It might be time to open a support case.
Mike va3mw
> On May 22, 2016, at 1:11 PM, Don Plunkett <dp...@telus.net> wrote:
>
> This new version will not upload to my Flex 6300. I get a message to the
> effect that the software is incompatible with the radio. This happened with
I used Skype for years on my remote base and it was great if you take 10
minutes and do some basic port forwarding.
Remaud has NAT issues.
Mike va3mw
> On Apr 1, 2016, at 10:24 PM, K5VOU <k5v...@verizon.net> wrote:
>
>> On 4/1/2016 12:00 PM, flexradio-requ...@fl
redone for
other hardware platforms and uses
Are you saying there are other versions for the Flex-5000 not done by Flex
Radio? Can you point out where these versions of PowerSDR are available
for the Flex-5000? I am not aware of these
Thanks
Mike - KM0T
Bill,
...the radio actually powers down (power light goes out)? ...or the
software shuts down or locks up (again, big difference between shutting
down and locking up)?
Mike / W8DN
On 9/22/2015 1:47 PM, Bill and Sue wrote:
Hi Dudley
Have you forgotten me lolI know you said you were
radios. Just my two cents worth (and probably
worth less than that).
Mike / W8DN
On 8/14/2015 1:08 PM, pete M wrote:
Nice! And what about powersdr?
--- Message initial ---
De : Zack Schindler mrz...@gmail.com
Envoyé : 14 août 2015 12:37
A : Flex Radio flexradio@flex-radio.biz
Objet : [Flexradio
Drax,
I’m sure it is the equivalent of a “security key” for IP protection as well as
a convenient distribution vehicle. It’s also a way to provide updates by
plugging the fob into your internet-able computer.
Best 73s,
Mike - W8MM
On Aug 14, 2015, at 4:19 PM, Drax Felton draxfel
In what way?
Va3mw
On Jul 30, 2015, at 1:34 PM, Samuel Strongin kf4...@embarqmail.com wrote:
There is no comparison in performance between DEMI And Elacraft , the DeMI
is much better ,
Sent from my iPhone
On Jul 30, 2015, at 1:25 PM, Tom Warren mtn...@hartcom.net wrote:
Don’t
I don't have a 6k but while looking at the link below I stumbled across
this:
http://k6tu.net/ipad/k6tuc-tips.html
The only 'gotcha' with this is, you have to have an iPad to run his app.
Mike / W8DN
On 7/31/2015 1:59 PM, Jerry Flanders wrote:
See:
https://community.flexradio.com/flexradio
1W. Likewise, if I set my output to 20, I will see a little over 20
watts on the wattmeter but only about 2 watts on the TX Meter. This
holds true for my dummy load as well as my matched transmitting antenna.
Any idea of what I have wrong?
Thanks,
Mike / W8DN
...and you can do basically the same thing with your 5K if it has the
2nd receiver.
Mike / W8DN
On 7/14/2015 6:12 PM, James Hurry wrote:
John,
Yes, you can do diversity receive with the Flex 6700, SmartSDR and two
appropriate antennas.
73,
Dudley
Sent from my iPad
On Jul 14, 2015, at 8
.
Flame suit on - go for it
Mike W8MM
On Jun 15, 2015, at 9:33 AM, petem...@hotmail.com wrote:
Simple put Ian ,many ham are just appliance operator or some have too much
money. Like the one that did à review on the ic-7800 and stated that he
bought à second one and left it in the box
Seem to remember something about the mic common lead vs the shield
connections and RFI or is that just on the legacy radios?
Mike / W8DN
On 6/14/2015 1:36 PM, Dave wrote:
Should be the Heil CC-1-Y cable.
4 pin XLR to 8 pin Yaesu.
Dave wo2x
On 6/14/2015 1:30 PM, David Fisher wrote
reason you want to work 2 meter FM with the 1500? Are you
also interested in 2m CW/SSB because a new transverter will cost you as
much or more than a dedicated 2m FM rig and won't be nearly as convenient.
Mike / W8DN
On 4/27/2015 3:55 PM, geo...@gloria.us wrote:
transverters from Elecraft
(not the first time there either
;-() ).
Mike / W8DN
On 4/15/2015 8:41 PM, William wrote:
Up in the attic of my house I have an old AEA Isoloop antenna that I had used
successfully at another QTH. I've been thinking of trying it out to see if its
omnidirectional pattern would do better
(not the first time there either
;-() ).
Mike / W8DN
On 4/15/2015 8:41 PM, William wrote:
Up in the attic of my house I have an old AEA Isoloop antenna that I had used
successfully at another QTH. I've been thinking of trying it out to see if its
omnidirectional pattern would do better
You need to choke the rf feed lines and your computer power cables to start.
That is were the rf is getting in.
Make sure you are using he right type of choke.
Mike va3mw
On Mar 26, 2015, at 8:12 PM, David Edwards w...@verizon.net wrote:
My Flex control is very sensitive to RF
SOLD, pending funds
$5 added to offset part of the shipping cost.
73; -Mike- K0JTA
On 3/11/15 2:51 PM, Mike Schwendeman wrote:
I have a REPAIRED RFIO board for sale; I used to have two Flex-5000a
units, now have sold both.
The K1 switch went bad one day; I ordered and installed
traces or circuits. The spare K1 switch is also
included.
I would like $50 for the board, which has all of the SO-239 and BNC
connectors installed. The unit is RFIO series 34C. (-Lots lower cost
than a new one; I think I paid $189, plus shipping for my replacement
board!)
73; -Mike- K0JTA
.. Conventional
knob radios now seem flat to me. Mike W1BFA
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
flexradio-requ...@flex-radio.biz
Sent: Monday, March 02, 2015 1:00 PM
To: flexradio@flex-radio.biz
Subject: FlexRadio Digest, Vol 119, Issue
Sorry, don't have the info at my fingertips but 'Google' is your friend.
Mike / W8DN
On 1/9/2015 3:33 PM, Bill Hickey wrote:
Anyone,
Having no luck setting up CW Skimmer on Flex5000 any settings? My
environment is Win7, PwrSDR v2.7.2, VAC 4.14, CW Skimmer trial 1.8.
Thanks,
73
and no other programs are running in the background. I
am never connected to the internet when the crashes occur.
Any ideas would be appreciated.
Mike, W0RSR
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http
to mess around adding a capacitor.
Thanks,Mike KF9AF
On Sunday, November 23, 2014 10:31 AM, Bill Guyger bguy...@yahoo.com wrote:
A couple of separate answers:
- Capacitors in series do roll off the lows, but if you pick a cap whose
reactance at one octave below the lowest frequency that you
Anyone else use earbuds? I've used a set for years with my Flex 3000. I
now have upgraded to a FLEX 5K and when I stuck my earbuds in for the
first time, they were very warm. I thought I had them leaning against
something warm in the shack, but after sitting on the desk for 10
minutes, they
the original
box, but it will be packed in 1 bubble-wrap and shipped insured for
purchase price.
This radio is sold as-is, but it works perfect and is guaranteed not to be DOA.
Contact me via: fatfend...@sbcglobal.net ...I can provide pictures with my call
and date in the photo.
Thank you,Mike
an extra 20 dB of gain
in the system — thereby the 20 dB greater OUTPUT noise floor.
Vy 73,
Mike - W8MM
On Nov 20, 2014, at 2:04 PM, Bill Tynan billandmat...@windstream.net wrote:
I am baffled.
Here's what I have:
Flex 5K
DEMI transverters for 222 and 1296
I have set
An official response has been published on a Flex community page :
https://community.flexradio.com/flexradio/topics/flex-3000-is-gone
73 de Mike W9OJ
On 10/6/2014 10:16 AM, Alan wrote:
It appears here, part way down the page:
http://www.flexradio.com/amateur-products/flex-series/powersdr
Greg, thank you for the input. I am out of town for a few days. When I
return, I will try it out.
Mike, k6zsr
On 6/2/2014 7:52 AM, Greg Jurrens wrote:
is to LEGACY.
1. Go to Device Manager
--
I consider that our present sufferings are not worth comparing
with the glory that will be revealed
, I erased all past versions of SDR and their folders.
Then I did a clean install of sdr 2.7.2any ideas would be appreciated.
thanks, Mike, k6zsr
--
I consider that our present sufferings are not worth comparing
with the glory that will be revealed in us. Romans 8:18
Happiness is a direction
https://community.flexradio.com/flexradio/topics/dax_suggestion
73 de Mike W9OJ
On 5/26/2014 5:29 PM, Bernard Huth wrote:
This is a feature (for the moment). The present software does not
permit monitoring your digital audio. :-(
Bernie
W4BGH
On 5/26/14, 5:13 PM, Ronald G. Parsons
Did you order your 6300 before the hamfest and then pick it up there?
I ordered mine a full week before the hamfest and haven't heard a thing
back from FLEX.
I guess I should have just gone to the hamfest and bought one like
everyone else did.
73 de Mike W9OJ
On 5/22/2014 9:41 AM, Michael
You are not alone my friend...
Mike, K4EAR
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
David Edwards
Sent: Sunday, February 23, 2014 5:23 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] DSP NR
I have been using the Flex 5K
the
job. It is very amazing the impact common mode currents will do.
Mike va3mw
On Jan 13, 2014, at 10:28 AM, Marty w8ak...@gmail.com wrote:
I know this is a basic question; but I am stumped. Any help would be
appreciated.
Yesterday I put up my 160m L . I had used this antenna before
Make sure none of the tubes inside glow bluish, except for the voltage
regulators.
73 - Mike WA8BXN
---Original Message---
From: Dale Hankins
Date: 1/6/2014 1:21:53 PM
To: 'Ross Stenberg'; FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] S Meter minimum
Randy,
Do you have a list of your favorite instructional videos? Would be
most interested if you are willing to share the titles and/or links.
Inputs from others will also be appreciated.
Thanks.
Mike / W8DN
On 1/2/2014 5:37 AM, Randy Pence wrote:
Thanks for the help all
The bugs never get ironed out.
They just move around.
All software has bugs, especially when the code is this extensive.
Mike va3mw
On Dec 17, 2013, at 4:46 PM, Burt k1...@yahoo.com wrote:
Wise move
On Tuesday, December 17, 2013 4:29 PM, Paul Playford w8...@q.com wrote
Hi Tim,
Why is it we never get anything like this here in the UK or Europe?
The best we ever get is Full RRP over this side of the pond!
I'd love another Flex SDR but the prices over here are a killer ... any
chance of a SALE?!
MikeT.
M0AWS.
On 27/11/13 18:00, flexradio-requ...@flex-radio.biz
I've not used that program but here are some thoughts:
Using another receiver, do the transmitted packets seem to sound ok? If so,
try reducing audio levels, there could be a lot of distortion. Also, try
increasing TXDelay, the beginning of the packets could be getting cut off.
73 - Mike
allow for some amazing opportunities. Good luck on Sweepstakes
for everyone.
Mike va3mw
On Nov 1, 2013, at 1:33 PM, GARY HUBER glhu...@msn.com wrote:
You cannot pass any of the high end frequencies of the PR40. If your
transmission BW is 2.5 kHZ, and the low frequency roll off is 200 Hz
help.
73
Mike - KM0T
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http
Only thing to add to all the comments that have already been posted is
that the KX3 is a much better CW rig, if like me CW is your mode of choice.
On 17/09/13 18:00, flexradio-requ...@flex-radio.biz wrote:
Message: 1
Date: Mon, 16 Sep 2013 12:22:17 -0500
From: Craig Schroeder cra...@neb.rr.com
Nope, PSDR doesn't support that kind of set up as far as I am aware ...
but I could be wrong of course!
On 18/09/13 14:59, George Shapow wrote:
Hi all,
Is there a USB to Firewire adapter that anyone has used successfully with a
Flex 5000? I'm trying to replace the computer in my 5000C with
the PC to fix it, this is with a Flex3000.
For CW you will be much better off using an external programmable keyer,
much more reliable.
Best 73,
Mike.
M0AWS
http://www.m0aws.co.uk
On 04/07/13 18:00, flexradio-requ...@flex-radio.biz wrote:
Message: 2
Date: Wed, 03 Jul 2013 21:38:40 -0400
From: Ken
want to get your rig!
73 - Mike WA8BXN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge
. Wifi is also valid and was just
easier than running fibre through 125 feet of already occupied conduit. We'll
see what I need to do next after I try the WiFi solution.
All the best,
Mike
P.S. I was the 6'4 Hamvention red-vest-wearing volunteer sitting next to your
booth getting schooled
that it might work OK. If
it doesn't, I'll just have to get around to installing the fiberoptic cable
from by basement router up to the third-floor shack. That'll fix any network
problems and keep the magic smoke inside the equipment where it belongs.
Thanks all,
Mike - W8MM
On Jun 14, 2013
;-)
I'm using a Mac Mini with BootCamp and Windows 8.
Can I merely plug the FLEX-6000 into the vacant Ethernet RJ-45 on the Mac Mini
and have it work along side internet traffic via WiFi?
Cheers,
Mike - W8MM
___
FlexRadio Systems Mailing List
Stu,
Perfect! Thanks so much!
Best,
Mike
On Jun 4, 2013, at 9:28 PM, Stu Phillips s...@ridgelift.com wrote:
Mike,
Hope this helps - I'll put a blog post together at some point as I get a
lot of questions about the audio solution.
Stu K6TU
I think you will find that some open source software called jack will
do what you want, Split/Duplicate audio ...
Google is your friend ... or have a look here:
http://createdigitalmusic.com/2007/09/windows-does-jack-multi-app-audio-on-mac-linux-and-now-pc/
Mike.
M0AWS
http://www.m0aws.co.uk
and development plan along with the sales figures. That
way we can all decide whether to invest in such a venture.
Mike - W8MM
BTW, I manufacture EHF receivers for a living.
On May 20, 2013, at 2:50 PM, Les Rayburn l...@highnoonfilm.com wrote:
I disagree.
SDR changes the paradigm because
as user/beta feedback will guide the Flex team to refine the unused power of
the new FPGA in the 6XXX series. QSK CW will finally come to fruition as
well as the vagaries of PC 's throwing DPC's and RF ingress problems, I
hope.
Mike K4EAR
Mike K4EAR
-Original Message-
From: FlexRadio
Hi Ged,
I spoke to Martin Lynch and Sons yesterday, they've not had a single
delivery of the Flex6000 series but are hoping to get one soon, however
they have no idea when that one will arrive!
Mike.
On 13/05/13 18:00, flexradio-requ...@flex-radio.biz wrote:
Message: 7
Date: Mon, 13 May 2013
Hi Ged,
Grey import? ... He's not the UK importer.
Mike.
On 12/05/13 18:00, flexradio-requ...@flex-radio.biz wrote:
Date: Sat, 11 May 2013 19:15:42 +0100
From: Ged Wilkinson gedwilkin...@yahoo.co.uk
To: flexradio@flex-radio.biz
Subject: [Flexradio] Flex6000 Series in UK ...
Message-ID
Ged,
I'd only buy from a proper dealer/importer.
On 13/05/13 09:17, Ged Wilkinson wrote:
Hi Mike,
It could be a grey import if, as you say, he is not an official UK importer
for Flex. However on the website they do also claim to be a UK agent for
Martin Lynch who are an official importer
in UK ...
Message-ID: 518bfd8b.2050...@gmail.com
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
I recommend that you contact your FlexRadio dealer for more information.
Tim Ellison
On 5/9/2013 1:24 PM, Mike wrote:
Since I got no response am I to suppose they won't be coming
Since I got no response am I to suppose they won't be coming to our
little island over the pond ...
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
would be advantageous.
I'm also running at 13.1v DC and so am not over voltage, something else
I wondered about too.
I'll keep an eye on the temperature as I get more experienced with JT65-HF.
Thanks,
Mike.
On 06/05/13 23:24, FlexRadio Support, Dudley Hurry wrote:
Mike,
I did key down for 5
Any Flex Peeps like to comment as to when we are likely to see some of
the new models in the UK?
Mike.
M0AWS
http://www.m0aws.co.uk
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex
and plenty of air flow.
I've raised the F3K up so that it is further from the ATU below it to
see if some extra airflow around it will help at all as I noticed the
bottom of the F3K does get rather warm when in use.
Running at 5w what would be a normal temp range?
Mike.
On 05/05/13 20:33, Tim
Hi Tim,
Thanks for the reply.
Will the unit operate if I remove the cover to see if the fans are
working or not?
Or is there a safety switch that disables TX with the case removed?
Is there a test mode I can put the radio into to make the fans spin or
do I just need to get it hot again?
Mike
seems very high for such a low output level?
I have the fans set to come on at 35c in an attempt to try and keep the
temperature down.
Does anyone else see these kinds of temperatures running QRP?
Is this normal?
Do I need to be concerned?
Mike.
M0AWS
http://www.m0aws.co.uk
Hi Jon,
Is this true?
Martin Lynch and Sons wanted £25 for the TURF file?
How on earth can they charge that?
I got mine from Klaus for free ... surely the UK dealer gets it for free
from Flex/Klaus too or do they generate their own file?
What is FlexRadio's take on this - Tim/Dudley?
Mike
I would suspect a parallel port problem.
73 - Mike WA8BXN
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex
N6V is now on 14.268 Mhz; I snagged him, he gave me a 5-9, and I gave
him a 5-8. He is running POWER, and I am at 100 watts with a 75 meter
loop at 20 feet, just for info. That must be SOME RECEIVER in the
Flex-6700!!
73; -Mike- KØJTA
On 4/20/13 12:00 PM [Apr 20], flexradio-requ...@flex
a Legacy product.
Mike.
M0AWS
http://www.m0aws.co.uk
On 17/04/13 18:00, flexradio-requ...@flex-radio.biz wrote:
Message: 11
Date: Tue, 16 Apr 2013 17:42:59 -0400
From: TM tm.st...@verizon.net
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Re V2.6.4
Message-ID: 000501ce3aeb$5da17130$18e45390
Worry? Me? N :-)
On 17/04/13 18:18, Edwin Marzan wrote:
My SDR1000 is a legacy radio. Still works great!
Your FLEX3000 is not.
Do not worry, my friend!
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
For me legacy means old and no longer supported, especially in the
software world, where I spend most of my life, and since PSDR is
software ...
:-)
73,
Mike.
On 17/04/13 18:20, Greg wrote:
I don't think their use of the word legacy is meant in the context of
obsolete, even though
the Panascope and check to see if you are getting any spikes on the
scope when the panadapter pauses.
Mike.
M0AWS
http://www.m0aws.co.uk
On 16/04/13 18:00, flexradio-requ...@flex-radio.biz wrote:
Message: 13
Date: Tue, 16 Apr 2013 12:53:20 +0100
From: David Painter david.pain...@ntlworld.com
I listened to the video a few times and did not hear any obvious distortion.
73 - Mike WA8BXN
---Original Message---
From: Dan Baker
Date: 3/1/2013 10:55:17 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Distortion on my signal. Wave File Link
http
Bill, can you describe it a little more? What does it look like on the
panadapter? Do you get it 24 hours a day? Is it a click once every 1.5
seconds? How long does it last? Does the noise blanker do anything for it?
Do you live in farm country (Electric fence)?
73 - Mike WA8BXN
A tad different on an iPhone OM :-)
It only takes one second of thought and consideration ... nothing more :-)
On 22/02/13 22:33, Jack Haverty. wrote:
Another option is to get email software that is more suited to your
personal needs.
I happen to use GMail, and I'm quite happy with it. One
to, just like I have below!
73 and happy SDR'ing
Mike.
M0AWS
http://www.m0aws.co.uk
On 22/02/13 18:00, flexradio-requ...@flex-radio.biz wrote:
Message: 12
Date: Fri, 22 Feb 2013 01:31:46 -0500
From: Rod Lane lan...@cox.net
To: flexradio@flex-radio.biz
Subject: [Flexradio] TOO DAMNED MUCH
Message
I emailed a copy of my NOV to Klaus Lohmann on the 15/01/13 as requested
to get a new file to enable the new 60m allocation on my Flex3000,
never got a reply acknowledging the receipt of the email + NOV and have
heard nothing else since
??
Is this going to be the case for all future NOV changes??
Mike.
M0AWS
http://www.m0aws.co.uk
On 22/02/13 18:00, flexradio-requ...@flex-radio.biz wrote:
Hello Paul,
we are pleased that UK ham radio operators are now authorized to use the new
60m band. We want you to know that we are working
. I just have to convince my
Bride...
... And sell some other radios.
Mike, N0SO
On Feb 9, 2013, at 6:40 PM, Jerry Flanders jefland...@comcast.net wrote:
Did you attend? Can you give us a report?
Was a Flex- 6x00 working? Which of them?
Was it running a recording or real-time reception
You might look for such a setting in other programs you are using with PSDR
73 - Mike WA8BXN
---Original Message---
From: Ernest Garcia
Date: 01/30/13 16:23:16
To: flexradio
Subject: [Flexradio] Question
Wonder if the brains in this forum can help me
Hello Lisa,
I placed an order today. It was early eastern time and way before you woke
up (I assume). I haven't heard a thing and I am really looking forward to
receiving this mid week. Can you look up order number 2263-6363--4508 and
let me know where we stand please?
Best Regards,
Mike
certification how did this fall through?
Best 73.
Mike.
M0AWS
http://www.m0aws.co.uk
On 10/01/13 18:00, flexradio-requ...@flex-radio.biz wrote:
Message: 2
Date: 10 Jan 2013 07:17 GMT
From: Klaus Lohmann flexradio...@t-online.de
To: FlexRadio flexradio@flex-radio.biz
Subject: Re: [Flexradio
How accurate is his watt meter at 5 watts? If his meter is say 100 watts
full scale with 5% accuracy, it could be off by 5 watts giving the seemingly
low power output.
73 - Mike WA8BXN
---Original Message---
From: y...@aol.com
Date: 12/29/2012 10:13:41 AM
Bob
Did you confirm that it s not coming in on the mic lead?
Mike va3mw
On Dec 27, 2012, at 2:11 PM, Steve Sterling f...@sgsterling.com wrote:
Hi Robert-- the cheaper bead type designs, if configured properly, do work.
But a good one requires
a) 50 or more beads, 100 beads to use on 160M
What mic are you using?
Mike va3mw
On Dec 23, 2012, at 11:48 PM, Dave Gomberg da...@wcf.com wrote:
At 14:15 12/22/2012, Robert Costa wrote:
who has used what and what the results and over all costs have been.
I put ferrites on all cables, but what really fixed my RF ingress problem
ground strapped to the radio? Is the radio power supply
plugged into the same power bar as the computer?
Start simplifying things first and then add more bits.
Don't blame the radio as many others have great success. We just need to sort
out your environment.
Mike va3mw
On Dec 18
OK, ... what's the FHM-1 Flex Hand Microphone?
I can't find it in the flex-store.
Mike - W8MM
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim
Ellison, W4TME
Sent: Monday, December 10, 2012 8:05 AM
To: Flex Radio
Subject: [Flexradio
The current limiting of the power supply is well above 5 amps, so adding the
fuse might be a good idea. Otherwise, the supply should work fine.
73 - Mike WA8BXN
---Original Message---
From: Thomas Bewick
Date: 11/24/12 14:43:20
To: flexradio@flex-radio.biz
back to Win7 I would recommend trying to determine what is causing
the high DPC count (Video driver? WiFi driver? Malware scanner?). That way you
could watch for updates to the offending object in case you want to try Win8
again.
Mike, N0SO
On Oct 29, 2012, at 3:01 AM, Les Keppie les
and when power is off I would
not have a problem with that radio! If that is the case I may be able to
just not turn on other radios when running high power on one.
Thanks in advance!
73 - Mike WA8BXN
___
FlexRadio Systems Mailing List
FlexRadio
Tell us more on what is working ... Or not.
Are you using a com port replicator?
Mike va3mw
On Aug 28, 2012, at 6:09 PM, Ronald G. Parsons w5...@w5rkn.com wrote:
I have been trying to use SatPC32 and Ham Radio Deluxe with PowerSDR 2.3.5
using both CAT ID = PowerSDR and CAT ID = TS-2000
already in the circuit with a piece that is 4 dB
longer.
I hope the above is a little bit more descriptive.
Cheers,
Mike - W8MM
-Original Message-
From: Bill Ockert - ND0B [mailto:n...@ockert.us]
Sent: Tuesday, August 14, 2012 10:48 PM
To: Mike Valentine; flexradio@flex-radio.biz
that is 4 dB
longer.
I hope the above is a little bit more descriptive.
Cheers,
Mike - W8MM
On Aug 13, 2012, at 5:22 PM, bearcreekcatt...@juno.com
bearcreekcatt...@juno.com wrote:
What about increased noise? I was educated that loss equates to
increased noise on receive.
de nx4e
On Mon
a few or 20 watts to drive weren't the
target when VU5K was designed. All the big gun operators were clamoring for 50
to 60 watts to drive their 3CX tube amplifiers without needing an
interstage driver amplifier. That was then and this its now. So what?
Please give it a rest.
73,
Mike
that's very thin and has about twice the loss of LMR-100
and can handle even more power. One would only need 22-25 feet of it for 4.0
dB @ 2 meters.
A little web browsing can be marvelous.
Cheers,
Mike - W8MM
BTW, we used to make precision terminations for 450 MHz testing by using a 100
ft
just love pads!
73,
Mike - W8MM
On Aug 12, 2012, at 5:32 PM, Lyle Fisher wrote:
I am trying to drive an amp with 20 watts with my VU5K. I can not get a
steady ouput from it. It will start out at 20 watts for a few seconds and
then it will slowly drop to 14-15 watts after 30 seconds. At full
when the DC power is applied.
Thanks and 73
Mike - KM0T
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz
didn't have to write any software.
73 - Mike WA8BXN
---Original Message---
From: Mark Lunday
Date: 06/10/12 15:44:53
To: flexradio@flex-radio.biz
Subject: [Flexradio] Remote control: looking for
Internet-controllableantenna switch
Looking for a 2 position switch
Model 418 Amplifier Questions
http://qrper.com/2011/10/ten-tec-answers-your-questions-about-the-model-539-qrp-transceiver-and-model-418-100-watt-amplifier/
*
QRPer: A QRPer would like the Model 418 to be easily interfaced
One assumes that this potential source has been exhausted?:
http://www.temwell.com.tw/Web%20catg%20toko%20replacement.htm
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Gerald Youngblood
Sent: Monday, June 04, 2012 9:52
their resonator
line going. Toko has always made parts for us on which one could rely in a
production environment.
Vy 73,
Mike - W8MM
On Jun 5, 2012, at 5:36 PM, Jim Jannuzzo wrote:
I understand that everyone wants to be helpful, but it would be disappointing
to think that Flex doesn't use
One sees plenty of T2FD lookalikes on the roofs of Federal buildings all across
America. ALE?
From: br...@lloyd.com [mailto:br...@lloyd.com] On Behalf Of Brian Lloyd
Sent: Monday, June 04, 2012 2:28 AM
To: John Swink
Cc: Mike Valentine; flexradio@flex-radio.biz
way. My rotator was
inoperative while PJ6D was in on 6 last summer and I couldn't quite make the
QSO on the ill-pointed 6 meter beam. I switched to the log and was able to
make the QSO off one of the many lobes.
Mike - W8MM
On Jun 3, 2012, at 7:26 PM, Chuck ONeal wrote:
Think log periodics
Mark,
First thing to do is read the suggestions in the release notes on some
parameters to set for the 1500. With even a modest computer you can make the
internal keyer work pretty well. Some decide to use an external keyer, that
works too.
73 - Mike WA8BXN
I subscribe to both of Flex Radio's reflectors.
I also subscribe to the Yahoo user group.
My preference (or VOTE): Keep the '6000 series postings on the FLEXEDGE
reflector.
(-Good, and logical suggestion, Gerald!)
73; -Mike- KØJTA
On 5/24/12 12:00 PM, flexradio-requ...@flex-radio.biz wrote
1 - 100 of 1010 matches
Mail list logo