Se ti riferisci alla SoundBlaster Live, puoi provare 2 strade:
Per prima cosa, nel BIOS, disabilità le voci OSPlugPlay, ESDC.
1) Vai al sito della soundblaster e ti scarichi i drivers. E' l'unica scheda
della Soundblaster di cui sono disponibili i drivers per ambiente Linux nel
sito
2)
Grazie mi 6 stato davvero esaustivo, non ci dovrebbero essere problemi.
ciao e a presto.
- Original Message -
From: Megres [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, December 22, 2000 5:14 PM
Subject: Re: [newbie-it] live
Se ti riferisci alla SoundBlaster Live, puoi provare
ciao a tutti sono nuovo del bel mondo linux , e gia' ho dei
problemi.
Non riesco a configurare la connessione
internet,perche' il sistema operativo
non ha rilevato nessuno dei 2 modem che
ho nel pc : uno interno (il pc è un portatile compaq armada v300:celeron
500mhz;64mb ram ;scheda
Ciao a tutti ,sono ancora io che rompo scusatemi ma ho un altro piccolo
problemino:
i programmi tipo office e anche altri non si caricano è vanno spesso in
crash
da quando è stato installato mandrake
7.2 powerpack ,pochi giorni
fa,partizionando il disco e lasciando
anche windows(purtroppo devo
dear mr. smith
does your problem like this one
if it is so you can do what Aric told me
and my yamaha sc now is working
Salam,
Amin Yuliastanto
===
Yes, thank you very much Aric
right know I listening xmms playing Sugar Ray-Every
Hi,
my system has only two scsi disks. I installed M7.1 from CDROM. when
after installation I tried to reboot, the kernel stops with a kernel
panic: unable to mount root fs.
somebody sugested it is maybe because i installed from (IDE)cdrom, and
my root fs is on a scsi disk. During installation
On Thu, 21 Dec 2000 19:35, Paul Williamson wrote:
Thanks for replying!,
I am booting from the CD on a DVD-Drive (very new!)
I got it on The Linux Pocketbook (www.pocketbooks.net.au)
thanx!
Paul,
Try washing the CD with a detergent and VERY soft cloth or tissue.
Make sure
Have a look at http://www.mandrakeuser.org/hardware/hremov3.html. Make sure
your drive's setup fits the CD-RW setup here.
On Fri, 22 Dec 2000 16:37, Jon Doe wrote:
On Thursday 21 December 2000 11:50 pm, you wrote:
On Thursday 21 December 2000 09:33 pm, you wrote:
First check your
http://uranus.it.swin.edu.au/~jn/linux/Explore2fs.htm.
This link is for Explore2fs, which allows you to read and write (if you have
NT) to an ext2 partition from WIndows.
On Fri, 22 Dec 2000 17:45, Daniel Velzi wrote:
Well, I wasn´t followed all post. But I believe the real problem was Sousa
Christian Reidys wrote:
I hope you find the time answering this one: I have installed mandrake 7.2
via an Abit KT7 Raid board and have to change motherboards to an Asus A7V.
Can I just use the existing mandrake installation or do I have to install
mandrake completely, again?
Thank you
marcia wrote:
Dear All, Whenever I try to save an email to a directory or file I get a
no permission allowed dialog. How do I change this? Thank you for your
help. Marcia
pleas give more details i.e is this after reinstall or was it allways?
From wich account?
If it is in your home directory
marcia wrote:
Dear All, I purchased vmware not too long ago and finally got the nerve
up to begin installing it. After I opened the rpm of vmware 2.00
everything on my screen froze. I waited and waited then finally tried
control-alt-backspace, control-alt-delete, and control-alt-esc.
Paul wrote:
On Thu, 21 Dec 2000, Stefaans Mostert wrote:
Linux Mandrake 7.2 - Pine 4.31
Remember netscape is in fact /usr/bin/netscape/
Give you a clue :-)
Thanks. But the note from Cron was that netscape could not connect to the
display... So netscape was run. Of
Revenant wrote:
IIRC, Debian used to have a DOS/Windows tool that could create a LILO
MBR. Perhaps you could find something like that?
"Mr. Smith" wrote:
Install linux and then Windows and create a boot floppy next time...but
besides that nope. Sorry...I had the same problem at
Kris wrote:
I can't count how many times I have had this happen... and not just
with 7.2 - I had it a lot with 7.0 (486) and 7.1 as well.
I finally gave up trying to install those releases on those particular
machines and went with either Redhat or Slackware. The rest of
the machines had
Revenant wrote:
When I play MPEGs my computer freezes _hard_. I can't switch to other
shells and the only way I've found to escape it is to reboot.
Can anyone tell me please how to isolate and identify the cause of this
problem?
Thank you.
P.S. Thanks to the people who provided
Mark Weaver wrote:
Hi list.
Something strange happened to me today here at work. I had received an
attachment from someone. It was an MS Powerpoint file. On a lark I decided to
attempt and open the file with Star Office. I was curious, so sue me!
Anyway, things didn't go well. X
Dennis Myers wrote:
Which version are you using? 7.1,7.2? If you go to drakeconfig and
click on the boot it will give you a drop down
with make boot floppy on it. Have fun.
i can't boot my installation, therefor i'd like to make a bootdisk from
the cdrom but i'm afraid those bootdisk
Actually I think 'du -H' might be more usefull as a first step. This will
give you the sizes of each directory. It'll be long, but finding the
offending directory will let you find the offending files much quicker.
Just my $.02.
Chris
- Original Message -
From: "Anthony" [EMAIL
Anthony,
Thank you for responding and I really got gassed by doing what you
suggested. That was pretty awesome except it didn't help me find what the
cause of filled disk was. It remains a mystery. And I checked everything
very thoroughly too. I seearched down thru the list twice to make sure I
yes, you are right. However, you can use the cdrom install disk and
choose upgrade instead of new install, then
don't change anything or let it add some programs that weren't installed
to begin with. If you pick custom install
you can choose a single area of functionality, like KDE to add.
When I installed 7.2 onto my 10gb HD, I selected the option to use the entire
disk and the automatic option at the partition option, the result of "df" and
"fdisk p" are below (note I mounted /dev/hda3 manually to obtain the result
in fdisk), My question is :- it appears that I have the
Hi --
I'm running 7.1, and I noticed early on that the PATH repeats itself 3 times on my
system in "X" consoles (konsole is my fave). I noticed also that at a virtual console
(ctrl-alt-f1, for instance), the PATH is as expected -- no duplications.
I injected "echo"s into the logon scripts,
When i try to install Mandrake 7.2 on my Dell C800, it simply hangs when
"configurating my pcima" devices.
Using text mode, various pieces of code was spat out at me, then it reported
various interrupt errors..
any ideas?
Thanks, Mark.
[EMAIL PROTECTED]
ok guys, here I am again. I manage to enter the linux partition by windows
that was a terrifiing experience 4 me, but ok... lol and I was able to copy
the things I wanted to the windows partition again. I just have a little
question not very important but just for saving trouble on re-instaling
I pulled the Linksys and replaced it with a 3com officeconnect. The NIC is
recognized and I can now connect ADSL. The question I have now is this.
What is the difference in setting up DSL using the Internet and Networking
Setup vs. using the LinuxConf and the Network settings there. I notice
That is some really interesting information, and I've used it, however, I'm
still stuck with the same mystery. "How did this happen; why did it happen;
what was it that happened; and most importantly how do I fix it?" The last
question of course depends very much on "what" happened. I have a
Pieter De Troyer wrote:
Hi,
is there a bootdisk image somewhere with which you can make a bootfloppy
that doesn't start the installation? I did the installation already, but
forgot to make the bootfloppy.
P
Use kfloppy and format a floppy leave it in the drive and make sure it
is
On Friday 22 December 2000 15:10, you wrote:
Dennis Myers wrote:
Which version are you using? 7.1,7.2? If you go to drakeconfig and
click on the boot it will give you a drop down
with make boot floppy on it. Have fun.
i can't boot my installation, therefor i'd like to make a bootdisk
This is a good method, but it'd be a bit better to use "du -h" (notice the
lower case 'h'). The difference is that "-H" shows file sizes in binary
format (1000 bytes = 1 KB, etc.) while "-h" gives binary figures (1024 bytes
= 1KB). File sizes are supposed to be measured in binary form (even
On Friday 22 December 2000 04:29, you wrote:
Anthony,
Thank you for responding and I really got gassed by doing what you
suggested. That was pretty awesome except it didn't help me find what
the cause of filled disk was. It remains a mystery. And I checked
everything very thoroughly too. I
Hi, Caroll, this is a bug on the 7.1 installer when run in non-expert
mode.
There is a fix at
http://www.linux-mandrake.com/en/heliumlast.php3
halfway down the page (2nd error scenario).
Download the script and save it as a file and then run it using the
command "perl
Hello:
I'm setting up Linux Mandrake 7.2 on a new machine.
The install goes fine but after the first boot, and it tries to go into X it
terminates and goes to a command line. The video card is an SIS 6326 and the
mother board is a PC200 - Athalon800 - 64meg of ram.
Any thoughts? Please
When was the last time you did a fsck on your partition (either automatically
or manually) ? Linux should maintain your drive well by itself without any
user interaction, but occasionally something can go wrong that Linux misses.
Just remember to unmount your partition before fscking it,
First off, what mail program are you using? Sometimes Pine has a problem
with certain things, one reason why I don't use it.
But it depends on what file permissions you need the file to be. For
example, here's what one folder I have looks like.
-rw--- 1 tdh other 73443 Dec
The curve may be steep, but it will increase your IQ ;
http://www.bbspot.com/News/2000/12/smart.html
Merry Christmas y'all
--
Tom Brinkman [EMAIL PROTECTED] Galveston Bay
On Friday 22 December 2000 15:47, you wrote:
When I installed 7.2 onto my 10gb HD, I selected the option to use the
entire disk and the automatic option at the partition option, the result of
"df" and "fdisk p" are below (note I mounted /dev/hda3 manually to obtain
the result in fdisk), My
On Monday 06 March 2000 14:39, you wrote:
Hello:
I'm setting up Linux Mandrake 7.2 on a new machine. The install goes fine
but after the first boot, and it tries to go into X it terminates and goes
to a command line. The video card is an SIS 6326 and the mother board is a
PC200 -
hello every body:
I'm a newbie to linux/mandrake,after I have installed Mandrake
7.2,every thing seems successful,but my excitement only last a few
seconds.
when reboot after Mandrake installation,my hard drive can not
startup!
some of the error messages appear on screen as
Something is seriously wrong with our network. A station with Win
9x still believes another workstation exists, even though the other
workstation is disconnected. When it was connected, I was able
to use the other workstation to view the files of the workstation
in question.
Next, I tried to
On Friday 22 December 2000 19:02, you wrote:
hello every body:
I'm a newbie to linux/mandrake,after I have installed Mandrake 7.2,every
thing seems successful,but my excitement only last a few seconds.
when
reboot after Mandrake installation,my hard drive can not startup!
some of the
Does know how to install WordPerfect 8 for linux on LM 7.2?
Thanks
I have a Compaq 1200XL Laptop (using all the internal drivers and adapters)
and after installing Mandrake 7.2 I can't get the X Window System to display
properly. I run Xconfigurate and it appears to properly configure my
monitor (using a generic 70hz, superVGA) but when I run X the screen
Thanks Alex, but that wasn't it either. But we've got to be getting close.
This is very weird!
Mark
On Friday 22 December 2000 11:10, you wrote:
On Friday 22 December 2000 04:29, you wrote:
Anthony,
Thank you for responding and I really got gassed by doing what you
suggested. That was
hi, ive just installed mandrake 7.1.
my modem dont respond or anything what shall i do?
thanks
mike
You'd better try explaining it better if you expect any help that might
help. Let's dissect it:
-Original Message-
From: SoloCDM [mailto:[EMAIL PROTECTED]]
Sent: Friday, December 22, 2000 12:00 PM
To: Linux-Mandrake Newbie
Subject: [newbie] Ping Error
Something is seriously wrong with
"Mr. Smith" wrote:
I would like to know if it is possible (I am pretty sure it is) to create a
bootdisk on a cd. I would like to know because I am using Mandrake, BeOS
(free), and Winblows. I find the floppy slightly...slow. So I was just
wondering how I could create a bootdisk to launch
A little helpful advice. Post more information.
You most likely have a winmodem. Most winmodems will NOT work with linux.
They used a software based driver. They are pci. So if you have a pci modem.
It is most likely a winmodem. And will NOT work.
-Original Message-
From: Mike
Try upgradeing your KDElibs/KDEsoundlibs. There should be new versions
available in MandrakeUpdate. That's what got my live value working in
KDE.
Try using drakconf and it's "hardware configuration" to set it up.
try insmod emu10k1, not that alsa drive too.
steve d...
On Friday 22 December
Hi Fellow-Penguin Newbies!
When I disconnect my Primary Server from service- I
want the Secondary server to automatically take over
providingthewebsites I am Hosting.
My question is:
Does MY DNS Info at the Open SRS Database
tell the world to look at my Primary IP and if it is "down" will
when I try to look up the partition using pqmagic, it report partition error!(I have
used pqmagic to do some partition operations).at last I delete all the partition
except c using fdisk and reinstall mandrake, you guess what? it works!!!
you'll have to be very careful when using the
Don't know if it is like this, but my Windows 98 regularly switches drive
letters on me between my second partition HDD, and my Zip drive, supposed to
be E:. I regularly wind up with the letters reversed, and shortcuts not
working, etc. You might check to see if Windows is calling it something
Please can you not use HTML when emailing to the list. It can be very
annoying to some of us. I see that you are usign MS Outlook, you can turn
HTML of by clicking Format - Plain Text or type ALT o x.
Sorry I don't know how to solve your problem, but maybe some one else will.
Thanks Mark Hillary
On Fri, 22 Dec 2000, Steven Duhaime wrote:
Yes. It would have to, right? Netscape is a graphics app...
Paul
What user was cron trying to run netscape as?
try looking at netscape --help there might be some info on how to
direct it to a certain display.
Perhaps that would do something.
On Fri, 22 Dec 2000, Tagbo Ekwueme-Okoli wrote:
Does know how to install WordPerfect 8 for linux on LM 7.2?
Thanks
Untar the install files, change to root, run ./runme and make sure you do
not install from a dir that has spaces in the name.
Paul
--
To do the exact opposite is a form of
http://www.crosswinds.net/~dopeybatman/example.jpg
Ok. I found a howto that told me to run modprobe sound to see if my sound
card was working corectly. So I did but it didn't have output...not exactly
what I wanted so I used the wildcard and it came up with this information
(see screenshot).
I went into the kde and used one of the configuration tools (can't remember
which) and it reported that my Sound Blaster Live Value and nVidia Riva TNT2
were sharing the same interrupt on 11. Also my Ethernet and USB were on the
same and they were on 09. Can anyone help me fix this?
Thanks
Hi, I will se if I can help.
What sound card is it. Also what is the problem with it?, is it not
producing any sound or what. lsmod can tell you what modules are loaded.
Mark Hillary
- Original Message -
From: "Mr. Smith" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, December
Mark,
In the event that you have one or more large files eating
this space, you could use the find command to locate them.
Start high, and keep doing it, dropping the size by a couple
meg each time. The syntax would be like this:
find / -size x -print
or to look in your /home directories,
Hello,how do I tar,gunzip files to a scsi tape drive? I have read the man
page but dont understand them.Also,how can I find out what device name
Mandrake 7.2 has given to the drive,cant find it listed any where.I guess I
am not looking in the right place.Thanks for all your help...
OK, I just spoke with a guy on the expert list who has the same CD-RW as I
have, and he said his worked in 7.1, but not 7.2. So, since I want to keep
7.2, I figure I'll just make a small partition and put 7.1 on it...But
there's one thing I need to be sure about first. Right now, I'm using the
Merry Christmas to all, and to all a great New Year...
Kmail defaults to metric page size, i.e. A4.
How do I get it to default to US letter size 8.5" x 11"?
Jim T.
MERRY CRIMBO EVERYBODY :-D
(Ive got 142 cans of beer and a bottle of Glenfiddich...)
So you wont get any sense from me for a while ;-)
Have a good one
Monster
Lost somewhere in Scotland lol
On Friday 22 December 2000 10:58 pm, you wrote:
Merry Christmas to all, and to all a great New
Sorry, I'm Sorry, Please forgive me. I'm SOrry. Please Forgive Me.
Please I'm SOrry. Sorry. Please. Oh Please forgive my mistake. Oh HTML Sorry
Oh Please. Sorry...
I'm Sorry.
- Original Message -
From: "Mark Hillary" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, December 22,
Is it just me, or does this sound a little sarcastic?
peace,
Rog
http://www.slammingrooves.com
Registered Linux user #190719
On Fri, 22 Dec 2000, Beckycould wrote:
Sorry, I'm Sorry, Please forgive me. I'm SOrry. Please Forgive Me.
Please I'm SOrry. Sorry. Please. Oh Please forgive my
Hello Steven,
Friday, December 22, 2000, 2:55:29 PM, you wrote:
SD did you recently upgrade cdrecord? I seem to recall a friend of mine
SD having trouble after upgrading cdrecord.
SD steve d...
Well probably, I upgraded from 7.1 to 7.2 and the CD-RW was working
just fine in 7.1 hasn't worked
Hello! Last night, I made the jump to Linux. After
getting a copy of Mandrake 7.2 complete, I installed
the software onto my Compaq Laptop LTE 5400.
This is was a step that I had feared for a long time,
but I must say, that the auto-detect made the install
very, very slick. Now, I have a Linux
Roger Sherman wrote:
Is it just me, or does this sound a little sarcastic?
peace,
Rog
I think so. We all now know that Beckycould. We just can't believe that
Beckywould. The question, however, is if Beckyshould;-)
Have a Great Christmas!!
Michael
get your CD...and look for kppp rpm...in the rpm folder.
it's there...
next...bring up a terminal...and when you get a prompt...
type
su
this means "Switch User"
it will then ask you for roots password, give it the
password...
then after you press the enter/return key, type:
kpackage
this is
More information please.
What sort of modem is it? Brand, model name, internal/external?
Mike wrote:
hi, ive just installed mandrake 7.1.
my modem dont respond or anything what shall i do?
thanks
mike
--
Society
Roger Sherman wrote:
Is it just me, or does this sound a little sarcastic?
It's hard to tell in email.
I tend to respond as if it were serious. If it was serious then
it's the right response. If it wasn't serious then your pleasant
reply will be irritating.
You can't lose. :)
a little sarcasm is good fer what ails ya.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Michael
Sent: Friday, December 22, 2000 7:52 PM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Im Sorry,
Roger Sherman wrote:
Is it just me, or does this sound a
Adrian Gunawan wrote:
how can i uninstall XFree86-server ?
because i want to upgrade to the new one but it can't
upgrade it said the file conflicts with the new
package
if anyone can help me
Hi Adrian. Do a "man RPM" from a shell. Lots of options there including:
--nodeps (will install
Adrian Gunawan wrote:
how can i uninstall XFree86-server ?
because i want to upgrade to the new one but it can't
upgrade it said the file conflicts with the new
package
if anyone can help me
__
Do You Yahoo!?
Yahoo! Shopping -
Erylon Hines wrote:
Graham Kerr wrote:
MERRY CRIMBO EVERYBODY :-D
(Ive got 142 cans of beer and a bottle of Glenfiddich...)
So you wont get any sense from me for a while ;-)
You're in Scotland and you have CANS of beer--when you have all those
wonderful real beers everywhere around
On Friday 22 December 2000 07:41 pm, Adrian Gunawan wrote:
how can i uninstall XFree86-server ?
no need to uninstall
because i want to upgrade to the new one but it can't
upgrade it said the file conflicts with the new
package
if anyone can help me
From what to what? What version
after installation mandrake,how can I get
started?
I want to develop c/c++ program,where should I put the source
code?it is said that the source navigator is the best choice,I have downloaded
SN451.tar.gz and SN451.tar.bz2,but i dont know how to install with this type of
file.
On Friday 22 December 2000 05:43 pm, Beckycould wrote:
Sorry, I'm Sorry, Please forgive me. I'm SOrry. Please Forgive Me.
Please I'm SOrry. Sorry. Please. Oh Please forgive my mistake. Oh
HTML Sorry Oh Please. Sorry...
I'm Sorry.
Disingenuous ?
From: "Mark Hillary" [EMAIL
On Friday 22 December 2000 11:50 pm, Michael wrote:
I have
downloaded SN451.tar.gz and SN451.tar.bz2,but i dont know how to
install with this type of file.
thanks Merry Xmas!
good place to start http://mandrakeuser.org/basics/bsource.html
Merry Christmas back at ya ;)
--
Tom Brinkman
On Friday 22 December 2000 10:03 pm, Ronald J. Hall wrote:
I tell ya its just not fair! Here I am, stuck with American beer
(which pales in comparison)... ;-(
Oh well, guess I can grab a Heineken...and drown my sorrows! ;-)
I worked on a Dutch island (Bonaire) some 30 years ago. The
How about you not be a dick about a simple request?
Beckycould wrote:
Sorry, I'm Sorry, Please forgive me. I'm SOrry. Please Forgive Me.
Please I'm SOrry. Sorry. Please. Oh Please forgive my mistake. Oh HTML Sorry
Oh Please. Sorry...
I'm Sorry.
- Original Message -
Does anyone has driver for SiS 6215 ?
or someways that i can get into to Xwindows ?
cause i can't get into Xwindows
thanks
__
Do You Yahoo!?
Yahoo! Shopping - Thousands of Stores. Millions of Products.
http://shopping.yahoo.com/
83 matches
Mail list logo