You can setup an NTP Server on a unix machine and let all
your routers sync to this NTP server by configure the following commands
in your routers. Make sure you have a accurate timing in your server.
ntp clock-period 17179860
ntp server 10.200.2.10
Hope this will ans your questions
Rgds,
Sam
Hey group,
Just wondering if there are any kind of certifications for DSL technologies. If there are do you know of any good books for them and who makes the test? Thanks group.
Mark Zabludovsky ~ CCNA, CCDA, 1/2-NP
[EMAIL PROTECTED]
"Even if I knew I had only 1 more week to live, I wou
Hello Christ!
If every router adv the loopback subnet though OSPF. Then you can ping to them.
A proper static router also can help you to reach the loopback subnet in another
router.
Cisco router dose not allow you to put two interface in same subnet.
When I work out the IP addressing plan. I
First thing I noticed was that any packet that would match your
access-list 2 would also match access-list 1 in the first sequence ( 10
in this case ) of the route map. So no packets with the first two
octets of 172.16.. would ever make it to sequence 20 of the route map
where access-list 2 is c
Hi all,
I have been taking a look at a couple of technologies
lately and I have run across MPLS and Transparent LAN
services. Are there any differences or similarities
and if so could someone expand on that.
thanks,
John L. Mairs
=
John L. Mairs
__
I'm in a multihoming situation where, so far, one provider is telling me
they can only send the full routing table without some special arrangements.
This sounds like a load of bullhockey, but that's what they're saying. So,
here's the question...
I only want to receive from both ISPs their rout
Hello,
If you have the CCNA course material in Power Point or other software
copy format. Please kindly send a copy for me.
Many Thanks!!!
Quncy Lau
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Non
They actually have done away with the mandatory reply card. Had to many returns that
they had to pay for. They send you a package with the selections of the month, and if
you want to order you reply. And you can actually get some good books at some good
prices.
Andre' Paree-Huff wrote:
> You
Hello Nuurul,
> Hai,
>
> Today, I have observed a network eng from a vendor
> install a E&M Type II card on a Cisco 3600 and
> connected to my E&M II Toshiba card. We did a loop
> test from port 1 and port 2 and it works. The Eng
> configured the first port dial peer as 300..., second
> port dia
Hello Nuurul,
> Hai,
>
> Today, I have observed a network eng from a vendor
> install a E&M Type II card on a Cisco 3600 and
> connected to my E&M II Toshiba card. We did a loop
> test from port 1 and port 2 and it works. The Eng
> configured the first port dial peer as 300..., second
> port dia
Hello Nuurul,
> Hai,
>
> Today, I have observed a network eng from a vendor
> install a E&M Type II card on a Cisco 3600 and
> connected to my E&M II Toshiba card. We did a loop
> test from port 1 and port 2 and it works. The Eng
> configured the first port dial peer as 300..., second
> port dia
On Tue, 5 Dec 2000, Adam Hickey wrote:
>
> Nope, it would probably kill ya. We have a neighbor (in our office building)
> that tried to do full table. It ended up being darn near 130 Megs, maybe
> 126MB. So even if it is less than the 128MB that you have for memory, you do
> not want to use ALL o
Dear all
Thanks for you guy's infomation.
Keep it up.
Whoever want my study notes, pls feel free to contact me.
William
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to
Congraulations! How do you rate the Boson Test? Is it good enough for
preparing the CIT exam?
- PYF
""Gabriel Nickel"" <[EMAIL PROTECTED]> wrote in message
00b801c05ec6$7f3fd840$[EMAIL PROTECTED]">news:00b801c05ec6$7f3fd840$[EMAIL PROTECTED]...
> Hi group,
> i am happy to announce that i have pa
I have a friend that tried to schedule the CID Beta and it was full so he
tried to schedulae the CID 3.0 exam and Sylvan said it was no longer
available. Can anyone verify this?
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
My wife and I have truly enjoyed this bit of frivolity. Thanks to all of you
for contributing your wit to this frivolous thread
As always, it's a pleasure.
Chuck
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Chuck Larrieu
Sent: Sunday, December 0
I have 5 Cisco routers I rent over the Internet to CCNA/CCDA trainees. I
wrote 6 user interface labs, and have begun writing more complex labs.
I think it would be a great offering if I could actually create labs which
correspond with Cisco CCNA/CCDA training and course materials. I have my
CCN
Are the loopback addresses being advertised throughout your OSPF domain?
Or to put it another way, how would a remote router know how to route a
packet to a network not advertised?
HTH
Chuck
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Christophe
Try Marc over at www.ccbootcamp.com. If you can get through his labs you
will be well prepared for your CCIE Lab. He also has tons of referrals from
other CCIEs who used his stuff. I think he's up to about 17 labs now.
Hope it helps.
"Weiping Mandrawa" <[EMAIL PROTECTED]> wrote in message
[
You need to use command "Debug dialer" in global config mode then you can
find easily in your log,(show log)the source and destinations and reasons of
disconnections for this call.
Make sure that all console messages are going to save in log buffer,by
using ccommand:
"logging console buffered"
I am trying to search on cisco and it(only the serch engine) seems to be
down at 5:45pm in San Jose..
anybody experiencing the same?
Dinesh
__
Do You Yahoo!?
Yahoo! Shopping - Thousands of Stores. Millions of Products.
http://shopping.yahoo.com/
Hello,
Does anyone have any suggestions for a good CBT or Book or something to
learn more about BGP? I read a book on BGP, but it talked about
confederations, communities and bgp in general. The ACRC book I have
only grazes the subject I was hoping for a book or something that would
go more in
I will be writing the CCDA exam next week, and was wondering if there is any
material on AppleTalk on it. I have been studying quite a bit and found that
AppleTalk is widely covered, mind you this was the same for CCNA, and I
found no questions regarding AppleTalk on the CCNA. Can anyone please an
I have an old Access pro 2524, 2/2, 4M flash.
I tried to upgrade its flash memory without success. When I put a new Flash
memory, 8MRAM, console says, "Wrong Software ..." I think the flash memory
module has an IOS which is not compatible. So my questions is,
How can I delete the IOS in the ne
Hi Chris,
You can have your loopbacks address as 2.2.2.0/24 but we required
to put in either static or dynamic routing for all the routers to learn abt
this address, otherwise, all other router will not able to ping the loopback
address of other's router. Hope this will answer your questions.
Rg
Greets all.
If i make a mistake in my explanation of this, then please someone jump in
and correct me. I'm still learning a lot of this.
1. Classfull Addressing
The basic thing to remember with classful addressing is any router using
this addressing scheme DOES NOT include the subnet mask within
Does anyone have any opinions on Training centers like Learning Tree or
Global Knowledge.
My company is willing to send me to the classes of my choice, and I would
like to get your views on which school is the best.
Shawn Gressel
PanAmSat Corp
_
FAQ, list archiv
Note that 12.1 adds the feature to HSRP, and the VRRP
standard includes it by default. This is a huge
feature for router redundancy.
--- "Driessens.Hans" <[EMAIL PROTECTED]>
wrote:
> if you use HSRP, icmp redirects are automaticaly
> disabled because hsrp
> doesn't know how to deal with them
>
Probe the ports to see if they're responding? Use a Perl script to verify that the
service is running? Use the "dhcpcmd" utility from the resource kit ("dhcpcmd mibcounts") to grab the stats?
Just a few thoughts...
K.Young
*** REPLY SEPARATOR ***
On 12/4/2000 at 7:09 PM Fran
Hi, Which University CCIE Practice Lab that
you guys can recommend ? Which one is the most
beneficial ?
Thanks in advance
__
Do You Yahoo!?
Yahoo! Shopping - Thousands of Stores. Millions of Products.
http://shopping.yahoo.com/
Nope, it would probably kill ya. We have a neighbor (in our office building)
that tried to do full table. It ended up being darn near 130 Megs, maybe
126MB. So even if it is less than the 128MB that you have for memory, you do
not want to use ALL of your memory just to store the table. There will
On Tue, 5 Dec 2000, Chris Sees wrote:
> Hi,
>
> If I have a router with 3 interfaces, 1 LAN , 2 WAN:
>
> Is there any way to specify a default route based on source IP address?
yes, using policy routing (route-maps setting next-hop based on a source
list).
> In other words, for traffic coming f
http://www.bookpool.com/.x/k9wrskqsu1/ss/1?qs=158720004x
Purchased the subject and passed the CCDA test two weeks later. Excellent
study guide to help you pass the test. Includes electronic book and over
400 questions. It's like purchasing the Boson Exams and the book from Cisco
Press. Study a
if you use HSRP, icmp redirects are automaticaly disabled because hsrp
doesn't know how to deal with them
(not really a purpose of icmp redirects but good too know:)
Hans
-Oorspronkelijk bericht-
Van: Brian [mailto:[EMAIL PROTECTED]]
Verzonden: dinsdag 5 december 2000 19:56
Aan: FREDL
A router sends an ICMP Redirect frame to a host to tell the host that the
host has a more direct route to a destination.
In the Redirect frame, the router says which device the host should send
the frame to. In some cases, the host can reach the destination directly.
This can happen when you h
I have found the most common cause for this to occur with the people I deal with on a
day to day basis is they don't really tie things up correctly.
Often the primary channel is up but subsequent "B" channels are not. Most often due
to the dialer-load threshold be set to 2 or more.
Setting th
At 01:06 AM 12/5/00, inamul wrote:
>How is Cisco books for exams compare to Cisco's instructor led student
>guides ?
>Which would be more appropiate for Cisco exams ??
They are essentially the same thing. Cisco gives the course materials to
Cisco Press who finds an editor who ports them to book
On Tue, 5 Dec 2000, Var1abl3 Var1abl3 wrote:
>
> I am in the process of learning BGP. Say I have two core routers and three
> T3 circuits. Core1 has a connection to ISP1 and ISP2. Core2 has
> a connection to ISP1. What would be the best way to setup BGP so that I can
> get the most use out of m
Policy routing
( I'm starting to act like Jamie Q :-> anybody heard from that guy lately? )
Seriously, having recently discovered policy routing, I have become quite
interested in the possibilities. Check out the policy routing sections of
Jeff Doyle's TCP Routing, or Caslow's book, or Slattery'
Hi,
>From the soap box of Teunis.
Never use 100BaseT ie copper cables between buildings even if they are only 50metres
apart.
WHY??
When you connect two buildings using copper you have the chance of tying them together
electrically. This can create a very dangerous situation. It is indeed
Use route map to specify which trafic should be routed to which interface. In
the routemap, use an access-list to determine the source and/or
source-destination, and I think it should be OK
On 05-Dec-00 Chris Sees wrote:
> Hi,
>
> If I have a router with 3 interfaces, 1 LAN , 2 WAN:
>
> Is ther
hey jim
i have tried it ..i didnt work ...still suppressing the updates because it
is null !!
the main problem is that the same example (or similar) is mentioned in
DOYLE's book and he gives the debup output having updates ...this makes me
confused
> -Original Message-
> From: Jim E
Heres a funny story regarding NAT... I just had a customer's internet down
almost all day today because of this. Running 12.05 you cannot use an
access list for NAT saying permit all. You have to permit more specific
networks... In IOS version 12.07 you can say permit all.
Go figure. Chalk up
Greg,
Synchronous mode only works on a dedicated leased line connection. Ie. the
connection is always on, not switched like an analog dial call.
Paul
"Greg Reaume" <[EMAIL PROTECTED]> wrote in message
90eh6d$j21$[EMAIL PROTECTED]">news:90eh6d$j21$[EMAIL PROTECTED]...
> Hi There,
>
> I have a 17
What interior routing protocol are you running?
>From: "Var1abl3 Var1abl3" <[EMAIL PROTECTED]>
>Reply-To: "Var1abl3 Var1abl3" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Date: Tue, 05 Dec 2000 18:36:11 -
>
>
>I am in the process of learning BGP. Say I have two core routers and three
>T3 circu
Ate que enfim outro barsileiro.
Bem vindo,
Rodrigo Ferreira
"Leonardo Silva - Tecnologia" <[EMAIL PROTECTED]> wrote in message
F7E7BC12B620D4119FA300C00D009BA001C38753@EXCHANGESVRSAO">news:F7E7BC12B620D4119FA300C00D009BA001C38753@EXCHANGESVRSAO...
> Both would be perfect.
>
> If you have to choo
Look up route maps aka Policy Routing.
> -Original Message-
> From: Chris Sees [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, December 05, 2000 1:19 PM
> To: [EMAIL PROTECTED]
> Subject: Default route question
>
>
> Hi,
>
> If I have a router with 3 interfaces, 1 LAN , 2 WAN:
>
> Is ther
Title: RE: Catalyst Sup IOS to Catalyst OS
Hello everyone:
Thank u everyone in this board for
sharing and with help of everyone I passed BCMSN yesterday with score of 797
which is not bad as I thoughtI failed exam in first hour. Overall, test was
bit wierd as wording forquestions were poorl
Hei ... How could you have two routing session on one router ? You have only
one Autonomous System right ?
Don't confuse with the two link you have ... as long as you have only one AS
so there is only one routing table (for BGP). The side effect if you
have more links going through other ISP
anyone knows what ftp multicast is? what is the difference between ftp and
ftp multicast?
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hi,
Im working on a 1603 router. I have to configure
DDR using ISDN to two different locations. When I try to go to the interface
config mode BRI 0:1 or BRI 0:2 it gives an error message saying
"cannot configure the BRI Channels" .. (Im not shure of the exact words,
but it meant this). Onl
Title: RE: Catalyst Sup IOS to Catalyst OS
Are you talking about coverting your switch to Cisco IOS? If so, then there is about a 20 step process to do this which you can find on Cisco's web site.
Patrick Greene
-Original Message-
From: Wibowo Nur Susetio [mailto:[EMAIL PROTECTED]]
You can get around the reply card. I had a friend of mine that is a lawyer
write me up a letter that I sent to them. It informed them that I would
meet their comment and purchase 1 book within the next 12 months but that I
would not be returning any reply cards unless they supply a stamp for eac
any thoughts on smart certify and their cisco
cbts?
It will easy for them if they have two ethernet interfaces. But in this
case they only have one ethernet interface.
I'm running SDSL with kinda same senerio as Tanner, it works fine. Here is
my layout:
ISP<->SDSL
bridge<--->e0/1005/s0<-->s0/2501/e0<>hub/switch<->LAN
So, I
Hi,
If I have a router with 3 interfaces, 1 LAN , 2 WAN:
Is there any way to specify a default route based on source IP address?
In other words, for traffic coming from the LAN, there is a certain DEFAULT
route. And for traffic coming from 1 of the WAN interfaces, there is
another. ??
Chris
Gustavo,
Check
out http://www.certificationzone.com
Study Questions CDROM 2000, it's available on their site, http://www.amazon.com and a few other places...
HTH
Nigel
- Original Message -
From:
Gustavo_Spadaro
To: [EMAIL PROTECTED]
Sent: Tuesday, Decembe
On Tue, 5 Dec 2000, FREDL L AZARES wrote:
> What's the purpose of no ip redirects in VLAN ehternet subinterface
> configuration? Thanks in advance.
It just stops ICMP redirects from being sent.
Here is a scenerio:
hostA 192.168.1.50
routerA e0 192.168.1.1 (hostA's gateway)
routerB e0 192
I have a Route 4000 connected thru Frame-Relay to 2524 with a T1 card.
The 2524 router has IOS 11.0(6).
When I run show service-mod from 2524, i get an excessive number of line
code violation. I talked to a PacBell support, and confirmed that T1 line
is OK.
Router#sho service-mod
Module type i
Title: BCMSN 640-504 - Thoughts before exam
I'm scheduled for the switching exam in less that 2 hours. I figured I'd drop my thoughts in before the exam so they are untainted by the exam experience. I'll post a follow-up tomorrow.
I have hands-on experience with the Catalyst 5000, 4
If all the interfaces in say area 0 are 170.100.1.0 /24 and my loopbacks
are 2.2.2.0/24, should I be able to ping each loopback from all the
other routers? or do I need to make my loopbacks a subnet of the
170.100.1.0/24 address??
Thanx!!
_
FAQ, list archives, and
I am in the process of learning BGP. Say I have two core routers and three
T3 circuits. Core1 has a connection to ISP1 and ISP2. Core2 has
a connection to ISP1. What would be the best way to setup BGP so that I can
get the most use out of my circuits. I have included a sample config
informa
"Mohamed Heeba" <[EMAIL PROTECTED]> wrote in message
91B200CBBEC3D111992A00805F31E6CB88076A@MINAMAIL">news:91B200CBBEC3D111992A00805F31E6CB88076A@MINAMAIL...
> hi
> i guess wat u have said is partially right , the router will not send any
> update outside its serial because there is inconsistent m
Well, I sat the new CID beta on Saturday and I have to
say that I've never been so frustrated with an
examination. Just to provide some insight, I wrote
what likely amounted to over seven pages of comments
for review by the test administrators (hopefully they
will get reviewed).
As more people ta
On Tue, 5 Dec 2000, Jim wrote:
> Hi Motor_5
>
> This sounds like a great deal but if you read their terms, you notice
> that you MUST RETURN a reply card that you will get about every 3 weeks
> in order to NOT BE SENT any books that they have called the selection of the month.
> That's a stamp ev
Just call their customer support. Tell them that you travel and will miss
the chance to refuse shipment of books. You want books sent only if you
specifically request them. I've done this several times. They always say
yes.
> -Original Message-
> From: Jim [mailto:[EMAIL PROTECTED]]
> Sen
Is it possible to set up a simulated frame-relay connection between a cisco
3640 and a 2611 in a back to back lab configuration? Both these routers
have internal csu/dsu 's. I have hooked up two 1602R's with internal 56k
switched csu/dsu 's back to back to simulate frame. To do this I used a
c
This might be a helpful information for some of you.
I was just shopping for another Catalyst 3548-XL-EN (wsc3548xlen) and after
I typed it in on http://www.cnet.com I found it for only $3.099.00 at
http://www.LanBlvd.com - That is $300.00 to 400.00 cheaper than CDW,
ProVantage, etc.
And then an
I have a Route 4000 connected thru Frame-Relay to 2524 with a T1 card.
The 2524 router has IOS 11.0(6).
When I run show service-mod from 2524, i get an excessive number of line
code violation. I talked to a PacBell support, and confirmed that T1 line
is OK.
Router#sho service-mod
Module type i
http://www.cisco.com/warp/public/471/75.html
is a link to making a t1 crossover cable and a 56k crossover cable.
""Wilson, Christian"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Is it possible to set up a simulated frame-relay connection between a
cisco
Why do you suspect modem handshaking as your delay? Modems are typically
very quick at connection, it is the protocols being run over the links which
tend to cause the delays.
>From: "Voice Over" <[EMAIL PROTECTED]>
>Reply-To: "Voice Over" <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Subject
Never used "NO IP REDIRECTS", BUT I have used "NO IP DIRECTED-BROADCAST"
to prevent spoofing attacks to your network, but maybe I can learn a little
something from your question as well.
-Original Message-
From: FREDL L AZARES [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, December 05, 2000 10
Both would be perfect.
If you have to choose, prefer a instructor led class. It's always better to
have someone to ask to. And besides, you'll get the material.
Leonardo Silva
-Original Message-
From: inamul [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, December 05, 2000 7:06 AM
To: [EMAIL
my question is:
can you configure the mica modems in AS5300 so that the handshaking time
decreases?
I changed some of the registers in the as5300 mica modems but I couldn't
save the changes in AT command mode.
does anybody have any suggestions?
_
FAQ, list archives
You can also reply online, so it makes life much simpler! The only thing
I've mailed them besides checks, is one reply card that had a complimentary,
book of my choice, order form.
This is a VERY GOOD DEAL I have amassed a relatively large library of
materials in a short time with only a mo
gHi!
My company is in need of implementin a VPN between it's two sites. Since i'm
new on this area, I would like some recommendations on on Cisco VPN products
and a site where i could find specs for those products.
Thank you in advance.
Ricardo DaSilveira
CCNA,MCSE
Hi Ricardo,
You can use a PIX-to-PIX VPN with 3DES encryption ... works great!!
HTH,
""Ricardo DaSilveira"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> gHi!
> My company is in need of implementin a VPN between it's two sites. Since
i'm
> new on this area,
The Cisco 2500 series routers run from flash. IOS protects itself from
disaster situtions and tels you READ-ONLY :-)
So you can't simply erase it in normal working mode. Get in BOOT monitor and
DL image from tftp server or through console's xmodem.
---
WBW, xander
CCNP+Voice, CCIE writting
"c
I am selling my first cisco lab.
250116dram/8flash
250316dram/8flash
250416dram/8flash
2 crossover serial cables
2 tranceivers
$2800.00
---
Brian Feeny, CCNP+ATM, CCDP [EMAIL PROTECTED]
Network Administrator
ShreveNet Inc. (ASN 11881)
Use lasersI currently use Astroterra lasers combined with cisco routers
to provide 100Mbps connectivity between remote buildings. Aironet is good
but I thought it was limited to 11 Mbps.
Foolishly I Remain,
Thomas A. Beckett, CCNA
Senior Network Engineer
The Motley Fool
703.254.1049
703.68
I think the BCMSN Cisco press book (which is
basically the course book) is good and of course the LAN Switching book from the
CCIE series is excellent.
ML
""Tony & Julie Maldonado"" <[EMAIL PROTECTED]> wrote in message 01c05e63$c9221080$74d4d93f@maldonad">news:01c05e63$c9221080$74d4d93f@m
What's the purpose of no ip redirects in VLAN ehternet subinterface
configuration? Thanks in advance.
Fredl Azares
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE
Anyone has a list of Links for CCIE Written Exams, I nedd some
kind of question & answer.
Thanks
Can someone advise me about which books and course material are best for
Cvoice exam 640-647. I do not intend to attend the course and rather want
to study on my own.
Thanks.
Steve
_
Do You Yahoo!?
Get your free @yahoo.com address at ht
Licensing. Un restricted cost more because the licenses are
unrestricted.
regards.
-Original Message-
From: fmxiao [mailto:[EMAIL PROTECTED]]
Sent: Monday, December 04, 2000 6:54 PM
To: [EMAIL PROTECTED]
Subject: differance between two PIXs
what is the difference between the PIX 515R
Per request, I've made the congs on the switch and the MSFC available.
http://www.jpj.net/~benh/msfc.txt
http://www.jpj.net/~benh/cat6k.txt
In this config, vlan200 is the vlan I'm messing with. All the other vlans
are in shutdown right now.
The port on the cat that the vlan is connected to is
Hi Motor_5
This sounds like a great deal but if you read their terms, you notice
that you MUST RETURN a reply card that you will get about every 3 weeks
in order to NOT BE SENT any books that they have called the selection of the month.
That's a stamp every time and very annoying to have books se
Hi group,
i am happy to announce that i have passed the CIT today and finally got my CCNP.
The CIT covered Troubleshooting models, Cat 5k & VLANs, TCP/IP, Novell (quite a lot of
questions), Token Ring, ISDN, FR and
Appletalk (very few questions), CCO related stuff. Knowing the various shows and
Sorry, I overlooked the ? in the expression. That would allow AS1.
MLC
Jaeheon Yoo <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
>
> I quite agree with vtam,
>
> From p.376 of "Internet Routing Architectures" Sec. Edition,
>
> ip as-path access-list 4
Anyone has a list of Links for CCIE Written Exams, I nedd some
kind of question & answer.
Thanks
use -> "session x" where x is the slot that your sup module is in.
Slot 1 or 2 is the catalyst engine and slot 15 is the logical slot for the
IOS software.
>
>Any body knows, how to change the Mode operation from Catalyst Supervisor
>IOS mode to Catalyst Softaware on Catalyst 6509?
>
___
I would definately look at the Aironet wireless bridges that Cisco sells, if
you have line of site? I have installed 2 at work and am about to install 8
more. They do everything that is advertised so far. I have had no problems
with them. Feel free to email me directly if you have any questions
At 5:22 PM -0500 12/4/00, Greene, Patrick wrote:
>
>
>You need to enable routing for that VLAN interface with the mls command.
>
>
>Example
>interface vlan 200
>ip address 10.1.1.1 255.255.255.0
>mls rp vtp-domain
>mls rp ip
Hmmm. According to the docs, MLS is enabled by default on the MSFC. I
On Mon, 4 Dec 2000, Rossetti, Stan wrote:
> Does anyone know of a way to implement 100BaseT between 2 buildings that are
> ¾ (~ 4100 feet) of a mile apart? I think the distance limitation per
> segment is 200 meters.
Use Fiber. If it has an MII/AUI interface use a fiber transceiver
brian
>
Is anyone from here going to be in San Jose next week?
I'll be there from December 9-15th, with the Lab on
13-14 and the U.C. Santa Clara practice lab on the
11-12. I'd love to grab a bite to eat and maybe swap
stories with anyone from this group which has given me
so much support.
Craig
_
expert.booksonline.com
Someone in this group gave me this website- I have recieved almost $140.00
in free books, just have to pay $18.00 for postage and taxes and buy one
more book at full price in the next twelve months. I am sure there are more
websites out there for Cisco books, that have a ba
Any body knows, how to change the Mode operation from Catalyst Supervisor
IOS mode to Catalyst Softaware on Catalyst 6509?
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAI
Anyone has a short list of CCIE Written very essential books?
Anyone knows a website that sells books for less than Amazon?
Thanks all
Atef
_
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosur
I am taking this exam on Dec 12 as a trail, I don't have the material but I
read Designing Network Security. It map pretty well to the course outline
but I am still not sure what will be in the exam.
Note that if you take this exam after 1.1.2000 you're not a CCNP-Sec, you
will have to take three
Have you checked the logs? Or watched real time as the calls come in
using "terminal monitor"?
You can see who is dialling you and the user name they are
authenticating by (assuming you are running PPP authetication CHAP).
--- Jerry Deer <[EMAIL PROTECTED]> wrote: > Hello Group,
> I have recie
1 - 100 of 108 matches
Mail list logo
