Pensa che non riesco pi a collegarmi. Qual'e precisamente la stringa che
usi? Sia quella d'inizializzazione che quella di chiamata.
Ciao e GRAZIE!
---
Demis Cortello
Via Crosere 99
33053 Latisana UD
Tel: +39 0431510204
Che stringhe comando AT usi per il tuo modem?
---
Demis Cortello
Via Crosere 99
33053 Latisana UD
Tel: +39 0431510204
?
---
Che stringhe comandi usi per il tuo modem?
---
Demis Cortello
Via Crosere 99
33053 Latisana UD
Tel: +39 0431510204
?
---
tra i pi diffusi:
sotto KDE ti conviene KDE Media Player (kaiman)
che suona pure gli mp3
poi c' xanim o MpegTV (mtv)
altri probabilmente li trovi facendo una
ricerca su http://freshmeat.net
Antonio
--
http://king.rett.polimi.it/~ant
Qualche titoli per un player MPEG, AVI ecc per linux oltre
Demis wrote:
Qualche titoli per un player MPEG, AVI ecc per linux oltre a RealPlayer?
Io uso Aktion, Xmovie, Xtheater e XMMS "equipaggiato" con relativi plug-in...
Corrado
Anche io ho questo scanner ...ma per il momento nisba!
Speriamo!!!
Luke
-Messaggio originale-
Da: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]Per conto di Massimo
Inviato: sabato 3 marzo 2001 17.17
A: [EMAIL PROTECTED]
Oggetto: [newbie-it] Scanner Mustek 600 CP
Tempo f si
Ciao,
ho problemi col comando kdvi (o, meglio, kshellview, da questo chiamato).
Qunado tento di aprire un file .dvi scoppia (compare una finestrona che mi
dice che l'applicazione ha dato segmentation fault). Ho Mandrake 7.2, kde
2.0. A qualcun altro e' successa la stessa cosa ? Con la
To all,
To create a boot disk to install Mandrake7.2:
In windows open the cdrom containing
Mandrake72-inst.iso, go to folder images and
copy cdrom.img into a formatted disk.
Cheers
Al
__
Do You Yahoo!?
Get email at your own domain with Yahoo!
ROFL!!
I'm 70% complete downloading it right now.
Abe
On Saturday 03 March 2001 13:50, you wrote:
To all you people!
I just downloaded 8.0 beta and let me tell you this OS is tighter than a 16
yr old girl, you guys should check out the new interface, it's outta this
world,
I remember seeing this neat graphical display the first time I booted
7.2
but haven't seen it since. If this was Aurora and it shows as installed
on my system(in KPackage) how do I get it to run automatically at
bootup?
Hi, all
After upgrading kernel to 2.4.2 on LM7.2 I got the following problem:
Dialup doesn't work anymore
Modem dials number without any problems, but after connection is established
pppd daemon dieds saying that kernel doesn't support ppp or cann't load
module, but I know for 100% that ppp
How do i connect one computer with MD 7.2 and one with win98?
at the momment windows is on an ipx network? will this complicate things?
please keep this simple. because any howto i find complicated.
Can't say I mind crude language or dirty jokes, but references of this kind
make me distinctly uneasy. :o/
regards
Daryl
To all you people!
I just downloaded 8.0 beta and let me tell you this OS is tighter
than a 16
yr old girl, you guys should check out the new interface, it's outta
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, March 02, 2001 4:22 PM
Subject: [newbie] Installing a netgear FA311 NIC...help!!!
Operating system: Mandrake 7.2
Network Card(NIC): Netgear FA311
I've tried several times to install this card.
Julio Gutierrez wrote:
To all you people!
I just downloaded 8.0 beta and let me tell you this OS is tighter than a 16
yr old girl, you guys should check out the new interface, it's outta this
world, still some bugs but I think the final release is gonna be one of the
best Mandrakes I've
On Sunday 04 March 2001 07:25, I wrote, and provided an incorrect answer
for which I am truely sorry for
I have one as my second network card, and it works, just follow the
following directions
1 - download the redhat 6.x driver from netgear, if you have problems
finding it, let me
Hi everyone!
I just installed Mandrake 7.2 and I find that i can`t play any midifiles.
When I opened Kmidi I got message "dev/sequecer busy, maybe another program
using it" or something similar. And when I tried to configure Kmidi it says
"can`t get any information from dev/sequencer". Any
On Sunday 04 March 2001 03:58 am, Andris Maziks wrote:
Hi, all
After upgrading kernel to 2.4.2 on LM7.2 I got the following problem:
Dialup doesn't work anymore
Modem dials number without any problems, but after connection is
established pppd daemon dieds saying that kernel doesn't support
hello
I am unable to make bzImage when compiling the 2.4.2 kernel.
Each time I get the message below.
Can anyone help me out...
Cheers
dooshaint
[root@]# make bzImage
gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -o
scripts/split-include scripts/split-include.c
On Sunday 04 March 2001 08:28 am, dooshiant % wrote:
hello
I am unable to make bzImage when compiling the 2.4.2 kernel.
Each time I get the message below.
Can anyone help me out...
http://mandrakeuser.org/basics/bsource.htmlpay particular attention to
the 'Needed Packages' section.
HEY !! I don't mind a crude joke, a little bad language perhaps but this is
just SICK ! How about a little respect for younger/female/parents on this
list ?
On Sunday 04 March 2001 12:40, you wrote:
Julio Gutierrez wrote:
To all you people!
I just downloaded 8.0 beta and let me tell you
On Sun, Mar 04, 2001 at 02:28:30PM -, dooshiant % wrote:
hello
I am unable to make bzImage when compiling the 2.4.2 kernel.
Each time I get the message below.
Can anyone help me out...
snip
In file included from /usr/src/linux/include/linux/string.h:21,
from
why does Netscape take more than 5 minutes to startup?
It says Reading file..
Is there some file I have to purge or something?
Sridhar Dhanapalan wrote:
I have posted detailed instructions about connecting to @home some
months back. You should be able to find them by looking through the
list archives at http://www.linux-mandrake.com. I have not had any
problems connecting to @home in at least 4 months (i.e. since
Bill Barto wrote:
I remember seeing this neat graphical display the first time I booted
7.2
but haven't seen it since. If this was Aurora and it shows as installed
on my system(in KPackage) how do I get it to run automatically at
bootup?
Log in as root. If you have Grub install open the
I have to reformat the WindowsME drive in my computer so I can reinstall
WinME (yet again!) for my wife. My question is the following, will my
reinstalling of WInME mess up the link that was made bby GRUB when I
installed ML on my second hard drive?
Aaron
--
Aaron Benedict
[EMAIL PROTECTED]
First things first again, thankyou all for responding so quickly. I have looked into trying your solutions posted in the past Sridhar, but still to no resault. I am not a very good writer but I will try to outline the things I've tried and the questions I have a little better. First of all
I issued the following command to print a man page:
man -t mkfs | lpr
and got the following messages:
/usr/bin/groff: can't find `DESC' file
/usr/bin/groff:fatal error: invalid device `ps'
Error executing formatting or display command.
System command (cd /usr/share/man ; /usr/bin/bzip2 -c -d
Aaron, I re-install Windows all the time. I currently boot
Win98/Win2000/LM7.1. What I do is make sure I have a current Linux boot disk
that WORKS. Then, after I do what I want with Windows I boot Linux with the
floppy, and as root issue /sbin/lilo. This will write LILO to the MBR and
you will be
1)Netscape in and of itself takes longer to open than one would
normally expect from an application. I would guess it is in
some part due to how bloated the program has become. I finally
gave up on Netscape for this very reason and began using Opera,
which opens almost instantly.
2)Some of the
Actually, Ebay is the way that I was first introduced to Mandrake. I got
Mandrake 6.0 for like, six bucks. Worked great. In fact they accidently sent
me two identical CDs so I was able to give one to a friend. Both were
bootable CD's and I still have them today.
I think three bucks is worth
HEEEPPP!!
I am trying in vain to print from SO5.2, and feel I am slowly going mad.
I have installe the printer when I installed Mandrake 7.2; the test-page
prints, and I print wothout problem from KWord or KSpread.
The printer as installed is listed in /etc/cups/printers.conf
If I
Hi folks, Im having trouble getting my SCSI card working on a new
install of MD 7.2. For some reason, I am unable to get it to see the card.
I have seen other posts showing the format I need to use to manually insert
the card (aha152x=0x340,11,7,1 the defaults for this card), but I
jose,
today i tested my wiring :
over the 15m BNC cable (with both T and resistors connected) i have 9 ohm
resistance.
T-conns are ok.
resistors have 58 ohm.
are this values ok ?
--quay
I am trying to add a new HP9150 IDE CD-RW drive to my L-M 7.2 system. I have
an existing CDROM (now the slave) and the new cd writer (now the master). I
can read both drives as IDE CDROMs in Linux, and I can read and burn CD's in
Windoze. I also have an Adaptec SCSI card and a small scsi
Hi,
I have a Conceptronic 56ET modem (it suports
linux).
The problem is that I can't configure the dial-up
because linux don't find my modem.It's is connected to COM1 (ttys0) serial port
in my computer.
I thought that linux usually finds the modem and
then you have to configure the
Renaud,
Only the Printer Configuration in DraxConf "sees" the installed
printers, all the other config progs fail to see them.
You'd said that you'd set a printer up, did you do so in
DrakConf, or is that what you mean by DraxConf? I'd had trouble
with this after the last (not the
I am running Mandrake 7.2 on a new PC from ASL and can not hear any Midi
output. The sound card is a Soundblaster Live! Value. ALSA is installed
and seems to be working. I can play .wav files. RealPlayer works. Gnome
desktop sounds work. Both Konqueror and KMid open Midi files and appear
to play
Well
you can give it a try from the command line with
insmod aha152x
aha152x=0x340,11,7,1,1,0,500,0
this
makes certain assumptions about the parameters that you are supplying of
course. In particular the IRQ (11) and the port (340).
If
this works then you can modify /etc/mod.config
Any body knows...
What can I do for clean the
history of Netscape?
THANKS.
Please send in plain
text not HTML and drop the color background
Thanks from
all.
As to your
modem.
If you have a PS/2
mouse it usesthe first serial port resources and take presidences to any
devives
actually connected
to said port.
Connect your modem
to the other port and it should
Any body knows...
What can I do for clean the history of Netscape?
I just do:
rm ./.netscape/cache/*
then:
rm ./.netscape/xover-cache/*
Meph
--
"I did this 'cause Linux gives me a woody."
-Dave '-ddt-' Taylor, announcing DOOM for Linux
I have Comcast@home and I always used the static configuration, but a techie that
was here last month
changed my line and my modem and reconfigured my windoze partition to use DHCPD.
I never had that working before under linux, but after searching Deja for usenet
information, I came across the
Hi, all,
which program takes care of the *.gz files under /var/log?
It compressed the logs every week, I guess. Can I change this to one week
or one month?
Thanks a lot, :)
Lonely
--
2B or not 2B, that's a question. :)
Go back to basics...
With your lan card you should have gotten a utility disk.
On that disk are two important programs (assuming that you are using a
10base2/10baseT card).
The first program sets up the hardware on the lan card. It allocates
IRQ's/IO, etc and permits you to test the settings.
I was setting up IP MASQ so that my internal network can access the
internet. I found information at the linux howto
documentation. Basically my problem was that it told me to add lines for
a firewall to the files /etc/rc.d/rc.firewall which i did. Then it told
me to add a line to
I have an Intel pro 100+ Network card (that's what windows idents it as)
and since I upgraded my mobo from an asus p5ab to a p3b-f I can't get it to
work
in linux at all. everything APPEARS to work fine however.
it is apparently detected and it USED to work... I even did a complete
reinstall
of
i had to reinstall win-95 on my second hard drive and it wiped out my lilo
boot, so now i have to boot with a floppy.
From: Aaron Benedict [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [newbie] GRUB Question
Date: Sun, 4 Mar 2001 11:02:42 -0500
I have to
Dear Jon; Are you running the Triden on an Epox MVP4F motherboard?? I'm
just in the process of setting one up with Mandrake 8 Beta. I'll get
back to you on this.
Dan LaBine
Registered Linux User #190712
Jon Doe wrote:
Does anyone have any links on info about getting LM 7.2 working with the
I am having trouble getting sendmail. I used drakeconf to find
what I need, but neither of my cd's seemed to have the files it
was looking for one was sendmail-rc. How can I get sendmail to
work, so I can use pine Robert Boggs
Next step is to go to:
http://www.rpmfind.net
Get the
I am debating to get a usb CDRW or get the IDE interior drive. I have two
questions:
1. How do I get my LM7.2 system to recognize the USB Burner
2. Any advice on which is the better buy...interior or exterior?
I don't think cd-writing on usb is a terribly good idea..
On this realm... kinda. I need to get my win98 partition off of my drive,
(hda1). I ghost the partition, image it to a new smaller drive, and find
that no matter what tricks I do.. Lilo still wants to boot the reimaged
partiton.
Any clues for the clueless are appreciated.
Steelhead
-
After configuring this printer several times I cannot get it to print.
When
I try to set it up in linuxconf it complains about a wrong printcap
file. If
I try to print a test page nothing happens. If I try to print from any
program
I get a message about "unable to open parallel port device file:
I do have static ip and gateway,
I also tried both with ppoe and withuot pppoe in DSL network of
Drakeconf
I also tried adsl-start
pppoe(timeout)
but still failed
I can see my eth0 by ifconfig
my kernel is 2.2.17, DSL modem is Cisco 678 isp is qwest
not work need help
Anthony wrote:
Robert,
Unless you REALLY want to use Sendmail, you will have to uninstall
postfix first. then you will have to reinstall all the sendmail packages
that are on your install CD's. If you don't want to go to all that
trouble though you can just as easily use Pine and Postfix.
To check your system
On Sunday 04 March 2001 19:42, you wrote:
I am debating to get a usb CDRW or get the IDE interior drive. I have two
questions:
1. How do I get my LM7.2 system to recognize the USB Burner
2. Any advice on which is the better buy...interior or exterior?
3.
so, i guess you will have to reinstall Linux and MAKE A BOOT DISK, this
time. right?
From: "Bill Shirley" [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: RE: [newbie] help can't get back in
Date: Sun, 4 Mar 2001 00:57:46 -0500
Can you boot from the install CD?
I started the Mandrake update to get the new cups packages and couldn't get
the job done. I got "cups conflicts with printpro-4.1.2-1 and openssl-devel
is needed by cups-devel . and ghostscript 55.50-33mdk is needed by
cups" or close to those words. So does anyone know what the
Mark, when I typed all that you told me to about postfix, I got the
following. postfix-19991231p108-5mdk. Tell me how to make that take fetchmail
to pine and how to load it. I really know very little about this program.
Thanks for helping, and replying. Sincerely Robert
On Sunday 04 March 2001 13:11, you wrote:
I usually don't pay attention to that type of comment, but this one
bothered me - and yes, there are lots of females on this list - can we
keep the bashing to MS and Gates and politics and leave the juvenile
pseuodo-macho statements at home ?
I looked through the archives and found a good deal, but nothing
releating to my specific problem.
After installing pronto I get
"Can't locate MIME/Types.pm in @INC" when trying to run it.
And it lists various directories, none of which have Types.pm. There a
several Types.pm on my machine,
the issue is in the netconf setting I expect. With a static IP and access
throgh a nic/modem setup... ppoe is not needed. Set it up as a standard
network. I did so for both home and office on Pacbell's flavor of DSL for
almost 2 years. I am now trying to futz with a cable modem... pumpd does
Meph, I have downloaded the two rpm files for sendmail. I found, however that
I do have postfix. Would I be better off running this? Also would it send it
to pine?
I agree entirely with philomena, but 1 question?? How many 16 year olds
does this guy hang out with? This guy sounds really old, so I'm
wondering what kind of deviate he might be??
Just my 2 cents!
Dan LaBine
Registered Linux User #190712
philomena wrote:
I usually don't pay attention to
Hi, when you run the kppp do you set the modem to
device to modem or ttys0 ?? I had to change mine to ttyso and then it picked up
the modem.
I hope this helps. I am not running linux
now.
Just
visiting this planet,Please sign the
Romanator wrote:
Bill Barto wrote:
I remember seeing this neat graphical display the first time I booted
7.2
but haven't seen it since. If this was Aurora and it shows as installed
on my system(in KPackage) how do I get it to run automatically at
bootup?
Log in as root. If you
I agree with you, he is one sick puppy. Don't they shoot sick puppies
anymore??
Just visiting this planet,
Please sign the Linux Driver petition
http://www.libranet.com/petition.html
http://ants.www4.50megs.com/linux.html
No, it is possible to recover from this, but the scope of this is somewhat
beyond what I can put in an e-mail. I think your best bet would be to find
a LUG (Linux user group, their listed on the www.linux.org web site) near
you and ask one of the local friendly geeks to help you out.
On Sun, 4
Renaud OLGIATI wrote:
HEEEPPP!!
I am trying in vain to print from SO5.2, and feel I am
slowly going mad.
I have installe the printer when I installed Mandrake 7.2;
the test-page prints, and I print wothout problem from
KWord or KSpread. The printer as installed is listed in
On Sun, 4 Mar 2001 20:31:40 -0700 (MST), Chris Cameron said:
I looked through the archives and found a good deal, but nothing
releating to my specific problem.
After installing pronto I get
"Can't locate MIME/Types.pm in @INC" when trying to run it.
And it lists various directories,
Robert,
Fetchmail is also already loaded on your system. The first thing you
want to do is to run Pine for the first time. This will get the dir in
/var/spool/mail ready to accept messages for you. It will also give Pine
a chance to get setup for running.
The next thing you will want to do is
so dyou mean i should click network infomation System
then how do I fill in NIS domain and NIS server?
I ever go to my isp 's web to configure static ip and domain, configure
Forward DNS Records
it ask me to fill in fully qualifed hostmanme
then I fill in myLoginName.qwest.net
but it
On Thu, 1 Mar 2001, Dan LaBine wrote:
I agree entirely with philomena, but 1 question?? How many 16 year olds
does this guy hang out with? This guy sounds really old, so I'm
wondering what kind of deviate he might be??
Come on now, there's no call for that.
peace,
Rog
Registered Linux user
I have recently installed Mandrake 7.2 - all went very well, including
detection of an ethernet card other distributions couldn't.
Display is quite poor. I have entered all the correct monitor
settings. Other distributions work well with my monitor and these
settings. I have experimented with
Besides, why does it have to be a 16 year old? My girlfriend is 19 and she's
tighter than a 16 year old. That's age discrimination!
Sincerely and respectfully,
Hans N.
mailto:[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Roger
Romanator wrote:
Bill Barto wrote:
I remember seeing this neat graphical display the first time I booted
7.2
but haven't seen it since. If this was Aurora and it shows as installed
on my system(in KPackage) how do I get it to run automatically at
bootup?
Log in as root. If you
I'm replying to Bill about his HP612 printer, and to the post about the
CUPS 1.1.6 conflicts. Bill,...the reason your HP printer isn't working
is because you've got "printpro" installed. Log in as root, open a
terminal, fire up kpackage, and manually remove any and all printopro
entries. Then
Too Much Information! But since we're on the subject,...what's your
girlfriend's phone number? If it starts with 1-900 don't bother posting
it to the group!!! Grin-Grin!
Hans N. wrote:
Besides, why does it have to be a 16 year old? My girlfriend is 19 and she's
tighter than a 16 year old.
K, Rog,...Peace!
Roger Sherman wrote:
On Thu, 1 Mar 2001, Dan LaBine wrote:
I agree entirely with philomena, but 1 question?? How many 16 year olds
does this guy hang out with? This guy sounds really old, so I'm
wondering what kind of deviate he might be??
Come on now, there's no
Alan; Check the post I've just sent to the group. It may help.
Alan Shoemaker wrote:
Renaud OLGIATI wrote:
HEEEPPP!!
I am trying in vain to print from SO5.2, and feel I am
slowly going mad.
I have installe the printer when I installed Mandrake 7.2;
the test-page prints, and
Ok first about your CD rom. if you are using linix Mandrake 7.2
you should have Drake config installed. At least I do but I not running
linux4Windows. Run drake config (go into) - "linix config - system
configutartion" - file systems - access local drive. From there you
should be able to mount
Why not just select Edit from the Netscape menu, then
Prefences-Navigator-Clear History. Clear the cache by
Edit-Preferences-Advanced-Cache-Clear Disk (and/or) Memory Cache?
Meph Istopheles wrote:
Any body knows...
What can I do for clean the history of Netscape?
I just do:
rm
Has anyone had problems with their 8.0 installation and seting up the
bootloader? I can't seem to get there. It always fails on me!The rest of
the install goes flawlessly, but of course I can get it to boot. I'm
running a dual-boot (Win Me and Mandrake 8.0 Beta) on my test PC, and I
haven't
all I can say at this point is - DIE, THREAD DIE... Now, where'd I put
that twit filter.
[EMAIL PROTECTED] wrote:
HEY !! I don't mind a crude joke, a little bad language perhaps but this is
just SICK ! How about a little respect for younger/female/parents on this
list ?
On Sunday 04
I have Mandrake 7.2 and RedHat
7.0When I try to install Mandrake it keeps on telling me "do you have any
scsi devices?"When I say "no" it just ignores it and keeps on telling me
"yes or no". But when I click yes it's unable to find the drivers for it.So
i'm stuck at this level of
Dan LaBine wrote:
I'm replying to Bill about his HP612 printer, and to the post about the
CUPS 1.1.6 conflicts. Bill,...the reason your HP printer isn't working
is because you've got "printpro" installed. Log in as root, open a
terminal, fire up kpackage, and manually remove any and all
On Friday 02 March 2001 00:44, you wrote:
Too Much Information! But since we're on the subject,...what's your
girlfriend's phone number? If it starts with 1-900 don't bother posting
it to the group!!! Grin-Grin!
Personally, I enjoy the sick humour. I realize that it is all intended as a
ok,
ata 100 is an ide based solution. Not SCSI
2 ata 100 can be turned off in the bios, reducing the system
to a more normal ata 33 which is supported.
I thought ata 100 was supported, but, .
steelhead.
- Original Message -
From:
Nurash
Baimbetov
To: [EMAIL
Open netconf - Host name and IP network devices - Adaptor 1. Check
"Enabled" and "Dhcp". For Net device put "eth0" and for the kernel
module put "eepro100". Accept all of these and reboot just to be sure.
Now run "/sbin/dhcpcd -d -n -h COxxx-A eth0" - you should be able
to connect to
89 matches
Mail list logo
