Install the caching-nameserver package.
If bind itsellf does not have a conf file, that package has.
regards, Willem
On Tue, 21 Oct 2003, Bilal Dar wrote:
Hello,
I recently installed redhat9, and there is no bind config file. Do i have to create
it myself manually or i have any other
Hello,
Which version of Oracle are you trying to install?
There are different issues with different versions.
Do you install from cd or a staging area?
Have you followed all the pre-installation steps, eg. creating a dba group
etc?
An Oracle install under any unix is a pain to say the least, but
Hello,
You do not need to compile a special kernel for running oracle.
The only thing with Oracle 9i is that you have to un-install the openldap
packages and let oracle install its own.
If you want support from Oracle you would have to buy the Red Hat
advanced server.
If not, then you can install
Hi,
The advanced server rpm packages seems to have been currupted files.
Thanks for the pointer to the files in
/var/lib/rpm for the hanging rpm problem i had.
Regards, 'Willem
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
Hello,
I have two rpm questions.
1. On redhat 9 by forcing installs etc. i got rpm to a state where it
hung.
With some difficulty i killed it. It now does not even want to do a query.
I tried rebuilding the database with rpmdb --rebuilddb. It also seemed to
hang, (I left it over night).
What
HHi,
I do not know about all of these, but it look like lpd is running port 515
close by chkconfig lpd off
May be you can close 111 by stopping nfs if it is running.
chkconfig nfs off
hth
Willem
On Wed, 8 Oct 2003, Jack Bowling wrote:
On Wed, Oct 08, 2003 at 03:21:13PM -0400, Reuben D.
Hello,
Try checking the root file system. It looks like the grep program got
currupted.
at the # prompt do fsck /
and exit when it is done.
try rebooting and send the next error if it does not work.
Regards, Willem
On Thu, 9 Oct 2003, Ray D. Stambaugh wrote:
Hi
I am running Red hat 9. The
Hello,
On the server where the shares are, you need to setup /etc/exports.
This is a file which tells the nfs server which areas of the disk must be
exported so that they are visible to the other users.
After you have made changes to this file, you should restart nfs for the
changes to
take
Trend's interscan runs on Linux too.
On Wed, 1 Oct 2003, Thomas Fortner wrote:
Message: 5
Date: Tue, 30 Sep 2003 14:33:20 -0500 (CDT)
Subject: OT: http content scanning proxy
From: Distribution Lists [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
Does anyone know of
Hi,
You can have partitions from the same disk in raid.
During the Redhat training we did that when learning raid.
regards, Willem
On Thu, 11 Sep 2003, Leonard den Ottolander wrote:
Hi Thomas,
Hm... The HOWTO isn't clear on whether those partitions can reside on
one single disk (which is
Hi,
As root, do service telnet start.
Do setup and select system services.
make sure telnet is marked to start up by default.
You should now be able to telnet to the box, but you will have to log in
as a normal non-root user and su - root
to get root access.
regards, Willem
On Tue, 2 Sep 2003
Hi,
I have done what you want to do although it was not win 2000.
You might get an io error at the end of dd but things should work fine.
It should copy the hole thing as is and it should work.
Just check xxx records in and xxx records out to make sure they are the
same.
regards, willem
On Tue,
Hello,
from the command line do:
cdrecord -v dev=0,0,0 --eject --data file.iso
That should put the iso image on the disk the way you want. It assumes
you are using an ide cdwriter and that you have no scsi devices.
It would complain soon enough if this is not the case so you might just
try the
I am not that sure mysellf, but you need to load two modules like this:
modprobe ip_nat_ftp
modprobe ip_conntrack_ftp
and then ftp connections works correctly.
Other members on this list is better qualified than me
to tell you exactly what these modules do.
hth
Willem
On 7 Aug 2003, Sinon wrote:
Try telnet site.name 80
and see if it connects.
If not, and you can ping it, it sounds like a firewall blocking port 80
somewhere between you and the site.
regards, Willem
On Thu, 7 Aug 2003, Andre Kirchner wrote:
Hi,
I have the DNS servers IP correctly configured, and so I can discover the
Hi,
ftp use port 20 for the data transfer.
It looks like you have not opened that.
Port 21 is just for making the ftp connection.
I think you also need to call a module ipcontract to allow the ftp
connection
to be initiated and the data on another port to be seen as part of the
same established
Hi,
can you ping yourself?
I mean can you ping from rh9 the ip address set up on eth0?
Is your gateway set?
On Wed, 30 Jul 2003 [EMAIL PROTECTED] wrote:
Ah ok
I have now trashed my box and installed redhat 9 .. what a suprise it
does exactly the same...
Can anyone help me out
do man nc or info nc
nc is netcat and can be used to do what you want.
On 30 Jul 2003, anil garrepally wrote:
Hi Everyone,
Can anyone tell me how to write a Bash script, that will do
telnet login to one machine and do some activity on that logged
machine.
I was informed that
Hi,
You can look at compieer.
It uses Oracle which you would need to purchase, but you can evaluate the
thing using an evaluation copy of Oracle for Linux.
LIa href=http://sourceforge.net/projects/compiere/;SourceForge: Project Info -
Compiere ERP + CRM Business Solution/a
LIa
Hi,
Try using pci=bios in lilo.conf or as kernel parameter on the command
line.
I have an LG card containing the same chip and it does not put the irq
option in modules.conf.
Why is it on this irq?
hth
Willem
On Thu, 24 Jul 2003 [EMAIL PROTECTED] wrote:
Im having a problem trying to get a
ZHello,
The best argument for using postgresql in place of Oracle is that the
latest
Oracle has lots and lots of feutures which one normally do not need.
It is expencive and is normally only required for large multi-national
companies.
hth
Willem
On Thu, 24 Jul 2003, ETI - Barry Irchad Kader
Looking at a later message in this thread, refering to web editors,
you can also look at HPbuilder from IBM i think.
It has a customized wine package under which it run.
It is wysiwyg. It generates valid but inifficient code.
regards, Willem
On 20 Jun 2003, David Hart wrote:
Has anyone
best choice.
On Wed, 18 Jun 2003, Willem van der
Walt[EMAIL PROTECTED] wrote:
If any one is using a radius server on RH8 or
later, please let me know?
--
Res
-
Network Solutions: clueless f'wits who dont care
whos business they
damage through their incompetance
Hi,
wget -b http://www.whatever.com/file.xxx
will fetch file.xxx from the site and store it in the default directory.
The -b makes wget go to the background. It will log the results of the
transfer in wget-log in the default directory.
Do man wget for the other options. You can do a lot more
Hi,
I am still trying to log dialup users (Cisco 2610).
I googled for radius and found a few servers.
I know almost nothing about radius as yet and want to start with a program
that is known to work. i found Ic-radus which sounds like what i want.
It seems a bit old in Open-source terms and the
detailled suggestion.
regards, Willem
On Thu, 29 May 2003 [EMAIL PROTECTED] wrote:
On Thu, 29 May 2003, Willem van der Walt[EMAIL PROTECTED] wrote:
Hi,
My bos wants a weekly list of user accesses to our dialup service, showing
at what time who was logged in for how long.
We hav a Cisco 2610
Hi,
My bos wants a weekly list of user accesses to our dialup service, showing
at what time who was logged in for how long.
We hav a Cisco 2610 router with 16 integrated modems.
The phone lines is in a hunting group and linked to a single number that
the users dial to get in.
Using snmptrapd on rh
is there a way to mount a disc image without it being on a disc? (
I dont have a burner.)
mount -tiso9660 disk.iso /mnt/cdrom -o loop
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
Hello,
Regarding the message with this subject on redhat-list:
You can normally use epox boards with either Intell or AMD processors.
The Asus boards can be a problem as they do not always use the same
chipset
maker.
I do not know where you are, but if you are in Gauteng, you can contact
me and
sendmail that
health.gov.za is another name for top.health.gov.za and caused the machine
to look for a user on top instead of relaying the message.
thanks aggain
Willem
On Mon, 17 Mar 2003, Cowles, Steve wrote:
-Original Message-
From: Willem van der Walt[EMAIL PROTECTED]
Sent
Hi,
The machine top.health.gov.za 196.15.225.8
is the secondary relay for our domain, health.gov.za.
It worked fine running rh 7.1.
I ran up2 date on it to update the sendmail after the 3 March
exploit became known.
I kept the old files as is in /etc/mail.
It now behaves as follows:
When mail is
Hi,
Thanks sofar.
It worked, but now i have an open relay.
I had a modified local-host-names file that was modified by
the update.
It had the comment that it made the entry
top.health.gov.za
health.gov.za
from the obsoleted /etc/sendmail.cw file
regards, Willem
On Mon, 17 Mar 2003, Willem Brown
If you have not sorted this out by now, you should
be able to run Xconfigurator from a root console prompt.
This is based on rh 7.3 and earlyer.
On Tue, 25 Feb 2003, Antonio Burzio wrote:
I installed linux rh 8.0 and i have a ati radeon 9500, but I choose
(since I had no other choice) driver
Hi,
For the first time, i have a motherboard, Epox, and a 7200 rpm hard drive
that both supports udma.
I have seen the discussions about hdparm and getting the dvd cdrom to
use dma.
Should i also load a module for the ide hard disk somewhere?
regards, Willem
--
Willem van der Walt
Information
Hi,
Thanks so far!
I have tryed to uncomment
Use_dma=1
and rebooted. I then get a message permission
denyed in /var/log/messages.
Is this because i have not uncommented the other options or do i still
have
another problem?
thanks aggain
Willem
On 3 Mar 2003, Richie Crews wrote:
if you look in
Hi
The vidio ram is in fact taken from the
main memory, causing the 121M. One can set the amount of ram provided to
the video card down to 2 megabyte.
If we have gotten hold of a good technition over the phone,
we would not have taken the board in for testing. It was fine, but the
manual does
Thanks,
I'll try that if they find the board to be ok.
regards, Willem
On Thu, 13 Feb 2003, Edward Dekkers wrote:
Hi,
I thought there are too many problems with rh 8.0 and
decided to wait for 8.1.
We are now taking the board to the distributor for testing.
The 121 mb ram is shown as
I am trying to install rh 7.3 on this board.
Also tryed 7.2 both hangs.
7.3 goes fine until it asks for the second cd and then hangs.
On 7.2 it does not always hang on the same place.
Does any one have this board and had the same problem?
What did you do?
The ram shows as 121 mb not 128 mb as it
?
-Original Message-
From: Willem van der Walt[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]
Sent: Wednesday, February 12, 2003 1:33 PM
To: [EMAIL PROTECTED]
Subject: rh 7x install hangs on MS-6368 motherboard
I am trying to install rh 7.3 on this board.
Also tryed 7.2 both hangs.
7.3
Hi,
Connect your linux box to the internet, setup a firewall on it and you are
basicly there. You can setup squid as a web cacheing/proxy server
to speed up things. You can do it on a relativly small box.
regards, Willem
On Tue, 11 Feb 2003, Daniel wrote:
Does anyone know how to establish an
use:
cat file.pdf | pdftops | lp
Just check if you can pipe through pdftops.
On Wed, 12 Feb 2003, Kevin - KD Micro Software wrote:
Hello all,
I'm looking for a command line text based utility that can print PDF files.
I know the cups print system does this, but it would be a lot easier if
I got this scanner yesterday.
I have never worked with any usb devices under linux,
I have never worked with sane.
I downloaded the iscan rpm from Epson.
It installed without problems.
When i run scanimage it says: no scanner devices found.
Do i need to configure sane?
According to the
Hi,
7.2 uses kernel 2.4 where 6.2 still uses kernel 2.2.
There are a lot of differences due to that.
A lot more hardware support etc.
On Sat, 8 Feb 2003 [EMAIL PROTECTED] wrote:
Can anybody provide me with relative comparison between features of redhat6.2
and redhat7.2.I shall be highly
Hi,
Although not on a rewritable, i have seen this.
I got almost the exact error when i tried to write a cd at speed 1 when
the media could be written at speeds starting at 2.
On 20 Jan 2003, shawn wrote:
Hello,
I am trying to back something up to my cd-rw and keep getting errors.
I tried
Hi,
My wife is working through the gimp users manual GUM and
Grokking the gimp, another book on gimp.
The gimp programs are installed from the rh-7.3 cds.
The problem is that some of the features discussed in the books are not
available in this installed version. I at first thought it is only the
Hi,
Look for the rpm packages containing mysql in the name and install them.
Look for the packages starting with php and install them.
Edit /etc/php.ini and /etc/httpd.conf to enable mysql.
hth
Willem
On Tue, 19 Nov 2002, Toto Gamez wrote:
Hi,
I just installed apache server on my test box
I had a simmelar problem with ftp.
I solved it by adding a host entry of the ftp client machine into the
/etc/hosts file of the machine running the ftp server. You could also
look at your resolv.conf files of both machines. If the dns that is
specified there is unreachable,
one also get
I have managed to create a file called
--multi on an rh7.3 box. I need to remove it urgently as it
filled up the root filesystem.
rm '--multi' or rm *multi does not work.
what command should i use?
--
Willem van der Walt
Information Services Directorate
Department of Health
South Africa
tel: 27
Thanks!
It worked.
I would like to understand why it works though.
regards,
Willem
On Wed, 13 Nov 2002, Robert P. J. Day wrote:
On Wed, 13 Nov 2002, Willem van der Walt[EMAIL PROTECTED] wrote:
I have managed to create a file called
--multi on an rh7.3 box. I need to remove it urgently
Hi,
First, check what partitions exists on the disk.
it sounds like the first partition on the disk is very small.
depending on the output of the fdisk /dev/hd p option, one can deside
if you want to repartition or if you only want to mount another partition.
regards, Willem
On Wed, 13 Nov
Hi,
I am running sendmail as a mail relay for our department.
I am not a fulltime mail administrator, so I do not check the postmaster
mailbox as often as one should.
I now did it for a change and found the postmaster to have a 120 megabyte
mailbox due to messages that came back due to
552 size
Hi,
You would get very close to that by making a dd image of your partitions
and write them on another machine.
There are some imaging programs for linux.
As i recall, one sets up a server containing the images of the various
machines
and can then restore/install from the server.
I hav'nt used
Hi,
I think that your problem is the following:
You have installed lilo when you had rh on the box and have not removed
it before you wiped the disk. Lilo is now sitting on the bootsector of
the
drive. You are suppose to be able to remove it with
fdisk /mbr
using the windows startup disk.
In
Hi,
I hav'nt used rh8, but in previous versions ip forwarding is not enabled
by
default in the kernel.
It is done by echoing a 1 to I think,
/proc/sys/net/ipv4/ip_forward
Read the masquerading howto for more info.
hth Willem
On Wed, 30 Oct 2002, Geoffroy Hallard wrote:
Hi,
I'm new user
Change the shell in /etc/passwd to /bin/false
The default is /bin/bash
hth Willem
On Wed, 30 Oct 2002, Tony Hickinbottom wrote:
Using Red Hat 7.x
What must I do to allow a user account to be accessed
for ftp uploads and downloads but not for login.
--
Willem van der Walt
Information
Hi,
The HOWTO documents are so comprehensive that you would do
well to start there. By the sound of it, you are only trying
to make your machines use your router as the gateway to the internet.
I found more information in the Linux howtos than any other place.
They aught to be on one of your rh
Try:
route add default ppp0
after the connection has been made.
hth
Willem
On Sun, 27 Oct 2002, Balazs Laszlo wrote:
Hi!
I have Red Hat Linux 7.2, internal modem HSP56 MR (
with pctel-0.9.4 driver ).
I connect to the internet using the Kppp.
The problem is that after i connect to my isp
Hi,
By default you end up in the vi editor.
It is the clasic unix text editor.
I use an editor called joe
but that is not installed by default on rh.
Pico is installed and that is easyer to use than vi for me.
before you say crontab -e, first do:
export EDITOR=pico
and enter.
then do crontab -e
I seem to recall having to install the smp rpm by hand on an ibm netfinity
box when installing 7.1.
Then one has to change lilo.conf and rerun lilo to load the correct
kernel.
Then do dmesg to see if it worked.
hth
Willem
On Tue, 22 Oct 2002, Claudio Lapidus wrote:
Hello,
I have an old
Hi,
Have you tried /dev/st0
Normally things will work better if you create a link /dev/tape to the
device.
from the commandline, do mt status after you have done:
ln -s /dev/st0 /dev/tape
If it shows up, you should be ok with most software.
hth
On Fri, 18 Oct 2002, IS Department wrote:
I have
On Wed, 16 Oct 2002, Thomas Ribbrock wrote:
And: Which program to use to convert LPs? I suppose one has to cut the
tracks manually, but with what?
gramofile to filter out noise and cut tracks. You can record using sound
recorder
or any commandline tool that can record at cd quality.
Hi,
Have you tryed running sndconfig?
On RH 7.3 sndconfig sets it up.
regards, Willem
--
Willem van der Walt
Information Services Directorate
Department of Health
South Africa
tel: 27 12 3120700
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
Hi,
It is in /etc/sysconfig/network.
network is a file which can contain a gateway statement.
If that file contains no gateway statement, check
/etc/sysconfig/network-scripts for the file:
ifcfg_eth0 or simmelar. that is the configuration file of the eth0
interface.
That, i think can also
what does the listener status tell you about
the activity of the listener and what does the listener log say?
Use lsnrctl status to check.
Can you connect from the server itself to:
sqlplus scott/tiger@test1
On Fri, 27 Sep 2002, Ravi Narwade wrote:
hi everybody
i have installed oracle 9i as
start failed. Listener may already be running
so what i have to do now?
On Fri, 27 Sep 2002, Willem van der Walt[EMAIL PROTECTED] wrote:
what does the listener status tell you about
the activity of the listener and what does the listener log say?
Use lsnrctl status to check.
Can you
hi,
Check under your mixer settings that the volume of the cd itself is set
high.
Also doublecheck that your speakers are connected to the correct output on
your
sound card. I have a simmelar situation where I do not get sound
on the one channal, but on the second channal connected to my high
Hi,
The error loading shared library is not normal.
If the error remains after a clean shutdown/restart, I would
find the fsck package on the cds and do:
at the /cdrom/RedHat/RPMS# prompt:
rpm --verify fsck*rpm
and then take it from there.
It might be that the libc.so.* file got damaged in the
I use C-kermit.
Cannot remember if if downloaded it or found it
on the rh cd set.
It is made for the job you want to do.
Mail me privatly and I can mail the rpm to you.
regards, Willem
On Thu, 12 Sep 2002, Eric Sisler wrote:
Ok, I know there must be a simple answer to this, but I just can't
if you are at a # prompt, type:
fsck /
if / is normally mounted on /dev/hda1.
It will likely then ask you if it can fix it.
hth
willem
On Thu, 12 Sep 2002, Michael Hill wrote:
I got an error at boot-up:
/dev/hda1 contains a file system with errors, check forced.
/dev/hda1: unattended
Hi,
I am trying to recover a deleted oracle datafile from a solaris machine
using the tct program.
In the process I want to use hexdump to find out with which
characters an Oracle datafile starts and stops.
I do not properly understand hexdump's output.
I want to see:
00 or ff and know that it is
Hi,
The easy way is to run Oracle under linux.
Then do a database export on windows and a full import
on linux.
Convert your licenses to linux.
If you want to go for another free database, coming from Oracle,
I would suggest you go for postgresql.
Depending on the amount of data/tables/triggers
Hi,
Have you downloaded the latest rpm from the Varicad site that
is speciphic for rh 7.3?
Ours crashed as well.
regards, Willem
On Mon, 2 Sep 2002, Leon Goldman wrote:
I am using RH 7.3. When I upgraded to it from RH 7.2 the VariCAD program
I was using crashed. It uses OpenGL. I contacted
Hi,
You need to change the run level to which your box boot.
I think it is in inittab. I think runlevel 5 will have X started and
level 3 will have only text mode started.
For the packages problem, either upgrade your linux or try to get a tar.gz
staticly linked version of the packages and
Hi,
You could try to put the line:
lba32
in lilo.conf and then run lilo again.
Windows prefers to be on hda1 in my experience.
regards, Willem
On 12 Jul 2002, shyam wrote:
hi friends
i am trying to install RH7.2 with win 95 ,with each of 9GB
partition
i have windows partition on
Hi,
After putting the root password, you should run
fsck /
It then goes into checking and would most likely assk you to anser yes or
no on questions like:
eg. invalid inode, correct it yes or no.
Just answer yes to all these questions and type reboot when
you get to the # prompt again.
It should
nmap -oN any_file_name.log host
this will log the nmap output to the file: any_file_name.log
hth
Willem
--
Willem van der Walt
Information Services Directorate
Department of Health
South Africa
tel: 27 12 3120700
___
Redhat-list mailing list
Hi,
Trend Micro has virus software for Linux.
They also has software for most other platforms like Solaris and Novell.
I think their international web site is: http://www.trendmicro.com.
The south African site is: http://www.sd.co.za
hth Willem
On Tue, 2 Jul 2002, CCI-ICC Administrator wrote:
Hi,
You have to have a java jre installed.
TRe is also a patch for relinking oracle.
I do not know if it is these days included with the cd set.
there is a good set of instructions about this
I cannot lay my hands on it know.
Look at the linux Howtos for oracle.
regards, Willem
On Wed, 26 Jun
Hi,
Under 7.2, the web home dir is normally under
/var/www.
I would try to tell the installation program to change prefix to some
thing
else.
If that does not work, I would make a link to a directory under /usr where
there is a lot of space.
If it wants to create a directory called newprog
Has anyone succeded in making squid do ldap authentication using an
ldap server running on Netware? I have the squid_auth_ldap utility, but
do not get anywhere with it.It does not find the user on novell.
I think the problem is on the novell side, but I do not know enough about
Netware to correct
Hi,
Gnucash is on one of the RH cds.
Depending which rh you have it will differ.
It might be on the powertools cd if you have an old version.
I cannot remember the name, but *cash*rpm should do.
hth Willem
On Fri, 17 May 2002, Yohann DESQUERRE (DSI NOISIEL) wrote:
Interested in gnucash i tried
What i do is to leave the smtp address blank.
Pine then use the sendmail on the Linux desktop.
As long as the firewalls allow it, the mail will go out to
the other smtp server directly.
use h to see where this mail has travled.
That is turn full header display on in pine.
hth Willem
On Thu, 16
Hello,
I am trying to configure squid to authenticate users for internet access.
Squid is running on an rh 7.1 box.
I have compiled a module called
squid_auth_ldap. It, according to /var/log/messages,
successfully connects to the netware ldap server but does not find
the users as one looks for
Hi,
I do not know about the Redhat version of Staroffice, but if you do not
have a java runtime installed, Staroffice still works.
It just says that you would not have some java related support.
hth
Willem
--
Willem van der Walt
Information Services Directorate
Department of Health
South
Hello,
I once had a simelar problem.
mount the cd by hand.
umount /mnt/cdrom
mount -tiso9660 /dev/hdb /mnt/cdrom
Do ls and look if the setup file is there.
If not, there should be a directory like Linux. cd to that directory and
ls there to look for setup. If it is there, do ./setup from there.
Hi,
You would have to do the updates afterwards.
regards, Willem
On Fri, 1 Mar 2002, Kerry Miller wrote:
This is probably a dumb question, but I'm just curious so I'll ask it
anyway!
If I download the iso's for 7.2, have those iso's been frozen and I'll still
need to install all the
Hi,
Look in /etc/ppp/peers or there abbouts for another resolv.conf.
If it if there, it will contain the nameserver entry you need for the
second isp. Just append this file to your /etc/resolv.conf
and things should work.
hth Willem
On Tue, 26 Feb 2002, Silviu Cojocaru wrote:
I am using RH
hi,
I think your cd is fine.
It sounds like the install cd kernel does not see your cdrom.
I think you can press alt-f2 to get to a kind of a shell prompt.
From there you might be able to see what it picked up.
You can also try to create an install floppy and try booting with that.
May be, it
Hi,
We are trying to install rh7.2 on an HP lh3 with a symbios raid controler.
The install stand still when loading a symbios raid driver.
What could be the problem or sollution?
regards, Willem
___
Redhat-list mailing list
[EMAIL PROTECTED]
I would suggest you go into rescue mode and try to get lilo installed on
the boot sector from there.
regards, Willem
On Thu, 7 Feb 2002, Steve Cohen wrote:
Aargh! I am in upgrade hell.
I tried to upgrade a system that was running 7.0 to 7.2. It is a dual
boot system with Win 98 running in
One can load either of them, I just do'nt know grub.
With lilo, one would basicly get to a linux prompt
using the rescue disk, mount your linux partition, change to the correct
spot, chroot
configure and run lilo. I think grub would be like wize.
regards, Willem
On Thu, 7 Feb 2002, Steve Cohen
Any ideas on why the boot-floppy generator failed? It had no trouble
writing to the floppy. I don't think it's a disk-media problem. It
seems more likely that the installer is writing a bad floppy. What's up
with that? Is this a known problem with the RedHat installer? Is it
Is tthe default system that you want to boot the Linux or the win?
You could try to put
default = lin
into y0our lilo.conf if you have the statement
label = lin
in the description of the linux image.
It should then boot your linux from where you can fix things further.
Even though lilo does not
Hi,
lba32 stands for large block access or something.
If you have a disk that is big like 20 gb, it might help or even
be required to use lba32.
You should look in your bios when starting the computer if your disk is
set as a lba disk.
lba32 has got to do with the interpretation of the disk
Hello,
I am trying to connect a rh box using wvdial.
The ISP's technical support only knows windows.
Using minicom, I found out that the terminal server on their end is some
Cisco router/terminal server.
It accepts the username and the password. To get it to start ppp
negotiation,
i found out
95 matches
Mail list logo
