--- Stefano Lena [EMAIL PROTECTED] ha scritto:
Ciao e grazie a tutti coloro che condividono le loro
conoscenze.
Forse sono OT ma volevo ringraziare Stefano Salari
per la dritta (
funzionante !! ) su come settare i permessi delle
partizioni windows (
problema che mi affliggeva da un
Buongiorno a tutti,
un amico mi chiede come deve configurare il modem alcatel speedtouch usb
sotto la mandrake 8.0
io purtroppo ho la versione ethernet a casa e in ditta uso un router
non ho proprio mai configurato un modem usb sotto linux .
qualcuno di voi puo' gentilmente spiegarmi come fare
sotto la 8.0 ho tribulato e non ce l'ho fatta ( la colpa sicuramente è mia in
quanto sono un linux-analfabeta).
ma sono passato alla 8.1 ( i dischetti sono allegati anche a linux pratico
versione con dischetti 10.900 lire , e ad altre riviste ). questa mndrk 8.1.
supporta il modem alcatel
Salve ragazzi ho un probblema con gli alias, vorrei
fare in modo che venga preso in considerazione un file di testo contenente gli
alias tipo redirect.txt invece di inserirli nel file virtusertable, qualcuno sa
come si deve impostare il tutto?
Scusate la profonda ignoranza ma che differenza c'è
tra un window manager e un desktop integrato? Cioè a
cosa serve, alla fine, icewm? Ciao
X controlla solo la grafica a basso livello. se lo fai partire
da solo, ti compare uno sfondo a puntini bianchi e neri ed un xterm
nero, senza
Ciao
ti copio qui sotto la mail che mi è arrivata quando mi
sono iscritta da cui prendere le informazioni che ti
interessano
P.S.: ricordati di scrivere un Oggetto riferito
all'argomento della tua richiesta quando scrivi una
mail
Se non ti bastano le informazioni fammi/facci sapere.
Un
On Thu, 15 Nov 2001, Perfect Dark wrote:
salve,
consigli per un firewall per MDK8.1, tipo zonealarm di windows?
Ciao
Perfect Dark
Salve a tutti,
io uso il mio portatile dallo studio e cosi' e' perennemente collegato in
rete.
Per ottenere un buon livello di sicurezza ho usato ipchains.
E'
--- Silvio Segantini [EMAIL PROTECTED] ha
scritto: scusate, so di chiedere l'ovvio...
non ho più gli indirizzi per iscriversi-rimuoversi
dalla lista, ci sarebbe
qualcuno così gentile da pubblicarli?
grazie!
ockeghem
Ti rimando il tutto perchè credo proprio di aver
combinato un
Aspetta, aspetta!! Stasera ho fatto un po' di prove ed
ho capito alcune cosette interessanti!!
(Tutte le prove le ho fatte con il DevFS montato)
E me le chiami cosette interessanti?
Hai risolto il mio problema! Un eterno grazie, mio benefattore... ;-)
A parte gli scherzi, grazie davvero!!
CIao a tutti,
infine la mia installazione di gnome e' andata in porto.
Sembra non abbia i bugs della versione precedente. Unica pecca le
finestre mi appaiono senza il bordino superiore.
Qualcuno sa dove e' nascosta l'opzione giusta?
Ciao
Luigi
--
Not all who wander are lost
16:36, giovedì 15 novembre 2001, LukenShiro:
Stai usando quel maledetto devfs, vero? Purtroppo MDK 8.1 lo installa
di default, ma recentemente e' apparso un avviso in cui si segnalava
che ha dei problemi di sicurezza/malfunzionamento (riguardante proprio
i link simbolici) e si consigliava di
On Fri, 16 Nov 2001, Tommaso Leddi wrote:
16:36, giovedì 15 novembre 2001, LukenShiro:
Stai usando quel maledetto devfs, vero? Purtroppo MDK 8.1 lo installa
di default, ma recentemente e' apparso un avviso in cui si segnalava
che ha dei problemi di sicurezza/malfunzionamento (riguardante
Nell'Evo medio, all'ora 23:23, venerdì 16 novembre 2001, Voi, Notabile
Milko Ferioli avete dipinto:
Ho un piccolo problema, vorrei riuscire a montare una partizione Fat
di windows.
Ti aiuterei anche ma senza sfera di cristallo e' un po' difficile, se
dai un po' piu' di particolari la prox
On Thursday 15 November 2001 08:17 pm, you wrote:
On Thu, 15 Nov 2001 14:00:01 +0100
Renato Tognaccini [EMAIL PROTECTED] wrote:
Hi,
I moved fropm Mandrake 7.1 to 8.1 by reinstalling everything.
Everythinh worked fine except I am not able to
install soundblaster which was workinf fine
[EMAIL PROTECTED] wrote:
Hello group,
I have installed Mandrake 8.1 and I would really like the
annoying sleep mode or shutting down of my monitor to
stop.'
anyone have any great ideas??
thnxXsturm
Xsturmas root, load the /etc/X11/XF86Config-4 into an
editor and make this line
Try /usr/local - that's where mine ended up. Installed so fast
sounds suspicious though - normally a download instalation takes
ages.
As for browser wars -
Netscape has two advantages - it's an integrated mail client and
browser, and it's cross-platform (the latter being the main
reason I use
Yep i've tried pointing --with-qt-libraries to /usr/lib/qt2/ and
/usr/lib/qt2/lib
On Friday 16 November 2001 01:12, Sridhar Dhanapalan wrote:
On Thu, 15 Nov 2001 23:15:37 +
Derek Jennings [EMAIL PROTECTED] wrote:
Anyone else having trouble with configure in 8.1?
I cannot get
well, when I type mount, I get:
/dev/hda1 on / type ext2 (rw,noatime)
none on /proc type proc (rw)
devfs on /dev type devfs (rw)
none on /dev/pts type devpts (rw,mode=0620)
none on /dev/shm type tmpfs (rw)
/dev/hda6 on /home type ext2 (rw,noatime)
/proc/bus/usb on /proc/bus/usb type usbdevfs
Hi to everybody,
I moved from MDK 7.1 to MDK 8.1 by reinstalling everything.
I have a scsi computer but I also have a spcial ide device (LS120 120Mb floppy
drive) which was automatically recognized by MDK 7.1.
At boot of my new 8.1 system the device is recognized as before, since at
boot I
Hugo Ferreira wrote:
017a01c16e7f$3789bc40$[EMAIL PROTECTED]">
Ethan,
I have had the exact same problem and
have finally solved it.
Anyone please feel free to correct or
suggest a better way of doing this.
Try the following:
1. log in as root (in a KDE (or any other)
X
Hi list ,
I am having some trouble getting java applets
to work in konqueror.
I have set the path in .bashrc
export PATH=$PATH:'/opt/IBMJava2-13/jre/bin'
and also set the path in konqueror.
before i set the path in .bashrc I was getting the
error unable to find java blahblah
now I get loading
Ethan,
What is the result of a:
demsg | grep cdrom
and a
ls -la /dev/cdrom?
Don't forget the question mark.
Hugo.
- Original Message -
From:
Ethan
To: Hugo Ferreira
Cc: [EMAIL PROTECTED]
Sent: Friday, November 16, 2001 10:14
AM
Subject: Re: [newbie]
Do you have the qt2-Xt and qt2-Xt-devel packages installed as well?
On Fri, 16 Nov 2001 08:50:47 +
Derek Jennings [EMAIL PROTECTED] wrote:
Yep i've tried pointing --with-qt-libraries to /usr/lib/qt2/ and
/usr/lib/qt2/lib
On Friday 16 November 2001 01:12, Sridhar Dhanapalan wrote:
Here's the output:
[root@Echelon dev]# dmesg | grep cdrom
devfs: link of "cdrom"
devfs: link of "cdrom"
[root@Echelon dev]# dmesg | grep CDROM
[root@Echelon dev]# dmesg | grep cdrom
devfs: link of "cdrom"
devfs: link of "cdrom"
[root@Echelon dev]# ls -la /dev/cdrom?
lr-xr-xr-x 1 root root 13
No I did not... but they did not help :-(
On Friday 16 November 2001 09:54, Sridhar Dhanapalan wrote:
Do you have the qt2-Xt and qt2-Xt-devel packages installed as well?
On Fri, 16 Nov 2001 08:50:47 +
Derek Jennings [EMAIL PROTECTED] wrote:
Yep i've tried pointing
Neil
Did you try firestarter? (get it at downloads www.pclinuxonline.com)
The introductory wizard should recognise that you have a lan interface
connecting to your XP box (yuck) and an internet interface to the internet.
It should then offer to apply the firewall only on the internet
http://www.linux-tips.net/
_
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
I think the problem is the rj5 connector.
However my cards (with realtek 3591c chip) and originally they had the
autonegotiation on
i had to force the 10Mbps to let'em work
Thanx again
- Original Message -
From: David Park [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, November
tek1 wrote:
At 19:05 01/11/15 -0500, you wrote:
Questions:
1)how do I find where something installed to?
i usually try something like:
find / -name netscape
explanation: find [dir to search in] -name [name of program/file looking
for]
You can also try which,
I have tried issuing a 'service inn stop' i just got unrecognised service.
there are 2 hourly and 1 daily cron jobs setup referring to inn, how do i
get rid of them ??
Try removing files (or renaming them) in /etc/cron.daily and /etc/cron.hourly
relating to inn. For instance, there's an
Ethan,
Seems like yours is not a simple case. This
surpasses my knowledge.
It seems you have two links to two mount point of
type /dev/cdromx. where x is
a number. Do you have more than one CD-R/DVD/CD-RW
Drive? If so, the player
must know which one to use.
Hugo.
- Original
On Friday 16 November 2001 10:39 am, Jason Pearce wrote:
Hi list ,
I am having some trouble getting java applets
to work in konqueror.
I have set the path in .bashrc
export PATH=$PATH:'/opt/IBMJava2-13/jre/bin'
and also set the path in konqueror.
before i set the path in .bashrc I was
Two questions about Evolution:
First, does anyone know how to enable the tab key in Evolution? When I hit tab to indent, nothing happens. It works perfectly fine in KMail, but not at all in Evolution.
Secondly, does anyone know how to add another city to the weather area of the summary
On Fri, 2001-11-16 at 09:10, Gary Traffanstedt wrote:
Two questions about Evolution:
First, does anyone know how to enable the tab key in Evolution? When I
hit tab to indent, nothing happens. It works perfectly fine in KMail,
but not at all in Evolution.
Tab works fine for me, so I would
Subject: Re: [newbie] Setting up the Firewall to work with SAMBA
Date: Fri, 16 Nov 2001 15:51:32 +
From: Derek Jennings [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
If you edit the file /etc/rc.local (as root) and add this line at the end
sh /etc/firestarter/firewall.sh
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, 15 Nov 2001, Onur Kucuk wrote:
Hi, there!
thanks Kucuk... but
RCdOF cdrom: it was originally set to /dev/hdb and /mnt/cdrom
RCdOF I tried to emulate scsi, just as cd-rw!
RCdOF Both are detected by 'cdrecord -scanbus'
I am about to embark on my Linux journey using Mandrake 8.1 but before I
start I have a questions about partitioning my HDD. I only have a P166,
64 MB RAM and a 2.1 GB HDD. Now I understand that I should have a number
of partitions, namely:
Root
Sway (about twice my RAM therefore 128 MB)
Data
OK, here's the story, I'm doing the companys' intranet server, based on
mdk8.0 running apache. I want to be able to authenticate users based on
their NT usernames (nt4.0)
so instead of the user's logging into the intranet i want to get their NT
username automatically. (I don't want to get NT
hi all,
here i am again with my home network
3 boxes, 1 hub the 3 boxes are connected to the hub
box 1: main workstation, lm8.1, celeron 1.1ghz ip:192.168.1.2
box 2: p120, lm8.1. i run xfce on this box ip:192.168.1.4
box 3: my gateway, p120, diskless, runs linuxfw, connected to the hub
On Fri, 16 Nov 2001, Nick Andriash wrote:
I am about to embark on my Linux journey using Mandrake 8.1 but before I
start I have a questions about partitioning my HDD. I only have a P166,
64 MB RAM and a 2.1 GB HDD. Now I understand that I should have a number
of partitions, namely:
Root
is ur scsi detected during boot process?
it sould be one of the first things ihe installer looks for after keyboard
and mouse if i can remember correctly. i know mandrake 8.0 i386 had
issues with installing from a scsi cdrom. it might be one thing to
investigate in the list archives..
Can someone out there help? I'm running Mdk8.0, and have a MS Sidewinder
gamepad attached to a SB Vibra16 gameport. Sound works fine. I've
downloaded and installed the js utilities package for testing the install.
My /etc/modules.conf has this line added:
alias char-major-13 joydev ns558
if you browse the ../i586/Mandrake directory you will see a directory called
/base and in there should be a file called hdlist.cz, the relative path is
the path to the hdlist file form the RPMS directory, at a command line on
your box youb probably know that typing 'cd ..' will take you to the
i think mandrake can't do autoallocate with such small drive space. i would
almost recomend just 2 partitions with so little drive space, just cause u
can't afford a lot of free space on / ot /home..
On Friday 16 November 2001 4:54 pm, you wrote:
On Fri, 16 Nov 2001, Nick Andriash
Tell your doctor that Data reliability and cheap don't go together. He/she
will have to choose.
Mirrored drives, along with daily backups will give you some reliability. They
don't necessarily have to be hot swappable, unless downtime is not an option.
I have run both Compaq and Dell servers
Problem is if you look at his output, both /dev/cdrom0 and /dev/cdrom2 are
sym links to the same device. Something was setup wrong during install.
By any chance did you pick a security setting other than low during
install? I noticed that anything above low (medium, high) supposedly
restricts
Hello antoine rivoire,
On Friday, November 16 2001 at 09:24 AM PDT, you wrote:
i think mandrake can't do autoallocate with such small drive space. i would
almost recomend just 2 partitions with so little drive space, just cause u
can't afford a lot of free space on / ot /home..
I have
Robin Turner wrote:
As for browser wars -
Netscape has two advantages - it's an integrated mail client and
browser, and it's cross-platform (the latter being the main
reason I use it - we only have one Linux box at work, so I'm
often working from Windows). 6.2 is not perfect, but much less
You meant swap rather than root, right Nick?
Miark
- Original Message -
From: Nick Andriash [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, November 16, 2001 10:42 AM
Subject: Re: [newbie] Laying Out Partitions?
Hello antoine rivoire,
On Friday, November 16 2001 at 09:24
* ssh has a configuration option for forwarding X11.
Make sure that's not causing a problem.
* Did you set DISPLAY=192.168.1.2:0 on box 2?
* Did you host +192.168.1.4 on box 1?
Miark
hi all,
here i am again with my home network
3 boxes, 1 hub the 3 boxes are connected to the hub
That's strange that the tab works for you but not me. It works fine in everything else. As for being able to add another city, I need to add one that is not on the list. There is a close one on the list, but I'd like to add my own. Was just wondering if anyone knew how to go about this. I
On Fri, 16 Nov 2001, Nick Andriash wrote:
I am about to embark on my Linux journey using Mandrake 8.1 but before I
start I have a questions about partitioning my HDD. I only have a P166,
64 MB RAM and a 2.1 GB HDD. Now I understand that I should have a number
of partitions, namely:
Root
On Fri, 16 Nov 2001, Nick Andriash wrote:
Hello antoine rivoire,
On Friday, November 16 2001 at 09:24 AM PDT, you wrote:
i think mandrake can't do autoallocate with such small drive space. i would
almost recomend just 2 partitions with so little drive space, just cause u
can't afford a
Hello Miark,
On Friday, November 16 2001 at 09:47 AM PDT, you wrote:
You meant swap rather than root, right Nick?
Yes, sorry... I meant my Swap to be 2x my RAM so I would go for a Swap
partition of about 130 MB or so. Is Root where the actual OS is
installed... The System Files, etc.? Skidley
Hi, Gary, like most programs that automatically find the weather for
your area, there are only a handful, maybe 7-15 cities per state or
country on average. As far as I know there is no way to add your
particular city. As far as evolution is concerned, which version of Evo
are you running and
On Fri, 16 Nov 2001, Nick Andriash wrote:
Hello Miark,
On Friday, November 16 2001 at 09:47 AM PDT, you wrote:
You meant swap rather than root, right Nick?
Yes, sorry... I meant my Swap to be 2x my RAM so I would go for a Swap
partition of about 130 MB or so. Is Root where the actual OS
Hi,
Somehow my network printers compress the page and print only on the top half
of the sheet. This occasionally chops the first couple of lines of text. This
error occurs in Wordperfect, StarOffice and all KDE apps while printing.
Ideas?
Regards,
Bill W.
Want to buy your Pack or
Over the last few days I've been in a similar position, I needed to put together
specifications on a new NetWare server for a very cost-conscious customer, so I
learned quite a bit about ATA RAID and tape drives in a short amount of time.
(Unfortunately I found that alghough ATA RAID is
Paul Rodríguez wrote:
Hi, Gary, like most programs that automatically find the weather for
your area, there are only a handful, maybe 7-15 cities per state or
country on average. As far as I know there is no way to add your
particular city. As far as evolution is concerned, which version
Yes, sorry... I meant my Swap to be 2x my RAM so I would go for a Swap
partition of about 130 MB or so.
That's fine.
Is Root where the actual OS is
installed... The System Files, etc.?
No, there are only directories in the root directory, and /root is
basically the home directory of the
I'm running the .99 RC1 release. Installed it via RPM from Cooker off of RPMFind.net. The tab key seems to be disabled somehow or that the tab amount or something is not setup. One thing I should point out is that I'm using it in KDE. I wonder if that has something to do with it. I have
For the purpose of a server machine, is REISER FS better than EXT2? Or are
there others that might be better? I'm using LM8.0 PowerPack, and HAVE 8.1
PowerPack (haven't installed it yet since I keep hearing the horror
stories).
---
On Thu, 15 Nov 2001 11:34, Tom Brinkman wrote:
[snip]
| http://www.xs4all.nl/~hanb/software/unclutter-0.8-1mdk.src.rpm
|
| I did a rpm --rebuild on it and installed the rpm it wrote. Then
| I used a text editor (your choice ;) to create a file I named
| 'unclutter-start' (again, name is
A different topic on Evolution, what format is the address book in? can I import
address book from (say) Netscape 4.77 or OE5?
Thanks
Gordon
Gordon, You can import mail and contacts from Netscape using Evolution's import
feature.
To import Outlook and Outlook express mail and
What exactly differentiates server grade hardware and desktop grade?
I ask this because checking out some Dell servers (just above the price
range for this project, but wrangleable) they seem to be pretty much the
same hardware I would find in a desktop computer. IDE drives for
example, and not
On Friday 16 November 2001 5:54 pm, you wrote:
* ssh has a configuration option for forwarding X11.
Make sure that's not causing a problem.
* Did you set DISPLAY=192.168.1.2:0 on box 2?
* Did you host +192.168.1.4 on box 1?
miark,
i haven't done any of that. could you give me a bit more
On Friday 16 November 2001 5:24 pm, you wrote:
i think mandrake can't do autoallocate with such small drive space. i would
almost recomend just 2 partitions with so little drive space, just cause u
can't afford a lot of free space on / ot /home..
by two partition i meant swap and /. i
I'm sure there are many opinions about this, and what Dell calls a 'server' and
what I think of as server components may not be the same, AND there are
esoteric hardware distinctions that I do not know. Servers are optimized for
speed and fault-tolerance. This means considering the type of
So I realize that I'm going to have to give up and learn the command line
stuff :(
Does each distro have a different set of commands?
What book or website would you recommend? Keep in mind I do know DOS.
Thank you, Grant
On November 16, 2001 05:34 am, you wrote:
http://www.linux-tips.net/
On Friday 16 November 2001 02:56 pm, skinky wrote:
On Thu, 15 Nov 2001 11:34, Tom Brinkman wrote:
[snip]
| http://www.xs4all.nl/~hanb/software/unclutter-0.8-1mdk.src.rpm
|
| I did a rpm --rebuild on it and installed the rpm it wrote.
I downloaded the above source rpm but can't
I'm running great over 1 Gbit over Copper Switched LAN to
Linksys Router to Toshiba analog Cable modem on
Cox Cable Internet with LM8.1. LM8.1 recognized a linksys
Gig over Cu NIC and installed the drivers automagically.
It automagically recognized the router DHCP over the
Lan and installed the
I need to have a configured kernel source in /usr/src/linux/ before I
can install my winmodem's drivers. (So says section 5 of the howto at
http://www.medres.ch/~jstifter/linux/pctel.html). LM 8.1 CD2 appears to
have just what I need:
\Mandake\PRMS2\kernel-source-2.4.8-26mdk.i586.rpm, which
Basicly all Linux's will have 99.99% the same commands. Now going to
something like HP's Unix you will find that the commandline options are
different sometimes. I use HP Unix at work.
As for a website with the commands, I don't know off the top of my head. If
I find anything in the next
On Sat, 17 Nov 2001 11:14, Tom Brinkman wrote:
|
| ~ $ wprv `which xmkmf`
| XFree86-devel-4.1.0-17mdk
|
| 'wprv' is an alias of mine for rpm -qa --whatprovides, but shows
| that you need XFree86-devel installed. Without diggin way into it,
| I don't know if a 4.1 version will do. So
Does any one know what the long term plan is for Netscape 4.series,
6.series and mozilla. Will Netscape 6.series replace the 4.series on
Mndrake some day?
Nev
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Sat, 17 Nov 2001 13:14:21 +1100
Neville Cobb [EMAIL PROTECTED] wrote:
Does any one know what the long term plan is for Netscape 4.series,
6.series and mozilla. Will Netscape 6.series replace the 4.series on
Mndrake some day?
Nev
Most web pages are still designed with only IE and
On Friday 16 November 2001 20:14, you wrote:
Jon Dowd [EMAIL PROTECTED]
sent Friday, November 16, 2001 6:04 PM
:Iomega has a site listing lots of BIOS entry key commands.
Yes, it does. And the Dell site has the correct answer.
http://support.dell.com/us/en/kb/document.asp?DN=1012573
I downloaded the mandrake 8.1 ISO from one of your
FTP sites. I used winimage to open the ISO and extract the contents to a empty
folder. I need burned all of the contents to a CD. When I try to boot from the
CD it tells me "searching for boot record" : None found
I can't seem to get this
You need to burn the .iso image, not the individual files. If you do so,
you will have problems.
Michael
--
Michael Viron
Registered Linux User #81978
Senior Systems Administration Consultant
Web Spinners, University of West Florida
At 07:55 PM 11/16/2001 -0800, you wrote:
I downloaded the
DEar Linux friends,
I am having trouble in loading MKL8.1 on my Adaptec SCSI controller. The
machine simply hangs!Have any idea how to proceed?
--
S.Ganesan
Principal Scientist
Central Institute of Agricultural Engineering
Berasia Road
Bhopal 462038, INDIA
Phone: 0755-730986 (O)
Hi,
I'm new here and hoping someone will have an idea about how to fix my problem.
I have a Soundblaster live 5.1 sound card that I can't get a music CD player
to work with. When running Grip it recognizes the music CD and plays it, but
no sound can be heard. The internal system wave sounds
i too am looking for a visio substitute on linux, but just doesn't seem
like the s/w is there yet. kivio looks to be the closest, but they said
that importing visio files is low on their priority list of things to do... :(
pls let us know if u find something though. i will do the same...
One: Is it standard for mandrake 8.1not to come with
gimp? Is it perhaps that I do not have a full set of
libraries?
Out of curiosity (my partner is a complete mac freak
-ok so I haven't looked at osX as of YET)-
Can you run linux on (I should stress) older mac
architecture?
Gina
It's quite easy, really.
1) On box 1 open X connections from box 2 by typing
xhost +192.168.1.4
2) On box 1, ssh to box 2.
3) On box 2 via your ssh connection, type
DISPLAY=192.168.1.2:0
4) When you start X on box 2 via the ssh connection,
it should pop up on box 1.
Miark
-
Can anyone help me with NFS? I understand that NFS shares are created using
/etc/export, but what do I put in there?
Control Center then allows me to do NFS mounts - prompts for Server and
shared resource. I presume that server is just the host name associated with
an IP address and shared
I have never heard sound in Mdk 8.1.
Linuxconf and SomethingDrake both recognize the card for what it
is (Crystal something). I have the box checked for sounds at
startup or whatever (in a different OS now).
When I type esd at a command line, the output states:
esd: Failed to fix mode of
Gina,
Gimp is there but you might have to run the software manager to install it if
it didn't install initially.
Linux ppc should work in any PPC mac, but not in 68k.
Roy
On Saturday 17 November 2001 00:10, you wrote:
One: Is it standard for mandrake 8.1not to come with
gimp? Is it
Retracing my steps, that was a 3com
100mbps NIC that automagically installed
and not the Linksys Gigabit. Sorry.
I hope I didn't mess anyone up.:(
It is still faster!
The cable internet seems to come up automagically
on LM7.2,8.0,8.1 if the NIC comes up.I have not
tried it without the router in
FYI -
11K8410 WebSphere Homepage Builder V4.0 for Linux
Electronic Delivery $57.00
11K8409 WebSphere Homepage Builder V4.0 for Linux
Boxed software $66.00
11K8414 WebSphere Homepage Builder V4.0 for Linux
User's Guide $5.00
At 04:50 PM Thursday, 11/15/2001, Miark wrote -=
IBM's Home Page
89 matches
Mail list logo