Hello,
"aaa authentication ppp if-needed: does not
authenticate if user has already been authenticated on
a TTY line". What does it mean?
Thanks in advance.
Jim
__
Do You Yahoo!?
Kick off your party with Yahoo! Invites.
Hello All,
I am taking the BCRAN this Saturday. I have read the Cisco Press and I have
been practicing with the Boson exams. Does anyone have any other
suggestions?
Bruce
[EMAIL PROTECTED]
___
UPDATED Posting Guidelines:
Does anyone know of websites/newsgroups that post
corrections to mistakes in Cisco Press publications?
They may be official or not-- I don't care.
I found a subnet address error in the Routing TCP/IP
book for one of the static routing config examples. I
was pulling my hair out thinking I was not
On Tue, Jul 04, 2000 at 11:19:17AM -0500, Michael L. Williams wrote:
access-list 10 permit A.B.C.1 255.255.255.24
^^^
This is wrong. Why "don't care bits", if you have a specific
A.B.C address ?
Correct is:
access-list 10 permit A.B.C.1 0.0.0.24
--
Hey Groupies ;)
It's me again. I have another question for you. I was wondering if
anybody knows anyone who got their CCNA and then skipped the CCNP to go
strait for their CCIE. Is this just in dream land or is this actually
possible? I ask this because I just found a lab partner who has
Dear all,
Which part should I pay more attention on ?
Token ring? ATM ? Specification for each Catalyst Switch?
Troubleshooting?
Thanks very much for your help.
--
Jacques Lee
CCNA
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ,
I'll advice that you have enough pay for about 3 or 4 attempts of the CCIE exam.
However after that I still can't guarantee anything
[EMAIL PROTECTED] on 07/05/2000 04:42:43 AM
Please respond to [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
cc:(bcc: Oladele Ayuba/C/Africa/Mobil-Notes)
This is very true - take the trunking off the ports you wish to run
FEC on, you're not connecting to another switch and I'm sure that the
Compaq server isn't much interested in other VLAN traffic.
When you get this going you'll have to set the port channels to "on"
- the compaq cards don't use
Hi All,
I am new to this list so sorry if this has been asked before.
I am really confused about the benefits/setup of Vlans. The more reading I
do on the subject, the more confused I get.
Say, I have a network of 100 users who all access a file server and Internet
router. How can I split them
From your list I would say the last two. If you are taking exam 640-404,
expires 7/31/00, then make sure you read the student guide for the
CLSC class.
Tim
Jacques Lee wrote:
Dear all,
Which part should I pay more attention on ?
Token ring? ATM ? Specification for each Catalyst Switch?
I need to direct connect I 3640 NM-4E1-IMA ATM card
to an IGX.
What kind of cable I need to use
Thanks
Stefano AndrelloSystem EngineerTecnonet
SPA
CCNAtel +390226928817fax
+390226928836mobile +393482513162[EMAIL PROTECTED]www.tecnont.it
Did you make any analysis whenever the router freezes, such as the routing
table entries, ping connectivity etc..
If you have some detials with you then kindly send it across. It may help
to resolve the issue asap.
Thanks
Hitesh
CCNA
Andrew Larkins [EMAIL PROTECTED] on 07/05/2000
all connectivity is gone - no eigrp updates come through, ISDN does not kick
in... basically dead with power on
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: 05 July 2000 09:36
To: Andrew Larkins
Cc: Cisco Mail List; [EMAIL PROTECTED]
Subject: Re: Cisco 3640
The "Customer Appreciation Event" was much more fun! The trolli hat was a big hit when
I got back to work. :-)
*** REPLY SEPARATOR ***
On 6/27/2000 at 7:46 PM Phillip Diamanti wrote:
:Beer bash at networkers who
Hi there gang
Is my assumption right concerning this frame relay switching scenario ?
Cisco DLCI 16
Ser0| |Ser1
| |
| |---
it should be like this
Interface serial 0
Frame-relay route 16 interface serial 1 18
Interface serial1
Frame-relay route 18 interface serial 0 16
provided you want to announce DLCI 16 on serial 0 and DLCI 18 on serial 1
and interconnect them to form a PVC ...
I am not getting why you have
YES i was out of line and i appologise .BUT the guy was getting some bad
info.everyone was looking in the air and not the ground
It seemed the only way HE was going to get some GOOD advise was if someone
shacked the place around abit...all the advise after my rant was very
sound
Hi there Andrew
Do a show processes on your box look at the utilization .
It might give you an idea what the processor is crunching out .
Regards
Olden
-Original Message-
From: Andrew Larkins [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 05, 2000 8:55 AM
To: Cisco Mail List
Subject:
Since cisco is retiring the ccnp 1.0 this end of July. Assuming that Joe
Blow has passed his ccnp 1.0 track, does it mean that after July, his CCNP
status will be voided? And he has to re-take the ccnp 2.0 track? If that
is not the case, then how long will his ccnp 1.0 certification hold
In a message dated 7/5/00 5:27:18 AM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
go to www.ciscopress.com , there is correction for the book you mentioned.
The page is a messed up link...I think the servers down...oh well, nice CISCO
site...lol ;)
Mark Zabludovsky ~ CCNA
A
Inverse arp maps layer 3 addresses to the appropriate DLCI.
Yes you can have multiple frame-relay route statements on the same
interface.
Can you tell me which DLCIs you want to announce and on which interface. As
far as i can understand you want to announce DLCI 16 on serial0 and DLCI 18
on
Hi there
Thx Atif
Its me and my Motorolas again !
We need both 16 18 to be switched through serial 0
I left 16 out because I reckoned the inverse arping will take care of that
to create the pvc map .
Is it possible to make multiple statements on a single physical interface ?
Thx in advance
Olden,
You might want to be more specific with your questions in the future,
otherwise you will get answers like this. Once you read the autoinstall
procedures, you should understand why I can't give you a more specific answer.
SEE the below URL for details on how to perfrom autoinstall
Atif ,
16 18 on serial 0
18 on serial 1
Basically the aim is to get from one Motorola side through the Cisco to the
other Motorola side .It'll be nice if you can have 16 18 on the one
Motorola to go through to ultimately end up on the other Motorola side .
Hope it helps !
Cheers
Olden
Try changing the set interface to set next-hop. Use set next hop when you
know the next hop address. In your case: change "set interface serial0"
to "set ip next-hop 192.168.3.2" and "set interface serial1" to "set ip
next-hop 192.168.4.2"
When you said that your configuration wasn't working;
Thx for the link Tim !
Was just looking for soemthing to guide me !
Thx again !
Cheers
Olden
-Original Message-
From: Tim Evens [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 05, 2000 11:46 AM
To: [EMAIL PROTECTED]
Subject: Re: Auto Install
Olden,
You might want to be more
Jim Bond wrote:
"aaa authentication ppp if-needed: does not
authenticate if user has already been authenticated on
a TTY line". What does it mean?
You have two options for user authentication:
- PPP authentication PAP/CHAP (after PPP starts),
- Username/Password prompt on tty line.
In
At 01.52 22/06/00 -0700, Cisco Wave wrote:
you must execute the command
"clear ip nat translations"
and quickly
"no ip nat static source ..."
Hello There,
How can I remove a NAT entry ?
"ip nat static source outside ... "
I thought that a no of the same line should be doing
it ... However
Hi there gang
Can somebody help me with this ?
I need info and as to what local director is for the 7200 .
I checked Cisco's site but did not become any wiser !
Thx
Olden Pieterse
MCP , CCNA , BCMSN , BSCN , BCRAN
Brainbench Certified CISCO Network
Lilian,
I think you can find better advices in groups dedicated to SUN products.
This group is dedicated to Cisco rather than SUN
Anyway,
Can't help you with Solaris 8, but I used Solaris 2.6 on several Intel
machines, it works pretty fine and I liekd the prformance, but hardware was
(and
I agree with this
-Joe-
Andreas Klemm [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
On Tue, Jul 04, 2000 at 11:19:17AM -0500, Michael L. Williams wrote:
access-list 10 permit A.B.C.1 255.255.255.24
^^^
This is
It is all in the mind,
I think it depends on the individual i.e do you have the experience and what
it takes to understand the concepts and pass the exams ?
Another point is that taking this exams as modules allow you to know some
finer details about the technology you will be working with in the
Yep! Try this one instead:
www.allnetllc.net/chat/ciscochat.htm
From: [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED], [EMAIL PROTECTED]
Subject: Re: Return of the Chat Room
Date: Wed, 5 Jul 2000 00:43:20 EDT
In a message dated 7/5/00 12:39:06 AM Eastern Daylight Time,
See faq question number 21
http://www.cisco.com/warp/public/10/wwtraining/certprog/faq1.html#ccnp-ccdp
Tim
woody wrote:
Finally attained my CCNP/CCDP status. Thanks to all on the group for
answering most of my questions (and ridiculing some of my answers - hell we
all have to learn...)
test2
--
John Gesualdi
The Providence Journal Company
Phone (401)277-8133
Pager (401)785-6938
CCDP,CCNP
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report
I don't know if this will help or not.
I've used the internal T1 cards on 1720, and had trouble with them when
using IOS levels 12.0.3T and 12.0.5T Once we upgraded to 12.0.7T there
were no more problems.
I have a situation where a 1601 R 12.0 (3) is on ptp frame
at frac T with 1 channel
Do one thing .. post your setup requirements and the equipment details ( if
thats not a prob ) and then i am sure someone ( ho0pefully me :) ) will be
able to help you better ...
One thing i want to make clear is that you cannot route a single DLCI to
multiple DLCIs.
Regards
Atif
http://www.cisco.com/warp/public/cc/pd/cxsr/400/index.shtml
it balances tcp/ip traffic across mutliple servers.
..
Oz
http://www.mcseco-op.com/Cheap_Cisco_stuff.htm
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and
http://www.cisco.com/warp/public/779/smbiz/service/pindex.html
Oz
http://www.mcseco-op.com/Cheap_Cisco_stuff.htm
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report
Folks,
Where in Boston I will be able to buy a rack for my equipment, I don't
want to pay too much.
Thanks,
Juan Blanco
Allied Riser Communications Inc.
Boston Area Manager, Field Operations
www.ArcBroadband.com http://www.arcbroadband.com/
___
If you want DLCI 16 on one interface to switch to DLCI 16 on the other AND
DLCI 18 on one interface to switch to DLCI 18 on the other then the config
below will do it for you.
Darren
!
frame-relay switching
!
interface serial 0
encapsulation frame-relay
frame-relay intf-type dce
clock rate ?
Hi ,
Thanks for all the posting in this wonderful newsgroup.
After obtaining my CCNP , now i would like to get specialised.
Which of the specialise course is the most easiest to obtained ??
Comments please ...
Regards
ken
___
UPDATED Posting Guidelines:
Hello,
Would some one please remind me which WAN technologies are considered nonbroadcast
multiaccess, NBMA? which
are
considered broadcast multiaccess?
Thanks
Omer
NetZero Free Internet Access and Email_
Download Now
Dear Michael,
I have found what the problem was. Before I explain what happen, please examine the
configuration of IP RIP and ip
configuration of serial 0 from the output bellow.
R3#sh ip int brief
Interface IP-Address OK? Method StatusProtocol
Serial0
Hi.
Does anybody know format of CCIE Design Lab Exam?
thanks.
Ali Burin KOZAK
[EMAIL PROTECTED]
Network |
--G R U B U--
* 90-216-556 13 53
Fax 90-216-556 11 88
___
UPDATED Posting Guidelines:
Hello,
I have a router with tow serial ports. I have noticed that one of my serial
interfaces, which is configured with HDLC
encap, does not give me the option to choose
between point-to-point or multipoint subinterfaces. The other serial interface, with
frame-relay encap, allows me to do
The localdirector is a separate box and doesn't really talk to the 7200. I
have two of them now and they've been working great. We turned them on,
configured them, and forgot about them. That's the upside...they work with
little trouble and if you get two of them the failover works very well.
From me:
www.optsys.net
-Brad Ellis
CCIE#5796
"Juan Blanco" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Folks,
Where in Boston I will be able to buy a rack for my equipment, I don't
want to pay too much.
Thanks,
Juan Blanco
Allied Riser Communications Inc.
12.0(9) is buggy. try running 12.0(7)t. however make sure you have enough
DRAM/FLASH to handle this IOS.
-Brad
"Andrew Larkins" [EMAIL PROTECTED] wrote in message
8F5F72F80EF5D311ADE600A0C9DCF86251E753@UBDCCOMJHBEX">news:8F5F72F80EF5D311ADE600A0C9DCF86251E753@UBDCCOMJHBEX...
Good day all,
I
I would like to know that best books and resources to study for web
security. Particularly, I would like to learn about the the canned
scripts that target for Apache CGI-bin vulnerabilities and the
corresponding security measures. Any info is appreciated.
George Zhang, CCNP
Assuming the server is running NT, FastEtherchannel is enabled on Compaq NC
series NICs through the Advanced Network Teaming and Configuration Utility
in the Control Panel. This utility is automatically installed when the
driver for those NICs are installed. The teamed NICs can be set to
Hi, only for validate if the fastethernet port of 3640 router support
trunking with catalyst 2940
I need a especial IOS
thanks for yours comments
regards
_
Federico Díaz Herrera
T E R R A N E T W O R K S M É X I C O
Networks Engineer
Group,
Does anyone know how to get a device sending SNMP traps with a source address
of its Loopback address.
A solution would be greatly appreciated.
Steve.
Steven Dangerfield, Network Engineer/Analyst
B.Eng, CCNA, CCSA
Email : [EMAIL PROTECTED]
Totalise - the Users ISP
Hang on a mo... if you put 12.0(7)T on there you'll lose any Fast
Ethernet interfaces you have. I have found 12.0(7)XK1 to be the most
complete/unbuggy IOS for 3640's.
To be absolutely sure use the beautifully named "hardware - software
compatibility matrix" at
Building Internet Firewalls by Chapman
http://www.itprc.com/security.htm
Irwin
-Original Message-
From: George Zhang [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 05, 2000 10:06 AM
To: [EMAIL PROTECTED]
Subject: Book + Resources about WEB security
I would like to know that best
The lab will be set up in a fashion where less emphasis will be placed on
configs (contrary to CCIE r/s) and more so on your design. The proctor will
test your design with a software program able to simulate various
applications, and a large volume of devices. So in essence, you can throw
You can use the following snmp-server command:
snmp-server trap-source Loopback0
Dan
From: Steven Dangerfield [EMAIL PROTECTED]
Reply-To: Steven Dangerfield [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: SNMP from a device using the Loopback address
Date: Wed, 5 Jul 2000 15:43:37 +0100
Let's see if I can explain some of this without sounding like an idiot -
I remember having to go thru all this when I was updating fields of stuff
for a spreadsheet - the memory 2048/2048 is added together to give you the
4MB of RAM. The first number is installed memory, and the second is
Avran,
I passed the CCNA exam last week, and my Cisco instructor said to purchase
Top-Down Network Design at www.Bookpool.com (cheaper than amazon). Here is
the link:
Amazon:
http://www.amazon.com/exec/obidos/ASIN/1578700698/o/qid=962810895/sr=8-1/ref
=aps_sr_b_1_3/002-1592216-4739264
Book
That depends if you use a proxy server or no. If you use a proxy server,
when you configure the browser you should specify that you have a proxy and
them put the IP address and the port number.
Ramon Lugo
-Original Message-
From: Arun Upadhyay [mailto:[EMAIL PROTECTED]]
Sent: Monday,
I configured a 2620 Cisco router using Cisco CofigMaker and now is doing
this.
%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/2610_melville-confg (Timed out)
%Error opening
Hi,
on attempting to configure the controller (en;controller e1 1) I get bumped
by 'unrecognized'. Does anyone know the pre-req's for setting up such a
beast for data (IP) over G.703 over the MFT, that is w/o using serial
interfaces (but rather the RJ port on the MFT module) ??
Thanks
mh
I have been looking for an out of print book for studying the OSI model to a
deeper level of understanding. I have received multiple recommendations for
a book by Marshall Rose. The title is in question but is something like
'understanding the OSI model'. I have tried Amazon and they confirmed
CCNP, probably 3-4 routers and a switch. Ive got them in stock:
www.optsys.net
-Brad Ellis
CCIE#5796
""Jordan Rivard"" [EMAIL PROTECTED] wrote in message
005201bfe697$3895e120$[EMAIL PROTECTED]">news:005201bfe697$3895e120$[EMAIL PROTECTED]...
Hi,
I was wondering what you would recommend for
I agree...I put 12.0(7)T on one of mine and I lost the serial ports. shrug
-Original Message-
From: Charlie Hartwell [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 05, 2000 10:49 AM
To: [EMAIL PROTECTED]
Subject: Re: Cisco 3640 router freezing up
Hang on a mo... if you put 12.0(7)T
Happy B-day Steven
- Original Message -
From: Steven LP Poh (Jaring) [EMAIL PROTECTED]
To: ABDUL RAZZAQ [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Tuesday, July 04, 2000 12:31 PM
Subject: Re: Happy Independence Day Americans
Hey ! Is my birthday also :-)
- Original
Since someone already brought it up: :)
Passed CCDA today, with a respectable 863, using Top-Down Network Design and
a Designing Cisco Networks CBT.
The only problem with Top-Down Network Design is that it's too good.
Seriously, I thought it was a great book.
However, as Priscilla is sure to
Hello,
How do you disable "dialer idle-timeout" and set the DDR connection
permanently? I want to permanently connect a DDR call to the isp for
internet access. I read an info from CCO that say that if you use "no dialer
idle-timeout", the idle timeout will default to 120 seconds. I issued show
Hi, is 16 colors and 640x480 resolution a general configuration regardless
what kind of VGA card is used? What motherboard and CPU do you have, are they
the supported ones on Sun website?
Lilian
Vijay Ramcharan [EMAIL PROTECTED] wrote:
I've installed Solaris 8 on an Intel based PC. Runs fine,
I put "don't care bits" because I used A.B.C.1 to demonstrate that we don't
care what those octects were.
I should have used 0.0.0.1 or something else... I can see how A.B.C.1
can seem like a specific address
Sorry for the mixup. I'll be more careful of these things in the
future..
And that is why a MAC address is often referred to as a BIA (burned in address).
Tom Lisa, Instructor, CCNA, CCAI
Community College of Southern Nevada
Cisco Regional Networking Academy
Christopher Larson wrote:
How would the IP Unicast know where to go? It has to resolve to a machine
Does anyone know which are the best study books out
for CCNA 2.0? Thanks for any assistance.
Why don't you just use one access list on the 192.168.x.x network router to
deny it from seeing any traffic from the 10 network?
eg.
#access-list 101 deny ip 192.168.0.0 0.0.255.255 10.0.0.0 0.255.255.255
#access-list 101 permit any any
Apply this outbound to the 192.168.x.x interface and you
Hello all,
My apologies for flooding this non cisco stuff but you guys are the only
source for now so please no flames
I got my 1st contract to re-desing small company's network but I really don't
know how much to charge for my service (hourly). I am a bit on hold right now
not to bid very
You can have the server be a part of both VLANs without having to do any
routing.. Here's a config snip with an example.
Everything defaults to VLAN 1, so no extra configuration on any of the
ports that will be only on vlan 1.
For clients on the second vlan, do this for every port that you
That config would only be valid for a 2900XL or 3500XL, right? I'm not sure
how this would be configured on a Set-command switch like a 5000.
And IIRC, multi-vlan ports are not allowed if there are any trunk ports
configured on that switch, so that's something to watch for. I might be
wrong on
On Wed, 5 Jul 2000, Lugo, Ramon wrote:
I configured a 2620 Cisco router using Cisco CofigMaker and now is doing
this.
Don't do that, then. :-)
Seriously, learn to use the command line.
%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening
Where does one find the current counts on how many CCNA, CCDA, CCNP,
CCDP's there are in the world? I know that cisco has a web page that
posts the number of
CCIE's, but they dont have the others.
Thanks,
wendell
___
UPDATED Posting Guidelines:
Off the top of my head, I would try two things.
First set the idle-timeout value to it's highest value and define ALL
traffic to be interesting under the Dialer-List statements. This should
keep the line up if you have ANY traffic flowing across the line. You could
then setup a ping statement
We currently have 4 offices, 2 in the Pittsburgh area and 2 in California
(one is Saratoga and one being built in San Fran). The plan is to connect
each one through a dedicated T1 line for redundancy and VOIP and video
conferencing purposes. I was planning on installing 3548 XL switches in all
of
Extended ACLs place the source address first, so that line should read:
access-list 101 deny ip 10.0.0.0 0.255.255.255 192.168.0.0 0.0.255.255
access-list 101 permit ip any any
Even this won't have the entire desired effect. This may prevent the setup
of TCP connections, but UDP traffic from
I usually just put dialer idle-timeout 2147483, I think this is the max
number of seconds you can put on it, and have had pretty good luck with
the connection not timing out.
On Wed, 5 Jul 2000, Nahrajieh D.Anggaon wrote:
Hello,
How do you disable "dialer idle-timeout" and set the DDR
How do you justify increasing CIRs? My manager wants to know if I am/ATT's
network is dropping packets on the PVC. We exceed the CIR of 16k for up to
90k sometimes - but my manager doesn't see a problem with this since no one
at ATT can confirm 100% that we are dropping packets when we see
Thank you Jay!!!
-Original Message-
From: Jay Hennigan [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 05, 2000 1:43 PM
To: Lugo, Ramon
Cc: [EMAIL PROTECTED]
Subject: Re: %Error opening tftp
On Wed, 5 Jul 2000, Lugo, Ramon wrote:
I configured a 2620 Cisco router using Cisco
At a router command line, type "show frame pvc". Look at the stats for In
DE Pkts and Dropped Packets for the PVC in question. This will show you the
number of packets that crossed that PVC while over your CIR, and also the
actual number of packets dropped.
It's probably best to clear your
I have two 2500 series routers(2 serial, 1 ethernet) and a 1600 series
router (1 serial, 1 ethernet). What is the best way to setup a lab with
this equipment? What types of cables? I also have a couple of CSUs if
needed.
Thanks
___
UPDATED Posting Guidelines:
Hi ,
I'm Clarence Cummings, a Senior Network Engineer supporting the FAA's
Air Traffic Control System at the Atlantic City International Airport. I
have a BSEE, MSSM, NETWORK+, I-NETWORK+, CCNA, and is currently studying
for my CCIE Qualification Exam. I live in Camden County and is looking
to
I thought you couldn't mix 1.0 and 2.0 tests?
(there are 2-1.0's and 2-2.0's listed here for CCNP)
Adam Hickey
[EMAIL PROTECTED]
- Original Message -
From: "woody" [EMAIL PROTECTED]
Newsgroups: groupstudy.cisco
To: [EMAIL PROTECTED]
Sent: Monday, July 03, 2000 6:05 AM
Subject:
One quick correction on the reply below. The dropped packet
counter in the "show frame-relay pvc" is defined as the
following:
dropped pkts: Number of incoming and outgoing packets dropped
by the router at the Frame Relay level.
So the counter it is not reflecting the amount of packets
dropped
Is anyone using a
Cisco router with CoVad un bridge ? I need to setup an VPN with IPSEC and
I need to start the VPN in the router and all CoVad will sell me is
Netopia.
Ryan V.
FinneseyNetwork Administrator @tmosphere Interactive 1375 Broadway, 11th floor New York, NY 10018 212 827 2507
That's a good point! How would the router even know that a packet was
dropped in the cloud? It wouldn't.
Thanks for the correction,
John
One quick correction on the reply below. The dropped packet
counter in the "show frame-relay pvc" is defined as the
following:
dropped pkts:
Ok, I've just spent all morning on Cisco's site (our rep is out of town) and
can not make heads or tails of what I need to buy.
What I have is a mixed IP, IPX, and Token Ring network. There are some NT
boxes, some Netware boxes and an AS400 (clients connect via IP client).
I'm going to install
Hello everyone.
I am new to this list. I am shooting for the CCNP 2.0 certification by
December 2000. Can anyone suggest routers,switches,and books that I should
be looking into. My desire is to setup a LAB at home. Take an exam every
month. I do not have the money for the CISCO 5 day
This has been covered so many times...
In the Cisco FAQ on certification it clearly states that you can mix and
match 1.0 and 2.0 exams.
I am also a "mixed" CCNP. I passed the Support 2.0 (CIT) and the rest were
1.0 exams.
I went onto the Galton site a few days after I wrote the
I configured a 2620 Cisco router using Cisco CofigMaker and now is doing
this.
%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/network-confg (Timed out)
I don't know how to
You can mix all you want, but if just one exam is the old one, you will get
the CCNP 1.0 status.
Ole
~~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
~~
-Original Message-
From:
I noticed on CCO that when configuring ISDN it suggests settings the speed
to 56k for calls outside of the local exchange. What types of situations
are they actually referring to, and why would we use 56k instead of 64k?
Another dumb question: how do we know if a called number is in our local
Yes it does. You will need to use an IOS PLUS image that supports ISL or
802.1Q encapsulation. Don't forget to configure sub-interfaces.
Good luck...
Parrish.
Federico Díaz Herrera [EMAIL PROTECTED] wrote in message
Hi,
Did anyone know where I can download a exam test software?
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL
HELLO : THIS IS MY FIRST TIME TRYING OUT THIS SITE.
HERE'S MY PLEA OF HELP. I AM PREPARING MYSELF TO TAKE THE "BCMSN"
AND I NEED TO KNOW THE FOLLOWING:
1) WHAT ARE EXACTLY "THE EXAM OBJECTIVES" FOR THIS THING?
A. IF I YOU CAN HELP ME WITH AN OUTLINE, OR
B. IF I CAN BE REFERRED TO A SITE
1 - 100 of 145 matches
Mail list logo