RE: take me off this list, Please! [7:65428]
ha ha -Original Message- From: Symon Thurlow [mailto:[EMAIL PROTECTED] Sent: Friday, March 14, 2003 3:55 PM To: [EMAIL PROTECTED] Subject: RE: take me off this list, Please! [7:65428] Why? Are you a bad doctor? -Original Message- From: Edgar A. Howard [mailto:[EMAIL PROTECTED] Sent: 14 March 2003 13:45 To: [EMAIL PROTECTED] Subject: take me off this list, Please! [7:65428] Someone please get me off this list. I have tried everything. I used the website. Nothing works! My patients is running out. -edgar = This email has been content filtered and subject to spam filtering. If you consider this email is unsolicited please forward the email to [EMAIL PROTECTED] and request that the sender's domain be blocked from sending any further emails. = = Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=65470t=65428 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Problem with Cicso VPN Client 3.6.3.B-k9 connecting to a [7:65296]
If you can't ping out from the XP box then you have some other issue, but if the problem is only accessing the XP box from other machines then check the following: 1. Make sure that the Firewall Always On is not checked in the VPN Client settings. This setting is in effect even when the VPN Client is not in use. Keep in mind you will want to turn this back on if you connect this machine directly to the Internet and you aren't using the Windows XP built in firewall. 2. If the Firewall Always On is unchecked, make sure that the Windows XP Personal Firewall is not turned on for your network interface. This is located under the Advanced tab of your network adapter settings. -Original Message- From: d tran [mailto:[EMAIL PROTECTED] Sent: Tue 3/11/2003 8:30 AM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Cc: Subject: Problem with Cicso VPN Client 3.6.3.B-k9 connecting to a pix Hi, I have Cisco VPN client version 3.6.3.B-k-9 (latest version) running windows XP Service Pack 1. The IP address of this window machine is 172.16.1.200. I set up extended authentication on the Pix firewall for remote Cisco VPN users and everything is working great. The outside interface of the firewall is 172.16.1.1 with a netmask of 24 The problem is that whenever the windows is rebooted, no one on the 172.16.1.0/24 network can ping this Windows XP machine. I do have a unix machine on the same network (172.16.1.100). Basically the windows XP machine can not do anything because it has no network connectivity. Even the firewall can not ping the Windows XP machine. The only way for this to work is for me to uninstall Cisco VPN Client and reboot the Windows XP box. After the reboot, windows is working again. Now under Windows XP Task Manager, I do see a process CVPND.exe running that I don't recall with previous versions of Cisco VPN Client. Anyone has run into this problem before? Regards, David - Do you Yahoo!? Yahoo! Web Hosting - establish your business online Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=65296t=65296 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: VoIP from behind PIX [7:60859]
Good luck.. However you will get latency and jitter issues during the time the PIXs encrypt/decrypt the voice packets... Matt -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Simer Mayo Sent: Friday, 10 January 2003 6:05 PM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: VoIP from behind PIX 1. Will PIX 515 handle VoIP traffic? 2. Will PIX 501 handle VoIP traffic? 3. Can we VPN between 2 (site-to-site) and pass VoIP traffice thru the VPN Thanks Simer Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=60859t=60859 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Configuring A digi portserver for cisco anyone!!! [7:58453]
Does anybody have an idea on how to configure a digi portserver (terminal) so i can connect through it to my cisco routers. I have set up an ip address of 10.0.0.1 for the terminal server and can log in no problem whatsoever,however, Whilst i am in the root mode i cannot reverse telnet to any of the ports as it comes up with the following:- telnet 10.0.0.1 2001 err#43 : telnet : access to this port denied. I am using hyperterminal as the emulation program and i can reverse telnet into the routers if i change the setup of hyperterminal by keeping the ip address as 10.0.0.1 though changing the port to 2001. Im sure there must be a way for me to log into the digi portserver and then navigate to any of the routers without having to exit the current connection and then re establish a new one to the new port. Apologies if this off topic and a bit confusing though im getting confused with it. If anyone has a sample config of a digi portserver, that would be most helpful as well... Cheers Matt Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=58453t=58453 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: abort a ping [7:57644]
ctrl ^ x is how you leave a session (such as telnet) with another device. that is all you need to know about it. it may get you out of a ping as well but i don't think of that as anything you would need to know for an exam. just remember that it gets you out of a session, but leaves the session connected. hit enter to rejoin the last session, and disconnect to end it. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=57655t=57644 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: 640-901 BSCI [7:57599]
I'm curious how you studied for the IS-IS part. I studied the CiscoPress book on IS-IS and CCIE Routing and still failed that part. Fortunately I did well enough on the rest to pass it. I guess the BCSI class would be the best way to go - if someone else pays for it. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=57657t=57599 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cable Broadband Question!!!! [7:54700]
Hi, Can anyone offer me any advice on whether it's possible to configure one of my cisco routers to work as a cable broadband router instead of having to purchase a model that specifically does the task. I currently have a 1601R, 1603R and 2 x 2503 and im sure somebody last year had something posted about being able to use one of these routers.. Any help would be appreciated Matt CCNA UK Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=54700t=54700 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: 9/11 [7:53084]
I believe Dave is referring to Sujal's ambiguous post, which could easily be mis-interpreted ! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=53103t=53084 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: PIX Failover [7:51491]
yes, it will sync automatically, or you can force it with write standby HTH, ms --- Steven A. Ridder wrote: Speaking of stateful PIX's, if I make a change on 1 PIX, and it has failover on, will it automatically make a change on the other PIX? Gaz wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... In article , [EMAIL PROTECTED] says... Hi, In a Stataful configuration, and two PIX are interconnected via a dedicated Failover Fastethernet, in case of the Active unit's Internal interface fails, is there any method to shift traffic to the Standby unit's Internal interface to maintain connectivity, thanks. Leo Best Regards. Not sure what you mean there. That's what failover does unless I'm misunderstanding your question. You configure the main IP address for the interface and you configure a failover address. If the Pix's decide that the active one has a problem (power,interface down etc) the secondary pix takes over the main IP address. If the primary is still contactable it will have the failover IP address on its inside interface. That's why it's safe to telnet to the main IP address and you know that you're on the active Pix, but by console you need to do a show fail to make sure the device you're on is primary active or secondary active before you make changes. Regards, Gaz [EMAIL PROTECTED] __ Do You Yahoo!? HotJobs - Search Thousands of New Jobs http://www.hotjobs.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=51524t=51491 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Flash init failed (permission denied). [7:47825]
You are in ROM MON mode on the switch. You need to run the suggested commands flash_init load_helper boot once you do a flash_init and load_helper you can use the ? to see what command are available. You will probably need to load an image onto your switch using xmodem before it will boot properly. Marian Iordanescu wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi group, I have the folowing problem. have Found You the solution for this problem yet? C2950 Boot Loader (CALHOUN-HBOOT-M) Version 12.0(5.3)WC(1), MAINTENANCE INTERIM SOFTWARE Compiled Mon 30-Apr-01 07:56 by devgoyal WS-C2950-24 starting... Base ethernet MAC Address: 00:07:84:f9:09:40 Unable to initialize flash device at 0xBF00 -- device not found. Xmodem file system is available. Initializing Flash... ...no flash filesystems found. The system has been interrupted, or encountered an error during initializion of the flash filesystem. The following commands will initialize the flash filesystem, and finish loading the operating system software: flash_init load_helper boot switch: dir flash: unable to stat flash:/: permission denied switch: flash_init Initializing Flash... ...no flash filesystems found. switch: copy xmodem: flash:c2950-c3h2s-mz.120-5.3.WC.1.bin Begin the Xmodem or Xmodem-1K transfer now... CCBB0flash:c2950-c3h2s-mz.120-5.3.WC.1.bin: permission denied switch: Thank you in advance , Marian Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=47943t=47825 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: BPX [7:47008]
not -Original Message- From: Lupi, Guy Sent: Thursday, June 20, 2002 12:27 PM To: [EMAIL PROTECTED] Subject: RE: BPX [7:47008] It looks like they do: http://www.800teachme.com/cgi-bin/teachme/viewcourse.cgi?LIS1000D92AZ Has anyone ever gone to one of their classes? If so, are they worth the money? *-Original Message- *From: craig mcguinness [mailto:[EMAIL PROTECTED]] *Sent: Thursday, June 20, 2002 11:38 AM *To: [EMAIL PROTECTED] *Subject: RE: BPX [7:47008] * * *BPX is not an ATM protocol, it is an ATM Switch. It is part of Cisco's *former Stratacom line of Carrier ATM switches. I believe *Telecordia may still offer classes on the BPX, IGX and MGX. * * * Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=47090t=47008 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Fast Ether Channel [7:45271]
just fast ethernet and giga ethernet -Original Message- From: Reza [mailto:[EMAIL PROTECTED]] Sent: Tuesday, May 28, 2002 1:44 PM To: [EMAIL PROTECTED] Subject: Fast Ether Channel [7:45271] Dear Group, Does Fast EtherChannel support Ethernet, Fast Ethernet and Gigabit Ethernet? Thanks Reza Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45275t=45271 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: max number of Sub interfaces [7:45288]
check out the link below for your answer http://www.cisco.com/warp/public/63/idb_limit.html Matt Street -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Steven A. Ridder Sent: Tuesday, May 28, 2002 3:43 PM To: [EMAIL PROTECTED] Subject: max number of Sub interfaces [7:45288] Is there a max number of subinterfaces a router can handle before it slows down? Is this number constrained by memory on a router? But from a general design perspecitive, is there a limit to the number? Could I do 1000 subinterfaces on a router with no performance degredation? -- RFC 1149 Compliant Get in my head: http://sar.dynu.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=45290t=45288 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco 7400's [7:43536]
I am writing this wondering how many of you have installed the Cisco 7400's in your networks. We recently installed 2 in our network and we had nothing but hardware problems with them. One of the boxes had a bad etherent port and the other had a bad hssi card. Needless to say it was a nightmare. So now that we have the boxes installed they are re-booting from software forced crashes. We opened a case with Cisco and they acknowledged that the 7400's have hardware issues and they are sending us 2 of the newer models that resolve the initial models problems. Have any of you out there experienced the same problems as we have? And if so did the newer replacement boxes resolve the issues? Thanks for any input. Matt Street Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=43536t=43536 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: WIC-1ADSL, Qwest DSL [7:41713]
Mark, I should have started with the config on http://www.cisco.com/warp/public/794/wicadsl_rfc_irb_nat_1.html After a lot of trial and error (and trying to not take my web site offline to much in the process), I managed to get a working configuration. Here is my configuration, minus a few unrelated lines, in case it helps somebody else. The config below bridges ATM0/0 and fa0/0 (my DMZ) then my private network is behind fa0/1. Now back to resetting all of my security back up... ! bridge irb ! interface ATM0/0 no ip address no atm ilmi-keepalive no cdp enable pvc 0/32 encapsulation aal5snap ! bundle-enable dsl operating-mode auto bridge-group 1 hold-queue 224 in ! interface FastEthernet0/0 no ip address no cdp enable bridge-group 1 interface FastEthernet0/1 description Connected to private network ip address 192.168.1.1 255.255.255.0 ip nat inside ! interface BVI1 ip address ###.###.###.### 255.255.255.248 ip access-group 100 in ip nat outside ! ! ip nat inside source list 1 interface BVI1 overload ! bridge 1 protocol ieee bridge 1 route ip Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=41786t=41713 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
WIC-1ADSL, Qwest DSL [7:41713]
Anybody out there setup a WIC-1ADSL with Qwest DSL in Bridging mode. I've got a Cisco 2621 and want to bridge the ADSL connection with fa0/0 (and NAT fa0/1). I'm able to get the ATM session up, but can't get IP traffic to flow. Of the configs at: http://www.cisco.com/warp/public/794/ the one at: http://www.cisco.com/warp/public/794/wicadsl_rfc_6400irb.html looks like it is close to what I want, but the config as listed doesn't work. (Can't put the same IP address on two different interfaces.) Any thoughts... Matt Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=41713t=41713 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: 4006 Power Supplies [7:41257]
I can add this.In the past year I have replaced 3 power supplies on 3 different 4006's. I would probably vote to have the extra one's in. HTH ms --- x wrote: Jeff, We just bought a Cisco 4006 switch. Our reseller and our Cisco rep both told us we need two power supplies to run it and one for redundancy. They both went on to say the power supply is the first thing to go. They sold me on it so I got all three power supplies. I got the switch a few weeks ago and I threw in the two 10/100 blades and the extra power supply. I unplugged one power supply and it still seemed fine. I decide to unplug another and leave only one running just to see if it would die. It ran for 30 minutes until I decided to plug it back in, keep in mind I didn't have anything attached at the time. I am guessing if you really wanted to you could get away with one, but when your spending that much(think it was around $14k to $15k) an extra $600 or so to protect your investment is no big deal. I also like the fact that if two powersupplies die it will still probably run and I can take my time replacing them. A good night's sleep is worth $600 to me. --- Jeffrey Reed wrote: Im trying to understand power redundancy in the Cisco 4006 switch. Reading through the online information, Cisco seems to imply you must have at least two power supplies up and running at all times. The 3rd power supply provides redundancy. Other vendors allow you to run at least a partially populated chassis on one power supply. If I have a 4006 with SUPII and one 48-port blade, do I really need three power supplies? Anyone have experience with 4006s and power supplies? Thanks!! Jeffrey Reed Classic Networking, Inc. Cell 717-805-5536 Office 717-737-8586 FAX 717-737-0290 [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Tax Center - online filing with TurboTax http://taxes.yahoo.com/ [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Tax Center - online filing with TurboTax http://taxes.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=41295t=41257 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Home Network [7:38818]
Go buy a cheap DSl router from one of those chain stores. You can get one for $100.00 or so. It will do PPoE and simple NAT. Then just put your routers behind them. Matthew Meiers, MCSA, MCSA, CCNA, CCDA Senior Systems Engineer -- Original Message -- From: James Gruggett Reply-To: James Gruggett Date: Tue, 19 Mar 2002 11:45:48 -0500 Hello everyone, I am in the process of setting up a home lab and I have a few questions. I will be running 2000 advanced server with various clients, I have a 1900, 2900 series switches and two 2501 routers. My first question is how can I provide internet access to all my clients ( will I have to use a proxy server for my clients) I have DSL ( internal PCI modem) which I guess I will run on my 2000 server. Also, how could I add in my routers? Thanks in advance -- James E. Gruggett MCSE Network Administrator Fedex Services 901-263-7595 [GroupStudy.com removed an attachment of type text/x-vcard which had a name of james.gruggett.vcf] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38827t=38818 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Whats the difference between Classful Classless??? [7:38856]
Hi Group, Im really struggling to understand the requirement in using the ip classless command when you are configuring a default route. I noticed that RIP 2 is a classless protocol RIP ver 1 is a classfull. Can anyone help me understand what the difference is (in simple terms!!) as i want to move on with my studies though im sure this is something thats going to come up again Cheers Matt Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38856t=38856 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Whats the difference between Classful Classless??? [7:38874]
Thanks Group, i appreciated that.. Matt Saunders wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi Group, Im really struggling to understand the requirement in using the ip classless command when you are configuring a default route. I noticed that RIP 2 is a classless protocol RIP ver 1 is a classfull. Can anyone help me understand what the difference is (in simple terms!!) as i want to move on with my studies though im sure this is something thats going to come up again Cheers Matt Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=38874t=38874 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: BCRAN question [7:37481]
when I took the exam I had several questions on ISDN and alot on x.25, I did receive a couple on 700 series but not to many. -Original Message- From: John McCartney To: [EMAIL PROTECTED] Sent: 3/6/2002 5:07 PM Subject: BCRAN question [7:37481] I'd like to ask those that have passed the BCRAN was there a lot of ??'s on the 700 series? I'm reading it an its very dry and I'm trying to decide if I really need to focus on this aspect or focus on other areas. Any info is appreciated, don't break the NDA Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=37487t=37481 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Setting up Catalyst 6500 as a Layer 2 switch [7:37177]
I'm trying to setup a Cat 6500 running IOS 12.1 (c6sup22-dsv-mz.121-8a.E5) as a layer two switch and I'm running into some issues. I have a group of ports all on the same vlan, with switchport set to enable them as layer 2 switch ports. Directed IP traffic flows fine, but broadcast traffic is not flowing between the ports. The short story of the problem. In this test environment I have 5 NT servers plugged into the Cat 6500 and they can't see each other view Network Neighborhood. My current goal is to just get this switch to act like your basic unmanaged switch (I'll work on the more interesting settings after I get this basic functionality working.) Any ideas what I might be missing? Matt ! Example of the current configuration: interface FastEthernet2/1 no ip address switchport ! interface FastEthernet2/2 no ip address switchport ! interface Vlan1 ip address 192.168.0.1 255.255.255.0 no ip route-cache cef no ip mroute-cache Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=37177t=37177 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Setting up Catalyst 6500 as a Layer 2 switch [7:37177]
I am setting this up in VLAN 1. So the vlan was already setup in the VLAN database. I do have the ports in question set to switchport mode access. All of the ports are in the same vlan. Matt -- Author: Larry Letterman (---.cisco.com) Date: 03-04-02 15:21 Hi, Have you set the vlan in Vlan Database mode ? Have you set the ports in question to switchport mode access ? Have the ports in question been set to the vlan you want them to be in ? interface FastEthernet5/35 description to Hop-1st floor no ip address udld enable switchport switchport access vlan 171 switchport mode access switchport nonegotiate Larry Letterman Cisco Systems [EMAIL PROTECTED] [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=37197t=37177 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Time based ACL on PIX? [7:37198]
Hi all- I sent this out earlier but it didn't seem to post?? Anyway...I was wondering if it is possible to have services behind a PIX restricted to time?? Kinda like how you can with a Checkpoint. Initially I was thinking this was not possible as I have conduit based configurations on all the PIX's I maintainand am unaware of any such option on a conduit. But then I saw the time-range option for an extended ACL. So, my question: Can this be used on a PIX to limit access to a service to say 1 ipand only between certain hours? Has anyone does this...or is it even possible? I hope this makes sense. thanks, matt __ Do You Yahoo!? Yahoo! Sports - sign up for Fantasy Baseball http://sports.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=37198t=37198 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Timed ACL on PIX? [7:37152]
Hello all- I was wondering if it is possible to have time restricted ACL's on a PIX...similiar to what you can do on a Checkpoint? Something that can restrict access to services depending on what time it is. My initial thoughts were NO...as we use conduits on our PIX fleet and I am unaware of any such conduit based command...but then I started looking and noticed the time-range command and am wondering if it is possible to use this feature on an ACL based PIX configuration? Any help is appreciated, thanks - matt __ Do You Yahoo!? Yahoo! Sports - sign up for Fantasy Baseball http://sports.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=37152t=37152 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: ISP Question [7:37006]
I'm in -Original Message- From: Craig Columbus To: [EMAIL PROTECTED] Sent: 3/3/2002 5:05 PM Subject: Re: ISP Question [7:37006] Ok, I'll bite... Don't start buying equipment yet. The technical component of an ISP is only one very small part of a big picture. If you're seriously thinking about starting an ISP, you first need to write a business plan that delineates your idea, your potential market, your competition, your management team, your organizational structure, your cashflow analysis, your initial funding, and your exit strategy. This includes a full and honest SWOT (strengths, weaknesses, opportunities, and threats) analysis. Once you've refined your plan, show it to people who know a lot more about running a business than you do. Go visit SCORE (look them up in the phone book) and be prepared to rewrite everything you've written. Once you've got a final product, then you're going to need funding. Remember, you need to account for more than the technical equipment. You'll have to consider rents, leases, insurance, utilities, payroll, taxes, etc. Once you've got the funding, you can bring on qualified management and engineers (read experienced in this field) and let them decide on the particular equipment you'll need. If this sounds like too much to tackle, then you're not ready to run your own business. On the other hand, if you're financially well off (rich) and are determined to go forward anyway, I'll be glad to walk you down the path for a fee. ;-) Good luck, Craig At 02:35 PM 3/1/2002 -0500, you wrote: Does anyone have a list of equipment for a company to become and ISP? I also want to buy a class of IP addresses and host them myself. Is there a link on Cisco to help someone like myself get started. Any help on this topic would be appreciated. I really don't know where to start Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=37111t=37006 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
insufficent memory on a new 1603R, Help!!!!! [7:37082]
Hi all, Ive just recently brought a Cisco 1603R which came with a 4Mb Flash Card 8Mb of Ram and im desperate to connect it to my other router (2503) which is running IOS (tm) 2500 Software (C2500-D-L), Version 12.0(9a) so i can practise some commands etc. When i boot the 1603R i get the following:- System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1) Copyright (c) 1999 by cisco Systems, Inc. Simm with parity detected, ignoring onboard DRAM System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1) Copyright (c) 1999 by cisco Systems, Inc. C1600 platform with 8192 Kbytes of main memory program load complete, entry point: 0x2005000, size: 0x2e4e0d Self decompressing the image : # ### [OK] Cisco Internetwork Operating System Software IOS (tm) 1600 Software (C1600-NY-M), Version 12.1(6), RELEASE SOFTWARE (fc1) Copyright (c) 1986-2000 by cisco Systems, Inc. Compiled Wed 27-Dec-00 14:24 by kellythw Image text-base: 0x02005000, data-base: 0x0260D624 cisco 1603 (68360) processor (revision C) with 7680K/512K bytes of memory. Processor board ID 26436386, with hardware revision 0004 Bridging software. X.25 software, Version 3.0.0. Basic Rate ISDN software, Version 1.1. 1 Ethernet/IEEE 802.3 interface(s) 1 Serial(sync/async) network interface(s) 1 ISDN Basic Rate interface(s) System/IO memory with parity disabled 8192K bytes of DRAM onboard System running from RAM 7K bytes of non-volatile configuration memory. 4096K bytes of processor board PCMCIA flash (Read/Write) SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE! On the side of the flash card it says Version: 12.0(14), Image: c1600-y-mz.120-14, Filename x00028c4. I gather the image is run from RAM and ive looked at the cisco website which says that the above image is compatible with the memory i have got though it seems to me that the router is loading something different. Im sure i must be missing something here and any help would be greatfully received. Regards Matt (UK) Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=37082t=37082 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: insufficent memory on a new 1603R, Help!!!!! [7:37082]
Hi ME I will have a look down the local pc store to find some 72pin 16Mb Simm Module. Thanks for the info.. ME wrote in message news:[EMAIL PROTECTED]; The 1600's use old 72pin pc simms. Find one 16mb or less and your good to go. Matt Saunders wrote in message news:[EMAIL PROTECTED]; Hi all, Ive just recently brought a Cisco 1603R which came with a 4Mb Flash Card 8Mb of Ram and im desperate to connect it to my other router (2503) which is running IOS (tm) 2500 Software (C2500-D-L), Version 12.0(9a) so i can practise some commands etc. When i boot the 1603R i get the following:- System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1) Copyright (c) 1999 by cisco Systems, Inc. Simm with parity detected, ignoring onboard DRAM System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1) Copyright (c) 1999 by cisco Systems, Inc. C1600 platform with 8192 Kbytes of main memory program load complete, entry point: 0x2005000, size: 0x2e4e0d Self decompressing the image : # ### [OK] Cisco Internetwork Operating System Software IOS (tm) 1600 Software (C1600-NY-M), Version 12.1(6), RELEASE SOFTWARE (fc1) Copyright (c) 1986-2000 by cisco Systems, Inc. Compiled Wed 27-Dec-00 14:24 by kellythw Image text-base: 0x02005000, data-base: 0x0260D624 cisco 1603 (68360) processor (revision C) with 7680K/512K bytes of memory. Processor board ID 26436386, with hardware revision 0004 Bridging software. X.25 software, Version 3.0.0. Basic Rate ISDN software, Version 1.1. 1 Ethernet/IEEE 802.3 interface(s) 1 Serial(sync/async) network interface(s) 1 ISDN Basic Rate interface(s) System/IO memory with parity disabled 8192K bytes of DRAM onboard System running from RAM 7K bytes of non-volatile configuration memory. 4096K bytes of processor board PCMCIA flash (Read/Write) SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE! On the side of the flash card it says Version: 12.0(14), Image: c1600-y-mz.120-14, Filename x00028c4. I gather the image is run from RAM and ive looked at the cisco website which says that the above image is compatible with the memory i have got though it seems to me that the router is loading something different. Im sure i must be missing something here and any help would be greatfully received. Regards Matt (UK) Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=37086t=37082 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: TWO ISP AND ONE FAILURE [7:36371]
2500 is BGP king -Original Message- From: Hire, Ejay [mailto:[EMAIL PROTECTED]] Sent: Monday, February 25, 2002 1:27 PM To: [EMAIL PROTECTED] Subject: RE: TWO ISP AND ONE FAILURE [7:36371] Do not say that a 2500 will not work for BGP. It will work just fine for a default-only or partial-routes setup, and I'm sure more than one member of this group has set it up. -ejay -Original Message- From: Patrick Ramsey [mailto:[EMAIL PROTECTED]] Sent: Monday, February 25, 2002 11:05 AM To: [EMAIL PROTECTED] Subject: Re: TWO ISP AND ONE FAILURE [7:36371] chances are bgp will not be availablefirst..he has to have the address space...second...if he didn't plan for it before hand, he's probably got a couple'a 2500's or 2600's Try running bgp on a 2500. (unless of course he uses the same isp for both connections and they work with him on setting up redundancy) But at that point he still would not have his own asn for bgp... -Patrick sam sneed 02/25/02 10:46AM You would want to use both HSRP and BGP in this case. HSRP will solve the problem of changing the default gateway on the clients when a link fails. BGP will be used for fault tolerance at the ISP side. Here is a sample doc I got form the cisco site: http://www.v-man.net/support/pdf/hsrp_bgp.pdf Yassel Omar Izquierdo Souchay wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hello i have a frecuent porblem with one of my isp, i have two cisco routers and each one to different isp. Frequentily i have to change the gateway of one of my servers, because one isp is failure. I want to know if with one of BGP, OSPF, RIP, NAT or other protocol i could do the change automatically to the other active isp. It happening me right now. And when i have to do that i have to reset one of my servers.. :S. Is a costs operatrion its a mail server. So if somebody knows how to resolve between routers with different isp each one, how to route accross the other good gateway. Thnx in advance Yassl Confidentiality Disclaimer This email and any files transmitted with it may contain confidential and /or proprietary information in the possession of WellStar Health System, Inc. (WellStar) and is intended only for the individual or entity to whom addressed. This email may contain information that is held to be privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, you are hereby notified that any unauthorized access, dissemination, distribution or copying of any information from this email is strictly prohibited, and may subject you to criminal and/or civil liability. If you have received this email in error, please notify the sender by reply email and then delete this email and its attachments from your computer. Thank you. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=36417t=36371 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Problem telnetting into router with NAT enabled [7:35634]
Try this command: ip nat inside source static tcp 192.168.1.1 23 209.xxx.xxx.xxx 23 extendable This will map the telnet port of the outside IP address to the inside, should work for you, let us know. ~I am having a problem telnetting into the router from the outside ~when I have NAT on the router. Once I take the ip nat outside command ~off the outside interface, I can telnet into the router from the ~outside. I can ping the NAT router regardless of whether ip nat outside ~is on the interface or not. Note that I do, of course, have the vty 0 4 ~passworded. Here's the config (edited for bandwidth purposes): ~ ~interface Ethernet0 ~ ip address 209.xxx.xxx.xxx 255.255.255.0 ~ ip nat outside ~! ~interface Serial0 ~ ip address 192.168.1.1 255.255.255.252 ~ ip nat inside ~ encapsulation ppp ~clockrate 200 ~! ~ip nat inside source list 101 interface Ethernet0 overload ~! ~access-list 101 permit ip any any ~ip classless ~! ~vty 0 4 ~password hrmm ~login ~! ~end ~ ~ Packets are coming into the router from the telnetting host, and NAT ~tries to do a translation on it, but fails, I think..? NOTE in ~the debug ~output: 209.xxx.xxx.xxx is the external router ip address and ~216.xxx.xxx.xxx is where I'm telnetting from. This is output from a ~debug ip nat detailed and debug ip nat port combined: ~ ~04:09:59: NAT - SYSTEM PORT for 209.xxx.xxx.xxx: allocated port 0, ~refcount 55, localport -1, localaddr 0.0.0.0, flags 1, syscount 55 ~04:09:59: NAT - SYSTEM PORT for 209.xxx.xxx.xxx: allocated port 23, ~refcount 2, localport -1, localaddr 0.0.0.0, flags 1, syscount 2 ~04:09:59: NAT: Allocated Port for 209.xxx.xxx.xxx - 209.xxx.xxx.xxx: ~wanted 23 got 2 ~04:09:59: NAT: i: tcp (209.xxx.xxx.xxx, 23) - (216.xxx.xxx.xxx, 3012) ~[0] ~04:09:59: NAT: TCP s=23-2, d=3012 ~04:09:59: NAT: o: tcp (216.xxx.xxx.xxx, 3012) - (209.xxx.xxx.xxx, 2) ~[51] ~04:09:59: NAT: TCP s=3012, d=2-23 ~04:09:59: NAT: updated sys port: port 23, refcount 1, localport -1, ~localaddr 0.0.0.0, flags 1, syscount 1 ~04:11:08: NAT: expiring 209.xxx.xxx.xxx (209.xxx.xxx.xxx) tcp 2 (23) ~ ~ Any ideas? ~ ~Kind Regards, ~Tim Booth ~MCDBA, CCNP, CCDP, CCIE written ~- ~Those who would give up essential liberty to purchase a little ~temporary ~safety deserve neither liberty nor safety. ~Benjamin Franklin, 1759 ~ ~ ~ ~ ~Report misconduct ~and Nondisclosure violations to [EMAIL PROTECTED] ~ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=35639t=35634 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Ethernet or FastEthernet [7:35245]
In the book that I read it says that you can only use fast ethernet or gig ethernet -Original Message- From: Colin [mailto:[EMAIL PROTECTED]] Sent: Tuesday, February 12, 2002 8:20 PM To: [EMAIL PROTECTED] Subject: Ethernet or FastEthernet [7:35245] Hello I have been doing some reading on VLANs and Trunking and have read conflicting information. Can you use a 10Mbs Ethernet interface when running ISL or 801.1q or does the interface have to be FastEthernet? Some books/articles I've read say you must use at least a FastEthernet interface and others say you can use an Ethernet interface. Note: this is for my CCNP lab studies, not a production network. Thanks Colin Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=35277t=35245 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Loopback IP masking - 32 or 24 bits? or? [7:32345]
you could also do a FLRP or as known in the industry as a Full Loopback Reverse Path -Original Message- From: Lupi, Guy Sent: Thursday, January 17, 2002 4:16 PM To: [EMAIL PROTECTED] Subject: RE: Loopback IP masking - 32 or 24 bits? or? [7:32345] Well, you could use part of the loopback subnet for a nat pool if your loopback is a public IP address, that is one reason you may want more than a /32 on the interface. Just throwing things out there. -Original Message- From: Walker, Jim [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 17, 2002 3:42 PM To: [EMAIL PROTECTED] Subject: RE: Loopback IP masking - 32 or 24 bits? or? [7:32345] Your friend is right. Why would you use anything other than a /32 bit mask on a virtual interface? You are not going to route using the loopback address are you? Jim Walker Master Network Engineer Partners HealthCare System, Inc. Information Systems / Technical Services Operations Tel. (617) 732-8803 Fax (617) 264-5130 This e-mail message and any attachments are confidential and may be privileged. If you are not the intended recipient, please notify me immediately by replying to this message and please destroy all copies of this message and attachments. Thank you. -Original Message- From: Joshua Dughi [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 17, 2002 3:23 PM To: [EMAIL PROTECTED] Subject: Loopback IP masking - 32 or 24 bits? or? [7:32345] Hi, all; I recently started considering why I might want to have a 32-bit mask for my loopbacks as opposed to some other scheme - for instance using the regularly documented 24-bit mask on a loopback. I am speaking of course, of: Interface Loopback0 IP Address 10.0.0.1 255.255.255.0 versus approaching this matter in this fashion: Interface Loopback0 IP Address 10.0.0.1 255.255.255.255 So, my questions are: 1) Has any one here seen a detailed discussion of this matter? Can you provide me a link to it? 2) Based on what a friend of mine feels, his view is that there is never any benefit to having a 24-bit, or 28, or 29-bit mask on a loopback. In his view, loopbacks will always need to be, very logically, used with 32-bit masks. Can anyone please shed some light on this matter? Thank you. Joshua Dughi Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=32364t=32345 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: full-duplex Ethernet cable? [7:31643]
I can see you are a stable person -Original Message- From: Patrick Ramsey [mailto:[EMAIL PROTECTED]] Sent: Friday, January 11, 2002 1:59 PM To: [EMAIL PROTECTED] Subject: Re: full-duplex Ethernet cable? [7:31643] I don't know why it irritates me so much...it's really crazy but I can't stand hearing people say NIC Card NIC...NICjust say it!...grin... Allen May 01/11/02 01:36PM Yep...and PIN Number, ACL List, etc. I used to bug instructors by referring to them as Network Interface Card Card's to point out what NIC Card really was ;) Allen - Original Message - From: Patrick Ramsey To: Sent: Friday, January 11, 2002 11:54 AM Subject: RE: full-duplex Ethernet cable? [7:31643] Is NIC Card kinda like a FAT Table? : p Daniel Cotts 01/11/02 12:34PM Unshielded Twisted Pair (UTP) uses two pair (four wires) on pins 12 and 36 of an RJ-45 plug. Whether it runs as full or half duplex is determined by the connected equipment - NIC card, Hub, Switch, router, etc. If Ethernet is running over coax cable then it is limited to half duplex. -Original Message- From: mlh [mailto:[EMAIL PROTECTED]] Sent: Friday, January 11, 2002 10:56 AM To: [EMAIL PROTECTED] Subject: full-duplex Ethernet cable? [7:31643] Hi, there, how many pairs of two-twisted cable are used for full-duplex Ethernet ? what is the difference between full- and half- duplex cable? Thank you in advance. Regrads, mlh Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=31664t=31643 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Double NAT with PIX [7:31294]
You should be able to have them point to a non-overlapping subnet and NAT them back to the desired 10.0.0.0/16. Usually when I have done this in the past, the customer was coming into a DMZ on my end and I performed that there. I don't see why you wouldn't be able to do that here? ms --- Ali, Abbas wrote: I have a 525 PIX and running normal configuration. Inside network is in 10.0.0.0/16 segment and doing NAT with public address. Here is the situation. I have a client where I need to have an access through my PIX with VPN. The client is using VPN Concentrator and also has 10.0.0.0/16 for their inside network. They sent me the VPN Client CD that I installed in my laptop and gained access to their network through outside segment meaning I attached my PC between my PIX's E0 and Internet router in otherwords bypassed PIX and configured my PC with public address. Is it possible to connect to their network with me being attached to my Internal network. The question is since both the networks mine and theirs are on the same LAN Segment how is it possible? Thanks, [EMAIL PROTECTED] __ Do You Yahoo!? Send FREE video emails in Yahoo! Mail! http://promo.yahoo.com/videomail/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=31298t=31294 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: 3500xl [7:31149]
yes, on the vty lines to restrict telnet access to the switch. ms --- James, Eric L. wrote: Anyone ever setup access-lists on a 3500 switch? thanks [EMAIL PROTECTED] __ Do You Yahoo!? Send FREE video emails in Yahoo! Mail! http://promo.yahoo.com/videomail/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=31171t=31149 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: How to Get Router IOS Back [7:31168]
This link should help you: http://www.cisco.com/warp/public/130/recovery_c2600.html be careful of the word wrap. HTH, ms --- Hasan Abbas wrote: I have got a problem with Cisco IOS , I have Cisco 2620 Router and uploaded an IP Plus software via TFTP (copy tftp flash) After Rebooting it does initialized its Voice Ports but not Ethernet Ports or EtherNet Controllers. Since its Ethernet is also not Responding How can I get My IOS back to its flash. Does xmodem -r will work Can anybody will guide me how to get router back to working when somebody erased his flash and nvram and load IOS to flash using Rommon Rgds, Hasan - Do You Yahoo!? Send FREE video emails in Yahoo! Mail. [EMAIL PROTECTED] __ Do You Yahoo!? Send FREE video emails in Yahoo! Mail! http://promo.yahoo.com/videomail/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=31179t=31168 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Frame Relay Question [7:31210]
So...I am looking at some frame links that a co-worker brought up not long ago. I issue a show frame-relay pvc command and notice that there are 3 dlci's being seen by the router yet there are only 2 circuits. The 3rd unknown dlci is listed as being unused. So, I look through the config some more and confirm that the 3rd dlci is not defined anywhere in the config. I am guessing my router is learning this dlci from the providers frame switch?? But why? Feel free to correct me if I am wrong...and thanks in advance for the help. matt __ Do You Yahoo!? Send FREE video emails in Yahoo! Mail! http://promo.yahoo.com/videomail/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=31210t=31210 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Frame Relay Question [7:31210]
Thanks to everyone for their replies. As it turns outseems to be a screw up on the provider's part. Thanks everyone for keeping me sane. matt --- [EMAIL PROTECTED] wrote: Because your provider has defined the PVC on their switch. Why? A few possibilities spring to mind... a) your co-worker put in an incorrect or ambiguous order and the provider thought you wanted the third PVC b) your provider accidentally mis-configured the switch, and some other organisation may be currently asking them why they can't see the PVC that they ordered. c) somebody else in your organisation ordered the third PVC d) it's an old PVC and somebody forgot to cancel it when it was de-configured on the router and no longer required, or the provider cancelled it but forgot to de-configure it from the switch. e) any number of similar reasons The relative likelihood of these depends partly on your organisation - how many different teams have their fingers in the pie, how complex the network is (i.e. how easy it is to accidentally mis-type a request), and partly on the provider. If you're sure that the third PVC isn't required, chase it up with your provider - they should be able to say when (if) it was ordered. JMcL - Forwarded by Jenny Mcleod/NSO/CSDA on 08/01/2002 09:57 am - matt cc: Sent by: Subject: Frame Relay Question [7:31210] nobody@groups tudy.com 08/01/2002 08:52 am Please respond to matt So...I am looking at some frame links that a co-worker brought up not long ago. I issue a show frame-relay pvc command and notice that there are 3 dlci's being seen by the router yet there are only 2 circuits. The 3rd unknown dlci is listed as being unused. So, I look through the config some more and confirm that the 3rd dlci is not defined anywhere in the config. I am guessing my router is learning this dlci from the providers frame switch?? But why? Feel free to correct me if I am wrong...and thanks in advance for the help. matt __ Do You Yahoo!? Send FREE video emails in Yahoo! Mail! http://promo.yahoo.com/videomail/ [EMAIL PROTECTED] __ Do You Yahoo!? Send FREE video emails in Yahoo! Mail! http://promo.yahoo.com/videomail/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=31224t=31210 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Aeropoint - Cisco CSS 11000 Content switch [7:30711]
F5 is not a bad box...I can admit that. But I still think that alteon outperforms it. see attached PDF: just my opinion, ms --- Scott M. Trieste wrote: Brant, Great call on the BigIP. I am a huge fan of F5's product line, and there BigIP -HA box is sooo sweet. If anyone would like some heads up on these boxes, try www.f5networks.com or feel free to email me. Thanks. -Scott M. Trieste Brant Stevens wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Personally, I hate the CSS... many issues, especially if you use it to distribute load for applications other than HTTP; SQL comes to mind... Not to mention that in my experience, Cisco support doesn't seem to know the box too well... I'm a big Foundry fan... BigIP is also a very solid product line... -Brant - Original Message - From: John Neiberger To: Sent: Wednesday, January 02, 2002 5:39 PM Subject: Re: Aeropoint - Cisco CSS 11000 Content switch [7:30711] We've got one of the original Arrowpoint CSS 100 switches and I love it. They're pretty easy to configure and very reliable. However, we're going to be redesigning that portion of our network and we're seriously considering moving to the competing product by F5. They have a new model that is just coming out called the Big IP 3000 that is exactly what we need. Pricey, but I've heard nothing but great things about them. As far as the Cisco stuff goes, I'm sure you'd be happy with it. I definitely love the one we have. HTH, John Byron 1/2/02 3:16:04 PM Hello- Can anyone share any successes stories and problem areas with the Cisco CSS 11000 Content Services Switch? We're about to begin a migration of dual Local Directors (supporting large ASP model web farm) moving to the CSS 11000. We're upgrading due to bugs and instability we've experienced with the LDs. Would very much appreciate any experiences with the CSS 11000 product. thx kindly.Byron _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com [EMAIL PROTECTED] __ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com [GroupStudy.com removed an attachment of type application/pdf which had a name of Tolly_FINAL.pdf] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=30826t=30711 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: OT - Firewall performance Comparisons - is it quitting time [7:30862]
The testing I did was specific to the scenario where I was having problems. That scenario involves a pair of 535's fronting a high traffic news web site. I took all kinds of samples and averaged the packet size distribution (web traffic=pretty small) so when I was working with Cisco we were able to have the smartbits generate streams simulating the same type traffic we were seeing in production. The findings were that the 535 will begin to show problems at around 400mbs. This can be slightly improved if you make sure to limit logging levels etc.. Another key thing to note is that we tested with 5.3.1 and 5.3.2 DO NOT USE 5.3.1 with a 535. There are many problems with that code and high traffic. When doing a show block you can see this by noticing that the size 16384 block will be at zero with any significant amount of traffic. Do a clear block and then show block...and you will see it will go right back down to zero. The 16384 block corresponds to the PIX-1GE-66 (66mhz)cards...and 5.3.2 allocates more resources for those cards. Another thing to note5.3.2 will still run out of blocks if you are running stateful. I have since turned that off...this was just prior to 9-11-01 and the site did rather well under a tremendous load of traffic. I could go on...but to sum it up -the 535 is like any firewall..performance is impacted directly by packet size -5.3.2 was what cisco recommended after this testing with 6.2 waiting to be released. -535 will hold it's own at 300+ mbs of web traffic. - the closer you get to 400mbs..the scarier it gets. hope this helps, ms ms --- Liz wrote: I would like to know about the 535's also curious if you have worked with the 525's at all. We just got two to replace some old 510's. Thanks, Liz matt shiite wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I don't know too much about the Nokia boxes, but have done quite a bit of work on Pix's. I witnessed the 515 fail at between 20-30 mbs (a documented bug). I found that to be very lame. Also, did quite a bit of testing with cisco on the PIX 535. If anyone cares to see when that thing failslet me know. You might be suprised :) ms --- Eric wrote: The Checkpoint/Nokia 330 runs IPSO as the OS on hardened freeBSD. These will actually run routing protocols too, i.e.., RIP, OSPF, IGRP, etc Nice GUI too...They do dominate their market segment. Eric - Original Message - From: Chuck Larrieu To: Sent: Monday, December 31, 2001 1:50 PM Subject: OT - Firewall performance Comparisons - is it quitting time [7:30576] I sure love slow days like today. I've discovered a whole new section on the company intranet - a group that does performance and acceptability testing for vendor equipment which we sell. So I'm looking over the firewall report - Cisco 515 versus several other things. I have never seen or heard this before, but according to this doc, Checkpoint on a Nokia 330 box outperformed the PIX 515 substantially. by about 20% in terms of throughput. I have always heard that PIX outperforms Checkpoint by a large margin. Maybe that was when compared to Checkpoint on a Windoze box? Interesting to see in the results was that the Cisco 1601 with IP firewall feature set outperformed the Cisco 2610 by a decent ( but not overwhelming ) margin. The PIX 515 looks to be about 50% faster than the 1601 and twice as fast as the 2610. The PIX 515 was about twice as fast, in terms of throughput, than the $500 Netscreen 5XP ( low end ) firewall Granted, the testbed was limited in that there were just a few stations on the inside trying to get to just a few stations on the outside. Traffic simulation was used for different types of traffic ( http, ftp, etc ) Granted there are other issues, such as scalability. Still, it sure looks to be an interesting year ahead, in the security products market. Happy New Year, everyone! Chuck [EMAIL PROTECTED] __ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com [EMAIL PROTECTED] __ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=30862t=30862 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Passive Interface Help [7:30648]
Are these routers directly connected? If so, that explains why you would still be able to ping. Did you try to use loopback interfaces and see if those routes are being announced? ms --- CCIEn2002 wrote: Thank you for the info. Now I am a little confused still on the passive interface. If it prevents routing updates from being sent out, why would one want a passive interface. From my understanding, a passive interface would not advertise is routing updates to its neighbor. If that is the case, I am perplexed on why I can ping a passive interface that is being advertised thru a routing protocol. In my case, my neighbor router is seeing an IGRP update for the Ethernet network. Why would you make the Ethernet passive if you can still ping it and see its routing update from a neighboring router via the show ip route ? This is where I get confused by the definition of passive. Any help..I am a rookie as you can see David - Original Message - From: cheekin To: ; Sent: Wednesday, January 02, 2002 4:43 AM Subject: Re: Passive Interface Help [7:30648] Hi, When you make the ethernet interface passive, it means no igrp updates will be sent out on the ethernet interface. It doesn't stop the serial interface from advertising network 12.0.0.0 . Which explains why you can still ping to the ethernet interface. If for some reason you do not want network 12.0.0.0 to be advertised, remove the network 12.0.0.0 statement or use distribute-list to filter out the route. Regards, cheekin - Original Message - From: To: Sent: Wednesday, January 02, 2002 15:03 Subject: Passive Interface Help [7:30648] Happy New Year!! I need a little help on what a passive interface is. From what I can gather, a passive interface does not advertise its route to its neighbor ? Now if that is the case, why can I still ping an interface that is set to passive. Please note: This is excluding directly connected routes. For example, I set my Cisco 2509 ethernet interface to passive. Why can I still ping the ethernet address from my neighboring router Cisco 4000 ? I am running IGRP. Why does the ethernet network show up in its routing table for my Cisco 4000. From poking around with the passive interface command it seems that I can not ping my ethernet address only if I set the Serial interfaces to passive also. This seems odd. I thought if I made an ethernet interface passive, I should not be able to ping it from a neighboring router or any other router since it is not being advertised. Below is a sample of me being able to ping serial 1 off my Cisco 2509 from my Cisco 4000. Serial 1 is not directly connected. Serial 1 is being advertised. Current configuration: ! version 12.0 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname Cisco2509 ! enable password router ! ip subnet-zero ipx routing 0010.7be8.22f4 ! ! ! ! ! interface Ethernet0 ip address 12.11.12.1 255.255.255.240 no ip directed-broadcast delay 1000 ! interface Serial0 ip address 172.16.18.1 255.255.255.240 no ip directed-broadcast no ip mroute-cache ipx network 3 no fair-queue clockrate 100 ! interface Serial1 ip address 172.17.18.2 255.255.255.240 no ip directed-broadcast clockrate 400 ! router igrp 1 passive-interface Ethernet0 passive-interface Serial0 passive-interface Serial1 offset-list 2 out 11000 Serial0 network 12.0.0.0 network 172.16.0.0 network 172.17.0.0 ! ip classless ! access-list 2 deny 12.11.12.1 ! ! ! ! ! line con 0 transport input none line 1 8 line aux 0 line vty 0 4 password cisco login ! end Cisco2509# Cisco_4000ping 172.17.18.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 172.17.18.1, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 120/120/124 ms Cisco_4000ping 12.11.12.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 12.11.12.1, timeout is 2 seconds: . Success rate is 0 percent (0/5) Cisco_4000 [EMAIL PROTECTED] __ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=30699t=30648 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: SSL Accelerators [7:30724]
Personnally I have used the Alteon series loadbalancers with their ISD ssl accelerator. I can't complain...they have worked like a champ. Just another option for ya :) ms --- Gaz wrote: Not providing many/any answers here I'm afraid - just asking more questions. Is SSL that suitable for caching? I would have thought that most SSL traffic would be unique (Session ID's/transaction info etc). That's not a cocky question, I really don't know. I suppose there will be static content within the SSL pages. I've used Intel SSL accelerators which seem to perform pretty well. We also do a fair bit of load balancing with Foundry Networks kit (Server Irons/Big Irons) and they're pretty nippy and pretty cheap compared to Cisco, and have the advantage that their CLI is very close to Cisco. I suppose it depends what scale you're doing it on. From what I've seen of the Cisco CSS (Arrowpoint kit) they seem to offer greater functionality/flexibility than Foundry, but not seen much of them working in anger yet. Be interesting to hear what Stratacache really mean by caching content in SSL-ready format. Gaz John Neiberger wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... We are looking at buying some new load balancing switches and new cache engines and somewhere in that mix we want to add SSL acceleration. One vendor that we're looking at sells load balancing switches with SSL acceleration built-in. Of course, they really like their way of doing this. The other vendor has a cache engine with SSL acceleration and they say there is a significant performance increase by caching content in SSL-ready format. Do any of you have any thoughts here? The first vendor is F5 and I really like the looks of their Big IP series. The second vendor is Stratacache and I really don't know much about them despite having talked to them about this. :-) Any tips? Thanks, John [EMAIL PROTECTED] __ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=30737t=30724 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: OT - Firewall performance Comparisons - is it quitting time [7:30590]
I don't know too much about the Nokia boxes, but have done quite a bit of work on Pix's. I witnessed the 515 fail at between 20-30 mbs (a documented bug). I found that to be very lame. Also, did quite a bit of testing with cisco on the PIX 535. If anyone cares to see when that thing failslet me know. You might be suprised :) ms --- Eric wrote: The Checkpoint/Nokia 330 runs IPSO as the OS on hardened freeBSD. These will actually run routing protocols too, i.e.., RIP, OSPF, IGRP, etc Nice GUI too...They do dominate their market segment. Eric - Original Message - From: Chuck Larrieu To: Sent: Monday, December 31, 2001 1:50 PM Subject: OT - Firewall performance Comparisons - is it quitting time [7:30576] I sure love slow days like today. I've discovered a whole new section on the company intranet - a group that does performance and acceptability testing for vendor equipment which we sell. So I'm looking over the firewall report - Cisco 515 versus several other things. I have never seen or heard this before, but according to this doc, Checkpoint on a Nokia 330 box outperformed the PIX 515 substantially. by about 20% in terms of throughput. I have always heard that PIX outperforms Checkpoint by a large margin. Maybe that was when compared to Checkpoint on a Windoze box? Interesting to see in the results was that the Cisco 1601 with IP firewall feature set outperformed the Cisco 2610 by a decent ( but not overwhelming ) margin. The PIX 515 looks to be about 50% faster than the 1601 and twice as fast as the 2610. The PIX 515 was about twice as fast, in terms of throughput, than the $500 Netscreen 5XP ( low end ) firewall Granted, the testbed was limited in that there were just a few stations on the inside trying to get to just a few stations on the outside. Traffic simulation was used for different types of traffic ( http, ftp, etc ) Granted there are other issues, such as scalability. Still, it sure looks to be an interesting year ahead, in the security products market. Happy New Year, everyone! Chuck [EMAIL PROTECTED] __ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=30590t=30590 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: New York Study Group [7:23580]
yes, lets start one, but no one who has the name GUY can be in it -Original Message- From: Philip Jache To: [EMAIL PROTECTED] Sent: 10/19/2001 8:24 PM Subject: RE: New York Study Group [7:23580] We could start one. Philip Jache Sports Illustrated 135 West 50th Street New York, NY 10020 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=23606t=23580 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Disable Telnet [7:23388]
yes -Original Message- From: Chamak [mailto:[EMAIL PROTECTED]] Sent: Thursday, October 18, 2001 1:11 PM To: [EMAIL PROTECTED] Subject: Disable Telnet [7:23388] can I diable the Telnet on my router or can I restrict IP that can telnet to the router ? Mukul Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=23397t=23388 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Jargon Dictionary [7:21964]
nice -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Thursday, October 04, 2001 12:13 AM To: [EMAIL PROTECTED] Subject: Re: Jargon Dictionary [7:21964] A magic number is any combination of wins by team x or losses by team y. Sorry I'm a baseball fan. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=22088t=21964 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: NAT pool timeout [7:21206]
On a cisco router you can set the lease time by going into config t, and then into the dhcp pool name and issue the command lease 0-365 days, I think the default lease time is 1 day. -Original Message- From: Quadri, Habeeb [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 26, 2001 4:05 PM To: [EMAIL PROTECTED] Subject: NAT pool timeout [7:21206] Hi, I am running out of addresses in nat pool. I understand that after certain time period of inactivity addresses are timed out and return to the pool. I would like to know, what is the default timeout for inactive addresses in pool and how to reduce/manage timeout after a certain period of inactivity. I researched CCO but things are not clear!!. Any comments are appreciated. Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=21211t=21206 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: load balance between 4 T1s [7:15692]
are you saying that CEF is buggy? -Original Message- From: Scott M. Trieste [mailto:[EMAIL PROTECTED]] Sent: Monday, August 13, 2001 2:11 PM To: [EMAIL PROTECTED] Subject: Re: load balance between 4 T1s [7:15692] If your running this implementation with an ISP, chances are they won't use a technology that has proved buggy: CEF. My recommendation would be to use the load balancing feature of such IGP routing protocols like OSPF or EIGRP. khramov wrote in message news:[EMAIL PROTECTED]... I am getting 4 T1s but I think I will have only one IP address. How can I load balance 1IP between 4 T1s. thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=15908t=15692 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Keep losing Cisco 3640 startup config [7:14376]
make sure the config register is set to 0x2102 and if not go into config mode and type config-register 0x2102 and do a sh ver and at the bottom it will tell you where the next boot will come from -Original Message- From: W. Alan Robertson [mailto:[EMAIL PROTECTED]] Sent: Tuesday, July 31, 2001 1:11 PM To: [EMAIL PROTECTED] Subject: Re: Keep losing Cisco 3640 startup config [7:14376] I would begin by checking my config register... It sounds like it may be set to bypass the stored config. - Original Message - From: kwock99 To: Sent: Tuesday, July 31, 2001 12:30 PM Subject: Keep losing Cisco 3640 startup config [7:14376] Hi, I have a Cisco 3640 router and found that everytime I power down the router, the startup config is missing and restart the setup. I have copy run start many times. Anyone has the idea to fix it? Best regards Francis Tsui [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=14381t=14376 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: OSPF and Access-lists [7:14229]
ospf uses 224.0.0.5 and 224.0.0.6 -Original Message- From: Dennis H [mailto:[EMAIL PROTECTED]] Sent: Monday, July 30, 2001 4:03 PM To: [EMAIL PROTECTED] Subject: Re: OSPF and Access-lists [7:14229] Assuming you do not have any permit statements it would be dropped. As far as I know OSPF hello's use multicast addressing. If I remember right it uses 224.0.0.10 but I could be wrong... Dennis Nabil Fares wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Greetings, Just an insanity check..If I have deny any any access list on an interface, would the ospf hello drop? Thanks, Nabil Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=14253t=14229 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Dual T1 Bonding? [7:13914]
Hello, We have a Cisco2621 with two T1 going to the same place. Does anyone have a link to some IOS examples that would allow them to be bonded together? \ We would like the ability to download at the combined T1 speed of 3 mb. Currently we seem to max out at only 1 T1 speed. I did searches at Cisco on bonding, but could not come up with anything. Thank you. Matt Goodhue Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=13914t=13914 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Dual T1 Bonding? [7:13914]
interface Multilink1 ip address x.x.x.x x.x.x.x no cdp enable ppp multilink multilink-group 1 interface Serial0 no ip address encapsulation ppp ip mroute-cache no fair-queue ppp multilink multilink-group 1 interface Serial1 no ip address encapsulation ppp ip mroute-cache no fair-queue ppp multilink multilink-group 1 -Original Message- From: Howard C. Berkowitz [mailto:[EMAIL PROTECTED]] Sent: Thursday, July 26, 2001 7:14 PM To: [EMAIL PROTECTED] Subject: Re: Dual T1 Bonding? [7:13914] Hello, We have a Cisco2621 with two T1 going to the same place. Does anyone have a link to some IOS examples that would allow them to be bonded together? \ We would like the ability to download at the combined T1 speed of 3 mb. Currently we seem to max out at only 1 T1 speed. I did searches at Cisco on bonding, but could not come up with anything. Thank you. Matt Goodhue Bonding, to be specific, is a layer 1 technique intended for videoconferencing, and is not supported by routers. It's actually BONDING, an acronym for something that escapes me. To do it on the router, look at multilink PPP for a layer 2 solution, and also per-packet and per-flow load balancing at layer 3. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=13917t=13914 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Blocking the unsed IP [7:13514]
yes -Original Message- From: Rajeev Karamchand [mailto:[EMAIL PROTECTED]] Sent: Tuesday, July 24, 2001 11:36 AM To: [EMAIL PROTECTED] Subject: Blocking the unsed IP [7:13514] All Is there a way to block all unused external IP = Rajeev Karamchand MCSE,MCSE+I,MCDBA,CCNA __ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=13521t=13514 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
VoFR [7:13434]
Hey, I am having trouble with VoFR. I have a small lab setup with a 2600 as a frame switch and two routers (2600 and 3600) with FXS ports. I can get VoIP to work just fine. For VoFR I changed the dial-peer to VoFR and I changed the destination pattern to use the serial interface and the local DLCI. Other than that the configs are the same (just a plain Jane VoIP config). Is there something obvious that I am missing? dial-peer voice 100 vofr port 1/0/0 destination-pattern 5000 session target serial0/0 120 Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=13434t=13434 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: VoFR [7:13434]
Oops, my bad. I got in a hurry when I was posting this. Here is what it looks like. Sorry about that. dial-peer voice 5000 vofr destination-pattern 5000 session target serial0/0 120 dial-peer voice 101 pots port 1/0/1 destination-pattern 1001 Matt Tony Medeiros wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I am suprised that the IOS let you put a port statment under a VOFR dial peer. Those are only for POTS peers. Take it out and it might work. Tony M. #6172 - Original Message - From: Matt To: Sent: Monday, July 23, 2001 5:05 PM Subject: VoFR [7:13434] Hey, I am having trouble with VoFR. I have a small lab setup with a 2600 as a frame switch and two routers (2600 and 3600) with FXS ports. I can get VoIP to work just fine. For VoFR I changed the dial-peer to VoFR and I changed the destination pattern to use the serial interface and the local DLCI. Other than that the configs are the same (just a plain Jane VoIP config). Is there something obvious that I am missing? dial-peer voice 100 vofr port 1/0/0 destination-pattern 5000 session target serial0/0 120 Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=13440t=13434 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ptcm0600 [7:13425]
Hey, about two hours ago I got a message from someone saying that an email exactly like this one is going around and the attachment is a worm. Watch out!!! Matt wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi! How are you? I send you this file in order to have your advice See you later. Thanks [GroupStudy.com removed an attachment of type application/mixed which had a name of ptcm0600.xls.bat] [GroupStudy.com removed a section which didn't have a content-type header] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=13442t=13425 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Multiple OSPF areas on the same router [7:13108]
are you running full bgp routes on the router that you want to put 6 areas on. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Friday, July 20, 2001 1:55 PM To: [EMAIL PROTECTED] Subject: Re: Multiple OSPF areas on the same router [7:13108] Guy, A router which belongs to multiple OSPF area's is called an Area Border Router (ABR). All ABR's must belong to area 0 (The OSPF Backbone area) in addition to any other areas they belong to. For each area a router is a member of, it must store all of the LSA's for that area, and participate in the Dykstra SPF calculations for that area. So, the more area's a router is a member of, the higher the CPU and memory load on the router. Recommendations for the maximum number of areas a router should belong to vary. It isn't an exact science. The number of routers, the number of circuits (networks), and the stability of the circuits in each area will affect the max number of areas you can support on a single ABR. That said, 6 areas plus area 0 on a single router is probably to high. 3-4 areas plus area 0 is generally a good rule of thumb. Again, keep in mind there are many variables which affect how many areas a router can support and so each situation must be considered individually. ---Jon Lupi, Guy @groupstudy.com on 07/20/2001 01:29:41 PM Please respond to Lupi, Guy Sent by: [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject: Multiple OSPF areas on the same router [7:13108] Lets say you have a router with 6 DS3s, has anyone ever heard that it is not a good practice to have each DS3 be its own area? I was talking to someone and they said that it may not be a good idea to have multiple areas on the same router, but I have never heard that. Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=13118t=13108 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
E1 interface [7:12864]
Hey, I know that this sounds dumb, but I've never had to install, configure, or support an E1 interface. So today I went to put together a sales order for someone installing a router in Europe, and the only E1 interfaces I can find are PRI and multiflex (?) for doing voice and data. Obviously I need to get more info from the provider over there, but I'm wondering what I'm missing. With a T1 interface, you just have to decide whether or not it gets an internal CSU/DSU or not and then order a WIC-T1 or a WIC-1DSU-T1. Help! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=12864t=12864 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: E1 interface [7:12864]
OK, so do you know the actual serial interface that I should order assuming that they will provide the CSU/DSU? Is there a WIC-E1? I can't find it. Thanks, by the way, you guys are a huge help... Winchester, Derek wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Correct. All you need is a serial interface. If you ask for a T1 or a E1 they will always offer you a Pri or multiflex. Serial is the only interface you should ask for when using a T1 or E1 Derek S. Winchester -Original Message- From: Daniel Cotts [mailto:[EMAIL PROTECTED]] Sent: Wednesday, July 18, 2001 4:22 PM To: [EMAIL PROTECTED] Subject: RE: E1 interface [7:12864] My experience is that in Europe the Telco provides the CSU/DSU. They should hand off to you as V.35 so all you need is a serial port. Verify this. -Original Message- From: Matt [mailto:[EMAIL PROTECTED]] Sent: Wednesday, July 18, 2001 2:54 PM To: [EMAIL PROTECTED] Subject: E1 interface [7:12864] Hey, I know that this sounds dumb, but I've never had to install, configure, or support an E1 interface. So today I went to put together a sales order for someone installing a router in Europe, and the only E1 interfaces I can find are PRI and multiflex (?) for doing voice and data. Obviously I need to get more info from the provider over there, but I'm wondering what I'm missing. With a T1 interface, you just have to decide whether or not it gets an internal CSU/DSU or not and then order a WIC-T1 or a WIC-1DSU-T1. Help! Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=12883t=12864 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCNA Logo [7:4966]
At 09:06 PM 7/10/01 -0400, you wrote: Follow the instructions on the cisco website concerning logos. I think it took 24 hrs for them to email them to me. I just signed up (finally, been certified for 4 months now), and just got the logos within minutes of asking for them. It took me longer to find my testing paperwork than it did to sign up. From cisco's home page go to training cert then go to tracking system and have fun. Matt Matt Wehland [EMAIL PROTECTED] Computer Network Specialist MCSE CCNA Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=11997t=4966 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: IP helper addresses [7:11434]
also tacacs -Original Message- From: Patrick Ramsey [mailto:[EMAIL PROTECTED]] Sent: Monday, July 09, 2001 9:59 AM To: [EMAIL PROTECTED] Subject: Re: IP helper addresses [7:11434] both. And remeber to disable all broadcasts you do not want forwarded. By default cisco forwards the following as well as bootp/dhcp: no ip forward-protocol udp tftp no ip forward-protocol udp domain no ip forward-protocol udp time no ip forward-protocol udp netbios-ns no ip forward-protocol udp netbios-dgm These commands can be put in global config to control all vlans supporting ip helpers. -Patrick Wilson, Christian 07/09/01 09:42AM If I enter two ip helper address statements referencing two different IP addresses in my router configs, which one does the router use? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=11441t=11434 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cisco ACL's [7:11114]
Cisco access lists field guide by Gil Held and Kent Hundley, McGraw-Hill Technical Expert -Original Message- From: Caballero, Eddie [mailto:[EMAIL PROTECTED]] Sent: Thursday, July 05, 2001 4:37 PM To: [EMAIL PROTECTED] Subject: Cisco ACL's [7:4] Hi, Anyone know of a good book or source of information on Cisco Access-lists. Is there any sort of book with a plethora of examples and information on the subject? Thanks, Eddie Caballero Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=5t=4 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
HELP! PIM over GRE over IPSEC [7:11137]
I want to set multicast traffic through a GRE tunnel so that I don't have to mess with my IPSEC tunnel. In a lab I am trying just the PIM over GRE and I can't make it work. Any help would be appreciated. Thanks.. Matt Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=11137t=11137 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: tracking rogue dialup users [7:11145]
i work for an isp, and what happens is, the website will call us up, and say a user broke into our server at xx:xx am/pm we then look at who was logged on at that time, on that ip address, and we can tell their username, and also if they have caller ID like we do, we can tell their phone number. However, we don't give out that info without a court order, because of privacy. But we tell that to the website that was cracked. - Original Message - From: - To: Cc: Security Basics (E-mail) Sent: Tuesday, July 03, 2001 4:15 AM Subject: tracking rogue dialup users Greetz. Just a matter of interest. Say there is user A, he dials up to ISP J. User A breaks into server X. Server X has the ip, he contacts the isp How is the user tracked from there on... Do servers like CiscoSecure ACS keep track of the ip and the time connected. The reason I am asking is in my little experience that I had with CiscoSecure ACS and their radius, I could not find such info on the logs. Is tacacs perhaps a little better, will it give me more info? Or will this user just get away with this -- Doubt it though Any help will be greatly appreciated. Ciao Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=11145t=11145 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Found a good deal on FLASH memory [7:10744]
At 11:30 PM 7/2/01 -0400, Circusnuts wrote: Prices are low on a lot of the Cisco stuff, but this is good extreme for 2500 FLASH... http://search.auctions.yahoo.com/search/auc?p=cisco+flashalocale=0usacc=us Phil Are you sure it's 2500 compatible flash? No where on the auction do I see what models it's for (although I may have missed it). While this would be a great price for flash for the 2500 series, it seems about right for flash compatible with other models Matt Wehland [EMAIL PROTECTED] Computer Network Specialist MCSE CCNA Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=11008t=10744 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCNA scoring [7:10407]
The scoring is not weighted or curved; that is, your score is not based upon others' score or giving certain questions more weight. It's kind of weird the way Cisco figures your score. As soon as you pay your $100, you have scored 300 points. If you get 0 questions right, you get a 300/1000. If you get them all right, you get a 1000/1000. Your Cisco score = 300 + (number right/65) * 700 So, with your 946, you missed 5 questions out of 65. You scored roughly 92.2%. You need to score 51/65 (78.5%) to pass. Matt Sam Sneed wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... I passed CCNA yesterday with a 946/1000(there is no integer divisible by 65 that would give me this score so I know its curved). I did not think I was doing well throughout the exam yet I got a good score. When it started, I was told that you need 849/1000 based on a score that ranges between 300 and 1000. So is this graded on a curve? If I got 3 wrong would my score be 62/65= 954/1000? I don't think it works that way. I overstudied thinking I needed at least 55/65 to pass but I do not think this was the case. Why would they grade on a curve? If you can't answer 85% of the questions I think you should fail. Are the CCNP exams graded on this weird scale and as easy to pass as well? I recieved my MCSE a few months ago and honestly think the scenario questions on those test were harder than any of the questions on th CCNA.Coming from a Computer Science background at Rutgers, I can guarantee the midterms and finals on my networking courses there were 100 times more challenging than these exams.I barely needed a pen and paper throughout the whole CCNA. Anyway before I digress any further I just wanted to know how the grading worked on the CCNP and the scores required to pass. Thanks. Sam Sneed CCNA # 3,324,567,892 MSCE # 5,324,324,332 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=10577t=10407 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Technical Questions [7:10427]
I'm pretty good at allocating address blocks in binary as well. What I'm not good at is analyzing several decimal addresses (with variable-length masks) to see if they overlap. I almost always am forced to write these out in binary. See additional in-line comment. Howard C. Berkowitz wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Open Forum might be more up to speed if your free-time consists of working address plans in binary or looking for probability in the pregnant chads of Fortran punch cards :o) There's something wrong with doing address plans in binary? Best way to learn, once you realize you don't have to do all 32 bits in binary. Seriously, when I plan an address structure, and I am documenting it, my primary mode is binary, and then converting to dotted decimal where appropriate. Now, when I say planning address structures, it often is to say a /19 here, split into 8 /21 for I'll agree you're probably pretty good at subnetting in your head. Your typing skills could be further honed, however. :-) areas. Not boasting here, but when you've been doing these for what...15 years or so, I can do a fair bit of subnetting in my head. There are tricks, but I wouldn't confuse a beginner with them. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=10485t=10427 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Pix and iip options [7:10409]
This is the IP Router Alert option from RFC 2113. http://www.faqs.org/rfcs/rfc2113.html BOURNE, KENNETH wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hello , my Pix 515 is logging large amounts of denies from a host because of ip option 0x14. I checked cco for the system message 106012 it tells me why it is denying it but not what causes it . Can someone please give me or point me to somewhere to find more info about ip option 0x14 and about ip options in general ? thanks in advance. |Ken Bourne,CCNA|Network Specialist| |702-657-3432(direct)|702-524-1193(mobile)||[EMAIL PROTECTED]| Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=10487t=10409 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Apologize for these two Questions [7:7111]
I used the Global Knowledge MCSE study guides, the Trancender exam, and lots of time in my Win2K lab. The global knowledge books covered all of the material needed for me to pass my exams. There are also some good links avaiable at www.cramsession.com Matt Reel, JohnX wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Comrades, Please do not fan the flame the flames of the religious O/S war... from this message. I passed my Switch test this Saturday... Walking away with a big smile; Thank you all for your help! Due to my current Intel contract situation, I will be have to put my CCNP drive and desire on hold for three month while I migrate my MCSE 3.51 certification to a MCSE 2K certification... BUT, I will return as I really enjoy Cisco and Networking more. Question 1: Is there is a MCSE study group such as this one in existence? Question 2: Has anyone found a set of books that is really good? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=7208t=7111 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: serial interfaces [7:7089]
Remeber the ? is your best friend. Matt Adekola, Dennis D wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi guys Can anyone tel me if the config for the DCE is clockrate or clock rate Thanks Tade Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=7209t=7089 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cisco to Ravlin IPSEC Card [7:1868]
What model Ravlin are you using? I have never heard of a Ravlin having a IPSEC card. The most common way of having Ravlins communicate is Ravlin to Ravlin through a secure VPN between the two. The router just forwards the packets to the proper destination. (IE packets sent from the Ravlin use the Ravlins remote IP address in the header and thats what the router uses to determine where to send the packet.) I need some more information to know what exactly you want done. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Clare, Charles Sent: Wednesday, April 25, 2001 10:26 AM To: [EMAIL PROTECTED] Subject: Cisco to Ravlin IPSEC Card [7:1868] Has any one got a cisco router talking to a Ravlin IPSEC Card Running IPSEC ? Charles CCDP,CCNP+Voice, MCSE+I FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=2086t=1868 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: FECN's and Dropped Packets... [7:110]
How long ago where the counters cleared on the router. 27 dropped packets would not be a concern over a large period of time. Same goes for the FECN's. Tell us when the stats where last cleared. Matt Street Network Engineer USPS-Network Integration and Support 888-877-7662 ext 3798 pager 1800pagemci pin#3850330 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Rizzo Damian Sent: Tuesday, April 10, 2001 4:59 PM To: [EMAIL PROTECTED] Subject: FECN's and Dropped Packets... [7:110] Hi all...When I do a "show frame-relay pvc" on our Internet Router, the following statistics bother me; in FECN pkts 12974 dropped pkts 27 We have recently been experiencing some noticeable slow downs on our Internet connection, do these statistics prove that we have a problem somewhere, or should I not be so concerned with these? Thanks! -Rizzo FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=112t=110 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: linux on a 2500 ? Was: Programming under IOS
Well I've watched this thread for a couple of days and hoped someone else would find the right answer (I didn't feel like digging). I knew I had seen something about this on my local Linux user group list several months ago. Unfortunately I couldn't find it in my mail archives, bookmarks, general web searches or elsewhere. After asking my local LUG for help and then some more searching, here is the link to the uclinux-cisco project (uclinux is a project for running linux on embedded system, uclinux-cisco is a port to the cisco platform, 2500 series mostly) There is source (~56MG) and several percompiled binaries. http://www.mcvax.org/~koen/uClinux-cisco2500/ Neat idea, and I do want to play with some of the precompiles kernels, but I really have to ask myself, WHY? What is the problem being solved by running linux on such an expensive (for what you get) platform? Any ideas, the web site seemed lacking in this kind of info. Oh well, some of the most enjoyable things are done just for the hell of it. Matt Wehland [EMAIL PROTECTED] MCSE CCNA _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Better do those V-labs while you can
I heard a while back they decided to do training only (no more network services). Any idea who they cut? Programmers or networkers? "Mask Of Zorro" wrote in message ... It was a bloodbath over at Metntor Technologies this morning - another big RIF. Better do those V-labs while they are still available... looks like it won't be long. Z _ Get your FREE download of MSN Explorer at http://explorer.msn.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Trouble copy flash to TFTP, source file not found (Learn to type stupid)
I am still sending this message as it may help someone else sometime Hello, I am having trouble copying the IOS from my 2501 to my TFTP server (Cisco's NT server). The TFTP server is up and working, I can copy configs in both directions. When I try to copy the flash from the 2501 to the tftp server, I enter in the source file name, and then either accept the same name on the TFTP server or change it (changed in the following example). I should be able to copy from the flash no matter what, right? --- Opps --- Just found my own answer, I think. I just copied the file name from a show ver (should work from anywhere the file name is displayed), into the clipboard and then 'pasted to host' from hyperterminal. Worked just fine. I wonder what I was mistyping. Oh just found it, I was typing a one instead of an 'L' here igs-ir-l When I pasted the commands into my email client i could see the difference between the L and one, in Hyperterminal I couldn't tell the difference (I just checked again, whatever font is used in Hyperterminal the little 'L' and the 'one' are exactly the same, D*MN them) Oh well Moral of the story, Watch your typing, your fonts, and copy filenames if needed. Matt Wehland _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Int E0 trouble shooting
Hello, In my last message 'Thanks for the Archives' I mentioned that I had found the answer to my E0 'line protocol down' problem. Well I lied, although turning off keepalive with the command 'no keepalive' under the E0 interface gives the 'line protocol up' message, the interface isn't really working, seems no keepalive is good if you don't have anything to plug the router into. I had the AUI transceiver connected to my no name 10/100 switch. The tranceiver (LanArt)was showing link down (1 blink). I decided to plug it into my 1924 switch and it works fine. Made up a crossover cable and connected the 1924 to the no-name 10/100 and it works fine, also. I can connect from either the 10/100 uplink (25-26) or the regular 10MG ports (1-24) Why will the 1924 talk to the no name, but the 2501 won't? Is it possible something with the transceiver (I guess I could try the the same transceiver on the AUI port on the 1924 later)? Some other misc. questions I made up an ethernet loopback plug (RJ-45 with pins 1-3, 2-6) and plugged it into the transceiver on the 2501, still couldn't get the line up. Unplug the transceiver and plug it back in (resetting it) and it works, line protocol up. AUI transceiver loopback I read about this beast in the archives, anyone know of a pinout? Can it be used in place of a transceiver and a ethernet loopback? Thanks, Matt Wehland _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Thanks for the Archives (was to be-E0 line protocol down)
Thank you for the archives. I was just playing with my new 2501 and was having a problem with the line protocol being down. Looked through my books, looked on Cisco's site, couldn't find the answer (I'm sure it's on Cisco's site I just couldn't find it). Wrote a message asking for help, but before sending, I remembered the archives. Can't ask for help without trying there, can I? Searched on 'line protocol down' and found my answer in about the fourth message I viewed. 'no keepalives'. Doh! So this message is just a thank you and a reminder to check the archives before posting for help, the answer may already be in there. Matt Wehland _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
HOWTO: Make your own Cisco console cable (RJ-45 to DB-9/DB-25)
re twisted enough to fit into the solder cup. 10b. Heat the cup with the iron and insert wire(s). 10c. Repeat until done. DB-9 color code 1 Org 2 W/G 3 Grn 4 W/Brn 5 Blu and W/Blu 6 N/A 7 Brn 8 W/O 9 N/A 11. Check cable: another visible check, then plug it in and see if it works 11a. If the cable works, put the hood on (if you have one) 11b. Uniquely label the cable, both ends. It may not seem like a big deal now, but it sure is nice when you have several routers terminating in the same place to be able to identify which cable goes to each device. Even if your label is only a serial number such as 1001, 1002, etc. you will be able to trouble shoot cabling problems without resorting to the old, tug the cable and see what moves routine (I've done enough of that in my life). 12. Enjoy :-) Hopefully I will get this on my web site soon. I hope this helps somebody, if there are any major problems, corrections or advice please let me know- Matt Wehland [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCIE and 2500 series issue
At 10:43 AM 2/17/01 -0500, you wrote: All, I have 2 guys at work that have passed the ccie written and are going to take the practical at the end of this month. I have 3 2500 series at home 2 2501 and a 2503 along with a cisco 804. I have a chance to buy 3 more 2500 at a very very good price, Well if that price is very, very good, buy them, use them, and then sell for a profit. You may find that they work just fine, and if the price is right $600us, then you should be able to make some $ off of them to buy bigger toys. Matt Wehland _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco Lab Tax Write Off
At 08:12 PM 2/14/01 -0500, you wrote: Are router's/switche's/isdn simulator's purchased for the home lab tax deductible. Also, are the ciscopress textbook's tax deductible expense. Is anyone else claiming these on the Federal Taxes? TIA Even if I can write them off, I wouldn't bother. I plan on selling off most of my equipment in the future, so all I'm keeping track of is initial cost, upgrades, and them price I get for them, so I don't get taxed on the 'Income' when I sell them. And since I don't see the equipment depreciating much while I own it (even for a year) I should be fine. If I were to write it off then I am stuck with the equipment. Even if I keep going for more Cisco cert, how many 2501/02's do I need? I would rather sell off some of the lower end equipment and buy higher end gear in the future. Now if I were starting a school/online rack/router rental, and planned on keeping the gear forever then I would look into write off's. How many people have keep the same equipment for more than a year? Seems like a lot of the routers (from student labs) I look at are being sold to finance newer labs, or people are just getting out of their labs altogether. Matt Wehland _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Broadcast LMI Keepalives?
As for your CKT issues the router is dropping LMI packets. From just the output given below it looks like the local bell probably has a transmit issue from your site to the end carrier (ie WCOM). I suggest opening a tkt with your frame-relay provider to resolve the issue. As for your broadcast question I do not know the answer of the top of my head. Could luck with your Frame-Relay provider. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of John Neiberger Sent: Friday, February 09, 2001 11:57 AM To: [EMAIL PROTECTED] Subject: Broadcast LMI Keepalives? We have a circuit that is having pretty severe problems. No errors are being seen at the router serial interface, but we are experiencing about 50% packet loss (500 byte packets) incoming. I've just noticed something else that is odd. For each incoming LMI response, the number of received broadcasts increments. Serial0 is up, line protocol is up Hardware is HD64570 Description: 24.YBGA.xx MTU 1500 bytes, BW 1544 Kbit, DLY 2 usec, rely 255/255, load 2/255 Encapsulation FRAME-RELAY, loopback not set, keepalive set (10 sec) LMI enq sent 235, LMI stat recvd 218, LMI upd recvd 0, DTE LMI up LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE Broadcast queue 0/64, broadcasts sent/dropped 1135/0, interface broadcasts 1018 Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters 00:39:18 Input queue: 1/75/0 (size/max/drops); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/23/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) 5 minute input rate 17000 bits/sec, 7 packets/sec 5 minute output rate 14000 bits/sec, 9 packets/sec 20505 packets input, 5242248 bytes, 0 no buffer Received 218 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 26000 packets output, 5145390 bytes, 0 underruns 0 output errors, 0 collisions, 0 interface resets 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up Because some keepalives are being missed, does that cause the frame switch to change the way it sends them? I couldn't find any other example of LMI keepalives causing the broadcast counters to increase, and I checked this on interfaces using both Cisco and ANSI LMI. any ideas? thanks, John Find the best deals on the web at AltaVista Shopping! http://www.shopping.altavista.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Official CIPT coursebook
Anyone willing to part with the official CIPT course book? Email if interested _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Curious Quirk.
Hello all, I ran across something interesting and wondered if any of you would know the reason for this. I recently set up a ring of routers whose gateway router was also a gateway router for another network. Both networks were connected via ethernet to this gateway router. One of these networks is connected as a secondary subnet on the primary fast-ethernet interface. When setting up eigrp, it would only broadcast updates to the network that was the primary subnet on that fast-ethernet interface. Can anyone explain to me why this happened? Is this something just unique to eigrp, or all routing protocols? I'm curious and puzzled. :) Thanks, Matthew M. Holmquist, CCNA Consulting Engineer Info Avenue Internet Services 803-802-4600 http://www.infoave.net [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
5509 cam table/HA Firewall problem
I have been having a problem with our HA Checkpoint Firewall-1 solution for about 3 weeks now, and finally narrowed what the problem is. First a little background... Each Firewall has the same set of IP address/Mac addresses. One Firewall is active, while the other is in standby mode. Whenever there is a failover, manual or otherwise, the active firewall's interfaces go down, while the other firewall's interfaces come up. We are using (2) 5509's as our Ethernet switches, that are connected via a LANE module that goes up to a pair of 8540 ATM switches connected by an OC12 trunk. With each correspinding interface on each Firewall plugged into the same switch, the failover is totally transparent. As soon as the failover happens, the switch updates it's CAM table by removing the old port assignment, and adding the new one. The issue is that we are trying to have FWA plug into 5509A exclusively and FWB plug into 5509B exclusively. When we failover in that scenario, the new switch updates it's CAM entry, but the old switch never removes his. We have to wait for the "cam agingtime" to expire before that entry will be cleared out, and can start passing traffic again. On a subnet with 500 PC's hooked up, are there any issues with setting the agingtime down to 15 seconds, instead of the 5 minute default? Is there a cleaner solution to my problem? Any help or insight would be greatly appreciated. Sincerely, Matt Morrow _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: DDS encapsulation in Australia
I would also add that it is only a physical media. Think of it as a T-1, T-3, sonet etc.. The encapsulation has no bearing on the physical media or farming in this case. DDS is a older way of delivering a 56k circuit to ensure 1's density on the T-1 by inserting a 1 in every 8th bit of that particular DS0. Jesmond Psaila wrote: You can use both , you may even use frame over dds if you want, most of the times it is presented to you in X.21, so higher layer encapsulation should not matter, as long as both ends match. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of John Covey Sent: Tuesday, October 17, 2000 2:16 PM To: [EMAIL PROTECTED] Subject: Re: DDS encapsulation in Australia I'd say, more than likely ppp ""M. A."" [EMAIL PROTECTED]> wrote in message 001201c0380f$e3689240$[EMAIL PROTECTED]">news:001201c0380f$e3689240$[EMAIL PROTECTED]...Hi gang,This is a question related to the DDS (I think it stands for Digital Data Service) WAN links provided by Telstra in Australia. What's the encapsulation to be used on DDS links? Is it PPP or HDLC?Also, does anyone have an example configuration for DDS under serial interfaces?Much appreciate any help!Martin
RE: Router models?
At 08:22 PM 9/11/00 -0500, Yee, Jason wrote: thank you for the reply I will, any books or references I can use to memorise all these info On book I like (although I really haven't read all of it) is Cisco Router Handbook George C Sackett McGraw-Hill ISBN 0-07-058098-7 I bought this as a reference manual more than a study aid for my CCNA. The first part of the book goes over the Cisco product line with pictures and diagrams so you get info on what the different models are and get so see what they look like. The next part is basic router stuff, configuring, loading IOS etc. The last part goes over configuring routing protocols, RIP, OSPF, IEGRP, BGP. Matt Wehland **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: You have received a George W. Bush Ecard from Matt Lange
Again I apologize about the message, I was trying to be harmless about this. Sorry did not think it would offend anyone. Matt -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Stanfield Hilman B(Brad) CONT NSSG Sent: Tuesday, September 12, 2000 11:43 AM To: '[EMAIL PROTECTED]'; [EMAIL PROTECTED] Subject: RE: You have received a George W. Bush Ecard from Matt Lange Matt! Keep your politics OUT of my mailbox AND off of this maillist!!! Paul, This rates right up there with the ericsson e-mail fraud message. Can't something be done about these people? Brad Stanfield Network/Integration Engineer [EMAIL PROTECTED] Government Micro Resources Network Operations Control Center Norfolk Naval Shipyard Bldg 33 NAVSEA NCOE 757-393-9526 1-800-626-6622 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Monday, September 11, 2000 6:37 PM To: [EMAIL PROTECTED] Subject: You have received a George W. Bush Ecard from Matt Lange [EMAIL PROTECTED], you have received a eCard from Matt Lange at e-mail address [EMAIL PROTECTED] To pick up your virtual postcard, go to the George W. Bush website at: http://www.georgewbush.com/getpostcard.asp Copy and paste the following postcard number: 320232569 **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: The H1-B visa program is a fraud.
Hey just remember they are willing to take the pay cut to get citizenship. Also, 50,000 grand is like 1 millions over there so I have been told by a Consultant from India. They come here take away american jobs and make there nest egg and go back as kings. Just my two cents, Oh and I am not racist I would feel the same if it were someone form Germany as well. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Sam Adams Sent: Monday, September 11, 2000 8:12 PM To: 'Dick Silva'; [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: RE: The H1-B visa program is a fraud. I don't know what controls are in place to enforce the law. But I would think that someone tooting his horn about cheap foreign workers is asking for trouble. Perhaps, you should show the article to the INS or the appropriate agency to put these guys out of business. Not only are they exploiting the system and the American people but exploiting the foreign workers as well. -Original Message- From: Dick Silva [mailto:[EMAIL PROTECTED]] Sent: Monday, September 11, 2000 12:43 PM To: Sam Adams; [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: The H1-B visa program is a fraud. / H-1Bs are not paid at market rate even though it is federal law. In Clearwater, FL there is a company that recruits only H-1Bs from other countries. One of their salesman was being interviewed by the local newspaper, St Petersburg Times, and he was naming off the advantages of hiring foreign workers, and I quote, "We just placed one man in Boston for $55k/yr if it had been an American they would have had to pay $85K/yr". I keep wondering about that level playing field George Bush Sr was always talking about. Like the man said...The H-1B program is a fraud. -Original Message- From: Sam Adams [EMAIL PROTECTED] To: [EMAIL PROTECTED] [EMAIL PROTECTED]; [EMAIL PROTECTED] [EMAIL PROTECTED] Date: Monday, September 11, 2000 3:29 PM Subject: RE: The H1-B visa program is a fraud. I thought H1-B were suppose to be paid at market rate? BTW, it takes about 3 months to transfer a H1-B so if the foreign workers do not like their jobs then they have no recourse but work until it is transferred. Or not work until it is transferred. They don't have it easy either. IMHO, it seems that the only winners are the companies who hire them. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Dick Silva Sent: Monday, September 11, 2000 9:58 AM To: cryptobyte; ElephantChild; [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: The H1-B visa program is a fraud. / A thought that occurred to me is.how do all the H-1Bs get experience when supposedly the U.S. is so much more technically advanced than most other countries? Maybe U.S. corporations do not require H-1Bs to have experience because they work for so much less. As I said, just a thought. \ -Original Message- From: cryptobyte [EMAIL PROTECTED] To: ElephantChild [EMAIL PROTECTED]; [EMAIL PROTECTED] [EMAIL PROTECTED]; [EMAIL PROTECTED] [EMAIL PROTECTED] Date: Monday, September 11, 2000 11:28 AM Subject: Re: The H1-B visa program is a fraud. It's not on topic for [EMAIL PROTECTED], which is about getting certifications, not jobs. ElephantChild, I say it has alot to do " ... about getting certifications, ..." If you have a Certification, but no experience, what is it called or what is the state, status of your certification - you are a PAPER . At least, that is what is advocated by some; therefore, at least, in part, this is applicable whether you are a CCNA, CCDA, CCxx, CCIE, xNx, MSxx, etc. [Extended to Novell, Micrsoft, ...] At least with Cisco devices, at the lower end, it is hard for people to beg, borrow or steal an entry level position. And then, to paraphrase, they must pay there dues and proceed with their career. At the upper end, sacrifice and hard work, money, prestige, status and on going work to stay current. In that it follows the path of least resistance, Capitalism starts to acquire the properties of electricity. Capitalism is a predicated on the ability to produce and sell a product [or service] at the least expense for the highest margin possible. If your type of services are needed and you are a bono fide, card carrying CCxx, MSxx, xNx, you have expectations about market value, time in industry, what you know, who you know, how much you know, etc. To repeat, you have expectations of what you are worth. What happens, since you want x money and you can't get any work because you are just a PAPER at your new expertise level because joe/jane doe will do the work for a fraction of what you have come to expect, probably deserve and the market used to bear. [Union shops come to mind.] Suddenly, H1B and Certification are entwined - up to your and my neck. Then, to take it a step further, what happens when an H1B starts under cutting another H1B. At that point, we are all on a downward spiral
RE: You have received a George W. Bush Ecard from Matt Lange
If you like socialism vote for Al Gore! -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Erik Sent: Tuesday, September 12, 2000 12:47 AM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: You have received a George W. Bush Ecard from Matt Lange Mr. Matt C. Lange, This is spam, and a very offensive one. before you come here trying to learn networking, I suggest you learn basic netiquette, please refer to: http://www.ietf.org/rfc/rfc1855.txt?number=1855 here is another one for you; http://www.ietf.org/rfc/rfc1594.txt?number=1594 -Erik - Original Message - From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, September 11, 2000 6:36 PM Subject: You have received a George W. Bush Ecard from Matt Lange | [EMAIL PROTECTED], you have received a eCard from Matt Lange at e-mail address [EMAIL PROTECTED] | To pick up your virtual postcard, go to the George W. Bush website at: | www.donkeyshow.com **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Chicago area study group
Hello, My name is Matt Wehland and I was wondering who else is in the Chicago (Illinois) area and studying for CCNA,CCNP. I am currently working on my CCNA, but taking my time and over studying, getting ready to work on my CCNP. Currently it is just a friend and my self, we worked on our MCSE's together (I was a 3.12 CNE years ago, also). We have been studying with 1 2501, books, on-line simulators (free ones so far), and now Transcender for CCNA (useful when used as another tool, not a cheating aid). Looking for anyone else in the Chicago Metro area getting together for a study group. I live in Monee, my friend Brian lives in Glencoe. Anyone know of any groups that currently meet? If not, let me know if you just want to get together informally for labs/study sessions. (O/T) Will also help with MCSE studying, and I am interested in learning more Linux. Matt Wehland (MCSE) [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
hp internet advisor
Hiya everyone, I need helpwith finding info on "Hewlett-Packard's internet advisor" model j2522a. I've recently aquired one and know nothing about them. I've searched hp's site but found little info there. thanks all Matthew Zeniou CCNA
Re: One Objective in Routing 2.0
Taken literally fields in the routing mean exactly that, fields in a routing table. So if you issue a show ip route, there are several fields. Listed below are those fields: 1. How the route was learned 2. Destination logical network or subnet 3. Administrative distance 4. Metric value (reachability factor) 5. Next hop logical address 6. Age of entry 7. Interface through which the route was learned and which packet will leave\ Matt "yangluobin" [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Dear group, By looking at the objectives of Routing 2.0, I found the following topic: Describe the use of the fields in a routing table. Can anybody tell me about what is called the fields in a routing table and how to use these fields? Thanks in advance Luobin ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ip classless ?
The ip classless command is used when setting up default routes. Cisco routers (classful by default) expect a subnet mask when entering your static ip route commands, so when you are setting up a default route, you must specify ip classless, since no remote subnets will be in its routing table for default routes. Matt ""Yee, Jason"" [EMAIL PROTECTED] wrote in message 859B90209E2FD311BE5600902751445D2E7CF4@LYNX">news:859B90209E2FD311BE5600902751445D2E7CF4@LYNX... hi , Anyone knows why when we use RIP or IGRP routing protocols and we have a default network command entered , we need to include ip classless? Any form of input will be greatly appreciated thanks Jason ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: If u had to take one class
WWW.mentortech.com and take the ECP course taught by Andrew Bruce Caslow.. Basically they give you very har labs and you build them. They will let you know where you are weak. Or I would suggest a BGP course and know your route maps cold!! -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Dennis E. Bates Sent: Sunday, August 06, 2000 8:33 PM To: [EMAIL PROTECTED] Subject: If u had to take one class Hi Group !!! Just a question. If your employer had agreed to pay for one and only one class to help you prepare for your CCIE lab exam (you have already passed your written). What class would you take and where ? I would like to use the money to buy equipment, but unfortunatly, thats not my call. I'm thinking CATM or CVOICE since, i don't get much of a chance to put my hands on ATM or Voip gear. But then again maybe I should reinforce the meat and potatoes topics like advanced OSPF or BGP ? Any suggestions as to the best use of the one class? Thanks, Dennis ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BCMSN test
I just took the BCMSN test and passed with an 825 Just to let you know there is not any ATM on this. But have down cold all aspects of Trunking. Matt C. Lange CCNP CCDP MCSE CSE ESE ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
off subject
Hello group, I have been asking arround and it seems to me that UNIX admins are way more desirable than router admins. I guess from what I have been hearing is that if you are solid in unix you are pretty much set for life. This is just what I hear in the chicago area. Mainly HP-UX Matt ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: A boon for Cisco Engineers!
www.aprisma.com They make Spectrum Enterprize manager a very complete tool for network management. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Nasser N Khwaja Sent: Monday, July 31, 2000 3:09 PM To: [EMAIL PROTECTED] Subject: A boon for Cisco Engineers! Hello Everybody, Does anyone know about any software package that monitors a network so that if any router(s) goes down the support Engineer is automatically paged. Please let me know, Thanks in advance, [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cisco Online test.
Only the last 23 or least significant bits are transformed to the mac. Corect answer is 01-00-5e-40-ff-2d Lets look at how I got 40 out of the 192 part of the first listing. 192 in binary is 1100 ^ This bit does not migrate to the MAC it is always 0(that is not used) This is why it is possible to have 32 different IP Multicast address with the same MAC.( Don't worry though Cisco says there won't be any harm in this). I hope this helps Matt C. Lange CCNP CCDP MCSE CS I didn't fair very well on BCMSN. Two questions that I though I got right but were marked wrong were on Multicast IP address: 224.192.255.45 = My answer was 01-00-5E-C0-FF-2D and 224.163.163.45 = My answer was 01-00-5E-A3-A3-2D Both were marked wrong on the test. What did I do wrong? Regards, Scott David Ristau wrote: Zoiks ! Wiped my butt, 24/52 Cisco Network Acad never prepared me for that one.. thanks Dave henry wrote: Each exam you can use six times. many qiz is real qiz! I use is prepare CVOICE, 60% qizs is same. Henry Zheng [EMAIL PROTECTED] wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Requires CCO id. http://www.cisco.com/cgi-bin/front.x/wwtraining/colt/ColtLogin.pl Anyone tried that? Ryan ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] --- ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: where do live
South Central Los Angelas, or Gary Indiana, hehehehe : * ) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of William E Gragido Sent: Sunday, July 30, 2000 3:48 AM To: Jim Bond; [EMAIL PROTECTED] Subject: RE: where do live San Diego brother, San Diego -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Jim Bond Sent: Saturday, July 29, 2000 9:03 PM To: [EMAIL PROTECTED] Subject: where do live Hello, I'm so tired of working 60-70 hours a week; I'm so tried of paying $3,500 mortgage per month for a 1,300 sqf home; I'm so tired of driving on that crowed highway (if you consider 5MPH is high). I'm thinking moving out of silicon valley bay area. Where, in US, can I find a place that is not cold in winter, not hot in summer, no too much snow, no too much rain, IT job market not too bad? I know it's difficult to find such a place, but close? Thanks in advance. Jim __ Do You Yahoo!? Kick off your party with Yahoo! Invites. http://invites.yahoo.com/ ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CISCO Premier partner
what is ccse -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of ian gomeche Sent: Sunday, July 30, 2000 7:24 PM To: cisco Subject: CISCO Premier partner i was told by a training centre , that if i passed CCNA, CCDA and CCSE myself or had up to 3 people in my company each pass one of them each etc then i would be eligible to be a CISCO Premier Partner and can put the CISCO logo on my letterhead. this would definitely be worth doing i reckon. additionially i would get special acccess to CISCO marketing plans etc. i visited the relevant part of the CISCO web site and phoned CISCO U.K. but i do not seem to have found out much more. does anyone know anything about this? regards ian gomeche ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
