I have red that page many times and search for manual keying also. . But
that didn't answer my question. Anyway I got an answer from cisco group
saying that
Basically yes. Each line in your ACL actually builds a separate tunnel, with
unique SPI's. If you use manual keys, you can only provide one s
Hello,
May I learn the current passing score of CIT and Swicthing exams ?
Thanks,
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57687&t=57687
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.h
1)I got traffic flowing from outside to dmz.I got a mail server sitting on
the dmz.
access-list acl_outside permit tcp any host mail eq smtp
Do I need to the following?or just the access-list will do?
static (dmz,outside) mail mail netmask 255.255.255.255 0
2)Can inside access DMZ without nat c
Hi all,
Problem solved - It was an arp issue !! such a simple thing :) The customer
had a rogue mac address on their layer 3 switch that was causing the
intermittent connectivity.
Thanks all for your help !!
""Elijah Savage III"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
Hi all,
I am have some GRE troubles and am look for some advice.
I have a 1721 DSL route IOS 12.2 ADSL over bridged Ethernet and an 827-V4
ADSL over bridged Ethernet. Both routers run NAT.
The problem is I can not get any connectivity over a GRE tunnel between the
two routers the tunnel ju
Hello,
My BCRAN test is just a few hours away. Any hints would really be welcome,
because I doubt whether my preparation is adequate!
Thanks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57691&t=57691
--
FAQ, list archives, and
Hi,
For CIT
No of Quest -58
Time to answer -105 min
Passing score -776
For Switching
No of Quest -57
Time to answer -105 min
Passing score -776
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, November 19, 2002 2:12 PM
To: [EMAIL PROTECTED]
Subject:
what I meant was from the IOS from routing blade/rp/msfc (was probably
trying to save on typing!!) when running in hybrid mode, the 6k can't see
the flash. But when upgrading from the hybrid to native it can't see the
flash until the IOS images are loaded, so when the SP changes console
ownership t
Here's something annoying that I came across yesterday... any clues as to
what's going wrong would be very much appreciated.
Scenario:
HP NetServers with built-in 100M NICs, based on an Intel chipset.
With the HP drivers, the performance is fine - as you'd expect from a 100M
connection. With Int
Like most networking problems it depends. How large is your switch domain?
Are you doing End to End VLANs or Local? How large is your STP domain now?
Will it grow larger? Here a link I would start with
http://www.cisco.com/warp/customer/473/21.html ( stater for VTP)
then hit this one
http://www.
Depending on the size of the network VTP is being deployed, you can divide
the VTP domain into geograhical area or sites that would decrease the VTP
traffic.
>
> From: "Zim"
> Date: 2002/11/19 Tue AM 07:01:02 EST
> To: [EMAIL PROTECTED]
> Subject: Re: VTP modes Server/Client vs Transparent [7:576
Do you mind or can you be a little more detail with this. Was it a
duplicate mac address which never should happen but does from time to
time (remember the old kingston flaw in the early 90's about 150,000 nic
cards same mac).
Or was it a duplicate ip address. I could see if it was a duplicate ip
w
I would like to buy the subject course book that someone has taken in a
class.
Please send an email to [EMAIL PROTECTED]
Thank you in advance for your consideration.
John Huston
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57699&t=57699
---
If you get this to work keep me/us informed as I am sure you will.
Because I could never get this to work, I actually had to buy another
1gig nic and still the drivers did not work correctly actually eneded up
just using fast etherchannel which is working great.
-Original Message-
From: Ma
Thanks Dave!
""MADMAN"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I think it's only supported on the 1700 series routers. Try a HW/SW
> compatibility lookup.
>
> Dave
>
> "Thomas N." wrote:
> >
> > Hi All - I am wondering if the 1-Ethernet WIC card (WIC-1ENET) works
with
Hi,
Anyone knows which pin is transmit and which is receive on the Big ESCON
connector? I onlt find there are marked as A and B but I dont know which is
Tx and which is Rx
Anyone can help?
:)
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57702&t=57702
---
Hi
I have a VPN 3005 Concentrator, that establishes an Ipsec 3des tunnel to a
828 router, the router has uppgraded memory and 3des sofware.
the router is connectd to my via a 2mbits line, and workes fine, but when I
establish the vpn tunnel the performance drops down to something line
256Kbits, a
I cannot see the 172.24.1.0 0.0.0.255 in your ACL. It seems to be missing
!!
""Stephano Mwendo"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hallo guys,
>
> I have applied the following access list 3 for the line vty 0 4 in order
to
> limit telnet access to the router for int
Arni,
I believe the throughput of the 800 series is about 384Kbps when doing
encryption, so you might want a bigger router.
Cheers!
--
Richard A. Deal
Visit my home page at http://home.cfl.rr.com/dealgroup/
Author of Cisco PIX Firewalls, CCNA Secrets Revealed!, CCNP Remote Access
Exam Prep, CC
Both CCDA and CID are requirements regardless of CCNP status.
Jarett
""Vinh Le"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
>
> Does anyone know if both CCDA & CID #640-025 exams are required in order
to
> get CCDP if you possess a CCNP? Or just CID #640-025 exam is
Ramesh,
As to routing, the PIX will forward packets from one interface to another,
but you have to do certain things to accomplish this:
>From higher security level to lower, you need nat and global commands; from
lower to higher, you need static and access-list commands.
Fro external people acce
Hi,
Does anybody know of any document on CCO which provides details regarding
the Naming conventions employed for CatOS and switch IOS's image filenames.
(I have found docs for router IOSes but none for CatOS)
Thanks in advance
Simon
Message Posted at:
http://www.groupstudy.com/form/read.ph
Thanx for the info, can you or anyone point me to a page at cisco.com that
has info about the performance off these routers, I feel better if I can
point the customer at some official cisco information about the performance
of his router
Message Posted at:
http://www.groupstudy.com/form/read.php?
I now this is somewhat off topic but, I am confident you can give me some
valid input about this,
My company is thinking about buying NetIQ´s Chariot software, any one here
have any good or bad experince with that product, and Is it as helpfull as
it seem for troubleshooting network problems.
can anyone believe how cheap these are going for? It makes it pretty
reasonable to get one for the content network specialist certification.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2070179172
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2066928817
$665 was the end price for o
As far as a firewall goes, yes, that should be sufficient. You'll want a
bunch of routers, a switch, and an isdn simulator as well though.
thanks,
-Brad Ellis
CCIE#5796 (R&S / Security)
Network Learning Inc
[EMAIL PROTECTED]
www.optsys.net (Cisco hardware)
""Johan Bornman"" wrote in message
[EM
Anyone else hear about the new CCSP cert that Cisco is offering?! It's
about time! Although I wish some of the other Professional level certs
would count towards it in some way... I also like the three new Specialist
level certs!
Thank you,
Joshua Green; MCSE, CCNA
[EMAIL PROTECTED]
City
Hi All,
Very rightly said that these messengers use so many servers and so many
ports that it's kind of impossible to block them all. But you can very
easily do it, right on the OS level. I know about the Win2K that you can set
up some system policies with which you can directly block these exes
What is the best book to buy for the CCDP test?
Thanks.
On Tue, 19 Nov 2002 15:54:42 GMT "J.D. Chaiken" wrote:
> Both CCDA and CID are requirements regardless
> of CCNP status.
>
> Jarett
>
> ""Vinh Le"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hi all,
> >
> > Does
What is the best book to buy for the CCDP test?
Thanks.
On Tue, 19 Nov 2002 15:54:42 GMT "J.D. Chaiken" wrote:
> Both CCDA and CID are requirements regardless
> of CCNP status.
>
> Jarett
>
> ""Vinh Le"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hi all,
> >
> > Does
Yes and I have done it all via the PIX
Where you run into problems is when they use port 80.
Rob
Rob H Mears III, CCNP, MCSE, NNCDS, NNCSS, CNE, A+
LAN Engineer and Technical Mercenary
Valor Telecom
469.420.2656
-Original Message-
From: vikramjskeer [mailto:[EMAIL PROTECTED]]
Sent: Tue
I have a few questions concerning Nortel and Cisco connectivity:
Can I trunk multiple links between Cisco and Nortel(Passport 8000 or Bay450)?
IF so how?
Can Cisco support MLT or SMLT to Passport 8600?
Can a Nortel support fast etherchannel?
Will it support 802.3ab?
Is there a differ
I've heard that Priscilla Oppenheimer's book, "Top-Down Network Design", is
the best book for this exam.
Shawn K.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, November 19, 2002 11:51 AM
To: [EMAIL PROTECTED]
Subject: Re: Question for CCDP [7:57667]
Thanks for the clarification everyone.
One more thing, does the "Top-Down Network Design" from Priscilla
Oppenheimer covers both exams (CCDA & CID)?
""Kaminski, Shawn G"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I've heard that Priscilla Oppenheimer's book, "Top-Down Netwo
In addition to Priscilla's invaluable work:
CID: Cisco Internetwork Design
ISBN 0072126531 - $42.95 new at bookpool.com - $42 new $7.82 used at
amazon.com
Cisco Internetwork Design (Cisco Press)
ISBN 1578701716 - $46.50 new at bookpool.com - $60 new $8.50 used at
amazon.com
-Original Messa
I used it to prep for both exams, supplemented by reading some
action-packed, edge-of-your-seat CCO material on SNA. Ciscopress does have
separate books for the ccda and ccdp, but I've never laid my hands on either
of them. My advice is, if you're going to get a book to supplement top-down,
go big
We have it where I work and it, like any other tool has it's strong and weak
points.
Comes with several scripts but for QOS testing you may have to modify them
yourself.
For basic testing I found it easy and effective to use.
Most here that have used it like it very much, but add that it is very
co
Thanks a lot for the feedback about Token Ring and IPX.
I am very disapointed with the email I received from a Cisco's guy saying
that Token Ring and IPX was no longer in the test; I attached the email on
that discussion.
It is very sad that an important information comes wrong from the main
sour
Well, Priscilla's Book covers the material. I had problems reading it
though. I've gotten so used to reading poorly written technical books, that
whenever I find a passage that is really readable I assume it's fluff and
skip past it. Since most of her book is readable and well written, I found
Joshua
The CCSP is basically just a realignment of the current Cisco Security
Specialist 1 certification into the Cisco Professional track. It does
add one more exam to the requirements but other than that no real
change. Cisco has even 'generously' allowed current CSS1s to take the
remaining exam
Good Info!
I tried following the link for those new Specialist certs on Cisco's site,
but the link is broken - are Specialists defined now by completing only the
individual exams? (CSPFA for Firewall, CSVPN for VPN, and CSIDS for IDS)
-Original Message-
From: ""Peter.Walker:[EMAIL PROTECTE
Nevermind - sometime earlier they enabled the links...
-Original Message-
From: Creighton Bill-BCREIGH1 [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, November 19, 2002 3:07 PM
To: [EMAIL PROTECTED]
Subject: RE: CCSP [7:57713]
Good Info!
I tried following the link for those new Specialist ce
""Priscilla Oppenheimer"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> hktco wrote:
> >
> > When I learned it for CCNA and CCNP, I was told that IGRP is
> > Cisco
> > proprietary. Until recent, I was being told that IGRP is no
> > longer
> > proprietary
> > and became an open s
Hi Folks, Does anyone know if PIX or VPN Concentrators support GRE to enable
multiprotocol routing such as EIGRP.I have 10 branches and am thinking to
replace my FR clould with site-to-sit VPN. IPSEC doesn'tsupport
multiprotocol routing such as EIGRP and requires GRE to work in parallel. As
far as
Thanks for the reply.
The problem is upon boot up I am getting only garbled asci characters and
the screen appears to be frozen. It don't let me see anything and type
anything to implement your suggestion...sorrry. I welcome if you could tell
me some alternative...thanks a lot!
thanks
Robert M
the last time I checked, the answer was "no" to either one. it has been
several months, but at that time the Cisco position was "why would you want
to" and there were several preferred means of terminating secure tunnels on
either device.
--
TANSTAAFL
"there ain't no such thing as a free lunch"
Bill
To gain the new specialist certs you need MCNS plus the current relevent
exam (CSPFA, CSVPN or CSIDS). To gain the CCSP you need to pass MCNS,
CSPFA, CSVPN, CSIDS and the new SAFE exam.
Peter
Creighton Bill-BCREIGH1 wrote:
>
> Good Info!
> I tried following the link for those new Speciali
For those who havent already seen the announcement.
Original Message
Subject: New Cisco Certified Security Professional
Date: Tue, 19 Nov 2002 11:01:39 -0500 (EST)
From: Cisco Systems Inc
Every organization has data, facilities, and workflow processes that
are mission critica
Yes, along with 640-100 (MCNS)
Thank you,
Joshua Green; MCSE, CCNA
[EMAIL PROTECTED]
CityScape Communications
2040 Timberbrooke Drive
Springfield, IL 62702
(217) 793.6238 x18
(217) 793.6275 fax
(217) 306.6201 cell
-Original Message-
From: Creighton Bill-BCREIGH1 [mailto:[EMAIL PRO
Presently we run end to end vlans w/LANE. We are going to the gigabit
ethernet design with end to end vlans. We plan for a slow migration to local
vlans. Once the migration to local vlans is complete then a server/client
model might be more efficient. Talking to another network professional,
transp
PIX supports GRE, i have setup GRE tunnel between my 2 sites. Here is link
which might helps you.
http://www.cisco.com/en/US/tech/tk648/tk367/technologies_configuration_examp
le09186a00800a43f6.shtml
thanks,
--
Curious
MCSE, CCNP
""The Long and Winding Road"" wrote in
message [EMAIL PROTECTE
Does anybody know if the PIX will support the client side TCP encapsulation
of VPN traffic in the near future, or must you buy a VPN concentrator to get
this feature??
Thanks
CG
**
This email and any files transmitted with it
took the exam today and passed, barely. of the 4 it was by far the hardest.
ccdp next and then, well who knows. perhaps i'll finish that piano concerto
thanks all.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57741&t=57741
Edward Sohn wrote:
>
> Perfect...
>
> very interesting, indeed. I have long wondered about this
> scenario, and
> have wondered how companies are implementing their site-to-site
> VPN's
> over the internet. so you're saying (regarding your own roll
> out), that
> your ISP assigned you two addre
Wondering if anyone has set their OSPF link costs based on
link distance instead of based on interface bandwidth. As
link speeds increase, corresponding serialization delay
decreases. So another possible value one might use for link
"cost" is the distance of the link instead of based on interface
That is basically what I was saying in my email that he had 6 addresses
to use so I am confused why there even needs to be another solution.
Making it a lot harder than what it has to be.
-Original Message-
From: Priscilla Oppenheimer [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, November 19,
On Tue, 19 Nov 2002, Arni V. Skarphedinsson wrote:
> My company is thinking about buying NetIQ4s Chariot software, any one here
> have any good or bad experince with that product, and Is it as helpfull as
> it seem for troubleshooting network problems.
Contact me off list and I can answer a lot o
Second call for this one. I never received any answers to my question. I
want to know how to setup the link between the VoIP phones and the FXO's.
Basically a dialplan, but how do I route inbound calls from the PSTN to
the VoIP phones? And how do I route outbound calls from the VoIP phones over
Elijah Savage III wrote:
>
> That is basically what I was saying in my email that he had 6
> addresses
> to use so I am confused why there even needs to be another
> solution.
You didn't say how he would use the 6 addresses. I thought it needed
spelling out.
> Making it a lot harder than what it
Andrew
The following links will explain in full details how to accomplish what you
want
Juan Blanco
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/voice
_c/vcprt1/
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/mult
i_c/mcprt1/
http://www.
On Tue, 19 Nov 2002, Juan Blanco wrote:
> Andrew
> The following links will explain in full details how to accomplish what you
> want
Thanks, BUT...I had already found all of those URL's. They show how to
create a dial plan to send the data across a "cloud" but they never show
how to do
""Curious"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> PIX supports GRE, i have setup GRE tunnel between my 2 sites. Here is
link
> which might helps you.
>
>
http://www.cisco.com/en/US/tech/tk648/tk367/technologies_configuration_examp
> le09186a00800a43f6.shtml
I don't know
I tried to set up a TFTP server on solaris. When I do "write net" on
router, I got "TFTP: error code 2 received - Access violation" error
message unless I create a destination file first. How do I fix this
problem? Many thanks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57
Let me know if some one use there CBTes from Cisco, If it is worthed to
invest money on these CBTes.
CISCO NETWORKING BULK CBT BUNDLES 1-2 30 CD's
CISCO Switched Routing Training CD
CISCO Security Training CD
CISCO Call Manager-VOIP 3.0 AVVID Training CD
CISCO Voice & Video Technologies CD
CISCO C
Well, that's basically how TFTP works on Unix-style systems. You have to
first create the file (i.e., 'touch cisco-confg'), then give everyone
write permissions to it (i.e., 'chmod 666 cisco-confg') before it can be
written by the TFTP server. As far as I know, there's no way to
circumvent that usi
We can refer to a dictionary?, it that true.
Thanks
-Original Message-
From: Kevin Phua [mailto:[EMAIL PROTECTED]]
Sent: 19 November 2002 14:13
To: [EMAIL PROTECTED]
Subject: Re: 640-901 BSCI [7:57599]
I think 105min is the standard time (30 mins additional) if the exam is
taken in non
check your line speed on hyperterm/secureCRT/ whatever.. you probably
have a mismatch
Charles
""Robert Massiache"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Thanks for the reply.
>
> The problem is upon boot up I am getting only garbled asci characters and
> the screen
Hi,
I have a doubt while reading the IP telephony Book,
In a Centralized Model of IP telephony,where there is a hub site and two
spoke
site.And all phones in the spoke site register with the Hub Call manager.My
question is if the Wan link goes down how the phones in the spoke1 will
communicated w
Can somebody please send me a url where I can find out more about this
certification.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57757&t=57757
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco
I am planning to give CCIE R&S. Can anyone please send me some question bank
which can help me for the exam.
Rgds
Kavita
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=57758&t=57341
--
FAQ, list archives, and subscription info: ht
70 matches
Mail list logo