Cisco 3640 router freezing up

Good day all, I have another issue here. I have a 3640 router at a client site which is running IOS 12.09 desktop plus. The routing process is EIGRP - for IP and IPX. The problem I have is that this router is occassionally freezing up. It becomes totally unmanageable, but a reboot will fix this.

Re: FastEtherchannel using Compaq Servers

This is very true - take the trunking off the ports you wish to run FEC on, you're not connecting to another switch and I'm sure that the Compaq server isn't much interested in other VLAN traffic. When you get this going you'll have to set the port channels to "on" - the compaq cards don't use

Vlan Questions

Hi All, I am new to this list so sorry if this has been asked before. I am really confused about the benefits/setup of Vlans. The more reading I do on the subject, the more confused I get. Say, I have a network of 100 users who all access a file server and Internet router. How can I split them u

Re: CLSC exam on Saturday.

>From your list I would say the last two. If you are taking exam 640-404, expires 7/31/00, then make sure you read the student guide for the CLSC class. Tim Jacques Lee wrote: > Dear all, > > Which part should I pay more attention on ? > Token ring? ATM ? Specification for each Catalyst Switch

ATM cables

I need to direct connect I 3640 NM-4E1-IMA ATM card to an IGX. What kind of cable I need to use Thanks   Stefano AndrelloSystem EngineerTecnonet SPA CCNAtel +390226928817fax +390226928836mobile +393482513162[EMAIL PROTECTED]www.tecnont.it

Re: Cisco 3640 router freezing up

Did you make any analysis whenever the router freezes, such as the routing table entries, ping connectivity etc.. If you have some detials with you then kindly send it across. It may help to resolve the issue asap. Thanks Hitesh CCNA Andrew Larkins <[EMAIL PROTECTED]> on 07/05/2000 12:24:

RE: Cisco 3640 router freezing up

all connectivity is gone - no eigrp updates come through, ISDN does not kick in... basically dead with power on -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: 05 July 2000 09:36 To: Andrew Larkins Cc: Cisco Mail List; [EMAIL PROTECTED] Subject: Re: Cisco 3640

Re: beer bash at networkers!!!!!!

The "Customer Appreciation Event" was much more fun! The trolli hat was a big hit when I got back to work. :-) *** REPLY SEPARATOR *** On 6/27/2000 at 7:46 PM Phillip Diamanti wrote: :Beer bash at networkers who :

Frame Relay Switching

Hi there gang Is my assumption right concerning this frame relay switching scenario ? Cisco DLCI 16 Ser0| |Ser1 | | | |---

RE: Frame Relay Switching

it should be like this Interface serial 0 Frame-relay route 16 interface serial 1 18 Interface serial1 Frame-relay route 18 interface serial 0 16 provided you want to announce DLCI 16 on serial 0 and DLCI 18 on serial 1 and interconnect them to form a PVC ... I am not getting why you have also

Re: Cisco Press Errors

go to www.ciscopress.com , there is correction for the book you mentioned. Regards, Dan West <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Does anyone know of websites/newsgroups that post > corrections to mistakes in Cisco Press publications? > They may be

RE: Slow Speed in 2900 Switches, Pls Help!!

YES i was out of line and i appologise .BUT the guy was getting some bad info.everyone was looking in the air and not the ground It seemed the only way HE was going to get some GOOD advise was if someone shacked the place around abit...all the advise after my rant was very sound and

RE: Cisco 3640 router freezing up

Hi there Andrew Do a show processes on your box & look at the utilization . It might give you an idea what the processor is crunching out . Regards Olden -Original Message- From: Andrew Larkins [mailto:[EMAIL PROTECTED]] Sent: Wednesday, July 05, 2000 8:55 AM To: Cisco Mail List Subject:

question about ccnp 1.0

Since cisco is retiring the ccnp 1.0 this end of July. Assuming that Joe Blow has passed his ccnp 1.0 track, does it mean that after July, his CCNP status will be voided? And he has to re-take the ccnp 2.0 track? If that is not the case, then how long will his ccnp 1.0 certification hold before

Re: Cisco Press Errors

In a message dated 7/5/00 5:27:18 AM Eastern Daylight Time, [EMAIL PROTECTED] writes: << go to www.ciscopress.com , there is correction for the book you mentioned. >> The page is a messed up link...I think the servers down...oh well, nice CISCO site...lol ;) Mark Zabludovsky ~ CCNA [EMAIL PR

RE: Frame Relay Switching

Inverse arp maps layer 3 addresses to the appropriate DLCI. Yes you can have multiple frame-relay route statements on the same interface. Can you tell me which DLCIs you want to announce and on which interface. As far as i can understand you want to announce DLCI 16 on serial0 and DLCI 18 on se

RE: Frame Relay Switching

Hi there Thx Atif Its me and my Motorolas again ! We need both 16 & 18 to be switched through serial 0 I left 16 out because I reckoned the inverse arping will take care of that to create the pvc map . Is it possible to make multiple statements on a single physical interface ? Thx in advance Ch

Re: Auto Install

Olden, You might want to be more specific with your questions in the future, otherwise you will get answers like this. Once you read the autoinstall procedures, you should understand why I can't give you a more specific answer. SEE the below URL for details on how to perfrom autoinstall http:/

RE: Frame Relay Switching

Atif , 16 & 18 on serial 0 18 on serial 1 Basically the aim is to get from one Motorola side through the Cisco to the other Motorola side .It'll be nice if you can have 16 & 18 on the one Motorola to go through to ultimately end up on the other Motorola side . Hope it helps ! Cheers Olden

Re: policy routing

Try changing the set interface to set next-hop. Use set next hop when you know the next hop address.  In your case: change "set interface serial0" to "set ip next-hop 192.168.3.2" and "set interface serial1" to "set ip next-hop 192.168.4.2" When you said that your configuration wasn't working; w

RE: Auto Install

Thx for the link Tim ! Was just looking for soemthing to guide me ! Thx again ! Cheers Olden -Original Message- From: Tim Evens [mailto:[EMAIL PROTECTED]] Sent: Wednesday, July 05, 2000 11:46 AM To: [EMAIL PROTECTED] Subject: Re: Auto Install Olden, You might want to be more sp

Re: aaa if-needed

Jim Bond wrote: > > "aaa authentication ppp if-needed: does not > authenticate if user has already been authenticated on > a TTY line". What does it mean? You have two options for user authentication: - PPP authentication PAP/CHAP (after PPP starts), - Username/Password prompt on tty line. In s

Re: Removing a NAT static entry ...

At 01.52 22/06/00 -0700, Cisco Wave wrote: you must execute the command "clear ip nat translations" and quickly "no ip nat static source ..." >Hello There, >How can I remove a NAT entry ? >"ip nat static source outside ... " >I thought that a no of the same line should be doing >it ... Howe

7200 local director

Hi there gang Can somebody help me with this ? I need info and as to what local director is for the 7200 . I checked Cisco's site but did not become any wiser ! Thx Olden Pieterse MCP , CCNA , BCMSN , BSCN , BCRAN Brainbench Certified CISCO Network Imple

Re: Solaris on Intel platform

Lilian, I think you can find better advices in groups dedicated to SUN products. This group is dedicated to Cisco rather than SUN Anyway, Can't help you with Solaris 8, but I used Solaris 2.6 on several Intel machines, it works pretty fine and I liekd the prformance, but hardware was (and I

Re: Wild Card Mask Puzzle SOLUTION!!!!!!

I agree with this -Joe- Andreas Klemm <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > On Tue, Jul 04, 2000 at 11:19:17AM -0500, Michael L. Williams wrote: > > access-list 10 permit A.B.C.1 255.255.255.24 > ^^^ > This is

RE: Is it a just a myth??? (CCIE w/out CCNP)

It is all in the mind, I think it depends on the individual i.e do you have the experience and what it takes to understand the concepts and pass the exams ? Another point is that taking this exams as modules allow you to know some finer details about the technology you will be working with in the

Re: Return of the Chat Room

Yep! Try this one instead: www.allnetllc.net/chat/ciscochat.htm >From: [EMAIL PROTECTED] >Reply-To: [EMAIL PROTECTED] >To: [EMAIL PROTECTED], [EMAIL PROTECTED] >Subject: Re: Return of the Chat Room >Date: Wed, 5 Jul 2000 00:43:20 EDT > >In a message dated 7/5/00 12:39:06 AM Eastern Daylight Tim

Re: Yippeeeeee!

See faq question number 21 http://www.cisco.com/warp/public/10/wwtraining/certprog/faq1.html#ccnp-ccdp Tim woody wrote: > Finally attained my CCNP/CCDP status. Thanks to all on the group for > answering most of my questions (and ridiculing some of my answers - hell we > all have to learn...)

test2

test2 -- John Gesualdi The Providence Journal Company Phone (401)277-8133 Pager (401)785-6938 CCDP,CCNP ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misco

Re: Internal T1 WIC

I don't know if this will help or not. I've used the internal T1 cards on 1720, and had trouble with them when using IOS levels 12.0.3T and 12.0.5T Once we upgraded to 12.0.7T there were no more problems. > >I have a situation where a 1601 R 12.0 (3) is on ptp frame >at frac T with 1 chann

RE: Frame Relay Switching

Do one thing .. post your setup requirements and the equipment details ( if thats not a prob ) and then i am sure someone ( ho0pefully me :) ) will be able to help you better ... One thing i want to make clear is that you cannot route a single DLCI to multiple DLCIs. Regards Atif -Original

Re: 7200 local director

http://www.cisco.com/warp/public/cc/pd/cxsr/400/index.shtml it balances tcp/ip traffic across mutliple servers. .. Oz http://www.mcseco-op.com/Cheap_Cisco_stuff.htm ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and s

Yet another simple index

http://www.cisco.com/warp/public/779/smbiz/service/pindex.html Oz http://www.mcseco-op.com/Cheap_Cisco_stuff.htm ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report

Rack

Folks, Where in Boston I will be able to buy a rack for my equipment, I don't want to pay too much. Thanks, Juan Blanco Allied Riser Communications Inc. Boston Area Manager, Field Operations www.ArcBroadband.com ___ UPDA

Re: Frame Relay Switching

If you want DLCI 16 on one interface to switch to DLCI 16 on the other AND DLCI 18 on one interface to switch to DLCI 18 on the other then the config below will do it for you. Darren ! frame-relay switching ! interface serial 0 encapsulation frame-relay frame-relay intf-type dce clock rate ?

CCNP specialisation

Hi , Thanks for all the posting in this wonderful newsgroup. After obtaining my CCNP , now i would like to get specialised. Which of the specialise course is the most easiest to obtained ?? Comments please ... Regards ken ___ UPDATED Posting Guidelines: http://

Broadcast multiaccess, nonbroadcast multiaccess

Hello, Would some one please remind me which WAN technologies are considered nonbroadcast multiaccess, NBMA? which are considered broadcast multiaccess? Thanks Omer NetZero Free Internet Access and Email_ Download Now http://www.netzero.net/download/ind

Re: suppressing null update

Dear Michael, I have found what the problem was. Before I explain what happen, please examine the configuration of IP RIP and ip configuration of serial 0 from the output bellow. R3#sh ip int brief Interface IP-Address OK? Method StatusProtocol Serial0

CCIE Design

Hi. Does anybody know format of CCIE Design Lab Exam? thanks. > Ali Burçin KOZAK > [EMAIL PROTECTED] > Network | > --G R U B U-- * 90-216-556 13 53 > Fax 90-216-556 11 88 > ___ UPDATED Posting Guidelines: ht

point-to-point or multipoint subinterfaces

Hello, I have a router with tow serial ports. I have noticed that one of my serial interfaces, which is configured with HDLC encap, does not give me the option to choose between point-to-point or multipoint subinterfaces. The other serial interface, with frame-relay encap, allows me to do so.

RE: 7200 local director

The localdirector is a separate box and doesn't really talk to the 7200. I have two of them now and they've been working great. We turned them on, configured them, and forgot about them. That's the upside...they work with little trouble and if you get two of them the failover works very well.

Re: Rack

>From me: www.optsys.net -Brad Ellis CCIE#5796 "Juan Blanco" <> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Folks, > > Where in Boston I will be able to buy a rack for my equipment, I don't > want to pay too much. > > Thanks, > > Juan Blanco > Allied Riser Communicati

Re: Cisco 3640 router freezing up

12.0(9) is buggy. try running 12.0(7)t. however make sure you have enough DRAM/FLASH to handle this IOS. -Brad "Andrew Larkins" <[EMAIL PROTECTED]> wrote in message 8F5F72F80EF5D311ADE600A0C9DCF86251E753@UBDCCOMJHBEX">news:8F5F72F80EF5D311ADE600A0C9DCF86251E753@UBDCCOMJHBEX... > Good day all, >

Book + Resources about WEB security

I would like to know that best books and resources to study for web security. Particularly, I would like to learn about the the canned scripts that target for Apache CGI-bin vulnerabilities and the corresponding security measures. Any info is appreciated. George Zhang, CCNP ___

RE: FastEtherchannel using Compaq Servers

Assuming the server is running NT, FastEtherchannel is enabled on Compaq NC series NICs through the Advanced Network Teaming and Configuration Utility in the Control Panel. This utility is automatically installed when the driver for those NICs are installed. The teamed NICs can be set to eith

trunk catalyst 2924-3640

Hi, only for validate if the fastethernet port of 3640 router support trunking with catalyst 2940 I need a especial IOS thanks for yours comments regards _ Federico Díaz Herrera T E R R A N E T W O R K S M É X I C O Networks Engineer *ema

Basic Config question??

Hi, Had a question on the output of a sh ver. command on my 2501 router. The memory reads 2048/2048 bytes of memory. The NVRam has 32K of memory and the system flash reads 8192K bytes of processor board System flash. Why does the memory read 2048/2048? Does this mean it had 4MB of total RAM but

Re: Book + Resources about WEB security

www.securityfocus.com packetstorm.securify.com www.rootshell.com www.cert.org Get yourself on the Bugtraq mailing lists at securityfocus. For locking down hosts, try http://www.enteract.com/~lspitz -- good information about firewalls and armoring hosts. Also, try www.fish.com -- some good inform

SNMP from a device using the Loopback address

Group, Does anyone know how to get a device sending SNMP traps with a source address of its Loopback address. A solution would be greatly appreciated. Steve. Steven Dangerfield, Network Engineer/Analyst B.Eng, CCNA, CCSA Email : [EMAIL PROTECTED] Totalise - the Users ISP --

Cisco warns of router vulnerability

FYI: http://www.cisco.com/warp/public/707/iostelnetopt-pub.shtml   Cisco Routers Vulnerable to Scanners   Monday, June 26, 2000 - Cisco Systems is reminding customers that its hardware may crash when certain vulnerability checks are   

Re: Cisco 3640 router freezing up

Hang on a mo... if you put 12.0(7)T on there you'll lose any Fast Ethernet interfaces you have. I have found 12.0(7)XK1 to be the most complete/unbuggy IOS for 3640's. To be absolutely sure use the beautifully named "hardware - software compatibility matrix" at http://www.cisco.com/cgi-bin/fro

RE: Book + Resources about WEB security

Building Internet Firewalls by Chapman http://www.itprc.com/security.htm Irwin -Original Message- From: George Zhang [mailto:[EMAIL PROTECTED]] Sent: Wednesday, July 05, 2000 10:06 AM To: [EMAIL PROTECTED] Subject: Book + Resources about WEB security I would like to know that best boo

Re: CCIE Design

The lab will be set up in a fashion where less emphasis will be placed on configs (contrary to CCIE r/s) and more so on your design. The proctor will test your design with a software program able to simulate various applications, and a large volume of devices. So in essence, you can throw t

Cisco Cache Engine question

Hello everyone, Is there someone out there who worked with Cisco Cache Engine and knows whether it supports https:// requests in proxy mode ? I am trying to configure a cache engine in proxy mode but when a client tries to connect to an https:// site cache engine sends a TCP RST back to clien

Lab Equipment for Cheap.

I'm posting this because anyone who needs to purchase lab equipment cheap, I have posted mine on ebay with no reserve. Catalyst 2926 (5000 series) switch http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=374805694 Two Cisco 2502 Routers http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item

RE: Dark side of the puzzle More puzzles - OSPF Network statements

Howard, I both agree with you and not... I agree with your statement about how difficult the access list is to read if it's the first time you see it, or if you have been away from it for a while. An example is shown at the end of this e-mail where I have made to Pascal programs that does the sa

Re: SNMP from a device using the Loopback address

You can use the following snmp-server command: snmp-server trap-source Loopback0 Dan >From: Steven Dangerfield <[EMAIL PROTECTED]> >Reply-To: Steven Dangerfield <[EMAIL PROTECTED]> >To: [EMAIL PROTECTED] >Subject: SNMP from a device using the Loopback address >Date: Wed, 5 Jul 2000 15:43:37 +0

Re: Basic Config question??

Let's see if I can explain some of this without sounding like an idiot - I remember having to go thru all this when I was updating fields of stuff for a spreadsheet - the memory 2048/2048 is added together to give you the 4MB of RAM. The first number is installed memory, and the second is share

RE: Should I read another book??? (4-CCDA)

Avran, I passed the CCNA exam last week, and my Cisco instructor said to purchase Top-Down Network Design at www.Bookpool.com (cheaper than amazon). Here is the link: Amazon: http://www.amazon.com/exec/obidos/ASIN/1578700698/o/qid=962810895/sr=8-1/ref =aps_sr_b_1_3/002-1592216-4739264 Book Poo

RE: Set up question

That depends if you use a proxy server or no. If you use a proxy server, when you configure the browser you should specify that you have a proxy and them put the IP address and the port number. Ramon Lugo -Original Message- From: Arun Upadhyay [mailto:[EMAIL PROTECTED]] Sent: Monday, Jul

%Error opening tftp

I configured a 2620 Cisco router using Cisco CofigMaker and now is doing this. %Error opening tftp://255.255.255.255/network-confg (Timed out) %Error opening tftp://255.255.255.255/cisconet.cfg (Timed out) %Error opening tftp://255.255.255.255/2610_melville-confg (Timed out) %Error opening tftp:/

MC3810 again

Hi, on attempting to configure the controller (en;controller e1 1) I get bumped by 'unrecognized'. Does anyone know the pre-req's for setting up such a beast for data (IP) over G.703 over the MFT, that is w/o using serial interfaces (but rather the RJ port on the MFT module) ?? Thanks mh ___

Marshall T Rose - OSI study

I have been looking for an out of print book for studying the OSI model to a deeper level of understanding. I have received multiple recommendations for a book by Marshall Rose. The title is in question but is something like 'understanding the OSI model'. I have tried Amazon and they confirmed tha

Re: Home Lab Recommendations

CCNP, probably 3-4 routers and a switch. Ive got them in stock: www.optsys.net -Brad Ellis CCIE#5796 ""Jordan Rivard"" <[EMAIL PROTECTED]> wrote in message 005201bfe697$3895e120$[EMAIL PROTECTED]">news:005201bfe697$3895e120$[EMAIL PROTECTED]... Hi, I was wondering what you would recommend fo

Access Lists

Hello All, I've configured a 2611 for routing in between two different LAN's. One is a 10.0.0.0 and the other is 192.168.0.0. I have configured access lists for this. I want the 10.0.0.0 network to see the 192.168.0.0 network. I don't want the 192.168.0.0 network to see the 10.0.0.0 network. I ha

Home Lab Recommendations

Hi,     I was wondering what you would recommend for routers/switches for a self study home lab to persue a CCNP?   Thanks,Jordan Rivard, CCNA

RE: Cisco 3640 router freezing up

I agree...I put 12.0(7)T on one of mine and I lost the serial ports. -Original Message- From: Charlie Hartwell [mailto:[EMAIL PROTECTED]] Sent: Wednesday, July 05, 2000 10:49 AM To: [EMAIL PROTECTED] Subject: Re: Cisco 3640 router freezing up Hang on a mo... if you put 12.0(7)T on ther

Re: Happy Independence Day Americans

Happy B-day Steven - Original Message - From: Steven LP Poh (Jaring) <[EMAIL PROTECTED]> To: ABDUL RAZZAQ <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Tuesday, July 04, 2000 12:31 PM Subject: Re: Happy Independence Day Americans > Hey ! Is my birthday also :-) > > > - Orig

Re: Should I read another book??? (4-CCDA)

Since someone already brought it up: :) Passed CCDA today, with a respectable 863, using Top-Down Network Design and a Designing Cisco Networks CBT. The only problem with Top-Down Network Design is that it's too good. Seriously, I thought it was a great book. However, as Priscilla is sure to me

No Subject

Hello, How do you disable "dialer idle-timeout" and set the DDR connection permanently? I want to permanently connect a DDR call to the isp for internet access. I read an info from CCO that say that if you use "no dialer idle-timeout", the idle timeout will default to 120 seconds. I issued show d

Re: [RE: Solaris on Intel platform]

Hi, is 16 colors and 640x480 resolution a general configuration regardless what kind of VGA card is used? What motherboard and CPU do you have, are they the supported ones on Sun website? Lilian Vijay Ramcharan <[EMAIL PROTECTED]> wrote: I've installed Solaris 8 on an Intel based PC. Runs fine,

Re: Wild Card Mask Puzzle SOLUTION!!!!!!

I put "don't care bits" because I used A.B.C.1 to demonstrate that we don't care what those octects were. I should have used 0.0.0.1 or something else... I can see how A.B.C.1 can seem like a specific address Sorry for the mixup. I'll be more careful of these things in the future.. =

Re: ARP Broadcast

And that is why a MAC address is often referred to as a BIA (burned in address). Tom Lisa, Instructor, CCNA, CCAI Community College of Southern Nevada Cisco Regional Networking Academy Christopher Larson wrote: > How would the IP Unicast know where to go? It has to resolve to a machine > addres

Latest books out for CCNA 2.0

Does anyone know which are the best study books out for CCNA 2.0? Thanks for any assistance.

RE: Access Lists

Why don't you just use one access list on the 192.168.x.x network router to deny it from seeing any traffic from the 10 network? eg. #access-list 101 deny ip 192.168.0.0 0.0.255.255 10.0.0.0 0.255.255.255 #access-list 101 permit any any Apply this outbound to the 192.168.x.x interface and you sh

How MUCH ?

Hello all, My apologies for flooding this non cisco stuff but you guys are the only source for now so please no flames I got my 1st contract to re-desing small company's network but I really don't know how much to charge for my service (hourly). I am a bit on hold right now not to bid very hig

Re: Vlan Questions

You can have the server be a part of both VLANs without having to do any routing.. Here's a config snip with an example. Everything defaults to VLAN 1, so no extra configuration on any of the ports that will be only on vlan 1. For clients on the second vlan, do this for every port that you wa

Re: CVOICE 2.0 beta exam

This was posted Saturday, and reappears today...hmmm. Open beta exams are for a broad range of dispersed results for Cisco. Some people on this list have a sickness for anything Cisco. It's a knowledge sponging type thingy, some will understand, some won't. One definition of initiative might be

Re: Vlan Questions

That config would only be valid for a 2900XL or 3500XL, right? I'm not sure how this would be configured on a Set-command switch like a 5000. And IIRC, multi-vlan ports are not allowed if there are any trunk ports configured on that switch, so that's something to watch for. I might be wrong on

Re: %Error opening tftp

On Wed, 5 Jul 2000, Lugo, Ramon wrote: > I configured a 2620 Cisco router using Cisco CofigMaker and now is doing > this. Don't do that, then. :-) Seriously, learn to use the command line. > %Error opening tftp://255.255.255.255/network-confg (Timed out) > %Error opening tftp://255.255.255

Certification Stats

Where does one find the current counts on how many CCNA, CCDA, CCNP, CCDP's there are in the world? I know that cisco has a web page that posts the number of CCIE's, but they dont have the others. Thanks, wendell ___ UPDATED Posting Guidelines: http://www.groups

Re:

Off the top of my head, I would try two things. First set the idle-timeout value to it's highest value and define ALL traffic to be interesting under the Dialer-List statements. This should keep the line up if you have ANY traffic flowing across the line. You could then setup a ping statement t

VOIP and QOS questions

We currently have 4 offices, 2 in the Pittsburgh area and 2 in California (one is Saratoga and one being built in San Fran). The plan is to connect each one through a dedicated T1 line for redundancy and VOIP and video conferencing purposes. I was planning on installing 3548 XL switches in all of

RE: Access Lists

Extended ACLs place the source address first, so that line should read: access-list 101 deny ip 10.0.0.0 0.255.255.255 192.168.0.0 0.0.255.255 access-list 101 permit ip any any Even this won't have the entire desired effect. This may prevent the setup of TCP connections, but UDP traffic from th

Re: your mail

I usually just put dialer idle-timeout 2147483, I think this is the max number of seconds you can put on it, and have had pretty good luck with the connection not timing out. On Wed, 5 Jul 2000, Nahrajieh D.Anggaon wrote: > Hello, > > How do you disable "dialer idle-timeout" and set the DDR

OT: Justifying CIR Increases

How do you justify increasing CIRs? My manager wants to know if I am/AT&T's network is dropping packets on the PVC. We exceed the CIR of 16k for up to 90k sometimes - but my manager doesn't see a problem with this since no one at AT&T can confirm 100% that we are dropping packets when we see co

RE: %Error opening tftp

Thank you Jay!!! -Original Message- From: Jay Hennigan [mailto:[EMAIL PROTECTED]] Sent: Wednesday, July 05, 2000 1:43 PM To: Lugo, Ramon Cc: [EMAIL PROTECTED] Subject: Re: %Error opening tftp On Wed, 5 Jul 2000, Lugo, Ramon wrote: > I configured a 2620 Cisco router using Cisco CofigMak

Re: OT: Justifying CIR Increases

At a router command line, type "show frame pvc". Look at the stats for In DE Pkts and Dropped Packets for the PVC in question. This will show you the number of packets that crossed that PVC while over your CIR, and also the actual number of packets dropped. It's probably best to clear your coun

Lab setup

I have two 2500 series routers(2 serial, 1 ethernet) and a 1600 series router (1 serial, 1 ethernet). What is the best way to setup a lab with this equipment? What types of cables? I also have a couple of CSUs if needed. Thanks ___ UPDATED Posting Guidelines: htt

Looking for CISCO Study Group in South Jersey

Hi , I'm Clarence Cummings, a Senior Network Engineer supporting the FAA's Air Traffic Control System at the Atlantic City International Airport. I have a BSEE, MSSM, NETWORK+, I-NETWORK+, CCNA, and is currently studying for my CCIE Qualification Exam. I live in Camden County and is looking to par

Re: Lab setup

I would have one of the 2500's as the core router connected to both of the others through it's serial ports. I say this because you can't have more than one wan link with the 1600 series, so it has to be one of the outers. Have a desktop connected to a hub that is connected to the 2 outer route

Re: Yippeeeeee!

I thought you couldn't mix 1.0 and 2.0 tests? (there are 2-1.0's and 2-2.0's listed here for CCNP) Adam Hickey [EMAIL PROTECTED] - Original Message - From: "woody" <[EMAIL PROTECTED]> Newsgroups: groupstudy.cisco To: <[EMAIL PROTECTED]> Sent: Monday, July 03, 2000 6:05 AM Subject: Yippe

Re: OT: Justifying CIR Increases

One quick correction on the reply below. The dropped packet counter in the "show frame-relay pvc" is defined as the following: dropped pkts: Number of incoming and outgoing packets dropped by the router at the Frame Relay level. So the counter it is not reflecting the amount of packets dropped i

Cisco/CoVad un bridge

Is anyone using a Cisco router with CoVad un bridge ?  I need to setup an VPN with IPSEC and I need to start the VPN in the router and all CoVad will sell me is Netopia.       Ryan V. FinneseyNetwork Administrator @tmosphere Interactive 1375 Broadway, 11th floor New York, NY 10018 212 827 25

Re: OT: Justifying CIR Increases

That's a good point! How would the router even know that a packet was dropped in the cloud? It wouldn't. Thanks for the correction, John > One quick correction on the reply below. The dropped packet > counter in the "show frame-relay pvc" is defined as the > following: > > dropped pkts:

Re: Should I read another book??? (4-CCDA)

I see... I check on www.borders.com and they had the same book for $38.50... way less than the $55 that Amazon wanted for it Here's a link.. http://search.borders.com/fcgi-bin/db2www/search/search.d2w/Details?code=157 8700698+&mediaType=Book&searchType=ISBNUPC&prodID= Be careful of

What kind of router do I need?

Ok, I've just spent all morning on Cisco's site (our rep is out of town) and can not make heads or tails of what I need to buy. What I have is a mixed IP, IPX, and Token Ring network. There are some NT boxes, some Netware boxes and an AS400 (clients connect via IP client). I'm going to install a

Preparing for the CCNP Certification

Hello everyone. I am new to this list. I am shooting for the CCNP 2.0 certification by December 2000. Can anyone suggest routers,switches,and books that I should be looking into. My desire is to setup a LAB at home. Take an exam every month. I do not have the money for the CISCO 5 day classes.

Re: Yippeeeeee!

This has been covered so many times... In the Cisco FAQ on certification it clearly states that you can mix and match 1.0 and 2.0 exams. I am also a "mixed" CCNP. I passed the Support 2.0 (CIT) and the rest were 1.0 exams. I went onto the Galton site a few days after I wrote the Suppor

  1   2   >