I knew that didn't sound right after I read it. Thank you for correcting me.
I checked it out by using a sniffer and the ICMP packet is encapsulated with
IP.
Thank you.
Scott
-Original Message-
From: Kent Hundley [mailto:[EMAIL PROTECTED]]
Sent: Monday, November 26, 2001 8:28 PM
To: [EM
See my comments below
cheers
Pat
""Chong Chun Wei (Central)"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
>
> I'm facing some problems with the AS5300 gateway. I suspect there is some
> problem when i try to monitor the resource statistic from the gateway.
Below
> i
US $80K to US $90K
Tim Booth wrote:
>
> > All goes well until the first CCIE candidate asks about money
> and was told
> > its 60K (UK Sterling) no frills no overtime, maybe a car, but
> you only
> work
> > at one site. This to work in London, where CCIE used to
> command 100K+
>
> What's the eq
Hi guys,
Need your help to setup my Access server.
I need to setup My Access server router(16 ports) such that two different
users can get different access rights when access the Rack routers
(different routers)thorugh these Access server.
For example I want User-A to give access to only Basic
If your prepare for the Cisco CCNA, CCNP, CCIE Test it is very important
that you have "hands on" experience with Cisco equipment.
We provide you a Cisco hardware remote reantal service. You have access via
telnet or SSH to 4 Cisco routers in our rack for 11,5 hours for only 54 USD
(incl. TAX). Y
hi,everybody!
i want the 30 clients use modem to connect the 5300,use the E1 by MICROCOM
MODEM, a engineer told me about it,but i can't
ask him how to achieve it now! IMPORTANT is the modem is 9.6K,can i do it?
thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27439&t=274
As mentioned in an earier reply..you must have your DHCP Scopes correctly
set up
I've found that with NT4/W2k DHCP servers
that, If for example your DHCP server is set up to dish out addresses in the
range of 192.168.1.1 to 100 mask 255.255.255.0 and it receives a request for
an address directed
Dave said:
"The only reason for this I can fathom is because the DHCP request is no
longer a broadcast it now has the source address of the router interface
that the helper address is setup on and it seems DHCP will take this into
account when dishing out addresses."
That's exactly the assumptio
Hi All,
Can cisco mc3810 V3 with Digital voice module E1, operate
normally without HCM (high-density voice compression module).
How many Kb then will take every voice session ?
And can I use g729r8 codec (to get about 8 Kb per session) ?
Thanks in advance.
Regards,
Roman Gevorgyan.
Message
I am about to take this test, could anyone let me know the number of
questions and pass mark.
Cheers
Oskar
**
this message has been sent via the Internet. Internet communications
are not secure again
Try clearing the ARP's after changing IP's.
Shahram
On Mon, 26 Nov 2001, chris wrote:
> I have router on a stick configured between a Cisco 3600 and 4 Cisco 3548s
> that are trunk together and it is working OK. However, must all the 3548s
> have an ip address in the same subnet as vlan 1. I ch
After purchasing your product and failing the test, I purchased the Boson
tests and find the format superior.
Additionally the ability to download updates and have a more detail
explanation in the answer as well as a Cisco web reference makes Boson tests
a superior value. While your study guides
In a message dated 11/26/2001 10:25:31 AM Central Standard Time,
[EMAIL PROTECTED] writes:
> Subj:Several addresses on e0 interface [7:27328]
> Date:11/26/2001 10:25:31 AM Central Standard Time
> From:[EMAIL PROTECTED] (Roy Chowdhury)
> Sender:[EMAIL PROTECTED]
> Reply-to: [EMAIL PROTEC
Directly from CCO...
To forward the initial DHCP requests from the host to the appropriate
DHCP server, you should apply the ip helper-address command to the
interface which is receiving the broadcasts. After the broadcasts are
received, the Cisco IOS looks at the configuration of the ip
helper-ad
There's a brief mention in the CCIE Cisco Lan Switching guide by Clark in
the first chapters.
""John Tafasi"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Does any one remeber which one of the cisco press book covers Ethernet
> repeater classes? Your answer is highly apprecia
Move page file to different partition if you have one; delete all tmp files;
compress drive.
""Jeff D"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Any recommendations to free some space up on my server... I've already hit
> the log files.
>
> Thanks,
> Jeff
Message Posted
What about using the printed matter of the official Cisco
instructor-led MCNS course?
Any sights about this?
TIA,
Hugo
-Original Message-
From: fahim [mailto:[EMAIL PROTECTED]]
Sent: terca-feira, 27 de novembro de 2001 01:28
To: [EMAIL PROTECTED]
Subject: Re: Security Exams Textbooks R
If I recall correctly, the older 2500s had 2 meg
shared memory onboard that was seperate then the
regular DRAM. The newer 2500's don't have the seperate
2meg shared memory and take the shared memory from the
DRAM installed.
16meg is the max amount of memory to put in the 2501.
I can't recall a
He is teaching at
http://www.netmasterclass.net/Services/Training/training.html
Han.
--- Gus Hussein wrote:
> Does any one know Caslow's E-mail or where he
> works, he used to teach at
> Mentor.
>
> Does anyone know where he working now
>
> Thanks
>
>
>
>
>
> -
Hello ,
Thanks a lot for your help Ocsic and Oletu.
1) Besides the timeslot mappings what further configurations are needed.
2) How do i check the status of each 64kbps ckts on each time-slot on the
BERT meter ?
3) Can any one give me the complete configuration of the E1 PRI controller
confiurati
Swap the flash, load a TFTP server on your notebook, connect the
console cable and launch Hyperterm, reload your 1601, press ctrl+break
in Hypertrm, and:
rommon 1>IP_ADDRESS=192.168.200.100
rommon 2>IP_SUBNET_MASK=255.255.255.0
rommon 3>TFTP_SERVER=192.168.200.171TFTP_FILE=your_ios_image_file
Using TACACS+ comes to mind... this is what I ended up using. It is
possible to do something like this with the privilage commands but it was
not "granular" as TACACS. For example, I have a config set where the user
can do sho ver, connect, disconnect and couple of other commands. Nothing
else..
All,
I curently have 1/11/2002 scheduled to take the ccie
lab in RTP. I cannot attend due to an unscheduled
business trip. I would like to swap with a date
between 3/1/2002 and 3/28/2002. Please email me back
if you have a date in the range above and are willing
to swap.
Thanks,
__
Hello Pierre,
You are correct, the Simline 2 does not support SPID's but it will work
perfectly when you select the switch type on your router to NET3 which
actually emulates the basic call control of the newer ETSI Euro ISDN
network.
The Simline 2 supports ETSI Euro ISDN and is pre-configure
You do this via radius or TACACS
Dave
IT Guy wrote:
>
> Hi guys,
>
> Need your help to setup my Access server.
> I need to setup My Access server router(16 ports) such that two different
> users can get different access rights when access the Rack routers
> (different routers)thorugh these A
You can pull the flash card from the 1600 but this will crash the
router. I haven't done so in quite some time but I think you can pull
your old flash and install the new flash and it should boot up off the
frist file on the flash card. You can always add the "boot system flash
x" to CYA.
dav
Tom,
The best way (abeit not the easiest) to get this done is via TACACS. Set up
a TACACS
box with Cisco Freeware version (if you are a cheap skate like myself).
Furthermore, you
need to implement AAA authorization on the router for this to work. With
AAA aauthorization,
you can even restrict us
Thank you everyone for your answers. At first I was wondering if some
special config had to be done on the DHCP server itself, but that isn't
the case. Gaz, you're saying that DHCP takes the source of the request
into account when it dishes out addresses, and it looks like you're
right. The DHCP s
not to continue this thread to terribly long, but one COULD buy a newer
machine that is capable of bottign from cdrom, and boot linux that way...not
only would that stop any hack attempts, but would get rid of HDD failure.
-Patrick
>>> "Gaz" 11/22/01 04:59AM >>>
Thanks for all the suggestions.
The ip helper-address is the right direction. Are there any filters on
the WAN side, either on your router or at the ISP? You need UDP port 67
enabled for your setup to work. As for the ip forward-protocol command,
when you enable the ip helper-address, several protocols get forwarded,
not just dh
In short the answers are
1. Significance = none, Omitted = yes. I have seen some reference material
that says foir p[urposes of co-existance SNMPv3 engineID may be generated
from wiother IP or MAC address of device and passed in SNMPv1 message. BUT
there is no evidence yet this is being or going t
>Cisco Breaker wrote:
>>
>> I implemented OSPF load balancing but never done unequal load
>> balancing. My
>> customer wants Unequal loadbalancing on Motorola routers. As I
>> know Unequal
>> load balancing cant be implemented on Cisco without policy-map?
>> Any
>> suggestions or any info?
Thanks MADMAN and [EMAIL PROTECTED] Finally found the procedures
here..
http://www.cisco.com/warp/public/130/upgrade_index.shtml
-Original Message-
From: MADMAN [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, November 27, 2001 10:45 PM
To: [EMAIL PROTECTED]
Subject: Re: Help with upgrading 160
I'm wanting to install a honey pot on my network but don't know where to
start. Has anyone out done this and if so would please help me out?
[GroupStudy.com removed an attachment of type application/octet-stream which
had a name of Rodney Jackson.vcf]
Message Posted at:
http://www.groupstudy
To be honest, it just sucks right now economy wise. No big deal. The
business world is, as we all know, cyclical, and it will eventually come
back up. We didn't slide into this overnight, and we won't come out
overnight either.
Now is the time to study, get certs, go back to school and prop yo
I used the history function, and was able to playback a capture and watch
utilization, etc. Pretty cool. I modified the history function to update
once per second and it gave me a pretty nifty graph. Would exporting to CSV
and importing into Excel give me a better graph?
Another side question.
Check out dummynet (man dummynet) - I know it comes standard with FreeBSD,
and probably other *nix.
Andrew
""Ken Diliberto"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Mark,
>
> I've used MRTG for years. Unless they have made some serious changes to
it,
> it's still a moni
I'll agree with that last statement. It used to be CCIE ment you knew
your stuff and if all hell broke loose you could hang with the smoke.
People are getting their CCIE in an attempt to get big bucks.
I always here I need to get my CCIE and/or my MCSE to get into the
computer feild. That's what
dear all,
can the 4006 run on layer 3?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27472&t=27472
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure vio
Who know any firewall newsgroup?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27471&t=27471
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations
Rodney,
This is a good reference:
http://project.honeynet.org/
Also, this same group wrote a book about their experiences, it's pretty good
(except for the last 100+ pages which are just script kiddies IRC session.)
http://www.amazon.com/exec/obidos/ASIN/0201746131/qid=1006878122/sr=8-1/ref=sr
Pls advise how to config HSRP ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27474&t=27474
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations
Search www.cisco.com for HSRP and you'll find everything you need...
--
-=Repy to group only... no personal=-
""William"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Pls advise how to config HSRP ?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27475&
The URL below has some good info
http://project.honeynet.org/
H.T.H.
Dom Stocqueler
"Rodney
Jackson"
cc:
Here's an intro article:
http://www.smartpartnermag.com/article/0,3658,s%253D2003%2526a%253D15414,00.
asp
What is missing from the online version is the sidebar with the vendor info.
Back Officer Friendly from NFR Inc. www.nfr.net/bof
CyberCop Sting from Network Associates 1-800-747-3011
Deceptio
Thats so truethere has been a real dis-service done to many of the certs
and in truth, many of the training centers are responsible for this.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Steve Smith
Sent: Tuesday, November 27, 2001 10:12 AM
To: [EM
Does anyone have any experience yet with any CCIE Lab Prep courses that have
been revamped with the one-day lab in mind? I am considering training
companies for a first quarter 2002 class to prep for a April lab date. I
have been looking at a few groups, and I know the lab content hasn't really
Go to www.cisco.com and search for HSRP. You'll find more information
that you could possibly use. If you still have problems after you've
read through the configuration guides, let us know and we'd be glad to
help you through it.
Regards,
john
>>> "William" 11/27/01 9:30:05 AM >>>
Pls advise
Sure with a ws-X4232-L3 card and the license.
Steve
-Original Message-
From: William [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, November 27, 2001 10:23 AM
To: [EMAIL PROTECTED]
Subject: 4006 [7:27472]
dear all,
can the 4006 run on layer 3?
Message Posted at:
http://www.groupstudy.c
www.greatcircle.com
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
William
Sent: Tuesday, November 27, 2001 10:23 AM
To: [EMAIL PROTECTED]
Subject: Firewall newsgroup [7:27471]
Who know any firewall newsgroup?
Message Posted at:
http://www.groupstu
I use gnac.net. [EMAIL PROTECTED]
-Original Message-
From: William [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, November 27, 2001 10:23 AM
To: [EMAIL PROTECTED]
Subject: Firewall newsgroup [7:27471]
Who know any firewall newsgroup?
Message Posted at:
http://www.groupstudy.com/form/read
Part of the problem is caused by people who claim to be CCIE *without*
having done the lab. They have just done the written exam, and I have heard
one person say "The lab is easy, I just don't have the time"!
-Anil
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
- Original Message -
From: William
To:
Sent: Tuesday, November 27, 2001 4:22 PM
Subject: Firewall newsgroup [7:27471]
> Who know any firewall newsgroup?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27485&t=27471
-
Yes, with a Layer 3 blade.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
William
Sent: Tuesday, November 27, 2001 10:23 AM
To: [EMAIL PROTECTED]
Subject: 4006 [7:27472]
dear all,
can the 4006 run on layer 3?
Message Posted at:
http://www.groupstu
The number of questions is 100 with allotted time of 2 hours and you need a
755 to pass.
-Original Message-
From: Perez, Oskar [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, November 27, 2001 3:08 AM
To: [EMAIL PROTECTED]
Subject: CID test [7:27443]
I am about to take this test, could anyon
Hi everyone
I wanted to get advise for two configurations for ISDN
1)
I am facing an error on my ISDN bri connection .
I have got a static IP address from my ISP , when I give that IP to my bri
s/t interface I am able to connect and authenticate with my ISP but my
internal , ethernet users aa
Thanx for the info and the verification.
Scott
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]
Sent: Monday, November 26, 2001 7:25 PM
To: [EMAIL PROTECTED]
Subject: RE: ACL Gurus [7:27361]
"My understanding is ICMP is not a subset of IP or anything with IP
protoc
Check this out. I found it recently and I have never run across a more
useful site with more information regarding networking technologies,
Cisco-related products and capabilities, configuration guides, you name
it! The URL is:
www.cisco.com
Regards,
John (who apparently needs some more coff
Hey I can't find it! Did they just come online? ;-)
-junovtv
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27491&t=27490
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct a
DOWN WITH BOOT CAMPS :>
-Original Message-
From: William Gragido [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, November 27, 2001 10:52 AM
To: [EMAIL PROTECTED]
Subject: RE: What's it worth... [7:27400]
Thats so truethere has been a real dis-service done to many of the
certs
and in t
I wish you people would quit spamming this group with all these useless web
sites. Don't you know the only really useful site is http://www.cisco.com?
>>> "John Neiberger" 11/27/01 11:41AM >>>
Check this out. I found it recently and I have never run across a more
useful site with more informa
Oooops, the cats out of the bag. And everyone thought we where smart.
:<
-Original Message-
From: juno vtv [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, November 27, 2001 12:21 PM
To: [EMAIL PROTECTED]
Subject: RE: Absolute Must-See Cisco-related website [7:27490]
Hey I can't find it! Did
There is a really great .PDF on Cisco's site regarding HSRP. I would
recommend it!
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
John Neiberger
Sent: Tuesday, November 27, 2001 10:45 AM
To: [EMAIL PROTECTED]
Subject: Re: HSRP [7:27474]
Go to www.cisc
> Gated is embedded in all Unix platforms.
Are you sure? RouteD, yes. I've always thought I had to install GateD.
>If you're trying to make it work in Linux I'd suggest a book called
>LINUX TCP/IP Network Administration by Scott Mann, Mitchell Krell.
>It's a very good book but I put it aside
I have heard of that site (from somewhere...) but I don't have the time
to do all that typing into the web browser and then all that typing into
the search windows and sifting through the results and then reading and
trying to understand what the pages say...it's all just too time consuming!
I wo
i second & third that...ccie boot camps are a waste of time
-Original Message-
From: Steve Smith [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, November 27, 2001 10:38 AM
To: [EMAIL PROTECTED]
Subject: RE: What's it worth... [7:27400]
DOWN WITH BOOT CAMPS :>
-Original Message-
F
Steve Smith wrote:
>
> DOWN WITH BOOT CAMPS :>
Ya especially Ft. Jackson SC in July when you never been south of
southern Minnesota your whole life!!!
Don't tell my boss about the CCIE stuff ;)
Dave
> I'll agree with that last statement. It used to be CCIE ment you knew
> your stuff
TALBOT, WILLIAM P (SWBT) wrote:
>
> I have heard of that site (from somewhere...) but I don't have
> the time
> to do all that typing into the web browser and then all that
> typing into
> the search windows and sifting through the results and then
> reading and
> trying to understand what the pa
Gated is not embedded in all UNIX implementations.
""Howard C. Berkowitz"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Gated is embedded in all Unix platforms.
>
> Are you sure? RouteD, yes. I've always thought I had to install GateD.
>
> >If you're trying to make it work
Yah that site's great'n all, but here are some that REALLY have all the
answers:
http://3330661145
http://68265990
http://2355282214
Hal -Original Message-
> From: TALBOT, WILLIAM P (SWBT) [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, November 27, 2001 2:06 PM
> To: [EMAIL PROTECTED]
>
Yes Howard you are correct.
Dave
"Howard C. Berkowitz" wrote:
>
> > Gated is embedded in all Unix platforms.
>
> Are you sure? RouteD, yes. I've always thought I had to install GateD.
>
> >If you're trying to make it work in Linux I'd suggest a book called
> >LINUX TCP/IP Network Administr
This sort of job posting is extremely common here in the US. The
"CCNA/CCIE" thrown together as if they were all in the same league.
Do the tech managers not know that there is a huge difference, or is job ad
written up by some non-techie who had no idea of teh difference. If the
managers are a
Paul,
Thanks for taking the time to research this for our Veterans.
Prof. Tom Lisa, CCAI
Community College of Southern Nevada
Cisco Regional Networking Academy
Paul Werner wrote:
> For those who were looking for a more definitive answer on how
> much the Department of Veteran's Affairs would
and a Layer 3 license
- Original Message -
From: "Bill Carter"
To:
Sent: Tuesday, November 27, 2001 12:14
Subject: RE: 4006 [7:27472]
> Yes, with a Layer 3 blade.
>
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> William
> Sent: Tuesday
the simplest way is using a win 2k server configured with RRAS and NAT ,this
allows u to configure address pool ,also u have the option to configure nat
to act as a virtual dhcp server
Farhad
"NKP" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi everyone
> I wanted to get adv
The Cisco CID book covers this too.
Darren
At 11:23 PM 11/26/2001 -0500, John Tafasi wrote:
>Does any one remeber which one of the cisco press book covers Ethernet
>repeater classes? Your answer is highly appreciated
>
>Thanks
>
>John Tafasi
Darren
x$:0`0:$xx$:0`0:$xx$:0`0:$xx$:0`0
Pavlichenko are teaching new CCIE Lab Preparation courses - RS-NMC-1 and
RS-NMC-2. There is a class being held this week in Reston, Virginia.
Details, schedules, and outlines of the courses and an e-mail address
can be found at http://www.netmasterclass.net.
Note - I am affiliated with NMC.
Ch
Doing Lab exercises on a multi-router lab is essential in preparing for
the lab. Search the archives on the ccielab section where this question
has been asked and answered many times.
One recent post that may help you search:
"Subject: CCIE #8339
Date: Sat, 3 Nov 2001 20:34:58 -0600
F
For some reason this url obfuscation doesn't work in IE6...
--
-=Repy to group only... no personal=-
""Logan, Harold"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Yah that site's great'n all, but here are some that REALLY have all the
> answers:
>
> http://3330661145
>
>
""William"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Who know any firewall newsgroup?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27513&t=27471
--
FAQ, list archives, and subscription info: http://www
Use Dialer watch, which basically monitors a dynamically learned route
(eigrp/igrp) and if for the route disappears it activates the backup link.
Since it is not reliant on an interface status (which could be reported as
up), it would work in your case.
The other option is to use dialer profile,
PA-MC-STM-1MM 1 port multichannel STM-1multimode port adapter
PA-POS-OC3MM 1-Port Packet/SONET OC3c/STM1 Multimode Port Adapter
Thanks ,
Steven
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27515&t=27515
--
FAQ, lis
Hi
For MCNS Cisco course material, if you have one, then you will get 100%
questions from this book. For other exams say CSPFA, you will find 4
chapters in MCNS which is relevant, So if you pass MCNS you can pass CSPFA.
But I would suggest go for Pix exam first, then MCNS, VPN and last IDS. But
ov
I totally agree with Fahim. You have got to have the MCNS books to pass.
IT is like 40 of the PIX ADV and VPN tests.
Get a PIX though. You won't pass some parts of the PIX ADV with just the
book I think. You don't want to be a "paper" CSS1.
Do IDS last. Read Northcutt, study the material an
Guys,
Any help for good HP open view resources..I am new
to this performance tool and need to learn from bottom to top.
Thanks for help,
Tom
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message
David and all,
Thanks a lot for your reply and time..
Is there any way If I can do this without using External RADIUS/TACACS
server ,or by using just router commands???
Cant afford to use external server. :)
Thanks again.
>From: "David Tran"
>To: "IT Guy" ,
>Subject: Re: Typical Access
Are the latest shipping Doc CD's using the same format as the website
(dropdown menus) or are they still shipping the old website format?
My CD resources ran dry so I haven't seen an updated CD in quite
some time, but since CCD Online is always available, it's all good!
But I realize at some poin
> Hello all, I am having a problem that i am hoping someone who has had
> same experience can shed some light on. I have a laptop that i use at my
> office and at home through frame relay network to my office ( using dhcp )
> The problem i am having is the laptop keeps the default gateway of the
Look at the bottom of the route print, do you see anything under persistent
routes ?
> > Hello all, I am having a problem that i am hoping someone who has had
> > same experience can shed some light on. I have a laptop that i use at my
> > office and at home through frame relay network to my off
I passed the Wireless exam for SE's a couple of weeks ago. It goes without
saying, in
the current exam all of the questions are centered around the 350 series of
devices.
There were a number of questions that asked specific details but didn't give
a device
model and both answers (one for the 340
You can do what you want by setting the privilege on the users and the
commands you desire. No external server required.
Marc Russell
www.ccbootcamp.com
""IT Guy"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi guys,
>
> Need your help to setup my Access server.
> I need to
Does anyone have any pointers on getting a Cisco router talking to IAS
running
on a Windows 2000 server. I think I have everything configured
correctly and it is still not working. Thanks
Eric Hauptman
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=27525&t=27525
--
Jerry Deer wrote:
> > Hello all, I am having a problem that i am hoping someone who has had
> > same experience can shed some light on. I have a laptop that i use at my
> > office and at home through frame relay network to my office ( using dhcp
)
> > The problem i am having is the laptop keeps
Hi group
Do any one of you know about this exam Mcat+Qos, I just called up prometric
to book the beta exam, but they are saying its retired as of 26th of Nov,
but in the Cisco website its still showing as available,
Do you know which is the new exam for this, and where to find the info?
Fahim
CCN
PIX 501 and 506 are fixed firewall modules with only inside and outside
interfaces and as such you can implement DMZ with them. Your next bet is the
PIX 515.
Regards.
- Original Message -
From: Mcfadden, Chuck
To:
Sent: Monday, November 26, 2001 2:37 PM
Subject: RE: PIX 501 [7:27002]
I received this from the TAC newsletter; I thought some others might find it
useful.
-Sean
-
Cisco Technical Assistance Center
News Flash - November 27, 2001
http://www.cisco.com/tac
-
Index of All Cisco LAN Support
96 matches
Mail list logo