Re: [newbie-it] Sicurezza
Ciao, dove trovo il file access_log? Se l'IP fosse assegnato dinamicamente avrebbe senso lo stesso denunciarlo alla polizia postale? Grazie e ciao! Enrico ps non riesco a disattivare reply to da lycos mail... spero al piu presto! _ Get 25MB, POP3, Spam Filtering with LYCOS MAIL PLUS for $19.95/year. http://login.mail.lycos.com/brandPage.shtml?pageId=plusref=lmtplus
[newbie-it] I: Masterizzazioni byFly
La nebbia finalmente si sta iniziando a dipanare!! Finalmente sono riuscito a fare la mia prima connessione ad internet, a scaricare la posta e a masterizzare il mio primo CD dati. Ora manca il lettore e poi quasi tutto funziona (ci sarà anche la scheda TV che penso creerà più di qualche problema..). Come alcuni di voi mi hanno consigliato, vi invio i miei file /etc/fstab /etc/lilo.conf /etc/modules.conf per vedere se qualcuno di voi mi riesce in qualche modo ad aiutare: il problema è far vedere il lettore IDE (Creative) a XCDRoast per fare delle copie di CD al volo (purtroppo non riesco ad abilitare l'emulazione scsi). Grazie ancora di tutto a tutti voi che mi state aiutando. Buona giornata Enrico boot=/dev/hda map=/boot/map vga=normal default=linux keytable=/boot/it-latin1.klt prompt nowarn timeout=100 message=/boot/message menu-scheme=wb:bw:wb:bw image=/boot/vmlinuz label=linux root=/dev/hda5 initrd=/boot/initrd.img append=quiet devfs=mount hdc=ide-scsi hdd=ide-scsi vga=788 read-only image=/boot/vmlinuz label=linux-nonfb root=/dev/hda5 initrd=/boot/initrd.img append=devfs=mount hdc=ide-scsi read-only image=/boot/vmlinuz label=failsafe root=/dev/hda5 initrd=/boot/initrd.img append=failsafe devfs=nomount hdc=ide-scsi read-only other=/dev/fd0 label=floppy unsafe /dev/hda5 / reiserfs notail 1 1 none /dev/pts devpts mode=0620 0 0 /dev/hda6 /home reiserfs notail 1 2 none /mnt/cdrom supermount dev=/dev/scd0,fs=auto,ro,--,iocharset=iso8859-15,codepage=850,umask=0 0 0 none /mnt/cdrom2 supermount dev=/dev/hdd,fs=auto,ro,--,iocharset=iso8859-15,codepage=850,umask=0 0 0 none /mnt/floppy supermount dev=/dev/fd0,fs=auto,--,iocharset=iso8859-15,sync,codepage=850,umask=0 0 0 none /proc proc defaults 0 0 /dev/hda3 swap swap defaults 0 0 options ide-cd ignore=hdd probeall scsi_hostadapter ide-scsi probeall usb-interface usb-uhci
Re: [newbie-it] Sicurezza
Enrico ha scritto: Ciao, dove trovo il file access_log? Lo trovi in /var/log/httpd Se l'IP fosse assegnato dinamicamente avrebbe senso lo stesso denunciarlo alla polizia postale? Nn ha importanza che l'ip sai dinamico o meno xche' i providers dovrebbero avere a loro volta dei logs che documentano chi quel tal giorno alla tal ora era autenticato con quell'indirizzo ip. In verita' io sono contrario a procedere con una denuncia per vari motivi: 1) e' contro i miei principi 2) l'aggressore potrebbe essere a sua volta vittima di un worm (nel caso del log che ho pubblicato si tratta di Nimda) 3) nn ritengo necessario rovinare la vita a un ragazzino x quanto stupido possa essere Mi piacerebbe piuttosto capire come potrei contattare questo ipotetico cracker, volontario o involontario che sia, x fargli capire che o, e' vittima di un virus e nn lo sa, o nn gli conviene fare il furbo xche' disponendo della documentazione del suo tentativo di attacco lo tengo x le °°! ;)) Se qualcuno dei guru sa dirmi come si fa
Re: [newbie-it] scaricare librerie per c++
Il mer, 2003-01-22 alle 19:22, Leonardo ha scritto: libgcc_s.so.1 .dove la trovo??? Vai sul sito http://www.rpmfind.net E' un motore di ricerca per gli rpm - gli dai in pasto la libreria che cerchi: libgcc_s.so.1 e lui ti dovrebbe fornire il pacchetto che la contiene e una serie di link da cui scaricarlo direttamente. Ciao Sandro -- Dr. Sandro Porrazzini - [EMAIL PROTECTED] Linux Mandrake 9.0 on Pentium III - 733 Mhz Linux User # 203143 Linux Machine # 175781
[newbie-it] manuale di comandi da console
Ciao, qualuno conosce dei links che riportino i comandi da console di Linux e le loro descrizioni? Grazie e ciao! Enrico _ Get 25MB, POP3, Spam Filtering with LYCOS MAIL PLUS for $19.95/year. http://login.mail.lycos.com/brandPage.shtml?pageId=plusref=lmtplus
[newbie-it] comando shred su directory
Ciao, da Mandrake8.1 con KDE riuscivo a selezionare una directory ed eseguirne il comando shred. Da Gnome (1.4 credo) non ho questa opzione nei menu. Cosi ho aperto la console, ma il comando shred sembra possa essere eseguito solo sui file. Ho eseguito: $ shred * -u Mi sono trovato con i file eliminati solo dalla directory corrente. Dovrei fare lo stesso per tutte le subdirectory, magari creando un piccolo batch che le visiti tutte? Per cancellarle poi? Grazie mille! Enrico _ Get 25MB, POP3, Spam Filtering with LYCOS MAIL PLUS for $19.95/year. http://login.mail.lycos.com/brandPage.shtml?pageId=plusref=lmtplus
Re: [newbie-it] manuale di comandi da console
Enrico ha scritto: -- | Ciao, | qualuno conosce dei links che riportino i comandi da console di Linux e le loro descrizioni? | Grazie e ciao! | Enrico -- Qui trovi all'interno un elenco dei principali comandi con descrizioni, commenti e sintassi: http://www.linuxfacile.org/linuxfacile_5.pdf Poi direi che il sito principe della documentazione e': http://ildp.pluto.linux.it Spero di esserti stato utile.
Re: [newbie-it] I: Masterizzazioni byFly
Il gio, 2003-01-23 alle 09:03, Enrico Piccinini ha scritto: per vedere se qualcuno di voi mi riesce in qualche modo ad aiutare: il problema è far vedere il lettore IDE (Creative) a XCDRoast per fare delle copie di CD al volo (purtroppo non riesco ad abilitare l'emulazione scsi). Grazie ancora di tutto a tutti voi che mi state aiutando. Buona giornata Enrico Se il prolema è di fare copie di cd puoi anche procedere in questi due modi: 1) utilizzare il masterizzatore sia come lettore che scrittore passando attraverso l'immagine iso. 2) utilizzare il programma k3b (per kde) che è in grado di fare copia da lettore (ide) a masterizzatore (scsi). Ciao Sandro -- Dr. Sandro Porrazzini - [EMAIL PROTECTED] Linux Mandrake 9.0 on Pentium III - 733 Mhz Linux User # 203143 Linux Machine # 175781
[newbie-it] filesystem journaled e shred
Ciao (si si sono ancora io...), ho letto lanciando l'help da console del comando shred che il suo funzionamento non è attivo per alcuni filesystem modello jurnaled o sistemi RAID. In quelle situazioni -correggetemi se ho capito male- non c'è garanzia che i file vengono riscritti nella vecchia posizione. Mi interesserebbe sapere che tipo di operazione di potrebbe eseguire per sovrascrivere i dati (modello shred) con filesystem journaled. Ciao! Enrico _ Get 25MB, POP3, Spam Filtering with LYCOS MAIL PLUS for $19.95/year. http://login.mail.lycos.com/brandPage.shtml?pageId=plusref=lmtplus
Re: [newbie-it] manuale di comandi da console
On Thu, 23 Jan 2003 10:08:05 +0100 Enrico Teotti [EMAIL PROTECTED] wrote: Ciao, qualuno conosce dei links che riportino i comandi da console di Linux e le loro descrizioni? Grazie e ciao! Enrico Un qualsiasi manuale Linux o Unix è una buona base di partenza. Però, non sarà mai completo perché ognuno di noi carica sulla sua macchina cose diverse. Per esempio, se sul pc che uso adesso batto due volte TAB ottengo: $ Display all 2584 possibilities? (y or n) :su - Password: # Display all 2953 possibilities? (y or n) Questo è il numero di eseguibili che ho nel mio PATH e in quello di root. Sicuramente, tu avrai un numeri diversi. Non spaventarti troppo perché non tutti sono veri comandi. moltissimi sono eseguibili richiamati solo da altri comandi. Allora, prova a fare così: - vedi il contenuto del PATH di root e di un utente normale con echo $PATH - Per ogni directory trovata, lancia: man -f `ls /dir/del/path `|grep -iv 'nothing appropriate' lista. Attento alla differenza tra ' e `. e poi un sort -u lista A questo punto ti ritrovi un elenco abbastanza completo dei comandi disponibili sul tuo PC accompagnati da una breve descrizione del tipo: lp (1) - send requests to an LPRng print service lp (4) - line printer devices lp [cancel-cups] (1) - send requests to an LPRng print service lp [lp-LPRng](1) - send requests to an LPRng print service lp [lp-cups] (1) - print files Mancheranno solo quelli che non hanno una pagina man, ad es. tutti quelli di KDE. Probabilmente, se hai installato anche le pagine man in italiano, per molti comandi ti usciranno due righe: una in italiano ed una in inglese. Non mi viene in mente un modo per togliere solo quelle in una lingua, tranne che disinstallare temporaneamente le man-page italiane (togliere quelle inglesi è più complicato, sono legate ai programmi per la loro lettura) ciao, Andrea
Re: [newbie-it] Problemi scheda audio
Alle 14:58, mercoledì 22 gennaio 2003, Eraser Head ha scritto: Ciao. Ho da poco installato Mandrake 8.2, ma ho problemi con l'audio: i cd riesco a sentirli tranquillamente, mentre mp3, wav o altro (ad esempio audio in filmati flash) no. La scheda audio (VIA Technologies, VT8233 [AC97 Audio Controller]) è integrata nella motherboard (MSI KT3 Ultra). Ho controllato i permessi di /dev/sound/dsp e sono ok. Ho provato a lanciare il comando sndconfig, che mi riconosce la scheda audio ma si blocca al momento del test. Ora non saprei che altro tentare (a parte comprare una scheda audio decente)... Qualcuno ha qualche idea? Potrebbe, e dico potrebbe, essere una cavolata del mixer. Lancia Kmix e smanetta sul primo PCM (l'onda distorta blu), ovviamente con un Mp3 inserito; mi sembra di ricordare che mi fosse successa una cosa simile.. -- - -- Fabio Manunza -- ## n° macchina 140545 ## -
[newbie-it] balsa e procmail
Ciao, non riesco ad usare procmail con balsa. Quando tento di ricevere posta balsa si pianta in maniera brutale non rilasciando alcun codice d'errore anche se lo lancio da shell. Ho procmail 3.22, balsa 1.2.4 su mandrake 9.0. Vi invio il mio file .procmailrc: #--.procmailrc #Preliminaries SHELL=/bin/sh #Uso la Bourne shell (determino il path con which) MAILDIR=${HOME}/mail#questa e' la mia mail directory DEFAULT=/var/spool/mail/andea PMDIR=$HOME/Procmail # variabile per il log L OGFILE=$PMDIR/pm.log # To insert a blank line between each message's log entry, # uncomment next two lines (this is helpful for debugging) LOG= # Set to yes when debugging; default is no VERBOSE=yes # Set to no if you want minimal logging; default is all LOGABSTRACT=all INCLUDERC=$PMDIR/rc.testing INCLUDERC=$PMDIR/rc.subscriptions #-.procmailrc--end-- Qualcuno di voi e' riuscito a configurarlo? vi ringrazio in anticipo, Andrea
Re: [newbie-it] I: Masterizzazioni byFly
Enrico Piccinini wrote: La nebbia finalmente si sta iniziando a dipanare!! Finalmente sono riuscito a fare la mia prima connessione ad internet, a scaricare la posta e a masterizzare il mio primo CD dati. Ora manca il lettore e poi quasi tutto funziona (ci sarà anche la scheda TV che penso creerà più di qualche problema..). Come alcuni di voi mi hanno consigliato, vi invio i miei file /etc/fstab /etc/lilo.conf /etc/modules.conf per vedere se qualcuno di voi mi riesce in qualche modo ad aiutare: il problema è far vedere il lettore IDE (Creative) a XCDRoast per fare delle copie di CD al volo (purtroppo non riesco ad abilitare l'emulazione scsi). Grazie ancora di tutto a tutti voi che mi state aiutando. Buona giornata Enrico boot=/dev/hda map=/boot/map vga=normal default=linux keytable=/boot/it-latin1.klt prompt nowarn timeout=100 message=/boot/message menu-scheme=wb:bw:wb:bw image=/boot/vmlinuz label=linux root=/dev/hda5 initrd=/boot/initrd.img append=quiet devfs=mount hdc=ide-scsi hdd=ide-scsi vga=788 read-only image=/boot/vmlinuz label=linux-nonfb root=/dev/hda5 initrd=/boot/initrd.img append=devfs=mount hdc=ide-scsi read-only image=/boot/vmlinuz label=failsafe root=/dev/hda5 initrd=/boot/initrd.img append=failsafe devfs=nomount hdc=ide-scsi read-only other=/dev/fd0 label=floppy unsafe /dev/hda5 / reiserfs notail 1 1 none /dev/pts devpts mode=0620 0 0 /dev/hda6 /home reiserfs notail 1 2 none /mnt/cdrom supermount dev=/dev/scd0,fs=auto,ro,--,iocharset=iso8859-15,codepage=850,umask=0 0 0 none /mnt/cdrom2 supermount dev=/dev/hdd,fs=auto,ro,--,iocharset=iso8859-15,codepage=850,umask=0 0 0 none /mnt/floppy supermount dev=/dev/fd0,fs=auto,--,iocharset=iso8859-15,sync,codepage=850,umask=0 0 0 none /proc proc defaults 0 0 /dev/hda3 swap swap defaults 0 0 options ide-cd ignore=hdd probeall scsi_hostadapter ide-scsi probeall usb-interface usb-uhci io masterizzo al volo sia dati che audio e lo faccio con gnome-toaster è molto più semplice aggiungere il cdrom, infatti basta mettere un /dev/hdb ... masterizza con cdrecord o con cdrdao a scelta puoi masterizzare direttamente dagli mp3... ho postato diverse volte a riguardo ciao francesco p.s xcdroast è rimasto , ormai all'età della pietra.
Re: [newbie-it] Partizioni
* Emiliano La Licata wrote: Vorrei, diciamo, ribaltare la situazione, cioè ridimensionare ulteriormente win e lasciare a lui qualcosa come 10 G e tutto il resto darlo a linux... ma adesso come fare ??? Avete consigli... A tutti i consigli che gia' ti hanno dato aggiungo solo che quando anche io affrontai il problema usai fips per il ridimensionamento. Funge, lo trovi in rete con relativa documentazione, nonostante l'aspetto spartano credo sia molto piu' affidabile dei vari front-end che ci sono in circolazione ed e', aspetto da non sottovalutare, estremamente didattico. Io mi diverti' un mondo e relegai win$ in circa 2.5 GB senza nessun problema. -- syd - LU 285930 * LM 167646 msg10927/pgp0.pgp Description: PGP signature
Re: [newbie-it] Radeon 9000pro
sapete se esiste una versione dei driver ati per xfree86 vers. 4.2.1? sono riuscito a trovare solo i driver x xfree v. 4.2.0 in formato rpm che ovviamente non mi funzionano avendo l'xfree 4.2.1 (su mandrake 9). c'e' qualche soluzione al problema? Xfree supporta già di suo le scede Ati; che problemi hai? beh, non è proorio così. io ho lo stesso problema: ho una ATI Radeon 9000 (non pro) ma Mdk la vede come semplice VESA. Se si tenta di utilizzare un'altra scheda, tipo Radeon, o simili, nulla di fatto: dà un errore (non ricordo quale adesso) e devi tornare alla vesa altrimenti il OS non parte. infatti e' proprio cosi' anchio sto usando il vesa ma ho il problema del refresh verticale, che e' impostato sul valore di 60 vorrei portarlo a 85 in modo da non affaticare la vista, ma non mi riesce in nessun modo hai anche tu lo stesso problema? sai come risolverlo? = Luigi Beltramini [EMAIL PROTECTED] http://digilander.iol.it/citazioni
Re: [newbie-it] I: Masterizzazioni byFly
Alle 08:03, giovedì 23 gennaio 2003, Enrico Piccinini ha scritto: La nebbia finalmente si sta iniziando a dipanare!! Finalmente sono riuscito a fare la mia prima connessione ad internet, a scaricare la posta e a masterizzare il mio primo CD dati. ottimo! Ora manca il lettore e poi quasi tutto funziona questo è quello che hai messo in lilo.conf...giusto? append=quiet devfs=mount hdc=ide-scsi hdd=ide-scsi e questo è quello che c'è in fstabgiusto? none /mnt/cdrom2 supermount dev=/dev/hdd,fs=auto,ro,--,io c'è un incongruenza visto che hai emulato il lettore (hdd) in scsi in lilo.conf(non so che sono configurati a livello hardwer),il dispositivo è passato da hdd a = scd1 quest'1 l'ho messo tra perche non so se ci ho azeccato!... da root dai #cdrecord -scanbus e vedi come ti vengono rilevati i dispositivi. suppongo CD-RW scd0 CD scd1 controlla per sicurezza. cmq quando hai capito che nome ha preso , sostituiscilo in fstab al posto di hdd , e dovresti avere il lettore pronto al utilizzo per masterare al volo :) facci sapere. Ciao , Tom
Re: [newbie-it] I: Masterizzazioni byFly
Alle 08:03, giovedì 23 gennaio 2003, Enrico Piccinini ha scritto: per vedere se qualcuno di voi mi riesce in qualche modo ad aiutare: il problema è far vedere il lettore IDE (Creative) a XCDRoast per fare delle copie di CD al volo (purtroppo non riesco ad abilitare l'emulazione scsi). Grazie ancora di tutto a tutti voi che mi state aiutando. Buona giornata Enrico Lilo a posto. Fstab: verificare con #cdrecord -scanbus la posizione delle due periferiche; il numero centrale è quello che conta. Modificare scdx, sostituendo x con il numero trovato. Anche hdd ora diventa scdx. Sostituire. Eventualmente aggiustare il puntamento delle icone sul desktop. Eventualmente prendere in considerazione la proposta di Enrico. Vale. -- - -- Fabio Manunza -- ## n° macchina 140545 ## -
[newbie-it] k3b per masterizzare
Ho provato ad installare K3b in formato rpm (MK 9) per avere una GUI moderna ed efficiente-così dicono-per masterizzare ma l'utility di installazione ha sputato fuori questo: error: failed dependencies: libGLcore.so.1 is needed by k3b-0.7.5-1mdk RESULT=1 Eppure ho scaricato il pacchetto apposito per MK9.Cosa posso fare per risolvere le dipendenze ed installare il software suddetto? Ciao, Alessandro -- Vedere un mondo in un granello di sabbia e un cielo in un fiore selvatico. Tenere l'infinito sul palmo della mano e cogliere l'eternita' in un'ora. (William Blake)
Re: [newbie-it] k3b per masterizzare
Alle 14:13, giovedì 23 gennaio 2003, Alessandro ha scritto: libGLcore.so.1 is needed by k3b-0.7.5-1mdk RESULT=1 è una libreria annessa all driver per le schede video invidia... vorrei installare anche io questa libreria , ma senza dover installare tutto il paketto per la skeda video (che nn utilizzerei)... se c'è un modo per estrarre la libreria e installarla, interesserebbe anche a me!!! Ciao , Tom
Re: [newbie-it] k3b per masterizzare
Alle 15:13, giovedì 23 gennaio 2003, Alessandro ha scritto: Ho provato ad installare K3b in formato rpm (MK 9) per avere una GUI moderna ed efficiente-così dicono-per masterizzare ma l'utility di installazione ha sputato fuori questo: error: failed dependencies: libGLcore.so.1 is needed by k3b-0.7.5-1mdk RESULT=1 Eppure ho scaricato il pacchetto apposito per MK9.Cosa posso fare per risolvere le dipendenze ed installare il software suddetto? Ciao, Alessandro Perchè scaricarlo? Lo trovavi già sui CD di Mandrake... Daniele -- «Il mondo si divide in 10 tipi di persone: quelle che conoscono la numerazione binaria, e quelle che non la conoscono.»
Re: [newbie-it] k3b per masterizzare
On Thu, 23 Jan 2003 15:13:12 +0100 Alessandro [EMAIL PROTECTED] wrote: Ho provato ad installare K3b in formato rpm (MK 9) per avere una GUI moderna ed efficiente-così dicono-per masterizzare ma l'utility di installazione ha sputato fuori questo: error: failed dependencies: libGLcore.so.1 is needed by k3b-0.7.5-1mdk RESULT=1 Eppure ho scaricato il pacchetto apposito per MK9.Cosa posso fare per risolvere le dipendenze ed installare il software suddetto? Ciao, Dai urpmi k3b ti chiederà i(l) CD della distro in cui sono contenuti i pacchetti che gli servono. ciao, andrea
Re: [newbie-it] k3b per masterizzare
tom wrote: Alle 14:13, giovedì 23 gennaio 2003, Alessandro ha scritto: libGLcore.so.1 is needed by k3b-0.7.5-1mdk RESULT=1 è una libreria annessa all driver per le schede video invidia... vorrei installare anche io questa libreria , ma senza dover installare tutto il paketto per la skeda video (che nn utilizzerei)... se c'è un modo per estrarre la libreria e installarla, interesserebbe anche a me!!! Ciao , Tom installa i pacchetti mesa ...la contengono ... ciao francesco
[newbie-it] swapon
Ciao a tutti, veramente vi ho gia mandato questa e-mail ma non ho ricevuto risposte. Cmq. il mio problema e questo: ho avviato linux (viene avviato in modalità testo) ed ho ricevuto questo errore: -- Attivo le partizioni di swap: swapon /dev/hda9: invalid argument -- FALLITO -- -- The superblock could not be read or does not describe -- a correct ext2 filesystem. -- If the device is valid and it really contains an ext2 filesystem -- (and not swap or ufs or something else), then the superblock -- is corrupt, and you might try running e2fsck whid an -- alternate superblock: -- e2fsk -b 8193 device -- fsck.ext2: Bad magic number in super_block while -- trying to open /dev/hda10 -- Failed to check filesystem. La situazione del mio disco è la seguente: La prima partizione e primaria con win2000 e poi a seguire ho una partizione estesa con dentro 6 partizioni logiche, le part. F,G,H sono fat32. linux--swap--linux--F:--G:--H:-- fino ad oggi è andato sempre tutto bene, oltretutto dopo che ho ricevuto l'errore posso entrate nella shell come root ma se vado nella cartella /home non trovo + niente. Le cartelle degli user ed i loro dati sono sparite, come mai? come posso risolvere il problema considerando anche che sono una spina? Grazie mille a tutti e soprattutto a chi avrà la pazienza di rispondermi. Ciao
Re: [newbie-it] Touchpad portatile
Alle 01:34, giovedì 23 gennaio 2003, Marco Balzarini ha scritto: Ciao a tutti, mi sono iscritto da poco (oggi pomeriggio) ed avrei una domandina da fare... Ho dei problemi a far riconoscere il Touchpad del mio portatile (Dell Inspiron 5000, le caratteristiche sono in firma) a Linux. Al momento ho installato la Mandrake 9.0 ma il problema era lo stesso con la RedHat 8.0 che avevo installato fino a qualche giorno fa. nella configurazione del kernel (2.4.19mdk che è nella 9.0) in general setup c'è la voce Dell laptop support, credo che di norma venga configurato come modulo, quindi ti conviene andare a dare un'occhiata alla documentazione sui moduli... non ricordo però in quale directory è... acc. In alternativa puoi attivare tale voce nella ricompilazione del kernel e vedere che succede... Ciao
Re: [newbie-it] Partizioni
Alle 02:04, mercoledì 22 gennaio 2003, Santarella Benedetto ha scritto: 7^ Usare Partition Magic! Visto che ridurre Win è il passaggio più semplice, disk drake, fips, fdisk (non sono sicuro), fanno il lavoro Con Partition Magic riesco ad espandere le partizioni linux già esistenti, senza doverle per forza cancellare? grazie a tutti, ciao
[newbie-it] scheda audio e modem notebook
ho da poco installato mandrake 9.0 su un texas con 200mmx e 32 di ram. ma non riesco a intastallare la scheda audio. chiedo solo quali sono le applicazione del kde3.0 da smanettare. inoltre mandrake, nonostante le sue magie, non riesce a trovarmi il modem integrato su un altro portatile - un toshiba satellite di qualche mese fa. confido nella community! p.s.: la batteria del mio texas ha sei anni di vita e con winzozzo moriva dopo non più di due o tre minuti. beh, non ci crederete, ma con mandrake arriva a quasi un'ora. davvero incredibile. saluti __ Yahoo! Cellulari: loghi, suonerie, picture message per il tuo telefonino http://it.yahoo.com/mail_it/foot/?http://it.mobile.yahoo.com/index2002.html
Re: [newbie-it] Sicurezza
On Thu, 23 Jan 2003, Paolo Tomiato wrote: Se l'IP fosse assegnato dinamicamente avrebbe senso lo stesso denunciarlo alla polizia postale? In verita' io sono contrario a procedere con una denuncia per vari motivi: Siamo un po' off-topic, ma credo che ognuno si debba assumere le proprie responsabilita' almeno morali, indipendentemente dall'eta', incluso il bambino scemino. Prescindendo dal fatto che la denuncia sia un suo diritto come persona offesa da reato, concordo che forse non sia il caso di procedere in sede penale (che sarebbe cmq senz'altro auspicabile in casi di palese gravita' o reiterazione), ma di certo sarebbe ottima cosa segnalare dettagliatamente il fatto al provider del tizio, affinche' provveda alle verifiche necessarie e prenda i provvedimenti conseguenti, ove il comportamente sia doloso; in caso di semplice negligenza colposa del tizio propenderei cmq per avvertire il provider perche' possa sollecitare l'interessato a mettere una pezza al suo sedicente s.o. colabrodo. Mi piacerebbe piuttosto capire come potrei contattare questo ipotetico cracker, Non e' legalmente possibile ... e, a scanso di equivoci, chiunque, essendo a conoscenza dell'associazione tra l'IP e la persona fisica relativa (essenzialmente il provider e il gestore telefonico), te lo comunicasse indebitamente si esporrebbe a conseguenze poco piacevoli ... -- GNU/Linux Slackware 9.0beta1 ** k 2.4.20-acpi+preempt+lowlat+pktwrt Ma se si puo' essere spiati da internet a PC spento, com'e' che non riesco a lavorarci sconnesso dalla rete elettrica? ... *SBONK* #-)
[newbie-it] Script per init 6 con aggiunte
Ho bisogno di creare uno script che faccia tre cose 1) init 6 2) lilo con opzione linux (meglio se in modalità single) 3)init 0. ho provato con: init 6:lilo;linux:init 0 ma non funziona esegue subito init 0! eppure avevo uno script tipo init 6:lilo;win che lanciava Windows ma ora non funziona cosa ho sbagliato? Chi mi puo aiutare!
[newbie-it] scheda video ATI Rage 128 Pro
Ho comperato la scheda video in oggetto, vecchiotta, perché costava poco e perché non ho bisogno di grandi prestazioni; ho avuto qualche difficoltà a farla funzionare con linux, ma dopo aver modificato opportunamente (secondo indicazioni trovate in internet) il file /etc/X11/XF86Config-4 riesco ad avviare il server X dignitosamente. Rimangono due punti non sistemati, forse collegati tra loro: - quando lancio startx ottengo i seguenti messaggi d'errore: (EE) R128(0): No DFP detected Symbol drmFreeBufs from module /usr/X11R6/lib/modules/drivers/r128_drv.o is unresoveld Symbol drm128TextureBlit from module /usr/X11R6/lib/modules/drivers/r128_drv.o is unresoveld Symbol drmFreeBufs from module /usr/X11R6/lib/modules/drivers/r128_drv.o is unresoveld - da mandrake control center porto la profondità di colore a 24 bit, do OK, riavvio KDE, e quella torna da sola a 16 bit. La scheda in realtà ce la farebbe tranquillamente a reggere la massima risoluzione a 24 bit. Uso mdk 8.2 (kernel 2.4.18); dei messaggi non ho capito niente. So solo che r128 è il nome del driver appropriato alla scheda video. Se qualcuno sapesse darmi una dritta mi farebbe un piacere. Ciao Giorgio
Re: [newbie-it] swapon
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Alle 18:00, mercoledì 22 gennaio 2003, Gaetano ha scritto: --Attivo le partizioni di swap: swapon /dev/hda9: invalid argument fino ad oggi è andato sempre tutto bene, oltretutto dopo che ho ricevuto l'errore posso entrate nella shell come root ma se vado nella cartella /home non trovo + niente. Le cartelle degli user sono sparite, come mai? mandaci il contenuto di #f disk -l e di /etc/fstab la home potrebbe essere in una partizione che non viene montata per lo swap idem (circa..) per caso hai usato di recente partition magic? Ciao bye miKe - -- Slackware 8.1 GNU/Linux 2.4.20 @ hp Xe3 R.U.#219755 -- S.R.U.#705 -- R.M.#110932 -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE+LxH/F/9fksDJ4y0RAjTWAJ45qPVphVnvrvlMLmoV6YLYS2V+LwCeP1QN KYTKfYTsZgHJno0Y9y+tHWE= =5Fsx -END PGP SIGNATURE-
[newbie-it] funzionava tutto bene
Da una settimana ero riuscito (grazie soprattutto ai consigli della lista) a configurare in maniera decente linux. l'unico problema era che il kde doveva essere avviato 2 volte per funzionare con ctrl-alt-back. dopo aver modificato parecchie periferiche, ho spostato la partizione swap da un hd all'altro ed eliminato una partizione temporanea usando il tool grafico nel mandrake control center. ora in hda ho la partizione windows e in hdb ho 3 partizioni, una fat32, una swap e la /, mentre prima avevo hda una fat 32, una swap e una /archivio hdb una fat 32, e la / riavvio e ottengo can't find ext3 filesystem on dev ide0(3,69) error 22 mounting ext3 flags freeing unused kernel memory 136K freed kernel panic no init found try passing init= option to kernel. ho provato con fdisk con la console testuale del cd1 di mandrake e nella tabella delle partizioni mi dà un errore di allocazione oltre il numero massimo di clusters consentiti; secondo fdisk del dos ho solo una partizione primaria per tutto l'hard disk, partition magic mi dà sul slave primario nessuna partizione (disco vergine) la partizione hd6 è perfettamente leggibile usando la console testuale del cd1mdk. dato che non vorrei perdere nè le configurazioni, nè gli aggiornamenti eseguiti dopo aver portato il pc da un amico che ha l'adsl, vorrei poter ricostruire il tutto senza danni, o almeno fare un backup completo per ripristinare tutti i files dopo un'eventuale riformattazione e ripartizione. che devo fare?
Re: [newbie-it] swapon
Alle 22:51, mercoledì 23 gennaio 2003, miKe ha scritto: mandaci il contenuto d i # fdisk -l questo comando parte ma purtroppo non mi da nessun risultato, ho provato con: cfdisk -P hda non so se è lo stesso cmq. mi dice: hda1 primaria NTFS hda5 logica linux ext2 hda6 logica linux swap hda7 logica linux ext2 hda8 logica Win95 fat32 hda9 logica Win95 fat32 hda10 logica NTFS e di /etc/fstab il contenuto di fstab l'ho inserito nel file allegato per caso hai usato di recente partition magic? no, lo solo avviato per vedere una cosa ma non ho fatto nessuna operazione Altro problema riscontrato e che non avevo più il floppy montato, per accedervi l'ho dovuto rimontare (in realtà non l'avevo mai montato perchè dal giorno dell'installazione ha sempre funzionato). Perchè? ciao e grazie. /dev/hda5 / ext2 noatime 1 1 none /dev/pts devpts mode=0620 0 0 /dev/hda10 /home ext2 noatime 1 2 /mnt/cdrom /mnt/cdrom supermount fs=iso9660,dev=/dev/cdrom 0 0 /mnt/floppy /mnt/floppy supermount fs=vfat,dev=/dev/fd0 0 0 /dev/hda6 /mnt/win_c vfat user,exec,umask=0,codepage=850,iocharset=iso8859-1 0 0 /dev/hda7 /mnt/win_d vfat user,exec,umask=0,codepage=850,iocharset=iso8859-1 0 0 none /proc proc defaults 0 0 /dev/hda9 swap swap defaults 0 0
Re: [newbie-it] scheda audio e modem notebook
- Original Message - From: karkade' [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, January 23, 2003 7:12 PM Subject: [newbie-it] scheda audio e modem notebook ho da poco installato mandrake 9.0 su un texas con 200mmx e 32 di ram. ma non riesco a intastallare la scheda audio. chiedo solo quali sono le applicazione del kde3.0 da smanettare. non conosci la marca o il chip? inoltre mandrake, nonostante le sue magie, non riesce a trovarmi il modem integrato su un altro portatile - un toshiba satellite di qualche mese fa. idem come sopra, ma potrebbe essere un winmodem confido nella community! p.s.: la batteria del mio texas ha sei anni di vita e con winzozzo moriva dopo non più di due o tre minuti. beh, non ci crederete, ma con mandrake arriva a quasi un'ora. davvero incredibile. ovvio, visto che con winzozz il processore consuma al massimo anche quando non elabora: secondo me bill gheizz guida l'auto mettendo l'acceleratore fisso al massimo e regolando la velocità con freno e frizione saluti ciao e complimenti per il nick: è una delle mie bevande preferite __ Yahoo! Cellulari: loghi, suonerie, picture message per il tuo telefonino http://it.yahoo.com/mail_it/foot/?http://it.mobile.yahoo.com/index2002.h tml
[newbie-it] Ormai discussione [ot] su Appuntilinux e abitudini
Alle Thursday 23 January 2003 13:04, a proposito di Re: [newbie-it] Appuntilinux (e chissa' a cosa pensava veramente), syd ha scritto: Vabbe', ti perdono. Meno male. Ti passo anche questa E un'altra fatta. Terzo: la mia velocita' nella ricerca dati con il PC non e' la stessa che con un bel volume sottomano. Impara a fare le ricerche con il pc A parte il fatto che se ricerco un file di cui conosco il nome e - grossomodo - la locazione il mio PC me lo trova in cinque minuti; se gli dico cerca il testo nel file posso anche aspettare una mezza giornata. Davvero potrei ottimizzare, infatti era la scusa numero tre... Maddai! E' solo questione di abitudine, e di modo di fare. Considerando il depauperamento del patrimonio forestale credo che alcune abitudini sia necessario includerle tra quelle cattive. Fosse solo per il depauperamento, ti direi subito: piuttosto che vedere kg di carta utilizzabile buttata via stampo... almeno a qualcosa e' utile. E' molto diffcile che io stampi qualcosa su fogli bianchi; a meno che non si tratti di documenti ufficiali utilizzo (anche per scrivere e fare due conti) sempre fogli parzialmente usati. Pensa che accade spessissimo che io mi stampi perfino le mail... ;-) Ecco, vedi.. la degenerazione. Mi sembra un po' troppo. Mmmm... se le stampo, non le butto: vuol dire che hanno contenuti che mi interessano in modo particolare. Per esempio le istruzioni per installare una data cosa (per quanto riguarda le mail di questa ML), oppure discussioni su testi (in genere di fantascienza) che so che riutilizzero' per analizzare qualche racconto o qualche romanzo, magari discutendo a quattr'occhi a cena con degli amici. Alla fine tutto e' archiviato e facilmente recuperabile per l'uso. Sia chiaro Arwan, ognuno fa come vuole e fino a quando mi parli di esigenze fisico-tecniche come le prime due che hai indicato sarebbe da pazzi obiettare. Fiiiu D'altra parte se mi avessi parlato solo di abitudini e di modi di fare... no, non avrei compreso. Be', come ti ho scritto le abitudini di cui parlavano derivano in fondo da altre esigenze tecniche... ;-) Conosco molte persone che stampano inutilmente; per dirla giusta, la maggior parte di quelli che conosco stampano solo per abitudine a leggere sulla carta. In me c'e' una buona parte di abitudine a leggere sulla carta, ma penso che sarebbe in parte stata debellata se non fosse per le prime due esigenze... la terza e' un corollario per non rendere un vizio vano, anche ai miei occhi. Ti sembrero' esagerato ma uno degli aspetti che piu' mi affascinarono quando conobbi il mondo linux fu proprio quello della gestione intelligente delle risorse, dell'approccio all'uso consapevole dei mezzi informatici... Dammi tempo,, io qui ci sono da poco... -- Arwan
Re: [newbie] Native Linux app Comparable to Quickbooks pro?
On Wed, 22 Jan 2003 17:37, Chuck Burns wrote: I wish to see about converting a friend of mine to linux, but he uses quickbooks pro, and I don't know the names of any comparable *nix applications, that would also read his current quickbooks stuff. Anyone have any suggestions? I use quasar (from http://www.linuxcanada.com) which is very similar to MYOB, however I don't think data can be imported from quickbooks. The Quasar base package is available for use on a single computer free of charge. I found quasar much easier to use than gnucash - mainly because gnucash is strictly double-entry. Quasar is excellent software AFAIAC! Cheers Sharrea -- Help Microsoft stamp out piracy - give Linux to a friend today Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Star Office beats me
On Thursday 23 Jan 2003 3:33 am, erylon hines wrote: On Wednesday 22 January 2003 06:47 am, you wrote: The spontaneous logouts were causing havoc in my file, as every backup was resulting in yet another corrupted file - at least that's what it looks like. Are you backing up to another machine over a network? I had a bad NIC that caused spontaneous reboots--took me a month to figure out what hardware was doing it. I found that I could get the behavior almost always if I transferred files across the network. Sometimes I could even reboot my machine by transferring files to it from another workstation. I think you have a hardware problem--not software. Bad memory, bad NIC, something. Not nic, I think - network is no problem, even for big files. But hardware, yes, I think it must be. Am investigating. Anne -- Registered Linux User No.293302 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] /dev/dsp warning message
The few times I heard about this problem of /dev/dsp being busy, the finger was pointed to this aRts thing being the cause of problems. But I forgot the details. Ed -Oorspronkelijk bericht- Van: Damian Gatabria [mailto:[EMAIL PROTECTED]] Verzonden: woensdag 22 januari 2003 16:47 Aan: [EMAIL PROTECTED] Onderwerp: Re: [newbie] /dev/dsp warning message On Wednesday 22 January 2003 18:27, John Richard Smith wrote: Every time I boot up I get a warning message in a terminal, /dev/dsp: Device or resource busy How can I check what is keeping the device busy. What can I do about it. John At which stage of the boot process do you get this? Damian Disclaimer Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is uitsluitend bestemd voor de geadresseerde. Als u dit bericht per abuis hebt ontvangen, wordt u verzocht het te vernietigen en de afzender te informeren. Wij adviseren u om bij twijfel over de juistheid of de volledigheid van de mail contact met afzender op te nemen. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] $$$$$$$$$$ TONY BLAIR is a BUSH LACKEY $$$$$$$$$$$$$
-- Your favorite stores, helpful shopping tools and great gift ideas. Experience the convenience of buying online with Shop@Netscape! http://shopnow.netscape.com/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Internet security Mandrake 9.0
I installed Mandrake 9.0 on my PC, that is connected to my internet provider via an ADSL USB modem. I don't have a network, just a simple PC. The security level was put to 'high' during installation, but I don't know at all to what extend I am protected against what. But I am online during many hours a day and I guess hat this makes security more and more important. I delved through many internet pages dealing with firewall and security information but they very often deal with setting up a firewall for computer on a network. Does anyone know where to find information about configuring security on a single PC? Ed Vaessen Disclaimer Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is uitsluitend bestemd voor de geadresseerde. Als u dit bericht per abuis hebt ontvangen, wordt u verzocht het te vernietigen en de afzender te informeren. Wij adviseren u om bij twijfel over de juistheid of de volledigheid van de mail contact met afzender op te nemen. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] FW: RPM : Accessing Installed Packages
Thanks to Stephen Kuhn, Derek Jennings and et (and anyone else whose email I might have missed) for providing valuable insights into installing and launching rpm applications. Regards John -Original Message- From: Sendak, John Sent: 22 January 2003 12:19 To: '[EMAIL PROTECTED]' Subject:RPM : Accessing Installed Packages Mandrake 9.0 Hi As I understand it, rpm's can only be installed when logged in as root. I have installed packages as root, using the GUI RPM facility i.e. left click the rpm. They appear to have installed correctly and I can see them in the list of installed software i.e. in the alphabetical list of software in the Remove Software window of the Mandrake Control Centre. However, when I try to start them using the application toolbar, they are not there e.g. * Texmacs is apparently installed under RPM/Applications/Editors, but does not appear in the list of editors, * Macaulay2 installs under RPM/Engineering, but Engineering is not even in the list of applications Why is this and how do I access the packages ? Regards John Sendak ___ Confidentiality Notice This email (and any attachment) is intended only for the attention of the addressee. Its unauthorised use, disclosure, storage or copying is not permitted. If you are not the intended recipient, please destroy all copies and inform the sender by return email. Thank you This email has been scanned for all viruses by the MessageLabs SkyScan service. For more information on a proactive anti-virus service working around the clock, around the globe, visit http://www.messagelabs.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] Internet security Mandrake 9.0
Do a search on google, there are tons of tutorials on IPTables. A good place to start is www.netfilter.org or http://www.linuxguruz.org/iptables/ Rob -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Vaessen, E.M.J. (Ed) Sent: Thursday, January 23, 2003 3:58 AM To: '[EMAIL PROTECTED]' Subject: [newbie] Internet security Mandrake 9.0 I installed Mandrake 9.0 on my PC, that is connected to my internet provider via an ADSL USB modem. I don't have a network, just a simple PC. The security level was put to 'high' during installation, but I don't know at all to what extend I am protected against what. But I am online during many hours a day and I guess hat this makes security more and more important. I delved through many internet pages dealing with firewall and security information but they very often deal with setting up a firewall for computer on a network. Does anyone know where to find information about configuring security on a single PC? Ed Vaessen Disclaimer Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is uitsluitend bestemd voor de geadresseerde. Als u dit bericht per abuis hebt ontvangen, wordt u verzocht het te vernietigen en de afzender te informeren. Wij adviseren u om bij twijfel over de juistheid of de volledigheid van de mail contact met afzender op te nemen. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] kpackage
Hi Mandrake 9.0 As a user, I appear to have access to kpackage only in a limited way i.e. I can open an rpm with it. As root, however, I have complete access to kpackage i.e. I can open kpackage and see a list of all rpm's installed, by using a menu arrow in the toolbar at the foot of the desktop. I cannot see the equivalent menu as a user. Is the full kpackage available to a user, and, if so, how do I make it available and launch it. Regards John ___ Confidentiality Notice This email (and any attachment) is intended only for the attention of the addressee. Its unauthorised use, disclosure, storage or copying is not permitted. If you are not the intended recipient, please destroy all copies and inform the sender by return email. Thank you This email has been scanned for all viruses by the MessageLabs SkyScan service. For more information on a proactive anti-virus service working around the clock, around the globe, visit http://www.messagelabs.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Openoffice printing with Lexmark Z25
I have set up a friend with MD 9.0 and a Lexmark Z25 printer, the printer needs Lexmark drivers and is not compatible with CUPS and requires the use of LPR, I managed to get this set up and printing both BW Colour form other apps but I cannot get it to print using OpenOffice. A print job appears to have been accepted but the printer does nothing and nothing is in the queue, It is essential that my friend be able to open and print Word docs which is why OpenOffice was installed. I have googled and looked at archives to no avail, any ideas please ? -- http://www.poogle.co.uk Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Memoryleakage in 8.2?
Hello friends, I am experiencing some problem with my Mandrake box at work, I am using XFCE. When I rebooted 1,5 hour ago it was about 80 MB free Memory and no swap used. This was after I have started Sylpheed only. Now 1,5 hour later I have started and closed KNode down, and now I have only 4 MB free and over 20 MB of swap in use. Could somebody tell me if there is a memoryleakage known in 8.2? I am on the verge on installing FreeBSD on this machine anyway, but this made the transitiondecision easier Best Regards, Anders Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] Memoryleakage in 8.2?
I'm using XFCE on a 9.0 box, but have run it on 8.2 and never noticed any mem issues. It's always seemed very light. This machine only has 48MB RAM, so it has to be for me. Have you run 'top' and then sorted by mem usage? That'll tell ya what's sucking up the memory. ~Brandon http://www.vanderberg.net -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Anders Lind Sent: Thursday, January 23, 2003 2:59 AM To: [EMAIL PROTECTED] Subject: [newbie] Memoryleakage in 8.2? Hello friends, I am experiencing some problem with my Mandrake box at work, I am using XFCE. When I rebooted 1,5 hour ago it was about 80 MB free Memory and no swap used. This was after I have started Sylpheed only. Now 1,5 hour later I have started and closed KNode down, and now I have only 4 MB free and over 20 MB of swap in use. Could somebody tell me if there is a memoryleakage known in 8.2? I am on the verge on installing FreeBSD on this machine anyway, but this made the transitiondecision easier Best Regards, Anders Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Memoryleakage in 8.2?
On Thu, 23 Jan 2003 03:10:21 -0800 Brandon Vanderberg [EMAIL PROTECTED] wrote: I'm using XFCE on a 9.0 box, but have run it on 8.2 and never noticed any mem issues. It's always seemed very light. This machine only has 48MB RAM, so it has to be for me. Have you run 'top' and then sorted by mem usage? That'll tell ya what's sucking up the memory. Yeah I have run top, I think I saw what was the problem, for some reason Sylpheed snatched 93 MB of RAM. After restarting it it behaves much better, but now that I have 94 MB of RAM free, still 3,1 MB of swap is used. /Anders Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] /dev/dsp warning message
Thanks, Ed, Certainly, If I disable aRTS and reboot I no longer get the /dev/dsp: Device or resource busy message, but I also loose the use of several sound devices that uses aRts to manage the sound streams. Which is a negative developement. Now I ran, artsdsp -help /usr/bin/artsdsp: line 108: exec: -h: invalid option exec: usage: exec [-cl] [-a name] file [redirection ...] So I went to usr/bin/artsdsp, and this is how it is set up, note line 108 is the last line !/bin/sh # artsdsp - wrapper script to allow *some* binary only programs to use artsd # based on the esddsp script # keep this in sync with artsversion.h version=1.0.3 # default values for script variables verbose=0 set_name=0 single_thread=0 # check for artsdsp options while test $# -gt 0; do case $1 in -h|--help) echo artsdsp - attempt to reroute audio device to artsd echo echo artsdsp [options] application arguments echo echo options: echo -h, --helpshow brief help echo -n, --name=NAME use name to identify player to artsd echo -m, --mmapemulate memory mapping (i.e. for quake) echo -s, --single-threaded use the single-threaded version echo -v, --verbose show parameters echo -V, --version show version exit 0 ;; -n) shift if test $# -gt 0; then export ARTSDSP_NAME=$1 else echo no player name specified exit 1 fi shift set_name=1 ;; --name*) export ARTSDSP_NAME=`echo $1 | sed -e 's/^[^=]*=//g'` set_name=1 shift ;; -v|--verbose) verbose=1 shift ;; -V|--version) echo artsdsp $version exit ;; -m|--mmap) export ARTSDSP_MMAP=1 shift ;; -s|--single-threaded) single_thread=1 shift ;; *) # no more artsdsp options, get on with life break ;; esac done # echo options if verbose specified if test $verbose = 1; then ARTSDSP_VERBOSE=1 export ARTSDSP_VERBOSE echo artsdsp: $version echo name: $ARTSDSP_NAME echo command line: $@ if test $single_thread = 1; then echo threaded: no else echo threaded: yes fi fi # setup artsdsp preload to hijack calls made to /dev/dsp prefix=/usr exec_prefix=${prefix} libdir=/usr/lib if test $single_thread = 1; then LD_PRELOAD=${libdir}/libartsdsp_st.so.0 else LD_PRELOAD=${libdir}/libartsdsp.so.0:${libdir}/libartsc.so.0 fi if test -f /lib/libdl.so.2; then LD_PRELOAD=$LD_PRELOAD:/lib/libdl.so.2 fi export LD_PRELOAD # invoke the program with the args given exec $@ This looks like a bash script to manage sRts daemon or device to me, but not being able to read bash scripts I don't know what to do to alter things. Perhaps someone with more knowledge than me could advise ! John Vaessen, E.M.J. (Ed) wrote: The few times I heard about this problem of /dev/dsp being busy, the finger was pointed to this aRts thing being the cause of problems. But I forgot the details. Ed -Oorspronkelijk bericht- Van: Damian Gatabria [mailto:[EMAIL PROTECTED]] Verzonden: woensdag 22 januari 2003 16:47 Aan: [EMAIL PROTECTED] Onderwerp: Re: [newbie] /dev/dsp warning message On Wednesday 22 January 2003 18:27, John Richard Smith wrote: Every time I boot up I get a warning message in a terminal, /dev/dsp: Device or resource busy How can I check what is keeping the device busy. What can I do about it. John At which stage of the boot process do you get this? Damian -- John Richard Smith [EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Memoryleakage in 8.2?
On Thursday 23 Jan 2003 10:58 am, Anders Lind wrote: Hello friends, I am experiencing some problem with my Mandrake box at work, I am using XFCE. When I rebooted 1,5 hour ago it was about 80 MB free Memory and no swap used. This was after I have started Sylpheed only. Now 1,5 hour later I have started and closed KNode down, and now I have only 4 MB free and over 20 MB of swap in use. Could somebody tell me if there is a memoryleakage known in 8.2? I am on the verge on installing FreeBSD on this machine anyway, but this made the transitiondecision easier Best Regards, Anders And how much memory is cached? Do not forget that Linux will use almost all available physical memory as hard disc cache. Swap usage is only significant if it is forever moving processes in and out of swap. derek -- -- www.jennings.homelinux.net Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] strange network slow down
On Thu, 23 Jan 2003 05:03, qhwang wrote: I don't know whether this is a discussed problem here. My laptop suffers from strange network slow down recently. The switch shows my network card is a 100 MB one but when I download something the bandwidth is about several hundreds bytes per second, while other computer in the same lab around 10 KB/s. My laptop worked well weeks ago. I install a Madrake 8.1 within my laptop. How could I fix it? Many thanks. QingHua. Make sure you have the correct entries for each host in /etc/hosts. Incorrect entries here can cause the network to slow down considerably. Other than that, hopefully someone more knowledgeable on networks can help you with this one. Sharrea -- Help Microsoft stamp out piracy - give Linux to a friend today Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Toshiba laptop installation problems
The L99 99 99 99 99 99 might be lilo or what you use as a boot manager Have you try http://www.linux-laptop.net to see if anyone has had this problem to. On Thursday 23 Jan 2003 4:25 am, Marc Oestreicher wrote: I submitted a question to the list earyler today, THANKS for the helpfull replies folks. However the plot now thickens. After many attempts I could still not get the laptop to run more than a couple of miniuts in 9.0 although earyler in the day it had done ok in windoze. I finnally gave up and tried to install 8.1 , after I got a bit better than half way done it had a problem reading reading the CD, after a couple attempts at cleaning the cd the cd drive refused to open and I stoped the installation and went to reboot to windoze and was met with new fun and games. I got the same old message as always reading Toshiba corp bla bla bla Memory initalize 81664 KB followed by L99 99 99 99 99 99 99 99 99 , about a half screen of this stuff and then it refused to proceed any further with the boot process. I have never seen a screen like this but my best guess is some bad memory may have caused the problems earyler with 9.0 and perhaps the installation of 8.1 Does this sound about right to you folks? Do I have a bad stick of memory? Sorry I did not quote any of the old message but I am afraid all that email is stuck in the old laptop. Thanks Marc Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] kpackage
On Thursday 23 Jan 2003 10:10 am, Sendak, John wrote: Hi Mandrake 9.0 As a user, I appear to have access to kpackage only in a limited way i.e. I can open an rpm with it. As root, however, I have complete access to kpackage i.e. I can open kpackage and see a list of all rpm's installed, by using a menu arrow in the toolbar at the foot of the desktop. I cannot see the equivalent menu as a user. Is the full kpackage available to a user, and, if so, how do I make it available and launch it. Regards John This not the quite the answer to your question but :- KPackage is the default app which opens when you click on an RPM to install it. However it is quite slow and clumsy, and is not able to resolve any dependencies the RPM has. There is a better application called gurpmi which is smaller faster, and most importantly *will* resolve dependencies. To make gurpmi the default package installer in KDE open KDEControlCentreFileInformationFileAssociations Type rpm in the search box and highlight the 'x-rpm' item which then appears. In the right hand pane highlight 'Software Installer' and click 'Move Up' until it is top of the list. Click 'Apply' and you are done. HTH derek BTW: If Kpackage is missing from your user menu. It may be because you have selected customised menus for your user. Open KmenuConfigurationOtherMenudrake and menudrake will open in user mode. Click on 'Menu Style' and select 'System settings' You should then see the same menu items as root. -- -- www.jennings.homelinux.net Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Internet security Mandrake 9.0
On Thursday 23 Jan 2003 9:58 am, Vaessen, E.M.J. (Ed) wrote: I installed Mandrake 9.0 on my PC, that is connected to my internet provider via an ADSL USB modem. I don't have a network, just a simple PC. The security level was put to 'high' during installation, but I don't know at all to what extend I am protected against what. But I am online during many hours a day and I guess hat this makes security more and more important. I delved through many internet pages dealing with firewall and security information but they very often deal with setting up a firewall for computer on a network. Does anyone know where to find information about configuring security on a single PC? Ed Vaessen This is a good place to start. http://www.mandrakesecure.net/en/docs/msec.php http://www.mandrakelinux.com/en/doc/90c/en/Server_Conf_Guide.html/security.html For a desktop system 'High' is probably too high a security level. You will find the system will not let you do what appears to be innocent things. If you are coming from the Windows world 'Standard' security is already much higher than you had before. derek -- -- www.jennings.homelinux.net Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Sources Manager still an issue
On Thursday 23 Jan 2003 5:20 am, Robert Wideman wrote: OK OK OK I finally got everything working. The final error from the previous emaili had to just do the following: # touch /var/lib/urpmi/compssUsers.flat At this point everything started working until i started DLing and installing, then i got an error that a directory didnt exist. So i just looked at my laptop at /var/cache/urpmi and it had partial/ rpms/ and headers/ so i just created them and it worked from that point on. Thanks Derek for all your help and patience, same to the others who helped as well. Rob Whoop di woo I was getting worried about that one :) I remember getting into a similar pickle when I tried editing the sources file by hand with 8.1 You know what they say - If your Linux ain't broken- You are not trying hard enough derek -- -- www.jennings.homelinux.net Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Internet security Mandrake 9.0
Ed said: I installed Mandrake 9.0 on my PC, that is connected to my internet provider via an ADSL USB modem. I don't have a network, just a simple PC. The security level was put to 'high' during installation, but I don't know at all to what extend I am protected against what. But I am online during many hours a day and I guess hat this makes security more and more important. I delved through many internet pages dealing with firewall and security information but they very often deal with setting up a firewall for computer on a network. Does anyone know where to find information about configuring security on a single PC? Setting msec to high is a good first step, but you need to make sure shorewall is on also. You'll find it under Security in the Mandrake Control Center. For more info on security check out MandrakeUser (http://www.mandrakeuser.org/docs/index.html). -- Anthony Abby - http://www.aplusdata.com Comic Book Community News| Web Programming Inventory and Management System | Cold Fusion PHP ASP Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Native Linux app Comparable to Quickbooks pro?
On Thu, 2003-01-23 at 19:28, Sharrea wrote: have any suggestions? I use quasar (from http://www.linuxcanada.com) which is very similar to MYOB, however I don't think data can be imported from quickbooks. The Quasar base package is available for use on a single computer free of charge. I found quasar much easier to use than gnucash - mainly because gnucash is strictly double-entry. Quasar is excellent software AFAIAC! Cheers Sharrea Hsimilar to MYOB? I might have to ditch MYOB...getting sick of the updates/upgrades...and it's clunky...and it runs under Windblows... (Then I'll be down to TWO apps that I have to run under M$ - Photoshop and Illustrator) -- Thu, 23 Jan 2003 23:35:00 +1100 11:35pm up 7 days, 9:18, 4 users, load average: 0.02, 0.72, 1.41 -- |____ | kuhn media australia| | / ,, /| |'-. | http://kma.0catch.com | | .\__/ || | | |=| | _ / `._ \|_|_.-' | stephen kuhn| | | / \__.`=._) (_ | email: [EMAIL PROTECTED] | | |/ ._/ || | email: [EMAIL PROTECTED]| | |'. `\ | | |icq: 5483808 | | ;/ / | | | | | smk ) /_/| |.---.| | mobile: 0410-728-389| | ' `-`' | Berkeley, New South Wales, AU | -- linux user:267497 * RH 8.0 * PC/Mac/Linux/Networking/Consulting -- How to make a million dollars: First, get a million dollars. -- Steve Martin Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Openoffice printing with Lexmark Z25
On Thu, 2003-01-23 at 21:25, Poogle wrote: I have set up a friend with MD 9.0 and a Lexmark Z25 printer, the printer needs Lexmark drivers and is not compatible with CUPS and requires the use of LPR, I managed to get this set up and printing both BW Colour form other apps but I cannot get it to print using OpenOffice. A print job appears to have been accepted but the printer does nothing and nothing is in the queue, It is essential that my friend be able to open and print Word docs which is why OpenOffice was installed. I have googled and looked at archives to no avail, any ideas please ? If the printer is available in KDE Control Centre, you can send the print job to kprinter - so, like in my OO setup, my printer is defined as: kprinter --stdin ...works like a charm! -- Thu, 23 Jan 2003 23:40:01 +1100 11:40pm up 7 days, 9:23, 4 users, load average: 0.08, 0.31, 1.03 -- |____ | kuhn media australia| | / ,, /| |'-. | http://kma.0catch.com | | .\__/ || | | |=| | _ / `._ \|_|_.-' | stephen kuhn| | | / \__.`=._) (_ | email: [EMAIL PROTECTED] | | |/ ._/ || | email: [EMAIL PROTECTED]| | |'. `\ | | |icq: 5483808 | | ;/ / | | | | | smk ) /_/| |.---.| | mobile: 0410-728-389| | ' `-`' | Berkeley, New South Wales, AU | -- linux user:267497 * RH 8.0 * PC/Mac/Linux/Networking/Consulting -- It's not enough to be able to pick up a sword. You have to know which end to poke into the enemy. (Lords and Ladies) Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] GNU readline library
Hello, I'm trying to compile the rlterm program working with the GNU readline libraries. As a real newbie in compiling issue, I don't understand the the problem which is happening. I have got the GNU readline 4.3 package installed on my computer. Rlterm requires libreadline.a which doesn't seem to exist for Mandrake. Is it however necessary to have this particular file or is possible to replace the libreadline.a library with one of the GNU readline package ? If anyone has an idea, I would greatly appreciate. I join the Makefile program. thanks a lot, Fred # replace this with the directory containing libreadline.a # or blank if libreadline.a is visible to your compiler LIBDIR = -L/home/munro/readline-2.0 # The following switches may be necessary in order for rlterm.c to # find termio and signal headers on your system: # -DUSE_TERMIOS to use termios.h (otherwise termio.h) # -DUSE_SYS_TERMIO to use sys/termio.h or sys/termios.h # -DPOSIX_TERMIO to use tc.etattr instead of ioctl (implies USE_TERMIOS) # -DNO_SIGACTION if no sigaction or it doesn't take SA_NOCLDSTOP flag RLDEFS = LIBS = -lreadline -ltermcap ALLFLAGS = $(CFLAGS) $(LDFLAGS) $(DEFS) $(RLDEFS) rlterm: rlterm.c $(CC) $(ALLFLAGS) rlterm.c ${LIBDIR} ${LIBS} -o rlterm clean:: rm -f rlterm *~ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mozilla - SSL ?
On Wednesday 22 Jan 2003 10:49 pm, Can Baytan wrote: Disabling FIPS from prefs- security- certificates from Mozilla solved the problem both in Netscape and Mozilla, FYI, happy homebanking. Can, under prefs security certificates I only have select automaticall and ask every time Is this a different version from yours? Mine is 1.1. I keep finding that things are in different places on different installations, so I don't know whether they are different versions, or whether some other factor affects it (such as having Netscape installed at the same time). Anne -- Registered Linux User No.293302 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Memoryleakage in 8.2?
On Thu, 2003-01-23 at 21:58, Anders Lind wrote: Hello friends, I am experiencing some problem with my Mandrake box at work, I am using XFCE. When I rebooted 1,5 hour ago it was about 80 MB free Memory and no swap used. This was after I have started Sylpheed only. Now 1,5 hour later I have started and closed KNode down, and now I have only 4 MB free and over 20 MB of swap in use. Could somebody tell me if there is a memoryleakage known in 8.2? I am on the verge on installing FreeBSD on this machine anyway, but this made the transitiondecision easier Best Regards, Anders Memory usage under any form of *nix is different than under OS/2, Mac or PC. Even if you are shown smaller amounts of memory, that only means that memory hasn't been flushed (buffers flushed). The bit of the OS that is given to you - remember this is a multi-user OS - can get squeezed down a bit, but once you require more memory, it's available. -- Thu, 23 Jan 2003 23:40:01 +1100 11:40pm up 7 days, 9:23, 4 users, load average: 0.08, 0.31, 1.03 -- |____ | kuhn media australia| | / ,, /| |'-. | http://kma.0catch.com | | .\__/ || | | |=| | _ / `._ \|_|_.-' | stephen kuhn| | | / \__.`=._) (_ | email: [EMAIL PROTECTED] | | |/ ._/ || | email: [EMAIL PROTECTED]| | |'. `\ | | |icq: 5483808 | | ;/ / | | | | | smk ) /_/| |.---.| | mobile: 0410-728-389| | ' `-`' | Berkeley, New South Wales, AU | -- linux user:267497 * RH 8.0 * PC/Mac/Linux/Networking/Consulting -- It's not enough to be able to pick up a sword. You have to know which end to poke into the enemy. (Lords and Ladies) Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] OpenSource AutoCad for Linux?
On Thursday 23 Jan 2003 2:30 am, Idea.list2BT wrote: - Original Message - From: ThinKer [EMAIL PROTECTED] Have either of you asked NeTraverse whether AutoCad is known to run under win4lin? I have found them to be very helpful - just ask the question at [EMAIL PROTECTED] and I think you will get a reply. If they don't know, I understand that you can buy the product under a money-back guarantee. You just tell them what the critical program is, and if it doesn't run you get your money back. It's worth a try. Anne -- Registered Linux User No.293302 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Native Linux app Comparable to Quickbooks pro?
Stephen, I just installed Quasar and after a very perfunctory (do you like that word?) look, I would have to admit I'll be giving it a trial. Looks good. Hsimilar to MYOB? I might have to ditch MYOB...getting sick of the updates/upgrades...and it's clunky...and it runs under Windblows... (Then I'll be down to TWO apps that I have to run under M$ - Photoshop and Illustrator) -- Regards Trevor Rhodes === Powered by Linux- Mandrake 9.0 Registered Linux user # 290542 at http://counter.li.org Registered Machine #'s 186951, Source : my 100 % Microsoft-free personal computer. === Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Mozilla
Now here is a funny thing, /.mozilla/user/enpo83.slt/mail has 83.4 MB of data /.mozilla/user/eu8shu49.slt/mail has 73.0 MB of data156.4 MB total and yet at the same time just 73 emails, none with any attatchments. I am suspicious that mozilla is only giving the appearance of deleting it's messages, and in fact it is building up over time to be quite a tidy accumulation. I just wonder whether this is a problem with my setup or a problem with mozilla. John -- John Richard Smith [EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mozilla
On Thu, January 23 2003 7:23 am, John Richard Smith wrote: Now here is a funny thing, /.mozilla/user/enpo83.slt/mail has 83.4 MB of data /.mozilla/user/eu8shu49.slt/mail has 73.0 MB of data156.4 MB total and yet at the same time just 73 emails, none with any attatchments. I am suspicious that mozilla is only giving the appearance of deleting it's messages, and in fact it is building up over time to be quite a tidy accumulation. I just wonder whether this is a problem with my setup or a problem with mozilla. Well.. what you need to do, is make sure to empty the deleted items folder in mozilla-mail, and also see if there's an options somewhere to compact folders or something similar-sounding. -- Chuck Burns, Jr [EMAIL PROTECTED] ---==--- Bones: The man's DEAD, Jim! Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Mozilla
John Richard Smith wrote: Now here is a funny thing, /.mozilla/user/enpo83.slt/mail has 83.4 MB of data /.mozilla/user/eu8shu49.slt/mail has 73.0 MB of data156.4 MB total and yet at the same time just 73 emails, none with any attatchments. I am suspicious that mozilla is only giving the appearance of deleting it's messages, and in fact it is building up over time to be quite a tidy accumulation. I just wonder whether this is a problem with my setup or a problem with mozilla. John Select your Inbox folder and then do to File menu and select Compact Folders. Mozilla doesn't delete messages because that would slow things down. So you have to manualy do it. Also take a look at Edit Preferences Offline Disk Space. Here you can set to run Compact Folders when Mozilla will save x KBs of space. x is any number you wan't. -- Live long and prosper! Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Native Linux app Comparable to Quickbooks pro?
On Fri, 2003-01-24 at 00:19, Trevor Rhodes wrote: Stephen, I just installed Quasar and after a very perfunctory (do you like that word?) look, I would have to admit I'll be giving it a trial. Looks good. Hsimilar to MYOB? I might have to ditch MYOB...getting sick of the updates/upgrades...and it's clunky...and it runs under Windblows... (Then I'll be down to TWO apps that I have to run under M$ - Photoshop and Illustrator) I'm sold. I'll give it a go. -- Fri, 24 Jan 2003 00:45:01 +1100 12:45am up 7 days, 10:28, 4 users, load average: 0.93, 0.83, 0.52 -- |____ | kuhn media australia| | / ,, /| |'-. | http://kma.0catch.com | | .\__/ || | | |=| | _ / `._ \|_|_.-' | stephen kuhn| | | / \__.`=._) (_ | email: [EMAIL PROTECTED] | | |/ ._/ || | email: [EMAIL PROTECTED]| | |'. `\ | | |icq: 5483808 | | ;/ / | | | | | smk ) /_/| |.---.| | mobile: 0410-728-389| | ' `-`' | Berkeley, New South Wales, AU | -- linux user:267497 * RH 8.0 * PC/Mac/Linux/Networking/Consulting -- I don't have any solution but I certainly admire the problem. -- Ashleigh Brilliant Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] Internet security Mandrake 9.0
Hello Derek, Even though 'high' is very severe according to your words, my connection to the internet via my ISP works fine and I encountered no road blocks towards internet. Your remarks give me a very save feeling (but: who can assure me that you are not a malicious hacker trying to lull me and rule my machine?) Ed -Oorspronkelijk bericht- Van: Derek Jennings [mailto:[EMAIL PROTECTED]] Verzonden: donderdag 23 januari 2003 13:14 Aan: [EMAIL PROTECTED] Onderwerp: Re: [newbie] Internet security Mandrake 9.0 On Thursday 23 Jan 2003 9:58 am, Vaessen, E.M.J. (Ed) wrote: I installed Mandrake 9.0 on my PC, that is connected to my internet provider via an ADSL USB modem. I don't have a network, just a simple PC. The security level was put to 'high' during installation, but I don't know at all to what extend I am protected against what. But I am online during many hours a day and I guess hat this makes security more and more important. I delved through many internet pages dealing with firewall and security information but they very often deal with setting up a firewall for computer on a network. Does anyone know where to find information about configuring security on a single PC? Ed Vaessen This is a good place to start. http://www.mandrakesecure.net/en/docs/msec.php http://www.mandrakelinux.com/en/doc/90c/en/Server_Conf_Guide.h tml/security.html For a desktop system 'High' is probably too high a security level. You will find the system will not let you do what appears to be innocent things. If you are coming from the Windows world 'Standard' security is already much higher than you had before. derek -- -- www.jennings.homelinux.net Disclaimer Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is uitsluitend bestemd voor de geadresseerde. Als u dit bericht per abuis hebt ontvangen, wordt u verzocht het te vernietigen en de afzender te informeren. Wij adviseren u om bij twijfel over de juistheid of de volledigheid van de mail contact met afzender op te nemen. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Internet security Mandrake 9.0
On Thursday 23 Jan 2003 2:00 pm, Vaessen, E.M.J. (Ed) wrote: Hello Derek, Even though 'high' is very severe according to your words, my connection to the internet via my ISP works fine and I encountered no road blocks towards internet. Your remarks give me a very save feeling (but: who can assure me that you are not a malicious hacker trying to lull me and rule my machine?) He's wicked! Wicked I tell you! g Anne -- Registered Linux User No.293302 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] OT: website usability
RANT All web designers should be forced to sit behind an average user while he tries to find something. He should be bound and gagged for the duration, then whipped soundly afterwards. /RANT Anne -- Registered Linux User No.293302 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] OT: website usability
Anne; Bad Hair Day? Or is there a specific web-site that has garnered this reaction? Glad I don't do web-sites! Anonymous! *** REPLY SEPARATOR *** On 1/23/2003 at 2:12 PM Anne Wilson wrote: RANT All web designers should be forced to sit behind an average user while he tries to find something. He should be bound and gagged for the duration, then whipped soundly afterwards. /RANT Anne -- Registered Linux User No.293302 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] triple boot
Have installed W2k mandrake 9.0 still have 15 GB unpartitioned space on my HDD would like to install redhat 8.1 first and be able to choose from 3 OS in lilo later want to install debian woody and be able to choose from the 4 OS in lilo what do I add to my present lilo configuration? _ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] OT: website usability
On Thursday 23 Jan 2003 2:18 pm, Lanman wrote: Anne; Bad Hair Day? Yes indeed - it started with a church computer that had been accessed for 'inappropriate use'. They needed a bios password. Simple, I thought. Wrong again. First I had to find a 'security' item that needed its level changing. Not only had I not come across this before, but neither had the vendor. But then, I don't suppose that many people use bios passwords. Or is there a specific web-site that has garnered this reaction? Yeah - Asus. I need a flash bios upgrade. The manual tells how to get one. No doubt it was right when the manual was written in August 2000, but i certainly isn't now. The supplied link is to a German language page - my German is minimal. OK, try the American one. No go. It could be there, but after half an hour (didn't time it, but it must have been) I still hadn't found it. Tried the Europe support email address - doesn't exist any more (this from the manual, again), so now I'm trying to email the US support. It went 5 minutes ago, and hasn't bounced back yet. Fingers crossed. Glad I don't do web-sites! Anonymous! LOL - days like this need a little humour Anne -- Registered Linux User No.293302 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] OT: website usability
Anne Wilson wrote: RANT All web designers should be forced to sit behind an average user while he tries to find something. He should be bound and gagged for the duration, then whipped soundly afterwards. /RANT This could be a new money-making scheme for Mandrake (see my earlier post to this effect). See bound webmasters forced to watch their stupid Flash animations! (Gold Mandrake Club members only - click here to register by credit card). As some usability expert said on Click Online recently: The bigger the company, the worse the website. Did any particular site spawn that rant? Sir Robin -- Like these cutters, and hackers, who will take the wall of men, and picke quarrells. - G. Pettie Robin Turner IDMYO Bilkent Univeritesi Ankara 06533 Turkey www.bilkent.edu.tr/~robin Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Xine - update
On Tuesday 21 Jan 2003 11:16 pm, Pilagá wrote: So, don't bother with c/l. My sugestion to play unencrypted dvds is: Open xineClick on Playlist editor (the uper left icon)AddSearch your dvd playerChoose the files (vobs) that you want to playHilight themClick SelectThen Save your selectionThen hit play, et voilá...! Hi, Pilaga. I tried this, without success. Browing the disk seems to suggest that it is vcd format. There are directories for /cdi, /ext, /mpegav, /segment and /vcd. The /vcd directory contains entries.vcd, info.vcd, lot.vcd and psd.vcd (the first is a text file that just contains ENTRYVCD. Does this ring any bells? It's not essential that I crack this - I can watch them elsewhere, but I hate to be beatedn g Anne -- Registered Linux User No.293302 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] OT: website usability
On Thursday 23 Jan 2003 2:29 pm, robin wrote: Anne Wilson wrote: RANT All web designers should be forced to sit behind an average user while he tries to find something. He should be bound and gagged for the duration, then whipped soundly afterwards. /RANT This could be a new money-making scheme for Mandrake (see my earlier post to this effect). See bound webmasters forced to watch their stupid Flash animations! (Gold Mandrake Club members only - click here to register by credit card). As some usability expert said on Click Online recently: The bigger the company, the worse the website. I like it! At this rate we'll have Mandrake rich in no time! Anne -- Registered Linux User No.293302 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] Xine - update
You should find a large file called something like mpegav.dat I *think* in the mpegav directory , just add this to your playlist (its just an mpeg movie file) [EMAIL PROTECTED] ITS Internal Extension : 5806 Direct Dial: 0870 754 5806 -Original Message- From: Anne Wilson [mailto:[EMAIL PROTECTED]] Sent: 23 January 2003 14:46 To: [EMAIL PROTECTED] Subject: Re: [newbie] Xine - update On Tuesday 21 Jan 2003 11:16 pm, Pilagá wrote: So, don't bother with c/l. My sugestion to play unencrypted dvds is: Open xineClick on Playlist editor (the uper left icon)AddSearch your dvd playerChoose the files (vobs) that you want to playHilight playerthemClick SelectThen Save your selectionThen hit play, et voilá...! Hi, Pilaga. I tried this, without success. Browing the disk seems to suggest that it is vcd format. There are directories for /cdi, /ext, /mpegav, /segment and /vcd. The /vcd directory contains entries.vcd, info.vcd, lot.vcd and psd.vcd (the first is a text file that just contains ENTRYVCD. Does this ring any bells? It's not essential that I crack this - I can watch them elsewhere, but I hate to be beatedn g Anne -- Registered Linux User No.293302 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Openoffice printing with Lexmark Z25
On Thursday 23 Jan 2003 H:43 pm, Stephen Kuhn wrote: On Thu, 2003-01-23 at 21:25, Poogle wrote: I have set up a friend with MD 9.0 and a Lexmark Z25 printer, the printer needs Lexmark drivers and is not compatible with CUPS and requires the use of LPR, I managed to get this set up and printing both BW Colour form other apps but I cannot get it to print using OpenOffice. A print job appears to have been accepted but the printer does nothing and nothing is in the queue, It is essential that my friend be able to open and print Word docs which is why OpenOffice was installed. I have googled and looked at archives to no avail, any ideas please ? If the printer is available in KDE Control Centre, you can send the print job to kprinter - so, like in my OO setup, my printer is defined as: kprinter --stdin ...works like a charm! Thanks Stephen, I'll give at a go next week when I next visit -- http://www.poogle.co.uk Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Internet security Mandrake 9.0
On Thursday 23 Jan 2003 2:00 pm, Vaessen, E.M.J. (Ed) wrote: Hello Derek, Even though 'high' is very severe according to your words, my connection to the internet via my ISP works fine and I encountered no road blocks towards internet. Your remarks give me a very save feeling (but: who can assure me that you are not a malicious hacker trying to lull me and rule my machine?) Ed Well give me your IP address, root password and Credit card number, and then see how trustworthy I am :-) Seriously :- At high security the msec security system will enforce file permissions quite strictly. People on high security often complain they set file permissions one way, and then a few minutes later they get changed. If 'High' works for you then fine. But be aware if 'weird' things happen it could be because of the security level. BTW: The security level is unrelated to the firewall. You can test your firewall here http://scan.sygatetech.com/ (Hmm How do you know that site does not contain malicious HTML designed to cause a buffer overflow in your browser and install a Trojan on your computer? - The best defence against that possibility is to not visit the site with Internet Explorer :-) derek -- -- www.jennings.homelinux.net Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] OT: website usability
Anne; Are you looking for a BIOS update to erase the existing password? If so, look for a jumper near the on-board battery, and set it to the only other choice of pins in the set. First, make sure that the power cable is disconnected from the computer. Then switch the jumpers for a slow count of 5 seconds. This reload the default settings in the BIOS. Reconnect power, and restart the machine. Set the BIOS up the way you prefer, and go for it. If that's not the reason for the BIOS search, Please disregard this notice! Lanman *** REPLY SEPARATOR *** On 1/23/2003 at 2:47 PM Anne Wilson wrote: On Thursday 23 Jan 2003 2:29 pm, robin wrote: Anne Wilson wrote: RANT All web designers should be forced to sit behind an average user while he tries to find something. He should be bound and gagged for the duration, then whipped soundly afterwards. /RANT This could be a new money-making scheme for Mandrake (see my earlier post to this effect). See bound webmasters forced to watch their stupid Flash animations! (Gold Mandrake Club members only - click here to register by credit card). As some usability expert said on Click Online recently: The bigger the company, the worse the website. I like it! At this rate we'll have Mandrake rich in no time! Anne -- Registered Linux User No.293302 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Modem lights
I have been investigating the Gnome desktop, and have been trying to get the Modem Lights applet working to use it for dial-up. I can't get it to work. When I click on it, nothing happens. It gives pppon (without the speech marks) as the connect command. I assume that pppon is a script, but it doesn't appear to installed anywhere. Trying to run pppon from a command line doesn't work either. How do I get Modem Lights to work, please? I can't find a help file for it anywhere. Many thanks Keith Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] Xine - update
That sounds a little screwy to me, a VCD is simply an mpeg file, are you able to play any other mpeg files you have ?? I've just had a quick look thru the xine user-mailing-list on sourceforge, one thing that was suggested was: I have a a problem with (s)vcds on my PowerBook, too. Removing the xineplug_dmx_ogg.so and xineplug_dmx_ogg.la solved the problem here. (http://sourceforge.net/mailarchive/forum.php?thread_id=1552297forum_id=343 8) Have you got the 'xine-vcdx'navigation-capable (S)VCD input plugin installed ? Maybe this will help, download from http://xinehq.de/index.php/releases Jamie [EMAIL PROTECTED] ITS Internal Extension : 5806 Direct Dial: 0870 754 5806 -Original Message- From: Anne Wilson [mailto:[EMAIL PROTECTED]] Sent: 23 January 2003 16:11 To: [EMAIL PROTECTED] Subject: Re: [newbie] Xine - update On Thursday 23 Jan 2003 4:02 pm, [EMAIL PROTECTED] wrote: xine vcd://1 There is no demuxer to handle vcd:/1 Courld there really be one plugin that I haven't got? Anne -- Registered Linux User No.293302 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Xine - update
On Thursday 23 Jan 2003 4:10 pm, Anne Wilson wrote: On Thursday 23 Jan 2003 4:02 pm, [EMAIL PROTECTED] wrote: xine vcd://1 There is no demuxer to handle vcd:/1 Courld there really be one plugin that I haven't got? Anne I never noticed before, but on the box it says VCD2.0. Does that mean anything to you? Amme -- Registered Linux User No.293302 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [newbie] Xine - update
I think that's just the version of the VCD specifications. FYI: *ver 1.0: Karaoke CD specification, MPEG-1 data in tracks *ver 1.1: Video CD: as 1.0 but chapter marks and multi-volume album facilities added *ver 2.0: Video CD: addition of stills, generic menus, playlists, closed caption text. Xine should have no problems viewing it. I've recently burnt my own VCDs using Nero on Windows, it does them as VCD2.0, both a DVD player and Windows media player played it so Xine shouldn't have any problems at all! Tho I haven't tested it using Xine, I'll give it a go when I get home tonight. Jamie [EMAIL PROTECTED] ITS Internal Extension : 5806 Direct Dial: 0870 754 5806 -Original Message- From: Anne Wilson [mailto:[EMAIL PROTECTED]] Sent: 23 January 2003 16:26 To: [EMAIL PROTECTED] Subject: Re: [newbie] Xine - update On Thursday 23 Jan 2003 4:10 pm, Anne Wilson wrote: On Thursday 23 Jan 2003 4:02 pm, [EMAIL PROTECTED] wrote: xine vcd://1 There is no demuxer to handle vcd:/1 Courld there really be one plugin that I haven't got? Anne I never noticed before, but on the box it says VCD2.0. Does that mean anything to you? Amme -- Registered Linux User No.293302 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Xine - update
On Thursday 23 Jan 2003 4:32 pm, [EMAIL PROTECTED] wrote: I think that's just the version of the VCD specifications. FYI: *ver 1.0: Karaoke CD specification, MPEG-1 data in tracks *ver 1.1: Video CD: as 1.0 but chapter marks and multi-volume album facilities added *ver 2.0: Video CD: addition of stills, generic menus, playlists, closed caption text. Xine should have no problems viewing it. I've recently burnt my own VCDs using Nero on Windows, it does them as VCD2.0, both a DVD player and Windows media player played it so Xine shouldn't have any problems at all! Tho I haven't tested it using Xine, I'll give it a go when I get home tonight. Jamie OK - your last message came in just after I'd sent that. I've got the tar.gz file, now, and am just previewing it. I'll have a go with that. I put in the plf varieties of the other plugins and am using the 0.9.17 version, so it should work, I think. Anne -- Registered Linux User No.293302 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Sound in IBM Thinkpad 600E
Hello to all, I'm new in this list. I'm looking how to configure my Sound (CS4232) in the IBM Thinkpad 600E. I tried with: OSS, but the default configuration is wrong. sndconfig, but this can't load the driver. Somebody know how to setup the sound in this machine?? I'm using Mandrake 8.2 Thanks, - - - - - - - - - Ivan Sustaita www.dimono.com Linux User # Todo lo que la mente puede concebir y creer, se puede lograr Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] WINE.
Hi, I have a dual boot system and I am getting tired rebooting from one OS to the other. How good and how reliable is wine in a system that already has the DLLs of W2K? Thanx, Seedkum Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Memoryleakage in 8.2?
On Thursday 23 January 2003 01:58 am, Anders Lind wrote: Hello friends, I am experiencing some problem with my Mandrake box at work, I am using XFCE. When I rebooted 1,5 hour ago it was about 80 MB free Memory and no swap used. This was after I have started Sylpheed only. Now 1,5 hour later I have started and closed KNode down, and now I have only 4 MB free and over 20 MB of swap in use. Could somebody tell me if there is a memoryleakage known in 8.2? I am on the verge on installing FreeBSD on this machine anyway, but this made the transitiondecision easier Best Regards, Anders It is not unusual at all to see lots of memory taken by any modern distro It is in fact a GOOD thing, unused memory is wasted memory That does not indicate a memory leak at all. free total used free sharedbuffers cached Mem:257016 253200 3816 0 13980 95260 -/+ buffers/cache: 143960 113056 Swap: 401584 155980 245604 [tester@ibm333 eggdrop]$ When you actually figure out that statement, I have about 154M free or 61.6%. Just that the system routinely uses that to improve system speed. It is still available on request to programs, reducing tha amount of buffers or cache. This is why linux gets faster when you add memory. Civileme Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] WINE.
On Thursday 23 January 2003 17:16, Seedkum Aladeem wrote: Hi, I have a dual boot system and I am getting tired rebooting from one OS to the other. How good and how reliable is wine in a system that already has the DLLs of W2K? Thanx, Seedkum which apps would you be trying to run? Damian Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Fwd: NDN: [newbie] WINE.
Hi, When I post a message it gets posted and at the same time I get this message saying that it did not get to some place. Why am I getting this message? Is there someting wrong with the Mandrake server? Thanx, Seedkum -- Forwarded Message -- Subject: NDN: [newbie] WINE. Date: Fri, 24 Jan 2003 01:17:53 +0800 From: Mailer-Daemon [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sorry. Your message could not be delivered to: linux-mandrake newbie,emc (The name was not found at the remote site. Check that the name has been entered correctly.) --- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] WINE.
On Thursday 23 January 2003 06:26 am, Damian Gatabria wrote: On Thursday 23 January 2003 17:16, Seedkum Aladeem wrote: Hi, I have a dual boot system and I am getting tired rebooting from one OS to the other. How good and how reliable is wine in a system that already has the DLLs of W2K? Thanx, Seedkum which apps would you be trying to run? Damian I was happy with Open Office for a while but, because I started to run into incompatibility issues, I dual booted for the Redmond Office Suite. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] WINE.
I was happy with Open Office for a while but, because I started to run into incompatibility issues, I dual booted for the Redmond Office Suite. Well, there's a rumour that the latest wine release can do MS Office pretty well. However i have not tried it (i don't have windows installed, so...) you could give it a shot and see for yourself. Latet wine CVS can be found nicely packaged here: http://wine.dataparty.no/rpm/unstripped/ Good luck. the first run will take very long as wine will build some kind of fonts database. It will get nicer afterwards. Damian Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] Compiling Kernels
Hi, Just a quick question regarding compiling Kernels. I am right in thinking that I can compile additional kernels, which I specifically select to use to boot? Can I safely compile a new kernel without mucking up my current system? If anyone has a good newbie website that they know of that would be good as well. Thanks for any info, Jord -- Jordan Elver Every time you open your mouth you have this wonderful ability to continually confirm what I think. -- David Brent (The Office) Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] M9.1beta2 CD1 + CD2 Install
install method ; expert f1 route Problems, === No wheel mouse available failed to detect swap partition no create packages list on floppy During system configuration it refused to accept cd1 when prompted to provide it during set printer to be available at boot time. Failed to install my printer Z53. Unable to install Xwindows , it's choice of screen resolution and generic Geforce3 screen driver would nottest/install. Refused boot disk creation Insisted on installing lilo, but then failed to do so. On first reboot found fault with filesystem on chosen partition, could not repair it, I had to format over chosen partition to restore full boot. seems like a long way to go yet. John -- John Richard Smith [EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Compiling Kernels
Sure, you can have any number of kernels in your system... you're only going to use one at a time, so no worries. For more info, check out http://www.mandrakeuser.org/docs/install/index.html#ku Cheers mate, I'll check it out. I'm going to be messing about with some graphics kernel stuff and don't want to loose what I have already got :) Cheers, Jord -- Jordan Elver When confronted by a difficult problem, you can solve it more easily by reducing it to the question, How would the Lone Ranger handle this? -- David Brent (The Office) Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Xine - update
On Thursday 23 Jan 2003 4:20 pm, [EMAIL PROTECTED] wrote: That sounds a little screwy to me, a VCD is simply an mpeg file, are you able to play any other mpeg files you have ?? I've just had a quick look thru the xine user-mailing-list on sourceforge, one thing that was suggested was: I have a a problem with (s)vcds on my PowerBook, too. Removing the xineplug_dmx_ogg.so and xineplug_dmx_ogg.la solved the problem here. (http://sourceforge.net/mailarchive/forum.php?thread_id=1552297forum_id=34 3 8) I have the .so, not the .la. I moved it out of the way, but it made no difference, so I put it back. Have you got the 'xine-vcdx'navigation-capable (S)VCD input plugin installed ? Maybe this will help, download from http://xinehq.de/index.php/releases I didn't get far with this, either. I downloaded it, tried to ./configure, but got checking for xine-config... no checking for XINE-LIB version = 1.0.0... no *** The xine-config script installed by XINE could not be found *** If XINE was installed in PREFIX, make sure PREFIX/bin is in *** your path, or set the XINE_CONFIG environment variable to the *** full path to xine-config. configure: error: *** We need to find xine-lib 1.0.0 installed *** I think the plf rpm does things a bit idiosyncratically. xine-check complained that it couldn't find config. There used to be one with the old Mandrake setup, 0.9.13, but the 0.9.17 from plf just has config2, and the directory structure seems to be different. I can't find xine-lib, so maybe it isn't installed. Anyway, it looks as though I'm in deep water, and nice as it would be, I have to wonder if it's worth it. Anne -- Registered Linux User No.293302 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Compiling Kernels
On Thursday 23 January 2003 18:33, Jordan Elver wrote: Hi, Just a quick question regarding compiling Kernels. I am right in thinking that I can compile additional kernels, which I specifically select to use to boot? Of course. Can I safely compile a new kernel without mucking up my current system? Yup. If anyone has a good newbie website that they know of that would be good as well. http://www.linux.org/docs/ldp/howto/Kernel-HOWTO.html Thanks for any info, HTH Remember, your first try is very likely to fail. Don't worry, after some (repeated) attempts, you'll get it right. And make sure you are familiar with your hardware. Damian Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] WINE.
On Thursday 23 January 2003 07:02 am, Damian Gatabria wrote: I was happy with Open Office for a while but, because I started to run into incompatibility issues, I dual booted for the Redmond Office Suite. Well, there's a rumour that the latest wine release can do MS Office pretty well. However i have not tried it (i don't have windows installed, so...) you could give it a shot and see for yourself. Latet wine CVS can be found nicely packaged here: http://wine.dataparty.no/rpm/unstripped/ Good luck. the first run will take very long as wine will build some kind of fonts database. It will get nicer afterwards. Damian Do you know if this latest WINE will be in LM9.1? Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] WINE.
Do you know if this latest WINE will be in LM9.1? Probably. There was some discussion about it on the cooker list not too long ago. why? Damian Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Native Linux app Comparable to Quickbooks pro?
On Fri, 24 Jan 2003 01:39, Stephen Kuhn wrote: On Thu, 2003-01-23 at 19:28, Sharrea wrote: I use quasar (from http://www.linuxcanada.com) which is very similar to MYOB, however I don't think data can be imported from quickbooks. The Quasar base package is available for use on a single computer free of charge. I found quasar much easier to use than gnucash - mainly because gnucash is strictly double-entry. Quasar is excellent software AFAIAC! Hsimilar to MYOB? I might have to ditch MYOB...getting sick of the updates/upgrades...and it's clunky...and it runs under Windblows... (Then I'll be down to TWO apps that I have to run under M$ - Photoshop and Illustrator) The reports aren't as good as in MYOB, but that may be due to the fact that I haven't figured out how to obtain the ones I'm after, especially for GST. Nevertheless, I like quasar so much that I'm going to buy the base package to help support it. Oh yeah, and initially I had problems trying to write an invoice because I hadn't setup the tenders (cash, charge, direct credit, etc) in Setup System Tenders, but asking on their website bulletin board got a quick reply from one of the developers. A nice polite reply to the bargain, just like you get from this list ;-) Sharrea -- Help Microsoft stamp out piracy - give Linux to a friend today Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] ARTICLE: Not just more FUD
As I surfed... http://newsforge.com/article.pl?sid=03/01/17/238248 -- Fri, 24 Jan 2003 07:35:00 +1100 7:35am up 7 days, 17:18, 4 users, load average: 0.22, 0.16, 0.29 -- |____ | kuhn media australia| | / ,, /| |'-. | http://kma.0catch.com | | .\__/ || | | |=| | _ / `._ \|_|_.-' | stephen kuhn| | | / \__.`=._) (_ | email: [EMAIL PROTECTED] | | |/ ._/ || | email: [EMAIL PROTECTED]| | |'. `\ | | |icq: 5483808 | | ;/ / | | | | | smk ) /_/| |.---.| | mobile: 0410-728-389| | ' `-`' | Berkeley, New South Wales, AU | -- linux user:267497 * RH 8.0 * PC/Mac/Linux/Networking/Consulting -- He's still funny, but not 'ha-ha' funny. --Ralph Wiggum Kamp Krusty (Episode 8F24) Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: Re: [newbie] X not starting at boot
On Thu, 2003-01-23 at 06:50, Pupeno wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Wednesday 22 January 2003 10:42 pm, Stephen Kuhn wrote: On Thu, 2003-01-23 at 18:20, Pupeno wrote: I've installed MDK 9.0 and everything was working ok, but after making all the updates, X stoped starting at boot. If I run /etc/rc.d/init.d/dm start by had it works, but it doesn't work automatically. It was at position 30 which didn't seem to be right, dm run beforre http even! I think it wasn't starting because the framebuffer interface was already up, I may be wrong, but I moved dm to 99 and it worked, once, now, it's not working anymore. I see starting dm in the framebuffer interface, it says ok, but after that, all I get is the console. Does anybody know what might be wrong here ? Thanks. - -- Pupeno: [EMAIL PROTECTED] http://www.pupeno.com/~pupeno Open up your /etc/inittab - you will probably see that the default runlevel is set to 3 - change it to 5 and after a reboot, you should get your nice KDM/GDM/XDM back to normal (see example below): It is still set to 5 as it was all the time. Thanks. Do a: chkconfig --list dm It should show: dm 0:off 1:off 2:off 3:off 4:off 5:on 6:off If level 5 is off, turn it on with chkconfig --level 5 dm on __ / \\ @ __ __@ Adolfo Bello [EMAIL PROTECTED] / // // /\ / \\ // \ // Bello Ingenieria S.A, ICQ: 65910258 / \\ // / \\ / // // / //cel: +58 416 609-6213 /___// // / _/ \__\\ //__/ // fax: +58 212 952-6797 www.bisapi.com //pager: www.tun-tun.com (609-6213) Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com