Hiya
Was planning to do the upgrade today but I loaned my car out and left the 10.2
CDs in there :( Doh!
Anyway, Tried to install Crossover Office and it didnt like it...
[EMAIL PROTECTED] elwyn]$ su
Password:
[EMAIL PROTECTED] elwyn]# '/home/elwyn/install-crossover3.sh'
bash:
Elwyn York wrote:
Hiya
Was planning to do the upgrade today but I loaned my car out and left the 10.2
CDs in there :( Doh!
Anyway, Tried to install Crossover Office and it didnt like it...
[EMAIL PROTECTED] elwyn]$ su
Password:
[EMAIL PROTECTED] elwyn]# '/home/elwyn/install-crossover3.sh'
bash:
On Sun, 10 Apr 2005 21:05:57 +0100
Elwyn York wrote:
Don't undestand where I've gone wrong :(
use
# sh /home/elwyn/install-crossover3.sh
Charles
--
But officer, I was only trying to gain enough speed so I could coast
to the nearest gas station.
-
Mandrake
Is it possible to install mandrake on a computer using sata disks?
Regards Isak
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
Isak Lyberth wrote:
Is it possible to install mandrake on a computer using sata disks?
Regards Isak
Yes.
Well I have, had some trouble with the first release candidate of 10.0
(I think it was) - had to install sata_sil module at boot to install -
but no problems since then.
how do i go about getting to install a sata module during the
installation? i have an intel 82801 SATA controler, its a raid thing.
Regards Isak
Paul wrote:
Isak
Lyberth wrote:
Is it possible to install mandrake on a
computer using sata disks?
Regards Isak
Yes.
Isak Lyberth wrote:
how do i go about getting to install a sata module during the
installation? i have an intel 82801 SATA controler, its a raid thing.
Regards Isak
Paul wrote:
Isak Lyberth wrote:
Is it possible to install mandrake on a computer using sata disks?
Regards Isak
Yes.
Well I have,
i used the 10.1 disk and was asked to prvide a driver
Regards Isak
Paul wrote:
Isak
Lyberth wrote:
how do i go about getting to install a sata
module during the installation? i have an intel 82801 SATA controler,
its a raid thing.
Regards Isak
Paul wrote:
Hi all,
Ive just tried to install Mandrake 10.1, but it keeps
coming up with the following: (this is the last three lines of the output)
RAMDISK: Compress image found at block 0
Invalid compressed format (err=2)
Kernel panic: VFS: Unable to mount root fs on
unknown-block(1,3)
On Tuesday 15 February 2005 01:01 pm, James Nunnerley wrote:
Can anyone assist with what the problem is likely to be?
___
~ maybe a module. such as Reiser file system is not loading?
best rgds
Want to buy your Pack or
On Tuesday 15 February 2005 07:52 am, riccardo wrote:
On Tuesday 15 February 2005 01:01 pm, James Nunnerley wrote:
Can anyone assist with what the problem is likely to be?
___
~ maybe a module. such as Reiser file system is not loading?
best rgds
More likely
Well - I have an install - did not get GUI up so obviously have a couple
of things to sort out. LILO worked great - so thank you to those who
helped. I'll reboot to Mdk and see what I can work out. Printer is
perfect!
Thanks
Rosemary
Kaj Haulrich wrote:
On Monday 07 February 2005 23:25, you
On Monday 07 February 2005 04:40, Rosemary McGillicuddy wrote:
Kaj Haulrich wrote:
happens. I rebooted with disc in situ and get the window with
the two options press F1' and enter to install Looked at F1
and then pressed enter. It appeared to start installing but then
the monitor went
On Monday 07 February 2005 23:25, you wrote:
Sometimes it refuses to boot from CD1, in that case try CD2,
it'll prompt you to change disks later on.
BTW two things :
1. please don't post in html. Most people here filter
html-messages out before they get read.
2. please remove your
Hi
I am attempting to install Mandrake 10.1 on an AMD Athlon 2000+ running
WinXP. I've been to hardware devices list but little detail as it was a
'pre-packaged' system. Display adapter VIA/S3G, legacy audio drivers.
I put the first disc in and the options highlight when I hover the
cursor.
On Sunday 23 Jan 2005 16:35, Cyber Killer wrote:
I see that my post got lost in the discussion, so here goes again...
I got the 10.1 official download dvd. Everything burned OK. I boot the
comp, I see the splash screen, I press F2, type expert, [enter]. The
kernel loads
And that's all
I see that my post got lost in the discussion, so here goes again...
I got the 10.1 official download dvd. Everything burned OK. I boot the
comp, I see the splash screen, I press F2, type expert, [enter]. The
kernel loads
And that's all - I'm left with a blank screen, and nothing else happens.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 23 Jan 2005 16:35, Cyber Killer wrote:
Seagate Barracuda 7200 120 GB
That's a SATA disk, I think? You might like to search the archives for
booting from SATA disks
Anne
- --
Registered Linux User No.293302 (http://counter.li.org/)
Have
Anne Wilson wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 23 Jan 2005 16:35, Cyber Killer wrote:
Seagate Barracuda 7200 120 GB
That's a SATA disk, I think? You might like to search the archives for
booting from SATA disks
no, it's not SATA, it's a standard ATA133 hdd
--
Cyber
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 23 Jan 2005 17:01, Cyber Killer wrote:
Anne Wilson wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 23 Jan 2005 16:35, Cyber Killer wrote:
Seagate Barracuda 7200 120 GB
That's a SATA disk, I think? You might like
On Sunday 23 Jan 2005 16:35, Cyber Killer wrote:
Here is a list of my hardware:
cpu: P4 1700
ram: 256 MB RAMBUS
gfx: Radeon 7200 64 MB
snd: SB Live! Player 1024
hdd: Seagate Barracuda 7200 120 GB
dvd: LG GDR-8162B
cdrw: LG GCE-8524B
lan: Realtek RTL8139
+ some stuff connected to USB, a
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 23 Jan 2005 17:30, Elwyn wrote:
On Sunday 23 Jan 2005 16:35, Cyber Killer wrote:
Here is a list of my hardware:
Have you tried having unplugged your extra USB things incase there is a
problem there??
That's a good point. Setting them
On Sunday 23 Jan 2005 16:35, Cyber Killer wrote:
+ some stuff connected to USB, a scanner, a printer,...
http://www.osnews.com/story.php?news_id=7320page=3
This chap has written a review on Mandrake 10 and has stated he's had problems
with the Hotplug feature... Usb Devices??
Cheers, Elwyn
I got the 10.1 official download dvd. Everything burned OK. I boot the
comp, I see the splash screen, I press F2, type expert, [enter]. The
kernel loads
And that's all - I'm left with a blank screen, and nothing else happens.
I had the same problem with 10.0, but then I thought I just
On Saturday 16 October 2004 10:08 am, Boyi Zeng wrote:
Hello,
Yesterday I tried to install mandrake linux 10.1 to my notebook.
The installation process is smooth. But I got problem at the startup
after installation. The error message is like that:
checking root partition:
fsck.ext3:
Hello, Thanks for your reply. I reinstalled mandrake, and choose LILO
as the boot loader, and then it worked. Since I installed Linux from
hard disk. there seems to be no method for me to edit the menu.lst or
the fstab. Anyway, the problem is solved. Thank you.
On Sun, 17 Oct 2004 07:40:32
Hello,
Yesterday I tried to install mandrake linux 10.1 to my notebook.
The installation process is smooth. But I got problem at the startup
after installation. The error message is like that:
checking root partition:
fsck.ext3: unable to resolve 'LABEL=/'
I had windows XP in my notebook
On Thu, 2004-07-29 at 03:34, paul mccarthy wrote:
I'm sure this question has been asked before in various forms for various
drivers but I can't find the answer on the site.
I have a scsi CD (HP CDwriter) running off an Advansys SCSI card (narrow).
I had absolutely no problems with
I'm sure this question has been asked before in various forms for various
drivers but I can't find the answer on the site.
I have a scsi CD (HP CDwriter) running off an Advansys SCSI card (narrow).
I had absolutely no problems with installing Mandrake linux up through the
various beta and RC
On Mon, Jul 26, 2004 at 07:11:14AM +0200, Marc Hultquist wrote:
/var/www/html
In-correct. By default apache2 installs its htdocs/ in the folder where
everything else is installed, I.E if when installing apache you do as follows
./configure --prefix=/apache/ your apache will be installed
On Mon, 26 Jul 2004 09:57:05 -0400
Todd Slater [EMAIL PROTECTED] wrote:
On Mon, Jul 26, 2004 at 07:11:14AM +0200, Marc Hultquist wrote:
/var/www/html
In-correct. By default apache2 installs its htdocs/ in the
folder where everything else is installed, I.E if when
installing apache
On Monday, 26 July 2004 15:57, Todd Slater wrote:
On Mon, Jul 26, 2004 at 07:11:14AM +0200, Marc Hultquist wrote:
/var/www/html
In-correct. By default apache2 installs its htdocs/ in the folder where
everything else is installed, I.E if when installing apache you do as
follows
for my english :
Best Regards
Tomas Tudja
- Original Message -
From: Todd Slater [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, July 26, 2004 2:57 PM
Subject: Re: [newbie] Installation folder for Apache 2 ???
On Mon, Jul 26, 2004 at 07:11:14AM +0200, Marc Hultquist wrote
OTOH, I've had more trouble with lesser problems. I just spent two
hours with a network problem. The rj45 wasn't plugged in.
Ya I done that as well in the past :-)
--
Marc Hultquist ([EMAIL PROTECTED])
Computerkit Systems (Pty) Ltd
http://www.cks.co.za
(P) +27 11 695 5317
(F) +27 11
Gentlemen,
I have installed Apache 2 + PHP + mysql with Mandrake linux 10.00.
In Apache installation there is a folder called htdocs where we put
all data i.e. HTML files,
PHP code and other stuff.
However I did not see this htdocs folder nor Apache2 installation
folder. I tried searching
every
On Mon, 26 Jul 2004 00:28:12 -0400
Sujit Apte [EMAIL PROTECTED] wrote:
Gentlemen,
I have installed Apache 2 + PHP + mysql with Mandrake linux 10.00.
In Apache installation there is a folder called htdocs where we
put all data i.e. HTML files,
PHP code and other stuff.
However I did not
On Mon, 26 Jul 2004 00:28:12 -0400
Sujit Apte [EMAIL PROTECTED] wrote:
Gentlemen,
I have installed Apache 2 + PHP + mysql with Mandrake linux 10.00.
In Apache installation there is a folder called htdocs where we
put all data i.e. HTML files,
PHP code and other stuff.
However I did not
/var/www/html
In-correct. By default apache2 installs its htdocs/ in the folder where
everything else is installed, I.E if when installing apache you do as follows
./configure --prefix=/apache/ your apache will be installed in
obviously /apache/ and your htdocs will be in /apache/htdocs/ !
Hardware: ThinkPad X21 with UltraBay; newly obtained
PCMCIA fax/modem card to use to dial up my ISP.
Question: Should the fax/modem card be inserted first
and then a new Linux installation performed or should
the card be inserted while Linux is running and it
will be recognized so that it can be
nut megger wrote:
Hardware: ThinkPad X21 with UltraBay; newly obtained
PCMCIA fax/modem card to use to dial up my ISP.
Question: Should the fax/modem card be inserted first
and then a new Linux installation performed or should
the card be inserted while Linux is running and it
will be recognized
I got the following error while trying to install
the 64 bit version:
FATAL ERROR IN STAGE1 I/O Error
It says it can't recover and I should
reboot?
Any help would be great.
for some reason, try to burn the cd again.
Marcin
- Original Message -
From:
Steve
Turner
To: [EMAIL PROTECTED]
Sent: Friday, March 19, 2004 8:12
AM
Subject: [newbie] Installation
Problem
I got the following error while trying to install
the 64 bit version
ubject: Re: [newbie]
Installation Problem
I had the same error with a 32b version. Do
you install from CD? If so the cd you use might be bad. I tried to
do network install and it worked (well, I had a different error and I still
haven't installed the os, but that's different story). If
Hardware is all new.
- Original Message -
From:
Ayares, Mark
(Mark)
To: '[EMAIL PROTECTED]'
Sent: Friday, March 19, 2004 8:32
AM
Subject: RE: [newbie] Installation
Problem
Depending on how old the hardware is, I have had success with older
machine
On Friday 19 March 2004 10:12 am, Steve Turner wrote:
I got the following error while trying to install the 64 bit version:
FATAL ERROR IN STAGE1 I/O Error
It says it can't recover and I should reboot?
Any help would be great.
I agree about hitting 'f1', if you get that far, but if
On Sat, 2004-03-20 at 10:05, et wrote:
On Friday 19 March 2004 10:12 am, Steve Turner wrote:
I got the following error while trying to install the 64 bit version:
FATAL ERROR IN STAGE1 I/O Error
It says it can't recover and I should reboot?
Any help would be great.
I agree about
Sorry this is going to be long.
I begin by installing on a spare 30G disk, unplugged main disk and installed
WC300. Installation went ok but somehow missed configuration for mouse.
The mouse worked fine during install but would not work at all after booting
into new system(wouldnt move or react
On Friday 26 December 2003 10:56 pm, Steven Nelson droned on:
Hi, tried the command. It stated to enter a valid installation path. Do you
know where else the installation path could be?
Try the command which mozilla on your machine. If its in your path, it will
tell you where it is.
If its
Blomquist [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Installation path of Mozilla.
Date: Fri, 26 Dec 2003 23:27:40 -0800
On Friday 26 December 2003 10:56 pm, Steven Nelson droned on:
Hi, tried the command. It stated to enter a valid installation path. Do
On Saturday 27 December 2003 06:56, Steven Nelson wrote:
Hi, tried the command. It stated to enter a valid installation
path. Do you know where else the installation path could be?
Try slocate mozilla (you may have to install slocate). It's probably
looking for the plugins directory.
Anne
--
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Saturday 27 December 2003 1:09 am, Steven Nelson wrote:
The installation said, try /usr/lib/mozilla, Mozilla was at
/usr/bin/Mozilla.
From,
Steven
Before you work yourself into a lather and start screaming
Trying to install Macromedia Flashplayer. During installation it asks for
the installation path of Mozilla. Will somebody tell me the installation
path of Mozilla in Mandrake 9.2?
From,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Friday 26 December 2003 11:24 pm, Steven Nelson wrote:
Trying to install Macromedia Flashplayer. During installation it asks for
the installation path of Mozilla. Will somebody tell me the installation
path of Mozilla in Mandrake 9.2?
,
Steven
From: Charlie Mahan [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Installation path of Mozilla.
Date: Fri, 26 Dec 2003 23:40:28 -0700
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Friday 26 December 2003 11:24 pm, Steven Nelson wrote:
Trying
On Wednesday 19 November 2003 02:13, Greg Meyer wrote:
On Tuesday 18 November 2003 06:44 pm, Melissa Reese wrote:
It seems that I haven't properly configured my monitor and/or the X
server thing. How can I go back and try this again? Can I just boot
up with the first installation CD and
Melissa Reese wrote:
Okay...I did install Mandrake, but I may have missed something crucial
with regards to the X server thingy.
It seems that I haven't properly configured my monitor and/or the X
server thing. How can I go back and try this again? Can I just boot
up with the first
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi John,
On Tuesday, November 18, 2003, at 11:38:43 PM PST, you wrote:
Of course you can start all over again, and maybe you ought to, just
for experience, but linux offers you many solutions, you can run
XFdrake from that root terminal instead,
Melissa Reese wrote:
Hi John,
Vendor: Silicon Integrated Systems
Bus: PCI
Bus Identification: 1039:900:1043:80a7
Location on the Bus: 0:4:0
Description: SiS900 10/100 Ethernet
Module: sis900
Media Class: NETWORK_ETHERNET
Then, it also detects this:
Vendor: USB Ethernet [pegasus]
Bus: USB
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi John,
On Wednesday, November 19, 2003, at 12:58:05 AM PST, you wrote:
Cann't help the ethernet cards, no previous experience, nor cable
modems.
What sort of dialup modem do you have ?
Well, here's a peculiar update. I was just over in
Melissa Reese wrote:
Hi John,
What sort of dialup modem do you have ?
Well, here's a peculiar update. I was just over in Mandrake, and I
finally at least got the dial-up working!
Good,
I was able to receive your message in Kmail, but I couldn't send my
reply from there. The error message
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
I decided to give the installation a go by myself, figuring that if I
messed it up, I could just abort and wait until my friend could be
here to hold my hand. Here's the story so far (I'm pretty sleepy, so
I hope I get this right)...
I have two
On Tuesday 18 Nov 2003 10:34 am, Melissa Reese wrote:
Hi,
I decided to give the installation a go by myself, figuring that if
I messed it up, I could just abort and wait until my friend could
be here to hold my hand. Here's the story so far (I'm pretty
sleepy, so I hope I get this right)...
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Anne,
On Tuesday, November 18, 2003, at 3:22:05 AM PST, you wrote:
Select 'Custom disk partitioning'
There you should see your two disks. Choose the one you want for
install,
Thanks Anne. Here's a small update...
This time around, I got
On Tuesday 18 November 2003 06:57 am, Melissa Reese wrote:
This time around, I got to the next step of choosing the drive (and
many other options for partitioning), and again I stopped...just to be
safe. There were two tabs (hda and hdb), and the second tab did
look like the 20 GB drive I
I've changed the subject line, as someone has pointed out to me that
the word 'aborted' is causing the thread to be dropped by some mail
filters.
On Tuesday 18 Nov 2003 11:57 am, Melissa Reese wrote:
Hi Anne,
On Tuesday, November 18, 2003, at 3:22:05 AM PST, you wrote:
Select 'Custom
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello Anne,
Tuesday, November 18, 2003, 4:22:05 AM, you wrote:
Choose the one you want for install, and make a partition for /home
(so that if you get any data on it you will be able to re-install or
upgrade without losing your data). I assume
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, 18 Nov 2003 07:36:11 -0700, Nick Andriash [EMAIL PROTECTED]
wrote about Re: [newbie] Installation aborted - by me:
Choose the one you want for install, and make a partition for /home
(so that if you get any data on it you will be able to re
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi Bryan,
On Tuesday, November 18, 2003, at 4:07:03 AM PST, you wrote:
I don't know what kind of computer you have but just a quick guess.
Some of the proprietary computers like Compaq, etc. often create a
small partition on the beginning of the
Nick Andriash wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello Anne,
Tuesday, November 18, 2003, 4:22:05 AM, you wrote:
Choose the one you want for install, and make a partition for /home
(so that if you get any data on it you will be able to re-install or
upgrade without losing your
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tue, 18 Nov 2003 12:07:05 -0800, Melissa Reese [EMAIL PROTECTED] wrote
about Re: [newbie] Installation aborted - by me:
The starter guide also suggests possibly changing a setting or two in
the BIOS in order to make the installation smoother
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Tuesday 18 November 2003 1:07 pm, Melissa Reese wrote:
Hi Bryan,
snip
This is a custom built computer, so I'll have to ask the guy who built
it if he can explain what the MDK installation was seeing.
As long as I can be very sure that I'm only
Melissa Reese wrote:
As long as I can be very sure that I'm only messing with my 20 GB
drive, I'll be happy to stumble through some more trial and error
myself, because if all I mess up is the fresh drive with no essential
data on it yet, I can always just start over. However, there's another
On Tuesday 18 November 2003 03:07 pm, Melissa Reese wrote:
Hi Bryan,
As long as I can be very sure that I'm only messing with my 20 GB
drive, I'll be happy to stumble through some more trial and error
myself, because if all I mess up is the fresh drive with no essential
data on it yet, I can
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Tuesday 18 November 2003 12:51 pm, John Richard Smith wrote:
Melissa Reese wrote:
As long as I can be very sure that I'm only messing with my 20 GB
drive, I'll be happy to stumble through some more trial and error
myself, because if all I mess
Charlie M. wrote:
Tuesday 18 November 2003 12:51 pm, John Richard Smith wrote:
Melissa Reese wrote:
As long as I can be very sure that I'm only messing with my 20 GB
drive, I'll be happy to stumble through some more trial and error
myself, because if all I mess up is the fresh drive with no
On Tuesday 18 November 2003 06:44 pm, Melissa Reese wrote:
It seems that I haven't properly configured my monitor and/or the X
server thing. How can I go back and try this again? Can I just boot
up with the first installation CD and start all over again?
Yes, but we can probably fix it
Matt Dynice wrote:
Hello,
I am really new to Linux and I have a couple questions regarding the
partitioning section of the install (I read the quick start manual and
it didn't help.) First off I am running on Windows 2000 Pro on one
hard drive and my second hard drive is what I want to run
Hello,
I am really new to Linux and I have a couple
questions regarding the partitioning section of the install (I read the quick
start manual and it didn't help.) First off I am running on Windows 2000
Pro on one hard drive and my second hard drive is what I want to run Mandrake
9.2 on.
PROTECTED]
Sent: Sunday, November 02, 2003 12:44
AM
Subject: [newbie] Installation help with
partitioning
Hello,
I am really new to Linux and I have a couple
questions regarding the partitioning section of the install (I read the quick
start manual and it didn't help
Dennis Myers wrote:
On Friday 05 September 2003 01:24 pm, [EMAIL PROTECTED] wrote:
Hi Tony,
I used that link. Many packages gave me the message:
The signature of the package xxx is not correct
No GPG signature package
Do you want to install it anyway?
Is there a
http://plf.zarb.org/~nanardon/urpmiweb.php .
Tony.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Friday, September 05, 2003 8:14 AM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Installation problem.
Hi,
I went and installed the LM9.0 back. It worked fine unlike
On Friday 05 September 2003 01:24 pm, [EMAIL PROTECTED] wrote:
Hi Tony,
I used that link. Many packages gave me the message:
The signature of the package xxx is not correct
No GPG signature package
Do you want to install it anyway?
Is there a way to fix this?
Any hints anybody? I want LM9.1 to work on my machine, like win2k does
and LM9.0 did.
During installation of LM9.1, the graphics card was recognized correctly
(RIVA TNT2 with 32Megs) but the Futura monitor was not. Many alternate
monitors from the generic monitor list and many combinations of
Any hints anybody?
[EMAIL PROTECTED] wrote:
Shame, the win2k is working and the LM9.1 on the same machine is not.
[EMAIL PROTECTED] wrote:
Hi,
During installation of LM9.1, the graphics card was recognized
correctly (RIVA TNT2 with 32Megs) but the Futura monitor was not. Many
alternate
Hi,
During installation of LM9.1, the graphics card was recognized correctly
(RIVA TNT2 with 32Megs) but the Futura monitor was not. Many alternate
monitors from the generic monitor list and many combinations of
horizontal rate, vertical rate, resolutions and colors for custom
monitor
Shame, the win2k is working and the LM9.1 on the same machine is not.
[EMAIL PROTECTED] wrote:
Hi,
During installation of LM9.1, the graphics card was recognized correctly
(RIVA TNT2 with 32Megs) but the Futura monitor was not. Many alternate
monitors from the generic monitor list and many
On Sat, 2003-08-09 at 22:42, Charles A Edwards wrote:
On 09 Aug 2003 19:56:16 -0400
ed tharp [EMAIL PROTECTED] wrote:
if you are installing 9.1, there is no expert mode, like there was
in 7.0-9.0, but in some sections (like configuring the network) you
can chose an expert mode.
There
I have to install my linux by passing the argument linux vga=normal
*Ty Charles :)* to the Kernel to get video. While doing so is fine, i
get a normal installation I want the installer to use Expert mode.
Can i add another arg to that line to pass to the kernel? if so syntax
pls?
Ty
--
On Sat, 2003-08-09 at 17:18, Heather/Femme wrote:
I have to install my linux by passing the argument linux vga=normal
*Ty Charles :)* to the Kernel to get video. While doing so is fine, i
get a normal installation I want the installer to use Expert mode.
Can i add another arg to that line
On Sat, 2003-08-09 at 19:56, ed tharp wrote:
On Sat, 2003-08-09 at 17:18, Heather/Femme wrote:
I have to install my linux by passing the argument linux vga=normal
*Ty Charles :)* to the Kernel to get video. While doing so is fine, i
get a normal installation I want the installer to use
On Sat, 2003-08-09 at 22:42, Charles A Edwards wrote:
On 09 Aug 2003 19:56:16 -0400
ed tharp [EMAIL PROTECTED] wrote:
if you are installing 9.1, there is no expert mode, like there was
in 7.0-9.0, but in some sections (like configuring the network) you
can chose an expert mode.
There
On Sat, 2003-08-09 at 19:56, ed tharp wrote:
if you are installing 9.1, there is no expert mode, like there was
in 7.0-9.0, but in some sections (like configuring the network) you
can chose an expert mode.
FFS... thx Ed. Btw whats the link to that mailing list archive you
troll for
On Sunday August 10 2003 02:42 am, Charles A Edwards wrote:
On 09 Aug 2003 19:56:16 -0400
ed tharp [EMAIL PROTECTED] wrote:
if you are installing 9.1, there is no expert mode, like
there was in 7.0-9.0, but in some sections (like configuring
the network) you can chose an expert mode.
On 09 Aug 2003 19:56:16 -0400
ed tharp [EMAIL PROTECTED] wrote:
if you are installing 9.1, there is no expert mode, like there was
in 7.0-9.0, but in some sections (like configuring the network) you
can chose an expert mode.
There is still an expert mode.
It is not avaiable from the default
On Sat, 2003-08-09 at 23:28, Stephen Kuhn wrote:
On Sun, 2003-08-10 at 07:18, Heather/Femme wrote:
I have to install my linux by passing the argument linux vga=normal
*Ty Charles :)* to the Kernel to get video. While doing so is fine, i
get a normal installation I want the installer to
On Sun, 2003-08-10 at 07:18, Heather/Femme wrote:
I have to install my linux by passing the argument linux vga=normal
*Ty Charles :)* to the Kernel to get video. While doing so is fine, i
get a normal installation I want the installer to use Expert mode.
Can i add another arg to that line
On Sat, 2003-08-09 at 18:44, Heather/Femme wrote:
On Sat, 2003-08-09 at 19:56, ed tharp wrote:
On Sat, 2003-08-09 at 17:18, Heather/Femme wrote:
I have to install my linux by passing the argument linux vga=normal
*Ty Charles :)* to the Kernel to get video. While doing so is fine, i
hi
iam trying to install mandrake 9 on my system, after
the initialization, it gives me an error message.
cannot load kernel module in memory
then it quits saying failed in second stage eject
etc...
system is amd k6-2 500mhz, hd is 40gb, installation is
attempted on first partition (5gb), a
I just bought mandrake Power Pack 9.0 I am on
windows XP on the main drive and I have a second drive on fat 32.
Can I install on main drive with win XP without
loosing any XP or do I have to install on second drive that is partitioned
allready I tried on the partition 1 of my secnd drive but
]
Sent: Tuesday, June 10, 2003 10:00 AM
Subject: Re: [newbie] installation
Henri,
You should be fine putting it on the same drive as your Win XP. This is
what a lot of people do who dual-boot their machines.
I'm curious, what errors or problems did you get when you put it on the
second
1 - 100 of 515 matches
Mail list logo
