A look at the calendar shows me that I am 90 days away. A long time in some
ways. Not much in others. With two Lab attempts behind me, I know all too
well that ninety days is not much time.
On the other hand, I'm a lot more juiced than before. With the announced
removal of some of the trivia, I'm
Hi,
Some days ago, I got an email from a network administrator who reported to me
about some spam mails from some IP Address which belong to my network. When I
investigated about those mails, I underestand the all of spam mails have been
sent without passing from my Mail Server. By the way, I don'
""Tribavan Raina"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> this link is not right avinash.,,would u post the correct link plz..
CL like the man says, it's a link for Cisco employees. on their intranet.
>
>
> Tribavan Raina
>
> -Original Message-
> From: Avinash
True, or the other way around. The knowledge gained by the Security
specialization may help with the CCIE lab. The reason I say this is because
the R&S CCIE Written 350-001 pre-qualification exam blueprint shows
"Security" as a topic you must understand for this exam. This leads me to
believe that
Cisco Press has not yet updated the books for the new version of the test.
All four security classes are undergoing changes.
The latest updates were to the MCNS and PIX courses which have already been
released to Cisco instructors.
The other courses will be forth coming in the future.
See Cisc
That is the supposed dates for release but I have not seen anything in
writing yet.
The beta exams closed on August 22nd so October 1st would be about right.
Christopher M. Heffner
Strategic Network Solutions, Inc.
Certified Cisco Systems Instructor
CCSI, CCIE, MCT, MCNI, CLI, CTT, FCSE, MCSE,
I doubt anybody has the exact dates yet not until they finish grading all
300 betas test for each exam which means 1200 betas test. Then they have to
update and make corrections to the questions on the beta exam before going
live.
There is a email address up under the training page for Cisco for
Yes, from students that I have taught Cisco classes too, this is exactly
what they did. Try to get it done before the new version of the Security
come out. Cisco just finished the beta exams for the new security test so
it should be in the next 4-6 weeks. I have seen the new tests but am told
t
Yes, from students that I have taught Cisco classes too, this is exactly
what they did. Try to get it done before the new version of the Security
come out. Cisco just finished the beta exams for the new security test so
it should be in the next 4-6 weeks. I have seen the new tests but am told
t
Also understand that the Routing test not only has IS-IS materials now from
the BSCI course but also now has router simulations on the test too.
Router simulations are now on the CCNA 640-607, the routing BSCI test and
the BCRAN remote access test.
Best of luck.
Christopher M. Heffner
Strategic
this link is not right avinash.,,would u post the correct link plz..
Tribavan Raina
-Original Message-
From: Avinash Tadimalla [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, September 04, 2002 7:46 AM
To: [EMAIL PROTECTED]
Subject: Re: Router Sims [7:52439]
robert,
if you are a cisco emp
Yeah, you're definitely being naive. Between the hardware and software that
is required to build one, I dont think it's something you could do in your
spare time. Maybe during the course of 2-3 years and trying to reverse
engineer an existing ISDN simulator you could build one. But for the $$$,
Kelly,
What does the debug of the RIPv2 MD5 error look like? Trying
posting it (the debug of the authentication, I mean) to the list, I'm sure
someone have seen the error before and can let you know if you've missed
anything other than what you might have already covered.
Nigel
-
Sorry that Should have read CCIP Study Guide.
Karl
""Krl HUTCHINSON"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> The Todd Lammle CCNA Book by Sybex(recently published)has a complete
section
> on IS-IS plus the rest of the objectives and was highly rated on
Amazon.com.
>
> Ka
How can we prevent the dlsw connection falling back from backup peer to
primary peer when the later comes back alive. The 'linger' option with '0'
sec and the 'no linger' option does not seems to be solving the issue.
Any helpers please...
Message Posted at:
http://www.groupstudy.com/form/read.
Hi there, found this on the cisco website, you may find it helpful...
http://www.cisco.com/warp/public/473/100.html
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52643&t=52616
--
FAQ, list archives, and subscription info: http:/
Heffner Christopher wrote:
> Then go to www.crucial.com for the 32 mb dram simm or simm(s) that you need
> depending upon your current router configuration.
The Crucial Tech part number is CT134951; Cisco P/N is MEM2600-32D=. It's a
32
MB 100-pin DRAM DIMM stick. Thanks to you and Chris for the
All,
I've been trying to obtain a greater understanding of cisco's newest
protocol enhancements technologies/mechanism - GRIP.
http://www.cisco.com/warp/public/732/Tech/grip/learn.shtml
It seems very interesting but seems to address some of the same issues
already
identified by the IETF and
The Todd Lammle CCNA Book by Sybex(recently published)has a complete section
on IS-IS plus the rest of the objectives and was highly rated on Amazon.com.
Karl
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Arun DK
Sent: 03 September 2002 22:14
To: [EMAI
ISDN Simulators are outrageously expensive ranging from $800-00 upwards (and
#800-00 in UK/$1200). Has anyone come across electronic plans or kits to
actually make one of these things up with a soldering iron and some time.
Or am I being terribly naive here
Message Posted at:
http://www.group
It depends upon your background I would say.
Do you have any background or interest in the security side of things.
If you do then the CSS1 is just for more courses and/or tests and probably
could be completed in about 6 months or less.
Understand that all the CSS1 tests are about to change in
Here is the main link on Cisco website for routing protocols.
http://www.cisco.com/public/technotes/tech_protocol.shtml
And here is the direct link for the IS-IS routing protocol.
http://www.cisco.com/warp/public/97/index.shtml
Both are publicly accessable without a CCO account.
Enjoy.
Chris
The first question to ask yourself is if the current 32 mbs of dram is a
single 32 dram simm or 2 - 16 mb dram simms?
Then go to www.crucial.com for the 32 mb dram simm or simm(s) that you need
depending upon your current router configuration.
I just order 12 more on Sunday at a cost of $18.91 a
The current required score is an 849 out of possible 1000 points.
Of course they give you the first 300 points for just showing up for the
test.
Best of Luck on the test. It has gotten harder with the new simulations now
added to the test. Get some practice on a router or two before attempting
Hardware Enthusiasts,
We want to upgrade DRAM (volatile) from 32 MB to 64 MB on our
2600 router (I think it's a 2621).
The existing DRAM chip (clip? or whatever it's called) has this
written on it:
69000178 - C01 - CSC
8MX32 EDO DIMM
0031P0245
Something like that. To order the memory we need a
Hi,
I am preparing for the BSCI exam, but could nopt get any good material on
the ISIS does anybody have any pointer in the CISCO site, which can
provide a comprehensive material ...
Thanks
[GroupStudy.com removed an attachment of type image/gif]
Message Posted at:
http://www.groups
Hi,
My lab date is on 17th October 2002 in Brussels's, and I would like to swap
for a date in early November (before the 4th), or late October (after the
28th). This is due to work related reasons, e.g. major project assigned,
etc. Ideally I would like the date in Brussels's but other locations
I have same issue. My solution was to start focusing on the CCIE Routing and
Switching (still in the process of studying). Theory is that most of the
advanced knowledge gained by CCIE will help with the specializations.
My two pennies,
Michael
>From: "suaveguru"
>Reply-To: "suaveguru"
>To:
Since Boson got a plug here, would it be fair to mention
www.ccxxproductions.com and www.ccbootcamp.com as less expensive
alternatives?
Shawn K.
Disclaimer: I have done work for CCxx Productions and Network Learning, Inc.
(CCBootCamp)
> -Original Message-
> From: Neal Rauhauser [SMTP:[E
Hi Neal
I completed my CCIP a month ago with the BSCI-exam. IMHO the BSCI was much
easier than all the other CCIP exams and even the BSCN. Compared to the BSCN
there's just some additional IS-IS. Further, this exam didn't go much into
deep. To prepare, I used the CCNP preparation guide (cisco pre
There is nothing else I could find. It is a good Book.
Thanks.
Chan
>From: Juan Blanco
>Reply-To: Juan Blanco
>To: [EMAIL PROTECTED], [EMAIL PROTECTED]
>Subject: CSIDS
>Date: Sun, 01 Sep 2002 18:44:56 -0400
>
>Team,
>The Ciscopress CSIDS book is the recommended for test 9E0-572 IDSPM
I am using Router Sim for my CCNP studies. The Simulator from Sybex is
exactly the same as the one from Router Sim. The reason one will see a
difference in their prices is because Router Sim will give you upgrades. I
had this confirmed from their sales rep (six months ago)
Thoughts?
I was able t
robert,
if you are a cisco employee, there is a way to practice without getting
your hands on actual equipment (that's what i am doing - am preparing for
BSCN at the moment)...
take a look at this:
http://www-tac/SPTAC/iou.htm
good luck,
avinash
At 08:54 PM 9/2/2002, Robert L. DeWees wrote:
>Wh
""Marc Russell"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Is your flash read-only? If so just change the config reg and reboot.
of course the flash is read only. same as it was last time I upgraded, and
time before that!
I guess I have to relent and do it the hard way - n
yes indeed this is a bug. corrected in versions later, although it worked in
a previous IOS version that was on my routers that supposedly contained this
particular bug, so I question the accuracy of CCO in this regard.
The resolution:
1) set the config register to 0x2101 and reload so that the
IEEE 802.10 is for FDDI trunks. Are you sure you don't
mean 802.1Q??
The cisco IP 7960 phones (and some other models) can
have a 802.1q trunk connection between the switch and
the phone. The phone will be on the voice or auxillary
VLAN and the open port on the phone will be in data
vlan.
Eric
Magdy,
You did not make it clear what kind of device you are using. If you are
using a PIX or other device with missing or braindead accounting, the
max-sessions feature will not work as expected. Aironet is another
device that is broken. If the device is non-cisco, it probably does not
send a
Most any of us here would be more than happy to assist you. We charge
expenses plus $125.00 per hour and up.
""Ashok C. Braganza"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> 1. Can someone help me in designing the internet network.
>
> I have the following equipments
> 1. C
Yes routing will solve the problem. Also the Cisco, or formerly Cisco
8110 supports a larger enet packet size. The problem with the tagged
frames is that they look like giants, >1518 bytes.
Dave
"Arni V. Skarphedinsson" wrote:
>
> I have the following problem,
>
> I have two locations conn
How about two PVCs in the ATM?
> -Original Message-
> From: Arni V. Skarphedinsson [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, September 03, 2002 10:25 AM
> To: [EMAIL PROTECTED]
> Subject: VLan encap. over WAN [7:52613]
>
>
> I have the following problem,
>
> I have two locations con
Hello all,
Can anyone enlighten me on the behavior of having multiple "ip
helper-address" statements on the same interface? We are setting up a DHCP
solution where we will have two DHCP servers and the Cisco router serving as
the relay agent. If I have two ip helper-address statements
Create a 'bridge-group' by issuing the command on the interfaces you want to
span.
-Original Message-
From: Arni V. Skarphedinsson [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 03, 2002 11:25 AM
To: [EMAIL PROTECTED]
Subject: VLan encap. over WAN [7:52613]
I have the following
I have the following problem,
I have two locations connected bya ATM from a service provide, and I get
ethernet at each end, now I would like to send Vlan tagged frames 802.1q
over the link, as I need to have two IP networks span both sites.
But when I turn tagging on, It does not work, and the
According to the Cisco website, they don't publish passing scores anymore.
They state:
"Cisco does not publish exam passing scores because exam questions and
passing scores are subject to change without notice."
So, even if someone gave you their passing score, yours may not be the same.
See the f
Hi , thanks for the group for your fantastic input on
the exams I have passed so far CCNP , CCDP . What do
you guys think I should take next, CCIE or Security
exams ?
any form of inputs will be greatly appreciated
regards,
suaveguru
__
Do You Yaho
You should be able to do this from the router itself.
However, if the PCMCIA is not recognized on the router you need to format
it on a machine that supports BSD as BSD file system and the one used
with the router are compatible. If by any chance you have access to MAC
OS you will be able to do i
""Ali Khalid Muhammad"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Dear All,
>
> I failed in QOS exam a few days back coz there is no specific book and as
> well paper is new and no one around has taken it. So no idea about it at
> all...I have already passed IP Telephony
FYI
Something you my want to check out if you have a pre 7-2002 MSFC2 with
the default 16M bootflash:
http://www.cisco.com/warp/public/cc/pd/si/casi/ca6000/prodlit/1836_pp.htm
Cisco will upgrade the 16M to 32M free as this will be required to run
the latest code.
Dave
--
David Madland
C
Yep all steps you stated have been covered, but Employees will be
employees.
What can I say?
-Original Message-
From: Elijah Savage III [mailto:[EMAIL PROTECTED]]
Sent: Friday, August 30, 2002 3:49 PM
To: [EMAIL PROTECTED]
Subject: RE: ICQ and blocking the thing-PIX [7:52285]
ICQ no
So true but ICQ is using port 80, which kills me
-Original Message-
From: Creighton Bill-BCREIGH1 [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 29, 2002 12:07 PM
To: [EMAIL PROTECTED]
Subject: RE: ICQ and blocking the thing-PIX [7:52285]
Make sure that you carefully figure out the c
Edward,
be advised that the Lab contents will change on November 4th, so the test
might actually be different from what you expect.
Persio
- Original Message -
From: "Edward Sohn"
To:
Sent: Tuesday, September 03, 2002 9:51 AM
Subject: Lab Swap [7:52603]
> My date is on November 17th
I need a driver to install the PCMCIA flash or disk of Cisco 7200 router on
the labtop to delete or copy files (images to it) any ideas?
[GroupStudy.com removed an attachment of type application/ms-tnef which had
a name of winmail.dat]
Message Posted at:
http://www.groupstudy.com/form/read.ph
My date is on November 17th in SJ, and I would like to swap for an SJ
date in early November (before the 4th), or late October (after the
27th).
Please let me know ASAP if you would like to swap.
Thanks in advance!
Eddie
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52603
Does Anybody know the 640-607 passing score?
Regards,
Ernesto J. Diaz L.
Information Technology
Halliburton Venezuela
Master Vzla: 58.291.652
Office Vzla: 58.291.6502014
Mobile Vzla: 58.416.6912573
Use Track-IT! for all IT Requirements
http://trackit/
[GroupStudy.com r
Just put the keyword log behind your access list and check your log.
deny ip host 10.1.1.1 any log
deny ip 127.0.0.0 0.255.255.255 any log
deny ip 169.254.0.0 0.0.255.255 any log
deny ip 172.16.0.0 0.15.255.255 any log
deny ip 192.168.0.0 0.0.255.255 any log
deny ip 224.0.0.0 3
Dear All,
I failed in QOS exam a few days back coz there is no specific book and as
well paper is new and no one around has taken it. So no idea about it at
all...I have already passed IP Telephony & CVOICE exams but facing
difficulty only with QOS eaxm. If some one has taken this exam and w
Dear
As far as my knowledge you can you dotp and dotq only for voice
If i,ll find some good link that will help you i,ll post it here
bye
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=52599&t=52587
--
FAQ, list archives, and su
Dear All, I failed QOS exam a few days back coz there is no specific book
and as well paper is new and no one around has taken it. So no idea at
all...I have already passed IP Telephony & CVOICE exam but facing
difficulty only with QOS eaxm. If some one has taken this exam and would
like to gi
Go to www.google.com and give a search
anyhow here is the result
http://www.rsasecurity.com/training/certification/
fahim
""Subramanian, Kumaran (CAP)"" wrote in
message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Does anybody know more abt RSA Security certification or where I can
> get more
Hi Marc,
this is likely to be IOS bug CSCdv65027/CSCds28168.
Description:
The command-line interface (CLI) does not prompt for the
erase keyword when the copy [/erase] source-url destination-url EXEC
command is entered. This behaviour does not allow a file system to be erased
using the copy [/er
This is correct when access-list is working as filter in the interface, but
this doesn't affect to access-class in vty.
I have tested in my lab, with access-class apply in vty, router shows next
message when I try to connect to not allowed host:
Trying 10.12.4.4 ...
% Connections to that host n
Hi all,
How much weightage does a 'documentation' at the end of the lab? Do we have
to really break our head to draft this perfect?
I never cared much on my past attempts...I am for the 3rd attempt int 2
weekssomeone help me?
thanks
Message Posted at:
http://www.groupstudy.com/form/read.p
I am not sure what you mean by trunk to the phones..
At Cisco our phones are just host on a subnet...
Larry Letterman
Cisco Systems
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
John Brandis
Sent: Monday, September 02, 2002 11:25
63 matches
Mail list logo