, Germano ha scritto:
Puoi anche rinunciare, tanto dipende dal sito (si vede solo con Explorer).
Prova a fare come ho fatto io, cio mandagli una e-mail dicendo che non
esiste solo Explorer e che se vogliono continuare ad avere cienti, in
generale, meglio
Ho cancellato per sbaglio le precedenti mail, qual il tuo problema?
Da quel che ho potuto capire dal file di log vedi il desktop a 640x480, giusto?
(II) RADEON(0): Not using default mode "700x525" (hsync out of
range)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
Ciao a tutti,
ho una radeon ve con tv out, qualcuno saprebbe dirmi come fare ad usare
l'uscita tv?
Grazie a tutti ENx
On Tuesday 28 May 2002 11:48, Giuseppe Ferruzzi, talkin' about
[newbie-it] lilo.conf wrote:
E' possibile visualizzare al boot di lilo nomi più dettagliati per
ciascun sistema da avviare senza dover sottostare al limite delle
label in lilo.config ?
ehm, cambiare le label nel lilo.conf?
(non
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Il 17:48, martedì 28 maggio 2002, in merito a [newbie-it]
lilo.conf, Giuseppe Ferruzzi ha scritto:
E' possibile visualizzare al boot di lilo nomi più
dettagliati per ciascun sistema da avviare senza dover
sottostare al limite delle label in
Salve,
mi rivolgo nuovamente alla ML per una problema che mi affligge da sempre
(almeno con Linux), ovvero il non riuscire ad utilizzare il sintonizzatore TV
con Linux. Come da oggetto la mia sk video e' una Voodoo3 3500TV.
Come posso fare?
--
Vincenzo TheJack Tiziani
www.stargazer.it
Title: Message
To
what?
-Original Message-From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On
Behalf Of alexSent: Monday, May 27, 2002 10:08 PMTo:
[EMAIL PROTECTED]Subject: [newbie]
subscription
Brian Koppe wrote:
Hello everyone,
I just reinstalled Linux this past weekend using ext3 and just began to
reinstall Quake 3 Arena. So, I open up the manual and so as it says -
go to /mnt/cdrom and then sh setup.sh Now, I know this works because,
well, I've done it twice before - using
On Tue, 28 May 2002 15:12, Sridhar Dhanapalan wrote:
On Mon, 27 May 2002 20:46:01 -0600 (MDT), Jim Turner
[EMAIL PROTECTED] wrote:
Someone else here may be better qualified to answer about how big each
partition should be; but then, it really depends on what you want to do
anyway. I
Can someone who is running Mandrake 8.2 PPC on an original Power Macintosh
G3 Desktop tell me whether you have successfully configured the built in
ethernet card? I am trying to determine whether this ethernet card is
supported or whether I've got an issue with my setup...
The Power Mac G3
On Tuesday 28 May 2002 02:37, Nicolas VERITE wrote:
USB is for photos and the MPEG low quality videos,
FireWire (or iLink) is made for DV video.
Ah, all is now clear! So I can, in theory, get my camcorder to
stream crappy video through the USB port, but if I want to do
anything serious, I
On Monday 27 May 2002 10:12 pm, Carroll Grigsby wrote:
Gerald:
I got the same rpm from www.rpmfind.net; it worked fine for me. What KDE
are you running?
-- cmg
I am using KDE 2.2.1-7 It installed with my Mandrake 3 CD set.
I found this URL for the rpm, but it won't download.
How do I access the DOD emulator? Or, for that matter, does Mandrake 8.2 even
COME with one?
On a happier note, I managed to get something to install! Now I get to try it
again with somethingthat's actually USEFUL.
I can't wait 'till I can build my dream system!
Iceburgh69
Want to buy
nope no need to mount anything. do you dual boot? does it work under windows?
what Mobo and chipset do you have (known problems with Ali and via chipsets,
and pci tv cards)
On Monday 27 May 2002 10:57 pm, you wrote:
I have already changed this settings but Im unable to watch tv.
Do I have
Robin Turner wrote:
On Tuesday 28 May 2002 02:37, Nicolas VERITE wrote:
USB is for photos and the MPEG low quality videos,
FireWire (or iLink) is made for DV video.
Ah, all is now clear! So I can, in theory, get my camcorder to
stream crappy video through the USB port, but if I
Anyone know if there's drivers for a Voodoo3 3500TV? Specifically, what
programs would be used to watch TV using the video input feature of that
card?
Thanks
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Tuesday 28 May 2002 1:57 am, Brian Parish wrote:
A friend running LM8.2 has a Canon S200SP printer. PrinterDrake sees
it as a BJC-240. It prints fine, but is very grey - like draft quality
all the time. Anyone having success with this printer?
cheers
Brian
I do not have a Canon
On Tuesday 28 May 2002 2:26 am, Gary K Stinnett Jr wrote:
Looking for help when installing cisco aironet 350 PCI wireless network
card.
When installing and configuring help page from cisco says to type sh
./kpciinstall but I do not see or have that file to my knowledge. I have
tried to use
Hello,
Could someone tell me how to add/use my Gravis blackhawk digital
joystick in Mandrake 8.2 , it is connected through my Creative 128 sound
card.
Thankyou,
Rodney
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Tuesday 28 May 2002 04:14 am, Chris Ames wrote:
How do I access the DOD emulator? Or, for that matter, does
Mandrake 8.2 even COME with one?
Cut'n paste this line,
file:/usr/share/doc/HOWTO/HTML/en/DOSEMU-HOWTO.html
into a browser and hit Enter --or-- on your main menu,
On Monday 27 May 2002 08:06 pm, Brian Koppe wrote:
Ok - weird. I decided, just going on a limb, to switch the disc
from my CD-RW to my DVD-ROM. Now I can read it just fine - with
setup.sh and all. However, the interesting part is that I don't
see the files I see when I read it with my
Did anybody of you install netatalk on your Mandrake Distro?
I downloaded the source code from www.anders.com/projects/netatalk, followed
the instructions and after the first make command I got the following
errors:
/usr/lib/libwrap.a(hosts_access.o): In function `host_match':
I use the Cisco Aironet Wireless card on my laptop here at work, and the
only thing I had to do to get it to work was to simply plug it in .. it
automatically loaded the appropriate drivers and installed the necessary
kernel module to be able to access it. I didn't even have to go to
Cisco's
I just downloaded and installed the latest nvidia drivers, but im still
having problems loading up glx on my computer. Anyone had any similar
problems with nvidia drivers?
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Monday 27 May 2002 01:20 pm, you wrote:
Hey Darklord, Getting ready to have some ribs over here in Gas Fork
holler.
Randy
You woof-woof, I love bar-b-que ribs grin
Well...eat 3 for me... ;-)
--
/\
On Tuesday 28 May 2002 4:18 pm, Tim Ford wrote:
I just downloaded and installed the latest nvidia drivers, but im still
having problems loading up glx on my computer. Anyone had any similar
problems with nvidia drivers?
A few thoughts for you to check out:-
Look in
Yes, it works under windows. what is Mobo?
I think brooktree is the Chipset, and is a pci tv card.
You Wrote:
--
nope no need to mount anything. do you dual boot? does it work under windows?
what Mobo and chipset do you have (known problems with Ali and via chipsets,
and pci tv cards)
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I would like to remove any garbage from my x config file, where should I start
to see what configuratio is actualy used by my computer ?
Bye the way, I'm getting this error: INIT: ld 'x' respawning too fast:
disabled for 5 minutes.
Do you know what
Hi,
How do I configure my soundcard on Mandrake 8.0 ?
Thnx,
spyross
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Tuesday 28 May 2002 07:04 am, Pupeno opened a general hailing frequency
and transmitted to all open stations:
Bye the way, I'm getting this error: INIT: ld 'x' respawning too fast:
disabled for 5 minutes.
any of a number of things. i have seen that because the default manager
(usually
On Tuesday 28 May 2002 17:19, daRcmaTTeR wrote:
On Tue, 28 May 2002, Pupeno wrote:
-pgpenvelope processed message
I would like to remove any garbage from my x config file, where
should I start to see what configuratio is actualy used by my
computer ? Bye the way, I'm getting this
On Monday 27 May 2002 21:15, you wrote:
On Monday 27 May 2002 10:55 am, Misael M. wrote:
I have a Brooktree Tv card but I cant watch tv in my linux box.
xawtv does not found any channel.
Does anyone know how to fix this?
thanks
try scantv or look for their site for a config template
On Tuesday 28 May 2002 08:55 am, you wrote:
snip
Some CD-RW drives (eg, Plextor, Yamaha) are known to work well
with even poor media. Other drives (eg, Sony, HP) are know to be
more fussy. 'Bout all you can do to minimize these situations is thru
trial'n error, find media that works
On Tue, 2002-05-28 at 05:14, Chris Ames wrote:
How do I access the DOD emulator? Or, for that matter, does Mandrake 8.2 even
COME with one?
On a happier note, I managed to get something to install! Now I get to try it
again with somethingthat's actually USEFUL.
I can't wait 'till I
On Monday 27 May 2002 09:39 pm, you wrote:
snip
Anyone able to help?
Thanks
Brian
Brian, I had that same signal 11 exiting problem with my version of Q3 (full
commercial Linux version from Loki Software).
I followed this link, d/led this file (its big, like 26-27 megs) installed
it, and
On Tuesday 28 May 2002 18:05, daRcmaTTeR wrote:
On Tue, 28 May 2002, Robin Turner wrote:
On Tuesday 28 May 2002 17:19, daRcmaTTeR wrote:
On Tue, 28 May 2002, Pupeno wrote:
-pgpenvelope processed message
I would like to remove any garbage from my x config file,
where
On Tue, 28 May 2002, Robin Turner wrote:
On Tuesday 28 May 2002 18:05, daRcmaTTeR wrote:
On Tue, 28 May 2002, Robin Turner wrote:
On Tuesday 28 May 2002 17:19, daRcmaTTeR wrote:
On Tue, 28 May 2002, Pupeno wrote:
-pgpenvelope processed message
I would like to remove
Derek Jennings wrote:
On Monday 27 May 2002 4:58 pm, you wrote:
Have you used webmin to make sure Micky is a 'normal' user and the password
is set to the same as the Linux password?
(Of course it is case sensitive)
Yes - I checked, and I have re-entered a 'new' password, just to make
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Does anyone have any good FAQ links for the Mandrake SNF 7.2 build,
other than the one on Mandrake's site?
Also, I have a problem with the firewall itself. I have the firewall
setup in the diagram attached. I have static routes in the init.rc
On Tuesday 28 May 2002 12:41 pm, you wrote:
Does anyone have any good FAQ links for the Mandrake SNF 7.2 build,
other than the one on Mandrake's site?
Also, I have a problem with the firewall itself. I have the firewall
setup in the diagram attached. I have static routes in the init.rc
On Tuesday 28 May 2002 12:41 pm, you wrote:
Does anyone have any good FAQ links for the Mandrake SNF 7.2 build,
other than the one on Mandrake's site?
Also, I have a problem with the firewall itself. I have the firewall
setup in the diagram attached. I have static routes in the init.rc
Hello all,
I'm considering either Mandrake 8.2 or YDL 2.2, and am hoping someone here
can help with some questions.
On YDL's web site, they suggest placing Linux and Mac OS 9 on separate disks,
and making the drive with YDL the master on the IDE bus.
Is this also recommended for Mandrake?
These are great basic newby questions and I'd like to know the answers too.
Please keep a notebook of why you're making certain decisions as you go
along and let us all read it as you go along.
What mac system and hardware are you running?
d
Hello all,
I'm considering either Mandrake 8.2 or
On Tuesday 28 May 2002 02:04 am, Gerald Waugh opened a general hailing
frequency and transmitted to all open stations:
I am using KDE 2.2.1-7 It installed with my Mandrake 3 CD set.
I found this URL for the rpm, but it won't download.
What mac system and hardware are you running?
A blue/white G3 currently, but I may trade up to a G4 since my G3 has the
Rev 1 IDE chip and can't support a 2nd drive on the internal IDE bus.
I can't use an IDE card, because I wouldn't be able to boot from the drive
connected to it.
Jeff
Want
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Yes. The ETH interfaces are the gateways for the respected LAN
segments. I do have RIPv2 running on the network and all of the
routers see the other subnets. Like I said, I can SSH into the
firewall from the IP Address 192.168.150.1, do what I
I've been running a dual-boot Mandrake 8.2/Windows system since 8.2 became
available. Today, I had to upgrade/replace my old video card because it has
gone bad (GeForce 2 with an ATI Radeon 8500.) I'm using a stock kernel and
without the NVIDIA 3GL drivers installed, I do not startx at boot
I'm running Powerbook G3/400, system 9.2.2 with 128 meg ram and 6 gig
internal. I have a backup of 20 gig on the firewire.
I can add another firewire drive but want to avoid that expense if possible.
My objectives for going to Linux are:
1) It's open source.
2) It's more robust;
3) It is more
On Tue, 28 May 2002 13:07:05 -0700
Joe Sotham [EMAIL PROTECTED] wrote:
I've been running a dual-boot Mandrake 8.2/Windows system since 8.2
became available. Today, I had to upgrade/replace my old video card
because it has gone bad (GeForce 2 with an ATI Radeon 8500.) I'm using
a stock
On Tue, 2002-05-28 at 17:44, shane wrote:
On Tuesday 28 May 2002 02:04 am, Gerald Waugh opened a general hailing
frequency and transmitted to all open stations:
I am using KDE 2.2.1-7 It installed with my Mandrake 3 CD set.
I found this URL for the rpm, but it won't download.
boy I don't know if stuff has changed or what, but used to be SINGLE Network
firewall mean only one lan and one external interface no wonder you have a
problem with SINGLE NETWORK on MULTIpul eth interfaces... have you ever
considered useing only eth0 for the inside lan as the gateway
Just wondering - seems like I read this somewhere before...is there a bug in
the drag 'n drop filecopy to an open floppy window under KDE with v8.2? The
reason I'm asking is - I did it, from an window on /home/darklord to an open
window on /mnt/floppy and I got a complete and total system
May 28, 2002 02:07 pm,Joe Sotham wrote:
I've been running a dual-boot Mandrake 8.2/Windows system since 8.2 became
available. Today, I had to upgrade/replace my old video card because it
has gone bad (GeForce 2 with an ATI Radeon 8500.) I'm using a stock kernel
and without the NVIDIA 3GL
On Tuesday 28 May 2002 23:44, you wrote:
I've been running a dual-boot Mandrake 8.2/Windows system since 8.2
became available. Today, I had to upgrade/replace my old video card
because it has gone bad
Just for curiosity: How do you recognize a video card going bad? Lines on the
screen,
Anuerin G. Diaz wrote:
hi femme,
again i would like to ask for your help. i already posted this to the
local LUG but have not received any reply for the past two days and i
sort of need this while i have the free time. thanks...
=
to the list members,
On Tuesday 28 May 2002 5:40 pm, Anne Wilson wrote:
Derek Jennings wrote:
On Monday 27 May 2002 4:58 pm, you wrote:
Have you used webmin to make sure Micky is a 'normal' user and the
password is set to the same as the Linux password?
(Of course it is case sensitive)
Yes - I checked,
mobo= MOtherBOard, chipset is the chip used as controllers on the MoBo, ALi
Is Acer labs, Via is VIA technoldeges, Intel you know, Brooktree is the
chipset (and drivers) for the Video card.
On Tuesday 28 May 2002 09:37 am, you wrote:
Yes, it works under windows. what is Mobo?
I think
Derek Jennings wrote:
On Tuesday 28 May 2002 4:18 pm, Tim Ford wrote:
I just downloaded and installed the latest nvidia drivers, but im still
having problems loading up glx on my computer. Anyone had any similar
problems with nvidia drivers?
A few thoughts for you to check out:-
Look in
Charlie writes:
May 28, 2002 02:07 pm,Joe Sotham wrote:
I've been running a dual-boot Mandrake 8.2/Windows system since 8.2 became
available. Today, I had to upgrade/replace my old video card because it
has gone bad (GeForce 2 with an ATI Radeon 8500.) I'm using a stock kernel
and without
On Tue, 28 May 2002, Spyros Spyropoulos wrote:
Hi,
How do I configure my soundcard on Mandrake 8.0 ?
Thnx,
spyross
hmmm...lets see if I can remember that far back. I haven't seen 8.0 for a
few years, so if I get this wrong, please someone correct me. at any rate
Spyros, you can
On Tuesday 28 May 2002 04:30 pm, Robin wrote:
On Tue, 2002-05-28 at 17:44, shane wrote:
On Tuesday 28 May 2002 02:04 am, Gerald Waugh opened a general hailing
frequency and transmitted to all open stations:
I am using KDE 2.2.1-7 It installed with my Mandrake 3 CD set.
I found this
- Original Message -
From: Brian Parish [EMAIL PROTECTED]
To: newbie [EMAIL PROTECTED]
Sent: Tuesday, May 28, 2002 6:47 PM
Subject: Re: [newbie] accesss shareing
On Wed, 2002-05-29 at 13:13, [EMAIL PROTECTED] wrote:
I was trying to share my cable connection in win2000 sstem(which
Thank,s Brain,I made the changes still no contection I haven,t got much time
in with linux GREEN-GREEN and you lost me on checking with the
/ect/resolv.config didn,t understand were to do it.
- Original Message -
From: Brian Parish [EMAIL PROTECTED]
To: newbie [EMAIL PROTECTED]
Sent:
On Tuesday 28 May 2002 07:22 pm, et opened a general hailing frequency and
transmitted to all open stations:
On Monday 27 May 2002 11:31 pm, you wrote:
On Monday 27 May 2002 07:07 pm, alex opened a general hailing frequency
and
transmitted to all open stations:
one hell of an
On Wed, 2002-05-29 at 15:02, [EMAIL PROTECTED] wrote:
Thank,s Brain,I made the changes still no contection I haven,t got much time
in with linux GREEN-GREEN and you lost me on checking with the
/ect/resolv.config didn,t understand were to do it.
From a console, type:
cat /etc/resolv.conf
I now have alsa 0.9.rc1 under 8.2 playing nicely with my Delta 66
multi-channel card and XMMS is doing it's thing faultlessly for 16 hours
or so per day.
BUT
This seems to have been at the cost of tuxracer, chromium and probably
other apps that use 3d acceleration. These worked albeit without
When I try installing wine from an rpm, I get the following error:
installing binary packages
file /usr/bin/expand from install of wine-cvs-unstripped-052802-1 conflicts
with file from package textutils-2.0.17-7mdk.
As a result, wine will not install.
I am running Mandrake 8.2 download
mike wrote:
When I try installing wine from an rpm, I get the following error:
installing binary packages
file /usr/bin/expand from install of wine-cvs-unstripped-052802-1 conflicts
with file from package textutils-2.0.17-7mdk.
As a result, wine will not install.
I am running
I quess this is what it should do but most everthing else ask for root but
konsole,choose root console and does nothing ,logout and login as root
screen turn,s red then warning about this is a bad ideal.I stop and got out
there to unsure.
- Original Message -
From: Brian Parish [EMAIL
From a reliable source:
On Tue, 2002-05-28 at 15:15, [EMAIL PROTECTED] wrote:
Hello all,
I'm considering either Mandrake 8.2 or YDL 2.2, and am hoping someone here
can help with some questions.
On YDL's web site, they suggest placing Linux and Mac OS 9 on separate disks,
and making
77 matches
Mail list logo