No. I think you can chown the soffice binary to user and it will run as
user. I know I had the same problem in the past and was able to solve it
without a reinstall. Try that first.
Don J.
At 03:38 AM 5/19/00 +0200, you wrote:
David Olsson wrote:
I installed staroffice as root, now I
It should be /home/user/Office51/bin/soffice, as I recall.
Don J.
At 07:27 PM 5/18/00 +0200, you wrote:
On Thu, 18 May 2000, David Olsson wrote:
I installed staroffice as root, now I cant access staroffice
as user.
How do I do?
David in Sweden
Locate the binary that starts StarOffice
On Sun, 21 May 2000, you wrote:
Dear all,
I re-start my computer today. While I try to login from the KDE login
screen, the screen just flash once and seems the X reset, then bring me
back to the login screen.
There should be a hidden file in the home directories of both root and user
On Sun, 21 May 2000, you wrote:
Dear all,
I re-start my computer today. While I try to login from the KDE login
screen, the screen just flash once and seems the X reset, then bring me
back to the login screen.
I had this once. There should be a hidden file in your home directories of
Ich weiß nicht ob ich es Dir schon einmal gesendet habe.
Unter www.kisdn.de kann man eine Zugangssoftware herunterladen mir
der funktioniert die Einwahl Problemlos.
Ich habe davor auch versucht über Mandrakeuser.org manuell an die
Lösung zu kommen. Hat nicht geklappt.
Aber wenn Du Kisdn
quaylar and all,
Thank you so much. I will definitely have to check them out.
That sounds like the ticket I needed! I can't stand these fonts
in netscape either. Even larger they are pretty lame :)
yoy should also check you this link at justinux.com -
Hi,
i have 3 computers. All computers are Dual-Boot-Machines.
My Windows 98-Network is up an running. But i have trouble to bring
up the Linux-Network.
Each of the Networkcards are 10 /100Mbit. on my Desktopcomputers i
have D-Link DFE 530 TX and on my Notebook i have a PCMCIA-Card
recognized as
Ryan,
Thanks for your kind words of support. You say you are using Mandrake 7.
Does that mean you were able to get it (or part of it) installed? What was
the source of the floppy and/or text images were you using, and what were
their creation dates?
As an aside, rather than hitting Ctrl-C,
gcc can't create executables in kernel 2.2.14-15mdk?!
Although the modules can be created in 2.2.14-1mdklinus, they are
compiled for 2.2.14-15mdk and are still unusable!
Seems a padded cell wont be needed (close one though :-D ) .
I did the below and still nothing, then after about 1.5 hours I discovered
that the mouse was actually on ttyS3-com4 (hmmm ), but it didnt work
properly, very unresponsive and blocky. So began the proticol hunt.
Murphy helped me out
Hi everybody,
I recently found a 3com90x-1.0.0i.tar.gz. I noticed when installing
drivers, they will install should install into the proper area. Should I
copy this file to a certain directory?
I would like to update my drivers. However, I am new to the tar.gz
files.
Thanks,
Roman
Hi everyone, i have this funny situation at boot time my kernet does not
identify any scsi device but on saturday i was able to write a cd without a
problem because the cd record and Xcdroast identify my cd-r as a cd writer
and scsi device but i cant mount the cd-r to work like a cd rom
I'm pretty new to Linux, but not computers so please bear with me.
I began an install of Mandrake-Linux 7.0 this weekend, and I will agree that
DarkX is a very simplified install client. The only thing is that I had two
issues (actually more, but I solved those last night around 2 am), they are
Hi,
I'm having a problem with X configuration with Mandrake 7. I'm using a
S3 trio64V card on two different pentium 100 machines and all worked
well with Mandrake 6.5 but with Mandrake 7 everything goes well untill
the X server tries to start and then it tells me there is a problem with
my
I run getmail as a cron job and have it set to check the server every 10
minutes. It works greats, and is easy to configure. Here is the
excerpt from my cron file:
0,10,20,30,40,50 8 * * * * /home/monty/getmail-1.10/getmail -n
Hope this helps
Monty
On Tue, May 16, 2000 at 10:40:48PM -0700,
Hi,
I had an istallation of Win2000pro on my PC, and later I decided to
install Mandrake 7.02 on it. On installation I selected booting on the
disquette drive, but after making a disquette LILO "decided" to put
himself on the hard disk.
Now I can start a session with Linux, but if I choice
Dan,
I was having the same problem with my Matrox Card. It was listed in the
device list, but would not work. I scrapped the v7.0 install (completely
scraped) and reinstalled. After a 2nd try everything worked fine.
Other than that, I have no ideas.
Anthony
- Original Message -
From:
Hello
I have a server with Linux Mandrake 6.1, my server have 3 NIC's
with the first NIC i have't any problem, but with NIC's number 2 and 3
y can't config
this cards .( the cards are: 3com EtherLink III 10 Mbps 3c509B)
when i try the next:
ifconfig eth1
i get the next message:
"eth1:
boot with a system ( DOS , win 98 ) disk and use : fdisk /MBR then boot again and you
will boot from win 2000.
-Original Message-
From: jr bAz [SMTP:[EMAIL PROTECTED]]
Sent: Monday, May 22, 2000 11:51 AM
To: [EMAIL PROTECTED]
Subject:[newbie] Problems with W2K Mandrake,
Glenn Johnson wrote:
Hi all. I'm anxiously awaiting installation of a DSL line here at home. Are any
of you currently accessing the web with DSL? If so, was it easy to set up and
get on-line? How is it done?
Thanks a million.
Glennzo...
Took me about an hour, because I didn't change
Lesson #1. Any time you make changes to your hd make a back-up of any
info you do not want to loose.
To access Win2000 now use your installation CD and boot from your CD-ROM
drive.
If no one tells you how to remove Lilo realitvly simply I can tell you a
way to overwrite it that will work
Can anyone tell me if the Linux Mandrake Secure Server Edition contains
the same modules, programs, and possibily more as the Power Pack?
Luis
Chris, thanks for your advice. Here's my hand writing information :
I've purchased the box set of Mandrake 7.0 Deluxe 2 weeks ago and tried to
install into both my desktop pc notebook.
It's fabulous to see everything is inside the box. I can successfully
install it into my desktop, though it
I made and error in my typing. See below:
I recently found a 3com90x-1.0.0i.tar.gz file on the 3COM web page. The
file system is different in Linux compared to Windows NT. In which
directory folder should I copy this file to?
I would like to update my 3COM drivers. However, I am new to the
Dan,
Are you set up to some sort of @Home cable service? I am racking my
brains trying to configure my LANcity modem with my cable service
through Linux Mandrake 7.0. I can't believe it is taking so long?
I am ready to give up on this!!
Any ideas?
Roman
Dan Ferris wrote:
Glenn Johnson
On Mon, 22 May 2000, Thorsten Brenner wrote:
Hi Dave,
i am using D-Link Cards too. I have the Model called DFE 530TX a
10/100Mbit Ethernetcard.
Witch kernelmodul supports this Card? (In my opinion it is the
via-rhine) Is this correct.
But if it is correct, why does my Computer not
On Sun, 21 May 2000, Rodrigo Pinheiro wrote:
Hi...
I am having some trouble configuring my X...
Running SuperProbe I got: Server - SVGA and S3 trio 2D/3D, however I
dind´t go to make it run...
When it starts my mouse cursor appears as a white square.
How can I fix this problem ???
Thanks.
I
On Mon, 22 May 2000, Jason Miu wrote:
May 22 02:55:10 localhost sound: sound
May 22 02:55:10 localhost sound:
May 22 02:55:10 localhost rc: Starting sound succeeded
Would anyone kindy tell me whatz happented? Is it really the problem
about
the kaudioserver and anything else? Am I did anything
On Mon, 22 May 2000, Corrado wrote:
I suppose Netscape 6 in java-enabled.. Am I wrong?
Corrado
Would be strange if previous versions are java, and the newer is not...
Paul
)0(---)0(
Experience is something you don't get
until just after you need it.
On Sun, 21 May 2000, Fran Parker wrote:
quaylar and all,
Thank you so much. I will definitely have to check them out.
That sounds like the ticket I needed! I can't stand these fonts
in netscape either. Even larger they are pretty lame :)
Bambi
As far as I heard, the font problem is also
If I have just a list of RPMs I want to install, is there any way I can put
that file somewhere and have that be the default loaded RPMs for a base
install?
-=Ron=-
I am using mandrake 7.0 and have a soundblaster awe
64 card. The sound works fine after running soundconfig but the mixer settings
never save after I shut down and when I reboot the system comes on very loud. Is
there a way to save the mixer settings so when it boots it would not come on so
Just type the following at a console prompt: /opt/Office51/bin/setup
That will do the trick - also if your security is set to high/paranoid then the
script has a tendency to futz and you have to set it to medium.
On Mon, 22
May 2000, you wrote: It should be /home/user/Office51/bin/soffice,
You
can download Mixer
ftp://sunsite.unc.edu/pub/linux/apps/sound/mixers/mixer-2.3.tar.gz
Set it
up, and it should do the trick.
-=Ron=-
-Original Message-From: Frank Imbroto
[mailto:[EMAIL PROTECTED]]Sent: Monday, May 22, 2000 3:16
PMTo: [EMAIL PROTECTED]Subject: [newbie]
[EMAIL PROTECTED] wrote:
This is a pure newbie question:
Which application should I use to dial up to my ISP?
(I have Mandrake 7 complete installed, and my ISP is using dynamic IP and
dynamic DNS server, so I don't know nothing about that.)
Thanks for suggestions!
Assuming you're using
On Mon, 22 May 2000, Thorsten Brenner wrote:
On my Notebook the Card is recognized with IRQ3 and I/O 0x0200.
And the interface eth0 is up. The notebook can ping itself but when i
want to ping one of the desktop-pc´s (running Windows98 or Linux)
there are no results.
Config:
1. Windows 98 /
On Mon, 22 May 2000, Eduardo Arauz wrote:
Hi everyone, i have this funny situation at boot time my kernet does not
identify any scsi device but on saturday i was able to write a cd without a
problem because the cd record and Xcdroast identify my cd-r as a cd writer
and scsi device but i
Hallo,
wenn du dich mit Linux gar nicht so auskennst, ist wahrscheinlich doch besser,
wenn du den Rat von Thorsten Brenner annimmst und dir das KISDN-Paket von
www.kisdn.de saugst. Dies kannst du dann unter root im KDE-Kontrollzentrum
einrichten, du brauchtst eigentlich nur deine ISDN-Karte
This is a pure newbie question:
Which application should I use to dial up to my ISP?
(I have Mandrake 7 complete installed, and my ISP is using dynamic IP and
dynamic DNS server, so I don't know nothing about that.)
Thanks for suggestions!
Hi there,
I have a Diamond MX300 sound card with Aureal Vertex2 chip, and my Mandrake 7
doesn't support it.
So, I guess I have nothing can do unless I get a new driver from Diamond or
Aureal?
Or I can use some driver that can let my sound card work as a SoundBlaster?
Thanks!
Hi All
A new install of Linux-Mandrake 7.0, with networking set up by the
installation.
a 3Com905B-TX, recognized as eth0 using 3c59x, and coming up O.K.
Ping reads 'Network is unreachable'
Traceroute reads 'Can't find any network interfaces'
The same exact problem happened with a Kingston
On Sun, 21 May 2000, Romanator wrote:
Are you set up to some sort of @Home cable service? I am racking my
brains trying to configure my LANcity modem with my cable service
through Linux Mandrake 7.0. I can't believe it is taking so long?
I am ready to give up on this!!
I didn't have to do
Hello!
Is there a program for Linux for a simple *modem* terminal, a-la Windows'
HyperTerminal?
Thanks,
-- Koly
Hi,
Aureal released sound drivers for Linux. You can download them at www.a3d.com.
Aaron
At 02:09 PM 5/22/00 -0400, you wrote:
Hi there,
I have a Diamond MX300 sound card with Aureal Vertex2 chip, and my Mandrake 7
doesn't support it.
So, I guess I have nothing can do unless I get a new
I'm new here, so sorry if this repeats any threads.
Ok, I have a dual boot W98/Mandrake 7. Lilo defaults to Mandrake, and both exist
on the same HD. Everything was fine, but now Mandrake fails to boot, and the
following is what seems to be relevant from the boot sequence - after this it
Hi
I have an inspiron + replicator and want to install linux on it.
I've installed Mandrake 7.0 version.
All ok but network interface of replicator doesn't work!
Linux detect an intel 82557 but it seems that there is an intel 82559 in
replicator.
Another problem: I have a Xircom (RBEM56G)
Hi Aaron,
I checked the a3d site and I couldn't find the Linux driver.
Could you please point me where I can find it on that site?
Thanks!
Yue
"Aaron Zuercher" [EMAIL PROTECTED] on 05/22/2000 05:15:44 PM
Please respond to [EMAIL PROTECTED]
On Mon, 22 May 2000, Frank Imbroto wrote:
I am using mandrake 7.0 and have a soundblaster awe 64 card. The sound works fine
after running soundconfig but the mixer settings never save after I shut down and
when I reboot the system comes on very loud. Is there a way to save the mixer
settings
On Mon, 22 May 2000, Ron Greer wrote:
If I have just a list of RPMs I want to install, is there any way I can put
that file somewhere and have that be the default loaded RPMs for a base
install?
-=Ron=-
Hi Ron,
This sounds a bit two-sided.
A base install sounds like a new setup for
Koly
Yes. It's minicom.
Charles
- Original Message -
From: "Nickolay Belostotsky" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, May 22, 2000 2:07 PM
Subject: [newbie] Something like Hyperterm
Hello!
Is there a program for Linux for a simple *modem* terminal, a-la
It sounds like you may need to log into the server from a
client. I don't know much about Linux server systems, but from working with a
few others out there, I've noticed that the server is pretty much unusable as a
regular workstation. I could be wrong, so don't quote me, but I'd suggest to
Hello!
My current hard drive configuration is:
C: 4.5Gb, bootable, Windows98 SE
D: 4.5Gb, Windows2000
I have a dual boot system, and therefore use a Windows2000 boot manager.
I plan to shrink D: to 2.5Gb, and make a third and fourth partitions:
Linux's / and swap. Obviously, the Install will
On Mon, 22 May 2000, Nickolay Belostotsky wrote:
Yes. It is called Minicom.
Paul
Hello!
Is there a program for Linux for a simple *modem* terminal, a-la Windows'
HyperTerminal?
Thanks,
-- Koly
)0(---)0(
Experience is something you don't get
until just
First you must have 3dfx Glide drivers.
Then if your download was rpm open a shell and type: rpm -i
q3test-linux-1.07-glibc-4.i386.rpm ( or whatever rpm you have) This will copy
the files to the default location of /usr/local/games/q3 You can specify ypur
own directory by using the --root=/
add noauth in the ppp arguments area of kppp
--Original Message--
From: Eric Mings [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: May 21, 2000 4:30:49 AM GMT
Subject: Re: [newbie] KPPP doesn't work after upgrade to Mandrake 7
You neeed to put all of your setting back. I think it is
Hi there!
I have a problem with the configuring of my CD RW. I am currently
reading the MUO's
Howto on it, but I can't get beyond step 1. ls -l /dev/cdrom results:
lrwxrwxrwx 1 root root3 May 17 16:52 ?dev/cdrom -hdc
then i do
ls -l /dev/cdrom1 and getthe same except 8 May 22 13:38
Hi,
Thanks Paul, since I got the 800x600 to work properly (Linux gave me
1024x768 in its infinite wisdom, even though I asked for 800x600),
things are looking much better.
Now that I can read stuff, it is looking pretty good. The fonts
in X are abit jaggedy compared to the smoothness I am
kppp
-Message d'origine-
De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Envoyé : lundi 22 mai 2000 19:56
À : [EMAIL PROTECTED]
Objet : [newbie] Dialup
This is a pure newbie question:
Which application should I use to dial up to my ISP?
(I have Mandrake 7 complete installed, and my
I am still working out the @Home cable service connection problem. I
have been following everything to the ' T '. The server names are still
not recognized!! However, while in Linux, I noticed that my GeForce 256
card, and 3COM905c NIC share the same IRQ11. Could this be the reason
that I am
OK. So I've searched various help resources to find out why I can't use the
hd.img or txt_boot.img file on the mandrake_70-2 CD files to install LM 7.0
from my local hard drive. Only got two responses. Neither led to a
solution. Since there seems to be an error in the *img files, does anyone
[EMAIL PROTECTED] wrote:
This is a pure newbie question:
Which application should I use to dial up to my ISP?
(I have Mandrake 7 complete installed, and my ISP is using dynamic IP and
dynamic DNS server, so I don't know nothing about that.)
Thanks for suggestions!
Try using kppp...
Hi Trevor,
Do you know if that went under your 'Authentication', 'Finger', or
'Standard' services?
Thanks,
b/web
Wade
Trevor Reynolds wrote:
Wade,
I had to add the following line to my /etc/inetd.conf file:
ident stream tcp nowait nobody /etc/identd
1) Your Netgear card MIGHT already be picked up by the installer.
type "dmesg | more" at the prompt and " cat /var/log/dmesg " and see if it
is being picked up...
Also try "cat /etc/conf.modules"
If you see something like
alias eth0 tulip
the installer has already detected it, you merely
Hi List,
I downloaded PHP4 today and am wondering if anyone else is running or
going to run it as a module to Apache, and how they set it up to do so?
Also the ZEND engine is new to me so any information regarding its
install with PHP4 under Mandrake Linux is of keen interest to me.
Romanator wrote:
Dan,
Are you set up to some sort of @Home cable service? I am racking my
brains trying to configure my LANcity modem with my cable service
through Linux Mandrake 7.0. I can't believe it is taking so long?
I am ready to give up on this!!
Any ideas?
Nope, no ideas.
Unless something goes wrong the answer the answer is yes. You can also
do
it by adding Linux to your Win2000 boot loader.
You mean, I shouldn't install LILO?
And how do I add Linux to Win2000 boot loader?
Thanks,
-- Koly
On Tue, 23 May 2000, Nickolay Belostotsky wrote:
Unless something goes wrong the answer the answer is yes. You can also
do
it by adding Linux to your Win2000 boot loader.
You mean, I shouldn't install LILO?
And how do I add Linux to Win2000 boot loader?
Hi Koly,
You should first make a
67 matches
Mail list logo
