Please reply privately. Thanks.
-Frank
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=15831t=15831
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure
Hi all,
I have CCNP, ATM and VoIP certified and now preparing for CCIE. I only have
two weeks to go besides I need to work.
Can anyone suggest the most important material to review before going for
the written exam.
Behind me is:
1) Carlow's 2nd edition
2) Free Token Ring paper from CCprep.com
hi,
can any body can tell a good news group for unix and solaris
thanxs
kaushalender
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=15833t=15833
--
FAQ, list archives, and subscription info:
Hi,
This depends on what you are trying to acheive but under most circumstances
one would tend to block the traffic at the entry point. For example, if it
was traffic from the WAN the block it coming in on the WAN interface. If
however you wanted to see the traffic in the router for some
hi
i was trying to access the 2900XL series switch through hyperterminal and
strange thing happened ,it got reset by it on.did this happened with
somebody else also ,just curious to know.what could be the reason
Regards
Arun Sharma
Message Posted at:
consider what happens to PDU's as they traverse networks and media of
various kinds.
device--medium--device--medium--device--medium--device
device = server, workstation, router, switch, hub, repeater, etc
medium = ethernet, token ring, frame-relay, point-to-point, x.25, etc
mix and match all
I heard that the CCIE written like CID. Is it true?
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=15837t=15832
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
The answer is YES and DEFINITELY.
Remember to read the 4 cisco press books for CCNP.
If you understand and remember these 4 books, you can be certified even
without experiment/experience.
Because you are not ask to build a complete network. You just need to
demonstrate that you really
This is more like a chicken egg discussion. Which was first chicken or egg?
Should you have certification first or experience?
Certification is possible without experience but my question is how do you
get experience without certification in this competitive market and IT job
freeze (there are
I sure had that impression. similar approach to protocol behaviour. similar
feel of the questions.
if you passed the CID, and if you have covered the additional material as
several here have recommended, you should be OK.
best wishes
Chuck
-Original Message-
From: [EMAIL PROTECTED]
This one hit my in-box tonight. I'm forwarding the information about the
crack of the wired equivalent privacy ( WEP ) This is far more serious than
the announcement by the Berkeley folks a few weeks ago. I look forward to
Cisco's response.
-Original Message-
From: [EMAIL PROTECTED]
I would agree. It all depends on your network and what you are trying to
achieve with the Acl's.
D'Wayne Saunders
Network Admin
Ph:08 89507742
Fax:08 89521112
Mobile:
www.lasseters.com.au
World's First Government Licensed and Regulated Online Casino...
It was posted:
System management protocols such as SNMP definitely are application
layer. Routing protocols are layer management protocols of the same layer as
the addresses for which they are computing routes. OSPF, ISIS, etc., are
layer 3 management protocols. 802.1d is a layer 2
I will be out of the office starting 08/13/2001 and will not return until
08/17/2001.
I will respond to your message when I return.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=15846t=15846
--
FAQ, list archives, and
Hi guys
Please assist in the configuration of callback on the 2600. For some
reason, it does not work. Underneath please find a copy of my config.
Your assistance will be highly appreciated.
2600#sh run
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug
Dear All,
Sorry for the stupid question but I want to confirm it.
I have to configure my PIX 515UR bundle...
How can I know the primary unit from the secondary unit??
Is that from the failover cable only OR there is an other thing marked the
unit as primary or secondary???
Please advice me
yes, actually, this happened to me w/ out servers switch :( in production. i
never got a clear answer as to why this happened, but i'm never plugging
into a 2900 console port in production w/ a windows box again.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=15850t=15835
Can anyone tell me if you are able to use a loopback address in a static
route. For example
ip route x.x.x.x y.y.y.y 196.8.87.17
x.x.x.x y.y.y.y being the loopback address.
Thanks
Mike
__
Disclaimer and confidentiality note
Everything in this
Sure, except that you might defeat the purpose of having a loopback address
by doing this. Say you've got a scenario where you have two routers
connected by three separate connections:
/-\
O---O
\_/
If you specify the next hop of the loopback to be just *one* of the
interfaces on the other
Yes, you can.
- Original Message -
From: Hawthorne, Mike MM
To:
Sent: Monday, 13 August, 2001 14:08
Subject: Static routes [7:15851]
Can anyone tell me if you are able to use a loopback address in a static
route. For example
ip route x.x.x.x y.y.y.y 196.8.87.17
x.x.x.x y.y.y.y
Hey there its Mr Mellow. I wasn't talking to you I thought you only got
fired up when provoked. O, and mellow, that spelling thing bounces of me and
sticks to you cause I rubber and you are glue.
hillarious
- Original Message -
From: nrf
To:
Sent: Friday, August 10, 2001 2:34 PM
Sounds to me like he may have config'd NAT to forward all traffic to his web
server.
Mark
-Original Message-
From: Brian [SMTP:[EMAIL PROTECTED]]
Sent: Monday, August 13, 2001 1:46 AM
To: [EMAIL PROTECTED]
Subject:Re: Friday Follies - IP NAT behaviour [7:15822]
why he
Agreed, and contact your States Attorney Generals office if they are in a
different state you may also want to contact both your and the originating
states AG's office. Like Jon said these guys like to mobilize.
Worked for me on a third party car warrenty. You may also think about small
claims
Hi,
It is the cable only that selects the primary or secondary (it is even
written on the cable). You make the configuration on the primary, and this
will be sigronized with the secondary.
Hope this helps,
bye,
Magdy H. Ibrahim wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi,
Simply say, suppose configuring BGP between Router A and B. Router A
makes a neighbor reference to the connected interface of router B. I
would like to know can I configure ip nat outside on that interface on
router B?
Since once I configure it, after the hold time period, the BGP
Hi there does anyone know which queing implementation is better for video
over ip
in a atm enviorment
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=15857t=15857
--
FAQ, list archives, and subscription info:
I took written today and passed, you should do fine with your material
Regards
Rob
CCNP (CCIE one day)
-Original Message-
From: Kenneth Yeung [SMTP:[EMAIL PROTECTED]]
Sent: 13 August 2001 07:54
To: [EMAIL PROTECTED]
Subject: CCIE Written [7:15832]
Hi all,
I have
I have a Cisco 4000 with 2 serial, 1 token ring and 2 ethernet interface.
However, when a show interfaces command is executed, there is only one
ethernet interface shown.
On the back of the router where the ethernet ports are, one is a typical
10baseT, RJ-45 connection, but the other is AUI
Excellent advice as always Chuck, and if I may be so bold as to add, try it
before you ask. You learn more out of your failures than your successes. You
also learn how to broaden your scope, which will be necessary for your lab,
and I hope that is why we are here.
Password recovery is an example;
Hi
If the NP has one RJ-45 and one AUI then you do not have 2 ethernet ports,
you have one. The NP-1E has one RJ45 and one AUI, the NP-2E has two each.
You use either the AUI or the RJ45, but not both at the same time. To use
one or the other use the interface command media and follow the
In a message dated 8/13/01 8:33:59 AM Central Daylight Time,
[EMAIL PROTECTED] writes:
Installing Network Processor Modules in the
Cisco 4000 Series
HTH,
Rob H.
I have a Cisco 4000 with 2 serial, 1 token ring and 2 ethernet interface.
However, when a show interfaces command is executed,
how is Boson test 3 i am thinking of buying it
Thanks
Felix da Cat
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=15864t=15864
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
It is only a single port ethernet...
You have a choice of AUI or RJ45..
I do not think the 4000M supports a dual ethernet card..
= Original Message From Vik =
I have a Cisco 4000 with 2 serial, 1 token ring and 2 ethernet interface.
However, when a show interfaces command is
They are the same interface
- Original Message -
From: Vik
To:
Sent: Monday, August 13, 2001 6:35 AM
Subject: e0 on 4000-m router [7:15861]
I have a Cisco 4000 with 2 serial, 1 token ring and 2 ethernet interface.
However, when a show interfaces command is executed, there is only
Sounds like a 1 port enet card to me. You have a choice of running either
the aui port or the rj-45 port, but not both. I believe you can select
between by using the media-type command on the interface.
Mark
-Original Message-
From: Vik [SMTP:[EMAIL PROTECTED]]
Sent: Monday,
Figured it out. I had to use the media-type command.
--
Vik Evans - MCSE, CCNA, CCDA
[EMAIL PROTECTED]
Cell: (602) 677-8214
Hm: (480) 633-1888
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=15869t=15869
--
FAQ, list archives,
Hi
The 4000 and 4000M support the NP-1E and NP-2E, the strange part is that the
NP-1E is not supported on the 4500 or 4700 series...
--
John Hardman CCNP MCSE
guyman wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
It is only a single port ethernet...
You have a choice of AUI
On a 2900XL series catalyst only one vlan interface will be up. The others
will be in administratively shutdown state!
Gerwin
- Original Message -
From: Sundar
To:
Sent: Saturday, August 11, 2001 4:00 PM
Subject: Re: VLAN interface remains SHUTDOWN ! ! ! ! ! ! ! [7:15742]
I am not
Hi
Used one many years (95/96) ago before upgrading to a Cat5000. It is a 8 x
10BaseT, 1 x FDDI DAS/2 x FDDI SAS switch - designed primarily as a FDDI
concentrator.
This is a CatOS device, but the software I used is of a very low revision of
CatOS (
has anyone ever used a catalyst 1200. from
Hi All,
I was wondering if anyone has any information or sites
which talk about how to tweak (if this can be done)
IPSec tunnls (via keepalives) from a dial up client to
a VPN5008?
We have a latency of around 800 milliseconds on a
network and we are trying to determine what the
maximum delay
That is like saying, Why get your Bachelor's degree in Computer Science?
What would you do with it?
Should everyone need to work for 5 years before going to college??? Of
course not!!!
Just by studying for the CCNP, the person is learning a ton of valuable
information...
There are things that
I agree. Also, if you get your foot in the door working for a Cisco
Gold Partner, you can always count on TAC to help you if you're stuck
troubleshooting. So in that case - you won't have to worry about your
hiring manager letting you go if you can't figure out how to
troubleshoot a
HI All,
In my joy of passing the written exam, I forgot to thank all of you who
helped with my questions about study material etc.For all of you who have
not written as yet, go through the mails about CCIE written here on
groupstudy and you will have all you need.It helped me a lot to home in
On Cisco Press's web site they are offering a CCNP Certification boxed set.
At the bottom under similiar titles listed are individual books like Cisco
Internetwork Troubleshooting and Building Cisco Remote Access Networks,
etc. Does the books in the new Certification boxed set take the place of
For those who have a CCO login the utility can be found at:
http://www.cisco.com/cgi-bin/tablebuild.pl/rsl
-Original Message-
From: Symon Thurlow [mailto:[EMAIL PROTECTED]]
Sent: Sunday, August 12, 2001 12:17 PM
To: [EMAIL PROTECTED]
Subject: RE: Two CPA2503 questions... [7:14445]
Did anyone get a look at the new edition of Caslow's book Router, Bridges
and Switches for CCIE's? If so, is the new information worth buying the new
edition in addition to the 1st edition that I already own? Thanks
_
Get your
Hello. I'm experiencing huge amounts of fcs errors on my switch.
3/1 91521 fcs errors
3/2 28078 fcs errors
These counters were cleared Friday. I understand that these errors are
usually media related. I've swapped cables so far which has not seemed to
help. I can tell you there is a sun e450
Beside Boson and ccieprep practice questions, can you tell me where I can
get more practice questions for CCIE written exam?
Thanks in advance!
Danny
-
Do You Yahoo!?
Send instant messages get email alerts with Yahoo! Messenger.
Message Posted at:
Though some Cisco documentation says to put it in
parallel to the PIX, Cisco actually prefers three ways
and they all require you to go through the PIX.
One way is to have the public interface of the VPN to
be in the DMZ. This way the only traffic that hits the
VPN has been through the firewall
Thats impossible or highly not recommended, most of us here work for a
partner and pricing has a lot to do with your partner status. A general
price list could be obtained by Cisco. They will be happy to send someone
out.
- Original Message -
From: Shahir Boshra
To:
Sent: Monday,
I have both books. I would recommend the 2nd edition. The 2nd edition
covers QoS and VoIP along with other topic not covered in the 1st edition.
-Eric Lange
-Original Message-
From: Ray Smith [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 13, 2001 11:23 AM
To: [EMAIL PROTECTED]
This is a known bug. I do believe though that the latest IOS fixes it. What
are you running?
a wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
hi
i was trying to access the 2900XL series switch through hyperterminal and
strange thing happened ,it got reset by it on.did this
I have been searching high and low on Cisco's website for information on how
to figure out the hexidecimal values of various Config-Register. Example,
0x2141, 0x102, 0x2142, 0x2102 etc. I would like to know how to figure out
the bit value and be able to tell what each value is trying to
Thanks Frank. You wouldn't happen to have sun boxes giving you problems?
-Original Message-
From: David Eitel
Sent: Monday, August 13, 2001 12:30 PM
To: [EMAIL PROTECTED]
Subject: High FCS errors on cat5505 [7:15885]
Hello. I'm experiencing huge amounts of fcs errors on my switch.
That's not accurate.
I used to receive from Cisco (as a Cisco end-user) a monthly price list in
my previous job.
The standard price list is not so confidential, the partner's markup / share
is confidential though.
If that's really hard to get, can someone just answer me this simple
question?
If I
Presumably, when traversing through the PIX, you will be translating from a
private DMZ address to a Public address. This would require the IPSEC
through NAT option enabled on the VPN 3000, correct?
I have seen several writings stating that using IPSEC through NAT can be a
security concern. I
Anyone with a used 19 Network Rack in good condition to unload at a
reasonable price, preferable in the New York/NJ area for the purpose of
saving on shipping handling? Thanks
_
Get your FREE download of MSN Explorer at
My guess is that there really is only one Ethernet interface, but two
cabling options: AUI or RJ-45.
Use the media-type {10Baset | aui | auto-select} command to select the one
you want. Notice that supposedly auto select should figure out which one
you're using but field experience says that
If you are running BGP on 3640 you are bound to have
problems. Not that it wont work, but it wont be
consistent. Are you running the complete BGP table?
Are there any other stuff like NAT or debug running?.
What is the memory you have on the router.
Recommended router for BGP if you are running
my search on 'config reg bit settings' got me this hit on the first try:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/cis2500/2509/
acsvrug/maint.htm#20837 (
To:
Sent: Monday, August 13, 2001 10:10 AM
Subject: Figuring out Config Register Values [7:15894]
I have been
If your running this implementation with an ISP, chances are they won't use
a technology that has proved buggy: CEF. My recommendation would be to use
the load balancing feature of such IGP routing protocols like OSPF or EIGRP.
khramov wrote in message
news:[EMAIL PROTECTED]...
I am getting
Bri - that sounds good to me! :-) although I find that most people
1. just don't know WHAT to search for... searching on CCO is an art that
evolves using practice, practice, practice, and weeding out the worthless
hits
2. don't know how to find what they searched for in the webpages presented
Yep. On the sun it show some flapping but no errors on the switch side.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=15904t=15885
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report
Are you overloading the nat? Is the neighbor statement on router A pointing
to the nat address of router B? let's see your config
mak wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi,
Simply say, suppose configuring BGP between Router A and B. Router A
makes a neighbor
It will depend on your service provider. CEF has become much more stable in
the latest IOS releases. Sprint uses CEF for load-balancing multiple T1s
where the customer also has Cisco equipment. I don't know about other
providers since I mainly deal with Sprint. Is there anyone else out there
who
I would appreciate some good advice on this from some of you design boys and
girls out there.
I am going to upgrade some of our branch offices from ISDN and DSL to Frame
Relay, and I need to find the best suited devices to do that.
I want to move away from the (now) slow ISDN and unreliable
I believe
2141 will boot from network ignoring nvram
102 will boot from flash using nv
2142 will boot from flash ignoring nv
2102 same as 102 forget what the 2 means
- Original Message -
From: Ray Smith
To:
Sent: Monday, August 13, 2001 10:10 AM
Subject: Figuring out Config Register
are you saying that CEF is buggy?
-Original Message-
From: Scott M. Trieste [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 13, 2001 2:11 PM
To: [EMAIL PROTECTED]
Subject: Re: load balance between 4 T1s [7:15692]
If your running this implementation with an ISP, chances are they won't
You are correct.
Instead of posting a URL I've sometimes given directions page by page to
show how I reached a given topic.
Any thoughts on how to teach CCO navigation?
-Original Message-
From: EA Louie [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 13, 2001 1:10 PM
To: [EMAIL
Hi All,
In my production network, I got kinda the same configuration, but only one
6509 with dual supervisor engines and dual MSFCs configured. The thing is
that this 6509 also run EIGRP and NAT on its MSFCs and things start to get
complicated. Please help me out with this configuration:
- On
For details, pls email me:
[EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=15912t=15912
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and
Sure.
1. start at http://www.cisco.com/univercd/home/home.htm
2. choose Cisco IOS Software - Release 12.0 (or whatever release you're
interested in - I think the Tables of Contents are close to identical from
11.3 thru 12.2, but I leave this verification as an exercise to the reader)
3. Click
The first question is how many locations are we talking about. I would
prefer the 1720 routers. These have the same processor as the 2600's.
Don't worry about the VPN features, just don't configure them and it's not
an issue. These are marketed as VPN routers because of the processing
power.
Thanks Steve,
He he, that was exactly what they told me - however, I have already told
them that I want 50% CIR, and it's not that much difference once you start
looking at the loop prices etc.
Thanks for your input,
OIe
~~~
Ole Drews Jensen
Systems
Hey Ole, we use all 1720s at the lower end clients. The VPN features are
only there if the right IOS is there. The 2600 should be fine. Look at
your routing protocol, if you are using OSPF or something like that, you
may want and probably will have to bump up the ram DRAM in the 1720 to
handle it
Don't people lurk anymore before posting?
William
cc:
Sent by: Subject: I have Troytec /
Cisco research skills are as important as configuration and design skills
and almost as challenging. When you find something that someone else
couldn't find, please tell us how you did it. Page-by-page navigation
instructions are very helpful because they help us learn the structure of
the
Hi All,
I got kinda the same problem, but it is on the real 6509 w/ 2 sup and 2
MSFCs. Based on your message below, it seems to resolve the confusion
between priority in groups. However, beside NAT, I also have EIGRP running.
EIGRP does load balancing on both cards, is there a workaround for
Check for a duplex mis-match on the interface. It is a fairly well know
issue that Sun and Cisco's don't auto negotiate well. Hard code the speed
and duplex on preferably both sides, and you should the FCS errors go away.
__
Thomas Crowe
Senior Systems Engineer /
Hey guys,
My company is using point-to-point frame-relay (64k CIR) between an office
in NY, and an office in Malaysia (Other side of the world).
All of the Malaysian Internet access and email comes through NY first and
then out to the Internet. It is costing us around 5k/month.
We put some
Rik,
When you install the latest version of Call Manager it does a bios check.
If you dont have a supported server (hardware), you wont be able to install
CM. I have heard of a little program floating around Cisco that lets you
install CM on any box (overlooks the BIOS thing).
thanks,
-Brad
Hi everyone.
I would like to know who can provide good reliable datacenter service in NY
city metro area.
Basically, company that I am working for is looking for a datacenter which
we can use it as pickup point for data feed from NYSE and CME (chicago
Merchant Exchange ?) and reroute those data
Depending on how many nodes, manageability wise, pick one router, this maybe
overkill for some sites, but in the long run having one model makes life
easier.
my 2 cent
At 02:42 PM 8/13/01 -0400, Ole Drews Jensen wrote:
I would appreciate some good advice on this from some of you design boys
The maximum delay for keepalives really depend on your phase one and phase
two lifetimes. And if you have an idle timer set for your tunnels and
whatever that value may be. Keepalives are mostly supported by your router
or vpn box. I haven't ran across a client that supported keepalives.
list pricing is pretty much readily available. true, the public tools on CCO
do not provide list pricing. instead they refer you to a Cisco reseller. But
all anyone has to do is ask, and most places I have dealt with have never
had a problem divulging list.
Chuck
-Original Message-
I've seen comments along those lines over on the NANOG group, if that means
anything ;-
Chuck
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Schneider, Matt
Sent: Monday, August 13, 2001 11:43 AM
To: [EMAIL PROTECTED]
Subject: RE: load balance between
These guys have good prices on Cisco equipment...
http://www.lanblvd.com
I have bought 3 x 3548's and 1 x 2924 there so far, and I haven't had
anything to complain about.
They are (should you search on http://www.cnet.com) most often the cheapest
Cisco on-line store out there.
I am
Well done!! Good luck with the lab!
OSN
Ola Shusi wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hi Alll,
I passed my ccie written on saturday. Thanks for all your contribution.
Ola Shusi
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=15930t=15870
The Boson's are really all you'll need .
OSN
Mohammed Nabelsi wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Beside Boson and ccieprep practice questions, can you tell me where I can
get more practice questions for CCIE written exam?
Thanks in advance!
Danny
Hi All,
I have here a Cisco 7204VXR with voice capability, which is having memory
problems.
I have 64Mbytes off memory e the show memory reports:
-
#show version
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-IS-M), Version 12.1(3a)T3,
if in the uk, www.action.com gives a reasonable price
Symon
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Ole Drews Jensen
Sent: 13 August 2001 22:19
To: [EMAIL PROTECTED]
Subject: RE: Off Topic: Cisco Price List [7:15883]
These guys have good
An addition to the following.
From the CCO Home Page - under Service Support go to Technical Support
Help - Cisco TAC. From there go to Top Issues and scroll down. Every major
area is covered.
-Original Message-
From: EA Louie [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 13, 2001
Does anyone have a working config for a 776 or something in that series for
routing? The config on cisco.com stinks. It has PAT enabledI have a
/29 so I don't want PAT. PAT disables all inbound traffic at the router so
I have no clue why their only example for routing includes PAT.
If
Yes, I am working on a 40 node Frame implementation shortly, we are going to
use 3640's at the head office and the 'backup' head office (mainly for
future expansion capability) and 1750's with WIC-1T's. We are going 1750 in
case we move to VoIP at some time in the future (probably not, but hey).
I've seen a few posts in the archives about performing password recovery on
a Lightstream 100, but no answers... Does anyone have a link or instructions
on how to recover the password on one of these?
-chris
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=15937t=15937
If we sit the lab the same day please beat me up afterwards, I dont want to
bleed on the routers.
- Original Message -
From: nrf
To: Donald B Johnson jr
Sent: Monday, August 13, 2001 12:42 PM
Subject: Re: 2501 router... [7:14553]
One other thing. You shouldn't go around talking
Question that has been killing me...
On IOS versions after 12.0, the command #show ip bgp summary gives the
following output:
show ip bgp summary
BGP router identifier 5.5.5.6, local AS number 107
BGP table version is 174, main routing table version 174
13 network entries and 15 paths using
Hello all,
I am new to this forum and i have a question.
I have a server, a hub, a cisco core switch, and another cisco switch which
i want to use as a switching agent.
My question is this how do i connect them all? So far i have figured out how
to connect the core switch to the other cisco
you won't be able to bleed on the routers - the proctor won't let you. You
may, however, bleed on the keyboard and mouse of your workstation.
;-)
- Original Message -
From: Donald B Johnson jr
To:
Sent: Monday, August 13, 2001 3:56 PM
Subject: Re: 2501 router... [7:14553]
If we
Hello Everyone,
I have a question regarding the use of FTP over IPSec. I have IPSec running
from a 3640 router to a 7206. I can do just about every IP service with no
problem except FTP. I say just about because I haven't tested SSH a
couple others yet. Here's the problem when I run FTP
1 - 100 of 118 matches
Mail list logo