Hello
I have a mail server currently running EIMS (Eudora Internet Mail
Server, a descendent of the Apple Internet Mail Server) running on a
Macintosh. I'm keen to migrate to Qmail. The one box currently serves
as inbound mta, outbound mta, and pop3 server.
Has anyone else ever done this?
Asked earlier here about virus scanning and qmail, regarding how to set it
up so that i can define in some way which of the domains that should be
scanned. People said that i could use the qmail-scanner (with some
modifications..). The problem is that im not really that good in perl so i
wont
I'm new to Linux and new to qmail I never post to that list before.
installed qmail on RedHat7 following LWQ:
qmail-1.03.tar.gz + qmail-103.patch
ucspi-tcp-0.88.tar.gz
daemontools-0.70.tar.gz
checkpassword-0.81.tar
Everything looks fine but...
When I send mail typing form shell:
# mail bob
mail
I'm using AMaVis, which works as replacing the original qmail-local and
qmail-remote. I think that you could try to put the scanner script in the
delivery instruction of the domains you want scanned, instead of replacing
qmail-remote and local
Regards, Milen
Asked earlier here about virus
On Mon, 12 Feb 2001 14:49:37 -0600, Charles Cazabon wrote:
Am I right in think qmail-smtpd will never give this error?
Yes. However, it should be noted that servers which do return this error
are revealing valuable information -- spammers can use this technique to
build a list of valid email
On Mon, Feb 12, 2001 at 11:47:38PM -0500, Peter Cavender wrote:
I just installed the latest ucspi-tcp from the tarball on cr.yp.to, and
there are no man pages. My previous install almost 2 years ago included
them, and I am wondering if they are no longer included or if I missed
something.
The mail program looks for message in /var/spool/mail/USERNAME and qmail
works with Maildir.
In qmail.org site there is link to a patched version of pine, so I can read
messages from maildir.
- Original Message -
From: "INSOMNIA - Janusz Oles" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
qmail Digest 13 Feb 2001 11:00:01 - Issue 1274
Topics (messages 57029 through 57110):
qmail-scanner + qmail-rewrite
57029 by: Michel Boucey
Problem with qmail+vpopmail and suggested fix
57030 by: Alex Povolotsky
57051 by: Alex Pennace
57058 by: Alex
W dniu Mon, Feb 12, 2001 at 03:54:38PM -0500, Dave Sill wystuka(a):
I had concurrencyremote set to 40, but with this setting it blocked my queue
for several hours! (some of receipments are very far from me), so i switched
to 120 and it's better because queue is blocked for 30 minutes at most,
Hi list:
I have this problem: one server running sendmail receives mail to a
user. The account isn't local so sendmail try to inject to the
destination MX host. The destination says "user unknown".
That's the log from sendmail:
Feb 12 19:40:51 cocoliso sendmail[19265]: f1CIeni19265:
from=[EMAIL
Ari Arantes Filho [mailto:[EMAIL PROTECTED]] wrote:
The mail program looks for message in /var/spool/mail/USERNAME and qmail
works with Maildir.
In qmail.org site there is link to a patched version of pine, so
I can read messages from maildir.
Yes. but I don't use pine (if there'll be no
On 13 Feb 2001 12:59:43 +0100,
INSOMNIA - Janusz Oles [EMAIL PROTECTED] wrote:
Yes. but I don't use pine (if there'll be no other solution I will).
I need different way out then pine, I would like to be able to check
mail (let's say form Outlook, which is installed on other computer
running
* INSOMNIA - Janusz Oles [EMAIL PROTECTED] [010213 06:58]:
Ari Arantes Filho [mailto:[EMAIL PROTECTED]] wrote:
The mail program looks for message in /var/spool/mail/USERNAME and
qmail works with Maildir. In qmail.org site there is link to a
patched version of pine, so I can read messages
On Tue, Feb 13, 2001 at 10:45:20AM +1100, dennis wrote:
Hi all..
Can anyone suggest an authentication scheme for courier-imap when using
qmail-ldap ?
How should I compile authentication into ciourier if qmail-ldap is going to
handle authentication via ldap ?
You are on the wrong list,
+ "J.J.Gallardo" [EMAIL PROTECTED]:
|
|Connected_to_202.108.44.214_but_sender_was_rejected./Remote_host_said:_550_:_Invalid_User/
|
| Why there is a field ""from "" empty here? Is my qmail machine
| sending emails with this field empty?
That's an envelope sender , not something in a header
On Tue, Feb 13, 2001 at 01:57:53PM +1100, dennis wrote:
Hi all...
I was hoping to ask for assistance with a "very simple" plan of attack on
setting up my new qmail server.
My requirements.
qmail
qmail-ldap (authentication)
courier-imap
courier-pop3
sqwebmail
[...]
Am I making any
Robert Sander [mailto:[EMAIL PROTECTED]] wrote:
Then You have to setup an IMAP-Server, look for courier-imap
Thanx, for advice,
I will, can you tell me where can I get a courier-imap tar boll
from and which one is right for redhat7.
/Janusz Oles
On Tue, Feb 13, 2001 at 05:03:35PM +0530, Harsha P. R wrote:
Is there a good IDE for C/C++ development so that we can debug /trace/ step
thru C code on Linux similar to the IDEs we have on Windows?
You might want to take a look at Source Navigator and Insight (a source
browser/IDE and a GUI
Robin S. Socha [mailto:[EMAIL PROTECTED]] wrote:
Subject: Re: How to get them out of Maildr?
Then you should set up a mailserver on that machine. qmail-pop3d is
maildir-aware as is, e.g., Courier IMAP which I highly recommend.
You should read (actually, you should have read already) Dave
Hello,
I am just curious will this work on OpenBSD 2.8?
or will I have to add them with my editor.
from INSTALL.ids
FreeBSD 2.2:
# pw groupadd nofiles
# pw useradd alias -g nofiles -d /var/qmail/alias -s /nonexistent
# pw useradd qmaild -g nofiles -d /var/qmail -s /nonexistent
# pw useradd
On Tue, Feb 13, 2001 at 05:43:03AM -0800, Rick Updegrove wrote:
Hello,
I am just curious will this work on OpenBSD 2.8?
or will I have to add them with my editor.
from INSTALL.ids
The commands mentioned in the linux section are working for OpenBSD.
--
Henning Brauer | BS Web Services
On Tue, Feb 13, 2001 at 05:43:03AM -0800, Rick Updegrove mumbled:
Hello,
I am just curious will this work on OpenBSD 2.8?
or will I have to add them with my editor.
from INSTALL.ids
Yes, they will work. However you must change the shell from
'/nonexistent' to '/sbin/nologin'
I'm unsure
Hi,
I'm trying to setup a Qmail server. I need it to accept mail for
hostmaster@.* without any configuration for new hosts.
Example:
I configure the DNS to answer querys for domain test.com.
I put up mx records for test.com to point to the qmailserver.
I send a mail to [EMAIL PROTECTED] and I
On Tue, Feb 13, 2001 at 05:43:03AM -0800, Rick Updegrove wrote:
| Hello,
| I am just curious will this work on OpenBSD 2.8?
| or will I have to add them with my editor.
| from INSTALL.ids
|
| FreeBSD 2.2:
|
| # pw groupadd nofiles
|
| # pw useradd alias -g nofiles -d /var/qmail/alias -s
On Tue, Feb 13, 2001 at 03:08:52PM +0100, Fredrik Steen wrote:
Hi,
I'm trying to setup a Qmail server. I need it to accept mail for
hostmaster@.* without any configuration for new hosts.
Example:
I configure the DNS to answer querys for domain test.com.
I put up mx records for test.com to
Tom Hoover [EMAIL PROTECTED] wrote:
The problem is this...every few days, ariel cannot connect to ezekiel.
[...]
So, whatever is happening is a problem on ariel, which prevents it from
_connecting_ to the SMTP port on ezekiel (neither qmail nor telnet can
connect). Whatever it is will
Jesse Reynolds [EMAIL PROTECTED] wrote:
The first big issue that is on my mind is the "percent hack" for
virtual domains. EIMS implements virtual domains for pop3 in an
interesting manner... a user who's email address is, say,
"[EMAIL PROTECTED]" will have to enter the following as his
Hey,
I've recently started using rblsmtpd with /etc/tcp.smtp.cdb listing the
IPs I don't care to receive mail from. Seems to work ok (I don't receive
nearly as much spam as I use to).
There's something I still can't find however. Does rblsmtpd leave a trace
anywhere of the mail it rejects ?
On Tue, Feb 13, 2001 at 03:15:27PM +0100, Peter van Dijk wrote:
| On Tue, Feb 13, 2001 at 03:08:52PM +0100, Fredrik Steen wrote:
| Hi,
|
| I'm trying to setup a Qmail server. I need it to accept mail for
| hostmaster@.* without any configuration for new hosts.
| Example:
| I configure the
On Tue, Feb 13, 2001 at 03:44:20PM +0100, Fredrik Steen mumbled:
|
| I'm trying to setup a Qmail server. I need it to accept mail for
| hostmaster@.* without any configuration for new hosts.
Umm.. I think you are making it harder than what it really is. If the
qmail server is setup to
Hi All,
I am working on installing amavis for scanning inbound/outbound emails with
NAI's Virus Scan engine. I have a question, in running the ./configure for
amavis,
it says it needs reformime (which is a part of the maildrop package). If I
compile
and install maildrop, does it
Hi,
Is there a good IDE for C/C++ development so that we can debug /trace/ step
thru C code on Linux similar to the IDEs we have on Windows?
The gdb debugger is quite laborious. I tried VIDE from
http://www.objectcentral.com/
But VIDE hangs very frequently
Regards,
Harsha
So, I've heard from several people that sympatico works fine for them.
Is there any other obvious explanation why a remote end would hang
after sending the DATA command and getting a 354 answer back?
Is there a way to force qmail to not accept an EHLO from a certain
host, requiring them to use
On Tue, Feb 13, 2001 at 04:02:47PM +0100, Martin Akesson wrote:
On Tue, Feb 13, 2001 at 03:44:20PM +0100, Fredrik Steen mumbled:
|
| I'm trying to setup a Qmail server. I need it to accept mail for
| hostmaster@.* without any configuration for new hosts.
Umm.. I think you are
Hello,
There is unix box running qmail with mysql-checkpassword, pop users
are on one uid and gid. POP3 is initialized like this:
/usr/local/bin/tcpserver -u 0 -g 0 0 pop3 /var/qmail/bin/qmail-popup-wrapper
where qmail-popup-wrapper is:
echo "POP3 connect from
On Tue, Feb 13, 2001 at 04:02:47PM +0100, Martin Akesson wrote:
On Tue, Feb 13, 2001 at 03:44:20PM +0100, Fredrik Steen mumbled:
|
| I'm trying to setup a Qmail server. I need it to accept mail for
| hostmaster@.* without any configuration for new hosts.
Umm.. I think you are
On Tue, Feb 13, 2001 at 04:02:47PM +0100, Martin Akesson wrote:
| On Tue, Feb 13, 2001 at 03:44:20PM +0100, Fredrik Steen mumbled:
| |
| | I'm trying to setup a Qmail server. I need it to accept mail for
| | hostmaster@.* without any configuration for new hosts.
|
| Umm.. I think you are
On Tue, Feb 13, 2001 at 06:49:16PM +0100, Fredrik Steen wrote:
[snip]
I need to do this because of the extra administration to add and to delete
domains that don't get approved at the nic. The people registrating
domains don't know that mush :). I have a "daemon" that manager
these files
* Fredrik Steen [EMAIL PROTECTED] [010213 15:08]:
I'm trying to setup a Qmail server. I need it to accept mail for
hostmaster@.* without any configuration for new hosts.
Example:
Is this possible?
Besides all the other notes that have been posted, you realize that this
means you'll never be
Hi All,
After installing reformime and tnef on my machine which runs qmail,
I was able to configure amavis-0.2.1 with the NAI anti-virus engine 4.1.20
from Network Associates, but in reading the qmail.README, and viewing
the output from ./configure --enable-qmail (listed below)
checking
Is there anybody out there can help me out?
What should I edit:
how about if I add couple of lines to /etc/rc.d/init.d/qmail
did anybod of you installed pop3d on redhat7?
maybe I should do some more editing somewhere else
how about run file in /var/qmail/supervise/qmail-pop3d/
What should I type
Hello
In sendmail's /etc/aliases the line
@domain1.name [EMAIL PROTECTED]
means that mail sent to [EMAIL PROTECTED] is sent to [EMAIL PROTECTED]
However this seems not to work with fastforward. Is this true or am I
missing something?
Regards
Leander
Today again 2 visites
from "snowhite"
- Original Message -
From: Rembrandt
Lensink
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Monday, February 12, 2001 8:24 PM
Subject: Fw: WARNING (Reply )
Thank you
Dan for your kind reaction, I was somehow overheated because of the 8
It's sort of an odd request, but I'd like to route outgoing mail to one of
two SMTP servers, but I don't want to do it based on the destination
address. I would like to do it based on the From: address in the header.
OK, so I probably can't do that.
Alternatively, is there any way I could
On Tue, Feb 13, 2001 at 04:48:31PM -0500, Chris Hardie wrote:
[snip]
they'll get three copies of the message in the monolithic Mailbox file on
our server (I tested this and they will with default setup). This is bad
for them because apparently their re-routing software only looks at "To:"
We seem to have a bottleneck reading our /var/qmail/queue, so we were
looking at alternatives like:
1) Create a large ram disk and have the queue mounted there ( can't seem
to create a ram disk any larger than 4M) Any ideas on using a ram disk
for the queue? Has anyone been successful in creating
Grant Edwards [EMAIL PROTECTED] wrote:
Alternatively, is there any way I could use two different "sendmail"
binaries/wrappers to pre-determine which SMTP server the mail is routed to?
Have two different qmail installs (/var/qmail1 and /var/qmail2), each of
which has an smtproutes entry to
On Tue, Feb 13, 2001 at 09:51:11PM +0100, Rembrandt Lensink wrote:
Today again 2 visites from "snowhite"
Why are you mailing this to the qmail list?
Greetz, Peter.
On Tue, 13 Feb 2001 21:39:22 GMT, "Grant Edwards" wrote:
It's sort of an odd request, but I'd like to route outgoing mail to one of
two SMTP servers, but I don't want to do it based on the destination
address. I would like to do it based on the From: address in the header.
You could
Adam McKenna writes:
On Tue, Feb 13, 2001 at 02:47:21PM -0700, Andy Bradford wrote:
On Tue, 13 Feb 2001 21:39:22 GMT, "Grant Edwards" wrote:
It's sort of an odd request, but I'd like to route outgoing mail to one of
two SMTP servers, but I don't want to do it based on the
On Tue, Feb 13, 2001 at 01:56:38PM -0600, Sid Wilroy wrote:
We seem to have a bottleneck reading our /var/qmail/queue, so we were
looking at alternatives like:
1) Create a large ram disk and have the queue mounted there ( can't seem
to create a ram disk any larger than 4M) Any ideas on using
anyone know how i can import 350 email addy's from
a text file into ezmlm ?
thanks
Jps
Greetings. I apologize in advance if this question has been answered in
docs or previous discussion - it seems like it should have been. :) I
*have* read LWQ, the Howto, man qmail-local, man dot-qmail, and info about
fastforward and similar packages, and still haven't found the
clarification I
Chris Hardie [EMAIL PROTECTED] wrote:
For one of them, the user wants to have all
the mail sent to any address @domain.com piled into one Mailbox file
(we're using Mailbox, not Maildir) so they can then download it via POP
and route it internally at their organization. Seems pretty
On Tue, Feb 13, 2001 at 02:47:21PM -0700, Andy Bradford wrote:
On Tue, 13 Feb 2001 21:39:22 GMT, "Grant Edwards" wrote:
It's sort of an odd request, but I'd like to route outgoing mail to one of
two SMTP servers, but I don't want to do it based on the destination
address. I would like
On Tue, Feb 13, 2001 at 09:51:11PM +0100, Rembrandt Lensink wrote:
Today again 2 visites from "snowhite"
A get a few thousand every day. so what?
It's a "smart" virus. Search the google for W32/Hybris and check it's
"abilities"
RC
--
+---
| Ricardo Cerqueira
| PGP Key
Sid Wilroy [EMAIL PROTECTED] wrote:
We seem to have a bottleneck reading our /var/qmail/queue, so we were
looking at alternatives like:
1) Create a large ram disk and have the queue mounted there ( can't seem
to create a ram disk any larger than 4M) Any ideas on using a ram disk
for the
Jeremy Suo-Anttila [EMAIL PROTECTED] wrote:
anyone know how i can import 350 email addy's from a text file into ezmlm ?
`man ezmlm-sub`.
Charles
--
---
Charles Cazabon[EMAIL PROTECTED]
GPL'ed
Unfortunately, I know they're not using fetchmail, and I think they may be
using an NT-based solution.
Does this mean we're leaning towards "tell your user to get a clue"? :)
Thanks,
Chris
On Tue, 13 Feb 2001, Peter van Dijk wrote:
On Tue, Feb 13, 2001 at 04:48:31PM -0500, Chris Hardie
On Tue, Feb 13, 2001 at 05:07:48PM -0500, Chris Hardie wrote:
Unfortunately, I know they're not using fetchmail, and I think they may be
using an NT-based solution.
I have worked with several of our customers that had their
maildelivery broken when we migrated from sendmail to qmail (adding
Charles Cazabon writes:
Grant Edwards [EMAIL PROTECTED] wrote:
Alternatively, is there any way I could use two different "sendmail"
binaries/wrappers to pre-determine which SMTP server the mail is routed to?
Have two different qmail installs (/var/qmail1 and /var/qmail2), each of
I know this may be off-topic, but since most of the people on this list seem to be
familiar with svscan, I thought I might try.
I use svscan to start all of my qmail daemons and can't figure out how to restart it
safely on my FreeBSD 4.0 sys. Thus far, I have tried to kill, HUP, etc. for the
I appologize, but I am not sure if I'm on the list, so can you please
cc: any response to [EMAIL PROTECTED]? Thanks. :)
I have been running qmail for quite some time now. I recently came across
a script that I'd like to use, but it is set up to use the
"mail" program. I was wondering if
Don't you hate it when you figure out your own question? :)
I was wondering if there was a wrapper or some other
add-on that makes linux think "mail" is installed, but in fact just
interprets "mail" commands to qmail commands.
cat $TMPDIR/checkreport.$$ | $MAIL -s "$HOSTNAME $DATE ACTIVE
The installation guide gives such an example:
env - PATH="/var/qmail/bin:/usr/local/bin" \
tcpserver -H -R 0 pop-3 \
/var/qmail/bin/qmail-popup your.domain.com \
/home-dir-of-vpopmail/bin/vchkpw /var/qmail/bin/qmail-pop3d Maildir
-K
"Do not meddle in the affairs of wizards, for they are
On Tue, Feb 13, 2001 at 08:27:52AM -0600, Charles Cazabon wrote:
Tom Hoover [EMAIL PROTECTED] wrote:
The problem is this...every few days, ariel cannot connect to ezekiel.
[...]
So, whatever is happening is a problem on ariel, which prevents it from
_connecting_ to the SMTP port on
Svscan should not be stopped. It just enter the directories and spawns
supervise processes. Supervise should be used to start/stop services.
You can use the svc command to restart your qmail system.
man svc might help you.
[]s
Davi
On Tuesday 13 February 2001 21:11, SNFettig Listserv wrote:
I
On Tue, 13 Feb 2001, Bill Parker wrote:
I am working on installing amavis for scanning inbound/outbound emails with
NAI's Virus Scan engine. I have a question, in running the ./configure for
amavis,
it says it needs reformime (which is a part of the maildrop package). If I
compile
HI,
Having problem with an alias containing a command, error message =
permision denied
Need to setup a [EMAIL PROTECTED] alias as
"|/usr/local/bin/ldap_query"
where ldap_query(1) feteches the latest list of all email addresses.
My simple test of
$cat /var/qmail/alias/.qmail-test
On Tue, Feb 13, 2001 at 11:55:39AM -0800, Medi Montaseri wrote:
SNIP
My simple test of
$cat /var/qmail/alias/.qmail-test
|/home/medi/ldap/foo
SNIP sample code
Is failing with an error message in /var/log/maillog saying
Feb 13 18:54:21 samba qmail: 982119261.837833 delivery 11917:
Sorry Greg, the paths are correct, I just reported them incorrectly and
the permission on /home/medi/l/foo is
[medi@samba l]$ ls -l /home/medi/l/foo
-rwxr-xr-x1 medi users 94 Feb 13 18:40 /home/medi/l/foo
[medi@samba l]$
and .qmail-test reads
[medi@samba l]$ cat
On Tue, 13 Feb 2001, SNFettig Listserv wrote:
I know this may be off-topic, but since most of the people on this
list seem to be familiar with svscan, I thought I might try. I use
svscan to start all of my qmail daemons and can't figure out how to
restart it safely on my FreeBSD 4.0 sys.
Hi all
I am trying to use qmail-scanner with qmail, and have recompiled with
the QMAILQUEUE patch. My qmail/supervise/qmail-smtpd/run file looks
like:
#!/bin/sh
QMAILDUID=`id -i qmaild`
NOFILESGID=`id -g qmaild`
QMAILQUEUE="/var/qmail/bin/qmail-scanner-queue.pl" export QMAILQUEUE
exec
Hello,
I installed qmail+mysql patch (from here:
http://www.softagency.co.jp/mysql/qmail2.en.html) and everything was
working fine. Today i was playing with maildrop and I don't know how
that happend, but qmail is not working anymore with mysql
authentication. Now it works with /etc/passwd ...
Monday February 12 2001 23:10, alex wrote to All:
a It might be stupid question, but I have no clue where should I put
a startup line for qmail-pop3d and vchkpw? I tried in /var/qmail/rc
a but
a it didn't work. Please help me!
That is not very well documented at all!
I run mine from
hi all,
I'm getting a reoccuring error in my qmail logs,
I'm not sure I understand what it's trying to
tell me.
@40003a8a0e53036600b4 warning: trouble opening remote/4/2226680; will try again
later
@40003a8a0e530367aa7c warning: trouble opening remote/10/2226663; will try again
later
On Tue, 13 Feb 2001, [EMAIL PROTECTED] wrote:
hi all,
I'm getting a reoccuring error in my qmail logs,
I'm not sure I understand what it's trying to
tell me.
@40003a8a0e53036600b4 warning: trouble opening remote/4/2226680;
will try again later @40003a8a0e530367aa7c warning:
Dan, Why did you need to post that message as html as if the original is
*distracting* enough?? plain text would have been sufficent...
George
Dan Egli wrote:
Dude,
The person sending the virus likely has no idea he (or she) is sending
it. The virus infects your winsock32.dll
Actually I use a tool called qmHandle -d# to delete a few messages out of
qmail's message queue. Funny thing is doing a qmHandle -l produces:
Messages in local queue: 0
Messages in remote queue: 2
But a qmail-qstat produces
messages in queue: 17
messages in queue but not yet preprocessed: 0
Hi,
Is there any way one can do load balancing with qmail, i.e I have two
machines both with qmail set up and running. Is there a way that I can have
them both serving as smtp servers without the clients knowing which machine
is sending the ail for them?
Andrew
80 matches
Mail list logo