[newbie] No Sound in Kaffeine with Mary Gauthier video
Hi folks, This music video (which is Quicktime - I think) gives me pictures but no sound when played in Kaffeine. Sound is OK with other music vids and CDs. Is there some add-on that I need to download, or any way of tweaking the program? Any pointers would be appreciated. -- Graham Watkins It
Re: [newbie] CD sound
Sent: Wednesday, March 09, 2005 3:50 AM Subject: Re: [newbie] CD sound On Wednesday 09 Mar 2005 05:59, Teilhard Knight wrote: The advice Kaj gave is good install xmms-cdread and configure xmms to read audio CDs through IDE See my page here http://www.jennings.homelinux.net
Re: [newbie] CD sound
On Wednesday 09 Mar 2005 05:59, Teilhard Knight wrote: The advice Kaj gave is good install xmms-cdread and configure xmms to read audio CDs through IDE See my page here http://www.jennings.homelinux.net/audio_cd.html Thanks so much, Derek. As it happens there is a home theatre attached
Re: [newbie] CD sound
From: Anne Wilson [EMAIL PROTECTED] To: newbie@linux-mandrake.com Sent: Wednesday, March 09, 2005 3:50 AM Subject: Re: [newbie] CD sound On Wednesday 09 Mar 2005 05:59, Teilhard Knight wrote: The advice Kaj gave is good install xmms-cdread and configure xmms to read audio CDs through IDE See
Re: [newbie] CD sound
From: Derek Jennings [EMAIL PROTECTED] To: newbie@linux-mandrake.com Sent: Sunday, March 06, 2005 6:24 PM Subject: Re: [newbie] CD sound On Monday 07 March 2005 00:03, Teilhard Knight wrote: The wiring is OK in the three computers. I can listen to CD music in other OSs. Teilhard
Re: [newbie] CD sound
From: Greg Meyer [EMAIL PROTECTED] To: newbie@linux-mandrake.com Sent: Monday, March 07, 2005 10:24 PM Subject: Re: [newbie] CD sound On Sunday 06 March 2005 07:24 pm, Derek Jennings wrote: Windows does not need the analogue cable since it reads audio CDs using the IDE interface. So to save money
Re: [newbie] CD sound
On Sunday 06 March 2005 07:24 pm, Derek Jennings wrote: Windows does not need the analogue cable since it reads audio CDs using the IDE interface. So to save money many computer manufacturers omit the audio cable. The advice Kaj gave is good install xmms-cdread and configure xmms to read
Re: [newbie] No sound suddenly (fixed)
--- Frans Ketelaars [EMAIL PROTECTED] wrote: On Friday 04 March 2005 08:46, Alejandro R. Estrada wrote: I have MDK 10.1 Community and I love it. Just recently, actually today I tried to play my reggae streams from http://www.bigupradio.com as usual with amarok, and it played fine,
[newbie] CD sound
After a lot of struggling with alsamixer and other programs, I was able to get sound from 3 computers. I was all happy until I decided to listen to a CD. No sound. I have looked everywhere I can see and see no problem. Also, when one goes to configure your desktop-sound-sound system, there is a
Re: [newbie] CD sound
On Sunday 06 March 2005 04:23 pm, Teilhard Knight wrote: After a lot of struggling with alsamixer and other programs, I was able to get sound from 3 computers. I was all happy until I decided to listen to a CD. No sound. I have looked everywhere I can see and see no problem. Also, when one
Re: [newbie] CD sound
On Sunday 06 March 2005 23:23, Teilhard Knight wrote: After a lot of struggling with alsamixer and other programs, I was able to get sound from 3 computers. I was all happy until I decided to listen to a CD. No sound. I have looked everywhere I can see and see no problem. Also, when one goes
Re: [newbie] CD sound
From: Dennis Myers [EMAIL PROTECTED] To: newbie@linux-mandrake.com Sent: Sunday, March 06, 2005 4:44 PM Subject: Re: [newbie] CD sound On Sunday 06 March 2005 04:23 pm, Teilhard Knight wrote: After a lot of struggling with alsamixer and other programs, I was able to get sound from 3 computers. I
Re: [newbie] CD sound
On Monday 07 March 2005 00:03, Teilhard Knight wrote: The wiring is OK in the three computers. I can listen to CD music in other OSs. Teilhard That is not proof the wiring is OK Windows does not need the analogue cable since it reads audio CDs using the IDE interface. So to save money
Re: [newbie] CD sound
From: Kaj Haulrich [EMAIL PROTECTED] To: newbie@linux-mandrake.com Sent: Sunday, March 06, 2005 4:58 PM Subject: Re: [newbie] CD sound On Sunday 06 March 2005 23:23, Teilhard Knight wrote: After a lot of struggling with alsamixer and other programs, I was able to get sound from 3 computers. I
Re: [newbie] No sound suddenly
On Friday 04 March 2005 08:46, Alejandro R. Estrada wrote: I have MDK 10.1 Community and I love it. Just recently, actually today I tried to play my reggae streams from http://www.bigupradio.com as usual with amarok, and it played fine, but with no sound. I tried opening Kmix to checked if
Re: [newbie] No sound suddenly
I almost was the the same situation as yours. You can reconfigure ALSA by alsactrl as a root. HTH. Q.H.Wang Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] No sound suddenly
I almost was the the same situation as yours. You can reconfigure ALSA by alsaconf as a root. HTH. Q.H.Wang Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] No sound suddenly
I have MDK 10.1 Community and I love it. Just recently, actually today I tried to play my reggae streams from http://www.bigupradio.com as usual with amarok, and it played fine, but with no sound. I tried opening Kmix to checked if something was accidentally muted, and it crashed while opening.
[newbie] No Sound in Kobo Deluxe in KDE M10 Official 2nd Post
Hello All, I am wondering why I don't have sound in this particular game. Sound works on this Dell Inspiron 7500 laptop using the snd-es1968 driver for the ES1978 Maestro 2E built-in sound card in KDE my gui of choice and in other games. I did, on install, use the Alt1 kernel so I am using
[newbie] No Sound in Kobo Deluxe in KDE M10 Official
Hello All, I am wondering why I don't have sound in this particular game. Sound works on this Dell Inspiron 7500 laptop using the snd-es1968 driver for the ES1978 Maestro 2E built-in sound card in KDE my gui of choice and in other games. I did, on iinstall, use the Alt1 kernel so I am
[newbie] Re: Sound Level Settings Keeps Going Back to Mute
Sevatio wrote: For some reason, Mdk10.1ce's audio level settings keep going back to mute everytime I log back into KDE. How do you make it remember your settings? Thanks, Sevatio On my 10.0, it Kmix that muted the sound at each Kde start. -- /Björn
Re: [newbie] dvd:rip - sound tracks
Em Sáb, 2004-10-23 às 15:04, Tom Brinkman escreveu: My question is about DVD's with multiple sound tracks. Ususally two in english, and one in french. Is there an easy way to tell before transcoding which english track is the movie sound track, and which is (usually) a track that
[newbie] dvd:rip - sound tracks
No problem using dvd:rip to rip and trancode DVD's to .avi files I can burn to CDr's. MOF, I'm surprised how well it all works, and the .avi CD's are near DVD sound and video quality. My question is about DVD's with multiple sound tracks. Ususally two in english, and one in french.
Re: [newbie] 10.1 sound volume 'problem'
John Richard Smith wrote: Azrael wrote: Are you getting output on all 5 speaker ? John I am getting output on the 2 front and 2 rear speakers. Unusual to have a 4 channel , multichannel setup, but it seems you have output all around though I think it ought to be at least 5 channels, sometimes
Re: [newbie] 10.1 sound volume 'problem'
John Richard Smith wrote: Azrael wrote: I have a sound blaster live (platignum), it is 5.1 and I have 5.1 speakers. And it worked perfectly on every version of mandrake I can remember (i.e. 9 onwards). Really is weirdly annoying Are you getting output on all 5 speaker ? John I am getting
Re: [newbie] 10.1 sound volume 'problem'
Azrael wrote: Are you getting output on all 5 speaker ? John I am getting output on the 2 front and 2 rear speakers. Unusual to have a 4 channel , multichannel setup, but it seems you have output all around though I think it ought to be at least 5 channels, sometimes 6. However, when I run
[newbie] No Sound with Kobo Deluxe
Hi All, Am running a Dell Inspiron 7500 with M10PP. Seems that although sound works in kde and in say Frozen Bubble but not in Kobo Deluxe. I have a my sound set to snd-es1968 with alsa as this seems to be the all round way to get sound working in all apps with the noted exception of KD.
Re: [newbie] 10.1 sound volume 'problem'
Azrael wrote: I have a sound blaster live (platignum), it is 5.1 and I have 5.1 speakers. And it worked perfectly on every version of mandrake I can remember (i.e. 9 onwards). Really is weirdly annoying Are you getting output on all 5 speaker ? John
[newbie] 10.1 sound volume 'problem'
I just did my first fresh install of 10.1 (keeping my former /home), and everything is working well, except for an issue with the volume. In xine, or mplayer, when I try to change the volume, the volume does not get quieter or louder. If I use the gnome volume panel applet, ditto, can't change
Re: [newbie] 10.1 sound volume 'problem'
Azrael wrote: I just did my first fresh install of 10.1 (keeping my former /home), and everything is working well, except for an issue with the volume. In xine, or mplayer, when I try to change the volume, the volume does not get quieter or louder. If I use the gnome volume panel applet,
Re: [newbie] 10.1 sound volume 'problem'
John Richard Smith wrote: Azrael wrote: I just did my first fresh install of 10.1 (keeping my former /home), and everything is working well, except for an issue with the volume. In xine, or mplayer, when I try to change the volume, the volume does not get quieter or louder. If I use the gnome
Re: [newbie] 10.1 sound volume 'problem'
Azrael wrote: John Richard Smith wrote: Azrael wrote: I just did my first fresh install of 10.1 (keeping my former /home), and everything is working well, except for an issue with the volume. In xine, or mplayer, when I try to change the volume, the volume does not get quieter or louder. If I
Re: [newbie] 10.1 sound volume 'problem'
John Richard Smith wrote: Azrael wrote: John Richard Smith wrote: Azrael wrote: I just did my first fresh install of 10.1 (keeping my former /home), and everything is working well, except for an issue with the volume. In xine, or mplayer, when I try to change the volume, the volume does not get
Re: [newbie] no sound mandr 10 dell laptop inspiron 8600
Can you find alsa (in services) running out there? It seems not (or it's corrupted by oss). Try to install alsa-utils package from CD1 then run alsaconf to configure it. HTH. Want to buy your Pack or Services from MandrakeSoft? Go to
Re: [newbie] .mov sound
On Mon, 16 Aug 2004 17:37:32 -0500 John Drouhard [EMAIL PROTECTED] wrote: as root, modprobe snd_seq_oss snd_mixer_oss snd_pcm_oss john # modprobe snd_seq_oss snd_mixer_oss snd_pcm_oss FATAL: Error inserting snd-seq-oss (/lib/modules/2.6.3-7mdk/kernel/sound/core/seq/oss/snd-seq-oss.ko.g
Re: [newbie] .mov sound
On Tue, 17 Aug 2004 08:07:05 -0500 John Drouhard [EMAIL PROTECTED] wrote: # modprobe snd_seq_oss snd_mixer_oss snd_pcm_oss FATAL: Error inserting snd-seq-oss (/lib/modules/2.6.3-7mdk/kernel/sound/core/seq/oss/snd-seq-oss. ko.g z): Unknown symbol in module, or unknown parameter (see
Re: [newbie] .mov sound
On Tuesday 17 August 2004 15:49, C. Tresenriter wrote: On Tue, 17 Aug 2004 08:07:05 -0500 John Drouhard [EMAIL PROTECTED] wrote: # modprobe snd_seq_oss snd_mixer_oss snd_pcm_oss FATAL: Error inserting snd-seq-oss (/lib/modules/2.6.3-7mdk/kernel/sound/core/seq/oss/snd-seq-oss. ko.g
Re: [newbie] .mov sound
On Tue, 17 Aug 2004 18:45:25 +0200 Frans Ketelaars [EMAIL PROTECTED] wrote: I think modprobe accepts only _one_ module name as parameter, so you would use: # modprobe snd_seq_oss # modprobe snd_pcm_oss # modprobe snd_mixer_oss # If you get back the command prompt everything went ok, but
[newbie] .mov sound
I'm getting no sound while playing .mov files in Totem. What should I be looking for to resolve this issue? Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] .mov sound
On Monday 16 Aug 2004 13:35, C. Tresenriter wrote: I'm getting no sound while playing .mov files in Totem. What should I be looking for to resolve this issue? Is it just .mov files? Possible causes may be :- Your mixer control is muted :- Play with all the sliders. Try a different sound
Re: [newbie] .mov sound
On Mon, 16 Aug 2004 13:57:13 +0100 Derek Jennings [EMAIL PROTECTED] wrote: On Monday 16 Aug 2004 13:35, C. Tresenriter wrote: I'm getting no sound while playing .mov files in Totem. What should I be looking for to resolve this issue? Is it just .mov files? Possible causes may be :-
Re: [newbie] .mov sound
My last post was a little misleading. I had tried alsa before I'd posted the original question. Don't remember exactly when I saw the ...null output messaage but it wasn't when I tried alsa - that just gave no sound as with oss. Want to buy
Re: [newbie] .mov sound
i get that too the fix.. use mplayer :-)) On Monday 16 Aug 2004 H:57, Derek Jennings wrote: On Monday 16 Aug 2004 13:35, C. Tresenriter wrote: I'm getting no sound while playing .mov files in Totem. What should I be looking for to resolve this issue? Is it just .mov files? Possible
Re: [newbie] .mov sound
C. Tresenriter wrote: On Mon, 16 Aug 2004 13:57:13 +0100 Derek Jennings [EMAIL PROTECTED] wrote: On Monday 16 Aug 2004 13:35, C. Tresenriter wrote: I'm getting no sound while playing .mov files in Totem. What should I be looking for to resolve this issue? Is it just .mov files? Possible causes
[newbie] No sound MDK 9.0
Well, I yelled too damm soon I guess. I should have RTFArchives first then I would have gotten a clue. As it was when I did the 'update' it didn't put the right entry in my /etc/modules.conf. As it was luckily I back up /home and /etc and I just copied the working modules.conf file back to
[newbie] RE: Sound
I have very happily been using 10.0 officical for a while now and haven't had a lot of problems til now. All of a sudden I am getting a message that states permission is not granted to /dev/dsp. I did a ls -s on it and it pointed to a simlink. I'm not sure where the problem is but here is a
Re: [newbie] Another Sound Issue (with 10.0 Official)...
On Tuesday 08 June 2004 05:47 pm, Travis Crook wrote: Hi All, I've been following the other sound problem threads and can't solve this little problem. Hello, I believe that sound modules which one wishes to use with ALSA have a snd- prefix. Try using this instead. JHM.
Re: [newbie] Another Sound Issue (with 10.0 Official)...
I have the same nForce N2 sound chip as you and I use alsa with aRts and the i8x0 sound setting. It works for me if not entirely well. I also have alsamixer and kmix installed, for some reason when I had aumix installed as well I had some problems with sound levels in some channels and setting,
Re: [newbie] Another Sound Issue (with 10.0 Official)...
On Thu, 2004-06-10 at 11:15, John Richard Smith wrote: I have the same nForce N2 sound chip as you and I use alsa with aRts and the i8x0 sound setting. It works for me if not entirely well. I also have alsamixer and kmix installed, for some reason when I had aumix installed as well I had
Re: [newbie] Another Sound Issue (with 10.0 Official)...
On Tuesday 08 June 2004 23:47, Travis Crook wrote: Hi All, I've been following the other sound problem threads and can't solve this little problem. Here is the situation: Hardware: Abit nv7-133r, nVidia GeForce3 ti200, 512MB RAM, nforce chipset, Athlon XP1500+
[newbie] Another Sound Issue (with 10.0 Official)...
Hi All, I've been following the other sound problem threads and can't solve this little problem. Here is the situation: Hardware: Abit nv7-133r, nVidia GeForce3 ti200, 512MB RAM, nforce chipset, Athlon XP1500+ Distribution: Mandrake 10.0 Official Problem: NO SOUND
Re: [newbie] Another Sound Issue (with 10.0 Official)...
Travis Crook wrote: Hi All, I've been following the other sound problem threads and can't solve this little problem. Here is the situation: Hardware: Abit nv7-133r, nVidia GeForce3 ti200, 512MB RAM, nforce chipset, Athlon XP1500+ Distribution: Mandrake 10.0 Official
Re: [newbie] Another Sound Issue (with 10.0 Official)...
On Tue, 2004-06-08 at 16:41, John Richard Smith wrote: Travis Crook wrote: {snip} [EMAIL PROTECTED] quickbeam]# /sbin/fuser -v /dev/dsp USERPID ACCESS COMMAND /dev/dsp quickbeam 26933 f artsd I have the same sound chip and get the
Re: [newbie] No sound/artsd crash - don't know where to begin (More Info)
Chuck MATTSEN wrote: Have had no problems with sound throughout the day, receiving system notifications, listening to streaming audio off and on, etc. Just tried opening up xmms via Streamtuner, and received a crash notification: The application Sounderserver (artsd) crashed and caused
Re: [newbie] No sound/artsd crash - don't know where to begin
I beliee that I can help or at point you in the right direction. First, it sounds to me as if you are using the oss driver for your sound card. That is ok but IMHO the alsa version is far superior. You can verify which driver you use by running harddrake from the control center, tab to sound card
Re: [newbie] No sound/artsd crash - don't know where to begin
Thomas Wilkowski wrote: I beliee that I can help or at point you in the right direction. First, it sounds to me as if you are using the oss driver for your sound card. That is ok but IMHO the alsa version is far superior. You can verify which driver you use by running harddrake from the
Re: [newbie] No sound/artsd crash - don't know where to begin
Very odd. try this: disable sound systen in kde control reconfigure the knotify script: true/true/true reverify that alsa is up across the board enable the sound system and see what you get. If it is still funky create a new user, something like chuck2. Log out and than log back on as chuck2.
Re: [newbie] No sound/artsd crash - don't know where to begin
Thomas Wilkowski wrote: Very odd. Indeed. And before anyone wastes any more time on this on my account, I'm looking into the possibility that this is the result of an errant update today ... scanning Bugzilla, I see another user with a similar problem and backtrace. So, if that's the case, my
[newbie] Mozart Sound System / legacy
(I tried posting to expert, but it hasn't shown up.) I'm trying to assist a new convert to Mandrake get his sound card up and running. It's a Mad16 thing, and as such one has to use sndconfig to get the card to work (ISA). In fact, I used to have one of these cards a few years ago, and it really
[newbie] No sound/artsd crash - don't know where to begin
Have had no problems with sound throughout the day, receiving system notifications, listening to streaming audio off and on, etc. Just tried opening up xmms via Streamtuner, and received a crash notification: The application Sounderserver (artsd) crashed and caused the signal
[newbie] CD sound only from Totem
Hey all, Weird problem, I can play CD's no problem in Totem (not my favourite), but not GnomeCD, GRip, or ROX-CD. All are set to use /dev/hdd as the CD reader (actually my DVD drive). There does not appear in any of them to be a way to set it to use ALSA or OSS, so I'm not sure if that is the
Re: [newbie] More sound problems.
On Wednesday 28 April 2004 06:19 pm, Marc wrote: I am trying to bring a old machine back from the dead and so far it has been a 100% success with the execption of the sound. I am using a old Sony ASUS MOBO with intergrated sound, 810 intel chipset AC'97 with the snd-intel8x0 driver. The
Re: [newbie] More sound problems.
Marc wrote: I am trying to bring a old machine back from the dead and so far it has been a 100% success with the execption of the sound. I am using a old Sony ASUS MOBO with intergrated sound, 810 intel chipset AC'97 with the snd-intel8x0 driver. The sound is very distorted and also sounds
Re: [newbie] No sound
On Tuesday 13 April 2004 22:47, Per-Olof Litby - Reg'l Mgr Nordic/Baltic - Java System Software - Sun Microsystems wrote: Greetings, I have a problem with the sound system on my HP nx5000 laptop with Mandrake 10.0 CE (kernel 2.6.3-7). The driver module is loaded OK (snd-intel8x0) and the
Re: [newbie] No sound
2004-04-13
Thread
Per-Olof Litby - Reg'l Mgr Nordic/Baltic - Java System Software - Sun Microsystems
Thanks Kaj, But alsamixer does not indicate any problem or muted audio. No manner of fiddling with the levels will get me any sound... /POL Kaj Haulrich wrote: On Tuesday 13 April 2004 22:47, Per-Olof Litby - Reg'l Mgr Nordic/Baltic - Java System Software - Sun Microsystems wrote:
Re: [newbie] No sound
2004-04-13
Thread
Per-Olof Litby - Reg'l Mgr Nordic/Baltic - Java System Software - Sun Microsystems
Found a workaround in a post somewhere: edit /etc/asound.state - find the section that looks like: control.33 { comment.access 'read write' comment.type BOOLEAN iface MIXER name 'External Amplifier Power Down' value true } and change true to false, then run alsactl restore
Re: [newbie] No sound
I'm having the exact same problem getting sound on MDK 10.0. Yesterday, I confirmed, once again, that if I pop in the MDKMove LiveCD, sound works (as it does with every other LiveCD I tried). However, take MDKMove out and boot in to MDK10.0 and sound is gone again. I won't get in to the
Re: [newbie] Crappy Sound, only on Linux
On April 9, 2004 10:35 pm, Marc Resnick wrote: I ripped some music off my CDs and encoded it with LAME at 160 kbps(getting ready for when my iPod comes). When I play it on my MDK 10.0 system, it sounds fuzzy and like it was encoded at 16 kbps. When I booted in Windows and played it, it was
Re: [newbie] Crappy Sound, only on Linux
What version of LAME are you running? It should be 3.9X. What app are you using to encode? Rory On Saturday 10 April 2004 5:50 pm, John Wilson wrote: On April 9, 2004 10:35 pm, Marc Resnick wrote: I ripped some music off my CDs and encoded it with LAME at 160 kbps(getting ready for
Re: [newbie] Crappy Sound, only on Linux
Rory wrote: What version of LAME are you running? It should be 3.9X. What app are you using to encode? Rory On Saturday 10 April 2004 5:50 pm, John Wilson wrote: On April 9, 2004 10:35 pm, Marc Resnick wrote: I ripped some music off my CDs and encoded it with LAME at 160
[newbie] Crappy Sound, only on Linux
I ripped some music off my CDs andencoded it with LAME at 160 kbps(getting ready for when my iPod comes). When I play it on my MDK 10.0 system, it sounds fuzzy and like it was encoded at 16 kbps. When I booted in Windows and played it, it was fine...almost CD Quality? Can anyone lend me
[newbie] Internet sound problems
I'm running Mandrake 10 Comm. and sound is OK on e.g. MP3 CD (so soundcard mixer) is set up but when using internet sound is very low distorted - using Real Audio plug-in for Mozilla Konqueror. Any advice please? Paul M. -- And, in the beginning, Man created god. Karen Armstrong 'The
Re: [newbie] Advanced Sound Program?
On Friday 26 March 2004 07:54 pm, Marc Resnick wrote: - Original Message - From: Aron Smith [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, March 26, 2004 9:48 PM Subject: Re: [newbie] Advanced Sound Program? On Friday 26 March 2004 06:39 pm, Marc Resnick wrote
Re: [newbie] 10.0 sound problems
Scott Mazur wrote: On Tue, 9 Mar 2004 17:11:51 -0600, Marc wrote On Tuesday 09 March 2004 01:48 pm, John Richard Smith wrote: Marc wrote: I am using the ?VT8233 [AC97 Audio Controller] and my sound is very choppy. I had the same problem with 9.2 and 9.1. Does anyone know how to
Re: [newbie] 10.0 sound problems
On Wed, 10 Mar 2004 09:44:27 +, John Richard Smith wrote Just as a matter of interest why would acpi=no or for that matter, any acpi= command affect the sound from VT8233 onboard sound chip ? I have no idea what so ever. I do know that prior to this, the audio playback would
[newbie] 10.0 sound problems
I am using the VT8233 [AC97 Audio Controller] and my sound is very choppy. I had the same problem with 9.2 and 9.1. Does anyone know how to fix this ? TIA Marc KM5KW -- Composed on a 100% Microsoft and windows free computer using Mandrake Linux 10.0 Want to buy your Pack or Services from
Re: [newbie] 10.0 sound problems
Marc wrote: I am using the ?VT8233 [AC97 Audio Controller] and my sound is very choppy. I had the same problem with 9.2 and 9.1. Does anyone know how to fix this ? TIA Marc KM5KW This is your onboard sound chip , so what did you do when you solved the problem in M9.1+M9.2 ? John -- John
Re: [newbie] 10.0 sound problems
On Tuesday 09 March 2004 01:48 pm, John Richard Smith wrote: Marc wrote: I am using the ?VT8233 [AC97 Audio Controller] and my sound is very choppy. I had the same problem with 9.2 and 9.1. Does anyone know how to fix this ? TIA Marc KM5KW This is your onboard sound chip , so what
Re: [newbie] 10.0 sound problems
On Tue, 9 Mar 2004 17:11:51 -0600, Marc wrote On Tuesday 09 March 2004 01:48 pm, John Richard Smith wrote: Marc wrote: I am using the ?VT8233 [AC97 Audio Controller] and my sound is very choppy. I had the same problem with 9.2 and 9.1. Does anyone know how to fix this ? Have you tried
Re: [newbie] 10.0 sound problems
On Tuesday 09 March 2004 05:33 pm, Scott Mazur wrote: On Tue, 9 Mar 2004 17:11:51 -0600, Marc wrote On Tuesday 09 March 2004 01:48 pm, John Richard Smith wrote: Marc wrote: I am using the ?VT8233 [AC97 Audio Controller] and my sound is very choppy. I had the same problem with 9.2
Re: [newbie] 10.0 sound problems
On Tue, 9 Mar 2004 18:38:48 -0600, Marc wrote On Tuesday 09 March 2004 05:33 pm, Scott Mazur wrote: On Tue, 9 Mar 2004 17:11:51 -0600, Marc wrote On Tuesday 09 March 2004 01:48 pm, John Richard Smith wrote: Marc wrote: I am using the ?VT8233 [AC97 Audio Controller] and my sound is
[newbie] SOLVED: sound card problems
I don't know if this will help anyone or not but I just accidently solved my sound problems. I had the same problem with no sound with a Cmedia chipset ( 1878?). I was able to hear audio cd's but nothing else. I double click'd on an mp3 and it opened xmms, which looked as if it was playing
Re: [newbie] SOLVED: sound card problems
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Saturday 06 March 2004 09:11, Troy Thomas Hall wrote: I don't know if this will help anyone or not but I just accidently solved my sound problems. I had the same problem with no sound with a Cmedia chipset ( 1878?). I was able to hear audio
Re: [newbie] SOLVED: sound card problems
Anne Wilson wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Saturday 06 March 2004 09:11, Troy Thomas Hall wrote: I don't know if this will help anyone or not but I just accidently solved my sound problems. I had the same problem with no sound with a Cmedia chipset ( 1878?). I was
Re: [newbie] SOLVED: sound card problems
On Saturday 06 March 2004 04:16 am, Anne Wilson wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Saturday 06 March 2004 09:11, Troy Thomas Hall wrote: I don't know if this will help anyone or not but I just accidently solved my sound problems. I had the same problem with no sound
Re: [newbie] Strange sound problem
Mike Adolf wrote: I do not get any sound at logon but do now get sound at restart. If this refers to kde 's own jingles , it's as flakey as hell, with some mobo's. Perfect with others. In my case it worked at first, they died , and has been ever since. John -- John Richard Smith [EMAIL
Re: [newbie] Strange sound problem
On Sunday 29 Feb 2004 23:40, Mike Adolf wrote: When trying to play DVDs, video is fine but no audio on both Xine and mplayer. So I tried just a CD with Xine, but still no sound. Kscd, however, plays fine and responds to adjustments in both aumix and kmix. What do I look for? mike Audio
[newbie] partial sound
I'm using 10.0rc1 and for some reason I have sound if playing a music cd but not with any other type of sound file. I'm using Gnome. Anyone have any hints? As far as I know I've made sure the ARTS is not installed. Troy Want to buy your Pack or Services from MandrakeSoft? Go to
[newbie] concurrent sound while using 2 programs
Hello everyone.. I have sound notification configured in gaim, but when I play music, all the notifications from gaim are gone. I remember this questions was asked before.. but I can't find it. any help is appreciated... Chungwei Want to buy your Pack or Services from MandrakeSoft? Go to
[newbie] No sound with onboard VIA VT8233 sound card
I have a new motherboard with an onboard VIA VT8233 sound card. I have installed MDK 10 beta 2. Looks great, runs fast, but no sound. I have run alsamixer to ensure volumes are up (although I didn't see a 'master' volume category.). I've also looked at kmix to see if the volume levels are
RE: [newbie] No sound with onboard VIA VT8233 sound card
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Trey Sizemore Sent: 08 February 2004 16:54 To: [EMAIL PROTECTED] Subject: [newbie] No sound with onboard VIA VT8233 sound card I have a new motherboard with an onboard VIA VT8233 sound card. I have
Re: [newbie] No sound with onboard VIA VT8233 sound card
I have a new motherboard with an onboard VIA VT8233 sound card. I have installed MDK 10 beta 2. Looks great, runs fast, but no sound. I have run alsamixer to ensure volumes are up (although I didn't see a 'master' volume category.). I've also looked at kmix to see if the volume levels are
Re: [newbie] No sound with onboard VIA VT8233 sound card
and installed an old Creative card. If you're not as lazy as I am, this old posting from Derek Jennings that may be of help to you: From: Derek Jennings [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: [newbie] no sound with mandrake 9.1 Date: Sat, 20 Sep 2003 21:47:31 +0100 On Saturday 20
[newbie] ALSA sound troubles with Dell Inspiron 5150
Hi everybody I've got this Inspiron 5150 (PIV-3.06, Intel 852PM MoBo, Geforce FX go 5200, 512MB RAM, etc.). I did a new install with the updated CDs from mandrakeclub. I've been trying to get some sound but until now to no avail. XP Home produces sound, so it's not a hardware problem. The strange
Re: [newbie] Boot/Sound Problem
On Thu, 15 Jan 2004 22:15:52 -0800 Russ [EMAIL PROTECTED] wrote: I made a mistake in permissions for /dev/dsp, they are 555. Russ Russ wrote: Hi, When I boot up Linux I keep getting the following error: Sound server informational message: Error while initializing the sound driver:
[newbie] Boot/Sound Problem
Hi, When I boot up Linux I keep getting the following error: Sound server informational message: Error while initializing the sound driver: device /dev/dsp can't be opened (Permission denied) The sound server will continue, using the null output device. Does anyone know what needs to be done
Re: [newbie] Boot/Sound Problem
I made a mistake in permissions for /dev/dsp, they are 555. Russ Russ wrote: Hi, When I boot up Linux I keep getting the following error: Sound server informational message: Error while initializing the sound driver: device /dev/dsp can't be opened (Permission
[newbie] reinstall sound
I posted this earlier, didn't get any help on it so I'm posting it again. I lost every device out of my /dev/sound folder due to some freak Mandrake snafu, so I have no sound in Gnome. Can someone tell me how to reinstall the sound devices? Having to reinstall Mandrake in order to fix this is not
Re: [newbie] reinstall sound
On Monday 12 Jan 2004 2:10 am, James Cammarata wrote: I posted this earlier, didn't get any help on it so I'm posting it again. I lost every device out of my /dev/sound folder due to some freak Mandrake snafu, so I have no sound in Gnome. Can someone tell me how to reinstall the sound
Re: [newbie] reinstall sound [SOLVED]
At 04:01 AM 1/12/2004 +, you wrote: On Monday 12 Jan 2004 2:10 am, James Cammarata wrote: I posted this earlier, didn't get any help on it so I'm posting it again. I lost every device out of my /dev/sound folder due to some freak Mandrake snafu, so I have no sound in Gnome. Can someone
