Guy's do we really need to discuss this more ?? Can't we just take
note that we all have different opinions and let's get back to all the
nice technical issues not the BORING subjects like these:)
PLEASE
-Original Message-
From: Howard C. Berkowitz [mailto:[EMAIL PROTECTED]]
From the original post, sounds like he was getting repeated messages of
that kind.
rfc3392 is the current release. 2842 is obseleted by 3392. It does say
in the last para of section 3,
The Error Subcode in the message is set to Unsupported Capability.
The message SHOULD contain the
My client, a telco., has two network logically and physically seperated. One
that handle the business aspect of the operation: Customer services,
billing...etc) and the other handles internet access, mail, office
automationetc. The question is should they integrate the two networks in
one?
Ravi,
Since this problem seem to be a problem on only this specific line
it would suggest that the problem could be a line problem. The other
devices that dial into the PRI (hub) would suggest that the central location
physical layer and equipment, is operating fine.
I would suggest that
Neil,
I'm a bit confused by your question. Your virtual-link should be
part of the existing addressing scheme. The few things to note here will be
as follows;
Where in relation to the RIP domain is the virtual-link?
What is the mask(/) of the points that identify the virtual-link
I
Dear All
%BGP-3-NOTIFICATION: sent to neighbor x.x.x.x 2/7
(unsupported/disjointcapability) 0 bytes
Thankx for you all for your participations and your solutions
And a reply on Vicuna last e-mail about this problem is that am getting
this msg repeated from over than 30 routers
All routers are
Ello Phil,
I just did the same - Got ill, got better, got a new job, and here I am back
on here again. Looks like theres a few of the old regulars still around ;)
TTFN
Lauren
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=60417t=60052
Hi,
I have installed ethernet module in 2600 router but it
is not detecting it. IOS version is 12.0.7.
Please advice is it IOS compatibility problem or else.
Regards
__
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
Anyone know what the differences are between the two? And where this may be
documented?
Many thx indeed
Ken Farrington
Global Networks, Barclays Capital, 5 The North Colonnade, Canary
Wharf, London, E14 4BB
Waleed Sami wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
My client, a telco., has two network logically and physically seperated.
One
that handle the business aspect of the operation: Customer services,
billing...etc) and the other handles internet access, mail, office
I would like to know if anyone has purchased this book and found it useful?
I know that I will need to use more than just this book to study. Just want
to know if it is helpful.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=60422t=60422
Dear all,
Does anyone know what's the difference for SVC and PVC? Can you give me some
e.g. in web site? or give me some config e.g? As my manager want us to
implement SVC for backup in case our DS3 down.
Another is how can I write program in Linux (using red hat v7.3) for MRTG. I
want to get
Yesterday, I received this from a spamer. I do believe some of the folks on
this list could be millionaires...if it is true.
*
Get Paid
For Your Opinions!
Earn up to $150
For an Hour of Work!
Find
One of the best switch reference investments you will make is if you buy
a copy of cisco lan switching by clark and hamilton.
pvst allows multiple instances of SPT within a switched network, ie. 1
STP per vlan. dot1Q allowed only 1 instance of SPT.
and of course they have different framing
great, thanks for forwarding us your spam considering we don't get enough of
our own.
JIm McDowell wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Yesterday, I received this from a spamer. I do believe some of the folks
on
this list could be millionaires...if it is true.
Hi,
I have lot of CCNP and CCDP stuff for sale. Exam guide, cram sheet etc.
Please let me know if you are interested in buying.
Thank for your attention.
Cheers!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=60410t=60410
--
Let me add one more thing.
What Larry failed to mention is that if you packed together all the
non-grads in the world, you would find that most of them turn out to be
losers too. In fact, I would strongly suspect that the percentage of
'losers' in that group of people will be significantly
Untrue.
http://urbanlegends.about.com/library/blellison.htm
An email text circulating since June 2000 purports to contain a
commencement address given by Oracle's flamboyant CEO, Larry Ellison, to
Yale's Class of 2000. Here's a snippet of that alleged speech:
As I look out before me today, I
Yet very strangely that while Larry Ellison dismisses the value of college,
the entire executive ranks at Oracle (except himself) are all graduates.
Larry could have hired whoever he wanted, so why isn't every manager at
Oracle a dropout? So apparently even he doesn't think the degree is
At 9:34 AM + 1/6/03, Waleed Sami wrote:
My client, a telco., has two network logically and physically seperated. One
that handle the business aspect of the operation: Customer services,
billing...etc) and the other handles internet access, mail, office
automationetc. The question is should
Hi,
www.cisco.com/go/module lists available modules for 2600/3600/3700 and gives
you minimum software requirement for each module.
--
Babak Farrokhi
Waqar Ahmed wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi,
I have installed ethernet module in 2600 router but it
is not
May I suggest, as a complementary or replacement discussion to
certification versus degree, a thread on the relative values of
butterscotch and chocolate? I have nothing against chocolate as a
means of getting in the door, but it takes subtle understanding of
butterscotch, how to avoid
Does anyone know the limit of VPN peers a PIX 501 with 3des is?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=60430t=60430
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct
What is the part number of the module? Is it a one port WIC style module
(WIC-1ENET)? That module is supported only by the 1700 series routers.
-Original Message-
From: Waqar Ahmed [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 06, 2003 7:01 AM
To: [EMAIL PROTECTED]
Subject:
Quoting Jimmy :
If you will given a choice, would you choose to go for
PhD in networking
area or juz stay in your field and pursuing profession
certification such as
CCNP/CCDP etc. Assume that both is fully sponsored,
can anyone tell me which
one will paid off in a long run?
Cheers!
Configure ip ospf network point-to-point on the loopback interfaces. They
will then be announced as their natural masks, rather than the /32 host
masks.
Debbie
On Sun, 5 Jan 2003, Bruno Fernandes wrote:
OK Rookie question
I have 2 routers connected with a PPP link (serial)
Router A in
Here's a tip: Since the simulation question(s) will most likely be on
configuring one of the routing protocols, you really need to know how to
completely configure them (please note that you need to know more about
configuring these protocols than what I have shown):
Configuring OSPF in a Single
I agree!
Sergio Silva
Networks Engineer
011-575-2743
Successful people have allot of latitude in their attitude
-Original Message-
From: Peri Sophos [mailto:[EMAIL PROTECTED]]
Sent: 06 January 2003 10:10 AM
To: [EMAIL PROTECTED]
Subject: RE: MBA/CPA/JD vs CCIE Vs. BS or MS degree vs
I think the answer is 10. I am not sure if this corresponds to a 10 user
license (in which case a 50 user license may allow 50 tunnels, but I doubt
it).
Peter
--On 06 January 2003 15:33 + Sam Sneed wrote:
Does anyone know the limit of VPN peers a PIX 501 with 3des is?
Message Posted
I've read just about every piece of Cisco propaganda regarding their Auto-RP
offering. I've also read up on Boot Strap Router (BSR). I'm in the process
of implementing IPTV and am at a bit of a crossroads. Here are my concerns:
With Auto-RP, there is no hierarchy between the Mapping Agents
Chuck,
I hate to say Me, too! but that's the case. I still hate the new
site with a passion. They swear that it's supposed to be easier to use
but it certainly is not, at least not yet. I'm sure we'll all get used
to it and they'll eventually fix all the links, but as it stands right
now I
Hi all. I have a Cat2950 running c2950-i6q4l2-mz.121-9.EA1.bin and I need
to know the command to make a port be be part of 2 VLANs.
Thanks.
-
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now
Message Posted at:
t09186a0080091b18.html
You can support up to 5 SA's with the PIX 501, regardless of user
license.
Also need the PIX-501-VPN-3DES= license to run 3DES.
Frank Jimenez, CCIE #5738
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Sam
PLEASE PLEASE PLEASE go to:
http://www.cisco.com/ciscodotcom/toolkit/submit_a_question.html
and submit dead links you run across to the support team under 'Report a
Broken Link'. Can't make it better if no one knows the problem is
there.
THANK YOU!
Frank Jimenez, CCIE #5738
[EMAIL PROTECTED]
I have to disagree. I think in new site very easy to find information
regarding technical characteristics of cisco products. I remember that in
the old one I had to do a lot of searching to get information of some
modules. But I agree with you that there are a lot of broken links and the
site is
I do not know any of my colleagues who like the new format.
I always choose the previous format by clicking Access Former Website
on the right column of the new home page.
Or go to http:// www . cisco. com/cco.shtml for the old good
familiar format.
-Bernard
-Original Message-
It's all on the web.
http://www.cisco.com/en/US/products/hw/switches/ps628/products_configura
tion_guide_chapter09186a00800c6f0c.html
Start with 'Configuring VLAN trunks'.
Good luck!
Frank Jimenez, CCIE #5738
Systems Engineer
Cisco Systems, Inc.
[EMAIL PROTECTED]
-Original Message-
On Sun, 2003-01-05 at 15:52, The Long and Winding Road wrote:
Some of us are just debating whether or not CPU utilization is the best
measure. Over what period? What other factors might be best brought into
the
mix of factors to consider?
I'm a big fan of delay as the key performance metric
On Mon, 2003-01-06 at 09:03, Cliff Cliff wrote:
Another is how can I write program in Linux (using red hat v7.3) for MRTG.
I
want to get the max point in each day (use 5 min as the reference point) of
MRTG for billing to our customer. How can I do as I am not familiar with
the
MRTG
The answer is 5. That is the maximum # of SAs. Remember, SAs are built
according to the match address in the crypto map statement. So if you have
5 separate tunnels to one peer, you are maxed out.
Josh
-Original Message-
From: Peter Walker [mailto:[EMAIL PROTECTED]]
Sent: Monday,
Hello folks,
Somehow I got into a back-to-back conversation with one of our colleagues
and nobody else has been responding. :-{} So I decided to repost with the
remaining questions. It's a production bank network, so he is hoping to get
some answers before trying anything.
Two 6xxx switches are
test
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=60449t=60449
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Chuck,
Were you asking about upgrading a router or selecting a new router as part
of a design. If it's upgrading, then the last sentence of Steve's message is
a good answer. If there are full Qs and/or Q drops when link utilization
isn't maxed out, then the router itself is probably the
It looks like my formatting didn't show up on the message below, which is
why the commands don't look right. Anyway, I'm sure you understood what I
was trying to get at!
Shawn K.
-Original Message-
From: Kaminski, Shawn G [SMTP:[EMAIL PROTECTED]]
Sent: Monday, January 06, 2003 11:20
is the port going to be a trunk or a access port ?
Cisco Newbie wrote:
Hi all. I have a Cat2950 running c2950-i6q4l2-mz.121-9.EA1.bin and I need
to know the command to make a port be be part of 2 VLANs.
Thanks.
-
Do you Yahoo!?
Yahoo! Mail Plus -
hi,
this is a java FEATURE ,...we run it on a sun E250 dual proc 1gb mem and
it goes very well..
once you have accepted the first security token and select grant always
the problem will go away ,,,
it is authenticating of sorts your PC .hell ...actually it is just
registering it for future
Priscilla Oppenheimer wrote:
Hello folks,
Somehow I got into a back-to-back conversation with one of
our colleagues and nobody else has been responding. :-{} So I
decided to repost with the remaining questions. It's a
production bank network, so he is hoping to get some answers
before
hey miss P
if you do a show trunk it should show you it`s native vlan that is the
one you are after ...
from CCO
The following example shows how to add a unicast entry to the table for
module 2, port 9, and how to add a permanent multicast entry to the table
for module 1, port 1, and module
Hi all,
Bought all my own equipment for a CCNP/CCIE rack and I wan't to get others
imput on the actual topology of the rack. What has motivated your rack
topology? Does you rack Mimic the CCIE 1 Day lab Rack setup? What would you
change or add?
The only thing I am missing is the 3550. Which
Hello I am new to the list, I would like to know if anyone in the Charlotte,
NC area would consider forming a study group to Prep for the CCIE written
and Labs, i am not quite sure if I want to do routing and switching or
security any suggestions would be appreciated, i can be reached by one or
Jimmy what are you asking for dollar wise
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=60460t=60410
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure
Hi all,
Basically, this question stems from Lab 1 of ccbootcamp.
1. R3 and R4 needs virtual link configured between them for R4 routes to
be seen in all the other routers.
I go to R3 and say area 3 virtual-link and in R4 area 3
virtual-link 10.34.1.1 . For the virtual links to come up,
not too sure if i agree with assigning it to the native vlan. i would
have been more incline to set it on the vlan it belongs. when you do a
show cam dyn|perm|static|system the vlanid is one of the attributes
shown - like a unique vlan:mac key pair (although mac addresses do not
have to be
hi chuck,,
yeah,
it is abit funny ,one thing also i noticed ,
that sometime i had to do a clear CDP table before this properly kicked in
all my 3548`s were ok ,but some of the older 2926MXL`s need that...
but i agree with you about the bug.number 1XX in an ever increasing list
of bugs
Good point!
-Original Message-
From: nrf [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 06, 2003 10:21 AM
To: [EMAIL PROTECTED]
Subject: OT - Re: CCIE Vs. BS or MS dergree [7:60347]
Let me add one more thing.
What Larry failed to mention is that if you packed together all the
Catalyst 5505 that is
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=60462t=60462
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL
Hello all.
I have just passed my CCNA and am starting on the CCNP.
I have a small lab at home that consists of 2 2501 routers.
What would you suggest I add to my lab to prepare for the tests?
Also just out of curiosity what kind of position should I be looking for to
get my foot in the proverbial
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
For example in
http://www.cisco.com/warp/public/707/ios_usr_rad.html
Is, like I said, ANOTHER ip range used than in the LAN.
Configuring Router to VPN Client, Mode-Config, Wild-Card Pre-Shared Key with
NAT
I dont like the new format either. Sent them feedback which included a
request for the ability to personalize my own version of CCO start page like
you can with Yahoo ala My Yahoo. They say that's in the works. maybe
something to look forward to
Bernard wrote in message
[EMAIL
I've been searching CCO most of the afternoon and can't seem to find the
correct URL. I'm looking for a way to allow a technician to reset ports on
a switch and look at interface stats, but not allow configuration access.
For example, I know that user level 15 is the same as having the enable
Don Kanicki wrote:
Hello all.
I have just passed my CCNA and am starting on the CCNP.
I have a small lab at home that consists of 2 2501 routers.
What would you suggest I add to my lab to prepare for the tests?
Some switches, especially a 3550 or two for the CCIE lab. Maybe get a 3600
HI guys
I need some help with a 3810 router that I lost the flash IOS Image, how to
recovery the ios image at rommon in 3810, I didn4t found this information
cisco web site, please help.
Regards
Rommel
- Original Message -
From: Don Kanicki
To:
Sent: Monday, January 06, 2003 7:42 PM
Folks
I have two 350s and one is configured as Root Bridge and the other is
configured as non-root bridge without client.
They connect two buildings together. No wireless client should be connected
to these bridges.
I forgot how to turn off the SSID broadcast. I am getting SSID on my
802.11b NIC
Hello all,
I am currently looking for the following voice modules fro my lab (I think
that's the cheapest way to go, please advice otherwise), if anyone has any
spare that they no longer needs, please let me know =)
2 of NM-1V (one for each of my Cisco 2620 router)
2 of VIC-2FXS (one for each
Try
http://www.cisco.com/en/US/products/hw/routers/ps1904/prod_instructions_
guides.html
Watch the word wrap!
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Rommel
Sent: Monday, January 06, 2003 6:44 PM
To: [EMAIL PROTECTED]
Subject: help with IOS
cog wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi all,
Bought all my own equipment for a CCNP/CCIE rack and I wan't to get others
imput on the actual topology of the rack. What has motivated your rack
topology? Does you rack Mimic the CCIE 1 Day lab Rack setup? What would
Frank Jimenez wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
PLEASE PLEASE PLEASE go to:
http://www.cisco.com/ciscodotcom/toolkit/submit_a_question.html
and submit dead links you run across to the support team under 'Report a
Broken Link'. Can't make it better if no one knows
I want to install Unity 4.0 and see Message Queuing 2.0 is required. I
know W2K comes with Message Queuing but I don't know if it's 2.0. How do
I determine its version? Thanks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=60478t=60478
Dave,
Priv. level 1 gives you basic show commands, etc.
level 15 is full access like you mentioned.
levels 2-14 don't have any special commands , but you
re-assign commands to these levels for different users
for example.
Theres also a priv level 0 which gives you close to no
commands on
Hi,
Just have a question over here. I would like use my domain account as a vpn
authentication login, how am I do that?
Thanks
Rgds,
Steiven
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=60480t=60480
--
FAQ, list archives, and
You should add a switch or two (preferably 3550's because that's what is
used in the CCIE Lab) and also start adding some more routers. I believe
that the CCNP exams still test on the Catalyst 5000/6000 set-based commands,
but don't buy a Catalyst 5000 (unless you have money to burn) since you'll
Comments inline...
--- The Long and Winding Road
wrote:
Waleed Sami wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
My client, a telco., has two network logically and
physically seperated.
One
that handle the business aspect of the operation:
Customer services,
On Monday 06 January 2003 06:24 pm, Firesox wrote:
Folks
I have two 350s and one is configured as Root Bridge and the other is
configured as non-root bridge without client.
They connect two buildings together. No wireless client should be
connected to these bridges.
I forgot how to turn off
Cisco Freeware TACACS with AAA authorization is your friend.
Williams, Dave wrote:I've been searching CCO most of the afternoon and
can't seem to find the
correct URL. I'm looking for a way to allow a technician to reset ports on
a switch and look at interface stats, but not allow
G'Day all
1). Have 2 routers at the moment connected back to back. can see each s0 int
on each router after the connection is up. For some reason, I cant seem to
start the ospf process across this link. The code I think is ok.
router a
interface Serial0
ip address 192.168.1.5 255.255.255.252
check the ip of router A serial 0. if I am reading correctly, you have a
typo in the ospf network statement.
--
TANSTAAFL
there ain't no such thing as a free lunch
John Brandis wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
G'Day all
1). Have 2 routers at the moment
John Brandis wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
G'Day all
snip the part answered elsewhere
Also, does OSPF make any assumptions about the network type if it is not
specified, and if not, what are the default settings for OSPF interface
network types ( hope that
Resolved, thanks Chuck
However, this is how I fixed it. I told the OSPF process on both router a
and b, to put the actual interface into the ospf process, and not just
listing the networks there. For example, I did on router b
Network 192.168.1.6 0.0.0.0 area 0 (which is the ip of my int s0)
John Brandis wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Resolved, thanks Chuck
However, this is how I fixed it. I told the OSPF process on both router a
and b, to put the actual interface into the ospf process, and not just
listing the networks there. For example, I did on
Router A:
network 192.168.1.6 0.0.0.0 area 0
typo in posting or typo in config?
hth,
Mark.
-Original Message-
From: John Brandis [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 06, 2003 8:29 PM
To: [EMAIL PROTECTED]
Subject: OSPF Question / Problem [7:60485]
G'Day all
1). Have
Hello all,
Does anyone have any strong recommendations for a billing system for an
enterprise-level AVVID deployment (1000+ users, distributed, multiple
cluster, etc.)?
I'd prefer suggestions based upon personal experience - the AVVID
partner page
Yes, you can [and should] do that [put static cam entry on the trunk
ports of sw2]. In fact, if you add an _additional_ firewall-- or for
better redundancy Dear Group,
Need your help in setting up the following :-
SETUP :- There are 2 core switches SW1 Sw2 (connected back to back
with
82 matches
Mail list logo