Dennis Myers wrote:
On Saturday 09 April 2005 05:14 am, Paul Smith wrote:
On Apr 9, 2005 5:02 AM, Dennis Myers [EMAIL PROTECTED] wrote:
I do not know why, but now I cannot use my flash drive, getting the
following error:
Could not mount device.
The reported error was:
mount: only root can
JR wrote:
On Saturday 09 April 2005 03:09 pm, JR wrote:
On Saturday 09 April 2005 12:21 am, Mikkel L. Ellertson wrote:
JR wrote:
I put mandrake10.1-Official on my friends desktop. His mouse doesnt
work. It doesn't show up in harddrake (the gui tool). In fact, there is
no mouse
them all at one time ?
And even better ~ if there was a way to check everything rm wanted
to remove first without having to say Y to every file one by one ?
Still, this is only a thought and not essential but if you know then
please share.
TIA
--
Newbie Seeking USER_FUNCTIONALITY always
I have a Toshiba Tecra 8000 with a 400MHz processor, 192MB
RAM, and DVD drive. From within XFCE (i.e. a lightweight enviro)
I tried to play a DVD last night with mplayer, and totem, but
nothing seems to work. Is 400 MHz just too little power?
Miark
.
--
Newbie Seeking USER_FUNCTIONALITY always!
Regards
SnapafunFrank
Big or small, a challenge requires the same commitment to resolve.
Registered Linux User # 324213
Want to buy your Pack or Services from MandrakeSoft?
Go to http
On Sat, 09 Apr 2005 16:24:17 -0500, Mikkel wrote:
On my system, a stock 10.1, with the standard upgrades, but
not with KDE upgraded to a newer version, plugging in a flash
drive results in it being mounted on /mnt/removable, and I am
able to access it without problem. But people that have
On Sat, 9 Apr 2005 18:34:33 -0400
Miark disseminated the following:
I have a Toshiba Tecra 8000 with a 400MHz processor, 192MB
RAM, and DVD drive. From within XFCE (i.e. a lightweight enviro)
I tried to play a DVD last night with mplayer, and totem, but
nothing seems to work. Is 400 MHz just
Stephen Kühn wrote:
On Wed, 2005-04-06 at 12:30, mike wrote:
Ahh... thanks Steven.
Never happened to me before at least since I been using Linux.
I guess I thought I was safer than I really was.
Not sure how to turn that off in mozilla will look around.
Again thanks,
Mike
Not quite
On Saturday 09 April 2005 06:29 pm, SnapafunFrank wrote:
Hi ~ the following is in reference to Acrobat Reader only.
I have been reading about Acrobat5 and Acrobat7 and am looking at
installing the later.
I understand that I need to remove all of Acrobat5 and that is OK by me.
The README
Paul Kaplan wrote:
On Saturday 09 April 2005 06:29 pm, SnapafunFrank wrote:
Hi ~ the following is in reference to Acrobat Reader only.
I have been reading about Acrobat5 and Acrobat7 and am looking at
installing the later.
I understand that I need to remove all of Acrobat5 and that is OK by me.
JR wrote:
On Saturday 09 April 2005 12:21 am, Mikkel L. Ellertson wrote:
JR wrote:
I put mandrake10.1-Official on my friends desktop. His mouse doesnt work.
It doesn't show up in harddrake (the gui tool). In fact, there is no
mouse section at all, and it's not under peripherals.
His mouse is a
Sorry this is a little off topic, I have a friend that wants to add some
video to a website he has and wants me to help - but I've never done
this before. So far I have been using Mozilla to edit his site and I've
got no html knowledge at all. Is there someone who can point me in the
right
Rosemary McGillicuddy wrote:
I've just installed frozen bubble to have a play but can't actually get it to
do anything. Used urpmi frozen-bubble and install seemed okay, get the
frozen bubble display up but cursor disappears when I try to hover over any
of the buttons. I can see it in the
On Apr 8, 2005 4:12 AM, Mikkel L. Ellertson [EMAIL PROTECTED] wrote:
This has me stumped. If you did not try to mount the drive as a user,
then you should not have gotten the error message. The standard hotplug
settings will mount a flash drive on /mnt/removable unless it things the
drive is
On Apr 8, 2005 10:12 AM, Paul Smith [EMAIL PROTECTED] wrote:
This has me stumped. If you did not try to mount the drive as a user,
then you should not have gotten the error message. The standard hotplug
settings will mount a flash drive on /mnt/removable unless it things the
drive is
Dear All
I am trying to use the Acrobat Plugin with Mozilla. However, I get the
following error message, in spite of having Acrobat Reader 7.0
installed:
Could not launch Adobe Reader 7.0. Please make sure it exists in PATH
variable in the environment.
If the problem persists, please reinstall
On Friday 08 April 2005 04:42 am, Aidan Holmes wrote:
Sorry this is a little off topic, I have a friend that wants to add some
video to a website he has and wants me to help - but I've never done
this before. So far I have been using Mozilla to edit his site and I've
got no html knowledge at
On Friday 08 April 2005 11:54, Paul Smith wrote:
Dear All
I am trying to use the Acrobat Plugin with Mozilla. However, I
get the following error message, in spite of having Acrobat
Reader 7.0 installed:
Could not launch Adobe Reader 7.0. Please make sure it exists in
PATH variable in the
On Apr 8, 2005 11:27 AM, Kaj Haulrich [EMAIL PROTECTED] wrote:
I am trying to use the Acrobat Plugin with Mozilla. However, I
get the following error message, in spite of having Acrobat
Reader 7.0 installed:
Could not launch Adobe Reader 7.0. Please make sure it exists in
PATH variable
HI Paul,
Could the AR 7.0 itself be launched? If not you might need to reinstall it. Or
I guess you didn't import it into your PATH. What will a which acroread in
command line say? I remember I made a symbloic link ../AR7.0/bin/acroread
to /usr/bin/acroread to insure it's in my PATH.
Or
On Apr 8, 2005 12:18 PM, Q.H. Wang [EMAIL PROTECTED] wrote:
Could the AR 7.0 itself be launched? If not you might need to reinstall it. Or
I guess you didn't import it into your PATH. What will a which acroread in
command line say? I remember I made a symbloic link ../AR7.0/bin/acroread
to
Hi Paul,
Are you sure that the nppdf.so in your $mozilla/plugins is the 7.0 one. I
didn't use the script to install the plugin, instead I manually did that.
I am not sure what's your problem because I installed the AR 7 through RPM,
but after the installation when I opened some pdf files
Hi Paul,
There are some posts discussing exactly your problem at
http://www.linuxforum.com/forums/index.php?showtopic=136543st=15#entry596612,
But I don't know whether that's gonna solve your problem.
Bests,
Q.H.
Want to buy your Pack or
Hi Folks,
I have tried to use ark to extract a rar file but failed. It reported
something like the file compressed using x-rar-compress and then failed. At
that moment I used the ark along the Mandrake 10 KDE3.2. I remember its
version is 2.4.x or so. Then I downloaded an ark-3.4-x RPM from
Op Fri, 8 Apr 2005 20:06:25 +0100 schreef Q.H. Wang:
Or is there some other good tool for
rar? Many thanks for any help.
http://www.rarlab.com/rar/rarlinux-3.5.b1.tar.gz
:-)
--
A weapon? Isn't that an extension of your fear?
- Loesje
http://www.nlpagan.net/linux.php
Have you visited
On Fri, 8 Apr 2005 21:26:53 +0200, Paul wrote:
Op Fri, 8 Apr 2005 20:06:25 +0100 schreef Q.H. Wang:
Or is there some other good tool for rar?
http://www.rarlab.com/rar/rarlinux-3.5.b1.tar.gz
Even easier: urpmi unrar
Miark
Want to buy
On Fri, 8 Apr 2005 20:06:25 +0100, Q.H. wrote:
I have tried to use ark to extract a rar file but failed. It
reported something like the file compressed using x-rar-
compress and then failed.
Ark will complain because it doesn't think x-rar-compress = rar
but if you specify rar in the dialog,
On Apr 8, 2005 5:06 PM, Q.H. Wang [EMAIL PROTECTED] wrote:
There are some posts discussing exactly your problem at
http://www.linuxforum.com/forums/index.php?showtopic=136543st=15#entry596612,
But I don't know whether that's gonna solve your problem.
Thanks, Q.H.. It did not help,
I put mandrake10.1-Official on my friends desktop. His mouse doesnt work. It
doesn't show up in harddrake (the gui tool). In fact, there is no mouse
section at all, and it's not under peripherals.
His mouse is a PS/2 mouse, but it is connected to a COM port via an adaptor.
Can anyone tell me
Many thanks gangs.
I've just installed unrar, it's working perfectly. Thanks again.
Bests,
Q.H.
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
Oooops, man, you got a very hard bone to tackle.
Good luck.
Q.H.
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
Aron Smith wrote:
On Wednesday 06 April 2005 01:10 pm, Philippe Landau wrote:
Miark wrote:
Try connecting the USB cable _before_ you plug in the external
drive's power supply.
thanks a lot for all the expertly advice, Joe, Mikkel, Miark and jdow.
it looks like the external case is leaking power to
On Thursday 07 April 2005 02:35 pm, Anne Wilson wrote:
I have a small amount of web space, and need to separate a part of it. A
subdirectory call Design will be under the index page. I want to make it
appear the root, but I can't remember how it's done. Nor can I find
anything in either of
hello
i like PCLinux, i like Sam, i like PLF (not a distro)
but i have very little experience with them.
and most of all, i like the Mandrake mailinglists:
there are warm-hearted people here,
which is rare on technical mailinglists.
Ubuntu for example advertises humanity onto others
while
JR wrote:
I put mandrake10.1-Official on my friends desktop. His mouse doesnt work. It
doesn't show up in harddrake (the gui tool). In fact, there is no mouse
section at all, and it's not under peripherals.
His mouse is a PS/2 mouse, but it is connected to a COM port via an adaptor.
Can anyone
On Fri, 8 Apr 2005 23:23:26 +0100, Q.H. wrote:
Oooops, man, you got a very hard bone to tackle.
Good luck.
Him and I both. I've tried copying the file manually and using
the install script, and although Firefox tries to open Reader, it
gives me that same PATH complaint.
Miark
On Friday 08 April 2005 03:53 pm, Philippe Landau wrote:
hello
i like PCLinux, i like Sam, i like PLF (not a distro)
but i have very little experience with them.
and most of all, i like the Mandrake mailinglists:
there are warm-hearted people here,
which is rare on technical mailinglists.
On Apr 9, 2005 12:26 AM, Miark [EMAIL PROTECTED] wrote:
Oooops, man, you got a very hard bone to tackle.
Good luck.
Him and I both. I've tried copying the file manually and using
the install script, and although Firefox tries to open Reader, it
gives me that same PATH complaint.
Are you
On Saturday 09 April 2005 01:38, Aron Smith wrote:
On Friday 08 April 2005 03:53 pm, Philippe Landau wrote:
hello
i like PCLinux, i like Sam, i like PLF (not a distro)
but i have very little experience with them.
and most of all, i like the Mandrake mailinglists:
there are
On Friday 08 Apr 2005 20:59, Aidan Holmes wrote:
Rosemary McGillicuddy wrote:
I've just installed frozen bubble to have a play but can't actually get it
to do anything. Used urpmi frozen-bubble and install seemed okay, get
the frozen bubble display up but cursor disappears when I try to
the people here are very warm-hearted and helpful. I've experienced some
rather nasty comments as a newbie on other lists.
Ubuntu for example advertises humanity onto others
while encouraging a gang mentality on their mailing lists.
dissent and open discourse is not welcome
Q.H. Wang wrote:
Many thanks gangs.
I've just installed unrar, it's working perfectly. Thanks again.
Bests,
Q.H.
Now 'urpmi parchive2' and you'll be able to use it (par2) to
repair corrupted or missing .par's if you also have the par2
files for the archive.
Another hint:
You know, this should be simple. Nearly everybody does it, right?
;)
Yet I am having trouble with mkisofs getting it to replicate a directory
sstructure so that I can just continually go from one directory to the
other (it is an audio book set of mp3s) without having to jump all over
the
On Apr 9, 2005 3:03 AM, Chris [EMAIL PROTECTED] wrote:
I am trying to use the Acrobat Plugin with Mozilla. However, I get the
following error message, in spite of having Acrobat Reader 7.0
installed:
Could not launch Adobe Reader 7.0. Please make sure it exists in PATH
variable in the
On Sat, 9 Apr 2005 00:37:14 +0100, Paul wrote:
On Apr 9, 2005 12:26 AM, Miark [EMAIL PROTECTED]
wrote:
Oooops, man, you got a very hard bone to tackle.
Good luck.
Him and I both. I've tried copying the file manually and
using the install script, and although Firefox tries to open
On Friday 08 April 2005 09:20 pm, Paul Smith wrote:
/usr/lib/mozilla/plugins/nppdf.so
/usr/lib/mozilla-1.7.5/plugins/nppdf.so
/home/chris/.mozilla/plugins/nppdf.so
/root/.mozilla/plugins/nppdf.so
It automatically installed in ~/.mozilla/plugins/ when I used the (2)
option when I ran
On Thursday 07 April 2005 04:13 pm, Paul Smith wrote:
Dear All
I do not know why, but now I cannot use my flash drive, getting the
following error:
Could not mount device.
The reported error was:
mount: only root can mount /dev/sda1 on /media/usbdisk
Any ideas?
Thanks in advance,
On Friday 08 April 2005 09:52 pm, Dennis Myers wrote:
On Thursday 07 April 2005 04:13 pm, Paul Smith wrote:
Dear All
I do not know why, but now I cannot use my flash drive, getting the
following error:
Could not mount device.
The reported error was:
mount: only root can mount
On Tue, 5 Apr 2005 15:51:13 -0700
Russ Kepler [EMAIL PROTECTED] wrote:
I solved the same problem by adding psmouse.proto=bare to the append in the
lilo.conf. After remember to 'lilo' to reset the boot things worked with the
KVM.
Well, that works, except that then the wheel doesn't scroll.
Les Thomas wrote:
I have mandrake 10.1 , some how the control centre has dissapeared , I
must have done something to either hide it or delte it .
I think it must be deactivated but dont know where to look or how to
get it back up
Les
Which control centre is missing? Mandrake control centre,
On Tue, 5 Apr 2005 15:51:13 -0700
Russ Kepler [EMAIL PROTECTED] wrote:
I solved the same problem by adding psmouse.proto=bare to the append in the
lilo.conf. After remember to 'lilo' to reset the boot things worked with the
KVM.
Pardon the shout, but fixes excite me. (I lead a boring
I've just installed frozen bubble to have a play but can't actually get it to
do anything. Used urpmi frozen-bubble and install seemed okay, get the
frozen bubble display up but cursor disappears when I try to hover over any
of the buttons. I can see it in the blue area above and use it the
On Thursday 07 April 2005 10:38, Rosemary McGillicuddy wrote:
I've just installed frozen bubble to have a play but can't actually get it
to do anything. Used urpmi frozen-bubble and install seemed okay, get the
frozen bubble display up but cursor disappears when I try to hover over any
of the
On Thursday 07 Apr 2005 10:38, Rosemary McGillicuddy wrote:
I've just installed frozen bubble to have a play but can't actually get it
to do anything. Used urpmi frozen-bubble and install seemed okay, get the
frozen bubble display up but cursor disappears when I try to hover over any
of the
My idiot sheet says:
make clean bzImage modules to build the kernel
make modules_install install to install the kernel.
Hopefully this this put the new kernel in your bootloader, and set it to the
default next time you boot. I have had occasional trouble with the default
bit. Hopefully it
Hi Folks,
Recently I got a problem that I could frequently receive emails, which, I
guess, are supposedly sent to my colleague. Although most of those emails are
spam mails, I believe, it's kinda annoying. Because I don't know whether this
problem comes from? Could anyone tell something by
On Thursday 07 April 2005 07:52, Q.H. Wang wrote:
Hi Folks,
Recently I got a problem that I could frequently receive emails, which, I
guess, are supposedly sent to my colleague. Although most of those emails
are spam mails, I believe, it's kinda annoying. Because I don't know
whether this
Where do i find the samba wisard that is shown on the screenshots on
mandrakelinux.com?
http://www.mandrakelinux.com/en/10.1/features/8.php3
i can't seem to find it.
Regards Isak
Want to buy your Pack or Services from MandrakeSoft?
Go to
Many thanks for both of your answering. I'm gonna got it cracked soon.
Bests,
Q.H.
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
On Apr 7, 2005 8:54 AM, Isak Lyberth [EMAIL PROTECTED] wrote:
Where do i find the samba wisard that is shown on the screenshots on
mandrakelinux.com?
http://www.mandrakelinux.com/en/10.1/features/8.php3
i can't seem to find it.
Regards Isak
On Wed, 6 Apr 2005 22:33:40 -0400, Ivo wrote:
I think Mandriva is awful...
Me too. But it's official now:
http://www.mandriva.com/company/press/pr?n=/pr/corporate/2551
Miark
Want to buy your Pack or Services from MandrakeSoft?
Go to
On Thu, 7 Apr 2005 10:51:11 -0400, Miark wrote:
On Wed, 6 Apr 2005 22:33:40 -0400, Ivo wrote:
I think Mandriva is awful...
Me too. But it's official now:
http://www.mandriva.com/company/press/pr?n=/pr/corporate/2551
Here's one tidbit that makes the change a bit more palatable:
The
On Thursday 07 Apr 2005 22:13, Peter Watson wrote:
On Thursday 07 Apr 2005 10:38, Rosemary McGillicuddy wrote:
I've just installed frozen bubble to have a play but can't actually get
it to do anything. Used urpmi frozen-bubble and install seemed okay, get
the frozen bubble display up but
On Thursday 07 Apr 2005 21:45, Derek Jennings wrote:
On Thursday 07 April 2005 10:38, Rosemary McGillicuddy wrote:
I've just installed frozen bubble to have a play but can't actually get
it to do anything. Used urpmi frozen-bubble and install seemed okay, get
the frozen bubble display up
hi, i am using a winmodem on my computer for windows, is that possible to
use that same modem for linux, mandrake community edition v.10 ?... i did
some reseaches about win modems and linux and what i read in all this
websites is that it is not possible!!!
but i found a driver for LTwinmodem
On Thursday 07 Apr 2005 17:55, Domingo Abrego wrote:
hi, i am using a winmodem on my computer for windows, is that possible to
use that same modem for linux, mandrake community edition v.10 ?... i did
some reseaches about win modems and linux and what i read in all this
websites is that it
On Thursday 07 April 2005 05:55 pm, Domingo Abrego wrote:
hi, i am using a winmodem on my computer for windows, is that possible to
use that same modem for linux, mandrake community edition v.10 ?... i did
some reseaches about win modems and linux and what i read in all this
websites is
On Thursday 07 April 2005 07:51 am, Miark wrote:
Agreed its horrible corrupted to Mandrivel too easy Marketing wise this is a
bad move
On Wed, 6 Apr 2005 22:33:40 -0400, Ivo wrote:
I think Mandriva is awful...
Me too. But it's official now:
On Thursday 07 April 2005 02:38 am, Rosemary McGillicuddy wrote:
I've just installed frozen bubble to have a play but can't actually get it
to do anything. Used urpmi frozen-bubble and install seemed okay, get the
frozen bubble display up but cursor disappears when I try to hover over any
of
Aron Smith wrote:
On Thursday 07 April 2005 07:51 am, Miark wrote:
On Wed, 6 Apr 2005 22:33:40 -0400, Ivo wrote:
I think Mandriva is awful...
Me too. But it's official now:
http://www.mandriva.com/company/press/pr?n=/pr/corporate/2551
Miark
Agreed its horrible corrupted to Mandrivel too easy
On Thu, 07 Apr 2005 19:49, Margot wrote:
Les Thomas wrote:
I have mandrake 10.1 , some how the control centre has dissapeared , I
must have done something to either hide it or delte it .
I think it must be deactivated but dont know where to look or how to
get it back up
Les
Which
I am using mandrake 10.1 and need to prepare a floppy for lilo. I found
instructions and they say to use fdformat /dev/fd0H1440, however this
gives me a error of No such file or directory. I have also tried
fdformat /dev/fd0 and that gives me No such device or address.
Any help would be
I have a small amount of web space, and need to separate a part of it. A
subdirectory call Design will be under the index page. I want to make it
appear the root, but I can't remember how it's done. Nor can I find anything
in either of the books I have. Can anyone either point me at
the
appropriate driver here:
http://www.heby.de/ltmodem
More good instructions for newbie here:
http://users.ox.ac.uk/~mert1313/ltmodem.html
I have tried the SV92P (listed as incompatible) and it
does, in fact, not work.
Good luck
Brett
--- Domingo Abrego [EMAIL PROTECTED] wrote:
hi, i am using
Well, did they finally put the new KDE in there
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
Leroy Britton wrote:
I am using mandrake 10.1 and need to prepare a floppy for lilo. I found
instructions and they say to use fdformat /dev/fd0H1440, however this
gives me a error of No such file or directory. I have also tried
fdformat /dev/fd0 and that gives me No such device or address.
On Thursday 07 April 2005 06:33 pm, Leroy Britton wrote:
I have also tried
fdformat /dev/fd0 and that gives me No such device or address.
___
~ maybe, stick in a floppy
then, as root, command :-
mkfs.minix /dev/fd0
or
mkfs.ext2 /dev/fd0
best rgds
LES wrote:
On Thu, 07 Apr 2005 19:49, Margot wrote:
Les Thomas wrote:
I have mandrake 10.1 , some how the control centre has dissapeared , I
must have done something to either hide it or delte it .
I think it must be deactivated but dont know where to look or how to
get it back up
Les
Which
Dear All
I do not know why, but now I cannot use my flash drive, getting the
following error:
Could not mount device.
The reported error was:
mount: only root can mount /dev/sda1 on /media/usbdisk
Any ideas?
Thanks in advance,
Paul
Want to
I have done what others before have done: mucked about in file
associations and screwed something up. Brian McKee apparently did
the same thing in January:
When I try to open KDE apps, I get an error message:
Could not find mime type application/octet-stream.
I followed Brian's thread, made a
Hello all,
Please forgive this basic question, I couldn't find the minimum
requirements for MD 10.1 anywhere. the worst part is I'm actually
running 10.1 on this pc.
Also,
Where can i find earlier versions of Mandrake Linux suitable to work on
a Pentium 233 with 80 MB ram.
Its for my mother,
Il gio, 2005-04-07 alle 23:42, Cameron MacDonald ha scritto:
I have done what others before have done: mucked about in file
associations and screwed something up. Brian McKee apparently did
the same thing in January:
When I try to open KDE apps, I get an error message:
Could not find mime
On Thursday 07 April 2005 23:14, Tim wrote:
Hello all,
Please forgive this basic question, I couldn't find the minimum
requirements for MD 10.1 anywhere. the worst part is I'm actually
running 10.1 on this pc.
Also,
Where can i find earlier versions of Mandrake Linux suitable to work on
- Original Message -
From: Tim [EMAIL PROTECTED]
To: newbie@linux-mandrake.com
Sent: Friday, April 08, 2005 10:14 AM
Subject: [newbie] min spec's for 10.1
Hello all,
Please forgive this basic question, I couldn't find the minimum
requirements for MD 10.1 anywhere. the worst part
frengoGorgia wrote:
Il gio, 2005-04-07 alle 23:42, Cameron MacDonald ha scritto:
I have done what others before have done: mucked about in file
associations and screwed something up. Brian McKee apparently did
the same thing in January:
When I try to open KDE apps, I get an error message:
Could
Aron Smith wrote:
On Thursday 07 April 2005 07:51 am, Miark wrote:
Agreed its horrible corrupted to Mandrivel too easy Marketing wise this is a
bad move
Well, maybe there is a method in this madness. Anyone knew anything
about thouse trademark lawsuit with
Hearst Corporation?
Rafa
Il ven, 2005-04-08 alle 00:58, Cameron MacDonald ha scritto:
Off-topic: Are you a cyclist?? No, I don't think everyone in Italy
rides a bicycle, but Just thought I'd check. I ride a Fondriest.
I'm not a cyclist, i only ride bicycle in my spare time , and for
little travel too .
On Friday 08 April 2005 01:14, Rafa Kamraj wrote:
Aron Smith wrote:
On Thursday 07 April 2005 07:51 am, Miark wrote:
Agreed its horrible corrupted to Mandrivel too easy Marketing wise this
is a bad move
Well, maybe there is a method in this madness. Anyone knew anything
about thouse
On Thursday 07 April 2005 09:55 am, Domingo Abrego wrote:
| hi, i am using a winmodem on my computer for windows, is that possible to
| use that same modem for linux, mandrake community edition v.10 ?... i did
| some reseaches about win modems and linux and what i read in all this
| websites is
Paul Smith wrote:
On Apr 7, 2005 11:59 PM, Mikkel L. Ellertson [EMAIL PROTECTED] wrote:
Thanks, Mikkel.
Dumb question time - did the flash drive get mounted automaticly on
/mnt/removable? This is what usualy happens when you plug one in. If you
plug in a second one, it gets mounted on
On Thursday 07 April 2005 03:14 pm, Tim wrote:
| Hello all,
|
|
| Please forgive this basic question, I couldn't find the minimum
| requirements for MD 10.1 anywhere. the worst part is I'm actually
| running 10.1 on this pc.
|
| Also,
|
| Where can i find earlier versions of Mandrake Linux
On Thursday 07 April 2005 15:14, Tim wrote:
Where can i find earlier versions of Mandrake Linux suitable to work on
a Pentium 233 with 80 MB ram.
Why not use Gentoo, where each package is compiled on the fly for the
processor in question?
I have a Pentium 266 laptop with 144mb, that runs
Rob Blomquist wrote:
On Thursday 07 April 2005 15:14, Tim wrote:
Where can i find earlier versions of Mandrake Linux suitable to work on
a Pentium 233 with 80 MB ram.
Why not use Gentoo, where each package is compiled on the fly for the
processor in question?
I have a Pentium 266 laptop with
On Thursday 07 April 2005 11:12 pm, Mikkel L. Ellertson wrote:
# This file is edited by fstab-sync - see 'man fstab-sync' for details
If you have this in your /etc/fstab, you can't be running 10.1 , since this is
provided by hal and that is a feature in 10.2, and is non-existent in 10.1.
Are
On Friday 08 April 2005 12:25 am, Rob Blomquist wrote:
On Thursday 07 April 2005 15:14, Tim wrote:
Where can i find earlier versions of Mandrake Linux suitable to work on
a Pentium 233 with 80 MB ram.
Why not use Gentoo, where each package is compiled on the fly for the
processor in
On Wed, 2005-04-06 at 15:49, WauloK wrote:
Yes! Definitely! Thanks :)
Now you can get back into IRC and tell'em how great having TWO resources
for Mandrake issues is, eh?
(g)
YankDownUnder
--
stephen kuhn
mobile: 0410-728-389
illawarra and regional new south wales
On Tuesday 05 April 2005 23:13, Charles Rodgers wrote:
I foolishly entered control alt F1
and now my machine will only boot to the command screen.
What is the command to get from the command screen back to XWindows ?
Your help will be much appreciated.
Charles
Ctl+Alt+F1 only moves you
Am Dienstag 5. April 2005 16:37 schrieb Miark:
On Sun, 3 Apr 2005 15:44:42 -0400, JoeHill wrote:
On Sun, 3 Apr 2005 17:38:47 +0100
Elwyn York disseminated the following:
As far as your mail, it's stored in your home dir, which
during even a clean install is not formatted, at least not
Miark wrote:
On Wed, 6 Apr 2005 00:03:33 +0100, Q.H. wrote:
Although I have Acrobat 7, I still use pdftotext to convert
from one to the other. Try that instead and see if it does
any better.
Many thanks Miark. I tried to use pdftotext to convert one or
two pages of two pdf files into text files,
On Apr 6, 2005 3:44 AM, Alberto Omar Rodrigues [EMAIL PROTECTED] wrote:
Is there some site for testing whether one's installed Java Virtual
Machine (JVM) is working fine?
Try this
http://java.com/en/download/help/testvm.xml
Thanks to all who answered my question.
Paul
101 - 200 of 153062 matches
Mail list logo