Re: does vtp can span the router [7:18545]
sorry, test only Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18568&t=18545 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: what is the native vlan function in trunk? [7:18543]
Dave, what you wrote is correct for 802.1q trunks. However, ISL tags all frames, and 'native vlan' in ISL context is vlan to which the port will be assigned if trunking is disabled (by DISL, DTP, or via CLI). See: http://www.cisco.com/warp/public/793/lan_switching/2.html Regards, Sasa Dave wrote: > > Trunking is means of transporting multiple VLANs over a single link. This > is done by the tagging the frames according to which VLAN they belong to at > both ends of the trunk so they can be separated at the other end. If 10 > VLANs are being trunked, how many need to be tagged? Just nine, because > both ends agree that the untagged VLAN is the native VLAN. > > Since both ends believe that any untagged frames belong to the VLAN that is > configured as the native VLAN, you can see this could cause some serious > problems if different VLANs are configured as the native VLAN at each end of > the trunk. > > Native VLAN mismatches can also cause some really nasty bridging loops in a > large switched enviorment if you get multiple Spanning Tree negotiations > going at the same time. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18569&t=18543 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: H323/VoIP info [7:18451]
Yep this is a large range of udp ports but I can't see a way round that cheers ""Peter Slow"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > -Original Message- > From: Peter Slow > Sent: Tuesday, September 04, 2001 1:46 PM > To: 'Patrick Donlon' > Subject: RE: H323/VoIP info [7:18451] > > > but what about the RTP streams? the pix has always been able to do h323 > filtering / fixup protocol for the h323 stuff. i've never gotten voip to > work thru a PIX with out leaving an enormous hole for a static NAT > translation or for UDP port mapping w/tcp 1719&1720 > -Peter > > -Original Message- > From: Patrick Donlon [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, September 04, 2001 1:28 PM > To: [EMAIL PROTECTED] > Subject: H323/VoIP info [7:18451] > > > For those of you with an interest in VoIP and H323, the PIX 525 with version > 5.3(2) does work with static NAT (and no NAT). > > cheers Pat Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18571&t=18451 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Vlans and trunking [7:18442]
Thanks for the comments, what they're doing is assigning a small number of vlans 2 to 3 on the switches and linking them, so no problems with VLAN 1 but obviously this approach doesn't scale cheers Pat ""Patrick Donlon"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I'm familiar with the concept off using vlan trunks to send vlan information > to a connected switch, however I've been working on a new site and have > discovered that they use a different approach. I was surprised to find that > they just plug in the port off one switch straight into the next switch with > a crossover and off they go. > This works but could someone point out the pitfalls off such an approach > > cheers > > Pat Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18570&t=18442 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCNA question with routing setup [7:18572]
I have 2 2501 routers setup as follows: RouterA eth0 with 192.168.254.1/24 RouterA serial 0 with 192.168.100/24 setup as DTE, no shutdown, router rip network 192.168.0.0 RouterB eth0 with 192.168.50.1/24 RouterB serial 0 with 192.168.100.11/24 setup as DCE, clock rate 64000, no shutdown, router rip network 192.168.0.0 My problem is it won't see any of the networks...do I have this number setup wrong? when I setup a static IP ROUTE..the networks work fine and see each other its just with RIP for some reason is unable to see the other networks...what am I doing wrong? thank you all Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18572&t=18572 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: backing up IOS on workstation [7:18512]
Kiwi is great and free :), but these guys have one just as great and free http://solarwinds.net (Just thought i might add that) - Original Message - From: Michael L. Williams To: Sent: Wednesday, September 05, 2001 4:40 AM Subject: Re: backing up IOS on workstation [7:18512] > Funny you mention Kiwi although I don't use their TFTP software, I > do use their FREE syslog daemon.. works great. > So if you need to keep a log or output alot of debug, the Kiwi syslog daemon > is GREAT!!! > > Mike W. > > "Ednilson Rosa" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Try Kiwi's Cat Tools: > > > > http://www.kiwi-enterprises.com/ > > > > There are free versions for download. > > > > ER > > - Original Message - > > From: > > To: > > Sent: Tuesday, September 04, 2001 8:09 PM > > Subject: backing up IOS on workstation [7:18512] > > > > > > I would like to know if there is a software or method that will allow me > to > > backup the IOS to my windows ME workstation? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18573&t=18512 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCNA question with routing setup [7:18572]
You have to announce classfull networks in RIPv1 : for router A : router rip network 192.168.254.0 for router B : router rip network 192.168.50.0 if it doesn't work with this, try debug ip rip -- Stephane LITKOWSKI Student in a french computer science school EPITA Telecom & Network specialization CISCO Certified Network Associate EMail : [EMAIL PROTECTED] a icrit dans le message news: [EMAIL PROTECTED] > I have 2 2501 routers setup as follows: > > RouterA eth0 with 192.168.254.1/24 > RouterA serial 0 with 192.168.100/24 > setup as DTE, no shutdown, router rip > network 192.168.0.0 > > RouterB eth0 with 192.168.50.1/24 > RouterB serial 0 with 192.168.100.11/24 > setup as DCE, clock rate 64000, no shutdown, router rip > network 192.168.0.0 > > My problem is it won't see any of the networks...do I have this number setup > wrong? when I setup a static IP ROUTE..the networks work fine and see each > other its just with RIP for some reason is unable to see the other > networks...what am I doing wrong? > > thank you all Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18574&t=18572 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCNA question with routing setup [7:18572]
RIP is a classful protocol, and so assigns each network statement a mask based on the first octet of the statement. So 192.168.x.x is automatically a class C network since its first octet starts in the Class C range. Try putting each class C in the configuration with the network statement, 192.168.254.0, 192.168.100.0, and 192.168.50.0. The statement "network 192.168.0.0" says that only interfaces within the 192.168.0.1-254 range are participating in RIP. Hope this solves the problem. Guy -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 05, 2001 4:39 AM To: [EMAIL PROTECTED] Subject: CCNA question with routing setup [7:18572] I have 2 2501 routers setup as follows: RouterA eth0 with 192.168.254.1/24 RouterA serial 0 with 192.168.100/24 setup as DTE, no shutdown, router rip network 192.168.0.0 RouterB eth0 with 192.168.50.1/24 RouterB serial 0 with 192.168.100.11/24 setup as DCE, clock rate 64000, no shutdown, router rip network 192.168.0.0 My problem is it won't see any of the networks...do I have this number setup wrong? when I setup a static IP ROUTE..the networks work fine and see each other its just with RIP for some reason is unable to see the other networks...what am I doing wrong? thank you all Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18575&t=18572 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
http [7:18576]
hi how can i block http trafic in cisco 1750 plz help me kaushalender Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18576&t=18576 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
which books in better for support 2.0?? [7:18577]
Dear friends, I am going for the support 2.0 exam. May I know which book is better? is that 1)Cisco Internetwork Troubleshooting ISBN: 1578700922 or 2)Cisco CCNP Support Exam Certification Guide ISBN: 0735709955 Besides, may I know which book is better for routing 2.0? is that Building scalable cisco networks published by CISCO or the one published by Sybex.?? Please advise _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18577&t=18577 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: how to build a pix firewall out of a PC box. [7:18335]
I am very interested too plese add me to the list -Original Message- From: mike johnson [mailto:[EMAIL PROTECTED]] Sent: Monday, September 03, 2001 10:59 PM To: [EMAIL PROTECTED] Subject: how to build a pix firewall out of a PC box. [7:18335] Hi Everyone, For those who are interested in learning Cisco PIX but do NOT want to spend a lot of money on buying an expensive PIX Firewall, I think I can help you. I have instructions on how to build a PIX firewall by using a PC. In case you didn't know, PIX firewall is essentially a PC with multiple interfaces. I've successfully built several PIX firewall using my old PCs (i.e. pentium 200 MHz processor). Actually, the PIX1 series (obsolete I know) is a PC with Intel EtherExpress Interface cards. However, you must have an account with CCO in order the software and download the software. The rest of the instructions on how to build a PIX firewall using PC is very simple. Anyone interested in learning it, let me know. Mike __ Do You Yahoo!? Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger http://im.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18578&t=18335 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Token ring interface does not up. [7:18549]
Request for a help. On a cisco 7200 series (router coneected as gateway router), I have configured to HSSI ports on router 1 as one for Transmit and other for receive. At other end on router 2, it is vice versa and router is connected to intranet. The encapsulation is frame relay, point-to-point link with IP address defined on each interface using 255.255.255.252 subnet. In above configuration, can I ping the transmit interface of router 1 from my router 2? (The answer appears to me as No but I would like to confirm) Kiran _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18579&t=18549 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Token ring interface does not up. [7:18549]
Request for a help. On a cisco 7200 series (router coneected as gateway router), I have configured to HSSI ports on router 1 as one for Transmit and other for receive. At other end on router 2, it is vice versa and router is connected to intranet. The encapsulation is frame relay, point-to-point link with IP address defined on each interface using 255.255.255.252 subnet. In above configuration, can I ping the transmit interface of router 1 from my router 2? (The answer appears to me as no but I would like to confirm) Kiran _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18580&t=18549 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Upgrade IOS for router 2501 [7:18581]
Hi all, Router: 2501 IOS: 9,14(9) Flash: 4MB Ram:4MB Problem: Can't upgrade IOS to any version. (Try 10.3 - (igs-in-l.103-13.bin) - and it is fulfill the HW config). Show check-sum error. I would like to upgrade the IOS for 2501 router using tftp server which is directly connected to my tftp server (Cross cable), unfortunately, it was fail. The OS can be downloaded to the flash successfully, but it was fail in checking checksum. It shown "invalid check-sum". What is the problem? Thanks! Regards, Lithium - Router(boot)#sh ver 3000 Bootstrap Software (IGS-RXBOOT), Version 9.14(9), RELEASE SOFTWARE (fc1) Patchlevel = 9.1(12.6) Copyright (c) 1986-1994 by cisco Systems, Inc. Compiled Wed 28-Sep-94 14:10 by chansen System Bootstrap, Version 4.14(9.1), SOFTWARE Router uptime is 1 day, 0 minutes System restarted by power-on Running default software cisco 2500 (68030) processor (revision A) with 2044K/2048K bytes of memory. Processor board serial number 01260438 DDN X.25 software, Version 2.0, NET2 and BFE compliant. 1 Ethernet/IEEE 802.3 interface. 2 Serial network interfaces. 32K bytes of non-volatile configuration memory. 4096K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 I have a router 2501 and would like to upgrade its IOS Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18581&t=18581 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ospf + hsrp [7:18582]
Hi Guys, We are implementing a network using ospf and hsrp. Someone told us that there are issues with these two, are you aware of any issues and if so please share them with us. thanks venite Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18582&t=18582 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CIR/MIR and PIR [7:18583]
What would be the ideal CIR/PIR and MIR settings for a DS0 line where I would require to send 4 calls of G.729a compression and data messages of 8 kb size. I have separate DLCI's alloted for the Data and Voice. Also on the Frame Switch what is a QIR ? Thanks in advance sunil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18583&t=18583 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
100persent CPU Utilization [7:18584]
Dear all, All of sudden my router CPU utilization goes to 100persent and suddenly it will come down to 17 present, I really don't know the exact reason. But at the particular time the BGP route utilization goes up to 70persent. We enabled ip cef. Please can some suggest me how to solve this problem. #sh process cpu CPU utilization for five seconds: 100%/19%; one minute: 31%; five minutes:28% PID Runtime(ms) Invoked uSecs5Sec 1Min 5Min TTY Process 8412846188 9182870 1398 52.57% 15.39% 9.16% 0 BGP Router 853552 19570181 0.00% 0.00% 0.00% 0 BGP I/O 86 1634352 12650 129197 0.00% 1.77% 1.77% 0 BGP Scanner with best regards, Prabhu Bangalore- India Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18584&t=18584 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: 2620 + NM-4T= WAS RE: Regarding cisco routers [7:18368]
Cisco 2600 series does not support NM-4T, incidentally Cisco 3600 series can not accept WIC-2 At 11:17 AM 9/4/01 -0400, Daniel Cotts wrote: >I don't believe that the NM-4T= four port serial module will work in any >2600 series router. Folks here on the list have mentioned using two WIC-2T= >with 2600s. Keep in mind that those modules require the SmartSerial cables. > > > -Original Message- > > From: Ahmed Mamoor Amimi [mailto:[EMAIL PROTECTED]] > > Sent: Tuesday, September 04, 2001 12:47 AM > > To: [EMAIL PROTECTED] > > Subject: Re: Regarding cisco routers [7:18368] > > > > > > 2509 was of worth for the old CCIE lab where u need it > > but now this > > router is been replaced with > > a KNOB SWITCH to get in to each router ... like the printer > > switch box used > > to swtich printer b/w PC. > > and for the CCNA/CCNP u really dont need to have it.. > > this router is > > good but also expensive... why waste > > money on that u dont want in the lab, the only benefit left > > with this router > > is eight ASYNC ports used for DDR > > and stuff... but this u can do it from every router that have > > an AUX port as > > AUX is an ASYNC port too. > > I think u should have a router with have atleast 4 serial > > ports so u can > > make that router a frame-relay switch. > > and in my opinoin u should buy a 2620 with 4 port serial > > module... by this u > > can have that router act as a > > frame-relay switch as it will have 4 serial and also can be used for > > inter-vlan routing b/w ur switches > > That will be a complete lab for CCIE level except token-ring > > switching and > > ATM. > > > > enjoy > > -Mamoor > > CCNP/CNE/MCT/MCSE/A+/NETWORK+/CCIE(writen) > > > > > > wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > I am considering purchasing a 2509 router because I need to > > telnet into my > > > other four without beating up on my PC serial ports. I > > currently own 4 > > > routers TWO 2501, ONE 2503, One 2514, also an isdn 804, > > catalyst 5000 and > > > 1900EN switch. I was told the 2509 would be a perfect > > addition since I > > > would > > > be able to log in utiilizing one console port on my PC to > > eight on the > > 2509 > > > router. Are there any other good uses of the 2509 other > > then consoling > > > in...for instancedo I need to have it for my CCNA or > > CCNP?? also > > should > > > I drop any of the other routers or do you think I should > > keep them...again > > > these routers are for studying only. > > > > > > P.s. I forgot to mention I also have a isdn simulator...sorry for > > > boasting..but I do need expert advice here and don't want > > to burn money on > > > things I don't need. > > > > > > thank you > > Report misconduct > > and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18585&t=18368 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: how to build a pix firewall out of a PC box. [7:18335]
I would be very interested to leartn how to do this. Dominick Marino [EMAIL PROTECTED] ""mike johnson"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi Everyone, > > For those who are interested in learning Cisco PIX but > do NOT want to spend a lot of money on buying an > expensive PIX Firewall, I think I can help you. I > have instructions on how to build a PIX firewall by > using a PC. In case you didn't know, PIX firewall is > essentially a PC with multiple interfaces. I've > successfully built several PIX firewall using my old > PCs (i.e. pentium 200 MHz processor). Actually, the > PIX1 series (obsolete I know) is a PC with Intel > EtherExpress Interface cards. However, you must have > an account with CCO in order the software and download > the software. The rest of the instructions on how to > build a PIX firewall using PC is very simple. Anyone > interested in learning it, let me know. > > Mike > > __ > Do You Yahoo!? > Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger > http://im.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18586&t=18335 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: backing up IOS on workstation [7:18512]
You can also go to this site and download 3-Com's tftp, ftp, syslog server. It works great and it is nice to have all three functions in one tool. http://www.certyourself.com/downloads.htm -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of paul Sent: Wednesday, September 05, 2001 4:03 AM To: [EMAIL PROTECTED] Subject: Re: backing up IOS on workstation [7:18512] Kiwi is great and free :), but these guys have one just as great and free http://solarwinds.net (Just thought i might add that) - Original Message - From: Michael L. Williams To: Sent: Wednesday, September 05, 2001 4:40 AM Subject: Re: backing up IOS on workstation [7:18512] > Funny you mention Kiwi although I don't use their TFTP software, I > do use their FREE syslog daemon.. works great. > So if you need to keep a log or output alot of debug, the Kiwi syslog daemon > is GREAT!!! > > Mike W. > > "Ednilson Rosa" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Try Kiwi's Cat Tools: > > > > http://www.kiwi-enterprises.com/ > > > > There are free versions for download. > > > > ER > > - Original Message - > > From: > > To: > > Sent: Tuesday, September 04, 2001 8:09 PM > > Subject: backing up IOS on workstation [7:18512] > > > > > > I would like to know if there is a software or method that will allow me > to > > backup the IOS to my windows ME workstation? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18587&t=18512 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: how to build a pix firewall out of a PC box. [7:18335]
Mike, I would also be interested in the instructions for building the PIX firewall from a PC Thank you in advance Debbie --- Tony Zhu wrote: > Me too. > > Kind Regards, > > Tony Zhu > > -Original Message- > From: VNithianandam [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, 5 September 2001 2:23 AM > To: [EMAIL PROTECTED] > Subject: RE: how to build a pix firewall out of a PC > box. [7:18335] > > > I would be interested in building a PIX firewall. > > Vini > > -Original Message- > From: Patrick Ramsey > [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, September 04, 2001 11:44 AM > To: [EMAIL PROTECTED] > Subject: RE: how to build a pix firewall out of a PC > box. [7:18335] > > > I would also be interested. Who was the original > poster of this message? > > -Patrick > > >>> "Raul F. Fernandez" 09/03/01 06:52PM >>> > Mike, > > I am most definitely interested. PLease e-mail me > the process if possible > for building a PIX firewall. > > Thank you in advance, > > Raul > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of > mike johnson > Sent: Monday, September 03, 2001 4:59 PM > To: [EMAIL PROTECTED] > Subject: how to build a pix firewall out of a PC > box. [7:18335] > > > Hi Everyone, > > For those who are interested in learning Cisco PIX > but > do NOT want to spend a lot of money on buying an > expensive PIX Firewall, I think I can help you. I > have instructions on how to build a PIX firewall by > using a PC. In case you didn't know, PIX firewall > is > essentially a PC with multiple interfaces. I've > successfully built several PIX firewall using my old > PCs (i.e. pentium 200 MHz processor). Actually, the > PIX1 series (obsolete I know) is a PC with Intel > EtherExpress Interface cards. However, you must > have > an account with CCO in order the software and > download > the software. The rest of the instructions on how > to > build a PIX firewall using PC is very simple. > Anyone > interested in learning it, let me know. > > Mike > > __ > Do You Yahoo!? > Get email alerts & NEW webcam video instant > messaging with Yahoo! Messenger > http://im.yahoo.com [EMAIL PROTECTED] __ Do You Yahoo!? Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger http://im.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18588&t=18335 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: how to build a pix firewall out of a PC box. [7:18335]
I would also like A copy of these instructions. Thank you. -Original Message- From: Richard [mailto:[EMAIL PROTECTED]] Sent: Tuesday, September 04, 2001 10:55 PM To: [EMAIL PROTECTED] Subject: Re: how to build a pix firewall out of a PC box. [7:18335] Count me in... ""mike johnson"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi Everyone, > > For those who are interested in learning Cisco PIX but > do NOT want to spend a lot of money on buying an > expensive PIX Firewall, I think I can help you. I > have instructions on how to build a PIX firewall by > using a PC. In case you didn't know, PIX firewall is > essentially a PC with multiple interfaces. I've > successfully built several PIX firewall using my old > PCs (i.e. pentium 200 MHz processor). Actually, the > PIX1 series (obsolete I know) is a PC with Intel > EtherExpress Interface cards. However, you must have > an account with CCO in order the software and download > the software. The rest of the instructions on how to > build a PIX firewall using PC is very simple. Anyone > interested in learning it, let me know. > > Mike > > __ > Do You Yahoo!? > Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger > http://im.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18589&t=18335 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: does vtp can span the router [7:18545]
I believe it means that the router will not listen to the vtp messages. It will also not pass them along- it is strictly layer 2. >From: "Guest" >Reply-To: "Guest" >To: [EMAIL PROTECTED] >Subject: does vtp can span the router [7:18545] >Date: Tue, 4 Sep 2001 23:54:23 -0400 > >i am reading the cit 4.1 ppt,on page 19,it says > >a router will be transparent for VTP(forward messages). > >what is that mean? _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18590&t=18545 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: how to build a pix firewall out of a PC box. [7:18335]
Believe if I could find the info it would be here. All I found on the newsgroup search was to search for Franken-Pix. If I find out any info it will be posted here so we can stop with the me-too's. I am sure he is overwhelmed now and hopefully he posts the info soon. Don - Original Message - From: "Debbie Westall" To: Sent: Wednesday, September 05, 2001 7:17 AM Subject: RE: how to build a pix firewall out of a PC box. [7:18335] > Mike, > > I would also be interested in the instructions for > building the PIX firewall from a PC > > Thank you in advance > > Debbie > > --- Tony Zhu wrote: > > Me too. > > > > Kind Regards, > > > > Tony Zhu > > > > -Original Message- > > From: VNithianandam [mailto:[EMAIL PROTECTED]] > > Sent: Wednesday, 5 September 2001 2:23 AM > > To: [EMAIL PROTECTED] > > Subject: RE: how to build a pix firewall out of a PC > > box. [7:18335] > > > > > > I would be interested in building a PIX firewall. > > > > Vini > > > > -Original Message- > > From: Patrick Ramsey > > [mailto:[EMAIL PROTECTED]] > > Sent: Tuesday, September 04, 2001 11:44 AM > > To: [EMAIL PROTECTED] > > Subject: RE: how to build a pix firewall out of a PC > > box. [7:18335] > > > > > > I would also be interested. Who was the original > > poster of this message? > > > > -Patrick > > > > >>> "Raul F. Fernandez" 09/03/01 06:52PM >>> > > Mike, > > > > I am most definitely interested. PLease e-mail me > > the process if possible > > for building a PIX firewall. > > > > Thank you in advance, > > > > Raul > > > > -Original Message- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]]On Behalf Of > > mike johnson > > Sent: Monday, September 03, 2001 4:59 PM > > To: [EMAIL PROTECTED] > > Subject: how to build a pix firewall out of a PC > > box. [7:18335] > > > > > > Hi Everyone, > > > > For those who are interested in learning Cisco PIX > > but > > do NOT want to spend a lot of money on buying an > > expensive PIX Firewall, I think I can help you. I > > have instructions on how to build a PIX firewall by > > using a PC. In case you didn't know, PIX firewall > > is > > essentially a PC with multiple interfaces. I've > > successfully built several PIX firewall using my old > > PCs (i.e. pentium 200 MHz processor). Actually, the > > PIX1 series (obsolete I know) is a PC with Intel > > EtherExpress Interface cards. However, you must > > have > > an account with CCO in order the software and > > download > > the software. The rest of the instructions on how > > to > > build a PIX firewall using PC is very simple. > > Anyone > > interested in learning it, let me know. > > > > Mike > > > > __ > > Do You Yahoo!? > > Get email alerts & NEW webcam video instant > > messaging with Yahoo! Messenger > > http://im.yahoo.com > [EMAIL PROTECTED] > > > __ > Do You Yahoo!? > Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger > http://im.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18591&t=18335 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: how to build a pix firewall out of a PC box. [7:18335]
I would be interested, too. thnks. > -Original Message- > From: A. Dominick Marino [mailto:[EMAIL PROTECTED]] > Sent: 05 septembrie 2001 15:00 > To: [EMAIL PROTECTED] > Subject: Re: how to build a pix firewall out of a PC box. [7:18335] > > > I would be very interested to leartn how to do this. > > > Dominick Marino > [EMAIL PROTECTED] > > ""mike johnson"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hi Everyone, > > > > For those who are interested in learning Cisco PIX but > > do NOT want to spend a lot of money on buying an > > expensive PIX Firewall, I think I can help you. I > > have instructions on how to build a PIX firewall by > > using a PC. In case you didn't know, PIX firewall is > > essentially a PC with multiple interfaces. I've > > successfully built several PIX firewall using my old > > PCs (i.e. pentium 200 MHz processor). Actually, the > > PIX1 series (obsolete I know) is a PC with Intel > > EtherExpress Interface cards. However, you must have > > an account with CCO in order the software and download > > the software. The rest of the instructions on how to > > build a PIX firewall using PC is very simple. Anyone > > interested in learning it, let me know. > > > > Mike > > > > __ > > Do You Yahoo!? > > Get email alerts & NEW webcam video instant messaging with Yahoo! > Messenger > > http://im.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18595&t=18335 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Can you pass CCNP w/o having Cisco gears? [7:18124]
Now, if I could only get my wife the RP+TPGOTT certification. (Replaces Toilet Paper + Toilet Paper Goes Over The Top) David Blair ""Buri, Heather L."" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Wow Tony, I am impressed! Can I send my husband over to be trained by you? > ;-) > > Heather > > > -Original Message- > > From: Tony Medeiros [SMTP:[EMAIL PROTECTED]] > > Sent: Sunday, September 02, 2001 4:59 PM > > To: [EMAIL PROTECTED] > > Subject: Re: Can you pass CCNP w/o having Cisco gears? [7:18124] > > > > After 9 years of marrige, I can say I am fully certified at the MPDL. > > > > Tony M > > CCIE #6172, MPDL+RP > > (Male Puts Down Lid + Replaces [toliet paper] Roll) > > > > - Original Message - > > From: "Leigh Anne Chisholm" > > To: > > Sent: Sunday, September 02, 2001 2:31 PM > > Subject: RE: Can you pass CCNP w/o having Cisco gears? [7:18124] > > > > > > > Sorry Christopher, but the CFTA certification isn't worth anything > > anymore. > > > It's been eclipsed by MPDL. If you've got that, you're a highly sought > > > after commodity. Your value skyrockets! > > > > > > What's MPDL you ask? Why, "Male Puts Down Lid" of course! > > > > > > > -Original Message- > > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > > > > Christopher Supino > > > > Sent: Sunday, September 02, 2001 3:06 PM > > > > To: [EMAIL PROTECTED] > > > > Subject: RE: Can you pass CCNP w/o having Cisco gears? [7:18124] > > > > > > > > > > > > Nice Chuck. Don't forget to add CFTA(Certified Flush Toilet > > > > Administrator), > > > > and MCBD(Miller Certified Beer Drinker). > > > > > > > > :) > > > > > > > > Chris > > > > > > > > -Original Message- > > > > From: Chuck Larrieu [mailto:[EMAIL PROTECTED]] > > > > Sent: Sunday, September 02, 2001 3:22 PM > > > > To: Christopher Supino; [EMAIL PROTECTED] > > > > Subject: RE: Can you pass CCNP w/o having Cisco gears? [7:18124] > > > > > > > > > > > > -Original Message- > > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > > > > Christopher Supino > > > > Sent: Sunday, September 02, 2001 12:18 PM > > > > To: [EMAIL PROTECTED] > > > > Subject: RE: Can you pass CCNP w/o having Cisco gears? [7:18124] > > > > > > > > When did CCIE Written become a certification? I take serious issue > > with > > > > engineers who do this. It only adds to the cheapening of the > > > > cert. Pass your > > > > lab, get your number, call yourself a CCIE. Til then, you are a > > > > CCNP, CCDP. > > > > My two cents. > > > > > > > > CL: about the same time the CCNP 2.0 became a certification. Some > > people > > > > will do anything to make themselves look better > > > > > > > > Chuck > > > > primary school diploma, high school diploma, Universal Life > > > > Church minister > > > > Costco GoldStar Member, United Mileage Plus member, Calif. State > > > > AAA member > > > > should I join the NRA and look tough too? ;-> > > > > > > > > > > > > > > > > -Original Message- > > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > > > > ahmed adil > > > > Sent: Sunday, September 02, 2001 1:00 PM > > > > To: [EMAIL PROTECTED] > > > > Subject: Re: Can you pass CCNP w/o having Cisco gears? [7:18124] > > > > > > > > > > > > Just cant do it without a router > > > > > > > > Ahmed > > > > CCIE Written CCNP CCDP MCSE > > > > > > > > ""Dan Faulk"" wrote in message > > > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > > > Having recently just passed CCNP this year I will say you must have > > a > > > > > Router. > > > > > The reason is that the prescribed rituals must be performed in front > > of > > > > the > > > > > Router. > > > > > Without a Router the powerful spirit of routing, BGPOSPF, wont > > > > bless your > > > > > efforts and even if you do pass all knowledge will be removed from > > you > > > > > within 2 months. Some have said scrificing your most valuable > > possesion > > > > > before the router helps. I give it my time which seemed to work > > well. > > > > Others > > > > > have given the Router spirit money, bought it accessories, even food > > but > > > > so > > > > > far time works best. > > > > > Hope this helps and smile cause TGIF!! > > > > > > > > > > > > > > > -Original Message- > > > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf > > Of > > D > > > > > Rick > > > > > Sent: Friday, August 31, 2001 11:57 AM > > > > > To: [EMAIL PROTECTED] > > > > > Subject: Can you pass CCNP w/o having Cisco gears? [7:18107] > > > > > > > > > > > > > > > Can you pass CCNP w/o having Cisco gears? I'm doing practice test > > from > > > > > Boson and doing the Sybex study guide? Is that sufficient? Do > > > > I need to > > > > be > > > > > in front of a router? > > > > > > > > > > Thanks in advance, > > > > > Rick D Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18593&t=18124 -- FAQ, list archives, and
Re: code red [7:18558]
The only way to stop the traffic from arriving at your router is to have your ISP place an access list on their router to stop http traffic. You could place an access list on your router but the traffic would already have used your bandwidth by then. ""kaushalenders"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > hi, > how can i block the codered traffic in cisco 1750 .the solution given on > site is not working because the ios have no support for http protocol can > any body help me because it is chockeing my leaseline > thanxs > kaushalender Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18596&t=18558 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ospf + hsrp [7:18582]
Have you performed a search on Cisco's site? ""ltd venite"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi Guys, > > We are implementing a network using ospf and hsrp. Someone told us that > there are issues with these two, are you aware of any issues and if so > please share them with us. > > thanks > venite Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18592&t=18582 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: how to build a pix firewall out of a PC box. [7:18335]
Me too :) -Original Message- From: Lowe, Jason [mailto:[EMAIL PROTECTED]] Sent: 05 September 2001 15:24 To: [EMAIL PROTECTED] Subject: RE: how to build a pix firewall out of a PC box. [7:18335] I would also like A copy of these instructions. Thank you. -Original Message- From: Richard [mailto:[EMAIL PROTECTED]] Sent: Tuesday, September 04, 2001 10:55 PM To: [EMAIL PROTECTED] Subject: Re: how to build a pix firewall out of a PC box. [7:18335] Count me in... ""mike johnson"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi Everyone, > > For those who are interested in learning Cisco PIX but > do NOT want to spend a lot of money on buying an > expensive PIX Firewall, I think I can help you. I > have instructions on how to build a PIX firewall by > using a PC. In case you didn't know, PIX firewall is > essentially a PC with multiple interfaces. I've > successfully built several PIX firewall using my old > PCs (i.e. pentium 200 MHz processor). Actually, the > PIX1 series (obsolete I know) is a PC with Intel > EtherExpress Interface cards. However, you must have > an account with CCO in order the software and download > the software. The rest of the instructions on how to > build a PIX firewall using PC is very simple. Anyone > interested in learning it, let me know. > > Mike > > __ > Do You Yahoo!? > Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger > http://im.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18594&t=18335 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCIE seeking job @ Richmond VA or Metro D.C. [7:18502]
Is it that hard for CCIE's to find work in your area that you have to post here? ""kent"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > My apology for broadcasting this in this forum. > > I have 7 years experience in networking. > Please drop me an email if you have any information or suggestion. > > Thanks in advance > > Regards, > Kent Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18598&t=18502 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCIE Written books [7:18477]
Search the archives at groups.google.com... this question is asked all the time ""Shoaib Waqar"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Dear All, can anybody tell me the recommended books > for the preparation of CCIE written exam. Any idea and > thoughts will be appreciated. > > Shoaib > > __ > Do You Yahoo!? > Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger > http://im.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18600&t=18477 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Internet usage tool for home pc. [7:18439]
Check out MRTG... http://people.ee.ethz.ch/~oetiker/webtools/mrtg/ ""Rajesh Kumar"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi all, > > Just wanted to know, if there are any tool that I can use for monitoring > the Internet bandwidth while the connection is there. The option I have > is ATT Cablemodem and I need to know how much is the bandwidth at any > given time. > > Thanks > rajesh > > [GroupStudy.com removed an attachment of type text/x-vcard which had a name > of pikumar.vcf] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18601&t=18439 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: how to build a pix firewall out of a PC box. [7:18335]
Hi, I'm interested in the instructions for building a pix firewall. regards, John >From: "Debbie Westall" >Reply-To: "Debbie Westall" >To: [EMAIL PROTECTED] >Subject: RE: how to build a pix firewall out of a PC box. [7:18335] >Date: Wed, 5 Sep 2001 08:17:14 -0400 > >Mike, > >I would also be interested in the instructions for >building the PIX firewall from a PC > >Thank you in advance > >Debbie > >--- Tony Zhu wrote: > > Me too. > > > > Kind Regards, > > > > Tony Zhu > > > > -Original Message- > > From: VNithianandam [mailto:[EMAIL PROTECTED]] > > Sent: Wednesday, 5 September 2001 2:23 AM > > To: [EMAIL PROTECTED] > > Subject: RE: how to build a pix firewall out of a PC > > box. [7:18335] > > > > > > I would be interested in building a PIX firewall. > > > > Vini > > > > -Original Message- > > From: Patrick Ramsey > > [mailto:[EMAIL PROTECTED]] > > Sent: Tuesday, September 04, 2001 11:44 AM > > To: [EMAIL PROTECTED] > > Subject: RE: how to build a pix firewall out of a PC > > box. [7:18335] > > > > > > I would also be interested. Who was the original > > poster of this message? > > > > -Patrick > > > > >>> "Raul F. Fernandez" 09/03/01 06:52PM >>> > > Mike, > > > > I am most definitely interested. PLease e-mail me > > the process if possible > > for building a PIX firewall. > > > > Thank you in advance, > > > > Raul > > > > -Original Message- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]]On Behalf Of > > mike johnson > > Sent: Monday, September 03, 2001 4:59 PM > > To: [EMAIL PROTECTED] > > Subject: how to build a pix firewall out of a PC > > box. [7:18335] > > > > > > Hi Everyone, > > > > For those who are interested in learning Cisco PIX > > but > > do NOT want to spend a lot of money on buying an > > expensive PIX Firewall, I think I can help you. I > > have instructions on how to build a PIX firewall by > > using a PC. In case you didn't know, PIX firewall > > is > > essentially a PC with multiple interfaces. I've > > successfully built several PIX firewall using my old > > PCs (i.e. pentium 200 MHz processor). Actually, the > > PIX1 series (obsolete I know) is a PC with Intel > > EtherExpress Interface cards. However, you must > > have > > an account with CCO in order the software and > > download > > the software. The rest of the instructions on how > > to > > build a PIX firewall using PC is very simple. > > Anyone > > interested in learning it, let me know. > > > > Mike > > > > __ > > Do You Yahoo!? > > Get email alerts & NEW webcam video instant > > messaging with Yahoo! Messenger > > http://im.yahoo.com >[EMAIL PROTECTED] > > >__ >Do You Yahoo!? >Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger >http://im.yahoo.com _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18602&t=18335 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: how to build a pix firewall out of a PC box. [7:18335]
count me in too.. -Original Message- From: Samuel Tan Wei Sin [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 05, 2001 2:21 AM To: [EMAIL PROTECTED] Subject: RE: how to build a pix firewall out of a PC box. [7:18335] count me in too.. -Original Message- From: Tonton Rabena [mailto:[EMAIL PROTECTED]] Sent: Tuesday, September 04, 2001 9:25 PM To: [EMAIL PROTECTED] Subject: Re: how to build a pix firewall out of a PC box. [7:18335] count me too.. ""Richard"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Count me in... > > > ""mike johnson"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hi Everyone, > > > > For those who are interested in learning Cisco PIX but > > do NOT want to spend a lot of money on buying an > > expensive PIX Firewall, I think I can help you. I > > have instructions on how to build a PIX firewall by > > using a PC. In case you didn't know, PIX firewall is > > essentially a PC with multiple interfaces. I've > > successfully built several PIX firewall using my old > > PCs (i.e. pentium 200 MHz processor). Actually, the > > PIX1 series (obsolete I know) is a PC with Intel > > EtherExpress Interface cards. However, you must have > > an account with CCO in order the software and download > > the software. The rest of the instructions on how to > > build a PIX firewall using PC is very simple. Anyone > > interested in learning it, let me know. > > > > Mike > > > > __ > > Do You Yahoo!? > > Get email alerts & NEW webcam video instant messaging with Yahoo! > Messenger > > http://im.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18603&t=18335 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: IP unnumbered [7:18250]
The Loopback Interface is useful in OSPF, BGP, for network management. If a loopback will have 2-3 uses anyway, why not throw in ip unnumbered. If someone is dead set against loopback, you could use interface serial 0/0 ip unnumbered interface ethernet 0/0 ip address 10.1.1.1 255.255.255.0 no keepalive The Ethernet interface would always be up!! ^-^-^-^-^-^-^-^-^-^-^ Bill Carter CCIE 5022 ^-^-^-^-^-^-^-^-^-^-^ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Michael L. Williams Sent: Tuesday, September 04, 2001 5:49 PM To: [EMAIL PROTECTED] Subject: Re: IP unnumbered [7:18250] Dave, I agree totally with your statement, however, I don't understand why you say that if you use ip unnumbered pointing to a LoopBack interface that nullifies the point of using unnumbered (to save IPs). You can still use a single IP address on a LoopBack not waste more by putting separate IPs on each p-t-p link.. Mike W. "MADMAN" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Brett gives a good example that will work just fine but I would not > recommend using IP unnumbered. With RFC 1918 you have more IP addesses > than your going to need so no problems with using registered addresses > on p-to-p links. troubleshooting also becomes trickier but if you > insist on using them then use a loopback interface, but then a primary > argument is shot, burning IP addreses. > > Dave > > Brett Hairbottle wrote: > > > > Hi > > > > Instead of using a "numbered link" you can use ip unnumbered to connect > > sites. > > Example: > > > > Router A: > > interface fastethernet 0 > > ip address 10.100.2.1 255.255.255.0 > > interface serial 0 > > ip unnumbered fasthethernet 0 > > > > Router B: > > interface fastethernet 0 > > ip address 10.100.31 255.255.255.0 > > interface serial 0 > > ip unnumbered fasthethernet 0 > > > > now instead of assigning a ip address to each serial port you can use the > ip > > unnumbered command > > > > Brett Hairbottle > > Network Administrator > > CCNA > > - Original Message - > > From: "sami natour" > > To: > > Sent: Sunday, September 02, 2001 10:33 PM > > Subject: IP unnumbered [7:18250] > > > > > Hello everybody, > > > I know how to cinfigure IP unumbered but I do not know > > > any practical scenario that I make use of this > > > feature.Any body has specific scanrios where I can > > > use ip unnumbered . > > > > > > Regards , > > > sami > > > > > > > > > __ > > > Do You Yahoo!? > > > Get email alerts & NEW webcam video instant messaging with Yahoo! > > Messenger > > > http://im.yahoo.com > -- > David Madland > Sr. Network Engineer > CCIE# 2016 > Qwest Communications Int. Inc. > [EMAIL PROTECTED] > 612-664-3367 > > "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18604&t=18250 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: how to build a pix firewall out of a PC box. [7:18335]
OKAY ENOUGH "ME TOO" WHAT ABOUT THE "HOW TO"..? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 05, 2001 9:53 AM To: [EMAIL PROTECTED] Subject: RE: how to build a pix firewall out of a PC box. [7:18335] I would be interested, too. thnks. > -Original Message- > From: A. Dominick Marino [mailto:[EMAIL PROTECTED]] > Sent: 05 septembrie 2001 15:00 > To: [EMAIL PROTECTED] > Subject: Re: how to build a pix firewall out of a PC box. [7:18335] > > > I would be very interested to leartn how to do this. > > > Dominick Marino > [EMAIL PROTECTED] > > ""mike johnson"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hi Everyone, > > > > For those who are interested in learning Cisco PIX but > > do NOT want to spend a lot of money on buying an > > expensive PIX Firewall, I think I can help you. I > > have instructions on how to build a PIX firewall by > > using a PC. In case you didn't know, PIX firewall is > > essentially a PC with multiple interfaces. I've > > successfully built several PIX firewall using my old > > PCs (i.e. pentium 200 MHz processor). Actually, the > > PIX1 series (obsolete I know) is a PC with Intel > > EtherExpress Interface cards. However, you must have > > an account with CCO in order the software and download > > the software. The rest of the instructions on how to > > build a PIX firewall using PC is very simple. Anyone > > interested in learning it, let me know. > > > > Mike > > > > __ > > Do You Yahoo!? > > Get email alerts & NEW webcam video instant messaging with Yahoo! > Messenger > > http://im.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18607&t=18335 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: does vtp can span the router [7:18545]
I believe it means that the router will not listen to the vtp messages. It will also not pass them along- it is strictly layer 2. pass them along,you mean just transfer it ,right?but i don't know where it go,see my last message,i dont know which vlan can carry vtp,or like cdp-a purely layer 2 protocol, does vtp indepent of vlan,it runs on native vlan?? i dont find ways to prove it. anyway ,thanks a lot Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18606&t=18545 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: how to build a pix firewall out of a PC box. [7:18335]
Could you send me the instruction as well. Thanks in advance - Original Message - From: "Murphy, Brian J SITI-ISET-31" To: Sent: Wednesday, September 05, 2001 9:51 AM Subject: RE: how to build a pix firewall out of a PC box. [7:18335] > Me too :) > > -Original Message- > From: Lowe, Jason [mailto:[EMAIL PROTECTED]] > Sent: 05 September 2001 15:24 > To: [EMAIL PROTECTED] > Subject: RE: how to build a pix firewall out of a PC box. [7:18335] > > I would also like A copy of these instructions. Thank you. > > -Original Message- > From: Richard [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, September 04, 2001 10:55 PM > To: [EMAIL PROTECTED] > Subject: Re: how to build a pix firewall out of a PC box. [7:18335] > > > Count me in... > > > ""mike johnson"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hi Everyone, > > > > For those who are interested in learning Cisco PIX but > > do NOT want to spend a lot of money on buying an > > expensive PIX Firewall, I think I can help you. I > > have instructions on how to build a PIX firewall by > > using a PC. In case you didn't know, PIX firewall is > > essentially a PC with multiple interfaces. I've > > successfully built several PIX firewall using my old > > PCs (i.e. pentium 200 MHz processor). Actually, the > > PIX1 series (obsolete I know) is a PC with Intel > > EtherExpress Interface cards. However, you must have > > an account with CCO in order the software and download > > the software. The rest of the instructions on how to > > build a PIX firewall using PC is very simple. Anyone > > interested in learning it, let me know. > > > > Mike > > > > __ > > Do You Yahoo!? > > Get email alerts & NEW webcam video instant messaging with Yahoo! > Messenger > > http://im.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18605&t=18335 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: what is the native vlan function in trunk? [7:18543]
" you can see this could cause some serious problems if different VLANs are configured as the native VLAN at each end of the trunk." i still can not imaging what type of problem will occur,can you show me some examples? now i have enough switch to prove it ,this problem has confused me for days. thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18608&t=18543 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
THE KEY: regarding cisco and SecureCRT software---> [7:18486]
Actually, this is an encoded license key. To properly interpret the key you must first remove all of the numbers, leaving all of the letters. Hopefully, this will clear some things up! Regards, John >>> "Brian Whalen" 9/4/01 11:23:55 PM >>> Ditto, it is shareware, you get a 30 day eval for free, after that yer sposed to pay em if u keep using it.. Brian "Sonic" Whalen Success = Preparation + Opportunity On Tue, 4 Sep 2001, Eric Rivard wrote: > Isn't this program a licensed program that you NEED to purchase to use? > Are we all into piracy? Also the software has strict rules about being > exported across seas, before we give out serial numbers we should see if > we are breaking any licensing policies. > > -Original Message- > From: John Neiberger > Sent: Tue 9/4/2001 2:43 PM > To: [EMAIL PROTECTED] > Cc: > Subject: Re: regarding cisco and SecureCRT software---> > [7:18486] > > > > Sure, no problem. Here they are: > > Serial No: 09-02-191523 > > Key: K5I6 S2S3 M6Y5 B3I2 G1F2 A8T5 B9U3 T5T2 > > good luck, hope that helps. > > John > > >>> "[EMAIL PROTECTED]" 9/4/01 3:13:22 PM >>> > Hey there: > > Does anyone have the Serial number and license key for the > SecureCRT > ...I > can't seem to enable mine utilizing the keys. I'm assuming > these are > all > the > same, if anyone out there has the keys or wants to upload me a > direct > copy I > would greatly appreciate it...for some reason hyperterminal > doesn't > work > well > with cisco routers. > > thankx > [EMAIL PROTECTED] > > [GroupStudy.com removed an attachment of type application/ms-tnef which had > a name of winmail.dat] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18609&t=18486 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: how to build a pix firewall out of a PC box. [7:18335]
I am also very interested please add me to the list . Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18610&t=18335 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: how to build a pix firewall out of a PC box. [7:18335]
Please add me to the list too Ola - Original Message - From: "John Kale" To: Sent: Wednesday, September 05, 2001 9:05 AM Subject: RE: how to build a pix firewall out of a PC box. [7:18335] > Hi, > > I'm interested in the instructions for building a pix firewall. > > regards, > > John > > > >From: "Debbie Westall" > >Reply-To: "Debbie Westall" > >To: [EMAIL PROTECTED] > >Subject: RE: how to build a pix firewall out of a PC box. [7:18335] > >Date: Wed, 5 Sep 2001 08:17:14 -0400 > > > >Mike, > > > >I would also be interested in the instructions for > >building the PIX firewall from a PC > > > >Thank you in advance > > > >Debbie > > > >--- Tony Zhu wrote: > > > Me too. > > > > > > Kind Regards, > > > > > > Tony Zhu > > > > > > -Original Message- > > > From: VNithianandam [mailto:[EMAIL PROTECTED]] > > > Sent: Wednesday, 5 September 2001 2:23 AM > > > To: [EMAIL PROTECTED] > > > Subject: RE: how to build a pix firewall out of a PC > > > box. [7:18335] > > > > > > > > > I would be interested in building a PIX firewall. > > > > > > Vini > > > > > > -Original Message- > > > From: Patrick Ramsey > > > [mailto:[EMAIL PROTECTED]] > > > Sent: Tuesday, September 04, 2001 11:44 AM > > > To: [EMAIL PROTECTED] > > > Subject: RE: how to build a pix firewall out of a PC > > > box. [7:18335] > > > > > > > > > I would also be interested. Who was the original > > > poster of this message? > > > > > > -Patrick > > > > > > >>> "Raul F. Fernandez" 09/03/01 06:52PM >>> > > > Mike, > > > > > > I am most definitely interested. PLease e-mail me > > > the process if possible > > > for building a PIX firewall. > > > > > > Thank you in advance, > > > > > > Raul > > > > > > -Original Message- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED]]On Behalf Of > > > mike johnson > > > Sent: Monday, September 03, 2001 4:59 PM > > > To: [EMAIL PROTECTED] > > > Subject: how to build a pix firewall out of a PC > > > box. [7:18335] > > > > > > > > > Hi Everyone, > > > > > > For those who are interested in learning Cisco PIX > > > but > > > do NOT want to spend a lot of money on buying an > > > expensive PIX Firewall, I think I can help you. I > > > have instructions on how to build a PIX firewall by > > > using a PC. In case you didn't know, PIX firewall > > > is > > > essentially a PC with multiple interfaces. I've > > > successfully built several PIX firewall using my old > > > PCs (i.e. pentium 200 MHz processor). Actually, the > > > PIX1 series (obsolete I know) is a PC with Intel > > > EtherExpress Interface cards. However, you must > > > have > > > an account with CCO in order the software and > > > download > > > the software. The rest of the instructions on how > > > to > > > build a PIX firewall using PC is very simple. > > > Anyone > > > interested in learning it, let me know. > > > > > > Mike > > > > > > __ > > > Do You Yahoo!? > > > Get email alerts & NEW webcam video instant > > > messaging with Yahoo! Messenger > > > http://im.yahoo.com > >[EMAIL PROTECTED] > > > > > >__ > >Do You Yahoo!? > >Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger > >http://im.yahoo.com > _ > Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18611&t=18335 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: RE: how to build a pix firewall out of a PC box. [7:18335]
I personally would be very surprised if this was in fact possible without requiring some serious hardware hacking. It's curious that the original poster of this message was extremely vague in the details and it makes you wonder whether or not it was just an attempt to create a few hundred "Me too!" messages, which seems to have worked nicely. Will everyone -please- stop replying "Me too!" and just ask that the person post the details to the group if in fact it really is possible, which I doubt seriously. James Willard [EMAIL PROTECTED] - Original Message - From: "anyong" To: Sent: Wednesday, September 05, 2001 3:23 AM Subject: Re: RE: how to build a pix firewall out of a PC box. [7:18335] > Very interesting post : D > > I've all the listed part apart from the flash card that need advice. > > Is these flash card just a ISA adaptor (converter) and insert a 16MB PCMCIA > flash card or there are some flash chips build on the ISA board? If not, > what's the brand name? The Cisco brand cost 7xx! > > Thanks > > anyong > > > ""udo konstantin"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Woww, > > > > please count me in to > > > > Thanks > > > > Udo > > > > "Vishal Punjabi" schrieb am 05.09.01: > > > Me too > > > Vishal > > > -Original Message- > > > From: samuel [mailto:[EMAIL PROTECTED]] > > > Sent: Wednesday, September 05, 2001 1:07 PM > > > To: [EMAIL PROTECTED] > > > Subject: RE: how to build a pix firewall out of a PC box. [7:18335] > > > > > > > > > Me to > > > > > > Samuel ho > > > > > > > > > -Original Message- > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of > > > Tonton Rabena > > > Sent: Wednesday, September 05, 2001 12:25 PM > > > To: [EMAIL PROTECTED] > > > Subject: Re: how to build a pix firewall out of a PC box. [7:18335] > > > > > > count me too.. > > > > > > ""Richard"" wrote in message > > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > > Count me in... > > > > > > > > > > > > ""mike johnson"" wrote in message > > > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > > > Hi Everyone, > > > > > > > > > > For those who are interested in learning Cisco PIX but > > > > > do NOT want to spend a lot of money on buying an > > > > > expensive PIX Firewall, I think I can help you. I > > > > > have instructions on how to build a PIX firewall by > > > > > using a PC. In case you didn't know, PIX firewall is > > > > > essentially a PC with multiple interfaces. I've > > > > > successfully built several PIX firewall using my old > > > > > PCs (i.e. pentium 200 MHz processor). Actually, the > > > > > PIX1 series (obsolete I know) is a PC with Intel > > > > > EtherExpress Interface cards. However, you must have > > > > > an account with CCO in order the software and download > > > > > the software. The rest of the instructions on how to > > > > > build a PIX firewall using PC is very simple. Anyone > > > > > interested in learning it, let me know. > > > > > > > > > > Mike > > > > > > > > > > __ > > > > > Do You Yahoo!? > > > > > Get email alerts & NEW webcam video instant messaging with Yahoo! > > > > Messenger > > > > > http://im.yahoo.com > > > _ > > > Do You Yahoo!? > > > Get your free @yahoo.com address at http://mail.yahoo.com > > > > __ > > Flug.de - 570.000 Nutzer, ein Ziel: der optimale Flug > > http://flug.de/sb/?PP=0-5-100-105-12 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18612&t=18335 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCNP and CCDP logo [7:18613]
Hi Guys yesterday got report from Cisco that I passed my BSCI beta exam. This completes my long journey spanned over 1.5 year to the road of CCNP and CCDP. It took such a long time becuase i was busy with my MS, short of money and resources blah blah blah. But I am pleased atleast now I am done with it. Onto CCIE Written and JNCIS. I just want to flood my resume as my contract is expiring and my CCNP and CCDP logos are still not available at Galton. Can any one of u share these logos with me? Ill highly appreciate that. Regards = Shahid Muhammad Shafi Network Engineer Level(3) Communications MCSE+I/MCSE(Win2K),CNA,CCNP,CCDP Please help feed hungry people worldwide http://www.hungersite.com/ A small thing each of us can do to help others less fortunate than ourselves __ Do You Yahoo!? Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger http://im.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18613&t=18613 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: how to build a pix firewall out of a PC box. [7:18335]
I would be greatfull if you could sent it to me to Thanks, Shassim - Original Message - From: "jin Hotmail" To: Sent: Wednesday, September 05, 2001 10:19 AM Subject: Re: how to build a pix firewall out of a PC box. [7:18335] > Could you send me the instruction as well. > Thanks in advance > - Original Message - > From: "Murphy, Brian J SITI-ISET-31" > To: > Sent: Wednesday, September 05, 2001 9:51 AM > Subject: RE: how to build a pix firewall out of a PC box. [7:18335] > > > > Me too :) > > > > -Original Message- > > From: Lowe, Jason [mailto:[EMAIL PROTECTED]] > > Sent: 05 September 2001 15:24 > > To: [EMAIL PROTECTED] > > Subject: RE: how to build a pix firewall out of a PC box. [7:18335] > > > > I would also like A copy of these instructions. Thank you. > > > > -Original Message- > > From: Richard [mailto:[EMAIL PROTECTED]] > > Sent: Tuesday, September 04, 2001 10:55 PM > > To: [EMAIL PROTECTED] > > Subject: Re: how to build a pix firewall out of a PC box. [7:18335] > > > > > > Count me in... > > > > > > ""mike johnson"" wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > Hi Everyone, > > > > > > For those who are interested in learning Cisco PIX but > > > do NOT want to spend a lot of money on buying an > > > expensive PIX Firewall, I think I can help you. I > > > have instructions on how to build a PIX firewall by > > > using a PC. In case you didn't know, PIX firewall is > > > essentially a PC with multiple interfaces. I've > > > successfully built several PIX firewall using my old > > > PCs (i.e. pentium 200 MHz processor). Actually, the > > > PIX1 series (obsolete I know) is a PC with Intel > > > EtherExpress Interface cards. However, you must have > > > an account with CCO in order the software and download > > > the software. The rest of the instructions on how to > > > build a PIX firewall using PC is very simple. Anyone > > > interested in learning it, let me know. > > > > > > Mike > > > > > > __ > > > Do You Yahoo!? > > > Get email alerts & NEW webcam video instant messaging with Yahoo! > > Messenger > > > http://im.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18614&t=18335 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: how to build a pix firewall out of a PC box. [7:18335]
OK, I have been getting 256 emails for the past few days regarding how to build a PIX out of an old PC. Now for thos, who have all the spare parts, you just have to wait a tad longer until everyone in the group get their parts so that we can build the PIX together at once. Regarding the flash card, this is rather an old technology before the PCMCIA card the old machine use to store program instead of the hard-drive or other means. The flash card I am talking about is the one that looks like an old ISA video card that gets inserted into the ISA slot on the motherboard. Because PIX doesn't use hard-drive, this flash card is where the PIX IOS code resides. I don't know where to purchase it. I got this card from a friend of mine. Another thing, as I've mentioned before, the NICs have to be Intel Etherexpress model 82577 (one of those weird shape looking card) or the PIX will not work. Now these cards you can get on Ebay very cheaply. Regards, Mike Johnson [CCNP Security Specialist] >From: "Paul Jin" >Reply-To: "Paul Jin" >To: [EMAIL PROTECTED] >Subject: RE: how to build a pix firewall out of a PC box. [7:18335] >Date: Mon, 3 Sep 2001 18:06:45 -0400 > >Hey Mike, > >I am definitely interested. > >I am assuming than we can do this with almost any spare misconduct and Nondisclosure violations to [EMAIL PROTECTED] Get your FREE download of MSN Explorer at http://explorer.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18615&t=18335 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Can you pass CCNP w/o having Cisco gears? [7:18124]
Good question. I'm still trying to find out why. Perhaps I'm just sick & tired of my colleagues looking down upon my capabilities (being a female in this industry tends to be belittled by others, you see, esp in my part of the world.) Even the examination centers officers are puzzled to see me taking Cisco exams, when they would expect only guys to do such things. I'm being treated like a female clerk at the system integrator firm where I worked, being excluded out of all technical discussions because the guys just think "gee what do YOU know about this router/switch/firewall thing??" (For your reference, I've got a degree in Electrical Engineering, degree in Commerce, MCSE, etc etc). Is sexual discrimation prevalent everywhere in this IT industry, or just at my place? Guess I took my CCNP simply out of pride, just to show that "whatever you guys can do, I can do too." And perhaps, out of pride too, I will take my CCIE. Regards, Eve - Original Message - From: Jeroen Timmer To: 'jap_e' Sent: Tuesday, September 04, 2001 4:34 PM Subject: RE: Can you pass CCNP w/o having Cisco gears? [7:18124] Why even bother to be CCNP or CCIE when you never touch a router ?!?! It's not my concern what you do, or don't, but it just looked funny to me. Gaining CCNP without playing around with routers and stuff ? Why you wanna become CCNP ? grtz, JT -Original Message- From: jap_e [mailto:[EMAIL PROTECTED]] Sent: Monday, September 03, 2001 2:47 PM To: [EMAIL PROTECTED] Subject: Re: Can you pass CCNP w/o having Cisco gears? [7:18124] The answer is Yes, you can be a paper CCNP. I just turned CCNP last week and I have never touched a router before. Have never logged into a router, not used any router simulator software. (Yes I know how a router looked like from the pictures I've seen.) Neither did i cheat by using brain dumps. All the information for passing the exams only came from the 4 Sybex books (routing, switching, support, RA) Not trying to be proud here, but a paper CCNP is possible. Will take my written CCIE soon. As for the lab exam, hmm... we shall see... Cheers, Eve - Original Message - From: Christopher Supino To: [EMAIL PROTECTED] Sent: Monday, September 03, 2001 6:02 AM Subject: RE: Can you pass CCNP w/o having Cisco gears? [7:18124] Consider them rolled. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of B.J. Wilson Sent: Sunday, September 02, 2001 5:18 PM To: [EMAIL PROTECTED] Subject: Re: Can you pass CCNP w/o having Cisco gears? [7:18124] I heard that cert was still in Draft stage. (insert collective eye-roll here.) - Original Message - From: "Christopher Supino" To: Sent: Sunday, September 02, 2001 4:06 PM Subject: RE: Can you pass CCNP w/o having Cisco gears? [7:18124] > Nice Chuck. Don't forget to add CFTA(Certified Flush Toilet Administrator), > and MCBD(Miller Certified Beer Drinker). > > :) > > Chris > > -Original Message- > From: Chuck Larrieu [mailto:[EMAIL PROTECTED]] > Sent: Sunday, September 02, 2001 3:22 PM > To: Christopher Supino; [EMAIL PROTECTED] > Subject: RE: Can you pass CCNP w/o having Cisco gears? [7:18124] > > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Christopher Supino > Sent: Sunday, September 02, 2001 12:18 PM > To: [EMAIL PROTECTED] > Subject: RE: Can you pass CCNP w/o having Cisco gears? [7:18124] > > When did CCIE Written become a certification? I take serious issue with > engineers who do this. It only adds to the cheapening of the cert. Pass your > lab, get your number, call yourself a CCIE. Til then, you are a CCNP, CCDP. > My two cents. > > CL: about the same time the CCNP 2.0 became a certification. Some people > will do anything to make themselves look better > > Chuck > primary school diploma, high school diploma, Universal Life Church minister > Costco GoldStar Member, United Mileage Plus member, Calif. State AAA member > should I join the NRA and look tough too? ;-> > > > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > ahmed adil > Sent: Sunday, September 02, 2001 1:00 PM > To: [EMAIL PROTECTED] > Subject: Re: Can you pass CCNP w/o having Cisco gears? [7:18124] > > > Just cant do it without a router > > Ahmed > CCIE Written CCNP CCDP MCSE > > ""Dan Faulk"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Having recently just passed CCNP this year I will say you must have a > > Router. > > The reason is that the prescribed rituals must be performed in front of > the > > Router.
Re: FECN/BECN below a CIR [7:18444]
Don't forget as well that the time over which the CIR usage is calculated (I've forgotten the formal term and don't feel like searching for it right now) is generally of the order of a second (at least in this part of the world), while the load reported by the router is generally averaged over five minutes. If you have bursty traffic (routing updates, for example), you may be going above CIR for some periods, even though your five-minute average may be well under CIR. More relevant for DE rather than FECN/BECN, but something to keep in mind. JMcL - Forwarded by Jenny Mcleod/NSO/CSDA on 05/09/2001 09:48 am - "Karen E Young" To: [EMAIL PROTECTED] Subject: Re: FECN/BECN below a CIR [7:18444] Sent by: nobody@groups tudy.com 05/09/2001 05:42 am Please respond to "Karen E Young" If you're getting FECN/BECN traffic then its experiencing congestion. Congestion on the FR network prior to CIR being met is indeed a good sign of oversubscription. If its only occasional then it may simply have been a spike on the switch. However, if you're getting it fairly regularly, then you need to talk to your provider. There's NO reason to set FECN/BECN when there isn't congestion. Ask them how they determine subscription load. Some providers (such as Sprint last I heard) use the CIR to determine load on a switch, not the actual traffic. If they have alot of customers with 0 CIR then the switch can easily get oversubscribed to the point that the provider can no longer meet the CIR of their customers. HTH, Karen *** REPLY SEPARATOR *** On 9/4/2001 at 2:19 PM Paul Borghese wrote: >Does anyone know if a Frame Relay provider will send FECN/BECN messages even >if the CIR is not oversubscribed? > >Is looking at the FECN/BECN traffic a good determination of CIR >oversubscription? > >Paul Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18526&t=18444 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: cat5500 [7:18498]
Search ebay... they usually go for around $10 each ""Michelle Sanderson"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Does anyone have about 7 slot covers for a catalyst 5500 that you don't > need? This may be off topic, but I can't find them anywhere. Thank you > > > - > Do You Yahoo!? > Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18599&t=18498 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ospf + hsrp [7:18582]
I have done it and it worked fine. To say there is no bugs in any IOS when doing OSPF and HSRP would be naive though so you may want to do a quick bug search. Dave ltd venite wrote: > > Hi Guys, > > We are implementing a network using ospf and hsrp. Someone told us that > there are issues with these two, are you aware of any issues and if so > please share them with us. > > thanks > venite -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18616&t=18582 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: how to build a pix firewall out of a PC box. [7:18335]
Could u post it so that everybody can have a look > > -Original Message- > > From: Lowe, Jason [mailto:[EMAIL PROTECTED]] > > Sent: 05 September 2001 15:24 > > To: [EMAIL PROTECTED] > > Subject: RE: how to build a pix firewall out of a > PC box. [7:18335] > > > > I would also like A copy of these instructions. > Thank you. > > > > -Original Message- > > From: Richard [mailto:[EMAIL PROTECTED]] > > Sent: Tuesday, September 04, 2001 10:55 PM > > To: [EMAIL PROTECTED] > > Subject: Re: how to build a pix firewall out of a > PC box. [7:18335] > > > > > > Count me in... > > > > > > ""mike johnson"" wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > Hi Everyone, > > > > > > For those who are interested in learning Cisco > PIX but > > > do NOT want to spend a lot of money on buying an > > > expensive PIX Firewall, I think I can help you. > I > > > have instructions on how to build a PIX firewall > by > > > using a PC. In case you didn't know, PIX > firewall is > > > essentially a PC with multiple interfaces. I've > > > successfully built several PIX firewall using my > old > > > PCs (i.e. pentium 200 MHz processor). Actually, > the > > > PIX1 series (obsolete I know) is a PC with > Intel > > > EtherExpress Interface cards. However, you must > have > > > an account with CCO in order the software and > download > > > the software. The rest of the instructions on > how to > > > build a PIX firewall using PC is very simple. > Anyone > > > interested in learning it, let me know. > > > > > > Mike > > > > > > > __ > > > Do You Yahoo!? > > > Get email alerts & NEW webcam video instant > messaging with Yahoo! > > Messenger > > > http://im.yahoo.com [EMAIL PROTECTED] = Rajeev Karamchand MCSE,MCSE+I,MCDBA,CCNA __ Do You Yahoo!? Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger http://im.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18618&t=18335 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: 2620 + NM-4T= WAS RE: Regarding cisco routers [7:18368]
The 3600 certainly does support the WIC-2T. Dave , Makarand Yerawadekar wrote: > > Cisco 2600 series does not support NM-4T, incidentally Cisco 3600 series > can not accept WIC-2 > > At 11:17 AM 9/4/01 -0400, Daniel Cotts wrote: > >I don't believe that the NM-4T= four port serial module will work in any > >2600 series router. Folks here on the list have mentioned using two WIC-2T= > >with 2600s. Keep in mind that those modules require the SmartSerial cables. > > > > > -Original Message- > > > From: Ahmed Mamoor Amimi [mailto:[EMAIL PROTECTED]] > > > Sent: Tuesday, September 04, 2001 12:47 AM > > > To: [EMAIL PROTECTED] > > > Subject: Re: Regarding cisco routers [7:18368] > > > > > > > > > 2509 was of worth for the old CCIE lab where u need it > > > but now this > > > router is been replaced with > > > a KNOB SWITCH to get in to each router ... like the printer > > > switch box used > > > to swtich printer b/w PC. > > > and for the CCNA/CCNP u really dont need to have it.. > > > this router is > > > good but also expensive... why waste > > > money on that u dont want in the lab, the only benefit left > > > with this router > > > is eight ASYNC ports used for DDR > > > and stuff... but this u can do it from every router that have > > > an AUX port as > > > AUX is an ASYNC port too. > > > I think u should have a router with have atleast 4 serial > > > ports so u can > > > make that router a frame-relay switch. > > > and in my opinoin u should buy a 2620 with 4 port serial > > > module... by this u > > > can have that router act as a > > > frame-relay switch as it will have 4 serial and also can be used for > > > inter-vlan routing b/w ur switches > > > That will be a complete lab for CCIE level except token-ring > > > switching and > > > ATM. > > > > > > enjoy > > > -Mamoor > > > CCNP/CNE/MCT/MCSE/A+/NETWORK+/CCIE(writen) > > > > > > > > > wrote in message > > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > > I am considering purchasing a 2509 router because I need to > > > telnet into my > > > > other four without beating up on my PC serial ports. I > > > currently own 4 > > > > routers TWO 2501, ONE 2503, One 2514, also an isdn 804, > > > catalyst 5000 and > > > > 1900EN switch. I was told the 2509 would be a perfect > > > addition since I > > > > would > > > > be able to log in utiilizing one console port on my PC to > > > eight on the > > > 2509 > > > > router. Are there any other good uses of the 2509 other > > > then consoling > > > > in...for instancedo I need to have it for my CCNA or > > > CCNP?? also > > > should > > > > I drop any of the other routers or do you think I should > > > keep them...again > > > > these routers are for studying only. > > > > > > > > P.s. I forgot to mention I also have a isdn simulator...sorry for > > > > boasting..but I do need expert advice here and don't want > > > to burn money on > > > > things I don't need. > > > > > > > > thank you > > > Report misconduct > > > and Nondisclosure violations to [EMAIL PROTECTED] -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18619&t=18368 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Fw: how to build a pix firewall out of a PC box. [7:18335]
please don't add me to the list... - Original Message - From: "Shassim Mohammed" To: Sent: Wednesday, September 05, 2001 3:44 PM Subject: Re: how to build a pix firewall out of a PC box. [7:18335] > I would be greatfull if you could sent it to me to > > Thanks, > > Shassim > > > - Original Message - > From: "jin Hotmail" > To: > Sent: Wednesday, September 05, 2001 10:19 AM > Subject: Re: how to build a pix firewall out of a PC box. [7:18335] > > > > Could you send me the instruction as well. > > Thanks in advance > > - Original Message - > > From: "Murphy, Brian J SITI-ISET-31" > > To: > > Sent: Wednesday, September 05, 2001 9:51 AM > > Subject: RE: how to build a pix firewall out of a PC box. [7:18335] > > > > > > > Me too :) > > > > > > -Original Message- > > > From: Lowe, Jason [mailto:[EMAIL PROTECTED]] > > > Sent: 05 September 2001 15:24 > > > To: [EMAIL PROTECTED] > > > Subject: RE: how to build a pix firewall out of a PC box. [7:18335] > > > > > > I would also like A copy of these instructions. Thank you. > > > > > > -Original Message- > > > From: Richard [mailto:[EMAIL PROTECTED]] > > > Sent: Tuesday, September 04, 2001 10:55 PM > > > To: [EMAIL PROTECTED] > > > Subject: Re: how to build a pix firewall out of a PC box. [7:18335] > > > > > > > > > Count me in... > > > > > > > > > ""mike johnson"" wrote in message > > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > > Hi Everyone, > > > > > > > > For those who are interested in learning Cisco PIX but > > > > do NOT want to spend a lot of money on buying an > > > > expensive PIX Firewall, I think I can help you. I > > > > have instructions on how to build a PIX firewall by > > > > using a PC. In case you didn't know, PIX firewall is > > > > essentially a PC with multiple interfaces. I've > > > > successfully built several PIX firewall using my old > > > > PCs (i.e. pentium 200 MHz processor). Actually, the > > > > PIX1 series (obsolete I know) is a PC with Intel > > > > EtherExpress Interface cards. However, you must have > > > > an account with CCO in order the software and download > > > > the software. The rest of the instructions on how to > > > > build a PIX firewall using PC is very simple. Anyone > > > > interested in learning it, let me know. > > > > > > > > Mike > > > > > > > > __ > > > > Do You Yahoo!? > > > > Get email alerts & NEW webcam video instant messaging with Yahoo! > > > Messenger > > > > http://im.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18620&t=18335 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: how to build a pix firewall out of a PC box. [7:18335]
I'm in -Original Message- From: jin Hotmail [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 05, 2001 10:19 AM To: [EMAIL PROTECTED] Subject: Re: how to build a pix firewall out of a PC box. [7:18335] Could you send me the instruction as well. Thanks in advance - Original Message - From: "Murphy, Brian J SITI-ISET-31" To: Sent: Wednesday, September 05, 2001 9:51 AM Subject: RE: how to build a pix firewall out of a PC box. [7:18335] > Me too :) > > -Original Message- > From: Lowe, Jason [mailto:[EMAIL PROTECTED]] > Sent: 05 September 2001 15:24 > To: [EMAIL PROTECTED] > Subject: RE: how to build a pix firewall out of a PC box. [7:18335] > > I would also like A copy of these instructions. Thank you. > > -Original Message- > From: Richard [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, September 04, 2001 10:55 PM > To: [EMAIL PROTECTED] > Subject: Re: how to build a pix firewall out of a PC box. [7:18335] > > > Count me in... > > > ""mike johnson"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hi Everyone, > > > > For those who are interested in learning Cisco PIX but > > do NOT want to spend a lot of money on buying an > > expensive PIX Firewall, I think I can help you. I > > have instructions on how to build a PIX firewall by > > using a PC. In case you didn't know, PIX firewall is > > essentially a PC with multiple interfaces. I've > > successfully built several PIX firewall using my old > > PCs (i.e. pentium 200 MHz processor). Actually, the > > PIX1 series (obsolete I know) is a PC with Intel > > EtherExpress Interface cards. However, you must have > > an account with CCO in order the software and download > > the software. The rest of the instructions on how to > > build a PIX firewall using PC is very simple. Anyone > > interested in learning it, let me know. > > > > Mike > > > > __ > > Do You Yahoo!? > > Get email alerts & NEW webcam video instant messaging with Yahoo! > Messenger > > http://im.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18621&t=18335 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: THE KEY: regarding cisco and SecureCRT software---> [7:18622]
thats pretty good! :) -Original Message- From: John Neiberger [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 05, 2001 7:14 AM To: Eric Rivard; [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: THE KEY: regarding cisco and SecureCRT software---> [7:18486] Actually, this is an encoded license key. To properly interpret the key you must first remove all of the numbers, leaving all of the letters. Hopefully, this will clear some things up! Regards, John >>> "Brian Whalen" 9/4/01 11:23:55 PM >>> Ditto, it is shareware, you get a 30 day eval for free, after that yer sposed to pay em if u keep using it.. Brian "Sonic" Whalen Success = Preparation + Opportunity On Tue, 4 Sep 2001, Eric Rivard wrote: > Isn't this program a licensed program that you NEED to purchase to use? > Are we all into piracy? Also the software has strict rules about being > exported across seas, before we give out serial numbers we should see if > we are breaking any licensing policies. > > -Original Message- > From: John Neiberger > Sent: Tue 9/4/2001 2:43 PM > To: [EMAIL PROTECTED] > Cc: > Subject: Re: regarding cisco and SecureCRT software---> > [7:18486] > > > > Sure, no problem. Here they are: > > Serial No: 09-02-191523 > > Key: K5I6 S2S3 M6Y5 B3I2 G1F2 A8T5 B9U3 T5T2 > > good luck, hope that helps. > > John > > >>> "[EMAIL PROTECTED]" 9/4/01 3:13:22 PM >>> > Hey there: > > Does anyone have the Serial number and license key for the > SecureCRT > ...I > can't seem to enable mine utilizing the keys. I'm assuming > these are > all > the > same, if anyone out there has the keys or wants to upload me a > direct > copy I > would greatly appreciate it...for some reason hyperterminal > doesn't > work > well > with cisco routers. > > thankx > [EMAIL PROTECTED] > > [GroupStudy.com removed an attachment of type application/ms-tnef which had > a name of winmail.dat] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18622&t=18622 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: THE KEY: regarding cisco and SecureCRT software---> [7:18625]
I wanted to clear things up. I really hope people don't think I'm stupid enough to pass out license keys! :-) Next thing you know, people will be asking for me to send them my CCNP/CCDP certification logos or something. heh heh John >>> "Eric Rivard" 9/5/01 9:25:15 AM >>> thats pretty good! :) -Original Message- From: John Neiberger [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 05, 2001 7:14 AM To: Eric Rivard; [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: THE KEY: regarding cisco and SecureCRT software---> [7:18486] Actually, this is an encoded license key. To properly interpret the key you must first remove all of the numbers, leaving all of the letters. Hopefully, this will clear some things up! Regards, John >>> "Brian Whalen" 9/4/01 11:23:55 PM >>> Ditto, it is shareware, you get a 30 day eval for free, after that yer sposed to pay em if u keep using it.. Brian "Sonic" Whalen Success = Preparation + Opportunity On Tue, 4 Sep 2001, Eric Rivard wrote: > Isn't this program a licensed program that you NEED to purchase to use? > Are we all into piracy? Also the software has strict rules about being > exported across seas, before we give out serial numbers we should see if > we are breaking any licensing policies. > > -Original Message- > From: John Neiberger > Sent: Tue 9/4/2001 2:43 PM > To: [EMAIL PROTECTED] > Cc: > Subject: Re: regarding cisco and SecureCRT software---> > [7:18486] > > > > Sure, no problem. Here they are: > > Serial No: 09-02-191523 > > Key: K5I6 S2S3 M6Y5 B3I2 G1F2 A8T5 B9U3 T5T2 > > good luck, hope that helps. > > John > > >>> "[EMAIL PROTECTED]" 9/4/01 3:13:22 PM >>> > Hey there: > > Does anyone have the Serial number and license key for the > SecureCRT > ...I > can't seem to enable mine utilizing the keys. I'm assuming > these are > all > the > same, if anyone out there has the keys or wants to upload me a > direct > copy I > would greatly appreciate it...for some reason hyperterminal > doesn't > work > well > with cisco routers. > > thankx > [EMAIL PROTECTED] > > [GroupStudy.com removed an attachment of type application/ms-tnef which had > a name of winmail.dat] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18625&t=18625 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: 100persent CPU Utilization [7:18584]
Hello Prabhu, What kind of box are you running and what version ? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18627&t=18584 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: how to build a pix firewall out of a PC box. [7:18335]
Count me in too. - Original Message - From: "Robert Perez" To: Sent: Wednesday, September 05, 2001 11:22 AM Subject: RE: how to build a pix firewall out of a PC box. [7:18335] > I'm in > > -Original Message- > From: jin Hotmail [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, September 05, 2001 10:19 AM > To: [EMAIL PROTECTED] > Subject: Re: how to build a pix firewall out of a PC box. [7:18335] > > > Could you send me the instruction as well. > Thanks in advance > - Original Message - > From: "Murphy, Brian J SITI-ISET-31" > To: > Sent: Wednesday, September 05, 2001 9:51 AM > Subject: RE: how to build a pix firewall out of a PC box. [7:18335] > > > > Me too :) > > > > -Original Message- > > From: Lowe, Jason [mailto:[EMAIL PROTECTED]] > > Sent: 05 September 2001 15:24 > > To: [EMAIL PROTECTED] > > Subject: RE: how to build a pix firewall out of a PC box. [7:18335] > > > > I would also like A copy of these instructions. Thank you. > > > > -Original Message- > > From: Richard [mailto:[EMAIL PROTECTED]] > > Sent: Tuesday, September 04, 2001 10:55 PM > > To: [EMAIL PROTECTED] > > Subject: Re: how to build a pix firewall out of a PC box. [7:18335] > > > > > > Count me in... > > > > > > ""mike johnson"" wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > Hi Everyone, > > > > > > For those who are interested in learning Cisco PIX but > > > do NOT want to spend a lot of money on buying an > > > expensive PIX Firewall, I think I can help you. I > > > have instructions on how to build a PIX firewall by > > > using a PC. In case you didn't know, PIX firewall is > > > essentially a PC with multiple interfaces. I've > > > successfully built several PIX firewall using my old > > > PCs (i.e. pentium 200 MHz processor). Actually, the > > > PIX1 series (obsolete I know) is a PC with Intel > > > EtherExpress Interface cards. However, you must have > > > an account with CCO in order the software and download > > > the software. The rest of the instructions on how to > > > build a PIX firewall using PC is very simple. Anyone > > > interested in learning it, let me know. > > > > > > Mike > > > > > > __ > > > Do You Yahoo!? > > > Get email alerts & NEW webcam video instant messaging with Yahoo! > > Messenger > > > http://im.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18628&t=18335 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
need definations for Frames, Packets, Segments [7:18629]
Hello All: I'm reading a lot of TCP/IP books and it seems no one author breaks down what a frame, packet or segment is. Can anyone define what these are or where I might find a site that explains? thank you Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18629&t=18629 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCIE : What version of IOS on R/S Lab [7:18565]
According to latest info on CCO, starting from Nov 15 12.1 will be in the lab. So, before that date, 12.0 is what you can expect. But, keep in mind that 12.0T is still 12.0, but with features found in 12.1 ! Sasa > Can anybody tell me if they know what version of IOS will be on the CCIE R/S > Lab Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18631&t=18565 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
remote ios upgrade? [7:18632]
Is there anyway to upgrade a 2500 router ios using a frame relay connection? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18632&t=18632 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Upgrade IOS for router 2501 [7:18581]
Bad Flash ""Lithium Leung"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi all, > > Router: 2501 > IOS: 9,14(9) > Flash: 4MB > Ram:4MB > Problem: Can't upgrade IOS to any version. (Try 10.3 - > (igs-in-l.103-13.bin) - and it is fulfill the HW config). Show check-sum > error. > > I would like to upgrade the IOS for 2501 router using tftp server which > is directly connected to my tftp server (Cross cable), unfortunately, it > was fail. The OS can be downloaded to the flash successfully, but it was > fail in checking checksum. It shown "invalid check-sum". What is the > problem? Thanks! > > Regards, > Lithium > > -- --- > > Router(boot)#sh ver > 3000 Bootstrap Software (IGS-RXBOOT), Version 9.14(9), RELEASE SOFTWARE > (fc1) > Patchlevel = 9.1(12.6) > Copyright (c) 1986-1994 by cisco Systems, Inc. > Compiled Wed 28-Sep-94 14:10 by chansen > > System Bootstrap, Version 4.14(9.1), SOFTWARE > > Router uptime is 1 day, 0 minutes > System restarted by power-on > Running default software > > cisco 2500 (68030) processor (revision A) with 2044K/2048K bytes of > memory. > Processor board serial number 01260438 > DDN X.25 software, Version 2.0, NET2 and BFE compliant. > 1 Ethernet/IEEE 802.3 interface. > 2 Serial network interfaces. > 32K bytes of non-volatile configuration memory. > > 4096K bytes of processor board System flash (Read/Write) > Configuration register is 0x2102 > I have a router 2501 and would like to upgrade its IOS Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18633&t=18581 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Use your HEAD! was how to build a pix firewall out of a PC [7:18635]
Come on people! Stop sending me - too messages to the list! Contact the original poster direct! 10,000 people do NOT need to know that you are also interested. Please re-read the posting guidelines! Thank you! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18635&t=18635 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: does vtp can span the router [7:18545]
VTP runs only on VLAN 1. Anyone know (or can test) what will happen in this topology: [SwitchA] -- isl trunk -- [Router] -- isl trunk -- [SwitchB] If router is configured for pure bridging between two ports, will VTP messages pass through it ? If yes, then answer to the original questions is "yes, router is vtp transparent". Sasa > i dont know which vlan can carry vtp,or like cdp-a purely layer > 2 protocol, does vtp indepent of vlan,it runs on native vlan?? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18634&t=18545 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Can you pass CCNP w/o having Cisco gears? [7:18124]
Well Eve, the glass ceiling and where a woman's place stigma is very prevalent in big established companies. I have female friends that work in the "corporate IT world" and no matter where they go it's all the same. Some not as bad as others but the old dogs from the IBM error just can except that a woman can do networking just as good if not better then a lot of men. One of them even told her they could not promote her because it would mean dealing with a lot of Japanese and Chinese clients, and in business that dog will not hunt with these groups so they would have to promote a man. In the integrator and ASP/ISP/.com world I have found women are greatly appreciated. We hired a female engineer and she fit like a glove. Every single guy from the help desk to the CEO has the utmost respect for her and is never shy to go to her and ask a Q if they think she may know. Take your test, know your stuff, show your worth. -Original Message- From: jap_e [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 05, 2001 9:54 AM To: [EMAIL PROTECTED] Subject: Re: Can you pass CCNP w/o having Cisco gears? [7:18124] Good question. I'm still trying to find out why. Perhaps I'm just sick & tired of my colleagues looking down upon my capabilities (being a female in this industry tends to be belittled by others, you see, esp in my part of the world.) Even the examination centers officers are puzzled to see me taking Cisco exams, when they would expect only guys to do such things. I'm being treated like a female clerk at the system integrator firm where I worked, being excluded out of all technical discussions because the guys just think "gee what do YOU know about this router/switch/firewall thing??" (For your reference, I've got a degree in Electrical Engineering, degree in Commerce, MCSE, etc etc). Is sexual discrimation prevalent everywhere in this IT industry, or just at my place? Guess I took my CCNP simply out of pride, just to show that "whatever you guys can do, I can do too." And perhaps, out of pride too, I will take my CCIE. Regards, Eve - Original Message - From: Jeroen Timmer To: 'jap_e' Sent: Tuesday, September 04, 2001 4:34 PM Subject: RE: Can you pass CCNP w/o having Cisco gears? [7:18124] Why even bother to be CCNP or CCIE when you never touch a router ?!?! It's not my concern what you do, or don't, but it just looked funny to me. Gaining CCNP without playing around with routers and stuff ? Why you wanna become CCNP ? grtz, JT -Original Message- From: jap_e [mailto:[EMAIL PROTECTED]] Sent: Monday, September 03, 2001 2:47 PM To: [EMAIL PROTECTED] Subject: Re: Can you pass CCNP w/o having Cisco gears? [7:18124] The answer is Yes, you can be a paper CCNP. I just turned CCNP last week and I have never touched a router before. Have never logged into a router, not used any router simulator software. (Yes I know how a router looked like from the pictures I've seen.) Neither did i cheat by using brain dumps. All the information for passing the exams only came from the 4 Sybex books (routing, switching, support, RA) Not trying to be proud here, but a paper CCNP is possible. Will take my written CCIE soon. As for the lab exam, hmm... we shall see... Cheers, Eve - Original Message - From: Christopher Supino To: [EMAIL PROTECTED] Sent: Monday, September 03, 2001 6:02 AM Subject: RE: Can you pass CCNP w/o having Cisco gears? [7:18124] Consider them rolled. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of B.J. Wilson Sent: Sunday, September 02, 2001 5:18 PM To: [EMAIL PROTECTED] Subject: Re: Can you pass CCNP w/o having Cisco gears? [7:18124] I heard that cert was still in Draft stage. (insert collective eye-roll here.) - Original Message - From: "Christopher Supino" To: Sent: Sunday, September 02, 2001 4:06 PM Subject: RE: Can you pass CCNP w/o having Cisco gears? [7:18124] > Nice Chuck. Don't forget to add CFTA(Certified Flush Toilet Administrator), > and MCBD(Miller Certified Beer Drinker). > > :) > > Chris > > -Original Message- > From: Chuck Larrieu [mailto:[EMAIL PROTECTED]] > Sent: Sunday, September 02, 2001 3:22 PM > To: Christopher Supino; [EMAIL PROTECTED] > Subject: RE: Can you pass CCNP w/o having Cisco gears? [7:18124] > > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Christopher Supino > Sent: Sunday, September 02, 2001 12:18 PM > To: [EMAIL PROTECTED] > Subject: RE: Can you pass CCNP w/o having Cisco gears? [7:18124] > > When did CCIE Written become a certification? I take serious issue with > engineers who do this. It only adds to the cheapening of the cert. Pass your > lab, get your number, call yourself a
RE: Can you pass CCNP w/o having Cisco gears? [7:18124]
In that case ... GET YOUR CCIE :) I'm glad we don't have sexual discrimination ... We got a few (sad but true .. Not many) female technicians here and they do a gr8 job. I just see them as a normal colleague not as male or female. But keep gaining knowledge and those basterds at your work have to eventualy see that you know where your talking about. They ought to see it at this moment but that's another thing :P All I can say is goodluck ... And don't let them get you down. It's time we got more women into the IT industry !!! Cheers, JT -Original Message- From: jap_e [mailto:[EMAIL PROTECTED]] Sent: woensdag 5 september 2001 16:54 To: [EMAIL PROTECTED] Subject: Re: Can you pass CCNP w/o having Cisco gears? [7:18124] Good question. I'm still trying to find out why. Perhaps I'm just sick & tired of my colleagues looking down upon my capabilities (being a female in this industry tends to be belittled by others, you see, esp in my part of the world.) Even the examination centers officers are puzzled to see me taking Cisco exams, when they would expect only guys to do such things. I'm being treated like a female clerk at the system integrator firm where I worked, being excluded out of all technical discussions because the guys just think "gee what do YOU know about this router/switch/firewall thing??" (For your reference, I've got a degree in Electrical Engineering, degree in Commerce, MCSE, etc etc). Is sexual discrimation prevalent everywhere in this IT industry, or just at my place? Guess I took my CCNP simply out of pride, just to show that "whatever you guys can do, I can do too." And perhaps, out of pride too, I will take my CCIE. Regards, Eve - Original Message - From: Jeroen Timmer To: 'jap_e' Sent: Tuesday, September 04, 2001 4:34 PM Subject: RE: Can you pass CCNP w/o having Cisco gears? [7:18124] Why even bother to be CCNP or CCIE when you never touch a router ?!?! It's not my concern what you do, or don't, but it just looked funny to me. Gaining CCNP without playing around with routers and stuff ? Why you wanna become CCNP ? grtz, JT -Original Message- From: jap_e [mailto:[EMAIL PROTECTED]] Sent: Monday, September 03, 2001 2:47 PM To: [EMAIL PROTECTED] Subject: Re: Can you pass CCNP w/o having Cisco gears? [7:18124] The answer is Yes, you can be a paper CCNP. I just turned CCNP last week and I have never touched a router before. Have never logged into a router, not used any router simulator software. (Yes I know how a router looked like from the pictures I've seen.) Neither did i cheat by using brain dumps. All the information for passing the exams only came from the 4 Sybex books (routing, switching, support, RA) Not trying to be proud here, but a paper CCNP is possible. Will take my written CCIE soon. As for the lab exam, hmm... we shall see... Cheers, Eve - Original Message - From: Christopher Supino To: [EMAIL PROTECTED] Sent: Monday, September 03, 2001 6:02 AM Subject: RE: Can you pass CCNP w/o having Cisco gears? [7:18124] Consider them rolled. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of B.J. Wilson Sent: Sunday, September 02, 2001 5:18 PM To: [EMAIL PROTECTED] Subject: Re: Can you pass CCNP w/o having Cisco gears? [7:18124] I heard that cert was still in Draft stage. (insert collective eye-roll here.) - Original Message - From: "Christopher Supino" To: Sent: Sunday, September 02, 2001 4:06 PM Subject: RE: Can you pass CCNP w/o having Cisco gears? [7:18124] > Nice Chuck. Don't forget to add CFTA(Certified Flush Toilet Administrator), > and MCBD(Miller Certified Beer Drinker). > > :) > > Chris > > -Original Message- > From: Chuck Larrieu [mailto:[EMAIL PROTECTED]] > Sent: Sunday, September 02, 2001 3:22 PM > To: Christopher Supino; [EMAIL PROTECTED] > Subject: RE: Can you pass CCNP w/o having Cisco gears? [7:18124] > > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Christopher Supino > Sent: Sunday, September 02, 2001 12:18 PM > To: [EMAIL PROTECTED] > Subject: RE: Can you pass CCNP w/o having Cisco gears? [7:18124] > > When did CCIE Written become a certification? I take serious issue with > engineers who do this. It only adds to the cheapening of the cert. Pass your > lab, get your number, call yourself a CCIE. Til then, you are a CCNP, CCDP. > My two cents. > > CL: about the same time the CCNP 2.0 became a certification. Some people > will do anything to make themselves look better > > Chuck > primary school diploma, high school diploma, Universal Life Church minister > Costco GoldStar Member, United Mileage Plus member, Calif. State AAA
RE: FECN/BECN below a CIR [7:18444]
If you feel that you maybe going over your CIR, I would suggest configuring traffic shaping on the router interface. The way I understand it, is that it will throttle the amount of traffic sent to the frame provider. If you see FECN and BECN's after configuring traffic shaping, you may have a case to contact the frame provider Watch the wrap. http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/qos_c /qcpart4/qcfrts.htm HTH, Eric -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 05, 2001 10:55 AM To: [EMAIL PROTECTED] Subject: Re: FECN/BECN below a CIR [7:18444] Don't forget as well that the time over which the CIR usage is calculated (I've forgotten the formal term and don't feel like searching for it right now) is generally of the order of a second (at least in this part of the world), while the load reported by the router is generally averaged over five minutes. If you have bursty traffic (routing updates, for example), you may be going above CIR for some periods, even though your five-minute average may be well under CIR. More relevant for DE rather than FECN/BECN, but something to keep in mind. JMcL - Forwarded by Jenny Mcleod/NSO/CSDA on 05/09/2001 09:48 am - "Karen E Young" To: [EMAIL PROTECTED] Subject: Re: FECN/BECN below a CIR [7:18444] Sent by: nobody@groups tudy.com 05/09/2001 05:42 am Please respond to "Karen E Young" If you're getting FECN/BECN traffic then its experiencing congestion. Congestion on the FR network prior to CIR being met is indeed a good sign of oversubscription. If its only occasional then it may simply have been a spike on the switch. However, if you're getting it fairly regularly, then you need to talk to your provider. There's NO reason to set FECN/BECN when there isn't congestion. Ask them how they determine subscription load. Some providers (such as Sprint last I heard) use the CIR to determine load on a switch, not the actual traffic. If they have alot of customers with 0 CIR then the switch can easily get oversubscribed to the point that the provider can no longer meet the CIR of their customers. HTH, Karen *** REPLY SEPARATOR *** On 9/4/2001 at 2:19 PM Paul Borghese wrote: >Does anyone know if a Frame Relay provider will send FECN/BECN messages even >if the CIR is not oversubscribed? > >Is looking at the FECN/BECN traffic a good determination of CIR >oversubscription? > >Paul Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18630&t=18444 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
PIX BOX Maker! : ( [7:18626]
Hi the owner of the pix starter! Sean Young [EMAIL PROTECTED] Mike Johnson [EMAIL PROTECTED] Who are you? Have you finished your Pig In Xmas? Take a pix for us and have a look at your PIX please. Especially, the 16M flash card, I want to see the pix of these card. Moreover, your email [EMAIL PROTECTED] I've seen this in some braindump site For the instructions? Is this you paypal ID for later use? By the way, how did you make the console to the PIX? Thanks James, you've reminded something --- No free lunch. anyong p.s. Sorry for the bad English writing, it's not my mother language. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18626&t=18626 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Version IOS for "Code Red" Nbar [7:18637]
I am trying to configure NBAR for the "Code Red" fix. I have a 2600. I want IOS to support FW/IDS. I have tried it with 12.1(5)T7 and T10. Each time I enter the command: match protocol http url "*default.ida*" The router reboots. Are any of you using NBAR with FW/IDS?? What version works??? ^-^-^-^-^-^-^-^-^-^-^ Bill Carter CCIE 5022 ^-^-^-^-^-^-^-^-^-^-^ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18637&t=18637 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: need definations for Frames, Packets, Segments [7:18629]
Frame = layer 2 "packet" format (ethernet for example) Packet = Layer 3 "packet" format (IP for example) Segment = Layer 4 "packet" format (TCP for example) Hope it helps Lionel At 12:20 PM 9/5/2001 -0400, [EMAIL PROTECTED] wrote: >Hello All: > >I'm reading a lot of TCP/IP books and it seems no one author breaks down >what >a frame, packet or segment is. Can anyone define what these are or where I >might find a site that explains? > >thank you Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18638&t=18629 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Can you pass CCNP w/o having Cisco gears? [7:18124]
Pamela Forsythe sp? , a former regular contributor to this list mentioned how difficult is was for her to be taken seriously in meetings - until she attained CCIE. Good luck Eve. > -Original Message- > From: jap_e [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, September 05, 2001 9:54 AM > To: [EMAIL PROTECTED] > Subject: Re: Can you pass CCNP w/o having Cisco gears? [7:18124] > > > Good question. I'm still trying to find out why. > > Perhaps I'm just sick & tired of my colleagues looking down upon my > capabilities (being a female in this industry tends to be belittled by > others, > you see, esp in my part of the world.) Even the examination > centers officers > are puzzled to see me taking Cisco exams, when they would > expect only guys to > do such things. > > I'm being treated like a female clerk at the system > integrator firm where I > worked, being excluded out of all technical discussions > because the guys just > think "gee what do YOU know about this router/switch/firewall > thing??" (For > your reference, I've got a degree in Electrical Engineering, degree in > Commerce, MCSE, etc etc). Is sexual discrimation prevalent > everywhere in > this > IT industry, or just at my place? > > Guess I took my CCNP simply out of pride, just to show that > "whatever you > guys > can do, I can do too." > > And perhaps, out of pride too, I will take my CCIE. > > Regards, Eve Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18639&t=18124 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: what is the native vlan function in trunk? [7:18543]
Imagine that you use 802.1q trunk, with different native vlan on switches. Traffic from two different vlans will mix between those two switches, and will flow to the rest of the network. It will be two IP subnets on one LAN. BTW, see: http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t3/dtbridge.htm Sasa Guest wrote: > > " you can see this could cause some serious > problems if different VLANs are configured as the native VLAN at each end of > the trunk." > i still can not imaging what type of problem will occur,can you show me some > examples? > now i have enough switch to prove it ,this problem has confused me for days. > thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18641&t=18543 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: remote ios upgrade? [7:18632]
Sure, but it requires some precautions. This can be hazardous since it's very easy to lock yourself out of the remote router. Double check these instructions before you use them. I accept no responsibility for my typos or omissions. ;-) 1. Verify that the router has sufficient total flash memory to hold the image 2. Enter config mode and set the default gateway using the ip default-gateway command. Make the gateway the ip address of the nearest upstream neighbor on that particular link. 3. Type "config-reg 0x101" so that the router will boot from ROM. 4. Supposedly, if the router has more than one serial port, you're supposed to shutdown the ones that won't be used here but I'm not sure if that's true or not. 5. Save the config and reload the router 6. Re-establish your telnet session once the router is done rebooting. It will boot to the "router(boot)>" prompt. 7. Put the router in privileged (enable) mode 8. Issue the "copy tftp flash" command with the necessary parameters 9. After transfer is complete, go to config mode and type "config-reg 0x2102" and exit config mode. 10. DO NOT SAVE THE CONFIG AT THIS POINT! This will write a boot ROM version of your config to NVRAMa "bad" thing. 11. Reload the router. Do *NOT* reply "yes" when it asks if you want to save the config! 12. Re-establish telnet session. Remove ip default-gateway command and do a no shutdown on those interfaces mentioned earlier. 13. Save your config to NVRAM. I know, that's a lot of work but you have to be careful. You might want to try this on routers that aren't too far away first, just in case you need to make a special trip. Good luck, John >>> "Jerry Deer" 9/5/01 10:31:26 AM >>> Is there anyway to upgrade a 2500 router ios using a frame relay connection? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18640&t=18632 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: remote ios upgrade? [7:18632]
With a distant TFTP server, it's possible. command : copy tftp flash xxx.bin A.B.C.D where xxx.bin is the name of the IOS on your TFTP flash and A.B.C.D is the @IP of yout tftp server Hope it helps. Lionel At 12:31 PM 9/5/2001 -0400, Jerry Deer wrote: >Is there anyway to upgrade a 2500 router ios using a frame relay connection? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18642&t=18632 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Version IOS for "Code Red" Nbar [7:18637]
no fw or ids...but I am running 12.2 and it works flawless. -Patrick >>> "Bill Carter" 09/05/01 12:39PM >>> I am trying to configure NBAR for the "Code Red" fix. I have a 2600. I want IOS to support FW/IDS. I have tried it with 12.1(5)T7 and T10. Each time I enter the command: match protocol http url "*default.ida*" The router reboots. Are any of you using NBAR with FW/IDS?? What version works??? ^-^-^-^-^-^-^-^-^-^-^ Bill Carter CCIE 5022 ^-^-^-^-^-^-^-^-^-^-^ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18643&t=18637 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: remote ios upgrade? [7:18632]
Yes, there are ways. If rom image (conf-reg 0x2101) support subinterfaces, than everything will work, if it doesn't (more likely) that you have to configure physical interface. And, don't forget 'ip default-gateway a.b.c.d'. Sasa > Is there anyway to upgrade a 2500 router ios using a frame relay connection? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18644&t=18632 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: remote ios upgrade? [7:18632]
Nothing different whether it's frame, HDLC, PPP ATM... The main issue is if your tftp server is not on a directly connected network you will need to add the ip default-gateway x.x.x.x since the 2500 in bootmode cannot route. Dave Dave Jerry Deer wrote: > > Is there anyway to upgrade a 2500 router ios using a frame relay connection? -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18646&t=18632 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: need definations for Frames, Packets, Segments [7:18629]
Have you checked out Comer's Internetworking with TCP/IP?? Dave "[EMAIL PROTECTED]" wrote: > > Hello All: > > I'm reading a lot of TCP/IP books and it seems no one author breaks down > what > a frame, packet or segment is. Can anyone define what these are or where I > might find a site that explains? > > thank you -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18645&t=18629 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: does vtp can span the router [7:18545]
A VTP transparent device does not advertise its VLAN configuration and does not synchronize its VLAN configuration based on received advertisements. However, VTP-transparent devices do forward received VTP advertisements to other devices. I can imagine a situation where a router with VLANs implemented is sitting in the middle of a Layer 2 topology and you want the router to be in VTP transparent mode so that it passes VTP advertisements onto switches on the other side of it. It doesn't seem like a very good design, but it could happen. Priscilla At 10:19 AM 9/5/01, Guest wrote: >I believe it means that the router will not listen to the vtp messages. It >will also not pass them along- it is strictly layer 2. >pass them along,you mean just transfer it ,right?but i don't know where it >go,see my >last message,i dont >know which vlan can carry vtp,or like cdp-a purely layer 2 protocol, >does vtp indepent of vlan,it runs on native vlan?? >i dont find ways to prove it. >anyway ,thanks a lot Priscilla Oppenheimer http://www.priscilla.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18648&t=18545 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: need definations for Frames, Packets, Segments [7:18629]
A lot of people use the term "frame" only when discussing a data-link-layer protocol data unit. The term "packet" is used only when discussing a network-layer protocol data unit. Many experts are loose with these terms, however. I'm working with an expert right now who doesn't bother with those definitions and uses the terms interchangeably. Segment, on the other hand, does have a specific meaning. It is the protocol data unit used by TCP. Priscilla At 12:20 PM 9/5/01, [EMAIL PROTECTED] wrote: >Hello All: > >I'm reading a lot of TCP/IP books and it seems no one author breaks down >what >a frame, packet or segment is. Can anyone define what these are or where I >might find a site that explains? > >thank you Priscilla Oppenheimer http://www.priscilla.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18647&t=18629 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: how to make a router firewall? [7:18268]
The firewall IOS is quite good however, if you do not wish to utilize it you can simply create ACLs that reflect your desires accordingly. ACLs are in laymans terms, the low brow fire wall rule set so have at it! -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Jim Bond Sent: Sunday, September 02, 2001 8:57 PM To: [EMAIL PROTECTED] Subject: how to make a router firewall? [7:18268] Hello, I'm trying to make a 1720 router as firewall. What IOS should I use? What ACLs should I put in the router? My understanding on firewall is to allow outgoing traffic and block incoming traffic unless it's originated from inside, is it correct? Thanks in advance. Jim __ Do You Yahoo!? Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger http://im.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18650&t=18268 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: remote ios upgrade? [7:18632]
You are right but if your bootroms are later than 10.x they then contain the boot load helper which does all those manual steps John listed for you. In which case you need only set you default-gateway and then do the "copy tftp flash" If under the sh ver the bootroms are listed as 4.1.x or 5.1.x add 5 to the first digit to get what IOS these bootroms are, i.e. 4=9 and 5=10. Don't know why they ever did that:( Dave John Neiberger wrote: > > Sure, but it requires some precautions. This can be hazardous since > it's very easy to lock yourself out of the remote router. Double check > these instructions before you use them. I accept no responsibility for > my typos or omissions. ;-) > > 1. Verify that the router has sufficient total flash memory to hold the > image > 2. Enter config mode and set the default gateway using the ip > default-gateway command. Make the gateway the ip address of the nearest > upstream neighbor on that particular link. > 3. Type "config-reg 0x101" so that the router will boot from ROM. > 4. Supposedly, if the router has more than one serial port, you're > supposed to shutdown the ones that won't be used here but I'm not sure > if that's true or not. > 5. Save the config and reload the router > 6. Re-establish your telnet session once the router is done rebooting. > It will boot to the "router(boot)>" prompt. > 7. Put the router in privileged (enable) mode > 8. Issue the "copy tftp flash" command with the necessary parameters > 9. After transfer is complete, go to config mode and type "config-reg > 0x2102" and exit config mode. > 10. DO NOT SAVE THE CONFIG AT THIS POINT! This will write a boot ROM > version of your config to NVRAMa "bad" thing. > 11. Reload the router. Do *NOT* reply "yes" when it asks if you want > to save the config! > 12. Re-establish telnet session. Remove ip default-gateway command > and do a no shutdown on those interfaces mentioned earlier. > 13. Save your config to NVRAM. > > I know, that's a lot of work but you have to be careful. You might > want to try this on routers that aren't too far away first, just in case > you need to make a special trip. > > Good luck, > John > > >>> "Jerry Deer" 9/5/01 10:31:26 AM >>> > Is there anyway to upgrade a 2500 router ios using a frame relay > connection? -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18649&t=18632 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
console port broken, how can i login in router? [7:18651]
i used aux port and telnet for login, but both only can into > mode, and i pressed ctrl+break to revise confreg, but not work, it seems the router ignore what i pressed. any segguestion? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18651&t=18651 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Can you pass CCNP w/o having Cisco gears? [7:18124]
When I started in the industry in 1980, I would say that about 5% of the men I encountered were MCPs. I expected that to change, but it didn't. In 2001, I would say that still about 5% of the men I work with are MCPs. They are prejudiced against women. The word comes from pre and judge. They pre judge me and make assumptions that I'm not technical. Proving them wrong doesn't work in some cases. Some of them continue to judge me based on body parts rather than technical skills, and they don't listen to me. If they don't listen, I can't prove them wrong. Oh, well. These days I just ignore the MCPs and move on. ;-) At least it's only 5%. In the 1950s it would have been much worse, and it sounds like it's still worse in some parts of the world. I think it will change, at least to the point that the MCPs are a very small majority. (Five percent may be a constant. ;-) Certifications are definitely a good way to avoid some of the pre-judging. Go for it, Eve! Good luck to you. Priscilla At 12:35 PM 9/5/01, Steve Smith wrote: >Well Eve, the glass ceiling and where a woman's place stigma is very >prevalent in big established companies. I have female friends that work >in the "corporate IT world" and no matter where they go it's all the >same. Some not as bad as others but the old dogs from the IBM error just >can except that a woman can do networking just as good if not better >then a lot of men. One of them even told her they could not promote her >because it would mean dealing with a lot of Japanese and Chinese >clients, and in business that dog will not hunt with these groups so >they would have to promote a man. > >In the integrator and ASP/ISP/.com world I have found women are greatly >appreciated. We hired a female engineer and she fit like a glove. Every >single guy from the help desk to the CEO has the utmost respect for her >and is never shy to go to her and ask a Q if they think she may know. > >Take your test, know your stuff, show your worth. > >-Original Message- >From: jap_e [mailto:[EMAIL PROTECTED]] >Sent: Wednesday, September 05, 2001 9:54 AM >To: [EMAIL PROTECTED] >Subject: Re: Can you pass CCNP w/o having Cisco gears? [7:18124] > > >Good question. I'm still trying to find out why. > >Perhaps I'm just sick & tired of my colleagues looking down upon my >capabilities (being a female in this industry tends to be belittled by >others, >you see, esp in my part of the world.) Even the examination centers >officers >are puzzled to see me taking Cisco exams, when they would expect only >guys to >do such things. > >I'm being treated like a female clerk at the system integrator firm >where I >worked, being excluded out of all technical discussions because the guys >just >think "gee what do YOU know about this router/switch/firewall thing??" >(For >your reference, I've got a degree in Electrical Engineering, degree in >Commerce, MCSE, etc etc). Is sexual discrimation prevalent everywhere >in >this >IT industry, or just at my place? > >Guess I took my CCNP simply out of pride, just to show that "whatever >you >guys >can do, I can do too." > >And perhaps, out of pride too, I will take my CCIE. > >Regards, Eve > Priscilla Oppenheimer http://www.priscilla.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18652&t=18124 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Frame Relay - Behind The Scenes... [7:18653]
I am getting a Frame Relay setup and I just got the local loop installed and tested today by the local telco. I know that the Frame Relay provider hasn't started their configuration yet, but shouldn't I be able to see just one little change on my router when I connect the CSU/DSU to the local loop box? I have done a: show interface serial 0/0 show interface serial 0/0.101 show frame-relay lmi show controllers serial 0/0 and everything is exactly the same before and after connecting the cable. Thanks for any comments on this. Ole ~~~ Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] ~~~ http://www.RouterChief.com ~~~ NEED A JOB ??? http://www.oledrews.com/job ~~~ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18653&t=18653 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCNA question with routing setup [7:18572]
check you rip, is there a command passive-interface is used?[EMAIL PROTECTED] wrote: > > I have 2 2501 routers setup as follows: > > RouterA eth0 with 192.168.254.1/24 > RouterA serial 0 with 192.168.100/24 > setup as DTE, no shutdown, router rip > network 192.168.0.0 > > RouterB eth0 with 192.168.50.1/24 > RouterB serial 0 with 192.168.100.11/24 > setup as DCE, clock rate 64000, no shutdown, router rip > network 192.168.0.0 > > My problem is it won't see any of the networks...do I have this > number setup > wrong? when I setup a static IP ROUTE..the networks work fine > and see each > other its just with RIP for some reason is unable to see the > other > networks...what am I doing wrong? > > thank you all > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18654&t=18572 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Frame Relay - Behind The Scenes... [7:18653]
Hi, You are not going to see anything until the provider activates the frame relay port that you are tied into. >From your description, all that has happened is that the lec came out and install a local access circuit to your provider. If you have configured your serial int for frame relay, it will send out a lmi status request to the frame switch. Once your proivder activates the frame port, it will see the request and then reply back with a lmi status. If they have not turned up the port, all your router will do is send out the request but it will not get back anything, thus.. you will not see anything new on the router. Paul Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18655&t=18653 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: remote ios upgrade? [7:18632]
Ah, good point. Those instructions were from when we were upgrading to 11.2 a couple of years ago. Back then, our boot ROMS were 10.2, IIRC, so all of these steps were necessary. I haven't done many upgrades on a 2500 series since then. I have done a few and I forgot that it was a little easier now. It's still not as easy as a 2600, though. Those are really painless, especially if you have loads of flash memory. John >>> MADMAN 9/5/01 11:41:32 AM >>> You are right but if your bootroms are later than 10.x they then contain the boot load helper which does all those manual steps John listed for you. In which case you need only set you default-gateway and then do the "copy tftp flash" If under the sh ver the bootroms are listed as 4.1.x or 5.1.x add 5 to the first digit to get what IOS these bootroms are, i.e. 4=9 and 5=10. Don't know why they ever did that:( Dave John Neiberger wrote: > > Sure, but it requires some precautions. This can be hazardous since > it's very easy to lock yourself out of the remote router. Double check > these instructions before you use them. I accept no responsibility for > my typos or omissions. ;-) > > 1. Verify that the router has sufficient total flash memory to hold the > image > 2. Enter config mode and set the default gateway using the ip > default-gateway command. Make the gateway the ip address of the nearest > upstream neighbor on that particular link. > 3. Type "config-reg 0x101" so that the router will boot from ROM. > 4. Supposedly, if the router has more than one serial port, you're > supposed to shutdown the ones that won't be used here but I'm not sure > if that's true or not. > 5. Save the config and reload the router > 6. Re-establish your telnet session once the router is done rebooting. > It will boot to the "router(boot)>" prompt. > 7. Put the router in privileged (enable) mode > 8. Issue the "copy tftp flash" command with the necessary parameters > 9. After transfer is complete, go to config mode and type "config-reg > 0x2102" and exit config mode. > 10. DO NOT SAVE THE CONFIG AT THIS POINT! This will write a boot ROM > version of your config to NVRAMa "bad" thing. > 11. Reload the router. Do *NOT* reply "yes" when it asks if you want > to save the config! > 12. Re-establish telnet session. Remove ip default-gateway command > and do a no shutdown on those interfaces mentioned earlier. > 13. Save your config to NVRAM. > > I know, that's a lot of work but you have to be careful. You might > want to try this on routers that aren't too far away first, just in case > you need to make a special trip. > > Good luck, > John > > >>> "Jerry Deer" 9/5/01 10:31:26 AM >>> > Is there anyway to upgrade a 2500 router ios using a frame relay > connection? [EMAIL PROTECTED] -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18656&t=18632 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: IP unnumbered [7:18250]
In previous network monitoring experience, I have had it happen to me where a customer unplugs the lan to do some work, but leaves the serial in, thinking theyre doing us a favor. Brian "Sonic" Whalen Success = Preparation + Opportunity On Wed, 5 Sep 2001, Bill Carter wrote: > The Loopback Interface is useful in OSPF, BGP, for network management. If > a loopback will have 2-3 uses anyway, why not throw in ip unnumbered. > > If someone is dead set against loopback, you could use > > interface serial 0/0 > ip unnumbered > interface ethernet 0/0 > ip address 10.1.1.1 255.255.255.0 > no keepalive > > The Ethernet interface would always be up!! > > ^-^-^-^-^-^-^-^-^-^-^ > Bill Carter > CCIE 5022 > ^-^-^-^-^-^-^-^-^-^-^ > > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Michael L. Williams > Sent: Tuesday, September 04, 2001 5:49 PM > To: [EMAIL PROTECTED] > Subject: Re: IP unnumbered [7:18250] > > > Dave, > > I agree totally with your statement, however, I don't understand why you say > that if you use ip unnumbered pointing to a LoopBack interface that > nullifies the point of using unnumbered (to save IPs). You can still use a > single IP address on a LoopBack not waste more by putting separate IPs on > each p-t-p link.. > > Mike W. > > "MADMAN" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Brett gives a good example that will work just fine but I would not > > recommend using IP unnumbered. With RFC 1918 you have more IP addesses > > than your going to need so no problems with using registered addresses > > on p-to-p links. troubleshooting also becomes trickier but if you > > insist on using them then use a loopback interface, but then a primary > > argument is shot, burning IP addreses. > > > > Dave > > > > Brett Hairbottle wrote: > > > > > > Hi > > > > > > Instead of using a "numbered link" you can use ip unnumbered to connect > > > sites. > > > Example: > > > > > > Router A: > > > interface fastethernet 0 > > > ip address 10.100.2.1 255.255.255.0 > > > interface serial 0 > > > ip unnumbered fasthethernet 0 > > > > > > Router B: > > > interface fastethernet 0 > > > ip address 10.100.31 255.255.255.0 > > > interface serial 0 > > > ip unnumbered fasthethernet 0 > > > > > > now instead of assigning a ip address to each serial port you can use > the > > ip > > > unnumbered command > > > > > > Brett Hairbottle > > > Network Administrator > > > CCNA > > > - Original Message - > > > From: "sami natour" > > > To: > > > Sent: Sunday, September 02, 2001 10:33 PM > > > Subject: IP unnumbered [7:18250] > > > > > > > Hello everybody, > > > > I know how to cinfigure IP unumbered but I do not know > > > > any practical scenario that I make use of this > > > > feature.Any body has specific scanrios where I can > > > > use ip unnumbered . > > > > > > > > Regards , > > > > sami > > > > > > > > > > > > __ > > > > Do You Yahoo!? > > > > Get email alerts & NEW webcam video instant messaging with Yahoo! > > > Messenger > > > > http://im.yahoo.com > > -- > > David Madland > > Sr. Network Engineer > > CCIE# 2016 > > Qwest Communications Int. Inc. > > [EMAIL PROTECTED] > > 612-664-3367 > > > > "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18658&t=18250 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: console port broken, how can i login in router? [7:18651]
Does it havve a configuration on it? If not then the serial interfaces can SLARP a config on to the router. EALouie is an expert on this and he is part of the mailing list. Raul - Original Message - From: "xie rootstock" To: Sent: Wednesday, September 05, 2001 2:09 PM Subject: console port broken, how can i login in router? [7:18651] > i used aux port and telnet for login, but both only can into > mode, and i > pressed ctrl+break to revise confreg, but not work, it seems the router > ignore what i pressed. > > any segguestion? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18657&t=18651 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCNA question with routing setup [7:18572]
sorry, my last posting is wrong, you should set network 192.168.100.0, not network 192.168.0.0 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18659&t=18572 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: console port broken, how can i login in router? [7:18651]
Unfortunately the router doesn't accept the break sequence on the auxiliary port, just on the console port... :( ER - Original Message - From: "xie rootstock" To: Sent: Wednesday, September 05, 2001 3:09 PM Subject: console port broken, how can i login in router? [7:18651] i used aux port and telnet for login, but both only can into > mode, and i pressed ctrl+break to revise confreg, but not work, it seems the router ignore what i pressed. any segguestion? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18661&t=18651 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: does vtp can span the router [7:18545]
Does a VTP advertisement have a layer 3 address? I thought these were only heard within a broadcast domain. How does the router know who to pass these to on the other side? >From: "Priscilla Oppenheimer" >Reply-To: "Priscilla Oppenheimer" >To: [EMAIL PROTECTED] >Subject: Re: does vtp can span the router [7:18545] >Date: Wed, 5 Sep 2001 13:51:37 -0400 > >A VTP transparent device does not advertise its VLAN configuration and does >not synchronize its VLAN configuration based on received advertisements. >However, VTP-transparent devices do forward received VTP advertisements to >other devices. > >I can imagine a situation where a router with VLANs implemented is sitting >in the middle of a Layer 2 topology and you want the router to be in VTP >transparent mode so that it passes VTP advertisements onto switches on the >other side of it. It doesn't seem like a very good design, but it could >happen. > >Priscilla > >At 10:19 AM 9/5/01, Guest wrote: > >I believe it means that the router will not listen to the vtp messages. >It > >will also not pass them along- it is strictly layer 2. > >pass them along,you mean just transfer it ,right?but i don't know where >it > >go,see my > >last message,i dont > >know which vlan can carry vtp,or like cdp-a purely layer 2 protocol, > >does vtp indepent of vlan,it runs on native vlan?? > >i dont find ways to prove it. > >anyway ,thanks a lot > > >Priscilla Oppenheimer >http://www.priscilla.com _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18662&t=18545 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Frame Relay - Behind The Scenes... [7:18653]
Not exactly. Do your interfaces show down/down? Do a sh frame-relay pvc and see if you see your PVC out there. You can also run debug frame-relay lmi and see if you have the right dlci out there. If you have term mon on you may see the interface come up and then go back down when you hook up the line. You will probably stay in that state until they start taking to you. regards, Steve -Original Message- From: Ole Drews Jensen [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 05, 2001 1:16 PM To: [EMAIL PROTECTED] Subject: Frame Relay - Behind The Scenes... [7:18653] I am getting a Frame Relay setup and I just got the local loop installed and tested today by the local telco. I know that the Frame Relay provider hasn't started their configuration yet, but shouldn't I be able to see just one little change on my router when I connect the CSU/DSU to the local loop box? I have done a: show interface serial 0/0 show interface serial 0/0.101 show frame-relay lmi show controllers serial 0/0 and everything is exactly the same before and after connecting the cable. Thanks for any comments on this. Ole ~~~ Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] ~~~ http://www.RouterChief.com ~~~ NEED A JOB ??? http://www.oledrews.com/job ~~~ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18660&t=18653 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: console port broken, how can i login in router? [7:18651]
Try setting the baud to 1200 or 2400 and hit the space bar while the router reboots (won't be able to see anything on screen). You will have to guess on the time it takes to boot, etc. Then set your baud back and you should have the rommon prompt. Has worked for me. >From: "xie rootstock" >Reply-To: "xie rootstock" >To: [EMAIL PROTECTED] >Subject: console port broken, how can i login in router? [7:18651] >Date: Wed, 5 Sep 2001 14:09:41 -0400 > >i used aux port and telnet for login, but both only can into > mode, and i >pressed ctrl+break to revise confreg, but not work, it seems the router >ignore what i pressed. > >any segguestion? _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18663&t=18651 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: remote ios upgrade? [7:18632]
Hi John, I tried these steps but I don't have the command "copy" under my "router(boot)" prompt. All I have is this: Router-R2(boot)#? exit logout lock show terminal disconnect name-connection resume where disable ping systat traceroute login telnet connect tunnel slip ppp pad x3 help Router-R2(boot)# I don't even have the "config-register" command, then I guess I'll have to do a break sequence to change the config-register back to it's original value. How can I update the flash in this case?? I tried tftp under normal privileged mode but it says that flash is write protected. Is this router "non-upgradeable"? This is the "sh ver" result for this router: Router-R2(boot)#sh ver Cisco Internetwork Operating System Software IOS (tm) 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWA RE (fc1) Copyright (c) 1986-1996 by cisco Systems, Inc. Compiled Fri 27-Dec-96 17:33 by loreilly Image text-base: 0x0101, data-base: 0x1000 ROM: System Bootstrap, Version 11.0(10c), SOFTWARE Router-R2 uptime is 7 minutes System restarted by reload Running default software cisco 2500 (68030) processor (revision N) with 6144K/2048K bytes of memory. Processor board ID 16316512, with hardware revision X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. 1 Ethernet/IEEE 802.3 interface. 2 Serial network interfaces. 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read/Write) Configuration register is 0x2101 Router-R2(boot)# - Original Message - From: "John Neiberger" To: Sent: Wednesday, September 05, 2001 1:58 PM Subject: Re: remote ios upgrade? [7:18632] Sure, but it requires some precautions. This can be hazardous since it's very easy to lock yourself out of the remote router. Double check these instructions before you use them. I accept no responsibility for my typos or omissions. ;-) 1. Verify that the router has sufficient total flash memory to hold the image 2. Enter config mode and set the default gateway using the ip default-gateway command. Make the gateway the ip address of the nearest upstream neighbor on that particular link. 3. Type "config-reg 0x101" so that the router will boot from ROM. 4. Supposedly, if the router has more than one serial port, you're supposed to shutdown the ones that won't be used here but I'm not sure if that's true or not. 5. Save the config and reload the router 6. Re-establish your telnet session once the router is done rebooting. It will boot to the "router(boot)>" prompt. 7. Put the router in privileged (enable) mode 8. Issue the "copy tftp flash" command with the necessary parameters 9. After transfer is complete, go to config mode and type "config-reg 0x2102" and exit config mode. 10. DO NOT SAVE THE CONFIG AT THIS POINT! This will write a boot ROM version of your config to NVRAMa "bad" thing. 11. Reload the router. Do *NOT* reply "yes" when it asks if you want to save the config! 12. Re-establish telnet session. Remove ip default-gateway command and do a no shutdown on those interfaces mentioned earlier. 13. Save your config to NVRAM. I know, that's a lot of work but you have to be careful. You might want to try this on routers that aren't too far away first, just in case you need to make a special trip. Good luck, John >>> "Jerry Deer" 9/5/01 10:31:26 AM >>> Is there anyway to upgrade a 2500 router ios using a frame relay connection? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18664&t=18632 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: console port broken, how can i login in router? [7:18651]
First step from the > prompt enter o. >o It should tell you what the present config register setting is. Post that value. Then reask your question. > -Original Message- > From: xie rootstock [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, September 05, 2001 1:10 PM > To: [EMAIL PROTECTED] > Subject: console port broken, how can i login in router? [7:18651] > > > i used aux port and telnet for login, but both only can into > > mode, and i > pressed ctrl+break to revise confreg, but not work, it seems > the router > ignore what i pressed. > > any segguestion? > Report misconduct > and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18665&t=18651 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: does vtp can span the router [7:18545]
VTP advertisements are sent to a data-link-layer multicast 01-00-0C-CC-CC-CC. The SNAP type is 2003 which distinguishes the frame from other Cisco frames that use that multicast (CDP and DISL, for example). As I said before, the router would have to be sitting in the middle of a Layer-2 topology. For example, a one-armed router would pass VTP from one subinterface to another, wouldn't it?? I'm just trying to explain the statement from a CIT book about the router being in VTP transparent mode, which was the original question. Perhaps someone else has more details. Priscilla At 06:29 PM 9/5/01, Jeff Smith wrote: >Does a VTP advertisement have a layer 3 address? I thought these were >only heard within a broadcast domain. How does the router know who to >pass these to on the other side? > > >>From: "Priscilla Oppenheimer" >>Reply-To: "Priscilla Oppenheimer" >>To: [EMAIL PROTECTED] >>Subject: Re: does vtp can span the router [7:18545] >>Date: Wed, 5 Sep 2001 13:51:37 -0400 >> >>A VTP transparent device does not advertise its VLAN configuration and does >>not synchronize its VLAN configuration based on received advertisements. >>However, VTP-transparent devices do forward received VTP advertisements to >>other devices. >> >>I can imagine a situation where a router with VLANs implemented is sitting >>in the middle of a Layer 2 topology and you want the router to be in VTP >>transparent mode so that it passes VTP advertisements onto switches on the >>other side of it. It doesn't seem like a very good design, but it could >>happen. >> >>Priscilla >> >>At 10:19 AM 9/5/01, Guest wrote: >> >I believe it means that the router will not listen to the vtp messages. >>It >> >will also not pass them along- it is strictly layer 2. >> >pass them along,you mean just transfer it ,right?but i don't know where it >> >go,see my >> >last message,i dont >> >know which vlan can carry vtp,or like cdp-a purely layer 2 protocol, >> >does vtp indepent of vlan,it runs on native vlan?? >> >i dont find ways to prove it. >> >anyway ,thanks a lot >> >> >>Priscilla Oppenheimer >>http://www.priscilla.com >_ >Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp > Priscilla Oppenheimer http://www.priscilla.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18667&t=18545 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Can you pass CCNP w/o having Cisco gears? [7:18124]
Ooops. No offence meant to the Microsoft Certified Professionals! ;-) I guess I'm showing my age. In my day, MCP meant male chauvinist pig. It's such a rude phrase that I abbreviate it. But it does apply, so I still use it (just abbreviated.) Priscilla At 02:10 PM 9/5/01, Priscilla Oppenheimer wrote: >When I started in the industry in 1980, I would say that about 5% of the >men I encountered were MCPs. I expected that to change, but it didn't. In >2001, I would say that still about 5% of the men I work with are MCPs. They >are prejudiced against women. The word comes from pre and judge. They pre >judge me and make assumptions that I'm not technical. Proving them wrong >doesn't work in some cases. Some of them continue to judge me based on body >parts rather than technical skills, and they don't listen to me. If they >don't listen, I can't prove them wrong. Oh, well. These days I just ignore >the MCPs and move on. ;-) > >At least it's only 5%. In the 1950s it would have been much worse, and it >sounds like it's still worse in some parts of the world. I think it will >change, at least to the point that the MCPs are a very small majority. >(Five percent may be a constant. ;-) > >Certifications are definitely a good way to avoid some of the pre-judging. >Go for it, Eve! Good luck to you. > >Priscilla > > >At 12:35 PM 9/5/01, Steve Smith wrote: > >Well Eve, the glass ceiling and where a woman's place stigma is very > >prevalent in big established companies. I have female friends that work > >in the "corporate IT world" and no matter where they go it's all the > >same. Some not as bad as others but the old dogs from the IBM error just > >can except that a woman can do networking just as good if not better > >then a lot of men. One of them even told her they could not promote her > >because it would mean dealing with a lot of Japanese and Chinese > >clients, and in business that dog will not hunt with these groups so > >they would have to promote a man. > > > >In the integrator and ASP/ISP/.com world I have found women are greatly > >appreciated. We hired a female engineer and she fit like a glove. Every > >single guy from the help desk to the CEO has the utmost respect for her > >and is never shy to go to her and ask a Q if they think she may know. > > > >Take your test, know your stuff, show your worth. > > > >-Original Message- > >From: jap_e [mailto:[EMAIL PROTECTED]] > >Sent: Wednesday, September 05, 2001 9:54 AM > >To: [EMAIL PROTECTED] > >Subject: Re: Can you pass CCNP w/o having Cisco gears? [7:18124] > > > > > >Good question. I'm still trying to find out why. > > > >Perhaps I'm just sick & tired of my colleagues looking down upon my > >capabilities (being a female in this industry tends to be belittled by > >others, > >you see, esp in my part of the world.) Even the examination centers > >officers > >are puzzled to see me taking Cisco exams, when they would expect only > >guys to > >do such things. > > > >I'm being treated like a female clerk at the system integrator firm > >where I > >worked, being excluded out of all technical discussions because the guys > >just > >think "gee what do YOU know about this router/switch/firewall thing??" > >(For > >your reference, I've got a degree in Electrical Engineering, degree in > >Commerce, MCSE, etc etc). Is sexual discrimation prevalent everywhere > >in > >this > >IT industry, or just at my place? > > > >Guess I took my CCNP simply out of pride, just to show that "whatever > >you > >guys > >can do, I can do too." > > > >And perhaps, out of pride too, I will take my CCIE. > > > >Regards, Eve > > > > > > >Priscilla Oppenheimer >http://www.priscilla.com Priscilla Oppenheimer http://www.priscilla.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18666&t=18124 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: remote ios upgrade? [7:18632]
I'll be honest...I have no idea why copy isn't available. config-reg should be available from config mode, but you should see copy from enable mode. Did you try typing "copy ?" to see if it displays? Sometimes commands exist but don't show up on the help display. If you really don't have a copy command, I really have no idea what to do given those commands you listed. Since you have 11.0 boot roms, it's possible that you have the config helper available from the regular IOS. Perhaps that's why copy is missing here, but I don't know. Try changing your config register back to 0x2102. Then, after setting your default-gateway, try copy the image to flash via tftp and see if the config helper appears. It will warn you that a reboot is going to occur. That's my only suggestion at the moment. Perhaps someone else might have something to add that would be more helpful. John >>> "Ednilson Rosa" 9/5/01 12:59:54 PM >>> Hi John, I tried these steps but I don't have the command "copy" under my "router(boot)" prompt. All I have is this: Router-R2(boot)#? exit logout lock show terminal disconnect name-connection resume where disable ping systat traceroute login telnet connect tunnel slip ppp pad x3 help Router-R2(boot)# I don't even have the "config-register" command, then I guess I'll have to do a break sequence to change the config-register back to it's original value. How can I update the flash in this case?? I tried tftp under normal privileged mode but it says that flash is write protected. Is this router "non-upgradeable"? This is the "sh ver" result for this router: Router-R2(boot)#sh ver Cisco Internetwork Operating System Software IOS (tm) 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWA RE (fc1) Copyright (c) 1986-1996 by cisco Systems, Inc. Compiled Fri 27-Dec-96 17:33 by loreilly Image text-base: 0x0101, data-base: 0x1000 ROM: System Bootstrap, Version 11.0(10c), SOFTWARE Router-R2 uptime is 7 minutes System restarted by reload Running default software cisco 2500 (68030) processor (revision N) with 6144K/2048K bytes of memory. Processor board ID 16316512, with hardware revision X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. 1 Ethernet/IEEE 802.3 interface. 2 Serial network interfaces. 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read/Write) Configuration register is 0x2101 Router-R2(boot)# - Original Message - From: "John Neiberger" To: Sent: Wednesday, September 05, 2001 1:58 PM Subject: Re: remote ios upgrade? [7:18632] Sure, but it requires some precautions. This can be hazardous since it's very easy to lock yourself out of the remote router. Double check these instructions before you use them. I accept no responsibility for my typos or omissions. ;-) 1. Verify that the router has sufficient total flash memory to hold the image 2. Enter config mode and set the default gateway using the ip default-gateway command. Make the gateway the ip address of the nearest upstream neighbor on that particular link. 3. Type "config-reg 0x101" so that the router will boot from ROM. 4. Supposedly, if the router has more than one serial port, you're supposed to shutdown the ones that won't be used here but I'm not sure if that's true or not. 5. Save the config and reload the router 6. Re-establish your telnet session once the router is done rebooting. It will boot to the "router(boot)>" prompt. 7. Put the router in privileged (enable) mode 8. Issue the "copy tftp flash" command with the necessary parameters 9. After transfer is complete, go to config mode and type "config-reg 0x2102" and exit config mode. 10. DO NOT SAVE THE CONFIG AT THIS POINT! This will write a boot ROM version of your config to NVRAMa "bad" thing. 11. Reload the router. Do *NOT* reply "yes" when it asks if you want to save the config! 12. Re-establish telnet session. Remove ip default-gateway command and do a no shutdown on those interfaces mentioned earlier. 13. Save your config to NVRAM. I know, that's a lot of work but you have to be careful. You might want to try this on routers that aren't too far away first, just in case you need to make a special trip. Good luck, John >>> "Jerry Deer" 9/5/01 10:31:26 AM >>> Is there anyway to upgrade a 2500 router ios using a frame relay connection? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=18669&t=18632 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
