I will be out of the office starting 25.07.2005 and will not return until
01.08.2005.
I will respond to your message when I return.
AHU FUSUN ERCAN
YAPI VE KREDI BANKASI A.S. / TEKNOLOJI YONETIMI
Tel : 262 647 10 00
Fax : 262 647 17 11
www.ykteknoloji.com
Bu mesajda, yalnizca muhatabini
The port 515 used to serve lpr protocol. You'ld find if your printer supports
direct socket connection and which port will be used. You can simply define
your printer as a lpr printer. In this case the 515 will be the default port to
be used.
Sun
-Ursprüngliche Nachricht-
Von: Yan Ying
The FSS, FSA works in basic mode.
Sun
-Ursprüngliche Nachricht-
Von: Yan Ying [mailto:[EMAIL PROTECTED]
Gesendet: Montag, 25. Juli 2005 07:16
An: IBM-MAIN@BAMA.UA.EDU
Betreff: InfoPrint Printway worked buy no real paper received
Hi,
We have setup InfoPrint server to print from
All,
During an abend analysis my LOGREC shows the address where
the error occured as n bytes into ECNDLL ie in extended PLPA.
Therefore ENDLL is name of the load module that contains number of Csects.
The address however is not in the dump,in such cases IBM manual MVS IPCS
Commands suggests us
Ed Gould wrote:
On Jul 24, 2005, at 3:11 PM, Ed Finnell wrote:
In a message dated 7/24/2005 1:57:25 P.M. Central Standard Time,
[EMAIL PROTECTED] writes:
What I don't understand is how, on a mailing list where we are all
ostensibly OS experts, some can be so oblivious to the basic facts
Peter Pfaffner wrote:
Radoslaw wrote (partially quoted):
As I understood the manual, the address space is marked as unusable
not to the end of life, but until all other address apces which
co-operated with my a/s are ended.
Am I right ?
Well Radoslaw, AFAIK quite close, but far more
Hi sun,
Thanks.
From you exprience,Direct socket connecttion is not a common protocol
that IP Printer support?Or what is the easy way to config a command ip
printer lpr or direct socket connecttion
The other question is in basic mode,why I cannot find dataset status
from the PrinterWay
Edward E. Jaffe wrote:
R.S. wrote:
BTW: I found spare *new* Hitachi drives (floppy disk drives, 2.4MB)
for $165. Orderable via Internet.
I thought they were 2.8MB drives.
No, they were 2.4MB. I'm talking about 5.25 2.4MB floppy drive for 3174.
It is not 3.5 2.88MB rarely used,
R.S. [EMAIL PROTECTED] wrote in message
news:[EMAIL PROTECTED]...
Peter Pfaffner wrote:
Radoslaw wrote (partially quoted):
As I understood the manual, the address space is marked as unusable
not to the end of life, but until all other address apces which
co-operated with my a/s are
From: mary george
During an abend analysis my LOGREC shows the address where
the error occured as n bytes into ECNDLL ie in extended PLPA.
Therefore ENDLL is name of the load module that contains number of Csects.
The address however is not in the dump,in such cases IBM manual MVS IPCS
OK! Maybe the word newbie is too hard, and maybe I must not use those
dangerous calls. I already found another solution...well, if fact the
problem was the error code supplied did not explain the real error. The
problem was I had a mistake constructing the label for the key, but the
error code
Good Morning Ed
Thank you for pointing me to the SCTXABCC-Field. The Sxxx/Unnn-values seem
to be stored in the low order 3 bytes of the field (in the form SSSUUU). But
I'll need your help concerning the meaning of the 1st byte and the location
of the reasoncode:
I ran several tests but couldn't
Certainly the socket connection is a common protocol but using a port number
other than 515. The required port number can be found in the printer manual.
For defining a lpr printer you need only the ip and a printer queue name.
You mean the dataset allocated in JES OUTPUT Queue, whose status can
On Mon, 2005-07-25 at 00:20 +0200, Peter Pfaffner wrote:
don't try to teach newbies the wrong things !!!
It's really dangerous what you are doing, especially if they (the
newbies) don't know the things you know.
When my kids were growing up, I knew that they'd try some potentially
dangerous
David Andrews wrote:
On Mon, 2005-07-25 at 00:20 +0200, Peter Pfaffner wrote:
don't try to teach newbies the wrong things !!!
It's really dangerous what you are doing, especially if they (the
newbies) don't know the things you know.
When my kids were growing up, I knew that they'd try
Chase, John wrote:
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of R.S.
[ snip ]
Me: Your job has CLASS=5 coded in the jobcard. We don't use
such class, please change it, you should use CLASS=A...
Him: Can't you change the JES ? My job is OK, I've got it as
final
Hi,
This is not usually my responsibility. However, what is the procedure for
re-allocating the plpa page dataset?
ILR005E PLPA PAGE DATA SET FULL, OVERFLOWING TO COMMON DATA SET
Thanks,
Craig
--
For IBM-MAIN subscribe /
snip
what is the procedure for re-allocating the plpa page dataset?
ILR005E PLPA PAGE DATA SET FULL, OVERFLOWING TO COMMON DATA SET
Allocate a new one. Change the PAGE specification in IEASYSxx, and IPL.
However, I only have a 1 cylinder PLPA page dataset, and deliberately
let PLPA overflow into
From what I recall, that message is okay. The performance guys at my shop
always made it overflow. That way they knew they did not have wasted space
in PLPA. So, AFAIK, unless there are new rules, I don't think this is an
issue.
Lizette Koehler
On Jul 25, 2005, at 8:18 AM, Craig Kittendorf wrote:
Hi,
This is not usually my responsibility. However, what is the procedure
for
re-allocating the plpa page dataset?
ILR005E PLPA PAGE DATA SET FULL, OVERFLOWING TO COMMON DATA SET
Thanks,
Craig
Define a new page plpa and point
We point a TN3270 session at ibmlink.advantis.com but today is doesn't
work.
After about 3 phone calls we think we have opened a problem with ATT.
Our firewall people say it isn't anything they did.
Is anyone else having problems, or is then a different address we are
supposed to be using
Phil Payne has some interesting comments on the new mainframes being
announced tomorrow by IBM. You can read them on his web site at:
http://www.isham-research.co.uk/mainframe_2008.html
http://www.isham-research.co.uk/mips_z9.html
The disclaimer on the 2nd link is kind of humorous.
Now
Could you please introduce me a good document or manual about EMC SRDF commands?
the manual you want is:
Symmetrix
SRDF Host Component for z/OS
Version 5.3.0
PRODUCT GUIDE
P/N 300-000-163
A05
or the equivalent for the version of SRDF you are running. I don't
believe this is publically
In a message dated 7/24/2005 10:29:03 P.M. Central Standard Time,
[EMAIL PROTECTED] writes:
For everyone's sake, why don't you refrain from making authoritative
statements when you don't know the subject matter. Also, if someone
suggests to you the possibility that things may not work the
I don't use TN3270 but IBMLink has a new look today. Most of us here
think it's an improvement.
Alan Schwartz
Assurant Shared Business Services
Lead Systems Programmer
Phone: 651-361-4758
Fax: 651-361-5625
Alan C. Field [EMAIL PROTECTED]
Sent by: IBM Mainframe Discussion List
We point a TN3270 session at ibmlink.advantis.com but today is doesn't
work.
Also not working for me. Says it can;t find the host ibmlink.advantis.com
I tried a ping, same thing.
--
Bruce A. Black
Senior Software Developer for FDR
Innovation Data Processing 973-890-7300
personal:
We has problems late Friday, and opened problem tickets with IBMLINK.
They sent new URLs, that did not work this weekend.
I was hoping it would clear up this morning.
Steve
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Alan C. Field
Sent:
Greetings,
How to do define a shared volume to place a shared cat. between LPARs ?
Sincerely,
Laurence
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET
At July 6, 2005 17:30, concerning Re: How to free up space from
delet, ibm-main [EMAIL PROTECTED] wrote (to Neil Duffee):
[snip] I have a customer that has just replaced all their disk with
the latest kit. But no PAV ...:(
Ours is not to reason why.
Ours was because PAV could only
Not clear what you perceive a 'typical open environment methodology'
might be.
A typical MF backup strategy is driven by the business needs and the
disaster recovery plan.
A 'versioning' plan might be one that gives users a number of PIT
backups to choose from. A real necessity for some user
Hi,
In gm130103 (system managed CF structure duplexing) it recommends that you
do not duplex CF structure data between CF located in different sites.
Because CF structure data is not preserved in a failover situation.
But I was under the impression a multi-site GDPS/PPRC environment is suppose
You also need to remember to set the software parm in HCD so that the Device
is online at IPL Time
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf
Of Knutson, Sam
Sent: Monday, July 25, 2005 11:55 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: a shared
Agree. We have wandered too far off. Time to end the thread. *NOW*
(Remember Darren's posting).
No last words, nothing. End.
Hal
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of R.S.
Sent: Monday, July 25, 2005 4:36 AM
To:
Thanks.
Another sysprog, no longer here, allocated 100 cyl for plpa and 50 cyl or
common. The common data set currently shown about 15% used.
Thanks,
Craig
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf
Of Bob Shannon
Sent: Monday, July
...
This is not usually my responsibility. However, what is the procedure for
re-allocating the plpa page dataset?
ILR005E PLPA PAGE DATA SET FULL, OVERFLOWING TO COMMON DATA SET
...
In this case, DON'T!
This has been the way to go (recommended by IBM), since before MVS/XA.
Allocate a
On 25-Jul-2005, [EMAIL PROTECTED] (Scott Rowe) wrote:
Don't think we'll see many converts unless they can offer a gaming
option, but the gamers are far out in front(as usual). The high
end games now run under DOS and manage the graphics and sound
themselves.
It seem rather strange to me
Any idea when/if it will be fixed. I've been accused of
curmudgeonliness before, but I really prefer the TN3270 interface to
ibmlink for basic tasks. Like AST, SRD, SIS
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Edward E. Jaffe
If you have SimpList installed, go into a regular member list and use line
command A to select a load module. This will give you an AMBLIST analysis
of the module. HTH,
Dave Salt
SimpList(tm) - The easiest, most powerful way to surf a mainframe!
Tsai Laurence [EMAIL PROTECTED] wrote in message
news:[EMAIL PROTECTED]...
Greetings,
How to do define a shared volume to place a shared cat. between LPARs ?
As suggested, check out Managing Catalogs. Also make sure that EVERY
system that accesses that volume has the unit defined as shared.
Is that recommendation in an IBM manual so that it satisfies management?
Thanks
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf
Of Ted MacNEIL
Sent: Sunday, July 24, 2005 8:00 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: ILR005E PLPA PAGE DATA SET
In a message dated 7/25/2005 12:14:36 P.M. Central Standard Time,
[EMAIL PROTECTED] writes:
Any idea when/if it will be fixed. I've been accused of
curmudgeonliness before, but I really prefer the TN3270 interface to
ibmlink for basic tasks. Like AST, SRD, SIS
Used to use Passport
what are you gaining by doing this ? I haven't found anything that supports it.
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED]
Behalf Of Craig Kittendorf
Sent: Monday, July 25, 2005 1:40 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: ILR005E PLPA PAGE DATA SET
By the sound of the conversations our network guy is having with
whoever he's talking to at ATT its going to be a long time. :)
I sounds like the support people don't know what TN3270 is, don't know
what
IBMLINK is ...
Gibney, David Allen,Jr [EMAIL PROTECTED]
Sent by: IBM Mainframe
In a message dated 7/25/2005 12:26:31 A.M. Central Standard Time,
[EMAIL PROTECTED] writes:
We have setup InfoPrint server to print from mainframe to IP printer
Xerox 405.We have successfully configurated Invertory
Manager,Printway,FSS,FSA and started server daemon.We defined direct socket
Alan C. Field wrote:
By the sound of the conversations our network guy is having with
whoever he's talking to at ATT its going to be a long time. :)
I sounds like the support people don't know what TN3270 is, don't know
what IBMLINK is ...
I've had this unfortunate experience before.
In a message dated 7/25/2005 10:36:12 A.M. Central Standard Time,
[EMAIL PROTECTED] writes:
It seem rather strange to me that you would omit the statement that started
this whole issue.
If I'd said PC-CD instead of DOS I'd be more aligned with the
EA catalog. Other than that I believe
Is that recommendation in an IBM manual so that it
satisfies management?
I know it's common practice to ignore the message, and we do it here, but
this is what IBM has to say in the messages manual for z/OS 1.4:
If both PLPA and COMMON page data sets are on the same volume, and
have been
Craig,
On Page 44 of the Redbook ABCs of z/OS System Programming Volume 2 there
is a discussion of this. Pub number is SG24-6982-00. Hope this helps.
Wayne Driscoll
Product Developer
Western Metal Supply
NOTE: All opinions are strictly my own.
-Original Message-
From: IBM Mainframe
The ispf 3.1 utility screen is great to print the stats of a pds by
member, how do I do this via batch?
Thanks,
Tracy
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED]
On Mon, 25 Jul 2005 13:40:26 -0400, Craig Kittendorf
[EMAIL PROTECTED] wrote:
Is that recommendation in an IBM manual so that it satisfies management?
From the ABCs of z/OS System Programming Volume 2 - SG24-6982
http://www.redbooks.ibm.com/redbooks/SG246982/06-069.htm
-Rob
quote
Page data
Hello: The manual
z/OS
DFSMSdfp Checkpoint/Restart
Publication No. SC26-7401-01
documents the restrictions about CHECKPOINTS and NAME/TOKEN services.
However, it is not clear from the manual if the CHKPT CANCEL service has this
same restriction. Does anyone know if you can have address space
From: Adams, Tracy [EMAIL PROTECTED]
The ispf 3.1 utility screen is great to print the stats of a pds by
member, how do I do this via batch?
Take a look at the ISPF service called LMMLIST and specifically the SAVE
option. Write a program to issue the call in foreground. Once you have it
On Mon, 25 Jul 2005 14:24:34 -0400, Adams, Tracy [EMAIL PROTECTED] wrote:
The ispf 3.1 utility screen is great to print the stats of a pds by
member, how do I do this via batch?
Tracy,
Check out this thread for various options:
http://bama.ua.edu/cgi-bin/wa?A2=ind0408L=ibm-mainm=207165P=187612
I've read the Message but that doesn't recommend 1 cyl PLPA. I've also seen
in a couple of other manuals that it can be ignored. I am still searching
the Performance Manual and the ABC's for this recommendation.
Thanks,
Craig
-Original Message-
From: IBM Mainframe Discussion List
Hi all,
I'm defining a new JESPLEX configuration and would like some advice.
The Workload is homogeneus and there is 4 boxes in the Sysplex, each
box different from other ones.
When you build Hold and Dormancy puzzle do you evaluate processor
high or do you consider the whole box ? Is Hold=0 and
I'm wanting to sort a file that contains the following data:
2123456789{ *E03
2123456789{ *E03
+1+2+---
2123456789{ *E03
2123456789{ *E03
2123456789{ *E03
2123456789{ *N03
2123456789{
Thanks!
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf
Of Rob Wunderlich
Sent: Monday, July 25, 2005 2:11 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: ILR005E PLPA PAGE DATA SET FULL
On Mon, 25 Jul 2005 13:40:26 -0400, Craig Kittendorf
[EMAIL
Does anyone know why z/OS still requires separate PLPA and
common data sets?
CONFIDENTIALITY NOTICE: This electronic transmission (including any
accompanying attachments) is intended solely for its authorized
recipient(s), and may contain confidential and/or legally privileged
information. If
Thanks Wayne, that's what I was looking for!
Craig
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf
Of Wayne Driscoll
Sent: Monday, July 25, 2005 2:04 PM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: ILR005E PLPA PAGE DATA SET FULL
Craig,
On Page 44 of
Well, if you have SAS, it can do it.
Otherwise IEBPTPCH can do it.
It all depends on the intent of the listing and the format you need.
There might even be something on the CBT tape that might provide you with a
PDS print function.
Lizette Koehler
I have had some great suggestions, just to be a little more specific,
what I am looking for is member name and last update fields. SAS and
the LISTDS commands provides the names but not the dates.
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
For the archive
DB2 support ask for a DCR to cover this issue. Will do this week.
Will also check with Websphere MQ support.
Roland
-Ursprüngliche Nachricht-
Von: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] Im Auftrag von
Peter Relson
Gesendet: Montag, 18. Juli 2005 13:23
Howard Brazee wrote:
I'm wanting to sort a file that contains the following data:
2123456789{ *E03
2123456789{ *E03
+1+2+---
2123456789{ *E03
2123456789{ *E03
2123456789{ *E03
2123456789{ *N03
...
Is that recommendation in an IBM manual so that it satisfies management?
...
Krikey!
I haven't seen that reco on paper since I took IBM's tuning course in 1982 or
'83!
-teD
In God we Trust!
All others bring data!
-- W. Edwards Deming
...
what are you gaining by doing this ? I haven't found anything that supports it.
...
One less page pack.
One less path to manage for paging.
-teD
In God we Trust!
All others bring data!
-- W. Edwards Deming
--
For IBM-MAIN
From: Adams, Tracy [EMAIL PROTECTED]
I have had some great suggestions, just to be a little more specific,
what I am looking for is member name and last update fields. SAS and
the LISTDS commands provides the names but not the dates.
LMMLIST will do what you want.
Dave Salt
SimpList(tm) -
On Mon, 25 Jul 2005 15:44:55 -0400, Adams, Tracy [EMAIL PROTECTED] wrote:
I have had some great suggestions, just to be a little more specific,
what I am looking for is member name and last update fields. SAS and
the LISTDS commands provides the names but not the dates.
The EXEC shown here:
Did you know that Friday is SysAdmin Day?
http://www.sysadminday.com/ http://www.sysadminday.com/
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET
How can I use a 3592 with the external label not equal the internal
label in a 3494 ??
Carlos Soares da Silva
AVISO
-
Esta mensagem e destinada exclusivamente a(s) pessoa(s) indicada(s) como
destinatario(s), podendo conter informacoes confidenciais, protegidas por lei.
A transmissao
On Mon, 25 Jul 2005 14:00:45 EDT, Ed Finnell [EMAIL PROTECTED] wrote:
If I'd said PC-CD instead of DOS I'd be more aligned with the
EA catalog.
...but the second part of the sentence would still have been absolutely
wrong.Of course, PC-CD really just means WinXP, so I guess you're
finally
I run some SAS and ICETOOL scripts against the TMC and blocking helped
performance significantly.
Bielskie, Stephen [EMAIL PROTECTED] wrote:I am about to do the same.
However, don't expect too much of a performance improvement, just a reduction
in the amount of space needed for each record.
On 25-Jul-2005, [EMAIL PROTECTED] (Frank Yaeger) wrote:
//S1EXEC PGM=ICETOOL
//TOOLMSG DD SYSOUT=*
//DFSMSG DD SYSOUT=*
//IN DD DSN=... input file
//OUT DD DSN=... output file
//TOOLIN DD *
SELECT FROM(IN) TO(OUT) ON(1,10,CH) ON(22,1,CH) LASTDUP
/*
How does this know that the
I converted to blocked in 5.2 over a year ago without any problems. The change
to R11 was also pretty transparent.
Tim Hare [EMAIL PROTECTED] wrote:I'm getting around to the CA-1 5.2 = 11
migration. We've always run with
the TMC unblocked (worked for us, ain't broke don't fix it, etc.) but
...
Or the recommendation means it's irrelevant, just ignore it ?
...
I don't know why the message is even pumped out, since this has been an IBM
recommendation
for over 20 years.
I say irrelevent.
I've been doing it since 1983.
Also, see page 44 in ABC's II (z/OS), as somebody else pointed
...
Does anyone know why z/OS still requires separate PLPA and
common data sets?
...
We have a work-around?
There are more important things for IBM to work on?
-teD
In God we Trust!
All others bring data!
-- W. Edwards Deming
Don't know when ibmlink.advantis.com will be fixed, but
204.146.168.209 works
Alan
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search
Howard Brazee wrote:
How does this know that the duplicated column that I care about is column
21?
I guess I don't understand what you're trying to do. For the records you
showed,
you were treating records with 'N' in 22 as duplicates even though they had
different
characters in 21 ('*' and
On Mon, 25 Jul 2005 11:21:54 -0500, Hal Merritt [EMAIL PROTECTED] wrote:
Agree. We have wandered too far off. Time to end the thread. *NOW*
(Remember Darren's posting).
No last words, nothing. End.
My apologies. I use the digest, and I had used the online search to find
Ed's replies by
In [EMAIL PROTECTED], on
07/25/2005
at 09:18 AM, Craig Kittendorf
[EMAIL PROTECTED] said:
This is not usually my responsibility. However, what is the
procedure for re-allocating the plpa page dataset?
The usual procedure is Don't. Just make COMMON large enough and let
LPA overflow. It used
Ted, et al,
As far as I recall this was not a performance recommendation, it was a
compromise. The intent was to save you from dedicating two volumes to the
PLPA and Common, by coming up with a least impact way of putting them on the
same pack. Note that there is a specific requirement to hand
Howard,
Welcome to your local Custom's Checkpoint. I believe that a few countries
have been using this technology to spot criminals and terrorists for a few
years now.
Ron
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Howard Brazee
thanks for advisement.
Try to utilize MVSCP in batch jcl to generate IOCP/IODF, what is the
exactly key word to use ?
sincerely,
Laurence
From: Knutson, Sam [EMAIL PROTECTED]
Reply-To: IBM Mainframe Discussion List IBM-MAIN@BAMA.UA.EDU
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: a shared cat
...
Your disk technology makes the single pack
PLPA/Common unnecessary nearly 10 years ago, so why continue to do it.
...
Channel pathing?
Why not?
If it ain't broke?
I have better things to do than to 'split up' things that have been together
for years.
My point was (all along): who cares?
Hi,
Thank you for your reply.
Yes,I can ping the IP address of the printer,the address was
showed in successfully transmit message we got from Invertory msglog.
from IBM menu,the major difference between LPR and direct socket is
LPR use a queue and direct socket use a port number.Then how to
Is there a CBT utility or the like that will make mass PDS member string
substitutions? E.g., for all members of a specified PDS, change all
occurrences of string1 to string2 ? This is too obvious not to exist
already. I'm sure I could write one but why re-invent the wheel.
(Additional options
Just another view of this discussion: It doesn't matter where the data
sets are in relation to one another. The probability of a page fault to
be resolved in the first cylinder of PLPA is very low assuming that the
PLPA is optimally packed.
The real purpose of the recommendation was
In
[EMAIL PROTECTED],
on 07/25/2005
at 02:24 PM, Adams, Tracy [EMAIL PROTECTED] said:
The ispf 3.1 utility screen is great to print the stats of a pds by
member, how do I do this via batch?
First, you can run ISPF in batch. Second PDS85[1] can display SPF
statistics. Third, there are lots of
...
If only the
message text of ILR005E were not so ominous and the messages manual
explanation were not so obtuse. (The sizing recommendations in the
Initialization and Tuning Guide should be revisited as well.)
...
BINGO!
And, Bingo was his name!
It should be ILR005I!
Never had to justify
Everyone else has had their say, why not me ...
I size the PLPA to not spill. Yes I oversize it, but as Ron is fond of
pointing, what's the cost of a few extra cylinders ???.
I pamper ASM - page-only volumes, good pathing, separate ranks. You name
it, ASM gets it.
But as far as PLPA is
I did find one on the CBT tape, but now I don't remember which one, and I
just shut off the work laptop, and I don't want to fire it up again today
g . At least I think it was from the CBT.
A quick scan of file 1 finds file #40. Hopefully someone will pipe up with
other options, otherwise
90 matches
Mail list logo
